1 files changed, 0 insertions, 130 deletions
diff --git a/c/src/lib/libbsp/arm/lpc24xx/include/bsp.h b/c/src/lib/libbsp/arm/lpc24xx/include/bsp.h
deleted file mode 100644
index e8c5d9ac12..0000000000
--- a/c/src/lib/libbsp/arm/lpc24xx/include/bsp.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/**
- * @file
- *
- * @ingroup lpc24xx
- *
- * @brief Global BSP definitions.
- */
-
-/*
- * Copyright (c) 2008-2014 embedded brains GmbH.  All rights reserved.
- *
- *  embedded brains GmbH
- *  Dornierstr. 4
- *  82178 Puchheim
- *  Germany
- *  <rtems@embedded-brains.de>
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef LIBBSP_ARM_LPC24XX_BSP_H
-#define LIBBSP_ARM_LPC24XX_BSP_H
-
-#include <bspopts.h>
-
-#define BSP_FEATURE_IRQ_EXTENSION
-
-#define LPC24XX_PCLK (LPC24XX_CCLK / LPC24XX_PCLKDIV)
-
-#define LPC24XX_EMCCLK (LPC24XX_CCLK / LPC24XX_EMCCLKDIV)
-
-#define LPC24XX_MPU_REGION_COUNT 8
-
-#define BSP_ARMV7M_IRQ_PRIORITY_DEFAULT (29 << 3)
-
-#define BSP_ARMV7M_SYSTICK_PRIORITY (30 << 3)
-
-#define BSP_ARMV7M_SYSTICK_FREQUENCY LPC24XX_CCLK
-
-#ifndef ASM
-
-#include <rtems.h>
-#include <rtems/console.h>
-#include <rtems/clockdrv.h>
-
-#include <bsp/default-initial-extension.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-struct rtems_bsdnet_ifconfig;
-
-struct rtems_termios_device_context;
-
-/**
- * @defgroup lpc24xx LPC24XX Support
- *
- * @ingroup bsp_arm
- *
- * @brief LPC24XX support package.
- *
- * @{
- */
-
-/**
- * @brief Network driver attach and detach function.
- */
-int lpc_eth_attach_detach(
-  struct rtems_bsdnet_ifconfig *config,
-  int attaching
-);
-
-/**
- * @brief Standard network driver attach and detach function.
- */
-#define RTEMS_BSP_NETWORK_DRIVER_ATTACH lpc_eth_attach_detach
-
-/**
- * @brief Standard network driver name.
- */
-#define RTEMS_BSP_NETWORK_DRIVER_NAME "eth0"
-
-/**
- * @brief Optimized idle task.
- *
- * This idle task sets the power mode to idle.  This causes the processor clock
- * to be stopped, while on-chip peripherals remain active.  Any enabled
- * interrupt from a peripheral or an external interrupt source will cause the
- * processor to resume execution.
- *
- * To enable the idle task use the following in the system configuration:
- *
- * @code
- * #include <bsp.h>
- *
- * #define CONFIGURE_INIT
- *
- * #define CONFIGURE_IDLE_TASK_BODY bsp_idle_thread
- *
- * #include <confdefs.h>
- * @endcode
- */
-void *bsp_idle_thread(uintptr_t ignored);
-
-#ifdef ARM_MULTILIB_ARCH_V4
-  #define BSP_CONSOLE_UART_BASE 0xe000c000
-#else
-  #define BSP_CONSOLE_UART_BASE 0x4000c000
-#endif
-
-void bsp_restart(void *addr);
-
-bool lpc24xx_uart_probe_1(struct rtems_termios_device_context *context);
-
-bool lpc24xx_uart_probe_2(struct rtems_termios_device_context *context);
-
-bool lpc24xx_uart_probe_3(struct rtems_termios_device_context *context);
-
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* ASM */
-
-#endif /* LIBBSP_ARM_LPC24XX_BSP_H */