1 files changed, 0 insertions, 67 deletions
diff --git a/c/src/lib/libbsp/powerpc/mvme5500/vme/VMEConfig.h b/c/src/lib/libbsp/powerpc/mvme5500/vme/VMEConfig.h
deleted file mode 100644
index ecc5789899..0000000000
--- a/c/src/lib/libbsp/powerpc/mvme5500/vme/VMEConfig.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef RTEMS_BSP_VME_CONFIG_H
-#define RTEMS_BSP_VME_CONFIG_H
-/* VMEConfig.h, S. Kate Feng modified it for MVME5500 3/04 
- * 
- * May 2011 : Use the VME shared IRQ handlers.
- *
- * It seems that the implementation of VMEUNIVERSE_IRQ_MGR_FLAG_PW_WORKAROUND
- * is not fully developed. The UNIV_REGOFF_VCSR_BS is defined for VME64
- * specification, which does not apply to a VME32 crate. In order to avoid
- * spurious VME interrupts, a better and more universal solution is
- * to flush the vmeUniverse FIFO by reading a register back within the
- * users' Interrupt Service Routine (ISR)  before returning.
- *
- * Some devices might require the ISR to issue an interrupt status READ
- * after its IRQ is cleared, but before its corresponding interrupt
- * is enabled again. 
- * 
- */
-
-/*
- *  Prototypes
- */
-int BSP_VMEInit(void);
-int BSP_VMEIrqMgrInstall(void);
-
-/* BSP specific address space configuration parameters */
-
-/* 
- * The BSP maps VME address ranges into
- * one BAT.
- * NOTE: the BSP (startup/bspstart.c) uses
- * hardcoded window lengths that match this
- * layout:
- */
-#define _VME_A32_WIN0_ON_PCI	        0x90000000
-/* If _VME_CSR_ON_PCI is defined then the A32 window is reduced to accommodate
- * CSR for space.
- */
-#define _VME_CSR_ON_PCI			0x9e000000
-#define _VME_A24_ON_PCI			0x9f000000
-#define _VME_A16_ON_PCI			0x9fff0000
-
-/* Reuse BAT 0 for VME */
-#define BSP_VME_BAT_IDX			0
-
-/* start of the A32 window on the VME bus
- * TODO: this should perhaps be a configuration option
- */
-#define _VME_A32_WIN0_ON_VME	0x20000000
-
-/* if _VME_DRAM_OFFSET is defined, the BSP
- * will map our RAM onto the VME bus, starting
- * at _VME_DRAM_OFFSET
- */
-#define _VME_DRAM_OFFSET		0x90000000
-
-#define BSP_VME_UNIVERSE_INSTALL_IRQ_MGR(err)			\
-	do {											\
-	  err = vmeUniverseInstallIrqMgrAlt(VMEUNIVERSE_IRQ_MGR_FLAG_SHARED,\
-             0, BSP_GPP_VME_VLINT0, \         
-             1, BSP_GPP_VME_VLINT1, \          
-             2, BSP_GPP_VME_VLINT2, \        
-             3, BSP_GPP_VME_VLINT3, \
-             -1 /* terminate list  */);  \             
-	} while (0)
-
-#endif