diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/dmv177/include')
| -rw-r--r-- | c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in | 36 | ||||
| -rw-r--r-- | c/src/lib/libbsp/powerpc/dmv177/include/bsp.h | 187 | ||||
| -rw-r--r-- | c/src/lib/libbsp/powerpc/dmv177/include/coverhd.h | 134 | ||||
| -rw-r--r-- | c/src/lib/libbsp/powerpc/dmv177/include/dmv170.h | 290 |
4 files changed, 0 insertions, 647 deletions
diff --git a/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in deleted file mode 100644 index a711b3e1de..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in +++ /dev/null @@ -1,36 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - -H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h \ - $(srcdir)/dmv170.h $(srcdir)/../../../shared/tod.h - -# -# Equate files are for including from assembly preprocessed by -# gm4 or gasp. No examples are provided except for those for -# other CPUs. The best way to generate them would be to -# provide a program which generates the constants used based -# on the C equivalents. -# -# If you add equate files, don't forget to uncomment the install line -# below. -# - -EQ_FILES = - -SRCS=$(H_FILES) $(EQ_FILES) - -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: $(SRCS) - $(INSTALL) -m 444 $(H_FILES) $(PROJECT_INCLUDE) diff --git a/c/src/lib/libbsp/powerpc/dmv177/include/bsp.h b/c/src/lib/libbsp/powerpc/dmv177/include/bsp.h deleted file mode 100644 index f99211f8d3..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/include/bsp.h +++ /dev/null @@ -1,187 +0,0 @@ -/* bsp.h - * - * This include file contains all DY-4 DMV170 board IO definitions. - * - * COPYRIGHT (c) 1989-1997. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __DMV170_BSP_h -#define __DMV170_BSP_h - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef ASM -/* Definition of where to store registers in alignment handler */ -#define ALIGN_REGS 0x0140 - -#else -#include <rtems.h> -#include <console.h> -#include <clockdrv.h> -#include <console.h> -#include <iosupp.h> - -#include <dmv170.h> - -#if 0 -#define Enable_Debug() \ - DMV170_WRITE( 0xffffbd0c, 0 ) - -#define Debug_Entry( num ) \ - DMV170_WRITE( 0xffffbd06, num ) -#else -#define Enable_Debug() -#define Debug_Entry( num ) -#endif - -/* - * The following macro calculates the Baud constant. For the Z8530 chip. - */ -#define Z8530_Baud( _frequency, _clock_by, _baud_rate ) \ - ( (_frequency /( _clock_by * 2 * _baud_rate)) - 2) - - -/* - * Define the time limits for RTEMS Test Suite test durations. - * Long test and short test duration limits are provided. These - * values are in seconds and need to be converted to ticks for the - * application. - * - */ - -#define MAX_LONG_TEST_DURATION 300 /* 5 minutes = 300 seconds */ -#define MAX_SHORT_TEST_DURATION 3 /* 3 seconds */ - - -/* - * Stuff for Time Test 27 - */ - -#define MUST_WAIT_FOR_INTERRUPT 1 - -#define Install_tm27_vector( _handler ) \ - set_vector( (_handler), PPC_IRQ_DECREMENTER, 1 ) - -#define Cause_tm27_intr() \ - do { \ - unsigned32 _clicks = 1; \ - asm volatile( "mtdec %0" : "=r" ((_clicks)) : "r" ((_clicks)) ); \ - } while (0) - -#define Clear_tm27_intr() \ - do { \ - unsigned32 _clicks = 0xffffffff; \ - unsigned32 _msr = 0; \ - _ISR_Set_level( 0 ); \ - asm volatile( "mfmsr %0 ;" : "=r" (_msr) : "r" (_msr) ); \ - _msr &= ~0x8000; \ - asm volatile( "mtmsr %0 ;" : "=r" (_msr) : "r" (_msr) ); \ - asm volatile( "mtdec %0" : "=r" ((_clicks)) : "r" ((_clicks)) ); \ - } while (0) - -#define Lower_tm27_intr() \ - do { \ - unsigned32 _msr = 0; \ - _ISR_Set_level( 0 ); \ - asm volatile( "mfmsr %0 ;" : "=r" (_msr) : "r" (_msr) ); \ - _msr |= 0x8002; \ - asm volatile( "mtmsr %0 ;" : "=r" (_msr) : "r" (_msr) ); \ - } while (0) - -/* Constants */ - -/* - * Device Driver Table Entries - */ - -/* - * NOTE: Use the standard Console driver entry - */ - -/* - * NOTE: Use the standard Clock driver entry - */ - - -/* - * Information placed in the linkcmds file. - */ - -extern int RAM_START; -extern int RAM_END; -extern int RAM_SIZE; - -extern int PROM_START; -extern int PROM_END; -extern int PROM_SIZE; - -extern int CLOCK_SPEED; - -extern int end; /* last address in the program */ - -/* - * How many libio files we want - */ - -#define BSP_LIBIO_MAX_FDS 20 - -/* functions */ - -/* - * genvec.c - */ -rtems_isr_entry set_EE_vector( - rtems_isr_entry handler, /* isr routine */ - rtems_vector_number vector /* vector number */ -); -void initialize_external_exception_vector (); - -/* - * console.c - */ -void DEBUG_puts( char *string ); - -void BSP_fatal_return( void ); - - - -void bsp_start( void ); - -void bsp_cleanup( void ); - -rtems_isr_entry set_vector( /* returns old vector */ - rtems_isr_entry handler, /* isr routine */ - rtems_vector_number vector, /* vector number */ - int type /* RTEMS or RAW intr */ -); - -void BSP_fatal_return( void ); - -void bsp_spurious_initialize( void ); - -extern rtems_configuration_table BSP_Configuration; /* owned by BSP */ - -extern rtems_cpu_table Cpu_table; /* owned by BSP */ - -extern rtems_unsigned32 bsp_isr_level; - -extern int CPU_PPC_CLICKS_PER_MS; - -#endif /* ASM */ - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/c/src/lib/libbsp/powerpc/dmv177/include/coverhd.h b/c/src/lib/libbsp/powerpc/dmv177/include/coverhd.h deleted file mode 100644 index 451d13b706..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/include/coverhd.h +++ /dev/null @@ -1,134 +0,0 @@ -/* coverhd.h - * - * This include file has defines to represent the overhead associated - * with calling a particular directive from C. These are used in the - * Timing Test Suite to ignore the overhead required to pass arguments - * to directives. On some CPUs and/or target boards, this overhead - * is significant and makes it difficult to distinguish internal - * RTEMS execution time from that used to call the directive. - * This file should be updated after running the C overhead timing - * test. Once this update has been performed, the RTEMS Time Test - * Suite should be rebuilt to account for these overhead times in the - * timing results. - * - * NOTE: If these are all zero, then the times reported include - * calling overhead including passing of arguments. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -/* - * - * Units are 100ns. - * - * These numbers are of questionable use, as they are developed by calling - * the routine many times, thus getting its entry veneer into the (small) - * cache on the 403GA. This in general is not true of the RTEMS timing - * tests, which usually call a routine only once, thus having no cache loaded - * advantage. - * - * Whether the directive times are useful after deducting the function call - * overhead is also questionable. The user is more interested generally - * in the total cost of a directive, not the cost if the procedure call - * is inlined! (In general this is not true). - * - * Andrew Bray 18/08/1995 - * - */ - -#ifndef __COVERHD_h -#define __COVERHD_h - -#ifdef __cplusplus -extern "C" { -#endif - -#define CALLING_OVERHEAD_INITIALIZE_EXECUTIVE 0 -#define CALLING_OVERHEAD_SHUTDOWN_EXECUTIVE 0 -#define CALLING_OVERHEAD_TASK_CREATE 0 -#define CALLING_OVERHEAD_TASK_IDENT 0 -#define CALLING_OVERHEAD_TASK_START 0 -#define CALLING_OVERHEAD_TASK_RESTART 0 -#define CALLING_OVERHEAD_TASK_DELETE 0 -#define CALLING_OVERHEAD_TASK_SUSPEND 0 -#define CALLING_OVERHEAD_TASK_RESUME 0 -#define CALLING_OVERHEAD_TASK_SET_PRIORITY 0 -#define CALLING_OVERHEAD_TASK_MODE 0 -#define CALLING_OVERHEAD_TASK_GET_NOTE 0 -#define CALLING_OVERHEAD_TASK_SET_NOTE 0 -#define CALLING_OVERHEAD_TASK_WAKE_WHEN 0 -#define CALLING_OVERHEAD_TASK_WAKE_AFTER 0 -#define CALLING_OVERHEAD_INTERRUPT_CATCH 0 -#define CALLING_OVERHEAD_CLOCK_GET 0 -#define CALLING_OVERHEAD_CLOCK_SET 0 -#define CALLING_OVERHEAD_CLOCK_TICK 0 - -#define CALLING_OVERHEAD_TIMER_CREATE 0 -#define CALLING_OVERHEAD_TIMER_IDENT 0 -#define CALLING_OVERHEAD_TIMER_DELETE 0 -#define CALLING_OVERHEAD_TIMER_FIRE_AFTER 0 -#define CALLING_OVERHEAD_TIMER_FIRE_WHEN 0 -#define CALLING_OVERHEAD_TIMER_RESET 0 -#define CALLING_OVERHEAD_TIMER_CANCEL 0 -#define CALLING_OVERHEAD_SEMAPHORE_CREATE 0 -#define CALLING_OVERHEAD_SEMAPHORE_IDENT 0 -#define CALLING_OVERHEAD_SEMAPHORE_DELETE 0 -#define CALLING_OVERHEAD_SEMAPHORE_OBTAIN 0 -#define CALLING_OVERHEAD_SEMAPHORE_RELEASE 0 -#define CALLING_OVERHEAD_MESSAGE_QUEUE_CREATE 0 -#define CALLING_OVERHEAD_MESSAGE_QUEUE_IDENT 0 -#define CALLING_OVERHEAD_MESSAGE_QUEUE_DELETE 0 -#define CALLING_OVERHEAD_MESSAGE_QUEUE_SEND 0 -#define CALLING_OVERHEAD_MESSAGE_QUEUE_URGENT 0 -#define CALLING_OVERHEAD_MESSAGE_QUEUE_BROADCAST 0 -#define CALLING_OVERHEAD_MESSAGE_QUEUE_RECEIVE 0 -#define CALLING_OVERHEAD_MESSAGE_QUEUE_FLUSH 0 - -#define CALLING_OVERHEAD_EVENT_SEND 0 -#define CALLING_OVERHEAD_EVENT_RECEIVE 0 -#define CALLING_OVERHEAD_SIGNAL_CATCH 0 -#define CALLING_OVERHEAD_SIGNAL_SEND 0 -#define CALLING_OVERHEAD_PARTITION_CREATE 0 -#define CALLING_OVERHEAD_PARTITION_IDENT 0 -#define CALLING_OVERHEAD_PARTITION_DELETE 0 -#define CALLING_OVERHEAD_PARTITION_GET_BUFFER 0 -#define CALLING_OVERHEAD_PARTITION_RETURN_BUFFER 0 -#define CALLING_OVERHEAD_REGION_CREATE 0 -#define CALLING_OVERHEAD_REGION_IDENT 0 -#define CALLING_OVERHEAD_REGION_DELETE 0 -#define CALLING_OVERHEAD_REGION_GET_SEGMENT 0 -#define CALLING_OVERHEAD_REGION_RETURN_SEGMENT 0 -#define CALLING_OVERHEAD_PORT_CREATE 0 -#define CALLING_OVERHEAD_PORT_IDENT 0 -#define CALLING_OVERHEAD_PORT_DELETE 0 -#define CALLING_OVERHEAD_PORT_EXTERNAL_TO_INTERNAL 0 -#define CALLING_OVERHEAD_PORT_INTERNAL_TO_EXTERNAL 0 - -#define CALLING_OVERHEAD_IO_INITIALIZE 0 -#define CALLING_OVERHEAD_IO_OPEN 0 -#define CALLING_OVERHEAD_IO_CLOSE 0 -#define CALLING_OVERHEAD_IO_READ 0 -#define CALLING_OVERHEAD_IO_WRITE 0 -#define CALLING_OVERHEAD_IO_CONTROL 0 -#define CALLING_OVERHEAD_FATAL_ERROR_OCCURRED 0 -#define CALLING_OVERHEAD_RATE_MONOTONIC_CREATE 0 -#define CALLING_OVERHEAD_RATE_MONOTONIC_IDENT 0 -#define CALLING_OVERHEAD_RATE_MONOTONIC_DELETE 0 -#define CALLING_OVERHEAD_RATE_MONOTONIC_CANCEL 0 -#define CALLING_OVERHEAD_RATE_MONOTONIC_PERIOD 0 -#define CALLING_OVERHEAD_MULTIPROCESSING_ANNOUNCE 0 - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/c/src/lib/libbsp/powerpc/dmv177/include/dmv170.h b/c/src/lib/libbsp/powerpc/dmv177/include/dmv170.h deleted file mode 100644 index b676dafe0c..0000000000 --- a/c/src/lib/libbsp/powerpc/dmv177/include/dmv170.h +++ /dev/null @@ -1,290 +0,0 @@ -/* dmv170.h - * - * This include file contains information pertaining to the DMV170. - * - * NOTE: Other than where absolutely required, this version currently - * supports only the peripherals and bits used by the basic board - * support package. This includes at least significant pieces of - * the following items: - * - * + UART Channels A and B - * - * COPYRIGHT (c) 1989-1997. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may in - * the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef _INCLUDE_DMV170_h -#define _INCLUDE_DMV170_h - - -/* - * DY-4 uses a non-standard clock for the Exar 88681. - */ - -#undef MC68681_BAUD_RATE_MASK_9600 -#define MC68681_BAUD_RATE_MASK_9600 - -#define DMV17x_MC68681_BAUD_RATE_MASK_9600 - -#if 0 -#define MC68681_OFFSET_MULTIPLIER 8 -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -/* Note: Move address defs to the linker files. XXX */ - -/* Real Time Clock Base Address */ -#define DMV170_RTC_ADDRESS 0xf2c00000 - -/* base address of the DUART (68681) */ -#define MC68681_ADDR 0xf2800000 -#define MC68681_PORT1_ADDR 0xf2800000 -#define MC68681_PORT2_ADDR 0xf2800040 - -/* - * SONIC Information - */ - -#define DMV170_SONIC_ADDR 0xf3000000 - -#define SONIC_BASE_ADDRESS DMV170_SONIC_ADDR -#define SONIC_VECTOR DMV170_ETHERNET_IRQ - -/* base address for the SCC (85C30) */ -#define Z85C30_ADDR 0xfb000010 -#define Z85C30_CTRL_A 0xfb000010 -#define Z85C30_DATA_A 0xfb000018 -#define Z85C30_CTRL_B 0xfb000000 -#define Z85C30_DATA_B 0xfb000008 -#define Z85C30_CLOCK_10 (10485760) /* 10 Mhz */ -#define Z85C30_CLOCK_2 (2581175) /* 2.4616 Mhz */ - -/* base address for the SCV64 */ -#define DMV170_SCV64_BASE_ADDRESS 0xf2000000 - -#define DMV170_LOCAL_CONTROL_STATUS_REG 0xf2400000 -#define DMV170_TIMER0_COUNT_INTERVAL_REG 0xf2400008 -#define DMV170_TIMER1_COUNT_INTERVAL_REG 0xf2400010 -#define DMV170_TIMER2_COUNT_INTERVAL_REG 0xf2400018 -#define DMV170_TIMER_CONTROL_REG 0xf2400020 -#define DMV170_CARD_RESORCE_REG 0xf2400040 - -#define DMV170_WRITE( _reg, _data ) \ - *((volatile rtems_unsigned16 *)(_reg)) = (_data) - -#define DMV170_READ( _reg, _data ) \ - (_data) = *((volatile rtems_unsigned16 *)(_reg)) - -/* - * The following defines the bits in the DMA Control and Status Register - */ - -/* XXX fill in the other bits */ - -#define DMV170_DMA_CONTROL_STATUS_REG 0xfc000090 - -#define DMV170_SCC_10MHZ 0x00010000 - -/* - * The following defines the bits in the Local Control and Status Register. - */ -#define DMV170_IPLx_MASK 0x0007 -#define DMV170_MAXPACK_SENSE_MASK 0x0008 -#define DMV170_MAXPACK_NOT_INSTALLED 0x0008 -#define DMV170_MAXPACK_INSTALLED 0x0000 - -#define DMV170_MAXPACK_RESET_MASK 0x0010 -#define DMV170_MAXPACK_RESET_NEGATE 0x0010 -#define DMV170_MAXPACK_RESET_ASSERT 0x0000 -#define DMV170_EEPROM_READ_WRITE_MASK 0x0020 -#define DMV170_EEPROM_READ 0x0020 -#define DMV170_EEPROM_WRITE 0x0000 -#define DMV170_EEPROM_CLOCK_CTRL_MASK 0x0040 -#define DMV170_EEPROM_CLOCK_ASSERT 0x0040 -#define DMV170_EEPROM_CLOCK_NEGATE 0x0000 -#define DMV170_EEPROM_DATA_MASK 0x0080 -#define DMV170_EEPROM_DATA_HIGH 0x0080 -#define DMV170_EEPROM_DATA_LOW 0x0000 - -/* Bits 8-10: 68040 Transfer Modifer Codes represent the Transfer - * Modifier to be used on MAXPack Accesses. - * - * Bit 11 : 68040 Transfer Type (TT) 0:TT are both low 1:TT are both high - */ - -#define DMV170_USER_LINK0_STATUS_MASK 0x1000 -#define DMV170_USER_LINK0_OPEN 0x1000 -#define DMV170_USER_LINK0_INSTALLED 0x0000 -#define DMV170_LOWER_STATUS_LED_CONTROL_MASK 0x2000 -#define DMV170_LOWER_STATUS_LED_IS_OFF 0x2000 -#define DMV170_LOWER_STATUS_LED_IS_ON 0x0000 -#ifdef DMV176 - /* The following are not available for the DMV171 */ -#define DMV170_RAM_TYPE_MASK 0x4000 -#define DMV170_RAM_TYPE_IS_DRAM 0x4000 -#define DMV170_RAM_TYPE_IS_SRAM 0x0000 -#define DMV170_IACK_VECTOR_AUTOVECTOR_MASK 0x8000 -#define DMV170_IACK_VECTOR_AUTOVECTOR_IS_VECTOR 0x8000 -#define DMV170_IACK_VECTOR_AUTOVECTOR_IS_NOT_VECTOR 0x0000 -#endif - -/* - * The following defines the bits in the Timer Control Register. - */ - -#define DMV170_TIMER0_ENABLE_MASK 0x0001 -#define DMV170_TIMER0_IS_ENABLED 0x0001 -#define DMV170_TIMER0_IS_DISABLED 0x0000 -#define DMV170_TIMER1_ENABLE_MASK 0x0002 -#define DMV170_TIMER1_IS_ENABLED 0x0002 -#define DMV170_TIMER1_IS_DISABLED 0x0000 -#define DMV170_TIMER2_ENABLE_MASK 0x0004 -#define DMV170_TIMER2_IS_ENABLED 0x0004 -#define DMV170_TIMER2_IS_DISABLED 0x0000 -#define DMV170_TIMER1_CLOCK_MASK 0x0008 -#define DMV170_TIMER1_CLOCK_AT_TIMER0 0x0008 -#define DMV170_TIMER1_CLOCK_AT_1MHZ 0x0000 - -#define DMV170_TIMER2_CLOCK_MASK 0x0010 -#define DMV170_TIMER2_CLOCK_AT_TIMER0 0x0010 -#define DMV170_TIMER2_CLOCK_AT_1MHZ 0x0000 -#define DMV170_TIMER0_INTERRUPT_MASK 0x0020 -#define DMV170_TIMER0_INTERRUPT_ENABLE 0x0020 -#define DMV170_TIMER0_INTERRUPT_CLEAR 0x0000 -#define DMV170_TIMER1_INTERRUPT_MASK 0x0040 -#define DMV170_TIMER1_INTERRUPT_ENABLE 0x0040 -#define DMV170_TIMER1_INTERRUPT_CLEAR 0x0000 -#define DMV170_TIMER2_INTERRUPT_MASK 0x0080 -#define DMV170_TIMER2_INTERRUPT_ENABLE 0x0080 -#define DMV170_TIMER2_INTERRUPT_CLEAR 0x0000 - -/* - * The Following define the bits for the Card Resource Register. - */ - -#define DMV170_DUART_INTERRUPT_MASK 0x0001 /* DUART Interrupt Sense Bit */ -#define DMV170_DUART_INTERRUPT_NEGATE 0x0001 -#define DMV170_DUART_INTERRUPT_ASSERT 0x0000 -#define DMV170_SONIC_INTERRUPT_MASK 0x0002 /* SONIC Interrupt Sense Bit */ -#define DMV170_SONIC_INTERRUPT_NEGATE 0x0002 -#define DMV170_SONIC_INTERRUPT_ASSERT 0x0000 -#define DMV170_SCSI_INTERRUPT_MASK 0x0004 /* SCSI Interrupt Sense Bit */ -#define DMV170_SCSI_INTERRUPT_NEGATE 0x0004 -#define DMV170_SCSI_INTERRUPT_ASSERT 0x0000 -#define DMV170_SCC_INTERRUPT_MASK 0x0008 /* SCC Interrupt Sense Bit */ -#define DMV170_SCC_INTERRUPT_NEGATE 0x0008 -#define DMV170_SCC_INTERRUPT_ASSERT 0x0000 -#define DMV170_SNOOP_ENABLE_MASK 0x0010 /* CPU Snoop Enable Bit */ -#define DMV170_SNOOP_DISABLE 0x0010 -#define DMV170_SNOOP_ENABLE 0x0000 -#define DMV170_SONIC_RESET_MASK 0x0020 /* SONIC RESET Control */ -#define DMV170_SONIC_RESET_CLEAR 0x0020 -#define DMV170_SONIC_RESET_HOLD 0x0000 -#define DMV170_NV64_WE_MASK 0x0040 /* 64-bit Non-Volital Memory */ -#define DMV170_NV64_WRITE_ENABLE 0x0040 /* Write Enable */ -#define DMV170_NV64_WRITE_DISABLE 0x0000 -#define DMV170_BOOT_NV16_MASK 0x0080 /* BOOT Device Type */ -#define DMV170_BOOT_64_BIT 0x0080 -#define DMV170_BOOT_16_BIT 0x0000 -#define DMV170_DUART_INST_MASK 0x0100 /* DUART Sense Bit */ -#define DMV170_DUART_INSTALLED 0x0100 -#define DMV170_DUART_NOT_INSTALLED 0x0000 -#define DMV170_SONIC_INST_MASK 0x0200 /* SONIC Sense Bit */ -#define DMV170_SONIC_INSTALLED 0x0200 -#define DMV170_SONIC_NOT_INSTALLED 0x0000 -#define DMV170_16M_NV64_MASK 0x0400 /* 16 Mb of 64bit Flash Sense */ -#define DMV170_16Mb_FLASH_INSTALLED 0x0400 -#define DMV170_8Mb_FLASH_INSTALLED 0x0000 -#define DMV170_SCC_INST_MASK 0x0800 /* SCC Sense Bit */ -#define DMV170_SCC_INSTALLED 0x0800 -#define DMV170_SCC_NOT_INSTALLED 0x0000 -#define DMV170_RTC_INST_MASK 0x1000 /* RTC Sense Bit */ -#define DMV170_RTC_INSTALLED 0x1000 -#define DMV170_RTC_NOT_INSTALLED 0x0000 -#define DMV170_NV64_INST_MASK 0x2000 /* 64bit Non-Volital Mem Sense*/ - -#define DMV170_64_BIT_NON_VOLITAL_MEM_INSTALLED 0x2000 -#define DMV170_64_BIT_NON_VOLITAL_MEM_NOT_INSTALLED 0x0000 - - -/* - * DUART Baud Rate Definitions. - */ - -#define DMV170_DUART_9621 MC68681_BAUD_RATE_MASK_600 /* close to 9600 */ - -#define DMV170_RTC_FREQUENCY 0x0000 - - -/* - * CPU General Purpose Interrupt definations (PPC_IRQ_EXTERNAL). - * Note: For the interrupt level read the lower 3 bits of the - * Local Control and Status Register. - */ - -#define DMV170_IRQ_FIRST ( PPC_IRQ_LAST + 1 ) - -#define DMV170_LIRQ0 ( DMV170_IRQ_FIRST + 0 ) -#define DMV170_LIRQ1 ( DMV170_IRQ_FIRST + 1 ) -#define DMV170_LIRQ2 ( DMV170_IRQ_FIRST + 2 ) -#define DMV170_LIRQ3 ( DMV170_IRQ_FIRST + 3 ) -#define DMV170_LIRQ4 ( DMV170_IRQ_FIRST + 4 ) -#define DMV170_LIRQ5 ( DMV170_IRQ_FIRST + 5 ) -#define DMV170_L7IACF ( DMV170_IRQ_FIRST + 6 ) -#define DMV170_L7ISYS ( DMV170_IRQ_FIRST + 7 ) -#define DMV170_L7IMNI ( DMV170_IRQ_FIRST + 8 ) -#define DMV170_BIMODE ( DMV170_IRQ_FIRST + 9 ) - -#define DMV170_DUART_IRQ DMV170_LIRQ5 -#define DMV170_ETHERNET_IRQ DMV170_LIRQ5 -#define DMV170_SCSI_IRQ DMV170_LIRQ5 -#define DMV170_SCC_IRQ DMV170_LIRQ5 -#define DMV170_MEZZANINE_IRQ_0 DMV170_LIRQ4 -#define DMV170_TICK_IRQ DMV170_LIRQ3 -#define DMV170_LOCATION_MON_IRQ DMV170_LIRQ2 -#define DMV170_SCV64_IRQ DMV170_LIRQ1 -#define DMV170_RTC_IRQ DMV170_LIRQ0 - -#define DMV170_ACFAIL_IRQ DMV170_L7IACF -#define DMV170_SYSFAIL_IRQ DMV170_L7ISYS -#define DMV170_WATCHDOG_IRQ DMV170_L7IMNI -#define DMV170_BI_IRQ DMV170_BIMODE -#define DMV170_RAM_PARITY_IRQ ( DMV170_IRQ_FIRST + 10) -#define DMV170_DARF_BUS_ERROR_IRQ ( DMV170_IRQ_FIRST + 11) -#define DMV170_PERIPHERAL_IRQ ( DMV170_IRQ_FIRST + 12) - -#define MAX_BOARD_IRQS DMV170_PERIPHERAL_IRQ - -#define SCV64_Is_IRQ0( _status ) (_status&0x01) -#define SCV64_Is_IRQ1( _status ) (_status&0x02) -#define SCV64_Is_IRQ2( _status ) (_status&0x04) -#define SCV64_Is_IRQ3( _status ) (_status&0x08) -#define SCV64_Is_IRQ4( _status ) (_status&0x10) -#define SCV64_Is_IRQ5( _status ) (_status&0x20) - - -/* - * scv64.c - */ - -void SCV64_Generate_DUART_Interrupts(); -rtems_unsigned32 SCV64_Get_Interrupt(); -rtems_unsigned32 SCV64_Get_Interrupt_Enable(); - -#ifdef __cplusplus -} -#endif - -#endif /* !_INCLUDE_DMV170_h */ -/* end of include file */ - |