diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/shared/comm/uart.h')
| -rw-r--r-- | c/src/lib/libbsp/arm/shared/comm/uart.h | 161 |
1 files changed, 0 insertions, 161 deletions
diff --git a/c/src/lib/libbsp/arm/shared/comm/uart.h b/c/src/lib/libbsp/arm/shared/comm/uart.h deleted file mode 100644 index 2f69d57a74..0000000000 --- a/c/src/lib/libbsp/arm/shared/comm/uart.h +++ /dev/null @@ -1,161 +0,0 @@ -/** - * @file - * - * @ingroup arm_comm - * - * @brief UART Support - */ - -/* - * This software is Copyright (C) 1998 by T.sqware - all rights limited - * It is provided in to the public domain "as is", can be freely modified - * as far as this copyight notice is kept unchanged, but does not imply - * an endorsement by T.sqware of the product in which it is included. - * - * Copyright (c) Canon Research France SA.] - * Emmanuel Raguet, mailto:raguet@crf.canon.fr - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rtems.org/license/LICENSE. - */ - -#ifndef _BSPUART_H -#define _BSPUART_H - -void BSP_uart_init(int uart, int baud, int hwFlow); -void BSP_uart_set_baud(int aurt, int baud); -void BSP_uart_intr_ctrl(int uart, int cmd); -void BSP_uart_throttle(int uart); -void BSP_uart_unthrottle(int uart); -int BSP_uart_polled_status(int uart); -void BSP_uart_polled_write(int uart, int val); -int BSP_uart_polled_read(int uart); -void BSP_uart_termios_set(int uart, void *ttyp); -int BSP_uart_termios_write_com1(int minor, const char *buf, int len); -int BSP_uart_termios_write_com2(int minor, const char *buf, int len); -void BSP_uart_termios_isr_com1(); -void BSP_uart_termios_isr_com2(); -void BSP_uart_dbgisr_com1(void); -void BSP_uart_dbgisr_com2(void); -extern unsigned BSP_poll_char_via_serial(void); -extern void BSP_output_char_via_serial(int val); -extern int BSPConsolePort; -extern int BSPBaseBaud; -/* - * Command values for BSP_uart_intr_ctrl(), - * values are strange in order to catch errors - * with assert - */ -#define BSP_UART_INTR_CTRL_DISABLE (0) -#define BSP_UART_INTR_CTRL_GDB (0xaa) /* RX only */ -#define BSP_UART_INTR_CTRL_ENABLE (0xbb) /* Normal operations */ -#define BSP_UART_INTR_CTRL_TERMIOS (0xcc) /* RX & line status */ - -/* Return values for uart_polled_status() */ -#define BSP_UART_STATUS_ERROR (-1) /* No character */ -#define BSP_UART_STATUS_NOCHAR (0) /* No character */ -#define BSP_UART_STATUS_CHAR (1) /* Character present */ -#define BSP_UART_STATUS_BREAK (2) /* Break point is detected */ - -/* PC UART definitions */ -#define BSP_UART_COM1 (0) -#define BSP_UART_COM2 (1) - -/* - * Base IO for UART - */ - -#define COM1_BASE_IO 0x3F8 -#define COM2_BASE_IO 0x2F8 - -/* - * Offsets from base - */ - -/* DLAB 0 */ -#define RBR RSRBR /* Rx Buffer Register (read) */ -#define THR RSTHR /* Tx Buffer Register (write) */ -#define IER RSIER /* Interrupt Enable Register */ - -/* DLAB X */ -#define IIR RSIIR /* Interrupt Ident Register (read) */ -#define FCR RSFCR /* FIFO Control Register (write) */ -#define LCR RSLCR /* Line Control Register */ -#define LSR RSLSR /* Line Status Register */ - -/* DLAB 1 */ -#define DLL RSDLL /* Divisor Latch, LSB */ -#define DLM RSDLH /* Divisor Latch, MSB */ - -/* Uart control */ -#define CNT RSCNT /* General Control register */ - -/* - * define bit for CNT - */ -#define UART_ENABLE 1 -#define PAD_ENABLE 2 - -/* - * Interrupt source definition via IIR - */ -#define NO_MORE_INTR 1 -#define TRANSMITTER_HODING_REGISTER_EMPTY 2 -#define RECEIVER_DATA_AVAIL 4 -#define RECEIVER_ERROR 6 -#define CHARACTER_TIMEOUT_INDICATION 12 - -/* - * Bits definition of IER - */ -#define RECEIVE_ENABLE 0x1 -#define TRANSMIT_ENABLE 0x2 -#define RECEIVER_LINE_ST_ENABLE 0x4 -#define INTERRUPT_DISABLE 0x0 - -/* - * Bits definition of the Line Status Register (LSR) - */ -#define DR 0x01 /* Data Ready */ -#define OE 0x02 /* Overrun Error */ -#define PE 0x04 /* Parity Error */ -#define FE 0x08 /* Framing Error */ -#define BI 0x10 /* Break Interrupt */ -#define THRE 0x20 /* Transmitter Holding Register Empty */ -#define TEMT 0x40 /* Transmitter Empty */ -#define ERFIFO 0x80 /* Error receive Fifo */ - -/* - * Bits definition of the Line Control Register (LCR) - */ -#define CHR_5_BITS 0 -#define CHR_6_BITS 1 -#define CHR_7_BITS 2 -#define CHR_8_BITS 3 - -#define WL 0x03 /* Word length mask */ -#define STB 0x04 /* 1 Stop Bit, otherwise 2 Stop Bits */ -#define PEN 0x08 /* Parity Enabled */ -#define EPS 0x10 /* Even Parity Select, otherwise Odd */ -#define SP 0x20 /* Stick Parity */ -#define BCB 0x40 /* Break Control Bit */ -#define DLAB 0x80 /* Enable Divisor Latch Access */ - -/* - * Bits definition of the FIFO Control Register : WD16C552 or NS16550 - */ - -#define FIFO_CTRL 0x01 /* Set to 1 permit access to other bits */ -#define FIFO_EN 0x01 /* Enable the FIFO */ -#define XMIT_RESET 0x04 /* Transmit FIFO Reset */ -#define RCV_RESET 0x02 /* Receive FIFO Reset */ -#define FCR3 0x08 /* do not understand manual! */ - -#define RECEIVE_FIFO_TRIGGER1 0x0 /* trigger recieve interrupt after 1 byte */ -#define RECEIVE_FIFO_TRIGGER4 0x40 /* trigger recieve interrupt after 4 byte */ -#define RECEIVE_FIFO_TRIGGER8 0x80 /* trigger recieve interrupt after 8 byte */ -#define RECEIVE_FIFO_TRIGGER12 0xc0 /* trigger recieve interrupt after 14 byte */ -#define TRIG_LEVEL 0xc0 /* Mask for the trigger level */ - -#endif /* _BSPUART_H */ |