diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/mvme3100/vme/VMEConfig.h')
| -rw-r--r-- | c/src/lib/libbsp/powerpc/mvme3100/vme/VMEConfig.h | 132 |
1 files changed, 0 insertions, 132 deletions
diff --git a/c/src/lib/libbsp/powerpc/mvme3100/vme/VMEConfig.h b/c/src/lib/libbsp/powerpc/mvme3100/vme/VMEConfig.h deleted file mode 100644 index 10b424c2a8..0000000000 --- a/c/src/lib/libbsp/powerpc/mvme3100/vme/VMEConfig.h +++ /dev/null @@ -1,132 +0,0 @@ -/** - * @file - * - * @ingroup powerpc_vmeconfig - * - * @brief mvme3100 BSP specific address space configuration parameters - */ - -#ifndef RTEMS_BSP_VME_CONFIG_H -#define RTEMS_BSP_VME_CONFIG_H - -/* - * Authorship - * ---------- - * This software was created by - * Till Straumann <strauman@slac.stanford.edu>, 2002..2007, - * Stanford Linear Accelerator Center, Stanford University. - * - * Acknowledgement of sponsorship - * ------------------------------ - * This software was produced by - * the Stanford Linear Accelerator Center, Stanford University, - * under Contract DE-AC03-76SFO0515 with the Department of Energy. - * - * Government disclaimer of liability - * ---------------------------------- - * Neither the United States nor the United States Department of Energy, - * nor any of their employees, makes any warranty, express or implied, or - * assumes any legal liability or responsibility for the accuracy, - * completeness, or usefulness of any data, apparatus, product, or process - * disclosed, or represents that its use would not infringe privately owned - * rights. - * - * Stanford disclaimer of liability - * -------------------------------- - * Stanford University makes no representations or warranties, express or - * implied, nor assumes any liability for the use of this software. - * - * Stanford disclaimer of copyright - * -------------------------------- - * Stanford University, owner of the copyright, hereby disclaims its - * copyright and all other rights in this software. Hence, anyone may - * freely use it for any purpose without restriction. - * - * Maintenance of notices - * ---------------------- - * In the interest of clarity regarding the origin and status of this - * SLAC software, this and all the preceding Stanford University notices - * are to remain affixed to any copy or derivative of this software made - * or distributed by the recipient and are to be affixed to any copy of - * software made or distributed by the recipient that contains a copy or - * derivative of this software. - * - * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03 - */ - -/* - * NOTE: the BSP (startup/bspstart.c) uses - * hardcoded window lengths that match this - * layout: - */ - -#define _VME_A32_WIN0_ON_PCI 0xc0000000 -#define _VME_CSR_ON_PCI 0xce000000 -#define _VME_A24_ON_PCI 0xcf000000 -#define _VME_A16_ON_PCI 0xcfff0000 - -/* start of the A32 window on the VME bus - * TODO: this should perhaps be a run-time configuration option - */ -#define _VME_A32_WIN0_ON_VME 0x20000000 - -/* if _VME_DRAM_OFFSET is defined, the BSP - * will map the board RAM onto the VME bus, starting - * at _VME_DRAM_OFFSET - */ -#define _VME_DRAM_OFFSET 0xc0000000 - -/* If your BSP requires a non-standard way to configure - * the VME interrupt manager then define the symbol - * - * BSP_VME_INSTALL_IRQ_MGR - * - * to a proper instruction sequence that installs the - * universe interrupt manager. This requires knowledge - * of the wiring between the universe and the PIC (main - * interrupt controller), i.e., which IRQ 'pins' of the - * universe are wired to which 'lines'/inputs at the PIC. - * (consult vmeUniverse.h for more information). - * - * When installing the universe IRQ manager it is also - * possible to specify whether it should try to share - * PIC interrupts with other sources. This might not - * be supported by all BSPs (but the unverse driver - * recognizes that). - * - * If BSP_VME_INSTALL_IRQ_MGR is undefined then - * the default algorithm is used (vme_universe.c): - * - * This default setup uses only a single wire. It reads - * the PIC 'line' from PCI configuration space and assumes - * this to be wired to the first (LIRQ0) IRQ input at the - * universe. The default setup tries to use interrupt - * sharing. - */ - -extern int BSP_VMEInit(void); -extern int BSP_VMEIrqMgrInstall(void); - -/** - * @defgroup powerpc_vme BSP_VME_INSTALL_IRQ_MGR Support - * - * @ingroup powerpc_mvme3100 - * - * @brief BSP_VME_INSTALL_IRQ_MGR Support Package - */ -#define BSP_VME_INSTALL_IRQ_MGR(err) \ - do { \ - err = vmeTsi148InstallIrqMgrAlt(\ - VMETSI148_IRQ_MGR_FLAG_SHARED, /* use shared IRQs */ \ - 0, BSP_VME0_IRQ, \ - 1, BSP_VME1_IRQ, \ - 2, BSP_VME2_IRQ, \ - 3, BSP_VME3_IRQ, \ - -1 /* terminate list */ \ - ); \ - } while (0) - -/* This BSP uses the Tsi148 Driver */ -#define _VME_DRIVER_TSI148 - -#endif |