summaryrefslogtreecommitdiff
path: root/c/src/lib/libbsp/m68k/mvme147s/startup
diff options
context:
space:
mode:
Diffstat (limited to 'c/src/lib/libbsp/m68k/mvme147s/startup')
-rw-r--r--c/src/lib/libbsp/m68k/mvme147s/startup/Makefile.in65
-rw-r--r--c/src/lib/libbsp/m68k/mvme147s/startup/bspstart.c181
-rw-r--r--c/src/lib/libbsp/m68k/mvme147s/startup/linkcmds75
3 files changed, 0 insertions, 321 deletions
diff --git a/c/src/lib/libbsp/m68k/mvme147s/startup/Makefile.in b/c/src/lib/libbsp/m68k/mvme147s/startup/Makefile.in
deleted file mode 100644
index eabd6696fb..0000000000
--- a/c/src/lib/libbsp/m68k/mvme147s/startup/Makefile.in
+++ /dev/null
@@ -1,65 +0,0 @@
-#
-# $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../../../../../..
-subdir = c/src/lib/libbsp/m68k/mvme147s/startup
-
-INSTALL = @INSTALL@
-
-RTEMS_ROOT = $(top_srcdir)/@RTEMS_TOPdir@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../mvme147/startup:@srcdir@/../../shared:@srcdir@/../../../shared
-
-PGM=${ARCH}/startup.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES=bspclean bsplibc bsppost bspstart main sbrk setvec
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES=
-
-SRCS=$(srcdir)/linkcmds $(C_FILES) $(H_FILES)
-OBJS=$(C_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here. The config files
-# already know how to delete some stuff, so you may want
-# to just run 'make clean' first to see what gets missed.
-# 'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-${PGM}: ${SRCS} ${OBJS}
- $(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
- $(INSTALL_CHANGE) $(srcdir)/linkcmds ${PROJECT_RELEASE}/lib
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/m68k/mvme147s/startup/bspstart.c b/c/src/lib/libbsp/m68k/mvme147s/startup/bspstart.c
deleted file mode 100644
index 85e6d8fb2a..0000000000
--- a/c/src/lib/libbsp/m68k/mvme147s/startup/bspstart.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * This routine starts the application. It includes application,
- * board, and monitor specific initialization and configuration.
- * The generic CPU dependent initialization has been performed
- * before this routine is invoked.
- *
- * COPYRIGHT (c) 1989-1998.
- * On-Line Applications Research Corporation (OAR).
- * Copyright assigned to U.S. Government, 1994.
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.OARcorp.com/rtems/license.html.
- *
- * MVME147 port for TNI - Telecom Bretagne
- * by Dominique LE CAMPION (Dominique.LECAMPION@enst-bretagne.fr)
- * May 1996
- *
- * $Id$
- */
-
-#include <bsp.h>
-#include <rtems/libio.h>
-
-#include <libcsupport.h>
-
-#include <string.h>
-
-/*
- * The original table from the application and our copy of it with
- * some changes.
- */
-
-extern rtems_configuration_table Configuration;
-rtems_configuration_table BSP_Configuration;
-
-rtems_cpu_table Cpu_table;
-
-char *rtems_progname;
-
-/*
- * Use the shared implementations of the following routines
- */
-
-void bsp_postdriver_hook(void);
-void bsp_libc_init( void *, unsigned32, int );
-
-/*
- * Function: bsp_pretasking_hook
- * Created: 95/03/10
- *
- * Description:
- * BSP pretasking hook. Called just before drivers are initialized.
- * Used to setup libc and install any BSP extensions.
- *
- * NOTES:
- * Must not use libc (to do io) from here, since drivers are
- * not yet initialized.
- *
- */
-
-void bsp_pretasking_hook(void)
-{
- extern int end;
- rtems_unsigned32 heap_start;
-
- heap_start = (rtems_unsigned32) &end;
- if (heap_start & (CPU_ALIGNMENT-1))
- heap_start = (heap_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
-
- bsp_libc_init((void *) heap_start, 64 * 1024, 0);
-
-#ifdef RTEMS_DEBUG
- rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
-#endif
-}
-
-/*
- * bsp_start
- *
- * This routine does the bulk of the system initialization.
- */
-
-void bsp_start( void )
-{
- m68k_isr_entry *monitors_vector_table;
- int index;
- rtems_unsigned8 node_number;
-
- monitors_vector_table = (m68k_isr_entry *)0; /* 147Bug Vectors are at 0 */
- m68k_set_vbr( monitors_vector_table );
-
- for ( index=2 ; index<=255 ; index++ )
- M68Kvec[ index ] = monitors_vector_table[ 32 ];
-
- M68Kvec[ 2 ] = monitors_vector_table[ 2 ]; /* bus error vector */
- M68Kvec[ 4 ] = monitors_vector_table[ 4 ]; /* breakpoints vector */
- M68Kvec[ 9 ] = monitors_vector_table[ 9 ]; /* trace vector */
- M68Kvec[ 47 ] = monitors_vector_table[ 47 ]; /* system call vector */
-
- m68k_set_vbr( &M68Kvec );
-
- pcc->int_base_vector = PCC_BASE_VECTOR & 0xF0;
- /* Set the PCC int vectors base */
-
- /* VME shared memory configuration */
- /* Only the first node shares its top 128k DRAM */
-
- vme_lcsr->utility_interrupt_vector = VME_BASE_VECTOR & 0xF8;
- /* Set VMEchip base interrupt vector */
- vme_lcsr->utility_interrupt_mask |= 0x02;
- /* Enable SIGLP interruption (see shm support) */
- pcc->general_purpose_control &= 0x10;
- /* Enable VME master interruptions */
-
- if (vme_lcsr->system_controller & 0x01) {
- /* the board is system controller */
- vme_lcsr->system_controller = 0x08;
- /* Make VME access round-robin */
- }
-
-
- node_number =
- (rtems_unsigned8)
- (Configuration.User_multiprocessing_table->node - 1) & 0xF;
- /* Get and store node ID, first node_number = 0 */
- vme_gcsr->board_identification = node_number;
-
- vme_lcsr->gcsr_base_address = node_number;
- /* Setup the base address of this board's gcsr */
- vme_lcsr->timer_configuration = 0x6a;
- /* Enable VME time outs, maximum periods */
-
- if (node_number == 0) {
- pcc->slave_base_address = 0x01;
- /* Set local DRAM base address on the VME bus to the DRAM size */
-
- vme_lcsr->vme_bus_requester = 0x80;
- while (! (vme_lcsr->vme_bus_requester & 0x40));
- /* Get VMEbus mastership */
- vme_lcsr->slave_address_modifier = 0xfb;
- /* Share everything */
- vme_lcsr->slave_configuration = 0x80;
- /* Share local DRAM */
- vme_lcsr->vme_bus_requester = 0x0;
- /* release bus */
- } else {
- pcc->slave_base_address = 0;
- /* Set local DRAM base address on the VME bus to 0 */
-
- vme_lcsr->vme_bus_requester = 0x80;
- while (! (vme_lcsr->vme_bus_requester & 0x40));
- /* Get VMEbus mastership */
- vme_lcsr->slave_address_modifier = 0x08;
- /* Share only the short adress range */
- vme_lcsr->slave_configuration = 0;
- /* Don't share local DRAM */
- vme_lcsr->vme_bus_requester = 0x0;
- /* release bus */
- }
-
- vme_lcsr->master_address_modifier = 0;
- /* Automatically set the address modifier */
- vme_lcsr->master_configuration = 1;
- /* Disable D32 transfers : they don't work on my VMEbus rack */
-
- m68k_enable_caching();
-
- /*
- * we only use a hook to get the C library initialized.
- */
-
- Cpu_table.pretasking_hook = bsp_pretasking_hook; /* init libc, etc. */
- Cpu_table.postdriver_hook = bsp_postdriver_hook;
- Cpu_table.interrupt_vector_table = (m68k_isr_entry *) &M68Kvec;
- Cpu_table.interrupt_stack_size = 4096;
-
- BSP_Configuration.work_space_start = (void *)
- (RAM_END - BSP_Configuration.work_space_size);
-
-}
diff --git a/c/src/lib/libbsp/m68k/mvme147s/startup/linkcmds b/c/src/lib/libbsp/m68k/mvme147s/startup/linkcmds
deleted file mode 100644
index 15c1ecf8e8..0000000000
--- a/c/src/lib/libbsp/m68k/mvme147s/startup/linkcmds
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * This file contains directives for the GNU linker which are specific
- * to the Motorola MVME147 boards.
- *
- * COPYRIGHT (c) 1989-1998.
- * On-Line Applications Research Corporation (OAR).
- * Copyright assigned to U.S. Government, 1994.
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.OARcorp.com/rtems/license.html.
- *
- * MVME147 port for TNI - Telecom Bretagne
- * by Dominique LE CAMPION (Dominique.LECAMPION@enst-bretagne.fr)
- * May 1996
- *
- * $Id$
- */
-
-StackSize = DEFINED(StackSize) ? StackSize : 0x1000;
-
-MEMORY
- {
- ram : org = 0x7000, l = 0x3d8fff
- }
-
-SECTIONS
-{
- .text 0x7000 :
- {
- text_start = . ;
- _text_start = . ;
- *(.text)
- . = ALIGN (16);
-
- *(.eh_fram)
- . = ALIGN (16);
-
- /*
- * C++ constructors
- */
- __CTOR_LIST__ = .;
- LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)
- *(.ctors)
- LONG(0)
- __CTOR_END__ = .;
- __DTOR_LIST__ = .;
- LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2)
- *(.dtors)
- LONG(0)
- __DTOR_END__ = .;
- etext = ALIGN( 0x10 ) ;
- _etext = .;
- }
- .data ADDR( .text ) + SIZEOF( .text ):
- {
- data_start = . ;
- _data_start = .;
- *(.data)
- edata = ALIGN( 0x10 ) ;
- _edata = .;
- }
- .bss ADDR( .data ) + SIZEOF( .data ):
- {
- bss_start = . ;
- _bss_start = . ;
- *(.bss)
- *(COMMON)
- . += StackSize; /* XXX -- Old gld can't handle this */
- . = ALIGN (16);
- stack_init = .;
- end = . ;
- _end = . ;
- }
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-02 04:17:00 +0000