1 files changed, 0 insertions, 124 deletions
diff --git a/c/src/lib/libbsp/bfin/bf537Stamp/include/bsp.h b/c/src/lib/libbsp/bfin/bf537Stamp/include/bsp.h
deleted file mode 100644
index 93f43e86d9..0000000000
--- a/c/src/lib/libbsp/bfin/bf537Stamp/include/bsp.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*  bsp.h
- *
- *  This include file contains all board IO definitions for bf537Stamp.
- *
- *  Copyright (c) 2006 by Atos Automacao Industrial Ltda.
- *             written by Alain Schaefer <alain.schaefer@easc.ch>
- *                    and Antonio Giovanini <antonio@atos.com.br>
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-
-#ifndef LIBBSP_BFIN_BF537STAMP_BSP_H
-#define LIBBSP_BFIN_BF537STAMP_BSP_H
-
-#ifndef ASM
-
-#include <bspopts.h>
-#include <bsp/default-initial-extension.h>
-
-#include <rtems.h>
-#include <rtems/console.h>
-#include <rtems/clockdrv.h>
-
-#include <libcpu/bf537.h>
-#include <libcpu/memoryRegs.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* configure data cache to use 16K of each SRAM bank when enabled */
-#define BSP_DATA_CACHE_CONFIG  (3 << DMEM_CONTROL_DMC_SHIFT)
-
-
-/*
- * PLL and clock setup values:
- */
-
-/*
- *  PLL configuration for bf533Stamp
- *
- *  XTL   =  27 MHz
- *  CLKIN =  13 MHz
- *  VCO   = 391 MHz
- *  CCLK  = 391 MHz
- *  SCLK  = 130 MHz
- */
-
-#define PLL_CSEL    0x0000      /* CCLK = VCO      */
-#define PLL_SSEL    0x0003      /* SCLK = CCLK/3   */
-#define PLL_MSEL    0x3A00      /* VCO = 29xCLKIN  */
-#define PLL_DF      0x0001      /* CLKIN = XTL/2   */
-
-#define CCLK        500000000   /* CORE CLOCK     */
-#define SCLK        100000000   /* SYSTEM CLOCK   */
-
-#define CONSOLE_FORCE_BAUD   57600
-
-/*
- * Blackfin environment memory map
- */
-#define L1_DATA_SRAM_A 0xff800000L
-
-#define FIFOLENGTH 0x100
-
-/*
- *  Simple spin delay in microsecond units for device drivers.
- *  This is very dependent on the clock speed of the target.
- */
-
-#define rtems_bsp_delay( microseconds ) \
-  { \
-  }
-
-/* Constants */
-
-#define RAM_START 0
-#define RAM_END   0x4000000
-
-/* functions */
-
-/*
- * Helper Function to use the EzKits LEDS.
- * Can be used by the Application.
- */
-void setLED(uint8_t value);
-
-/*
- * Helper Function to use the EzKits LEDS
- */
-uint8_t getLEDs(void);
-void setLEDs(uint8_t value);
-uint8_t getButtons(void);
-
-rtems_isr_entry set_vector(                     /* returns old vector */
-  rtems_isr_entry     handler,                  /* isr routine        */
-  rtems_vector_number vector,                   /* vector number      */
-  int                 type                      /* RTEMS or RAW intr  */
-);
-
-/*
- *  Internal BSP methods that are used across file boundaries
- */
-void Init_RTC(void);
-
-/*
- * Network driver configuration
- */
-struct rtems_bsdnet_ifconfig;
-extern int bf537Stamp_network_driver_attach(struct rtems_bsdnet_ifconfig *, int);
-
-#define RTEMS_BSP_NETWORK_DRIVER_NAME   "eth1"
-#define RTEMS_BSP_NETWORK_DRIVER_ATTACH bf537Stamp_network_driver_attach
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* !ASM */
-
-#endif