summaryrefslogtreecommitdiff
path: root/c/src/lib/libbsp/powerpc/beatnik/vme/VMEConfig.h
diff options
context:
space:
mode:
Diffstat (limited to 'c/src/lib/libbsp/powerpc/beatnik/vme/VMEConfig.h')
-rw-r--r--c/src/lib/libbsp/powerpc/beatnik/vme/VMEConfig.h112
1 files changed, 112 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/powerpc/beatnik/vme/VMEConfig.h b/c/src/lib/libbsp/powerpc/beatnik/vme/VMEConfig.h
new file mode 100644
index 0000000000..5d3364473e
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/beatnik/vme/VMEConfig.h
@@ -0,0 +1,112 @@
+#ifndef RTEMS_BSP_VME_CONFIG_H
+#define RTEMS_BSP_VME_CONFIG_H
+/* $Id$ */
+
+/* BSP specific address space configuration parameters */
+
+/*
+ * Authorship
+ * ----------
+ * This software ('beatnik' RTEMS BSP for MVME6100 and MVME5500) was
+ * created by Till Straumann <strauman@slac.stanford.edu>, 2005-2007,
+ * Stanford Linear Accelerator Center, Stanford University.
+ *
+ * Acknowledgement of sponsorship
+ * ------------------------------
+ * The 'beatnik' BSP was produced by
+ * the Stanford Linear Accelerator Center, Stanford University,
+ * under Contract DE-AC03-76SFO0515 with the Department of Energy.
+ *
+ * Government disclaimer of liability
+ * ----------------------------------
+ * Neither the United States nor the United States Department of Energy,
+ * nor any of their employees, makes any warranty, express or implied, or
+ * assumes any legal liability or responsibility for the accuracy,
+ * completeness, or usefulness of any data, apparatus, product, or process
+ * disclosed, or represents that its use would not infringe privately owned
+ * rights.
+ *
+ * Stanford disclaimer of liability
+ * --------------------------------
+ * Stanford University makes no representations or warranties, express or
+ * implied, nor assumes any liability for the use of this software.
+ *
+ * Stanford disclaimer of copyright
+ * --------------------------------
+ * Stanford University, owner of the copyright, hereby disclaims its
+ * copyright and all other rights in this software. Hence, anyone may
+ * freely use it for any purpose without restriction.
+ *
+ * Maintenance of notices
+ * ----------------------
+ * In the interest of clarity regarding the origin and status of this
+ * SLAC software, this and all the preceding Stanford University notices
+ * are to remain affixed to any copy or derivative of this software made
+ * or distributed by the recipient and are to be affixed to any copy of
+ * software made or distributed by the recipient that contains a copy or
+ * derivative of this software.
+ *
+ * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
+ */
+
+#define _VME_DRIVER_TSI148
+#define _VME_DRIVER_UNIVERSE
+
+/*
+ * NOTE: the BSP (startup/bspstart.c) uses
+ * hardcoded window lengths that match this
+ * layout when setting BATs:
+ */
+#define _VME_A32_WIN0_ON_PCI 0x90000000
+/* If _VME_CSR_ON_PCI is defined then the A32 window is reduced to accommodate
+ * CSR for space.
+ */
+#define _VME_CSR_ON_PCI 0x9e000000
+#define _VME_A24_ON_PCI 0x9f000000
+#define _VME_A16_ON_PCI 0x9fff0000
+
+/* start of the A32 window on the VME bus
+ * TODO: this should perhaps be a configuration option
+ */
+#define _VME_A32_WIN0_ON_VME 0x20000000
+
+/* if _VME_DRAM_OFFSET is defined, the BSP
+ * will map our RAM onto the VME bus, starting
+ * at _VME_DRAM_OFFSET
+ */
+#define _VME_DRAM_OFFSET 0x90000000
+
+#define BSP_VME_INSTALL_IRQ_MGR(err) \
+ do { \
+ err = -1; \
+ switch (BSP_getBoardType()) { \
+ case MVME6100: \
+ err = theOps->install_irq_mgr( \
+ VMETSI148_IRQ_MGR_FLAG_SHARED, \
+ 0, BSP_IRQ_GPP_0 + 20, \
+ 1, BSP_IRQ_GPP_0 + 21, \
+ 2, BSP_IRQ_GPP_0 + 22, \
+ 3, BSP_IRQ_GPP_0 + 23, \
+ -1); \
+ break; \
+ \
+ case MVME5500: \
+ err = theOps->install_irq_mgr( \
+ VMEUNIVERSE_IRQ_MGR_FLAG_SHARED | \
+ VMEUNIVERSE_IRQ_MGR_FLAG_PW_WORKAROUND, \
+ 0, BSP_IRQ_GPP_0 + 12, \
+ 1, BSP_IRQ_GPP_0 + 13, \
+ 2, BSP_IRQ_GPP_0 + 14, \
+ 3, BSP_IRQ_GPP_0 + 15, \
+ -1); \
+ break; \
+ \
+ default: \
+ printk("WARNING: unknown board; "); \
+ break; \
+ } \
+ if ( err ) \
+ printk("VME interrupt manager NOT INSTALLED (error: %i)\n", err); \
+ } while (0)
+
+#endif