diff options
Diffstat (limited to 'c/src/exec/score/cpu')
118 files changed, 0 insertions, 32982 deletions
diff --git a/c/src/exec/score/cpu/Makefile.in b/c/src/exec/score/cpu/Makefile.in deleted file mode 100644 index a4e56fed6e..0000000000 --- a/c/src/exec/score/cpu/Makefile.in +++ /dev/null @@ -1,14 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/directory.cfg - -SUB_DIRS=$(RTEMS_CPU) diff --git a/c/src/exec/score/cpu/a29k/Makefile.in b/c/src/exec/score/cpu/a29k/Makefile.in deleted file mode 100644 index f22da60b68..0000000000 --- a/c/src/exec/score/cpu/a29k/Makefile.in +++ /dev/null @@ -1,83 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - -RELS=$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -# Normally cpu_asm and rtems are assembly files -C_PIECES=cpu rtems -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) - -H_FILES=$(srcdir)/cpu.h $(srcdir)/a29k.h $(srcdir)/a29ktypes.h - -# H_FILES that get installed externally -EXTERNAL_H_FILES = $(srcdir)/asm.h $(srcdir)/amd.ah \ - $(srcdir)/pswmacro.ah $(srcdir)/register.ah - -# Assembly source names, if any, go here -- minus the .s -# Normally cpu_asm and rtems are assembly files -S_PIECES=cpu_asm sig -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) - -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(RELS) - $(INSTALL_VARIANT) -m 444 $(RELS) ${PROJECT_RELEASE}/lib - -$(ARCH)/rtems-cpu.rel: $(OBJS) - $(make-rel) - -# Install the program(s), appending _g or _p as appropriate. -# for include files, just use $(INSTALL) - -preinstall: $(ARCH) \ - $(PROJECT_INCLUDE)/rtems/score/targopts.h \ - ${PROJECT_RELEASE}/lib/bsp_specs - $(INSTALL) -m 444 ${H_FILES} $(PROJECT_INCLUDE)/rtems/score -# we will share the basic cpu file - $(INSTALL) -m 444 ${EXTERNAL_H_FILES} $(PROJECT_INCLUDE) - -$(PROJECT_INCLUDE)/rtems/score/targopts.h: $(ARCH)/targopts.h-tmp - $(INSTALL) -m 444 $(ARCH)/targopts.h-tmp $@ - -# $(ARCH)/targopts.h-tmp rule is in leaf.cfg - -${PROJECT_RELEASE}/lib/bsp_specs: $(ARCH)/bsp_specs.tmp - $(INSTALL) -m 444 $(ARCH)/bsp_specs.tmp $@ - -# $(ARCH)/bsp_specs.tmp rule is in leaf.cfg diff --git a/c/src/exec/score/cpu/a29k/a29k.h b/c/src/exec/score/cpu/a29k/a29k.h deleted file mode 100644 index c22a70d437..0000000000 --- a/c/src/exec/score/cpu/a29k/a29k.h +++ /dev/null @@ -1,59 +0,0 @@ -/* a29k.h - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - * - */ -/* @(#)a29k.h 10/21/96 1.3 */ - -#ifndef _INCLUDE_A29K_h -#define _INCLUDE_A29K_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This file contains the information required to build - * RTEMS for a particular member of the "no cpu" - * family when executing in protected mode. It does - * this by setting variables to indicate which implementation - * dependent features are present in a particular member - * of the family. - */ - -#if defined(a29205) - -#define CPU_MODEL_NAME "a29205" -#define A29K_HAS_FPU 0 - -#else - -#error "Unsupported CPU Model" - -#endif - -/* - * Define the name of the CPU family. - */ - -#define CPU_NAME "AMD 29K" - -/* - * Some bits in the CPS: - */ -#define TD 0x20000 -#define DI 0x00002 - -#ifdef __cplusplus -} -#endif - -#endif /* ! _INCLUDE_A29K_h */ -/* end of include file */ diff --git a/c/src/exec/score/cpu/a29k/a29ktypes.h b/c/src/exec/score/cpu/a29k/a29ktypes.h deleted file mode 100644 index 943a922695..0000000000 --- a/c/src/exec/score/cpu/a29k/a29ktypes.h +++ /dev/null @@ -1,57 +0,0 @@ -/* no_cputypes.h - * - * This include file contains type definitions pertaining to the Intel - * no_cpu processor family. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __NO_CPU_TYPES_h -#define __NO_CPU_TYPES_h - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section defines the basic types for this processor. - */ - -typedef unsigned char unsigned8; /* unsigned 8-bit integer */ -typedef unsigned short unsigned16; /* unsigned 16-bit integer */ -typedef unsigned int unsigned32; /* unsigned 32-bit integer */ -typedef unsigned long unsigned64; /* unsigned 64-bit integer */ - -typedef unsigned16 Priority_Bit_map_control; - -typedef signed char signed8; /* 8-bit signed integer */ -typedef signed short signed16; /* 16-bit signed integer */ -typedef signed int signed32; /* 32-bit signed integer */ -typedef signed long signed64; /* 64 bit signed integer */ - -typedef unsigned32 boolean; /* Boolean value */ - -typedef float single_precision; /* single precision float */ -typedef double double_precision; /* double precision float */ - -typedef void no_cpu_isr; -typedef void ( *no_cpu_isr_entry )( void ); - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/a29k/amd.ah b/c/src/exec/score/cpu/a29k/amd.ah deleted file mode 100644 index 006e7e15e7..0000000000 --- a/c/src/exec/score/cpu/a29k/amd.ah +++ /dev/null @@ -1,531 +0,0 @@ -; /* @(#)amd.ah 1.1 96/05/23 08:56:58, TEI */ -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Initialization values for registers after RESET -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; -: /* $Id$ */ -;* File information and includes. - - .file "amd.ah" - .ident "@(#)amd.ah 1.1 96/05/23 08:56:58, TEI" - - - -; -;* AMD PROCESSOR SPECIFIC VALUES... -; - -; -;* Processor revision levels... -; - -; PRL values: 31-28 27-24 -; Am29000 0 x -; Am29005 1 x -; Am29050 2 x -; Am29035 3 x -; Am29030 4 x -; Am29200 5 x -; Am29205 5 1x -; Am29240 6 0 -; Manx 7 0 -; Cougar 8 0 - - - .equ AM29000_PRL, 0x00 - - .equ AM29005_PRL, 0x10 - - .equ AM29050_PRL, 0x20 - - .equ AM29035_PRL, 0x30 - - .equ AM29030_PRL, 0x40 - - .equ AM29200_PRL, 0x50 - - .equ AM29205_PRL, 0x58 - - .equ AM29240_PRL, 0x60 - - .equ AM29040_PRL, 0x70 - - .equ MANX_PRL, 0x70 - - .equ COUGAR_PRL, 0x80 - -; -;* data structures sizes. -; - .equ CFGINFO_SIZE, 16*4 - - .equ PGMINFO_SIZE, 16*4 - - .equ VARARGS_SPACE, 16*4 - - .equ WINDOWSIZE, 0x80 -; -;* Am29027 Mode registers -; - - .equ Am29027Mode1, 0x0fc00820 - - .equ Am29027Mode2, 0x00001375 - - - -;* Processor Based Equates and Defines - - .equ SIG_SYNC, -1 - - .equ ENABLE, (SM) - - .equ DISABLE, (ENABLE | DI | DA) - - .equ DISABLE_FZ, (FZ | ENABLE | DI | DA) - - .equ CLR_TRAP, (FZ | DA) - - .equ InitOPS, (TD | SM | (3<<IMShift) | DI | DA) - - .equ InitCPS, (TD | SM | (0<<IMShift) | DI | DA) - - .equ InitCPS1, (TD | SM | (0<<IMShift) | DI ) - - .equ CPS_TMR, (SM | (0<<IMShift) | DI) - - .equ CPS_INT0, (TD | SM | (0<<IMShift)) - - .equ CPS_TMRINT0, (SM | (0<<IMShift)) - - .equ InitCFG, 0x0 - - .equ InitRBP, (B0|B1|B2|B3|B4|B5) - - .equ TMC_VALUE, 0xFFFFFF - - .equ TMR_VALUE, (IE | TMC_VALUE) - - - - - - -;* 29205 specific (internal) peripheral initialization constants. - -; Current Processor Status (CPS) Register. -; Old Processor Status Register (OPS). - - .equ DA, 0x00001 - .equ DI, 0x00002 - .equ IMShift,0x2 - .equ SM, 0x00010 - .equ PI, 0x00020 - .equ PD, 0x00040 - .equ WM, 0x00080 - .equ RE, 0x00100 - .equ LK, 0x00200 - .equ FZ, 0x00400 - .equ TU, 0x00800 - .equ TP, 0x01000 - .equ TE, 0x02000 - .equ IP, 0x04000 - .equ CA, 0x08000 - .equ MM, 0x10000 - .equ TD, 0x20000 - -; Configuration Register (CFG) - - .equ CD, 0x01 - .equ CP, 0x02 - .equ BO, 0x04 - .equ RV, 0x08 - .equ VF, 0x10 - .equ DW, 0x20 - .equ CO, 0x40 - .equ EE, 0x80 - .equ IDShift, 8 - .equ CFG_ID, 0x100 - .equ ILShift, 9 - .equ CFG_ILMask, 0x600 - .equ DDShift, 11 - .equ CFG_DD, 0x800 - .equ DLShift, 12 - .equ CFG_DLMask, 0x3000 - .equ PCEShift, 14 - .equ CFG_PCE, 0x4000 - .equ PMBShift, 16 - .equ D16, 0x8000 - .equ TBOShift, 23 - .equ PRLShift, 24 - -; Channel Control Register (CHC) - - .equ CV, 0x1 - .equ NN, 0x2 - .equ TRShift, 2 - .equ TF, 0x400 - .equ PER, 0x800 - .equ LA, 0x1000 - .equ ST, 0x2000 - .equ ML, 0x4000 - .equ LS, 0x8000 - .equ CRShift, 16 - .equ CNTLShift, 24 - .equ CEShift, 31 - .equ WBERShift, 31 - -; Register Bank Protect (RBP) - .equ B0, 0x1 - .equ B1, 0x2 - .equ B2, 0x4 - .equ B3, 0x8 - .equ B4, 0x10 - .equ B5, 0x20 - .equ B6, 0x40 - .equ B7, 0x80 - .equ B8, 0x100 - .equ B9, 0x200 - .equ B10, 0x400 - .equ B11, 0x800 - .equ B12, 0x1000 - .equ B13, 0x2000 - .equ B14, 0x4000 - .equ B15, 0x8000 - -; Timer Counter - - .equ TCVMask, 0xffffff - -; Timer Reload Register - - .equ IE, 0x1000000 - .equ IN, 0x2000000 - .equ OV, 0x4000000 - .equ TRVMAsk, 0xffffff - -; MMU Configuration - - .equ PSShift, 8 - .equ PS0Shift, 8 - .equ PS1Shift, 12 - -; LRU Recommendation (LRU) - .equ LRUMask, 0xff - -; Reason Vector (RSN) - .equ RSNMask, 0xff - -; Region Mapping Address (RMA0 | RMA1) - .equ PBAMask,0xffff - .equ VBAShift, 16 - -; Region Mapping Control (RMC0 | RMC1) - .equ TIDMask, 0xff - .equ RMC_UE, 0x100 - .equ RMC_UW, 0x200 - .equ RMC_UR, 0x400 - .equ RMC_SE, 0x800 - .equ RMC_SW, 0x1000 - .equ RMC_SR, 0x2000 - .equ RMC_VE, 0x4000 - .equ RMC_IO, 0x10000 - .equ RGSShift, 17 - .equ RMC_PGMShift, 22 - -; Instruction breakpoint Control (IBC0 | IBC1) - .equ BPIDMask, 0xff - .equ BTE, 0x100 - .equ BRM, 0x200 - .equ IBC_BSY, 0x400 - .equ BEN, 0x800 - .equ BHO, 0x1000 - -; Cache Data Register (CDR) - .equ CDR_US, 0x1 - .equ P, 0x2 - .equ CDR_V, 0x4 - .equ IATAGShift, 20 - -; Cache Interface Register (CIR) - .equ CPTRShift, 2 - .equ CIR_RW, 0x1000000 - .equ FSELShift, 28 - -; Indirect Pointer A, B, C (IPA, IPB, IPC) - .equ IPShift, 2 - -; ALU Status (ALU) - .equ FCMask, 0x1F - .equ BPShift, 5 - .equ C, 0x80 - .equ Z, 0x100 - .equ N, 0x200 - .equ ALU_V, 0x400 - .equ DF, 0x800 - -; Byte Pointer - .equ BPMask, 0x3 - -; Load/Store Count Remaining (CR) - .equ CRMask, 0xff - -; Floating Point Environment (FPE) - .equ NM, 0x1 - .equ RM, 0x2 - .equ VM, 0x4 - .equ UM, 0x8 - .equ XM, 0x10 - .equ DM, 0x20 - .equ FRMShift, 6 - .equ FF, 0x100 - .equ ACFShift, 9 - -; Integer Environment (INTE) - .equ MO, 0x1 - .equ DO, 0x2 - -; Floating Point Status (FPS) - .equ NS, 0x1 - .equ RS, 0x2 - .equ VS, 0x4 - .equ FPS_US, 0x8 - .equ XS, 0x10 - .equ DS, 0x20 - .equ NT, 0x100 - .equ RT, 0x200 - .equ VT, 0x400 - .equ UT, 0x800 - .equ XT, 0x1000 - .equ DT, 0x2000 - -; Exception Opcode (EXOP) - .equ IOPMask, 0xff - -; TLB Entry Word 0 -; .equ TIDMask, 0xff already defined above - .equ TLB_UE, 0x100 - .equ TLB_UW, 0x200 - .equ TLB_UR, 0x400 - .equ TLB_SE, 0x800 - .equ TLB_SW, 0x1000 - .equ TLB_SR, 0x2000 - .equ TLB_VE, 0x4000 - .equ VTAGShift, 15 - -; TLB Entry Word 1 - .equ TLB_IO, 0x1 - .equ U, 0x2 - .equ TLB_PGMShift, 6 - .equ RPNShift, 10 - -; Am29200 ROM Control bits. - .equ RMCT_DW0Shift, 29 - .equ RMCT_DW1Shift, 21 - .equ RMCT_DW2Shift, 13 - .equ RMCT_DW3Shift, 5 - -; Am29200 DRAM Control bits. - .equ DW3, (1<<18) - .equ DW2, (1<<22) - .equ DW1, (1<<26) - .equ DW0, (1<<30) - - ; Internal peripheral address assignments. - .equ RMCT, 0x80000000 - .equ RMCF, 0x80000004 - .equ DRCT, 0x80000008 - .equ DRCF, 0x8000000C - .equ DRM0, 0x80000010 - .equ DRM1, 0x80000014 - .equ DRM2, 0x80000018 - .equ DRM3, 0x8000001C - .equ PIACT0, 0x80000020 - .equ PIACT1, 0x80000020 - .equ ICT, 0x80000028 - .equ DMCT0, 0x80000030 - .equ DMAD0, 0x80000034 - .ifdef revA - .equ TAD0, 0x80000036 - .equ TCN0, 0x8000003A - .else - .equ TAD0, 0x80000070 ; default - .equ TCN0, 0x8000003C ; default - .endif - .equ DMCN0, 0x80000038 - .equ DMCT1, 0x80000040 - .equ DMAD1, 0x80000044 - .equ DMCN1, 0x80000048 - .equ SPCT, 0x80000080 - .equ SPST, 0x80000084 - .equ SPTH, 0x80000088 - .equ SPRB, 0x8000008C - .equ BAUD, 0x80000090 - .equ PPCT, 0x800000C0 - .equ PPST, 0x800000C1 - .equ PPDT, 0x800000C4 - .equ POCT, 0x800000D0 - .equ PIN, 0x800000D4 - .equ POUT, 0x800000D8 - .equ POEN, 0x800000DC - .equ VCT, 0x800000E0 - .equ TOP, 0x800000E4 - .equ SIDE, 0x800000E8 - .equ VDT, 0x800000EC - - ; Interrupt Controller Register bits. - .equ TXDI, (1<<5) - .equ RXDI, (1<<6) - .equ RXSI, (1<<7) - .equ PPI, (1<<11) - .equ DMA1I, (1<<13) - .equ DMA0I, (1<<14) - .equ IOPIMask, (0xFF<<16) - .equ VDI, (1<<27) - .equ ICT200_I, (TXDI|RXDI|RXSI|PPI|DMA1I|DMA0I|IOPIMask|VDI) - .equ ICT205_I, (TXDI|RXDI|RXSI|PPI|DMA1I|DMA0I|IOPIMask|VDI) - - ; Serial port Initialization bits - .equ NO_PARITY, 0 - - - ; SPST bits - .equ THREShift, 22 - -;* REGISTER Addresses - - .equ ROMCntlRegAddr, 0x80000000 - - .equ ROMCfgRegAddr, 0x80000004 - - .equ DRAMCntlRegAddr, 0x80000008 - - .equ DRAMCfgRegAddr, 0x8000000C - - .equ DRAMMap0RegAddr, 0x80000010 - - .equ DRAMMap1RegAddr, 0x80000014 - - .equ DRAMMap2RegAddr, 0x80000018 - - .equ DRAMMap3RegAddr, 0x8000001C - - .equ PIACntl0RegAddr, 0x80000020 - - .equ PIACntl1RegAddr, 0x80000024 - - .equ INTRCntlRegAddr, 0x80000028 - - .equ DMACntl0RegAddr, 0x80000030 - - .equ DMACntl1RegAddr, 0x80000040 - - .equ SERPortCntlRegAddr, 0x80000080 - - .equ SERPortStatRegAddr, 0x80000084 - - .equ SERPortTHLDRegAddr, 0x80000088 - - .equ SERPortRbufRegAddr, 0x8000008C - - .equ SERPortBaudRegAddr, 0x80000090 - - .equ PARPortCntlRegAddr, 0x800000C0 - - .equ PIOCntlRegAddr, 0x800000D0 - - .equ PIOInpRegAddr, 0x800000D4 - - .equ PIOOutRegAddr, 0x800000D8 - - .equ PIOOutEnaRegAddr, 0x800000DC - - .equ VCTCntlRegAddr, 0x800000E0 - -; -;* Control constants -; - -;* AM29030 Timer related constants. - - .equ TMR_IE, 0x01000000 - - .equ TMR_IN, 0x02000000 - - .equ TMR_OV, 0x04000000 - - .equ TMC_INITCNT, 1613 - -; -;* System initialization values. -; - - .equ __os_version, 0x0001 ; - - .equ STACKSize, 0x8000 ; - - .equ PGMExecMode, 0x0000 ; - - .equ TSTCK_OFST, 28 * 4 - - .equ CSTCK_OFST, 29 * 4 - - .equ TMSTCK_OFST, 30 * 4 - - .equ CMSTCK_OFST, 31 * 4 - - .equ CTXSW_OK, 0xA55A ; ctx switch ok - - .set NV_STARTOFST, 0x20 ; 32 bytes - - .set NV_BAUDOFST, 0x00 ; 00 bytes - - .set reg_cir, 29 - - .set reg_cdr, 30 - - .equ MSG_BUFSIZE, 0x1000 ; serial buffer size - - .equ ILLOPTRAP, 0 - - .equ UATRAP, 1 - - .equ PVTRAP, 5 - - .equ UITLBMISSTRAP, 8 - - .equ UDTLBMISSTRAP, 9 - - .equ TIMERTRAP, 14 - - .equ TRACETRAP, 15 - - .equ XLINXTRAP, 16 - - .equ SERIALTRAP, 17 - - .equ SLOWTMRTRAP, 18 - - .equ PORTTRAP, 19 - - .equ SVSCTRAP, 80 - - .equ SVSCTRAP1, 81 - - .equ V_CACHETRAP, 66 ; - - .equ V_SETSERVICE, 67 ; - - .equ INIT_TIMER, 100 - - .equ DISABLE_TIMER, 101 - - .equ GET_TIMER, 102 - - .equ CLEAR_TIMER, 103 - - .equ V_SPILL, 64 - - .equ V_FILL, 65 - - .equ SIGDFL, 105 diff --git a/c/src/exec/score/cpu/a29k/asm.h b/c/src/exec/score/cpu/a29k/asm.h deleted file mode 100644 index 5622b124ce..0000000000 --- a/c/src/exec/score/cpu/a29k/asm.h +++ /dev/null @@ -1,103 +0,0 @@ -/* asm.h - * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. - * - * - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - * - * !!! THIS FILE DOES NOT APPEAR TO HAVE BEEN USED IN THE 29K PORT !!! - * - * COPYRIGHT: - * - * This file is based on similar code found in newlib available - * from ftp.cygnus.com. The file which was used had no copyright - * notice. This file is freely distributable as long as the source - * of the file is noted. This file is: - * - * COPYRIGHT (c) 1989-1997 - * On-Line Applications Research Corporation (OAR). - * - * $Id$ - */ - -#ifndef __A29K_ASM_h -#define __A29K_ASM_h - -/* - * Indicate we are in an assembly file and get the basic CPU definitions. - */ - -#ifndef ASM -#define ASM -#endif -#include <rtems/score/targopts.h> -#include <rtems/score/asm.h> - -/* - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. - */ - -#ifndef __USER_LABEL_PREFIX__ -#define __USER_LABEL_PREFIX__ _ -#endif - -#ifndef __REGISTER_PREFIX__ -#define __REGISTER_PREFIX__ -#endif - -/* ANSI concatenation macros. */ - -#define CONCAT1(a, b) CONCAT2(a, b) -#define CONCAT2(a, b) a ## b - -/* Use the right prefix for global labels. */ - -#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) - -/* Use the right prefix for registers. */ - -#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) - -/* - * define macros for all of the registers on this CPU - * - * EXAMPLE: #define d0 REG (d0) - */ - -/* - * Define macros to handle section beginning and ends. - */ - - -#define BEGIN_CODE_DCL .text -#define END_CODE_DCL -#define BEGIN_DATA_DCL .data -#define END_DATA_DCL -#define BEGIN_CODE .text -#define END_CODE -#define BEGIN_DATA -#define END_DATA -#define BEGIN_BSS -#define END_BSS -#define END - -/* - * Following must be tailor for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. - */ - -#define PUBLIC(sym) .globl SYM (sym) -#define EXTERN(sym) .globl SYM (sym) - -#endif -/* end of include file */ - - diff --git a/c/src/exec/score/cpu/a29k/cpu.c b/c/src/exec/score/cpu/a29k/cpu.c deleted file mode 100644 index 111533a2ae..0000000000 --- a/c/src/exec/score/cpu/a29k/cpu.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - * AMD 29K CPU Dependent Source - * - * Author: Craig Lebakken <craigl@transition.com> - * - * COPYRIGHT (c) 1996 by Transition Networks Inc. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of Transition Networks not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * Transition Networks makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/score/cpu/no_cpu/cpu.c: - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ -#ifndef lint -static char _sccsid[] = "@(#)cpu.c 10/21/96 1.8\n"; -#endif - -#include <rtems/system.h> -#include <rtems/score/isr.h> -#include <rtems/score/wkspace.h> -#include <rtems/score/thread.h> -#include <stdio.h> -#include <stdlib.h> - -void a29k_ISR_Handler(unsigned32 vector); - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: - * cpu_table - CPU table to initialize - * thread_dispatch - address of disptaching routine - */ - - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch)() /* ignored on this CPU */ -) -{ - unsigned int i; - /* - * The thread_dispatch argument is the address of the entry point - * for the routine called at the end of an ISR once it has been - * decided a context switch is necessary. On some compilation - * systems it is difficult to call a high-level language routine - * from assembly. This allows us to trick these systems. - * - * If you encounter this problem save the entry point in a CPU - * dependent variable. - */ - - _CPU_Thread_dispatch_pointer = thread_dispatch; - - /* - * If there is not an easy way to initialize the FP context - * during Context_Initialize, then it is usually easier to - * save an "uninitialized" FP context here and copy it to - * the task's during Context_Initialize. - */ - - /* FP context initialization support goes here */ - - _CPU_Table = *cpu_table; - - for ( i = 0; i < ISR_NUMBER_OF_VECTORS; i++ ) - { - _ISR_Vector_table[i] = (proc_ptr)NULL; - } -} - -/*PAGE - * - * _CPU_ISR_Get_level - */ - -unsigned32 _CPU_ISR_Get_level( void ) -{ - unsigned32 cps; - - /* - * This routine returns the current interrupt level. - */ - cps = a29k_getops(); - if (cps & (TD|DI)) - return 1; - else - return 0; -} - -/*PAGE - * - * _CPU_ISR_install_raw_handler - */ - -extern void intr14( void ); -extern void intr18( void ); -extern void intr19( void ); - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - /* - * This is where we install the interrupt handler into the "raw" interrupt - * table used by the CPU to dispatch interrupt handlers. - */ - switch( vector ) - { - case 14: - _settrap( vector, intr14 ); - break; - case 18: - _settrap( vector, intr18 ); - break; - case 19: - _settrap( vector, intr19 ); - break; - - default: - break; - } -} - - -/*PAGE - * - * _CPU_ISR_install_vector - * - * This kernel routine installs the RTEMS handler for the - * specified vector. - * - * Input parameters: - * vector - interrupt vector number - * old_handler - former ISR for this vector number - * new_handler - replacement ISR for this vector number - * - * Output parameters: NONE - * - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - *old_handler = _ISR_Vector_table[ vector ]; - - /* - * If the interrupt vector table is a table of pointer to isr entry - * points, then we need to install the appropriate RTEMS interrupt - * handler for this vector number. - */ - - _CPU_ISR_install_raw_handler( vector, new_handler, old_handler ); - - /* - * We put the actual user ISR address in '_ISR_vector_table'. This will - * be used by the _ISR_Handler so the user gets control. - */ - - _ISR_Vector_table[ vector ] = new_handler; -} - -/*PAGE - * - * _CPU_Install_interrupt_stack - */ - -void _CPU_Install_interrupt_stack( void ) -{ -} - -/*PAGE - * - * _CPU_Internal_threads_Idle_thread_body - * - * NOTES: - * - * 1. This is the same as the regular CPU independent algorithm. - * - * 2. If you implement this using a "halt", "idle", or "shutdown" - * instruction, then don't forget to put it in an infinite loop. - * - * 3. Be warned. Some processors with onboard DMA have been known - * to stop the DMA if the CPU were put in IDLE mode. This might - * also be a problem with other on-chip peripherals. So use this - * hook with caution. - */ - -void _CPU_Internal_threads_Idle_thread_body( void ) -{ - - for( ; ; ) - { - } - /* insert your "halt" instruction here */ ; -} - -void a29k_fatal_error( unsigned32 error ) -{ - printf("\n\nfatal error %d, rebooting!!!\n",error ); - exit(error); -} - - /* - * This discussion ignores a lot of the ugly details in a real - * implementation such as saving enough registers/state to be - * able to do something real. Keep in mind that the goal is - * to invoke a user's ISR handler which is written in C and - * uses a certain set of registers. - * - * Also note that the exact order is to a large extent flexible. - * Hardware will dictate a sequence for a certain subset of - * _ISR_Handler while requirements for setting - */ - - /* - * At entry to "common" _ISR_Handler, the vector number must be - * available. On some CPUs the hardware puts either the vector - * number or the offset into the vector table for this ISR in a - * known place. If the hardware does not give us this information, - * then the assembly portion of RTEMS for this port will contain - * a set of distinct interrupt entry points which somehow place - * the vector number in a known place (which is safe if another - * interrupt nests this one) and branches to _ISR_Handler. - * - */ - -void a29k_ISR_Handler(unsigned32 vector) -{ - _ISR_Nest_level++; - _Thread_Dispatch_disable_level++; - if ( _ISR_Vector_table[ vector ] ) - (*_ISR_Vector_table[ vector ])( vector ); - --_Thread_Dispatch_disable_level; - --_ISR_Nest_level; - if ( !_Thread_Dispatch_disable_level && !_ISR_Nest_level && - (_Context_Switch_necessary || _ISR_Signals_to_thread_executing )) - _Thread_Dispatch(); - return; -} diff --git a/c/src/exec/score/cpu/a29k/cpu.h b/c/src/exec/score/cpu/a29k/cpu.h deleted file mode 100644 index 3bc939ca91..0000000000 --- a/c/src/exec/score/cpu/a29k/cpu.h +++ /dev/null @@ -1,983 +0,0 @@ -/* cpu.h - * - * This include file contains information pertaining to the AMD 29K - * processor. - * - * Author: Craig Lebakken <craigl@transition.com> - * - * COPYRIGHT (c) 1996 by Transition Networks Inc. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of Transition Networks not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * Transition Networks makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/score/cpu/no_cpu/cpu_asm.c: - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ -/* @(#)cpu.h 10/21/96 1.11 */ - -#ifndef __CPU_h -#define __CPU_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/score/a29k.h> /* pick up machine definitions */ -#ifndef ASM -#include <rtems/score/a29ktypes.h> -#endif - -extern unsigned int a29k_disable( void ); -extern void a29k_enable( unsigned int cookie ); -extern unsigned int a29k_getops( void ); -extern void a29k_getops_sup( void ); -extern void a29k_disable_sup( void ); -extern void a29k_enable_sup( void ); -extern void a29k_disable_all( void ); -extern void a29k_disable_all_sup( void ); -extern void a29k_enable_all( void ); -extern void a29k_enable_all_sup( void ); -extern void a29k_halt( void ); -extern void a29k_fatal_error( unsigned32 error ); -extern void a29k_as70( void ); -extern void a29k_super_mode( void ); -extern void a29k_context_switch_sup(void); -extern void a29k_context_restore_sup(void); -extern void a29k_context_save_sup(void); -extern void a29k_sigdfl_sup(void); - -/* conditional compilation parameters */ - -/* - * Should the calls to _Thread_Enable_dispatch be inlined? - * - * If TRUE, then they are inlined. - * If FALSE, then a subroutine call is made. - * - * Basically this is an example of the classic trade-off of size - * versus speed. Inlining the call (TRUE) typically increases the - * size of RTEMS while speeding up the enabling of dispatching. - * [NOTE: In general, the _Thread_Dispatch_disable_level will - * only be 0 or 1 unless you are in an interrupt handler and that - * interrupt handler invokes the executive.] When not inlined - * something calls _Thread_Enable_dispatch which in turns calls - * _Thread_Dispatch. If the enable dispatch is inlined, then - * one subroutine call is avoided entirely.] - */ - -#define CPU_INLINE_ENABLE_DISPATCH TRUE - -/* - * Should the body of the search loops in _Thread_queue_Enqueue_priority - * be unrolled one time? In unrolled each iteration of the loop examines - * two "nodes" on the chain being searched. Otherwise, only one node - * is examined per iteration. - * - * If TRUE, then the loops are unrolled. - * If FALSE, then the loops are not unrolled. - * - * The primary factor in making this decision is the cost of disabling - * and enabling interrupts (_ISR_Flash) versus the cost of rest of the - * body of the loop. On some CPUs, the flash is more expensive than - * one iteration of the loop body. In this case, it might be desirable - * to unroll the loop. It is important to note that on some CPUs, this - * code is the longest interrupt disable period in RTEMS. So it is - * necessary to strike a balance when setting this parameter. - */ - -#define CPU_UNROLL_ENQUEUE_PRIORITY TRUE - -/* - * Does RTEMS manage a dedicated interrupt stack in software? - * - * If TRUE, then a stack is allocated in _Interrupt_Manager_initialization. - * If FALSE, nothing is done. - * - * If the CPU supports a dedicated interrupt stack in hardware, - * then it is generally the responsibility of the BSP to allocate it - * and set it up. - * - * If the CPU does not support a dedicated interrupt stack, then - * the porter has two options: (1) execute interrupts on the - * stack of the interrupted task, and (2) have RTEMS manage a dedicated - * interrupt stack. - * - * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - */ - -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK FALSE - -/* - * Does this CPU have hardware support for a dedicated interrupt stack? - * - * If TRUE, then it must be installed during initialization. - * If FALSE, then no installation is performed. - * - * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - */ - -#define CPU_HAS_HARDWARE_INTERRUPT_STACK FALSE - -/* - * Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager? - * - * If TRUE, then the memory is allocated during initialization. - * If FALSE, then the memory is allocated during initialization. - * - * This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE - * or CPU_INSTALL_HARDWARE_INTERRUPT_STACK is TRUE. - */ - -#define CPU_ALLOCATE_INTERRUPT_STACK FALSE - -/* - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? - */ - -#define CPU_ISR_PASSES_FRAME_POINTER 0 - -/* - * Does the CPU have hardware floating point? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored. - * - * If there is a FP coprocessor such as the i387 or mc68881, then - * the answer is TRUE. - * - * The macro name "NO_CPU_HAS_FPU" should be made CPU specific. - * It indicates whether or not this CPU model has FP support. For - * example, it would be possible to have an i386_nofp CPU model - * which set this to false to indicate that you have an i386 without - * an i387 and wish to leave floating point support out of RTEMS. - */ - -#if ( A29K_HAS_FPU == 1 ) -#define CPU_HARDWARE_FP TRUE -#else -#define CPU_HARDWARE_FP FALSE -#endif - -/* - * Are all tasks RTEMS_FLOATING_POINT tasks implicitly? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed. - * - * So far, the only CPU in which this option has been used is the - * HP PA-RISC. The HP C compiler and gcc both implicitly use the - * floating point registers to perform integer multiplies. If - * a function which you would not think utilize the FP unit DOES, - * then one can not easily predict which tasks will use the FP hardware. - * In this case, this option should be TRUE. - * - * If CPU_HARDWARE_FP is FALSE, then this should be FALSE as well. - */ - -#define CPU_ALL_TASKS_ARE_FP FALSE - -/* - * Should the IDLE task have a floating point context? - * - * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task - * and it has a floating point context which is switched in and out. - * If FALSE, then the IDLE task does not have a floating point context. - * - * Setting this to TRUE negatively impacts the time required to preempt - * the IDLE task from an interrupt because the floating point context - * must be saved as part of the preemption. - */ - -#define CPU_IDLE_TASK_IS_FP FALSE - -/* - * Should the saving of the floating point registers be deferred - * until a context switch is made to another different floating point - * task? - * - * If TRUE, then the floating point context will not be stored until - * necessary. It will remain in the floating point registers and not - * disturned until another floating point task is switched to. - * - * If FALSE, then the floating point context is saved when a floating - * point task is switched out and restored when the next floating point - * task is restored. The state of the floating point registers between - * those two operations is not specified. - * - * If the floating point context does NOT have to be saved as part of - * interrupt dispatching, then it should be safe to set this to TRUE. - * - * Setting this flag to TRUE results in using a different algorithm - * for deciding when to save and restore the floating point context. - * The deferred FP switch algorithm minimizes the number of times - * the FP context is saved and restored. The FP context is not saved - * until a context switch is made to another, different FP task. - * Thus in a system with only one FP task, the FP context will never - * be saved or restored. - */ - -#define CPU_USE_DEFERRED_FP_SWITCH TRUE - -/* - * Does this port provide a CPU dependent IDLE task implementation? - * - * If TRUE, then the routine _CPU_Internal_threads_Idle_thread_body - * must be provided and is the default IDLE thread body instead of - * _Internal_threads_Idle_thread_body. - * - * If FALSE, then use the generic IDLE thread body if the BSP does - * not provide one. - * - * This is intended to allow for supporting processors which have - * a low power or idle mode. When the IDLE thread is executed, then - * the CPU can be powered down. - * - * The order of precedence for selecting the IDLE thread body is: - * - * 1. BSP provided - * 2. CPU dependent (if provided) - * 3. generic (if no BSP and no CPU dependent) - */ - -#define CPU_PROVIDES_IDLE_THREAD_BODY TRUE - -/* - * Does the stack grow up (toward higher addresses) or down - * (toward lower addresses)? - * - * If TRUE, then the grows upward. - * If FALSE, then the grows toward smaller addresses. - */ - -#define CPU_STACK_GROWS_UP FALSE - -/* - * The following is the variable attribute used to force alignment - * of critical RTEMS structures. On some processors it may make - * sense to have these aligned on tighter boundaries than - * the minimum requirements of the compiler in order to have as - * much of the critical data area as possible in a cache line. - * - * The placement of this macro in the declaration of the variables - * is based on the syntactically requirements of the GNU C - * "__attribute__" extension. For example with GNU C, use - * the following to force a structures to a 32 byte boundary. - * - * __attribute__ ((aligned (32))) - * - * NOTE: Currently only the Priority Bit Map table uses this feature. - * To benefit from using this, the data must be heavily - * used so it will stay in the cache and used frequently enough - * in the executive to justify turning this on. - */ - -#define CPU_STRUCTURE_ALIGNMENT - -/* - * Define what is required to specify how the network to host conversion - * routines are handled. - * - */ - -#error "Check these definitions!!!" - -#define CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE -#define CPU_BIG_ENDIAN TRUE -#define CPU_LITTLE_ENDIAN FALSE - -/* - * The following defines the number of bits actually used in the - * interrupt field of the task mode. How those bits map to the - * CPU interrupt levels is defined by the routine _CPU_ISR_Set_level(). - */ - -#define CPU_MODES_INTERRUPT_MASK 0x00000001 - -/* - * Processor defined structures - * - * Examples structures include the descriptor tables from the i386 - * and the processor control structure on the i960ca. - */ - -/* may need to put some structures here. */ - -/* - * Contexts - * - * Generally there are 2 types of context to save. - * 1. Interrupt registers to save - * 2. Task level registers to save - * - * This means we have the following 3 context items: - * 1. task level context stuff:: Context_Control - * 2. floating point task stuff:: Context_Control_fp - * 3. special interrupt level context :: Context_Control_interrupt - * - * On some processors, it is cost-effective to save only the callee - * preserved registers during a task context switch. This means - * that the ISR code needs to save those registers which do not - * persist across function calls. It is not mandatory to make this - * distinctions between the caller/callee saves registers for the - * purpose of minimizing context saved during task switch and on interrupts. - * If the cost of saving extra registers is minimal, simplicity is the - * choice. Save the same context on interrupt entry as for tasks in - * this case. - * - * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then - * care should be used in designing the context area. - * - * On some CPUs with hardware floating point support, the Context_Control_fp - * structure will not be used or it simply consist of an array of a - * fixed number of bytes. This is done when the floating point context - * is dumped by a "FP save context" type instruction and the format - * is not really defined by the CPU. In this case, there is no need - * to figure out the exact format -- only the size. Of course, although - * this is enough information for RTEMS, it is probably not enough for - * a debugger such as gdb. But that is another problem. - */ - -typedef struct { - unsigned32 signal; - unsigned32 gr1; - unsigned32 rab; - unsigned32 PC0; - unsigned32 PC1; - unsigned32 PC2; - unsigned32 CHA; - unsigned32 CHD; - unsigned32 CHC; - unsigned32 ALU; - unsigned32 OPS; - unsigned32 tav; - unsigned32 lr1; - unsigned32 rfb; - unsigned32 msp; - - unsigned32 FPStat0; - unsigned32 FPStat1; - unsigned32 FPStat2; - unsigned32 IPA; - unsigned32 IPB; - unsigned32 IPC; - unsigned32 Q; - - unsigned32 gr96; - unsigned32 gr97; - unsigned32 gr98; - unsigned32 gr99; - unsigned32 gr100; - unsigned32 gr101; - unsigned32 gr102; - unsigned32 gr103; - unsigned32 gr104; - unsigned32 gr105; - unsigned32 gr106; - unsigned32 gr107; - unsigned32 gr108; - unsigned32 gr109; - unsigned32 gr110; - unsigned32 gr111; - - unsigned32 gr112; - unsigned32 gr113; - unsigned32 gr114; - unsigned32 gr115; - - unsigned32 gr116; - unsigned32 gr117; - unsigned32 gr118; - unsigned32 gr119; - unsigned32 gr120; - unsigned32 gr121; - unsigned32 gr122; - unsigned32 gr123; - unsigned32 gr124; - - unsigned32 local_count; - - unsigned32 locals[128]; -} Context_Control; - -typedef struct { - double some_float_register; -} Context_Control_fp; - -typedef struct { - unsigned32 special_interrupt_register; -} CPU_Interrupt_frame; - - -/* - * The following table contains the information required to configure - * the XXX processor specific parameters. - * - * NOTE: The interrupt_stack_size field is required if - * CPU_ALLOCATE_INTERRUPT_STACK is defined as TRUE. - * - * The pretasking_hook, predriver_hook, and postdriver_hook, - * and the do_zero_of_workspace fields are required on ALL CPUs. - */ - -typedef struct { - void (*pretasking_hook)( void ); - void (*predriver_hook)( void ); - void (*postdriver_hook)( void ); - void (*idle_task)( void ); - boolean do_zero_of_workspace; - unsigned32 idle_task_stack_size; - unsigned32 interrupt_stack_size; - unsigned32 extra_system_initialization_stack; - unsigned32 some_other_cpu_dependent_info; -} rtems_cpu_table; - -/* - * This variable is optional. It is used on CPUs on which it is difficult - * to generate an "uninitialized" FP context. It is filled in by - * _CPU_Initialize and copied into the task's FP context area during - * _CPU_Context_Initialize. - */ - -EXTERN Context_Control_fp _CPU_Null_fp_context; - -/* - * On some CPUs, RTEMS supports a software managed interrupt stack. - * This stack is allocated by the Interrupt Manager and the switch - * is performed in _ISR_Handler. These variables contain pointers - * to the lowest and highest addresses in the chunk of memory allocated - * for the interrupt stack. Since it is unknown whether the stack - * grows up or down (in general), this give the CPU dependent - * code the option of picking the version it wants to use. - * - * NOTE: These two variables are required if the macro - * CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE. - */ - -EXTERN void *_CPU_Interrupt_stack_low; -EXTERN void *_CPU_Interrupt_stack_high; - -/* - * With some compilation systems, it is difficult if not impossible to - * call a high-level language routine from assembly language. This - * is especially true of commercial Ada compilers and name mangling - * C++ ones. This variable can be optionally defined by the CPU porter - * and contains the address of the routine _Thread_Dispatch. This - * can make it easier to invoke that routine at the end of the interrupt - * sequence (if a dispatch is necessary). - */ - -EXTERN void (*_CPU_Thread_dispatch_pointer)(); - -/* - * Nothing prevents the porter from declaring more CPU specific variables. - */ - -/* XXX: if needed, put more variables here */ - -/* - * The size of the floating point context area. On some CPUs this - * will not be a "sizeof" because the format of the floating point - * area is not defined -- only the size is. This is usually on - * CPUs with a "floating point save context" instruction. - */ - -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) - -/* - * Amount of extra stack (above minimum stack size) required by - * system initialization thread. Remember that in a multiprocessor - * system the system intialization thread becomes the MP server thread. - */ - -#define CPU_SYSTEM_INITIALIZATION_THREAD_EXTRA_STACK 0 - -/* - * This defines the number of entries in the ISR_Vector_table managed - * by RTEMS. - */ - -#define CPU_INTERRUPT_NUMBER_OF_VECTORS 256 -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) - -/* - * Should be large enough to run all RTEMS tests. This insures - * that a "reasonable" small application should not have any problems. - */ - -#define CPU_STACK_MINIMUM_SIZE (8192) - -/* - * CPU's worst alignment requirement for data types on a byte boundary. This - * alignment does not take into account the requirements for the stack. - */ - -#define CPU_ALIGNMENT 4 - -/* - * This number corresponds to the byte alignment requirement for the - * heap handler. This alignment requirement may be stricter than that - * for the data types alignment specified by CPU_ALIGNMENT. It is - * common for the heap to follow the same alignment requirement as - * CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict enough for the heap, - * then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for memory - * buffers allocated by the partition manager. This alignment requirement - * may be stricter than that for the data types alignment specified by - * CPU_ALIGNMENT. It is common for the partition to follow the same - * alignment requirement as CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict - * enough for the partition, then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for the - * stack. This alignment requirement may be stricter than that for the - * data types alignment specified by CPU_ALIGNMENT. If the CPU_ALIGNMENT - * is strict enough for the stack, then this should be set to 0. - * - * NOTE: This must be a power of 2 either 0 or greater than CPU_ALIGNMENT. - */ - -#define CPU_STACK_ALIGNMENT 0 - -/* ISR handler macros */ - -/* - * Disable all interrupts for an RTEMS critical section. The previous - * level is returned in _level. - */ - -#define _CPU_ISR_Disable( _isr_cookie ) \ - do{ _isr_cookie = a29k_disable(); }while(0) - -/* - * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). - * This indicates the end of an RTEMS critical section. The parameter - * _level is not modified. - */ - -#define _CPU_ISR_Enable( _isr_cookie ) \ - do{ a29k_enable(_isr_cookie) ; }while(0) - -/* - * This temporarily restores the interrupt to _level before immediately - * disabling them again. This is used to divide long RTEMS critical - * sections into two or more parts. The parameter _level is not - * modified. - */ - -#define _CPU_ISR_Flash( _isr_cookie ) \ - do{ \ - _CPU_ISR_Enable( _isr_cookie ); \ - _CPU_ISR_Disable( _isr_cookie ); \ - }while(0) - -/* - * Map interrupt level in task mode onto the hardware that the CPU - * actually provides. Currently, interrupt levels which do not - * map onto the CPU in a generic fashion are undefined. Someday, - * it would be nice if these were "mapped" by the application - * via a callout. For example, m68k has 8 levels 0 - 7, levels - * 8 - 255 would be available for bsp/application specific meaning. - * This could be used to manage a programmable interrupt controller - * via the rtems_task_mode directive. - */ - -#define _CPU_ISR_Set_level( new_level ) \ - do{ \ - if ( new_level ) a29k_disable_all(); \ - else a29k_enable_all(); \ - }while(0); - -/* end of ISR handler macros */ - -/* Context handler macros */ - -extern void _CPU_Context_save( - Context_Control *new_context -); - -/* - * Initialize the context to a state suitable for starting a - * task after a context restore operation. Generally, this - * involves: - * - * - setting a starting address - * - preparing the stack - * - preparing the stack and frame pointers - * - setting the proper interrupt level in the context - * - initializing the floating point context - * - * This routine generally does not set any unnecessary register - * in the context. The state of the "general data" registers is - * undefined at task start time. - * - * NOTE: This is_fp parameter is TRUE if the thread is to be a floating - * point thread. This is typically only used on CPUs where the - * FPU may be easily disabled by software such as on the SPARC - * where the PSR contains an enable FPU bit. - */ - -#define _CPU_Context_Initialize( _the_context, _stack_base, _size, \ - _isr, _entry_point, _is_fp ) \ - do{ /* allocate 1/4 of stack for memory stack, 3/4 of stack for register stack */ \ - unsigned32 _mem_stack_tmp = (unsigned32)(_stack_base) + (_size); \ - unsigned32 _reg_stack_tmp = (unsigned32)(_stack_base) + (((_size)*3)/4); \ - _mem_stack_tmp &= ~(CPU_ALIGNMENT-1); \ - _reg_stack_tmp &= ~(CPU_ALIGNMENT-1); \ - _CPU_Context_save(_the_context); \ - (_the_context)->msp = _mem_stack_tmp; /* gr125 */ \ - (_the_context)->lr1 = \ - (_the_context)->locals[1] = \ - (_the_context)->rfb = _reg_stack_tmp; /* gr127 */ \ - (_the_context)->gr1 = _reg_stack_tmp - 4 * 4; \ - (_the_context)->rab = _reg_stack_tmp - 128 * 4; /* gr126 */ \ - (_the_context)->local_count = 1-1; \ - (_the_context)->PC1 = _entry_point; \ - (_the_context)->PC0 = (unsigned32)((char *)_entry_point + 4); \ - if (_isr) { (_the_context)->OPS |= (TD | DI); } \ - else \ - { (_the_context)->OPS &= ~(TD | DI); } \ - }while(0) - -/* - * This routine is responsible for somehow restarting the currently - * executing task. If you are lucky, then all that is necessary - * is restoring the context. Otherwise, there will need to be - * a special assembly routine which does something special in this - * case. Context_Restore should work most of the time. It will - * not work if restarting self conflicts with the stack frame - * assumptions of restoring a context. - */ - -#define _CPU_Context_Restart_self( _the_context ) \ - _CPU_Context_restore( (_the_context) ) - -/* - * The purpose of this macro is to allow the initial pointer into - * a floating point context area (used to save the floating point - * context) to be at an arbitrary place in the floating point - * context area. - * - * This is necessary because some FP units are designed to have - * their context saved as a stack which grows into lower addresses. - * Other FP units can be saved by simply moving registers into offsets - * from the base of the context area. Finally some FP units provide - * a "dump context" instruction which could fill in from high to low - * or low to high based on the whim of the CPU designers. - */ - -#define _CPU_Context_Fp_start( _base, _offset ) \ - ( (char *) (_base) + (_offset) ) - -/* - * This routine initializes the FP context area passed to it to. - * There are a few standard ways in which to initialize the - * floating point context. The code included for this macro assumes - * that this is a CPU in which a "initial" FP context was saved into - * _CPU_Null_fp_context and it simply copies it to the destination - * context passed to it. - * - * Other models include (1) not doing anything, and (2) putting - * a "null FP status word" in the correct place in the FP context. - */ - -#define _CPU_Context_Initialize_fp( _destination ) \ - do { \ - *((Context_Control_fp *) *((void **) _destination)) = _CPU_Null_fp_context; \ - } while(0) - -/* end of Context handler macros */ - -/* Fatal Error manager macros */ - -/* - * This routine copies _error into a known place -- typically a stack - * location or a register, optionally disables interrupts, and - * halts/stops the CPU. - */ - -#define _CPU_Fatal_halt( _error ) \ - a29k_fatal_error(_error) - -/* end of Fatal Error manager macros */ - -/* Bitfield handler macros */ - -/* - * This routine sets _output to the bit number of the first bit - * set in _value. _value is of CPU dependent type Priority_Bit_map_control. - * This type may be either 16 or 32 bits wide although only the 16 - * least significant bits will be used. - * - * There are a number of variables in using a "find first bit" type - * instruction. - * - * (1) What happens when run on a value of zero? - * (2) Bits may be numbered from MSB to LSB or vice-versa. - * (3) The numbering may be zero or one based. - * (4) The "find first bit" instruction may search from MSB or LSB. - * - * RTEMS guarantees that (1) will never happen so it is not a concern. - * (2),(3), (4) are handled by the macros _CPU_Priority_mask() and - * _CPU_Priority_bits_index(). These three form a set of routines - * which must logically operate together. Bits in the _value are - * set and cleared based on masks built by _CPU_Priority_mask(). - * The basic major and minor values calculated by _Priority_Major() - * and _Priority_Minor() are "massaged" by _CPU_Priority_bits_index() - * to properly range between the values returned by the "find first bit" - * instruction. This makes it possible for _Priority_Get_highest() to - * calculate the major and directly index into the minor table. - * This mapping is necessary to ensure that 0 (a high priority major/minor) - * is the first bit found. - * - * This entire "find first bit" and mapping process depends heavily - * on the manner in which a priority is broken into a major and minor - * components with the major being the 4 MSB of a priority and minor - * the 4 LSB. Thus (0 << 4) + 0 corresponds to priority 0 -- the highest - * priority. And (15 << 4) + 14 corresponds to priority 254 -- the next - * to the lowest priority. - * - * If your CPU does not have a "find first bit" instruction, then - * there are ways to make do without it. Here are a handful of ways - * to implement this in software: - * - * - a series of 16 bit test instructions - * - a "binary search using if's" - * - _number = 0 - * if _value > 0x00ff - * _value >>=8 - * _number = 8; - * - * if _value > 0x0000f - * _value >=8 - * _number += 4 - * - * _number += bit_set_table[ _value ] - * - * where bit_set_table[ 16 ] has values which indicate the first - * bit set - */ - -#define CPU_USE_GENERIC_BITFIELD_CODE TRUE -#define CPU_USE_GENERIC_BITFIELD_DATA TRUE - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - { \ - (_output) = 0; /* do something to prevent warnings */ \ - } - -#endif - -/* end of Bitfield handler macros */ - -/* - * This routine builds the mask which corresponds to the bit fields - * as searched by _CPU_Bitfield_Find_first_bit(). See the discussion - * for that routine. - */ - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Priority_Mask( _bit_number ) \ - ( 1 << (_bit_number) ) - -#endif - -/* - * This routine translates the bit numbers returned by - * _CPU_Bitfield_Find_first_bit() into something suitable for use as - * a major or minor component of a priority. See the discussion - * for that routine. - */ - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Priority_bits_index( _priority ) \ - (_priority) - -#endif - -/* end of Priority handler macros */ - -/* functions */ - -/* - * _CPU_Initialize - * - * This routine performs CPU dependent initialization. - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch)() -); - -/* - * _CPU_ISR_install_raw_handler - * - * This routine installs a "raw" interrupt handler directly into the - * processor's vector table. - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_ISR_install_vector - * - * This routine installs an interrupt vector. - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_Install_interrupt_stack - * - * This routine installs the hardware interrupt stack pointer. - * - * NOTE: It need only be provided if CPU_HAS_HARDWARE_INTERRUPT_STACK - * is TRUE. - */ - -void _CPU_Install_interrupt_stack( void ); - -/* - * _CPU_Internal_threads_Idle_thread_body - * - * This routine is the CPU dependent IDLE thread body. - * - * NOTE: It need only be provided if CPU_PROVIDES_IDLE_THREAD_BODY - * is TRUE. - */ - -void _CPU_Internal_threads_Idle_thread_body( void ); - -/* - * _CPU_Context_switch - * - * This routine switches from the run context to the heir context. - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/* - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner. It may simply be a label in _CPU_Context_switch. - * - * NOTE: May be unnecessary to reload some registers. - */ - -void _CPU_Context_restore( - Context_Control *new_context -); - -/* - * _CPU_Context_save_fp - * - * This routine saves the floating point context passed to it. - */ - -void _CPU_Context_save_fp( - void **fp_context_ptr -); - -/* - * _CPU_Context_restore_fp - * - * This routine restores the floating point context passed to it. - */ - -void _CPU_Context_restore_fp( - void **fp_context_ptr -); - -/* The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. - * - * This version will work on any processor, but if there is a better - * way for your CPU PLEASE use it. The most common way to do this is to: - * - * swap least significant two bytes with 16-bit rotate - * swap upper and lower 16-bits - * swap most significant two bytes with 16-bit rotate - * - * Some CPUs have special instructions which swap a 32-bit quantity in - * a single instruction (e.g. i486). It is probably best to avoid - * an "endian swapping control bit" in the CPU. One good reason is - * that interrupts would probably have to be disabled to insure that - * an interrupt does not try to access the same "chunk" with the wrong - * endian. Another good reason is that on some CPUs, the endian bit - * endianness for ALL fetches -- both code and data -- so the code - * will be fetched incorrectly. - */ - -#define CPU_swap_u32( value ) \ - ((value&0xff) << 24) | (((value >> 8)&0xff) << 16) | \ - (((value >> 16)&0xff) << 8) | ((value>>24)&0xff) - -#define CPU_swap_u16( value ) \ - (((value&0xff) << 8) | ((value >> 8)&0xff)) - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/c/src/exec/score/cpu/a29k/cpu_asm.h b/c/src/exec/score/cpu/a29k/cpu_asm.h deleted file mode 100644 index 65eaf29737..0000000000 --- a/c/src/exec/score/cpu/a29k/cpu_asm.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * cpu_asm.h - * - * Very loose template for an include file for the cpu_asm.? file - * if it is implemented as a ".S" file (preprocessed by cpp) instead - * of a ".s" file (preprocessed by gm4 or gasp). - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - * - */ -/* @(#)cpu_asm.h 06/08/96 1.2 */ - -#ifndef __CPU_ASM_h -#define __CPU_ASM_h - -/* pull in the generated offsets */ - -/* #include <rtems/score/offsets.h> */ - -/* - * Hardware General Registers - */ - -/* put something here */ - -/* - * Hardware Floating Point Registers - */ - -/* put something here */ - -/* - * Hardware Control Registers - */ - -/* put something here */ - -/* - * Calling Convention - */ - -/* put something here */ - -/* - * Temporary registers - */ - -/* put something here */ - -/* - * Floating Point Registers - SW Conventions - */ - -/* put something here */ - -/* - * Temporary floating point registers - */ - -/* put something here */ - -#endif - -/* end of file */ diff --git a/c/src/exec/score/cpu/a29k/cpu_asm.s b/c/src/exec/score/cpu/a29k/cpu_asm.s deleted file mode 100644 index a3ed2c59c3..0000000000 --- a/c/src/exec/score/cpu/a29k/cpu_asm.s +++ /dev/null @@ -1,491 +0,0 @@ -;/* cpu_asm.c ===> cpu_asm.S or cpu_asm.s -; * -; * Author: Craig Lebakken <craigl@transition.com> -; * -; * COPYRIGHT (c) 1996 by Transition Networks Inc. -; * -; * To anyone who acknowledges that this file is provided "AS IS" -; * without any express or implied warranty: -; * permission to use, copy, modify, and distribute this file -; * for any purpose is hereby granted without fee, provided that -; * the above copyright notice and this notice appears in all -; * copies, and that the name of Transition Networks not be used in -; * advertising or publicity pertaining to distribution of the -; * software without specific, written prior permission. -; * Transition Networks makes no representations about the suitability -; * of this software for any purpose. -; * -; * -; * This file contains the basic algorithms for all assembly code used -; * in an specific CPU port of RTEMS. These algorithms must be implemented -; * in assembly language -; * -; * NOTE: This is supposed to be a .S or .s file NOT a C file. -; * -; * COPYRIGHT (c) 1989-1998. -; * On-Line Applications Research Corporation (OAR). -; * Copyright assigned to U.S. Government, 1994. -; * -; * The license and distribution terms for this file may be -; * found in the file LICENSE in this distribution or at -; * http://www.OARcorp.com/rtems/license.html. -; * -; * $Id$ -; */ - -;/* -; * This is supposed to be an assembly file. This means that system.h -; * and cpu.h should not be included in a "real" cpu_asm file. An -; * implementation in assembly should include "cpu_asm.h> -; */ - -;#include <cpu_asm.h> - .include "register.ah" - .include "amd.ah" - .include "pswmacro.ah" -; .extern _bsp_exit -; -; push a register onto the struct - .macro spush, sp, reg - store 0, 0, reg, sp ; push register - add sp, sp, 4 ; adjust stack pointer - .endm -; push a register onto the struct - .macro spushsr, sp, reg, sr - mfsr reg, sr - store 0, 0, reg, sp ; push register - add sp, sp, 4 ; adjust stack pointer - .endm -; pop a register from the struct - .macro spop, reg, sp - load 0, 0, reg, sp - add sp,sp,4 - .endm -; pop a special register from the struct - .macro spopsr, sreg, reg, sp - load 0, 0, reg, sp - mtsr sreg, reg - add sp,sp,4 - .endm -; -;/* -; * _CPU_Context_save_fp_context -; * -; * This routine is responsible for saving the FP context -; * at *fp_context_ptr. If the point to load the FP context -; * from is changed then the pointer is modified by this routine. -; * -; * Sometimes a macro implementation of this is in cpu.h which dereferences -; * the ** and a similarly named routine in this file is passed something -; * like a (Context_Control_fp *). The general rule on making this decision -; * is to avoid writing assembly language. -; */ - -;#if 0 -;void _CPU_Context_save_fp( -; void **fp_context_ptr -;) -;{ -;} -;#endif - .global _CPU_Context_save_fp -_CPU_Context_save_fp: - jmpi lr0 - nop - -;/* -; * _CPU_Context_restore_fp_context -; * -; * This routine is responsible for restoring the FP context -; * at *fp_context_ptr. If the point to load the FP context -; * from is changed then the pointer is modified by this routine. -; * -; * Sometimes a macro implementation of this is in cpu.h which dereferences -; * the ** and a similarly named routine in this file is passed something -; * like a (Context_Control_fp *). The general rule on making this decision -; * is to avoid writing assembly language. -; */ - -;#if 0 -;void _CPU_Context_restore_fp( -; void **fp_context_ptr -;) -;{ -;} -;#endif - .global __CPU_Context_restore_fp -__CPU_Context_restore_fp: - jmpi lr0 - nop - -;/* _CPU_Context_switch -; * -; * This routine performs a normal non-FP context switch. -; */ -;#if 0 -;void _CPU_Context_switch( -; Context_Control *run, -; Context_Control *heir -;) -;{ -;} -;#endif - .global __CPU_Context_switch -__CPU_Context_switch: - asneq 106, gr1, gr1 ; syscall - jmpi lr0 ; - nop ; - - - - .global _a29k_context_switch_sup -_a29k_context_switch_sup: - add pcb,lr2,0 - add kt1,lr3,0 ;move heir pointer to safe location - constn it0,SIG_SYNC - spush pcb,it0 - spush pcb,gr1 - spush pcb,rab ;push rab - spushsr pcb,it0,pc0 ;push specials - spushsr pcb,it0,pc1 - add pcb,pcb,1*4 ;space pc2 - spushsr pcb,it0,CHA ;push CHA - spushsr pcb,it0,CHD ;push CHD - spushsr pcb,it0,CHC ;push CHC - add pcb,pcb,1*4 ;space for alu - spushsr pcb,it0,ops ;push OPS - mfsr kt0,cps ;current status - const it1,FZ ;FZ constant - andn it1,kt0,it1 ;clear FZ bit - mtsr cps,it1 ;cps without FZ - add pcb,pcb,1*4 ;space for tav - mtsrim chc,0 ;possible DERR -; - spush pcb,lr1 ;push R-stack - spush pcb,rfb ; support - spush pcb,msp ;push M-stack pnt. -; - add pcb,pcb,3*4 ;space for floating point -; spush pcb,FPStat0 ;floating point -; spush pcb,FPStat1 -; spush pcb,FPStat2 -; - add pcb,pcb,4*4 ;space for IPA..Q -; - mtsrim cr,29-1 - storem 0,0,gr96,pcb ;push gr96-124, optional - add pcb,pcb,29*4 ;space for gr96-124 -; - sub it0,rfb,gr1 ;get bytes in cache - srl it0,it0,2 ;adjust to words - sub it0,it0,1 - spush pcb,it0 - mtsr cr,it0 - storem 0,0,lr0,pcb ;save lr0-rfb -; -context_restore: - add pcb,kt1,0 ;pcb=heir - add pcb,pcb,4 ;space for signal num - spop gr1,pcb ;restore freeze registers - add gr1,gr1,0 ;alu op - add pcb,pcb,9*4 ;move past freeze registers - add pcb,pcb,1*4 ;space for tav - spop lr1,pcb - spop rfb,pcb - spop msp,pcb -; spop FPStat0,pcb -; spop FPStat1,pcb -; spop FPStat2,pcb - add pcb,pcb,3*4 ;space for floating point - add pcb,pcb,4*4 ;space for IPA..Q - mtsrim cr,29-1 - loadm 0,0,gr96,pcb ;pop gr96-gr124 - add pcb,pcb,29*4 ;space for gr96-124 - - spop it1,pcb ;pop locals count - mtsr cr,it1 - loadm 0,0,lr0,pcb ;load locals - - add pcb,kt1,0 ;pcb=heir - mtsr cps,kt0 ;cps with FZ - nop - add pcb,pcb,4 ;space for signal num - spop gr1,pcb ;restore freeze registers - add gr1,gr1,0 ;alu op - spop rab,pcb - spopsr pc0,it1,pcb - spopsr pc1,it1,pcb - add pcb,pcb,4 ;space for pc2 - spopsr CHA,it1,pcb - spopsr CHD,it1,pcb - spopsr CHC,it1,pcb - add pcb,pcb,4 ;space for alu - spopsr ops,it1,pcb - nop - iret - - -;/* -; * _CPU_Context_restore -; * -; * This routine is generally used only to restart self in an -; * efficient manner. It may simply be a label in _CPU_Context_switch. -; * -; * NOTE: May be unnecessary to reload some registers. -; */ -;#if 0 -;void _CPU_Context_restore( -; Context_Control *new_context -;) -;{ -;} -;#endif - - .global __CPU_Context_restore -__CPU_Context_restore: - asneq 107, gr1, gr1 ; syscall - jmpi lr0 ; - nop ; - - .global _a29k_context_restore_sup -_a29k_context_restore_sup: - add kt1,lr2,0 ;kt1 = restore context - mfsr kt0,cps ;current status - const it1,FZ ;FZ constant - andn it1,kt0,it1 ;clear FZ bit - mtsr cps,it1 ;cps without FZ - jmp context_restore - nop - - .global _a29k_context_save_sup -_a29k_context_save_sup: - add pcb,lr2,0 - constn it0,SIG_SYNC - spush pcb,it0 - spush pcb,gr1 - spush pcb,rab ;push rab - spushsr pcb,it0,pc0 ;push specials - spushsr pcb,it0,pc1 - add pcb,pcb,1*4 ;space pc2 - spushsr pcb,it0,CHA ;push CHA - spushsr pcb,it0,CHD ;push CHD - spushsr pcb,it0,CHC ;push CHC - add pcb,pcb,1*4 ;space for alu - spushsr pcb,it0,ops ;push OPS - mfsr it0,cps ;current status -SaveFZState it1,it2 - add pcb,pcb,1*4 ;space for tav - mtsrim chc,0 ;possible DERR -; - spush pcb,lr1 ;push R-stack - spush pcb,rfb ; support - spush pcb,msp ;push M-stack pnt. -; - spush pcb,FPStat0 ;floating point - spush pcb,FPStat1 - spush pcb,FPStat2 -; - add pcb,pcb,4*4 ;space for IPA..Q -; - mtsrim cr,29-1 - storem 0,0,gr96,pcb ;push gr96-124, optional - add pcb,pcb,29*4 ;space for gr96-124 -; - sub kt0,rfb,gr1 ;get bytes in cache - srl kt0,kt0,2 ;adjust to words - sub kt0,kt0,1 - spush pcb,kt0 ;push number of words - mtsr cr,kt0 - storem 0,0,lr0,pcb ;save lr0-rfb -; - mtsr cps,it0 ;cps with FZ -RestoreFZState it1,it2 - - nop - nop - nop -; - iret -; - - .global __CPU_Context_save -__CPU_Context_save: - asneq 108, gr1, gr1 ; syscall - jmpi lr0 ; - nop ; - - -;/* void __ISR_Handler() -; * -; * This routine provides the RTEMS interrupt management. -; * -; */ - -;#if 0 -;void _ISR_Handler() -;{ -; /* -; * This discussion ignores a lot of the ugly details in a real -; * implementation such as saving enough registers/state to be -; * able to do something real. Keep in mind that the goal is -; * to invoke a user's ISR handler which is written in C and -; * uses a certain set of registers. -; * -; * Also note that the exact order is to a large extent flexible. -; * Hardware will dictate a sequence for a certain subset of -; * _ISR_Handler while requirements for setting -; */ - -; /* -; * At entry to "common" _ISR_Handler, the vector number must be -; * available. On some CPUs the hardware puts either the vector -; * number or the offset into the vector table for this ISR in a -; * known place. If the hardware does not give us this information, -; * then the assembly portion of RTEMS for this port will contain -; * a set of distinct interrupt entry points which somehow place -; * the vector number in a known place (which is safe if another -; * interrupt nests this one) and branches to _ISR_Handler. -; * -; * save some or all context on stack -; * may need to save some special interrupt information for exit -; * -; * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) -; * if ( _ISR_Nest_level == 0 ) -; * switch to software interrupt stack -; * #endif -; * -; * _ISR_Nest_level++; -; * -; * _Thread_Dispatch_disable_level++; -; * -; * (*_ISR_Vector_table[ vector ])( vector ); -; * -; * --_ISR_Nest_level; -; * -; * if ( _ISR_Nest_level ) -; * goto the label "exit interrupt (simple case)" -; * -; * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) -; * restore stack -; * #endif -; * -; * if ( !_Context_Switch_necessary ) -; * goto the label "exit interrupt (simple case)" -; * -; * if ( !_ISR_Signals_to_thread_executing ) -; * goto the label "exit interrupt (simple case)" -; * -; * call _Thread_Dispatch() or prepare to return to _ISR_Dispatch -; * -; * prepare to get out of interrupt -; * return from interrupt (maybe to _ISR_Dispatch) -; * -; * LABEL "exit interrupt (simple case): -; * prepare to get out of interrupt -; * return from interrupt -; */ -;} -;#endif -; .global __ISR_Handler -;__ISR_Handler: -; jmpi lr0 -; nop - - .global _a29k_getops -_a29k_getops: - asneq 113, gr96, gr96 - jmpi lr0 - nop - - .global _a29k_getops_sup -_a29k_getops_sup: - mfsr gr96, ops ; caller wants ops - iret - nop - - .global _a29k_disable -_a29k_disable: - asneq 110, gr96, gr96 - jmpi lr0 - nop - - .global _a29k_disable_sup -_a29k_disable_sup: - mfsr kt0, ops - add gr96, kt0, 0 ; return ops to caller - const kt1, (DI | TD) - consth kt1, (DI | TD) - or kt1, kt0, kt1 - mtsr ops, kt1 - iret - nop - - .global _a29k_disable_all -_a29k_disable_all: - asneq 112, gr96, gr96 - jmpi lr0 - nop - - .global _a29k_disable_all_sup -_a29k_disable_all_sup: - mfsr kt0, ops - const kt1, (DI | TD) - consth kt1, (DI | TD) - or kt1, kt0, kt1 - mtsr ops, kt1 - iret - nop - - .global _a29k_enable_all -_a29k_enable_all: - asneq 111, gr96, gr96 - jmpi lr0 - nop - - .global _a29k_enable_all_sup -_a29k_enable_all_sup: - mfsr kt0, ops - const kt1, (DI | TD) - consth kt1, (DI | TD) - andn kt1, kt0, kt1 - mtsr ops, kt1 - iret - nop - - .global _a29k_enable -_a29k_enable: - asneq 109, gr96, gr96 - jmpi lr0 - nop - - .global _a29k_enable_sup -_a29k_enable_sup: - mfsr kt0, ops - const kt1, (DI | TD) - consth kt1, (DI | TD) - and kt3, lr2, kt1 - andn kt0, kt0, kt1 - or kt1, kt0, kt3 - mtsr ops, kt1 - iret - nop - - .global _a29k_halt -_a29k_halt: - halt - jmp _a29k_halt - nop - - .global _a29k_super_mode -_a29k_super_mode: - mfsr gr96, ops - or gr96, gr96, 0x10 - mtsr ops, gr96 - iret - nop - - .global _a29k_as70 -_a29k_as70: - asneq 70,gr96,gr96 - jmpi lr0 - nop diff --git a/c/src/exec/score/cpu/a29k/pswmacro.ah b/c/src/exec/score/cpu/a29k/pswmacro.ah deleted file mode 100644 index c21eee4f35..0000000000 --- a/c/src/exec/score/cpu/a29k/pswmacro.ah +++ /dev/null @@ -1,442 +0,0 @@ -; /* @(#)pswmacro.ah 1.1 96/05/23 08:56:58, TEI */ -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; macros: Do_install and init_TLB -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; /* $Id$ */ - -;* File information and includes. - - .file "macro.ah" - .ident "@(#)pswmacro.ah 1.1 96/05/23 08:56:58, TEI" - - - .macro CONST32, RegName, RegValue - const RegName, RegValue - consth RegName, RegValue - .endm - - .macro CONSTX, RegName, RegValue - .if (RegValue) <= 0x0000ffff - const RegName, RegValue - .else - const RegName, RegValue - consth RegName, RegValue - .endif - .endm - - .macro PRODEV, RegName - srl RegName, RegName, 24 - .endm - -; -;* MACRO TO INSTALL VECTOR TABLE ENTRIES -; - -;* Assumes vector table address in v0 - - .macro _setvec, trapnum, trapaddr - mfsr v0, vab ; - const v2, trapnum ; - sll v1, v2, 2 ; - add v1, v1, v0 ; v0 has location of vector tab - - const v2, trapaddr ; - consth v2, trapaddr ; - store 0, 0, v2, v1 ; - nop ; - .endm - - .macro syscall, name - const tav, HIF_@name ; - asneq V_SYSCALL, gr1, gr1 ; - nop ; - nop ; - .endm - - - -;* MACRO TO INSTALL VECTOR TABLE ENTRIES - - .macro Do_Install, V_Number, V_Address - const lr4, V_Address - consth lr4, V_Address - const lr3, V_Number * 4 - consth lr3, V_Number * 4 - call lr0, V_Install - nop - .endm - - .macro Do_InstallX, V_Number, V_Address - const lr4, V_Address - consth lr4, V_Address - const lr3, V_Number * 4 - consth lr3, V_Number * 4 - call lr0, V_InstallX - nop - .endm - - - -; push a register onto the stack - .macro pushreg, reg, sp - sub sp, sp, 4 ; adjust stack pointer - store 0, 0, reg, sp ; push register - .endm - - .macro push, sp, reg - sub sp, sp, 4 - store 0, 0, reg, sp - .endm - -; pop the register from stack - .macro popreg, reg, sp - load 0, 0, reg, sp ; pop register - add sp, sp, 4 ; adjust stack pointer - .endm - .macro pop, reg, sp - load 0, 0, reg, sp - add sp, sp, 4 - .endm - -; push a special register onto stack - .macro pushspcl, spcl, tmpreg, sp - sub sp, sp, 4 ; adjust stack pointer - mfsr tmpreg, spcl ; get spcl reg - store 0, 0, tmpreg, sp ; push onto stack - .endm - - .macro pushsr, sp, reg, sreg - mfsr reg, sreg - sub sp, sp, 4 - store 0, 0, reg, sp - .endm - -; pop a special register from stack - .macro popspcl, spcl, tmpreg, sp - load 0, 0, tmpreg, sp ; pop from stack - add sp, sp, 4 ; adjust stack pointer - mtsr spcl, tmpreg ; set spcl reg - .endm - - .macro popsr, sreg, reg, sp - load 0, 0, reg, sp - add sp, sp, 4 - mtsr sreg, reg - .endm - -; -; save freeze mode registers on memory stack. -; - - .macro SaveFZState, tmp1, tmp2 - - ; save freeze mode registers. - - pushspcl pc0, tmp1, msp - pushspcl pc1, tmp1, msp - pushspcl alu, tmp1, msp - - pushspcl cha, tmp1, msp - pushspcl chd, tmp1, msp - pushspcl chc, tmp1, msp - - pushspcl ops, tmp1, msp - - ; turn freeze off - - const tmp2, FZ - mfsr tmp1, cps - andn tmp1, tmp1, tmp2 - mtsr cps, tmp1 - .endm - -; restore freeze mode registers from memory stack. - - .macro RestoreFZState, tmp1, tmp2 - - ; turn freeze on - - const tmp2, (FZ|DI|DA) - mfsr tmp1, cps - or tmp1, tmp1, tmp2 - mtsr cps, tmp1 - - ; restore freeze mode registers. - - popspcl ops, tmp1, msp - popspcl chc, tmp1, msp - popspcl chd, tmp1, msp - popspcl cha, tmp1, msp - popspcl alu, tmp1, msp - popspcl pc1, tmp1, msp - popspcl pc0, tmp1, msp - .endm - -; -;* -; - .equ WS, 512 ; window size - .equ RALLOC, 4 * 4 ; stack alloc for C - .equ SIGCTX_UM_SIZE, 40 * 4 ; - .equ SIGCTX_RFB, (38) * 4 ; user mode saved - .equ SIGCTX_SM_SIZE, 12 * 4 ; - .equ SIGCTX_SIG, (11)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_GR1, (10)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_RAB, (9)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_PC0, (8)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_PC1, (7)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_PC2, (6)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_CHC, (3)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_OPS, (1)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_TAV, (0)*4 + SIGCTX_UM_SIZE ; - - .macro sup_sv - add it2, trapreg, 0 ; transfer signal # - sub msp, msp, 4 ; - store 0, 0, it2, msp ; save signal number - sub msp, msp, 4 ; push gr1 - - store 0, 0, gr1, msp ; - sub msp, msp, 4 ; push rab - store 0, 0, rab, msp ; - const it0, WS ; Window size - - sub rab, rfb, it0 ; set rab = rfb-512 - pushsr msp, it0, PC0 ; save program counter0 - pushsr msp, it0, PC1 ; save program counter1 - pushsr msp, it0, PC2 ; save program counter2 - - pushsr msp, it0, CHA ; save channel address - pushsr msp, it0, CHD ; save channel data - pushsr msp, it0, CHC ; save channel control - pushsr msp, it0, ALU ; save alu - - pushsr msp, it0, OPS ; save ops - sub msp, msp, 4 ; - store 0, 0, tav, msp ; push tav - mtsrim chc, 0 ; no loadm/storem - - mfsr it0, ops ; get ops value - const it1, (TD | DI) ; disable interrupts - consth it1, (TD | DI) ; disable interrupts - or it0, it0, it1 ; set bits - - mtsr ops, it0 ; set new ops - const it0, _sigcode ; signal handler - consth it0, _sigcode ; signal handler - mtsr pc1, it0 ; store pc1 - - add it1, it0, 4 ; next addr - mtsr pc0, it1 ; store pc1 location - iret ; return - nop ; ALIGN - .endm - - .macro sig_return - mfsr it0, cps ; get processor status - const it1, FZ|DA ; Freeze + traps disable - or it0, it0, it1 ; to set FZ+DA - mtsr cps, it0 ; in freeze mode - - load 0, 0, tav, msp ; restore tav - add msp, msp, 4 ; - - popsr OPS,it0, msp ; - popsr ALU,it0, msp ; - popsr CHC,it0, msp ; - popsr CHD,it0, msp ; - - popsr CHA,it0, msp ; - popsr PC2,it0, msp ; - popsr PC1,it0, msp ; - popsr PC0,it0, msp ; - - load 0, 0, rab, msp ; - add msp, msp, 4 ; - load 0, 0, it0, msp ; - add gr1, it0, 0 ; pop rsp - - add msp, msp, 8 ; discount signal # - iret - .endm - - .macro repair_R_stack - add v0, msp, SIGCTX_GR1 ; interrupted gr1 - load 0, 0, v2, v0 ; - add v0, msp, SIGCTX_RFB ; - load 0, 0, v3, v0 ; interupted rfb - - const v1, WS ; - sub v1, v3, v1 ; rfb-512 - cpltu v0, v2, v1 ; test gr1 < rfb-512 - jmpf v0, $1 ; - - add gr1, rab, 0 ; - add v2, v1, 0 ; set LB = rfb-512 -$1: -;* if gr1 < rfb-512 yes LB = rfb-512 signalled during spill -;* if no, LB=gr1 interrupted cache < 126 registers - cpleu v0, v2, rfb ; test LB<=rfb - jmpf v0, $2 ; - nop ; - add v2, rfb, 0 ; -$2: - cpeq v0, v3, rfb ; fill rfb->'rfb - jmpt v0, $3 ; if rfb==rfb' - const tav, (0x80<<2) ; prepare for fill - or tav, tav, v2 ; - - mtsr IPA, tav ; IPA=LA<<2 - sub tav, v3, gr98 ; cache fill LA->rfb - srl tav, tav, 2 ; convert to words - sub tav, tav, 1 ; - - mtsr cr, tav ; - loadm 0, 0, gr0, v2 ; fill from LA->rfb -$3: - add rfb, v3, 0 ; move rfb upto 'rfb - sub rab, v1, 0 ; assign rab to rfb-512 - - add v0, msp, SIGCTX_GR1 ; - load 0, 0, v2, v0 ; v0 = interrupted gr1 - add gr1, v2, 0 ; move gr1 upto 'gr1 - nop ; - .endm - - .macro repair_regs - mtsrim cr, 29 - 1 ; to restore locals - loadm 0, 0, v0, msp ; - add msp, msp, 29*4 ; - popsr Q, tav, msp ; - - popsr IPC, tav, msp ; - popsr IPB, tav, msp ; - popsr IPA, tav, msp ; - pop FPStat3, msp ; floating point regs - - pop FPStat2, msp ; floating point regs - pop FPStat1, msp ; floating point regs - pop FPStat0, msp ; floating point regs - - add msp, msp, 3*4 ; R-stack repaired - .endm - -; -;*HIF related... -; - - - - -; send the message in bufaddr to Montip. - .macro SendMessageToMontip, bufaddr - const lr2, bufaddr -$1: - call lr0, _msg_send - consth lr2, bufaddr - cpeq gr96, gr96, 0 - jmpf gr96, $1 - const lr2, bufaddr - .endm - -; build a HIF_CALL message in bufaddr to send to montip. - .macro BuildHIFCALLMsg, bufaddr, tmp1, tmp2 - const tmp1, bufaddr - consth tmp1, bufaddr - const tmp2, HIF_CALL_MSGCODE - store 0, 0, tmp2, tmp1 ; msg code - add tmp1, tmp1, 4 - const tmp2, HIF_CALL_MSGLEN - store 0, 0, tmp2, tmp1 ; msg len - add tmp1, tmp1, 4 - store 0, 0, gr121, tmp1 ; service number - add tmp1, tmp1, 4 - store 0, 0, lr2, tmp1 ; lr2 - add tmp1, tmp1, 4 - store 0, 0, lr3, tmp1 ; lr3 - add tmp1, tmp1, 4 - store 0, 0, lr4, tmp1 ; lr4 - .endm - -; -;* -;* All the funky AMD style macros go in here...simply for -;* compatility -; -; - .macro IMPORT, symbol - .extern symbol - .endm - - .macro GLOBAL, symbol - .global symbol - .endm - - .macro USESECT, name, type - .sect name, type - .use name - .endm - - .macro SECTION, name, type - .sect name, type - .endm - - .macro FUNC, fname, lineno - .global fname -fname: - .endm - - .macro ENDFUNC, fname, lineno - .endm - -;*************************************LONG - .macro LONG, varname -varname: - .block 4 - .endm - -;*************************************UNSIGNED LONG - .macro ULONG, varname -varname: - .block 4 - .endm - -;*************************************SHORT - .macro SHORT, varname -varname: - .block 2 - .endm - -;*************************************CHAR - .macro CHAR, varname -varname: - .block 1 - .endm - -;*************************************LONGARRAY - .macro LONGARRAY, name, count -name: - .block count*4 - .endm - -;*************************************SHORTARRAY - - .macro SHORTARRAY, name, count -name: - .block count*2 - .endm - -;*************************************CHARARRAY - - .macro CHARARRAY, name, count -name: - .block count - .endm - - -;*************************************VOID_FPTR - - .macro VOID_FPTR, name -name: - .block 4 - .endm diff --git a/c/src/exec/score/cpu/a29k/register.ah b/c/src/exec/score/cpu/a29k/register.ah deleted file mode 100644 index 35142b508f..0000000000 --- a/c/src/exec/score/cpu/a29k/register.ah +++ /dev/null @@ -1,214 +0,0 @@ -; /* @(#)register.ah 1.1 96/05/23 08:56:57, TEI */ -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; naming of various registers -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; /* $Id$ */ - -;* File information and includes. - - .file "register.ah" - .ident "@(#)register.ah 1.1 96/05/23 08:56:57, TEI\n" - -;* Register Stack pointer and frame pointer registers. - - .extern Rrsp, Rfp - - .reg regsp, %%Rrsp - .reg fp, %%Rfp - - - .extern RTrapReg - .extern Rtrapreg - - .reg TrapReg, %%RTrapReg - .reg trapreg, %%Rtrapreg - - -;* Operating system Interrupt handler registers (gr64-gr67) - - .extern ROSint0, ROSint1, ROSint2, ROSint3 - - .reg OSint0, %%ROSint0 - .reg OSint1, %%ROSint1 - .reg OSint2, %%ROSint2 - .reg OSint3, %%ROSint3 - - .reg it0, %%ROSint0 - .reg it1, %%ROSint1 - .reg it2, %%ROSint2 - .reg it3, %%ROSint3 - - - -;* Operating system temporary (or scratch) registers (gr68-gr79) - - .extern ROStmp0, ROStmp1, ROStmp2, ROStmp3 - .extern ROStmp4, ROStmp5, ROStmp6, ROStmp7 - .extern ROStmp8, ROStmp9, ROStmp10, ROStmp11 - - .reg OStmp0, %%ROStmp0 - .reg OStmp1, %%ROStmp1 - .reg OStmp2, %%ROStmp2 - .reg OStmp3, %%ROStmp3 - - .reg OStmp4, %%ROStmp4 - .reg OStmp5, %%ROStmp5 - .reg OStmp6, %%ROStmp6 - .reg OStmp7, %%ROStmp7 - - .reg OStmp8, %%ROStmp8 - .reg OStmp9, %%ROStmp9 - .reg OStmp10, %%ROStmp10 - .reg OStmp11, %%ROStmp11 - - - .reg kt0, %%ROStmp0 - .reg kt1, %%ROStmp1 - .reg kt2, %%ROStmp2 - .reg kt3, %%ROStmp3 - - .reg kt4, %%ROStmp4 - .reg kt5, %%ROStmp5 - .reg kt6, %%ROStmp6 - .reg kt7, %%ROStmp7 - - .reg kt8, %%ROStmp8 - .reg kt9, %%ROStmp9 - .reg kt10, %%ROStmp10 - .reg kt11, %%ROStmp11 - - - .reg TempReg0, %%ROSint0 - .reg TempReg1, %%ROSint1 - .reg TempReg2, %%ROSint2 - .reg TempReg3, %%ROSint3 - - .reg TempReg4, %%ROStmp0 - .reg TempReg5, %%ROStmp1 - .reg TempReg6, %%ROStmp2 - .reg TempReg7, %%ROStmp3 - - .reg TempReg8, %%ROStmp4 - .reg TempReg9, %%ROStmp5 - .reg TempReg10, %%ROStmp6 - .reg TempReg11, %%ROStmp7 - - .reg TempReg12, %%ROStmp8 - .reg TempReg13, %%ROStmp9 - .reg TempReg14, %%ROStmp10 - .reg TempReg15, %%ROStmp11 - - -;* Assigned static registers - - .extern RSpillAddrReg, RFillAddrReg, RSignalAddrReg - .extern Rpcb, Retc - .extern RTimerExt, RTimerUtil, RLEDReg, RERRReg - .extern Ret0, Ret1, Ret2, Ret3, Ret4, Ret5, Ret6, Ret7, Reta, Retb - .extern Retx, Rety, Retz - - - .reg SpillAddrReg, %%RSpillAddrReg - .reg FillAddrReg, %%RFillAddrReg - .reg SignalAddrReg, %%RSignalAddrReg - .reg pcb, %%Rpcb - - .reg etx, %%Retx - .reg ety, %%Rety - .reg etz, %%Retz - .reg eta, %%Reta - - .reg etb, %%Retb - .reg etc, %%Retc - .reg TimerExt, %%RTimerExt - .reg TimerUtil, %%RTimerUtil - - .reg LEDReg, %%RLEDReg - .reg ERRReg, %%RERRReg - - - .reg et0, %%Ret0 - .reg et1, %%Ret1 - .reg et2, %%Ret2 - .reg et3, %%Ret3 - - .reg et4, %%Ret4 - .reg et5, %%Ret5 - .reg et6, %%Ret6 - .reg et7, %%Ret7 - -; - .equ SCB1REG_NUM, 88 - .reg SCB1REG_PTR, %%Ret0 - -; The floating point trap handlers need a few static registers - - .extern RFPStat0, RFPStat1, RFPStat2, RFPStat3 - .extern Rheapptr, RHeapPtr, RArgvPtr - - .reg FPStat0, %%RFPStat0 - .reg FPStat1, %%RFPStat1 - .reg FPStat2, %%RFPStat2 - .reg FPStat3, %%RFPStat3 - - .reg heapptr, %%Rheapptr - .reg HeapPtr, %%RHeapPtr - .reg ArgvPtr, %%RArgvPtr - - .extern RXLINXReg, RVMBCReg, RUARTReg, RETHERReg - - .reg XLINXReg, %%RXLINXReg - .reg VMBCReg, %%RVMBCReg - .reg UARTReg, %%RUARTReg - .reg ETHERReg, %%RXLINXReg - -;* Compiler and programmer registers. (gr96-gr127) - - .extern Rv0, Rv1, Rv2, Rv3, Rv4, Rv5, Rv6, Rv7, Rv8, Rv9 - .extern Rv10, Rv11, Rv12, Rv13, Rv14, Rv15 - - .reg v0, %%Rv0 - .reg v1, %%Rv1 - .reg v2, %%Rv2 - .reg v3, %%Rv3 - - .reg v4, %%Rv4 - .reg v5, %%Rv5 - .reg v6, %%Rv6 - .reg v7, %%Rv7 - - .reg v8, %%Rv8 - .reg v9, %%Rv9 - .reg v10, %%Rv10 - .reg v11, %%Rv11 - - .reg v12, %%Rv12 - .reg v13, %%Rv13 - .reg v14, %%Rv14 - .reg v15, %%Rv15 - - .extern Rtv0, Rtv1, Rtv2, Rtv3, Rtv4 - - .reg tv0, %%Rtv0 - .reg tv1, %%Rtv1 - .reg tv2, %%Rtv2 - .reg tv3, %%Rtv3 - .reg tv4, %%Rtv4 - -; **************************************************************************** -; For uatrap -; register definitions -- since this trap handler must allow for -; nested traps and interrupts such as TLB miss, protection violation, -; or Data Access Exception, and these trap handlers use the shared -; Temp registers, we must maintain our own that are safe over user- -; mode loads and stores. The following must be assigned global -; registers which are not used in INTR[0-3], TRAP[0-1], TLB miss, -; TLB protection violation, or data exception trap handlers. - -; .reg cha_cpy, OStmp4 ; copy of CHA -; .reg chd_cpy, OStmp5 ; copy of CHD -; .reg chc_cpy, OStmp6 ; copy of CHC -; .reg LTemp0, OStmp7 ; local temp 0 -; .reg LTemp1, OStmp8 ; local temp 1 - -; **************************************************************************** diff --git a/c/src/exec/score/cpu/a29k/rtems.c b/c/src/exec/score/cpu/a29k/rtems.c deleted file mode 100644 index 35fef9ed1a..0000000000 --- a/c/src/exec/score/cpu/a29k/rtems.c +++ /dev/null @@ -1,48 +0,0 @@ -/* rtems.c ===> rtems.S or rtems.s - * - * This file contains the single entry point code for - * the XXX implementation of RTEMS. - * - * NOTE: This is supposed to be a .S or .s file NOT a C file. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ -#ifndef lint -static char _sccsid[] = "@(#)rtems.c 04/08/96 1.1\n"; -#endif - -/* - * This is supposed to be an assembly file. This means that system.h - * and cpu.h should not be included in a "real" rtems file. - */ - -#include <rtems/system.h> -#include <rtems/score/cpu.h> -/* #include "asm.h> */ - -/* - * RTEMS - * - * This routine jumps to the directive indicated in the - * CPU defined register. This routine is used when RTEMS is - * linked by itself and placed in ROM. This routine is the - * first address in the ROM space for RTEMS. The user "calls" - * this address with the directive arguments in the normal place. - * This routine then jumps indirectly to the correct directive - * preserving the arguments. The directive should not realize - * it has been "wrapped" in this way. The table "_Entry_points" - * is used to look up the directive. - */ - -void RTEMS() -{ -} - diff --git a/c/src/exec/score/cpu/a29k/sig.s b/c/src/exec/score/cpu/a29k/sig.s deleted file mode 100644 index 245570ffcb..0000000000 --- a/c/src/exec/score/cpu/a29k/sig.s +++ /dev/null @@ -1,197 +0,0 @@ -;/* -; * $Id$ -; */ - -; .include "register.ah" - .include "amd.ah" - .include "pswmacro.ah" - .comm WindowSize,4 - .text - .reg it0,gr64 - .reg it1,gr65 - .reg it2,gr66 - .reg it3,gr67 - .reg v0,gr96 - .reg v1,gr97 - .reg v2,gr98 - .reg v3,gr99 - .reg trapreg,it0 - .reg FPStat0,gr79 - .reg FPStat1,gr79 - .reg FPStat2,gr79 - .reg FPStat3,gr79 - - .global _intr14 -_intr14: - const it3,14 - sup_sv - jmp interrupt - nop - - .global _intr18 -_intr18: - const it3,18 - sup_sv - jmp interrupt - nop - - .global _intr19 -_intr19: - const it3,19 - sup_sv - jmp interrupt - nop - -interrupt: - push msp,it3 - push msp,gr1 - push msp,rab - const it0,512 - sub rab,rfb,it0 ;set rab = rfb-512 - pushsr msp,it0,pc0 - pushsr msp,it0,pc1 - pushsr msp,it0,pc2 - pushsr msp,it0,cha - pushsr msp,it0,chd - pushsr msp,it0,chc - pushsr msp,it0,alu - pushsr msp,it0,ops - push msp,tav -; -;now come off freeze, and go to user-mode code. -;ensure load/store does not restart -; - mtsrim chc,0 - - mfsr it0, cps - const it1, FZ - consth it1, FZ - andn it0, it0, it1 - const it1,(DI|TD) - consth it1,(DI|TD) - or it0,it1,it0 - mtsr cps, it0 -; fall through to _sigcode - - .extern _a29k_ISR_Handler - .global _sigcode -_sigcode: - - push msp, lr1 ; R stack support - push msp, rfb ; support - push msp, msp ; M stack support - -; push msp, FPStat0 ; Floating point 0 -; push msp, FPStat1 ; Floating point 1 -; push msp, FPStat2 ; Floating point 2 -; push msp, FPStat3 ; Floating point 3 - sub msp,msp,4*4 - - pushsr msp, tav, IPA ; save user mode special - pushsr msp, tav, IPB ; save user mode special - pushsr msp, tav, IPC ; save user mode special - pushsr msp, tav, Q ; save user mode special - - sub msp, msp, 29*4 ; gr96-gr124 - mtsrim cr, 29-1 ; - storem 0, 0, gr96, msp ; - - - const v0, WindowSize ; Window Size value - consth v0, WindowSize ; Window Size value - load 0, 0, v0, v0 ; load Window size - add v2, msp, SIGCTX_RAB ; intr RAB value - - load 0, 0, v2, v2 ; rab value - - sub v1, rfb, v2 ; - cpgeu v1, v1, v0 ; - jmpt v1, nfill ; jmp if spill - add v1, gr1, 8 ; - - cpgtu v1, v1, rfb ; longjump test - jmpt v1, nfill ; - nop ; - -ifill: - add v0, msp, SIGCTX_RAB+4 ; - push v0, rab ; - const v2, fill+4 ; - consth v2, fill+4 ; - - push v0, v2 ; resave PC0 - sub v2, v2, 4 ; - push v0, v2 ; resave PC1 - const v2, 0 ; - - sub v0, v0, 3*4 ; - push v0, v2 ; - -nfill: - cpgtu v0, gr1, rfb ; if gr1>rfb -> gr1=rfb - jmpt v0, lower ; - cpltu v0, gr1, rab ; - jmpt v0, raise ; gr1<rab then gr1=rab - nop ; - -sendsig: - sub gr1, gr1, RALLOC ; - asgeu V_SPILL, gr1, rab ; - add lr1, rfb, 0 ; - add v1, msp, SIGCTX_SIG ; - -cont: - add lr2,it3,0 ; signal # - call lr0, _a29k_ISR_Handler ; call the handler - nop - - nop ; WASTE - jmp _a29k_sigdfl ; return code - nop ; WASTE - nop ; ALIGN - -lower: - jmp sendsig ; - add gr1, rfb, 0 ; -raise: - jmp sendsig ; - add gr1, rab, 0 ; - - - .global _a29k_sigdfl_sup -_a29k_sigdfl_sup: - repair_R_stack ; - repair_regs ; - sig_return ; return - halt ; never executes - - - .global _sigret -_sigret: -;assume msp points to tav - mfsr it0,cps - const it1,FZ - or it1,it0,it1 - mtsr cps,it1 - nop - nop -_sigret1: - pop tav,msp - popsr ops,it0,msp - popsr alu,it0,msp - popsr chc,it0,msp - popsr chd,it0,msp - popsr cha,it0,msp - popsr pc2,it0,msp - popsr pc1,it0,msp - popsr pc0,it0,msp - pop rab,msp - pop it0,msp - add gr1,it0,0 - add msp,msp,4 ;discount signal - iret - -_a29k_sigdfl: - asneq SIGDFL,gr1,gr1 - jmpi lr0 - nop diff --git a/c/src/exec/score/cpu/hppa1.1/Makefile.in b/c/src/exec/score/cpu/hppa1.1/Makefile.in deleted file mode 100644 index 6409a374fa..0000000000 --- a/c/src/exec/score/cpu/hppa1.1/Makefile.in +++ /dev/null @@ -1,84 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - -RELS=$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -C_PIECES=cpu -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) - -H_FILES=$(srcdir)/cpu.h $(srcdir)/hppa.h $(srcdir)/cpu_asm.h \ - $(srcdir)/hppatypes.h - -# H_FILES that get installed externally -EXTERNAL_H_FILES = - -# Assembly source names, if any, go here -- minus the .s -S_PIECES=cpu_asm rtems -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) - -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS := -I$(ARCH) $(CPPFLAGS) -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(ARCH)/offsets.h: $(ARCH) cpu.h $(PROJECT_RELEASE)/bin/genoffsets - $(RM) $@ - $(PROJECT_RELEASE)/bin/genoffsets > $@ - $(CHMOD) -w $@ - -$(ARCH)/rtems-cpu.rel: $(OBJS) - $(make-rel) - -all: ${ARCH} install-headers preinstall $(RELS) - -preinstall: $(ARCH) $(SRCS) $(ARCH)/offsets.h - $(INSTALL) -m 444 $(ARCH)/offsets.h $(PROJECT_INCLUDE)/rtems/score - -install-headers: $(ARCH) $(PROJECT_INCLUDE)/rtems/score/targopts.h \ - ${PROJECT_RELEASE}/lib/bsp_specs - $(INSTALL) -m 444 ${H_FILES} $(PROJECT_INCLUDE)/rtems/score -# we will share the basic cpu file - $(INSTALL) -m 444 ${EXTERNAL_H_FILES} $(PROJECT_INCLUDE) - -$(PROJECT_INCLUDE)/rtems/score/targopts.h: $(ARCH)/targopts.h-tmp - $(INSTALL) -m 444 $(ARCH)/targopts.h-tmp $@ - -# $(ARCH)/targopts.h-tmp rule is in leaf.cfg - -${PROJECT_RELEASE}/lib/bsp_specs: $(ARCH)/bsp_specs.tmp - $(INSTALL) -m 444 $(ARCH)/bsp_specs.tmp $@ - -# $(ARCH)/bsp_specs.tmp rule is in leaf.cfg diff --git a/c/src/exec/score/cpu/hppa1.1/cpu.c b/c/src/exec/score/cpu/hppa1.1/cpu.c deleted file mode 100644 index 282e0e53b6..0000000000 --- a/c/src/exec/score/cpu/hppa1.1/cpu.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * HP PA-RISC Dependent Source - * - * COPYRIGHT (c) 1994 by Division Incorporated - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/score/isr.h> -void hppa_cpu_halt(unsigned32 the_error); - - -/*PAGE - * - * _CPU_ISR_install_raw_handler - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - /* - * This is unsupported. For HPPA this function is handled by BSP - */ - - _CPU_Fatal_halt( 0xdeaddead ); -} - - - -/* - * This is the default handler which is called if - * _CPU_ISR_install_vector() has not been called for the - * specified vector. It simply forwards onto the spurious - * handler defined in the cpu-table. - */ - -static ISR_Handler -hppa_interrupt_report_spurious(ISR_Vector_number vector, - void* rtems_isr_frame) /* HPPA extension */ -{ - - /* - * If the CPU table defines a spurious_handler, then - * call it. If the handler returns halt. - */ - if ( _CPU_Table.spurious_handler ) - _CPU_Table.spurious_handler(vector, rtems_isr_frame); - - hppa_cpu_halt(vector); -} - - -/*PAGE - * - * _CPU_ISR_Get_level - */ - -unsigned32 _CPU_ISR_Get_level(void) -{ - int level; - HPPA_ASM_SSM(0, level); /* change no bits; just get copy */ - if (level & HPPA_PSW_I) - return 0; - return 1; -} - -/*PAGE - * - * _CPU_ISR_install_vector - * - * This kernel routine installs the RTEMS handler for the - * specified vector. The handler is a C callable routine. - * - * Input parameters: - * vector - interrupt vector number - * old_handler - former ISR for this vector number - * new_handler - replacement ISR for this vector number - * - * Output parameters: NONE - * - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - *old_handler = _ISR_Vector_table[vector]; - - _ISR_Vector_table[vector] = new_handler; -} - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: - * cpu_table - CPU table to initialize - * thread_dispatch - address of disptaching routine - * - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) /* ignored on this CPU */ -) -{ - register unsigned8 *fp_context; - unsigned32 i; - proc_ptr old_handler; - - /* - * This is the default fp context for all tasks - * Set it up so that denormalized results go to zero. - */ - - fp_context = (unsigned8*) &_CPU_Null_fp_context; - for (i=0 ; i<sizeof(Context_Control_fp); i++) - *fp_context++ = 0; - *((unsigned32 *) &_CPU_Null_fp_context) = HPPA_FPSTATUS_D; - - /* - * Save r27 into _CPU_Default_gr27 so it will hopefully be the correct - * global data pointer for the entire system. - */ - - asm volatile( "stw %%r27,%0" : "=m" (_CPU_Default_gr27): ); - - /* - * Init the 2nd level interrupt handlers - */ - - for (i=0; i < CPU_INTERRUPT_NUMBER_OF_VECTORS; i++) - _CPU_ISR_install_vector(i, - hppa_interrupt_report_spurious, - &old_handler); - - _CPU_Table = *cpu_table; - -} - - -/* - * Halt the system. - * Called by the _CPU_Fatal_halt macro - * - * XXX - * Later on, this will allow us to return to the prom. - * For now, we just ignore 'type_of_halt' - * - * XXX - * NOTE: for gcc, this function must be at the bottom - * of the file, that is because if it is at the top - * of the file, gcc will inline it's calls. Since - * the function uses the HPPA_ASM_LABEL() macro, when - * gcc inlines it, you get two definitions of the same - * label name, which is an assembly error. - */ - - -void -hppa_cpu_halt(unsigned32 the_error) -{ - unsigned32 isrlevel; - - _CPU_ISR_Disable(isrlevel); - - /* - * XXXXX NOTE: This label is only needed that that when - * the simulator stops, it shows the label name specified - */ - HPPA_ASM_LABEL("_hppa_cpu_halt"); - HPPA_ASM_BREAK(0, 0); -} - diff --git a/c/src/exec/score/cpu/hppa1.1/cpu.h b/c/src/exec/score/cpu/hppa1.1/cpu.h deleted file mode 100644 index ea13c01a66..0000000000 --- a/c/src/exec/score/cpu/hppa1.1/cpu.h +++ /dev/null @@ -1,620 +0,0 @@ -/* cpu.h - * - * This include file contains information pertaining to the HP - * PA-RISC processor (Level 1.1). - * - * COPYRIGHT (c) 1994 by Division Incorporated - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * Note: - * This file is included by both C and assembler code ( -DASM ) - * - * $Id$ - */ - -#ifndef __CPU_h -#define __CPU_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/score/hppa.h> /* pick up machine definitions */ -#ifndef ASM -#include <rtems/score/hppatypes.h> -#endif - -/* conditional compilation parameters */ - -#define CPU_INLINE_ENABLE_DISPATCH FALSE -#define CPU_UNROLL_ENQUEUE_PRIORITY TRUE - -/* - * RTEMS manages an interrupt stack in software for the HPPA. - */ - -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK TRUE -#define CPU_HAS_HARDWARE_INTERRUPT_STACK FALSE -#define CPU_ALLOCATE_INTERRUPT_STACK TRUE - -/* - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? - */ - -#define CPU_ISR_PASSES_FRAME_POINTER 0 - -/* - * HPPA has hardware FP, it is assumed to exist by GCC so all tasks - * may implicitly use it (especially for integer multiplies). Because - * the FP context is technically part of the basic integer context - * on this CPU, we cannot use the deferred FP context switch algorithm. - */ - -#define CPU_HARDWARE_FP TRUE -#define CPU_ALL_TASKS_ARE_FP TRUE -#define CPU_IDLE_TASK_IS_FP FALSE -#define CPU_USE_DEFERRED_FP_SWITCH FALSE - -#define CPU_PROVIDES_IDLE_THREAD_BODY FALSE -#define CPU_STACK_GROWS_UP TRUE -#define CPU_STRUCTURE_ALIGNMENT __attribute__ ((__aligned__ (32))) - -/* - * Define what is required to specify how the network to host conversion - * routines are handled. - */ - -#define CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE -#define CPU_BIG_ENDIAN TRUE -#define CPU_LITTLE_ENDIAN FALSE - -/* constants */ - -#define CPU_MODES_INTERRUPT_LEVEL 0x00000001 /* interrupt level in mode */ -#define CPU_MODES_INTERRUPT_MASK 0x00000001 /* interrupt level in mode */ - -/* - * PSW contstants - */ - -#define CPU_PSW_BASE (HPPA_PSW_C | HPPA_PSW_Q | HPPA_PSW_P | HPPA_PSW_D) -#define CPU_PSW_INTERRUPTS_ON (CPU_PSW_BASE | HPPA_PSW_I) -#define CPU_PSW_INTERRUPTS_OFF (CPU_PSW_BASE) - -#define CPU_PSW_DEFAULT CPU_PSW_BASE - - -#ifndef ASM - -/* - * Contexts - * - * This means we have the following context items: - * 1. task level context stuff:: Context_Control - * 2. floating point task stuff:: Context_Control_fp - * - * The PA-RISC is very fast so the expense of saving an extra register - * or two is not of great concern at the present. So we are not making - * a distinction between what is saved during a task switch and what is - * saved at each interrupt. Plus saving the entire context should make - * it easier to make gdb aware of RTEMS tasks. - */ - -typedef struct { - unsigned32 flags; /* whatever */ - unsigned32 gr1; /* scratch -- caller saves */ - unsigned32 gr2; /* RP -- return pointer */ - unsigned32 gr3; /* scratch -- callee saves */ - unsigned32 gr4; /* scratch -- callee saves */ - unsigned32 gr5; /* scratch -- callee saves */ - unsigned32 gr6; /* scratch -- callee saves */ - unsigned32 gr7; /* scratch -- callee saves */ - unsigned32 gr8; /* scratch -- callee saves */ - unsigned32 gr9; /* scratch -- callee saves */ - unsigned32 gr10; /* scratch -- callee saves */ - unsigned32 gr11; /* scratch -- callee saves */ - unsigned32 gr12; /* scratch -- callee saves */ - unsigned32 gr13; /* scratch -- callee saves */ - unsigned32 gr14; /* scratch -- callee saves */ - unsigned32 gr15; /* scratch -- callee saves */ - unsigned32 gr16; /* scratch -- callee saves */ - unsigned32 gr17; /* scratch -- callee saves */ - unsigned32 gr18; /* scratch -- callee saves */ - unsigned32 gr19; /* scratch -- caller saves */ - unsigned32 gr20; /* scratch -- caller saves */ - unsigned32 gr21; /* scratch -- caller saves */ - unsigned32 gr22; /* scratch -- caller saves */ - unsigned32 gr23; /* argument 3 */ - unsigned32 gr24; /* argument 2 */ - unsigned32 gr25; /* argument 1 */ - unsigned32 gr26; /* argument 0 */ - unsigned32 gr27; /* DP -- global data pointer */ - unsigned32 gr28; /* return values -- caller saves */ - unsigned32 gr29; /* return values -- caller saves */ - unsigned32 sp; /* gr30 */ - unsigned32 gr31; - - /* Various control registers */ - - unsigned32 sar; /* cr11 */ - unsigned32 ipsw; /* cr22; full 32 bits of psw */ - unsigned32 iir; /* cr19; interrupt instruction register */ - unsigned32 ior; /* cr21; interrupt offset register */ - unsigned32 isr; /* cr20; interrupt space register (not used) */ - unsigned32 pcoqfront; /* cr18; front que offset */ - unsigned32 pcoqback; /* cr18; back que offset */ - unsigned32 pcsqfront; /* cr17; front que space (not used) */ - unsigned32 pcsqback; /* cr17; back que space (not used) */ - unsigned32 itimer; /* cr16; itimer value */ - -} Context_Control; - - -/* Must be double word aligned. - * This will be ok since our allocator returns 8 byte aligned chunks - */ - -typedef struct { - double fr0; /* status */ - double fr1; /* exception information */ - double fr2; /* exception information */ - double fr3; /* exception information */ - double fr4; /* argument */ - double fr5; /* argument */ - double fr6; /* argument */ - double fr7; /* argument */ - double fr8; /* scratch -- caller saves */ - double fr9; /* scratch -- caller saves */ - double fr10; /* scratch -- caller saves */ - double fr11; /* scratch -- caller saves */ - double fr12; /* callee saves -- (PA-RISC 1.1 CPUs) */ - double fr13; /* callee saves -- (PA-RISC 1.1 CPUs) */ - double fr14; /* callee saves -- (PA-RISC 1.1 CPUs) */ - double fr15; /* callee saves -- (PA-RISC 1.1 CPUs) */ - double fr16; /* callee saves -- (PA-RISC 1.1 CPUs) */ - double fr17; /* callee saves -- (PA-RISC 1.1 CPUs) */ - double fr18; /* callee saves -- (PA-RISC 1.1 CPUs) */ - double fr19; /* callee saves -- (PA-RISC 1.1 CPUs) */ - double fr20; /* callee saves -- (PA-RISC 1.1 CPUs) */ - double fr21; /* callee saves -- (PA-RISC 1.1 CPUs) */ - double fr22; /* caller saves -- (PA-RISC 1.1 CPUs) */ - double fr23; /* caller saves -- (PA-RISC 1.1 CPUs) */ - double fr24; /* caller saves -- (PA-RISC 1.1 CPUs) */ - double fr25; /* caller saves -- (PA-RISC 1.1 CPUs) */ - double fr26; /* caller saves -- (PA-RISC 1.1 CPUs) */ - double fr27; /* caller saves -- (PA-RISC 1.1 CPUs) */ - double fr28; /* caller saves -- (PA-RISC 1.1 CPUs) */ - double fr29; /* caller saves -- (PA-RISC 1.1 CPUs) */ - double fr30; /* caller saves -- (PA-RISC 1.1 CPUs) */ - double fr31; /* caller saves -- (PA-RISC 1.1 CPUs) */ -} Context_Control_fp; - -/* - * The following structure defines the set of information saved - * on the current stack by RTEMS upon receipt of each interrupt. - */ - -typedef struct { - Context_Control Integer; - Context_Control_fp Floating_Point; -} CPU_Interrupt_frame; - -/* - * Our interrupt handlers take a 2nd argument: - * a pointer to a CPU_Interrupt_frame - * So we use our own prototype instead of rtems_isr_entry - */ - -typedef void ( *hppa_rtems_isr_entry )( - unsigned32, - CPU_Interrupt_frame * - ); - -/* - * The following table contains the information required to configure - * the HPPA specific parameters. - */ - -typedef struct { - void (*pretasking_hook)( void ); - void (*predriver_hook)( void ); - void (*postdriver_hook)( void ); - void (*idle_task)( void ); - boolean do_zero_of_workspace; - unsigned32 idle_task_stack_size; - unsigned32 interrupt_stack_size; - unsigned32 extra_mpci_receive_server_stack; - void * (*stack_allocate_hook)( unsigned32 ); - void (*stack_free_hook)( void * ); - /* end of fields required on all CPUs */ - - hppa_rtems_isr_entry spurious_handler; - - unsigned32 itimer_clicks_per_microsecond; /* for use by Clock driver */ -} rtems_cpu_table; - -/* variables */ - -SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context; -SCORE_EXTERN unsigned32 _CPU_Default_gr27; -SCORE_EXTERN void *_CPU_Interrupt_stack_low; -SCORE_EXTERN void *_CPU_Interrupt_stack_high; - -#endif /* ! ASM */ - -/* - * context sizes - */ - -#ifndef ASM -#define CPU_CONTEXT_SIZE sizeof( Context_Control ) -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) -#endif - -/* - * size of a frame on the stack - */ - -#define CPU_FRAME_SIZE (16 * 4) - -/* - * (Optional) # of bytes for libmisc/stackchk to check - * If not specifed, then it defaults to something reasonable - * for most architectures. - */ - -#define CPU_STACK_CHECK_SIZE (CPU_FRAME_SIZE * 2) - -/* - * extra stack required by the MPCI receive server thread - */ - -#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0 - -/* - * HPPA has 32 traps, then 32 external interrupts - * Rtems (_ISR_Vector_Table) is aware ONLY of the first 32 - * The BSP is aware of the external interrupts and possibly more. - * - */ - -#define CPU_INTERRUPT_NUMBER_OF_VECTORS (HPPA_INTERNAL_TRAPS) -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) - -/* - * Don't be chintzy here; we don't want to debug these problems - * Some of the tests eat almost 4k. - * Plus, the HPPA always allocates chunks of 64 bytes for stack - * growth. - */ - -#define CPU_STACK_MINIMUM_SIZE (8 * 1024) - -/* - * HPPA double's must be on 8 byte boundary - */ - -#define CPU_ALIGNMENT 8 - -/* - * just follow the basic HPPA alignment for the heap and partition - */ - -#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT -#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT - -/* - * HPPA stack is best when 64 byte aligned. - */ - -#define CPU_STACK_ALIGNMENT 64 - -#ifndef ASM - -/* macros */ - -/* - * ISR handler macros - * - * These macros perform the following functions: - * + disable all maskable CPU interrupts - * + restore previous interrupt level (enable) - * + temporarily restore interrupts (flash) - * + set a particular level - */ - -/* Disable interrupts; returning previous psw bits in _isr_level */ -#define _CPU_ISR_Disable( _isr_level ) \ - do { \ - HPPA_ASM_RSM(HPPA_PSW_I, _isr_level); \ - if (_isr_level & HPPA_PSW_I) _isr_level = 0; \ - else _isr_level = 1; \ - } while(0) - -/* Enable interrupts to previous level from _CPU_ISR_Disable - * does not change 'level' */ -#define _CPU_ISR_Enable( _isr_level ) \ - { \ - register int _ignore; \ - if (_isr_level == 0) HPPA_ASM_SSM(HPPA_PSW_I, _ignore); \ - else HPPA_ASM_RSM(HPPA_PSW_I, _ignore); \ - } - -/* restore, then disable interrupts; does not change level */ -#define _CPU_ISR_Flash( _isr_level ) \ - { \ - if (_isr_level == 0) \ - { \ - register int _ignore; \ - HPPA_ASM_SSM(HPPA_PSW_I, _ignore); \ - HPPA_ASM_RSM(HPPA_PSW_I, _ignore); \ - } \ - } - -/* - * Interrupt task levels - * - * Future scheme proposal - * level will be an index into a array. - * Each entry of array will be the interrupt bits - * enabled for that level. There will be 32 bits of external - * interrupts (to be placed in EIEM) and some (optional) bsp - * specific bits - * - * For pixel flow this *may* mean something like: - * level 0: all interrupts enabled (external + rhino) - * level 1: rhino disabled - * level 2: all io interrupts disabled (timer still enabled) - * level 7: *ALL* disabled (timer disabled) - */ - -/* set interrupts on or off; does not return new level */ -#define _CPU_ISR_Set_level( new_level ) \ - { \ - volatile int ignore; \ - if ( new_level ) HPPA_ASM_RSM(HPPA_PSW_I, ignore); \ - else HPPA_ASM_SSM(HPPA_PSW_I, ignore); \ - } - -/* return current level */ -unsigned32 _CPU_ISR_Get_level( void ); - -/* end of ISR handler macros */ - -/* - * Context handler macros - * - * These macros perform the following functions: - * + initialize a context area - * + restart the current thread - * + calculate the initial pointer into a FP context area - * + initialize an FP context area - * - * HPPA port adds two macros which hide the "indirectness" of the - * pointer passed the save/restore FP context assembly routines. - */ - -#define _CPU_Context_Initialize( _the_context, _stack_base, _size, \ - _new_level, _entry_point, _is_fp ) \ - do { \ - unsigned32 _stack; \ - \ - (_the_context)->flags = 0xfeedf00d; \ - (_the_context)->pcoqfront = (unsigned32)(_entry_point); \ - (_the_context)->pcoqback = (unsigned32)(_entry_point) + 4; \ - (_the_context)->pcsqfront = 0; \ - (_the_context)->pcsqback = 0; \ - if ( (_new_level) ) \ - (_the_context)->ipsw = CPU_PSW_INTERRUPTS_OFF; \ - else \ - (_the_context)->ipsw = CPU_PSW_INTERRUPTS_ON; \ - \ - _stack = ((unsigned32)(_stack_base) + (CPU_STACK_ALIGNMENT - 1)); \ - _stack &= ~(CPU_STACK_ALIGNMENT - 1); \ - if ((_stack - (unsigned32) (_stack_base)) < CPU_FRAME_SIZE) \ - _stack += CPU_FRAME_SIZE; \ - \ - (_the_context)->sp = (_stack); \ - (_the_context)->gr27 = _CPU_Default_gr27; \ - } while (0) - -#define _CPU_Context_Restart_self( _the_context ) \ - do { \ - _CPU_Context_restore( (_the_context) ); \ - } while (0) - -#define _CPU_Context_Fp_start( _base, _offset ) \ - ( (void *) _Addresses_Add_offset( (_base), (_offset) ) ) - -#define _CPU_Context_Initialize_fp( _destination ) \ - do { \ - *((Context_Control_fp *) *((void **) _destination)) = _CPU_Null_fp_context;\ - } while(0) - -#define _CPU_Context_save_fp( _fp_context ) \ - _CPU_Save_float_context( *(Context_Control_fp **)(_fp_context) ) - -#define _CPU_Context_restore_fp( _fp_context ) \ - _CPU_Restore_float_context( *(Context_Control_fp **)(_fp_context) ) - -/* end of Context handler macros */ - -/* - * Fatal Error manager macros - * - * These macros perform the following functions: - * + disable interrupts and halt the CPU - */ - -void hppa_cpu_halt(unsigned32 the_error); -#define _CPU_Fatal_halt( _error ) \ - hppa_cpu_halt(_error) - -/* end of Fatal Error manager macros */ - -/* - * Bitfield handler macros - * - * These macros perform the following functions: - * + scan for the highest numbered (MSB) set in a 16 bit bitfield - * - * NOTE: - * - * The HPPA does not have a scan instruction. This functionality - * is implemented in software. - */ - -#define CPU_USE_GENERIC_BITFIELD_CODE FALSE -#define CPU_USE_GENERIC_BITFIELD_DATA FALSE - -int hppa_rtems_ffs(unsigned int value); -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - _output = hppa_rtems_ffs(_value) - -/* end of Bitfield handler macros */ - -/* - * Priority handler macros - * - * These macros perform the following functions: - * + return a mask with the bit for this major/minor portion of - * of thread priority set. - * + translate the bit number returned by "Bitfield_find_first_bit" - * into an index into the thread ready chain bit maps - * - * Note: 255 is the lowest priority - */ - -#define _CPU_Priority_Mask( _bit_number ) \ - ( 1 << (_bit_number) ) - -#define _CPU_Priority_bits_index( _priority ) \ - (_priority) - -/* end of Priority handler macros */ - -/* functions */ - -/* - * _CPU_Initialize - * - * This routine performs CPU dependent initialization. - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) -); - -/* - * _CPU_ISR_install_raw_handler - * - * This routine installs a "raw" interrupt handler directly into the - * processor's vector table. - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_ISR_install_vector - * - * This routine installs an interrupt vector. - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_Context_switch - * - * This routine switches from the run context to the heir context. - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/* - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner and avoid stack conflicts. - */ - -void _CPU_Context_restore( - Context_Control *new_context -); - -/* - * _CPU_Save_float_context - * - * This routine saves the floating point context passed to it. - * - * NOTE: _CPU_Context_save_fp is implemented as a macro on the HPPA - * which dereferences the pointer before calling this. - */ - -void _CPU_Save_float_context( - Context_Control_fp *fp_context -); - -/* - * _CPU_Restore_float_context - * - * This routine restores the floating point context passed to it. - * - * NOTE: _CPU_Context_save_fp is implemented as a macro on the HPPA - * which dereferences the pointer before calling this. - */ - -void _CPU_Restore_float_context( - Context_Control_fp *fp_context -); - - -/* - * The raw interrupt handler for external interrupts - */ - -extern void _Generic_ISR_Handler( - void -); - - -/* The following routine swaps the endian format of an unsigned int. - * It must be static so it can be referenced indirectly. - */ - -static inline unsigned int -CPU_swap_u32(unsigned32 value) -{ - unsigned32 swapped; - - HPPA_ASM_SWAPBYTES(value, swapped); - - return( swapped ); -} - -#define CPU_swap_u16( value ) \ - (((value&0xff) << 8) | ((value >> 8)&0xff)) - -#endif /* ! ASM */ - -#ifdef __cplusplus -} -#endif - -#endif /* ! __CPU_h */ diff --git a/c/src/exec/score/cpu/hppa1.1/cpu_asm.h b/c/src/exec/score/cpu/hppa1.1/cpu_asm.h deleted file mode 100644 index 951f80dcf0..0000000000 --- a/c/src/exec/score/cpu/hppa1.1/cpu_asm.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright (c) 1990,1991 The University of Utah and - * the Center for Software Science (CSS). All rights reserved. - * - * Permission to use, copy, modify and distribute this software is hereby - * granted provided that (1) source code retains these copyright, permission, - * and disclaimer notices, and (2) redistributions including binaries - * reproduce the notices in supporting documentation, and (3) all advertising - * materials mentioning features or use of this software display the following - * acknowledgement: ``This product includes software developed by the Center - * for Software Science at the University of Utah.'' - * - * THE UNIVERSITY OF UTAH AND CSS ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS - * IS" CONDITION. THE UNIVERSITY OF UTAH AND CSS DISCLAIM ANY LIABILITY OF - * ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * CSS requests users of this software to return to css-dist@cs.utah.edu any - * improvements that they make and grant CSS redistribution rights. - * - * Utah $Hdr: asm.h 1.6 91/12/03$ - * - * $Id$ - */ - -/* - * Hardware Space Registers - */ -sr0 .reg %sr0 -sr1 .reg %sr1 -sr2 .reg %sr2 -sr3 .reg %sr3 -sr4 .reg %sr4 -sr5 .reg %sr5 -sr6 .reg %sr6 -sr7 .reg %sr7 - -/* - * Control register aliases - */ - -rctr .reg %cr0 -pidr1 .reg %cr8 -pidr2 .reg %cr9 -ccr .reg %cr10 -sar .reg %cr11 -pidr3 .reg %cr12 -pidr4 .reg %cr13 -iva .reg %cr14 -eiem .reg %cr15 -itmr .reg %cr16 -pcsq .reg %cr17 -pcoq .reg %cr18 -iir .reg %cr19 -isr .reg %cr20 -ior .reg %cr21 -ipsw .reg %cr22 -eirr .reg %cr23 - -/* - * Calling Convention - */ -rp .reg %r2 -arg3 .reg %r23 -arg2 .reg %r24 -arg1 .reg %r25 -arg0 .reg %r26 -dp .reg %r27 -ret0 .reg %r28 -ret1 .reg %r29 -sl .reg %r29 -sp .reg %r30 - - diff --git a/c/src/exec/score/cpu/hppa1.1/cpu_asm.s b/c/src/exec/score/cpu/hppa1.1/cpu_asm.s deleted file mode 100644 index e6d9fd08d8..0000000000 --- a/c/src/exec/score/cpu/hppa1.1/cpu_asm.s +++ /dev/null @@ -1,778 +0,0 @@ -/* - * TODO: - * Context_switch needs to only save callee save registers - * I think this means can skip: r1, r2, r19-29, r31 - * Ref: p 3-2 of Procedure Calling Conventions Manual - * This should be #ifndef DEBUG so that debugger has - * accurate visibility into all registers - * - * This file contains the assembly code for the HPPA implementation - * of RTEMS. - * - * COPYRIGHT (c) 1994,95 by Division Incorporated - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <rtems/score/hppa.h> -#include <rtems/score/cpu_asm.h> -#include <rtems/score/cpu.h> -#include <rtems/score/offsets.h> - - .SPACE $PRIVATE$ - .SUBSPA $DATA$,QUAD=1,ALIGN=8,ACCESS=31 - .SUBSPA $BSS$,QUAD=1,ALIGN=8,ACCESS=31,ZERO,SORT=82 - .SPACE $TEXT$ - .SUBSPA $LIT$,QUAD=0,ALIGN=8,ACCESS=44 - .SUBSPA $CODE$,QUAD=0,ALIGN=8,ACCESS=44,CODE_ONLY - .SPACE $TEXT$ - .SUBSPA $CODE$ - -/* - * Special register usage for context switch and interrupts - * Stay away from %cr28 which is used for TLB misses on 72000 - */ - -isr_arg0 .reg %cr24 -isr_r9 .reg %cr25 -isr_r8 .reg %cr26 - -/* - * Interrupt stack frame looks like this - * - * offset item - * ----------------------------------------------------------------- - * INTEGER_CONTEXT_OFFSET Context_Control - * FP_CONTEXT_OFFSET Context_Control_fp - * - * It is padded out to a multiple of 64 - */ - - -/*PAGE^L - * void _Generic_ISR_Handler() - * - * This routine provides the RTEMS interrupt management. - * - * We jump here from the interrupt vector. - * The HPPA hardware has done some stuff for us: - * PSW saved in IPSW - * PSW set to 0 - * PSW[E] set to default (0) - * PSW[M] set to 1 iff this is HPMC - * - * IIA queue is frozen (since PSW[Q] is now 0) - * privilege level promoted to 0 - * IIR, ISR, IOR potentially updated if PSW[Q] was 1 at trap - * registers GR 1,8,9,16,17,24,25 copied to shadow regs - * SHR 0 1 2 3 4 5 6 - * - * Our vector stub (in the BSP) MUST have done the following: - * - * a) Saved the original %r9 into %isr_r9 (%cr25) - * b) Placed the vector number in %r9 - * c) Was allowed to also destroy $isr_r8 (%cr26), - * but the stub was NOT allowed to destroy any other registers. - * - * The typical stub sequence (in the BSP) should look like this: - * - * a) mtctl %r9,isr_r9 ; (save r9 in cr25) - * b) ldi vector,%r9 ; (load constant vector number in r9) - * c) mtctl %r8,isr_r8 ; (save r8 in cr26) - * d) ldil L%MY_BSP_first_level_interrupt_handler,%r8 - * e) ldo R%MY_BSP_first_level_interrupt_handler(%r8),%r8 - * ; (point to BSP raw handler table) - * f) ldwx,s %r9(%r8),%r8 ; (load value from raw handler table) - * g) bv 0(%r8) ; (call raw handler: _Generic_ISR_Handler) - * h) mfctl isr_r8,%r8 ; (restore r8 from cr26 in delay slot) - * - * Optionally, steps (c) thru (h) _could_ be replaced with a single - * bl,n _Generic_ISR_Handler,%r0 - * - * - */ - .EXPORT _Generic_ISR_Handler,ENTRY,PRIV_LEV=0 -_Generic_ISR_Handler: - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - - mtctl arg0, isr_arg0 - -/* - * save interrupt state - */ - mfctl ipsw, arg0 - stw arg0, IPSW_OFFSET(sp) - - mfctl iir, arg0 - stw arg0, IIR_OFFSET(sp) - - mfctl ior, arg0 - stw arg0, IOR_OFFSET(sp) - - mfctl pcoq, arg0 - stw arg0, PCOQFRONT_OFFSET(sp) - - mtctl %r0, pcoq - mfctl pcoq, arg0 - stw arg0, PCOQBACK_OFFSET(sp) - - mfctl %sar, arg0 - stw arg0, SAR_OFFSET(sp) - -/* - * Build an interrupt frame to hold the contexts we will need. - * We have already saved the interrupt items on the stack - * - * At this point the following registers are damaged wrt the interrupt - * reg current value saved value - * ------------------------------------------------ - * arg0 scratch isr_arg0 (cr24) - * r9 vector number isr_r9 (cr25) - * - * Point to beginning of integer context and - * save the integer context - */ - stw %r1,R1_OFFSET(sp) - stw %r2,R2_OFFSET(sp) - stw %r3,R3_OFFSET(sp) - stw %r4,R4_OFFSET(sp) - stw %r5,R5_OFFSET(sp) - stw %r6,R6_OFFSET(sp) - stw %r7,R7_OFFSET(sp) - stw %r8,R8_OFFSET(sp) -/* - * skip r9 - */ - stw %r10,R10_OFFSET(sp) - stw %r11,R11_OFFSET(sp) - stw %r12,R12_OFFSET(sp) - stw %r13,R13_OFFSET(sp) - stw %r14,R14_OFFSET(sp) - stw %r15,R15_OFFSET(sp) - stw %r16,R16_OFFSET(sp) - stw %r17,R17_OFFSET(sp) - stw %r18,R18_OFFSET(sp) - stw %r19,R19_OFFSET(sp) - stw %r20,R20_OFFSET(sp) - stw %r21,R21_OFFSET(sp) - stw %r22,R22_OFFSET(sp) - stw %r23,R23_OFFSET(sp) - stw %r24,R24_OFFSET(sp) - stw %r25,R25_OFFSET(sp) -/* - * skip arg0 - */ - stw %r27,R27_OFFSET(sp) - stw %r28,R28_OFFSET(sp) - stw %r29,R29_OFFSET(sp) - stw %r30,R30_OFFSET(sp) - stw %r31,R31_OFFSET(sp) - -/* Now most registers are available since they have been saved - * - * The following items are currently wrong in the integer context - * reg current value saved value - * ------------------------------------------------ - * arg0 scratch isr_arg0 (cr24) - * r9 vector number isr_r9 (cr25) - * - * Fix them - */ - - mfctl isr_arg0,%r3 - stw %r3,ARG0_OFFSET(sp) - - mfctl isr_r9,%r3 - stw %r3,R9_OFFSET(sp) - -/* - * At this point we are done with isr_arg0, and isr_r9 control registers - * - * Prepare to re-enter virtual mode - * We need Q in case the interrupt handler enables interrupts - */ - - ldil L%CPU_PSW_DEFAULT, arg0 - ldo R%CPU_PSW_DEFAULT(arg0), arg0 - mtctl arg0, ipsw - -/* - * Now jump to "rest_of_isr_handler" with the rfi - * We are assuming the space queues are all correct already - */ - - ldil L%rest_of_isr_handler, arg0 - ldo R%rest_of_isr_handler(arg0), arg0 - mtctl arg0, pcoq - ldo 4(arg0), arg0 - mtctl arg0, pcoq - - rfi - nop - -/* - * At this point we are back in virtual mode and all our - * normal addressing is once again ok. - * - * It is now ok to take an exception or trap - */ - -rest_of_isr_handler: - -/* - * Point to beginning of float context and - * save the floating point context -- doing whatever patches are necessary - */ - - .call ARGW0=GR - bl _CPU_Save_float_context,%r2 - ldo FP_CONTEXT_OFFSET(sp),arg0 - -/* - * save the ptr to interrupt frame as an argument for the interrupt handler - */ - - copy sp, arg1 - -/* - * Advance the frame to point beyond all interrupt contexts (integer & float) - * this also includes the pad to align to 64byte stack boundary - */ - ldo CPU_INTERRUPT_FRAME_SIZE(sp), sp - -/* - * r3 -- &_ISR_Nest_level - * r5 -- value _ISR_Nest_level - * r4 -- &_Thread_Dispatch_disable_level - * r6 -- value _Thread_Dispatch_disable_level - * r9 -- vector number - */ - - .import _ISR_Nest_level,data - ldil L%_ISR_Nest_level,%r3 - ldo R%_ISR_Nest_level(%r3),%r3 - ldw 0(%r3),%r5 - - .import _Thread_Dispatch_disable_level,data - ldil L%_Thread_Dispatch_disable_level,%r4 - ldo R%_Thread_Dispatch_disable_level(%r4),%r4 - ldw 0(%r4),%r6 - -/* - * increment interrupt nest level counter. If outermost interrupt - * switch the stack and squirrel away the previous sp. - */ - addi 1,%r5,%r5 - stw %r5, 0(%r3) - -/* - * compute and save new stack (with frame) - * just in case we are nested -- simpler this way - */ - comibf,= 1,%r5,stack_done - ldo 128(sp),%r7 - -/* - * Switch to interrupt stack allocated by the interrupt manager (intr.c) - */ - .import _CPU_Interrupt_stack_low,data - ldil L%_CPU_Interrupt_stack_low,%r7 - ldw R%_CPU_Interrupt_stack_low(%r7),%r7 - ldo 128(%r7),%r7 - -stack_done: -/* - * save our current stack pointer where the "old sp" is supposed to be - */ - stw sp, -4(%r7) -/* - * and switch stacks (or advance old stack in nested case) - */ - copy %r7, sp - -/* - * increment the dispatch disable level counter. - */ - addi 1,%r6,%r6 - stw %r6, 0(%r4) - -/* - * load address of user handler - * Note: No error checking is done, it is assumed that the - * vector table contains a valid address or a stub - * spurious handler. - */ - .import _ISR_Vector_table,data - ldil L%_ISR_Vector_table,%r8 - ldo R%_ISR_Vector_table(%r8),%r8 - ldwx,s %r9(%r8),%r8 - -/* - * invoke user interrupt handler - * Interrupts are currently disabled, as per RTEMS convention - * The handler has the option of re-enabling interrupts - * NOTE: can not use 'bl' since it uses "pc-relative" addressing - * and we are using a hard coded address from a table - * So... we fudge r2 ourselves (ala dynacall) - * arg0 = vector number, arg1 = ptr to rtems_interrupt_frame - */ - copy %r9, %r26 - .call ARGW0=GR, ARGW1=GR - blr %r0, rp - bv,n 0(%r8) - -post_user_interrupt_handler: - -/* - * Back from user handler(s) - * Disable external interrupts (since the interrupt handler could - * have turned them on) and return to the interrupted task stack (assuming - * (_ISR_Nest_level == 0) - */ - - rsm HPPA_PSW_I + HPPA_PSW_R, %r0 - ldw -4(sp), sp - -/* - * r3 -- (most of) &_ISR_Nest_level - * r5 -- value _ISR_Nest_level - * r4 -- (most of) &_Thread_Dispatch_disable_level - * r6 -- value _Thread_Dispatch_disable_level - * r7 -- (most of) &_ISR_Signals_to_thread_executing - * r8 -- value _ISR_Signals_to_thread_executing - */ - - .import _ISR_Nest_level,data - ldil L%_ISR_Nest_level,%r3 - ldw R%_ISR_Nest_level(%r3),%r5 - - .import _Thread_Dispatch_disable_level,data - ldil L%_Thread_Dispatch_disable_level,%r4 - ldw R%_Thread_Dispatch_disable_level(%r4),%r6 - - .import _ISR_Signals_to_thread_executing,data - ldil L%_ISR_Signals_to_thread_executing,%r7 - -/* - * decrement isr nest level - */ - addi -1, %r5, %r5 - stw %r5, R%_ISR_Nest_level(%r3) - -/* - * decrement dispatch disable level counter and, if not 0, go on - */ - addi -1,%r6,%r6 - comibf,= 0,%r6,isr_restore - stw %r6, R%_Thread_Dispatch_disable_level(%r4) - -/* - * check whether or not a context switch is necessary - */ - .import _Context_Switch_necessary,data - ldil L%_Context_Switch_necessary,%r8 - ldw R%_Context_Switch_necessary(%r8),%r8 - comibf,=,n 0,%r8,ISR_dispatch - -/* - * check whether or not a context switch is necessary because an ISR - * sent signals to the interrupted task - */ - ldw R%_ISR_Signals_to_thread_executing(%r7),%r8 - comibt,=,n 0,%r8,isr_restore - - -/* - * OK, something happened while in ISR and we need to switch to a task - * other than the one which was interrupted or the - * ISR_Signals_to_thread_executing case - * We also turn on interrupts, since the interrupted task had them - * on (obviously :-) and Thread_Dispatch is happy to leave ints on. - */ - -ISR_dispatch: - stw %r0, R%_ISR_Signals_to_thread_executing(%r7) - - ssm HPPA_PSW_I, %r0 - - .import _Thread_Dispatch,code - .call - bl _Thread_Dispatch,%r2 - ldo 128(sp),sp - - ldo -128(sp),sp - -isr_restore: - -/* - * enable interrupts during most of restore - */ - ssm HPPA_PSW_I, %r0 - -/* - * Get a pointer to beginning of our stack frame - */ - ldo -CPU_INTERRUPT_FRAME_SIZE(sp), %arg1 - -/* - * restore float - */ - .call ARGW0=GR - bl _CPU_Restore_float_context,%r2 - ldo FP_CONTEXT_OFFSET(%arg1), arg0 - - copy %arg1, %arg0 - -/* - * ********** FALL THRU ********** - */ - -/* - * Jump here from bottom of Context_Switch - * Also called directly by _CPU_Context_Restart_self via _Thread_Restart_self - * restore interrupt state - */ - - .EXPORT _CPU_Context_restore -_CPU_Context_restore: - -/* - * restore integer state - */ - ldw R1_OFFSET(arg0),%r1 - ldw R2_OFFSET(arg0),%r2 - ldw R3_OFFSET(arg0),%r3 - ldw R4_OFFSET(arg0),%r4 - ldw R5_OFFSET(arg0),%r5 - ldw R6_OFFSET(arg0),%r6 - ldw R7_OFFSET(arg0),%r7 - ldw R8_OFFSET(arg0),%r8 - ldw R9_OFFSET(arg0),%r9 - ldw R10_OFFSET(arg0),%r10 - ldw R11_OFFSET(arg0),%r11 - ldw R12_OFFSET(arg0),%r12 - ldw R13_OFFSET(arg0),%r13 - ldw R14_OFFSET(arg0),%r14 - ldw R15_OFFSET(arg0),%r15 - ldw R16_OFFSET(arg0),%r16 - ldw R17_OFFSET(arg0),%r17 - ldw R18_OFFSET(arg0),%r18 - ldw R19_OFFSET(arg0),%r19 - ldw R20_OFFSET(arg0),%r20 - ldw R21_OFFSET(arg0),%r21 - ldw R22_OFFSET(arg0),%r22 - ldw R23_OFFSET(arg0),%r23 - ldw R24_OFFSET(arg0),%r24 -/* - * skipping r25; used as scratch register below - * skipping r26 (arg0) until we are done with it - */ - ldw R27_OFFSET(arg0),%r27 - ldw R28_OFFSET(arg0),%r28 - ldw R29_OFFSET(arg0),%r29 -/* - * skipping r30 (sp) until we turn off interrupts - */ - ldw R31_OFFSET(arg0),%r31 - -/* - * Turn off Q & R & I so we can write r30 and interrupt control registers - */ - rsm HPPA_PSW_Q + HPPA_PSW_R + HPPA_PSW_I, %r0 - -/* - * now safe to restore r30 - */ - ldw R30_OFFSET(arg0),%r30 - - ldw IPSW_OFFSET(arg0), %r25 - mtctl %r25, ipsw - - ldw SAR_OFFSET(arg0), %r25 - mtctl %r25, sar - - ldw PCOQFRONT_OFFSET(arg0), %r25 - mtctl %r25, pcoq - - ldw PCOQBACK_OFFSET(arg0), %r25 - mtctl %r25, pcoq - -/* - * Load r25 with interrupts off - */ - ldw R25_OFFSET(arg0),%r25 -/* - * Must load r26 (arg0) last - */ - ldw R26_OFFSET(arg0),%r26 - -isr_exit: - rfi - .EXIT - .PROCEND - -/* - * This section is used to context switch floating point registers. - * Ref: 6-35 of Architecture 1.1 - * - * NOTE: since integer multiply uses the floating point unit, - * we have to save/restore fp on every trap. We cannot - * just try to keep track of fp usage. - */ - - .align 32 - .EXPORT _CPU_Save_float_context,ENTRY,PRIV_LEV=0 -_CPU_Save_float_context: - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - fstds,ma %fr0,8(%arg0) - fstds,ma %fr1,8(%arg0) - fstds,ma %fr2,8(%arg0) - fstds,ma %fr3,8(%arg0) - fstds,ma %fr4,8(%arg0) - fstds,ma %fr5,8(%arg0) - fstds,ma %fr6,8(%arg0) - fstds,ma %fr7,8(%arg0) - fstds,ma %fr8,8(%arg0) - fstds,ma %fr9,8(%arg0) - fstds,ma %fr10,8(%arg0) - fstds,ma %fr11,8(%arg0) - fstds,ma %fr12,8(%arg0) - fstds,ma %fr13,8(%arg0) - fstds,ma %fr14,8(%arg0) - fstds,ma %fr15,8(%arg0) - fstds,ma %fr16,8(%arg0) - fstds,ma %fr17,8(%arg0) - fstds,ma %fr18,8(%arg0) - fstds,ma %fr19,8(%arg0) - fstds,ma %fr20,8(%arg0) - fstds,ma %fr21,8(%arg0) - fstds,ma %fr22,8(%arg0) - fstds,ma %fr23,8(%arg0) - fstds,ma %fr24,8(%arg0) - fstds,ma %fr25,8(%arg0) - fstds,ma %fr26,8(%arg0) - fstds,ma %fr27,8(%arg0) - fstds,ma %fr28,8(%arg0) - fstds,ma %fr29,8(%arg0) - fstds,ma %fr30,8(%arg0) - fstds %fr31,0(%arg0) - bv 0(%r2) - addi -(31*8), %arg0, %arg0 ; restore arg0 just for fun - .EXIT - .PROCEND - - .align 32 - .EXPORT _CPU_Restore_float_context,ENTRY,PRIV_LEV=0 -_CPU_Restore_float_context: - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - addi (31*8), %arg0, %arg0 ; point at last double - fldds 0(%arg0),%fr31 - fldds,mb -8(%arg0),%fr30 - fldds,mb -8(%arg0),%fr29 - fldds,mb -8(%arg0),%fr28 - fldds,mb -8(%arg0),%fr27 - fldds,mb -8(%arg0),%fr26 - fldds,mb -8(%arg0),%fr25 - fldds,mb -8(%arg0),%fr24 - fldds,mb -8(%arg0),%fr23 - fldds,mb -8(%arg0),%fr22 - fldds,mb -8(%arg0),%fr21 - fldds,mb -8(%arg0),%fr20 - fldds,mb -8(%arg0),%fr19 - fldds,mb -8(%arg0),%fr18 - fldds,mb -8(%arg0),%fr17 - fldds,mb -8(%arg0),%fr16 - fldds,mb -8(%arg0),%fr15 - fldds,mb -8(%arg0),%fr14 - fldds,mb -8(%arg0),%fr13 - fldds,mb -8(%arg0),%fr12 - fldds,mb -8(%arg0),%fr11 - fldds,mb -8(%arg0),%fr10 - fldds,mb -8(%arg0),%fr9 - fldds,mb -8(%arg0),%fr8 - fldds,mb -8(%arg0),%fr7 - fldds,mb -8(%arg0),%fr6 - fldds,mb -8(%arg0),%fr5 - fldds,mb -8(%arg0),%fr4 - fldds,mb -8(%arg0),%fr3 - fldds,mb -8(%arg0),%fr2 - fldds,mb -8(%arg0),%fr1 - bv 0(%r2) - fldds,mb -8(%arg0),%fr0 - .EXIT - .PROCEND - -/* - * These 2 small routines are unused right now. - * Normally we just go thru _CPU_Save_float_context (and Restore) - * - * Here we just deref the ptr and jump up, letting _CPU_Save_float_context - * do the return for us. - */ - - .EXPORT _CPU_Context_save_fp,ENTRY,PRIV_LEV=0 -_CPU_Context_save_fp: - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - bl _CPU_Save_float_context, %r0 - ldw 0(%arg0), %arg0 - .EXIT - .PROCEND - - .EXPORT _CPU_Context_restore_fp,ENTRY,PRIV_LEV=0 -_CPU_Context_restore_fp: - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - bl _CPU_Restore_float_context, %r0 - ldw 0(%arg0), %arg0 - .EXIT - .PROCEND - - -/* - * void _CPU_Context_switch( run_context, heir_context ) - * - * This routine performs a normal non-FP context switch. - */ - - .align 32 - .EXPORT _CPU_Context_switch,ENTRY,PRIV_LEV=0,ARGW0=GR,ARGW1=GR -_CPU_Context_switch: - .PROC - .CALLINFO FRAME=64 - .ENTRY - -/* - * Save the integer context - */ - stw %r1,R1_OFFSET(arg0) - stw %r2,R2_OFFSET(arg0) - stw %r3,R3_OFFSET(arg0) - stw %r4,R4_OFFSET(arg0) - stw %r5,R5_OFFSET(arg0) - stw %r6,R6_OFFSET(arg0) - stw %r7,R7_OFFSET(arg0) - stw %r8,R8_OFFSET(arg0) - stw %r9,R9_OFFSET(arg0) - stw %r10,R10_OFFSET(arg0) - stw %r11,R11_OFFSET(arg0) - stw %r12,R12_OFFSET(arg0) - stw %r13,R13_OFFSET(arg0) - stw %r14,R14_OFFSET(arg0) - stw %r15,R15_OFFSET(arg0) - stw %r16,R16_OFFSET(arg0) - stw %r17,R17_OFFSET(arg0) - stw %r18,R18_OFFSET(arg0) - stw %r19,R19_OFFSET(arg0) - stw %r20,R20_OFFSET(arg0) - stw %r21,R21_OFFSET(arg0) - stw %r22,R22_OFFSET(arg0) - stw %r23,R23_OFFSET(arg0) - stw %r24,R24_OFFSET(arg0) - stw %r25,R25_OFFSET(arg0) - stw %r26,R26_OFFSET(arg0) - stw %r27,R27_OFFSET(arg0) - stw %r28,R28_OFFSET(arg0) - stw %r29,R29_OFFSET(arg0) - stw %r30,R30_OFFSET(arg0) - stw %r31,R31_OFFSET(arg0) - -/* - * fill in interrupt context section - */ - stw %r2, PCOQFRONT_OFFSET(%arg0) - ldo 4(%r2), %r2 - stw %r2, PCOQBACK_OFFSET(%arg0) - -/* - * Generate a suitable IPSW by using the system default psw - * with the current low bits added in. - */ - - ldil L%CPU_PSW_DEFAULT, %r2 - ldo R%CPU_PSW_DEFAULT(%r2), %r2 - ssm 0, %arg2 - dep %arg2, 31, 8, %r2 - stw %r2, IPSW_OFFSET(%arg0) - -/* - * at this point, the running task context is completely saved - * Now jump to the bottom of the interrupt handler to load the - * heirs context - */ - - b _CPU_Context_restore - copy %arg1, %arg0 - - .EXIT - .PROCEND - - -/* - * Find first bit - * NOTE: - * This is used (and written) only for the ready chain code and - * priority bit maps. - * Any other use constitutes fraud. - * Returns first bit from the least significant side. - * Eg: if input is 0x8001 - * output will indicate the '1' bit and return 0. - * This is counter to HPPA bit numbering which calls this - * bit 31. This way simplifies the macros _CPU_Priority_Mask - * and _CPU_Priority_Bits_index. - * - * NOTE: - * We just use 16 bit version - * does not handle zero case - * - * Based on the UTAH Mach libc version of ffs. - */ - - .align 32 - .EXPORT hppa_rtems_ffs,ENTRY,PRIV_LEV=0,ARGW0=GR -hppa_rtems_ffs: - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - -#ifdef RETURN_ERROR_ON_ZERO - comb,= %arg0,%r0,ffsdone ; If arg0 is 0 - ldi -1,%ret0 ; return -1 -#endif - -#if BITFIELD_SIZE == 32 - ldi 31,%ret0 ; Set return to high bit - extru,= %arg0,31,16,%r0 ; If low 16 bits are non-zero - addi,tr -16,%ret0,%ret0 ; subtract 16 from bitpos - shd %r0,%arg0,16,%arg0 ; else shift right 16 bits -#else - ldi 15,%ret0 ; Set return to high bit -#endif - extru,= %arg0,31,8,%r0 ; If low 8 bits are non-zero - addi,tr -8,%ret0,%ret0 ; subtract 8 from bitpos - shd %r0,%arg0,8,%arg0 ; else shift right 8 bits - extru,= %arg0,31,4,%r0 ; If low 4 bits are non-zero - addi,tr -4,%ret0,%ret0 ; subtract 4 from bitpos - shd %r0,%arg0,4,%arg0 ; else shift right 4 bits - extru,= %arg0,31,2,%r0 ; If low 2 bits are non-zero - addi,tr -2,%ret0,%ret0 ; subtract 2 from bitpos - shd %r0,%arg0,2,%arg0 ; else shift right 2 bits - extru,= %arg0,31,1,%r0 ; If low bit is non-zero - addi -1,%ret0,%ret0 ; subtract 1 from bitpos -ffsdone: - bv,n 0(%r2) - nop - .EXIT - .PROCEND diff --git a/c/src/exec/score/cpu/hppa1.1/hppa.h b/c/src/exec/score/cpu/hppa1.1/hppa.h deleted file mode 100644 index 049981ea84..0000000000 --- a/c/src/exec/score/cpu/hppa1.1/hppa.h +++ /dev/null @@ -1,716 +0,0 @@ -/* - * Description: - * - * Definitions for HP PA Risc - * ref: PA RISC 1.1 Architecture and Instruction Set Reference Manual - * - * COPYRIGHT (c) 1994 by Division Incorporated - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * Note: - * This file is included by both C and assembler code ( -DASM ) - * - * $Id$ - */ - -#ifndef _INCLUDE_HPPA_H -#define _INCLUDE_HPPA_H - -#ifdef ASM -#include <rtems/score/targopts.h> -#endif - -#if defined(__cplusplus) -extern "C" { -#endif - -/* - * This section contains the information required to build - * RTEMS for a particular member of the Hewlett Packard - * PA-RISC family. It does this by setting variables to - * indicate which implementation dependent features are - * present in a particular member of the family. - */ - -#if defined(hppa7100) - -#define CPU_MODEL_NAME "hppa 7100" - -#elif defined(hppa7200) - -#define CPU_MODEL_NAME "hppa 7200" - -#else - -#error "Unsupported CPU Model" - -#endif - -/* - * Define the name of the CPU family. - */ - -#if !defined(CPU_NAME) -#define CPU_NAME "HP PA-RISC 1.1" -#endif - -/* - * Processor Status Word (PSW) Masks - */ - - -#define HPPA_PSW_Y 0x80000000 /* Data Debug Trap Disable */ -#define HPPA_PSW_Z 0x40000000 /* Instruction Debug Trap Disable */ -#define HPPA_PSW_r2 0x20000000 /* reserved */ -#define HPPA_PSW_r3 0x10000000 /* reserved */ -#define HPPA_PSW_r4 0x08000000 /* reserved */ -#define HPPA_PSW_E 0x04000000 /* Little Endian on Memory References */ -#define HPPA_PSW_S 0x02000000 /* Secure Interval Timer */ -#define HPPA_PSW_T 0x01000000 /* Taken Branch Trap Enable */ -#define HPPA_PSW_H 0x00800000 /* Higher-Privilege Transfer Trap Enable*/ -#define HPPA_PSW_L 0x00400000 /* Lower-Privilege Transfer Trap Enable */ -#define HPPA_PSW_N 0x00200000 /* PC Queue Front Instruction Nullified */ -#define HPPA_PSW_X 0x00100000 /* Data Memory Break Disable */ -#define HPPA_PSW_B 0x00080000 /* Taken Branch in Previous Cycle */ -#define HPPA_PSW_C 0x00040000 /* Code Address Translation Enable */ -#define HPPA_PSW_V 0x00020000 /* Divide Step Correction */ -#define HPPA_PSW_M 0x00010000 /* High-Priority Machine Check Disable */ -#define HPPA_PSW_CB 0x0000ff00 /* Carry/Borrow Bits */ -#define HPPA_PSW_r24 0x00000080 /* reserved */ -#define HPPA_PSW_G 0x00000040 /* Debug trap Enable */ -#define HPPA_PSW_F 0x00000020 /* Performance monitor interrupt unmask */ -#define HPPA_PSW_R 0x00000010 /* Recovery Counter Enable */ -#define HPPA_PSW_Q 0x00000008 /* Interruption State Collection Enable */ -#define HPPA_PSW_P 0x00000004 /* Protection ID Validation Enable */ -#define HPPA_PSW_D 0x00000002 /* Data Address Translation Enable */ -#define HPPA_PSW_I 0x00000001 /* External, Power Failure, */ - /* Low-Priority Machine Check */ - /* Interruption Enable */ - -/* - * HPPA traps and interrupts - * basic layout. Note numbers do not denote priority - * - * 0-31 basic traps and interrupts defined by HPPA architecture - * 0-31 32 external interrupts - * 32-... bsp defined - */ - -#define HPPA_TRAP_NON_EXISTENT 0 -/* group 1 */ -#define HPPA_TRAP_HIGH_PRIORITY_MACHINE_CHECK 1 -/* group 2 */ -#define HPPA_TRAP_POWER_FAIL 2 -#define HPPA_TRAP_RECOVERY_COUNTER 3 -#define HPPA_TRAP_EXTERNAL_INTERRUPT 4 -#define HPPA_TRAP_LOW_PRIORITY_MACHINE_CHECK 5 -#define HPPA_TRAP_PERFORMANCE_MONITOR 29 -/* group 3 */ -#define HPPA_TRAP_INSTRUCTION_TLB_MISS 6 -#define HPPA_TRAP_INSTRUCTION_MEMORY_PROTECTION 7 -#define HPPA_TRAP_INSTRUCTION_DEBUG 30 -#define HPPA_TRAP_ILLEGAL_INSTRUCTION 8 -#define HPPA_TRAP_BREAK_INSTRUCTION 9 -#define HPPA_TRAP_PRIVILEGED_OPERATION 10 -#define HPPA_TRAP_PRIVILEGED_REGISTER 11 -#define HPPA_TRAP_OVERFLOW 12 -#define HPPA_TRAP_CONDITIONAL 13 -#define HPPA_TRAP_ASSIST_EXCEPTION 14 -#define HPPA_TRAP_DATA_TLB_MISS 15 -#define HPPA_TRAP_NON_ACCESS_INSTRUCTION_TLB_MISS 16 -#define HPPA_TRAP_NON_ACCESS_DATA_TLB_MISS 17 -#define HPPA_TRAP_DATA_MEMORY_ACCESS_RIGHTS 26 -#define HPPA_TRAP_DATA_MEMORY_PROTECTION_ID 27 -#define HPPA_TRAP_UNALIGNED_DATA_REFERENCE 28 -#define HPPA_TRAP_DATA_MEMORY_PROTECTION 18 -#define HPPA_TRAP_DATA_MEMORY_BREAK 19 -#define HPPA_TRAP_TLB_DIRTY_BIT 20 -#define HPPA_TRAP_PAGE_REFERENCE 21 -#define HPPA_TRAP_DATA_DEBUG 31 -#define HPPA_TRAP_ASSIST_EMULATION 22 -/* group 4 */ -#define HPPA_TRAP_HIGHER_PRIVILEGE_TRANSFER 23 -#define HPPA_TRAP_LOWER_PRIVILEGE_TRANSFER 24 -#define HPPA_TRAP_TAKEN_BRANCH 25 - -#define HPPA_INTERNAL_TRAPS 32 - -/* External Interrupts via interrupt 4 */ - -#define HPPA_INTERRUPT_EXTERNAL_0 0 -#define HPPA_INTERRUPT_EXTERNAL_1 1 -#define HPPA_INTERRUPT_EXTERNAL_2 2 -#define HPPA_INTERRUPT_EXTERNAL_3 3 -#define HPPA_INTERRUPT_EXTERNAL_4 4 -#define HPPA_INTERRUPT_EXTERNAL_5 5 -#define HPPA_INTERRUPT_EXTERNAL_6 6 -#define HPPA_INTERRUPT_EXTERNAL_7 7 -#define HPPA_INTERRUPT_EXTERNAL_8 8 -#define HPPA_INTERRUPT_EXTERNAL_9 9 -#define HPPA_INTERRUPT_EXTERNAL_10 10 -#define HPPA_INTERRUPT_EXTERNAL_11 11 -#define HPPA_INTERRUPT_EXTERNAL_12 12 -#define HPPA_INTERRUPT_EXTERNAL_13 13 -#define HPPA_INTERRUPT_EXTERNAL_14 14 -#define HPPA_INTERRUPT_EXTERNAL_15 15 -#define HPPA_INTERRUPT_EXTERNAL_16 16 -#define HPPA_INTERRUPT_EXTERNAL_17 17 -#define HPPA_INTERRUPT_EXTERNAL_18 18 -#define HPPA_INTERRUPT_EXTERNAL_19 19 -#define HPPA_INTERRUPT_EXTERNAL_20 20 -#define HPPA_INTERRUPT_EXTERNAL_21 21 -#define HPPA_INTERRUPT_EXTERNAL_22 22 -#define HPPA_INTERRUPT_EXTERNAL_23 23 -#define HPPA_INTERRUPT_EXTERNAL_24 24 -#define HPPA_INTERRUPT_EXTERNAL_25 25 -#define HPPA_INTERRUPT_EXTERNAL_26 26 -#define HPPA_INTERRUPT_EXTERNAL_27 27 -#define HPPA_INTERRUPT_EXTERNAL_28 28 -#define HPPA_INTERRUPT_EXTERNAL_29 29 -#define HPPA_INTERRUPT_EXTERNAL_30 30 -#define HPPA_INTERRUPT_EXTERNAL_31 31 - -#define HPPA_INTERRUPT_EXTERNAL_INTERVAL_TIMER HPPA_INTERRUPT_EXTERNAL_0 -#define HPPA_EXTERNAL_INTERRUPTS 32 - -/* BSP defined interrupts begin here */ - -#define HPPA_INTERRUPT_MAX 32 - -/* - * Cache characteristics - */ - -#define HPPA_CACHELINE_SIZE 32 -#define HPPA_CACHELINE_MASK (HPPA_CACHELINE_SIZE - 1) - -/* - * page size characteristics - */ - -#define HPPA_PAGE_SIZE 4096 -#define HPPA_PAGE_MASK (0xfffff000) - - -/* - * TLB characteristics - * - * Flags and Access Control layout for using TLB protection insertion - * - * 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 - * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 - * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - * |?|?|T|D|B|type |PL1|Pl2|U| access id |?| - * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - * - */ - -/* - * Access rights (type + PL1 + PL2) - */ -#define HPPA_PROT_R 0x00c00000 /* Read Only, no Write, no Execute */ -#define HPPA_PROT_RW 0x01c00000 /* Read & Write Only, no Execute */ -#define HPPA_PROT_RX 0x02c00000 /* Read & Execute Only, no Write */ -#define HPPA_PROT_RWX 0x03c00000 /* Read, Write, Execute */ -#define HPPA_PROT_X0 0x04c00000 /* Execute Only, Promote to Level 0 */ -#define HPPA_PROT_X1 0x05c00000 /* Execute Only, Promote to Level 1 */ -#define HPPA_PROT_X2 0x06c00000 /* Execute Only, Promote to Level 2 */ -#define HPPA_PROT_X3 0x07c00000 /* Execute Only, Promote to Level 3 */ - -/* - * Floating point status register definitions - */ - -#define HPPA_FPSTATUS_ENABLE_I 0x00000001 /* inexact operation */ -#define HPPA_FPSTATUS_ENABLE_U 0x00000002 /* underflow */ -#define HPPA_FPSTATUS_ENABLE_O 0x00000004 /* overflow */ -#define HPPA_FPSTATUS_ENABLE_Z 0x00000008 /* division by zero */ -#define HPPA_FPSTATUS_ENABLE_V 0x00000010 /* invalid operation */ -#define HPPA_FPSTATUS_D 0x00000020 /* denormalize as zero */ -#define HPPA_FPSTATUS_T 0x00000040 /* delayed trap */ -#define HPPA_FPSTATUS_RM_MASK 0x00000600 /* rounding mode */ -#define HPPA_FPSTATUS_RM_SHIFT 9 -#define HPPA_FPSTATUS_CQ_MASK 0x001FFC00 /* compare queue */ -#define HPPA_FPSTATUS_CQ_SHIFT 13 -#define HPPA_FPSTATUS_C 0x04000000 /* most recent ompare bit */ -#define HPPA_FPSTATUS_FLAG_I 0x08000000 /* inexact */ -#define HPPA_FPSTATUS_FLAG_U 0x10000000 /* underflow */ -#define HPPA_FPSTATUS_FLAG_O 0x20000000 /* overflow */ -#define HPPA_FPSTATUS_FLAG_Z 0x40000000 /* division by zero */ -#define HPPA_FPSTATUS_FLAG_V 0x80000000 /* invalid operation */ - - -/* - * Inline macros for misc. interesting opcodes - */ - -/* generate a global label */ -#define HPPA_ASM_LABEL(label) \ - asm(".export " label ", ! .label " label); - -/* Return From Interrupt RFI */ -#define HPPA_ASM_RFI() asm volatile ("rfi") - -/* Set System Mask SSM i,t */ -#define HPPA_ASM_SSM(i,gr) asm volatile ("ssm %1, %0" \ - : "=r" (gr) \ - : "i" (i)) -/* Reset System Mask RSM i,t */ -#define HPPA_ASM_RSM(i,gr) asm volatile ("rsm %1, %0" \ - : "=r" (gr) \ - : "i" (i)) -/* Move To System Mask MTSM r */ -#define HPPA_ASM_MTSM(gr) asm volatile ("mtsm %0" \ - : : "r" (gr)) - -/* Load Space Identifier LDSID (s,b),t */ -#define HPPA_ASM_LDSID(sr,grb,grt) asm volatile ("ldsid (%1,%2),%0" \ - : "=r" (grt) \ - : "i" (sr), \ - "r" (grb)) - -/* - * Gcc extended asm doesn't really allow for treatment of space registers - * as "registers", so we have to use "i" format. - * Unfortunately this means that the "=" constraint is not available. - */ - -/* Move To Space Register MTSP r,sr */ -#define HPPA_ASM_MTSP(gr,sr) asm volatile ("mtsp %1,%0" \ - : : "i" (sr), \ - "r" (gr)) - -/* Move From Space Register MFSP sr,t */ -#define HPPA_ASM_MFSP(sr,gr) asm volatile ("mfsp %1,%0" \ - : "=r" (gr) \ - : "i" (sr)) - -/* Move To Control register MTCTL r,t */ -#define HPPA_ASM_MTCTL(gr,cr) asm volatile ("mtctl %1,%0" \ - : : "i" (cr), \ - "r" (gr)) - -/* Move From Control register MFCTL r,t */ -#define HPPA_ASM_MFCTL(cr,gr) asm volatile ("mfctl %1,%0" \ - : "=r" (gr) \ - : "i" (cr)) - -/* Synchronize caches SYNC */ -#define HPPA_ASM_SYNC() asm volatile ("sync") - -/* Probe Read Access PROBER (s,b),r,t */ -#define HPPA_ASM_PROBER(sr,groff,gracc,grt) \ - asm volatile ("prober (%1,%2),%3,%0" \ - : "=r" (grt) \ - : "i" (sr), \ - "r" (groff), \ - "r" (gracc)) - -/* Probe Read Access Immediate PROBERI (s,b),i,t*/ -#define HPPA_ASM_PROBERI(sr,groff,iacc,grt) \ - asm volatile ("proberi (%1,%2),%3,%0" \ - : "=r" (grt) \ - : "i" (sr), \ - "r" (groff), \ - "i" (iacc)) - -/* Probe Write Access PROBEW (s,b),r,t */ -#define HPPA_ASM_PROBEW(sr,groff,gracc,grt) \ - asm volatile ("probew (%1,%2),%3,%0" \ - : "=r" (grt) \ - : "i" (sr), \ - "r" (groff), \ - "r" (gracc)) - -/* Probe Write Access Immediate PROBEWI (s,b),i,t */ -#define HPPA_ASM_PROBEWI(sr,groff,iacc,grt) \ - asm volatile ("probewi (%1,%2),%3,%0" \ - : "=r" (grt) \ - : "i" (sr), \ - "r" (groff), \ - "i" (iacc)) - -/* Load Physical Address LPA x(s,b),t */ -#define HPPA_ASM_LPA(sr,grb,grt) asm volatile ("lpa %%r0(%1,%2),%0" \ - : "=r" (grt) \ - : "i" (sr), \ - "r" (grb)) - -/* Load Coherence Index LCI x(s,b),t */ -/* AKA: Load Hash Address LHA x(s,b),t */ -#define HPPA_ASM_LCI(grx,sr,grb,grt) asm volatile ("lha %1(%2,%3),%0" \ - : "=r" (grt) \ - : "r" (grx),\ - "i" (sr), \ - "r" (grb)) -#define HPPA_ASM_LHA(grx,sr,grb,grt) HPPA_ASM_LCI(grx,sr,grb,grt) - -/* Purge Data Tlb PDTLB x(s,b) */ -#define HPPA_ASM_PDTLB(grx,sr,grb) asm volatile ("pdtlb %0(%1,%2)" \ - : : "r" (grx), \ - "i" (sr), \ - "r" (grb)) - -/* Purge Instruction Tlb PITLB x(s,b) */ -#define HPPA_ASM_PITLB(grx,sr,grb) asm volatile ("pitlb %0(%1,%2)" \ - : : "r" (grx), \ - "i" (sr), \ - "r" (grb)) - -/* Purge Data Tlb Entry PDTLBE x(s,b) */ -#define HPPA_ASM_PDTLBE(grx,sr,grb) asm volatile ("pdtlbe %0(%1,%2)" \ - : : "r" (grx), \ - "i" (sr), \ - "r" (grb)) - -/* Purge Instruction Tlb Entry PITLBE x(s,b) */ -#define HPPA_ASM_PITLBE(grx,sr,grb) asm volatile ("pitlbe %0(%1,%2)" \ - : : "r" (grx), \ - "i" (sr), \ - "r" (grb)) - - -/* Insert Data TLB Address IDTLBA r,(s,b) */ -#define HPPA_ASM_IDTLBA(gr,sr,grb) asm volatile ("idtlba %0,(%1,%2)" \ - : : "r" (gr), \ - "i" (sr), \ - "r" (grb)) - -/* Insert Instruction TLB Address IITLBA r,(s,b) */ -#define HPPA_ASM_IITLBA(gr,sr,grb) asm volatile ("iitlba %0,(%1,%2)" \ - : : "r" (gr), \ - "i" (sr), \ - "r" (grb)) - -/* Insert Data TLB Protection IDTLBP r,(s,b) */ -#define HPPA_ASM_IDTLBP(gr,sr,grb) asm volatile ("idtlbp %0,(%1,%2)" \ - : : "r" (gr), \ - "i" (sr), \ - "r" (grb)) - -/* Insert Instruction TLB Protection IITLBP r,(s,b) */ -#define HPPA_ASM_IITLBP(gr,sr,grb) asm volatile ("iitlbp %0,(%1,%2)" \ - : : "r" (gr), \ - "i" (sr), \ - "r" (grb)) - -/* Purge Data Cache PDC x(s,b) */ -#define HPPA_ASM_PDC(grx,sr,grb) asm volatile ("pdc %0(%1,%2)" \ - : : "r" (grx), \ - "i" (sr), \ - "r" (grb)) - -/* Flush Data Cache FDC x(s,b) */ -#define HPPA_ASM_FDC(grx,sr,grb) asm volatile ("fdc %0(%1,%2)" \ - : : "r" (grx), \ - "i" (sr), \ - "r" (grb)) - -/* Flush Instruction Cache FDC x(s,b) */ -#define HPPA_ASM_FIC(grx,sr,grb) asm volatile ("fic %0(%1,%2)" \ - : : "r" (grx), \ - "i" (sr), \ - "r" (grb)) - -/* Flush Data Cache Entry FDCE x(s,b) */ -#define HPPA_ASM_FDCE(grx,sr,grb) asm volatile ("fdce %0(%1,%2)" \ - : : "r" (grx), \ - "i" (sr), \ - "r" (grb)) - -/* Flush Instruction Cache Entry FICE x(s,b) */ -#define HPPA_ASM_FICE(grx,sr,grb) asm volatile ("fice %0(%1,%2)" \ - : : "r" (grx), \ - "i" (sr), \ - "r" (grb)) - -/* Break BREAK i5,i13 */ -#define HPPA_ASM_BREAK(i5,i13) asm volatile ("break %0,%1" \ - : : "i" (i5), \ - "i" (i13)) - -/* Load and Clear Word Short LDCWS d(s,b),t */ -#define HPPA_ASM_LDCWS(i,sr,grb,grt) asm volatile ("ldcws %1(%2,%3),%0" \ - : "=r" (grt) \ - : "i" (i), \ - "i" (sr), \ - "r" (grb)) - -/* Load and Clear Word Indexed LDCWX x(s,b),t */ -#define HPPA_ASM_LDCWX(grx,sr,grb,grt) asm volatile ("ldcwx %1(%2,%3),%0" \ - : "=r" (grt) \ - : "r" (grx), \ - "i" (sr), \ - "r" (grb)) - -/* Load Word Absolute Short LDWAS d(b),t */ -/* NOTE: "short" here means "short displacement" */ -#define HPPA_ASM_LDWAS(disp,grbase,gr) asm volatile("ldwas %1(%2),%0" \ - : "=r" (gr) \ - : "i" (disp), \ - "r" (grbase)) - -/* Store Word Absolute Short STWAS r,d(b) */ -/* NOTE: "short" here means "short displacement" */ -#define HPPA_ASM_STWAS(gr,disp,grbase) asm volatile("stwas %0,%1(%2)" \ - : : "r" (gr), \ - "i" (disp), \ - "r" (grbase)) - -/* - * Swap bytes - * REFERENCE: PA72000 TRM -- Appendix C - */ -#define HPPA_ASM_SWAPBYTES(value, swapped) asm volatile( \ - " shd %1,%1,16,%0 \n\ - dep %0,15,8,%0 \n\ - shd %1,%0,8,%0" \ - : "=r" (swapped) \ - : "r" (value) \ - ) - - -/* 72000 Diagnose instructions follow - * These macros assume gas knows about these instructions. - * gas2.2.u1 did not. - * I added them to my copy and installed it locally. - * - * There are *very* special requirements for these guys - * ref: TRM 6.1.3 Programming Constraints - * - * The macros below handle the following rules - * - * Except for WIT, WDT, WDD, WIDO, WIDE, all DIAGNOSE must be doubled. - * Must never be nullified (hence the leading nop) - * NOP must preced every RDD,RDT,WDD,WDT,RDTLB - * Instruction preceeding GR_SHDW must not set any of the GR's saved - * - * The macros do *NOT* deal with the following problems - * doubled DIAGNOSE instructions must not straddle a page boundary - * if code translation enabled. (since 2nd could trap on ITLB) - * If you care about DHIT and DPE bits of DR0, then - * No store instruction in the 2 insn window before RDD - */ - - -/* Move To CPU/DIAG register MTCPU r,t */ -#define HPPA_ASM_MTCPU(gr,dr) asm volatile (" nop \n" \ - " mtcpu %1,%0 \n" \ - " mtcpu %1,%0" \ - : : "i" (dr), \ - "r" (gr)) - -/* Move From CPU/DIAG register MFCPU r,t */ -#define HPPA_ASM_MFCPU(dr,gr) asm volatile (" nop \n" \ - " mfcpu %1,%0\n" \ - " mfcpu %1,%0" \ - : "=r" (gr) \ - : "i" (dr)) - -/* Transfer of Control Enable TOC_EN */ -#define HPPA_ASM_TOC_EN() asm volatile (" tocen \n" \ - " tocen") - -/* Transfer of Control Disable TOC_DIS */ -#define HPPA_ASM_TOC_DIS() asm volatile (" tocdis \n" \ - " tocdis") - -/* Shadow Registers to General Register SHDW_GR */ -#define HPPA_ASM_SHDW_GR() asm volatile (" shdwgr \n" \ - " shdwgr" \ - ::: "r1" "r8" "r9" "r16" \ - "r17" "r24" "r25") - -/* General Registers to Shadow Register GR_SHDW */ -#define HPPA_ASM_GR_SHDW() asm volatile (" nop \n" \ - " grshdw \n" \ - " grshdw") - -/* - * Definitions of special registers for use by the above macros. - */ - -/* Hardware Space Registers */ -#define HPPA_SR0 0 -#define HPPA_SR1 1 -#define HPPA_SR2 2 -#define HPPA_SR3 3 -#define HPPA_SR4 4 -#define HPPA_SR5 5 -#define HPPA_SR6 6 -#define HPPA_SR7 7 - -/* Hardware Control Registers */ -#define HPPA_CR0 0 -#define HPPA_RCTR 0 /* Recovery Counter Register */ - -#define HPPA_CR8 8 /* Protection ID 1 */ -#define HPPA_PIDR1 8 - -#define HPPA_CR9 9 /* Protection ID 2 */ -#define HPPA_PIDR2 9 - -#define HPPA_CR10 10 -#define HPPA_CCR 10 /* Coprocessor Confiquration Register */ - -#define HPPA_CR11 11 -#define HPPA_SAR 11 /* Shift Amount Register */ - -#define HPPA_CR12 12 -#define HPPA_PIDR3 12 /* Protection ID 3 */ - -#define HPPA_CR13 13 -#define HPPA_PIDR4 13 /* Protection ID 4 */ - -#define HPPA_CR14 14 -#define HPPA_IVA 14 /* Interrupt Vector Address */ - -#define HPPA_CR15 15 -#define HPPA_EIEM 15 /* External Interrupt Enable Mask */ - -#define HPPA_CR16 16 -#define HPPA_ITMR 16 /* Interval Timer */ - -#define HPPA_CR17 17 -#define HPPA_PCSQ 17 /* Program Counter Space queue */ - -#define HPPA_CR18 18 -#define HPPA_PCOQ 18 /* Program Counter Offset queue */ - -#define HPPA_CR19 19 -#define HPPA_IIR 19 /* Interruption Instruction Register */ - -#define HPPA_CR20 20 -#define HPPA_ISR 20 /* Interruption Space Register */ - -#define HPPA_CR21 21 -#define HPPA_IOR 21 /* Interruption Offset Register */ - -#define HPPA_CR22 22 -#define HPPA_IPSW 22 /* Interrpution Processor Status Word */ - -#define HPPA_CR23 23 -#define HPPA_EIRR 23 /* External Interrupt Request */ - -#define HPPA_CR24 24 -#define HPPA_PPDA 24 /* Physcial Page Directory Address */ -#define HPPA_TR0 24 /* Temporary register 0 */ - -#define HPPA_CR25 25 -#define HPPA_HTA 25 /* Hash Table Address */ -#define HPPA_TR1 25 /* Temporary register 1 */ - -#define HPPA_CR26 26 -#define HPPA_TR2 26 /* Temporary register 2 */ - -#define HPPA_CR27 27 -#define HPPA_TR3 27 /* Temporary register 3 */ - -#define HPPA_CR28 28 -#define HPPA_TR4 28 /* Temporary register 4 */ - -#define HPPA_CR29 29 -#define HPPA_TR5 29 /* Temporary register 5 */ - -#define HPPA_CR30 30 -#define HPPA_TR6 30 /* Temporary register 6 */ - -#define HPPA_CR31 31 -#define HPPA_CPUID 31 /* MP identifier */ - -/* - * Diagnose registers - */ - -#define HPPA_DR0 0 -#define HPPA_DR1 1 -#define HPPA_DR8 8 -#define HPPA_DR24 24 -#define HPPA_DR25 25 - -/* - * Tear apart a break instruction to find its type. - */ -#define HPPA_BREAK5(x) ((x) & 0x1F) -#define HPPA_BREAK13(x) (((x) >> 13) & 0x1FFF) - -/* assemble a break instruction */ -#define HPPA_BREAK(i5,i13) (((i5) & 0x1F) | (((i13) & 0x1FFF) << 13)) - - -/* - * this won't work in ASM or non-GNU compilers - */ - -#if !defined(ASM) && defined(__GNUC__) - -/* - * static inline utility functions to get at control registers - */ - -#define EMIT_GET_CONTROL(name, reg) \ -static __inline__ unsigned int \ -get_ ## name (void) \ -{ \ - unsigned int value; \ - HPPA_ASM_MFCTL(reg, value); \ - return value; \ -} - -#define EMIT_SET_CONTROL(name, reg) \ -static __inline__ void \ -set_ ## name (unsigned int new_value) \ -{ \ - HPPA_ASM_MTCTL(new_value, reg); \ -} - -#define EMIT_CONTROLS(name, reg) \ - EMIT_GET_CONTROL(name, reg) \ - EMIT_SET_CONTROL(name, reg) - -EMIT_CONTROLS(recovery, HPPA_RCTR); /* CR0 */ -EMIT_CONTROLS(pid1, HPPA_PIDR1); /* CR8 */ -EMIT_CONTROLS(pid2, HPPA_PIDR2); /* CR9 */ -EMIT_CONTROLS(ccr, HPPA_CCR); /* CR10; CCR and SCR share CR10 */ -EMIT_CONTROLS(scr, HPPA_CCR); /* CR10; CCR and SCR share CR10 */ -EMIT_CONTROLS(sar, HPPA_SAR); /* CR11 */ -EMIT_CONTROLS(pid3, HPPA_PIDR3); /* CR12 */ -EMIT_CONTROLS(pid4, HPPA_PIDR4); /* CR13 */ -EMIT_CONTROLS(iva, HPPA_IVA); /* CR14 */ -EMIT_CONTROLS(eiem, HPPA_EIEM); /* CR15 */ -EMIT_CONTROLS(itimer, HPPA_ITMR); /* CR16 */ -EMIT_CONTROLS(pcsq, HPPA_PCSQ); /* CR17 */ -EMIT_CONTROLS(pcoq, HPPA_PCOQ); /* CR18 */ -EMIT_CONTROLS(iir, HPPA_IIR); /* CR19 */ -EMIT_CONTROLS(isr, HPPA_ISR); /* CR20 */ -EMIT_CONTROLS(ior, HPPA_IOR); /* CR21 */ -EMIT_CONTROLS(ipsw, HPPA_IPSW); /* CR22 */ -EMIT_CONTROLS(eirr, HPPA_EIRR); /* CR23 */ -EMIT_CONTROLS(tr0, HPPA_TR0); /* CR24 */ -EMIT_CONTROLS(tr1, HPPA_TR1); /* CR25 */ -EMIT_CONTROLS(tr2, HPPA_TR2); /* CR26 */ -EMIT_CONTROLS(tr3, HPPA_TR3); /* CR27 */ -EMIT_CONTROLS(tr4, HPPA_TR4); /* CR28 */ -EMIT_CONTROLS(tr5, HPPA_TR5); /* CR29 */ -EMIT_CONTROLS(tr6, HPPA_TR6); /* CR30 */ -EMIT_CONTROLS(tr7, HPPA_CR31); /* CR31 */ - -#endif /* ASM and GNU */ - -/* - * If and How to invoke the debugger (a ROM debugger generally) - */ -#define CPU_INVOKE_DEBUGGER \ - do { \ - HPPA_ASM_BREAK(1,1); \ - } while (0) - -#ifdef __cplusplus -} -#endif - -#endif /* ! _INCLUDE_HPPA_H */ - diff --git a/c/src/exec/score/cpu/hppa1.1/hppatypes.h b/c/src/exec/score/cpu/hppa1.1/hppatypes.h deleted file mode 100644 index 512323819b..0000000000 --- a/c/src/exec/score/cpu/hppa1.1/hppatypes.h +++ /dev/null @@ -1,46 +0,0 @@ -/* hppatypes.h - * - * This include file contains type definitions pertaining to the Hewlett - * Packard PA-RISC processor family. - * - * $Id$ - */ - -#ifndef _INCLUDE_HPPATYPES_H -#define _INCLUDE_HPPATYPES_H - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section defines the basic types for this processor. - */ - -typedef unsigned char unsigned8; /* 8-bit unsigned integer */ -typedef unsigned short unsigned16; /* 16-bit unsigned integer */ -typedef unsigned int unsigned32; /* 32-bit unsigned integer */ -typedef unsigned long long unsigned64; /* 64-bit unsigned integer */ - -typedef unsigned16 Priority_Bit_map_control; - -typedef signed char signed8; /* 8-bit signed integer */ -typedef signed short signed16; /* 16-bit signed integer */ -typedef signed int signed32; /* 32-bit signed integer */ -typedef signed long long signed64; /* 64 bit signed integer */ - -typedef unsigned32 boolean; /* Boolean value */ - -typedef float single_precision; /* single precision float */ -typedef double double_precision; /* double precision float */ - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif /* _INCLUDE_HPPATYPES_H */ -/* end of include file */ diff --git a/c/src/exec/score/cpu/hppa1.1/rtems.s b/c/src/exec/score/cpu/hppa1.1/rtems.s deleted file mode 100644 index 3f02c9d006..0000000000 --- a/c/src/exec/score/cpu/hppa1.1/rtems.s +++ /dev/null @@ -1,53 +0,0 @@ -/* rtems.S - * - * This file contains the single entry point code for - * the HPPA implementation of RTEMS. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <rtems/score/hppa.h> -#include <rtems/score/cpu_asm.h> - - .SPACE $PRIVATE$ - .SUBSPA $DATA$,QUAD=1,ALIGN=8,ACCESS=31 - .SUBSPA $BSS$,QUAD=1,ALIGN=8,ACCESS=31,ZERO,SORT=82 - .SPACE $TEXT$ - .SUBSPA $LIT$,QUAD=0,ALIGN=8,ACCESS=44 - .SUBSPA $CODE$,QUAD=0,ALIGN=8,ACCESS=44,CODE_ONLY - .SPACE $TEXT$ - .SUBSPA $CODE$ - - .align 32 - .EXPORT cpu_jump_to_directive,ENTRY,PRIV_LEV=0 -cpu_jump_to_directive - .PROC - .CALLINFO FRAME=0,NO_CALLS - .ENTRY - -# invoke user interrupt handler - -# XXX: look at register usage and code -# XXX: this is not necessarily right!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -# r9 = directive number - - .import _Entry_points,data - ldil L%_Entry_points,%r8 - ldo R%_Entry_points(%r8),%r8 - ldwx,s %r9(%r8),%r8 - - .call ARGW0=GR - bv,n 0(%r8) - nop - - .EXIT - .PROCEND - diff --git a/c/src/exec/score/cpu/i386/Makefile.in b/c/src/exec/score/cpu/i386/Makefile.in deleted file mode 100644 index af64e214dd..0000000000 --- a/c/src/exec/score/cpu/i386/Makefile.in +++ /dev/null @@ -1,81 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - -RELS=$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -C_PIECES=cpu -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) - -H_FILES=$(srcdir)/cpu.h $(srcdir)/i386.h $(srcdir)/i386types.h - -# H_FILES that get installed externally -# i386.h is handled specially -EXTERNAL_H_FILES = $(srcdir)/asm.h - -# Assembly source names, if any, go here -- minus the .s -S_PIECES=cpu_asm rtems -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) - -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(ARCH)/rtems-cpu.rel: $(OBJS) - $(make-rel) - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(RELS) - -# Install the program(s), appending _g or _p as appropriate. -# for include files, just use $(INSTALL) -install: all - -preinstall: $(ARCH) \ - $(PROJECT_INCLUDE)/rtems/score/targopts.h \ - ${PROJECT_RELEASE}/lib/bsp_specs - $(INSTALL) -m 444 ${H_FILES} $(PROJECT_INCLUDE)/rtems/score -# we will share the basic cpu file - $(INSTALL) -m 444 ${EXTERNAL_H_FILES} $(PROJECT_INCLUDE) - -$(PROJECT_INCLUDE)/rtems/score/targopts.h: $(ARCH)/targopts.h-tmp - $(INSTALL) -m 444 $(ARCH)/targopts.h-tmp $@ - -# $(ARCH)/targopts.h-tmp rule is in leaf.cfg - -${PROJECT_RELEASE}/lib/bsp_specs: $(ARCH)/bsp_specs.tmp - $(INSTALL) -m 444 $(ARCH)/bsp_specs.tmp $@ - -# $(ARCH)/bsp_specs.tmp rule is in leaf.cfg diff --git a/c/src/exec/score/cpu/i386/asm.h b/c/src/exec/score/cpu/i386/asm.h deleted file mode 100644 index 9fe867c04c..0000000000 --- a/c/src/exec/score/cpu/i386/asm.h +++ /dev/null @@ -1,151 +0,0 @@ -/* asm.h - * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. - * - * - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - * - * COPYRIGHT: - * - * This file is based on similar code found in newlib available - * from ftp.cygnus.com. The file which was used had no copyright - * notice. This file is freely distributable as long as the source - * of the file is noted. This file is: - * - * COPYRIGHT (c) 1994-1997. - * On-Line Applications Research Corporation (OAR). - * - * $Id$ - */ - -#ifndef __i386_ASM_h -#define __i386_ASM_h - -/* - * Indicate we are in an assembly file and get the basic CPU definitions. - */ - -#ifndef ASM -#define ASM -#endif -#include <rtems/score/targopts.h> -#include <rtems/score/i386.h> - -/* - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. - */ - -/* - * Go32 suffers the same bug as __REGISTER_PREFIX__ - */ - -#if __GO32__ -#undef __USER_LABEL_PREFIX__ -#define __USER_LABEL_PREFIX__ _ -#endif - -#ifndef __USER_LABEL_PREFIX__ -#define __USER_LABEL_PREFIX__ _ -#endif - -/* - * Looks like there is a bug in gcc 2.6.2 where this is not - * defined correctly when configured as i386-coff and - * i386-aout. - */ - -#undef __REGISTER_PREFIX__ -#define __REGISTER_PREFIX__ % - -/* -#ifndef __REGISTER_PREFIX__ -#define __REGISTER_PREFIX__ -#endif -*/ - -/* ANSI concatenation macros. */ - -#define CONCAT1(a, b) CONCAT2(a, b) -#define CONCAT2(a, b) a ## b - -/* Use the right prefix for global labels. */ - -#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) - -/* Use the right prefix for registers. */ - -#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) - -#define eax REG (eax) -#define ebx REG (ebx) -#define ecx REG (ecx) -#define edx REG (edx) -#define esi REG (esi) -#define edi REG (edi) -#define esp REG (esp) -#define ebp REG (ebp) -#define cr0 REG (cr0) - -#define ax REG (ax) -#define bx REG (bx) -#define cx REG (cx) -#define dx REG (dx) -#define si REG (si) -#define di REG (di) -#define sp REG (sp) -#define bp REG (bp) - -#define ah REG (ah) -#define bh REG (bh) -#define ch REG (ch) -#define dh REG (dh) - -#define al REG (al) -#define bl REG (bl) -#define cl REG (cl) -#define dl REG (dl) - -#define cs REG (cs) -#define ds REG (ds) -#define es REG (es) -#define fs REG (fs) -#define gs REG (gs) -#define ss REG (ss) - -/* - * Define macros to handle section beginning and ends. - */ - - -#define BEGIN_CODE_DCL .text -#define END_CODE_DCL -#define BEGIN_DATA_DCL .data -#define END_DATA_DCL -#define BEGIN_CODE .text -#define END_CODE -#define BEGIN_DATA .data -#define END_DATA -#define BEGIN_BSS .bss -#define END_BSS -#define END - -/* - * Following must be tailor for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. - */ - -#define PUBLIC(sym) .globl SYM (sym) -#define EXTERN(sym) .globl SYM (sym) - -#endif -/* end of include file */ - - diff --git a/c/src/exec/score/cpu/i386/cpu.c b/c/src/exec/score/cpu/i386/cpu.c deleted file mode 100644 index 90473bdb14..0000000000 --- a/c/src/exec/score/cpu/i386/cpu.c +++ /dev/null @@ -1,185 +0,0 @@ -/* - * Intel i386 Dependent Source - * - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/score/isr.h> -#include <bspIo.h> -#include <rtems/score/thread.h> - - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: - * cpu_table - CPU table to initialize - * thread_dispatch - address of disptaching routine - */ - - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) /* ignored on this CPU */ -) -{ - register unsigned16 fp_status asm ("ax"); - register void *fp_context; - - _CPU_Table = *cpu_table; - - /* - * The following code saves a NULL i387 context which is given - * to each task at start and restart time. The following code - * is based upon that provided in the i386 Programmer's - * Manual and should work on any coprocessor greater than - * the i80287. - * - * NOTE: The NO RTEMS_WAIT form of the coprocessor instructions - * MUST be used in case there is not a coprocessor - * to wait for. - */ - - fp_status = 0xa5a5; - asm volatile( "fninit" ); - asm volatile( "fnstsw %0" : "=a" (fp_status) : "0" (fp_status) ); - - if ( fp_status == 0 ) { - - fp_context = &_CPU_Null_fp_context; - - asm volatile( "fsave (%0)" : "=r" (fp_context) - : "0" (fp_context) - ); - } -} - -/*PAGE - * - * _CPU_ISR_Get_level - */ - -unsigned32 _CPU_ISR_Get_level( void ) -{ - unsigned32 level; - - i386_get_interrupt_level( level ); - - return level; -} - -void _CPU_Thread_Idle_body () -{ - while(1){ - asm volatile ("hlt"); - } -} - -void _defaultExcHandler (CPU_Exception_frame *ctx) -{ - printk("----------------------------------------------------------\n"); - printk("Exception %d caught at PC %x by thread %d\n", - ctx->idtIndex, - ctx->eip, - _Thread_Executing->Object.id); - printk("----------------------------------------------------------\n"); - printk("Processor execution context at time of the fault was :\n"); - printk("----------------------------------------------------------\n"); - printk(" EAX = %x EBX = %x ECX = %x EDX = %x\n", - ctx->eax, ctx->ebx, ctx->ecx, ctx->edx); - printk(" ESI = %x EDI = %x EBP = %x ESP = %x\n", - ctx->esi, ctx->edi, ctx->ebp, ctx->esp0); - printk("----------------------------------------------------------\n"); - printk("Error code pushed by processor itself (if not 0) = %x\n", - ctx->faultCode); - printk("----------------------------------------------------------\n\n"); - if (_ISR_Nest_level > 0) { - /* - * In this case we shall not delete the task interrupted as - * it has nothing to do with the fault. We cannot return either - * because the eip points to the faulty instruction so... - */ - printk("Exception while executing ISR!!!. System locked\n"); - while(1); - } - else { - /* - * OK I could probably use a simplified version but at least this - * should work. - */ - printk(" ************ FAULTY THREAD WILL BE DELETED **************\n"); - rtems_task_delete(_Thread_Executing->Object.id); - } -} - -cpuExcHandlerType _currentExcHandler = _defaultExcHandler; - -extern void rtems_exception_prologue_0(); -extern void rtems_exception_prologue_1(); -extern void rtems_exception_prologue_2(); -extern void rtems_exception_prologue_3(); -extern void rtems_exception_prologue_4(); -extern void rtems_exception_prologue_5(); -extern void rtems_exception_prologue_6(); -extern void rtems_exception_prologue_7(); -extern void rtems_exception_prologue_8(); -extern void rtems_exception_prologue_9(); -extern void rtems_exception_prologue_10(); -extern void rtems_exception_prologue_11(); -extern void rtems_exception_prologue_12(); -extern void rtems_exception_prologue_13(); -extern void rtems_exception_prologue_14(); -extern void rtems_exception_prologue_16(); -extern void rtems_exception_prologue_17(); -extern void rtems_exception_prologue_18(); - -static rtems_raw_irq_hdl tbl[] = { - rtems_exception_prologue_0, - rtems_exception_prologue_1, - rtems_exception_prologue_2, - rtems_exception_prologue_3, - rtems_exception_prologue_4, - rtems_exception_prologue_5, - rtems_exception_prologue_6, - rtems_exception_prologue_7, - rtems_exception_prologue_8, - rtems_exception_prologue_9, - rtems_exception_prologue_10, - rtems_exception_prologue_11, - rtems_exception_prologue_12, - rtems_exception_prologue_13, - rtems_exception_prologue_14, - rtems_exception_prologue_16, - rtems_exception_prologue_17, - rtems_exception_prologue_18, -}; - -void rtems_exception_init_mngt() -{ - unsigned int i,j; - interrupt_gate_descriptor *currentIdtEntry; - unsigned limit; - unsigned level; - - i = sizeof(tbl) / sizeof (rtems_raw_irq_hdl); - - i386_get_info_from_IDTR (¤tIdtEntry, &limit); - - _CPU_ISR_Disable(level); - for (j = 0; j < i; j++) { - create_interrupt_gate_descriptor (¤tIdtEntry[j], tbl[j]); - } - _CPU_ISR_Enable(level); -} - diff --git a/c/src/exec/score/cpu/i386/cpu.h b/c/src/exec/score/cpu/i386/cpu.h deleted file mode 100644 index 28d450dad6..0000000000 --- a/c/src/exec/score/cpu/i386/cpu.h +++ /dev/null @@ -1,485 +0,0 @@ -/* cpu.h - * - * This include file contains information pertaining to the Intel - * i386 processor. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __CPU_h -#define __CPU_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/score/i386.h> /* pick up machine definitions */ -#include <libcpu/cpu.h> - -#ifndef ASM -#include <rtems/score/i386types.h> -#endif - -/* conditional compilation parameters */ - -#define CPU_INLINE_ENABLE_DISPATCH TRUE -#define CPU_UNROLL_ENQUEUE_PRIORITY FALSE - -/* - * i386 has an RTEMS allocated and managed interrupt stack. - */ - -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK TRUE -#define CPU_HAS_HARDWARE_INTERRUPT_STACK FALSE -#define CPU_ALLOCATE_INTERRUPT_STACK TRUE - -/* - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? - */ - -#define CPU_ISR_PASSES_FRAME_POINTER 0 - -/* - * Some family members have no FP, some have an FPU such as the i387 - * for the i386, others have it built in (i486DX, Pentium). - */ - -#if ( I386_HAS_FPU == 1 ) -#define CPU_HARDWARE_FP TRUE /* i387 for i386 */ -#else -#define CPU_HARDWARE_FP FALSE -#endif - -#define CPU_ALL_TASKS_ARE_FP FALSE -#define CPU_IDLE_TASK_IS_FP FALSE -#define CPU_USE_DEFERRED_FP_SWITCH TRUE - -#define CPU_STACK_GROWS_UP FALSE -#define CPU_STRUCTURE_ALIGNMENT - -/* - * Does this port provide a CPU dependent IDLE task implementation? - * - * If TRUE, then the routine _CPU_Thread_Idle_body - * must be provided and is the default IDLE thread body instead of - * _CPU_Thread_Idle_body. - * - * If FALSE, then use the generic IDLE thread body if the BSP does - * not provide one. - */ - -#define CPU_PROVIDES_IDLE_THREAD_BODY TRUE - -/* - * Define what is required to specify how the network to host conversion - * routines are handled. - */ - -#define CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE -#define CPU_BIG_ENDIAN FALSE -#define CPU_LITTLE_ENDIAN TRUE - -/* structures */ - -/* - * Basic integer context for the i386 family. - */ - -typedef struct { - unsigned32 eflags; /* extended flags register */ - void *esp; /* extended stack pointer register */ - void *ebp; /* extended base pointer register */ - unsigned32 ebx; /* extended bx register */ - unsigned32 esi; /* extended source index register */ - unsigned32 edi; /* extended destination index flags register */ -} Context_Control; - -/* - * FP context save area for the i387 numeric coprocessors. - */ - -typedef struct { - unsigned8 fp_save_area[108]; /* context size area for I80387 */ - /* 28 bytes for environment */ -} Context_Control_fp; - - -/* - * The following structure defines the set of information saved - * on the current stack by RTEMS upon receipt of execptions. - * - * idtIndex is either the interrupt number or the trap/exception number. - * faultCode is the code pushed by the processor on some exceptions. - */ - -typedef struct { - unsigned32 edi; - unsigned32 esi; - unsigned32 ebp; - unsigned32 esp0; - unsigned32 ebx; - unsigned32 edx; - unsigned32 ecx; - unsigned32 eax; - unsigned32 idtIndex; - unsigned32 faultCode; - unsigned32 eip; - unsigned32 cs; - unsigned32 eflags; -} CPU_Exception_frame; - -typedef void (*cpuExcHandlerType) (CPU_Exception_frame*); -extern cpuExcHandlerType _currentExcHandler; -extern void rtems_exception_init_mngt(); - -/* - * The following structure defines the set of information saved - * on the current stack by RTEMS upon receipt of each interrupt - * that will lead to re-enter the kernel to signal the thread. - */ - -typedef CPU_Exception_frame CPU_Interrupt_frame; - -typedef enum { - DIVIDE_BY_ZERO = 0, - DEBUG = 1, - NMI = 2, - BREAKPOINT = 3, - OVERFLOW = 4, - BOUND = 5, - ILLEGAL_INSTR = 6, - MATH_COPROC_UNAVAIL = 7, - DOUBLE_FAULT = 8, - I386_COPROC_SEG_ERR = 9, - INVALID_TSS = 10, - SEGMENT_NOT_PRESENT = 11, - STACK_SEGMENT_FAULT = 12, - GENERAL_PROT_ERR = 13, - PAGE_FAULT = 14, - INTEL_RES15 = 15, - FLOAT_ERROR = 16, - ALIGN_CHECK = 17, - MACHINE_CHECK = 18 -} Intel_symbolic_exception_name; - - -/* - * The following table contains the information required to configure - * the i386 specific parameters. - */ - -typedef struct { - void (*pretasking_hook)( void ); - void (*predriver_hook)( void ); - void (*postdriver_hook)( void ); - void (*idle_task)( void ); - boolean do_zero_of_workspace; - unsigned32 idle_task_stack_size; - unsigned32 interrupt_stack_size; - unsigned32 extra_mpci_receive_server_stack; - void * (*stack_allocate_hook)( unsigned32 ); - void (*stack_free_hook)( void* ); - /* end of fields required on all CPUs */ - - unsigned32 interrupt_table_segment; - void *interrupt_table_offset; -} rtems_cpu_table; - -/* - * context size area for floating point - * - * NOTE: This is out of place on the i386 to avoid a forward reference. - */ - -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) - -/* variables */ - -SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context; -SCORE_EXTERN void *_CPU_Interrupt_stack_low; -SCORE_EXTERN void *_CPU_Interrupt_stack_high; - -/* constants */ - -/* - * This defines the number of levels and the mask used to pick those - * bits out of a thread mode. - */ - -#define CPU_MODES_INTERRUPT_LEVEL 0x00000001 /* interrupt level in mode */ -#define CPU_MODES_INTERRUPT_MASK 0x00000001 /* interrupt level in mode */ - -/* - * extra stack required by the MPCI receive server thread - */ - -#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 1024 - -/* - * i386 family supports 256 distinct vectors. - */ - -#define CPU_INTERRUPT_NUMBER_OF_VECTORS 256 -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) - -/* - * Minimum size of a thread's stack. - */ - -#define CPU_STACK_MINIMUM_SIZE 1024 - -/* - * i386 is pretty tolerant of alignment. Just put things on 4 byte boundaries. - */ - -#define CPU_ALIGNMENT 4 -#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT -#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT - -/* - * On i386 thread stacks require no further alignment after allocation - * from the Workspace. - */ - -#define CPU_STACK_ALIGNMENT 0 - -/* macros */ - -/* - * ISR handler macros - * - * These macros perform the following functions: - * + disable all maskable CPU interrupts - * + restore previous interrupt level (enable) - * + temporarily restore interrupts (flash) - * + set a particular level - */ - -#define _CPU_ISR_Disable( _level ) i386_disable_interrupts( _level ) - -#define _CPU_ISR_Enable( _level ) i386_enable_interrupts( _level ) - -#define _CPU_ISR_Flash( _level ) i386_flash_interrupts( _level ) - -#define _CPU_ISR_Set_level( _new_level ) \ - { \ - if ( _new_level ) asm volatile ( "cli" ); \ - else asm volatile ( "sti" ); \ - } - -unsigned32 _CPU_ISR_Get_level( void ); - -/* end of ISR handler macros */ - -/* - * Context handler macros - * - * These macros perform the following functions: - * + initialize a context area - * + restart the current thread - * + calculate the initial pointer into a FP context area - * + initialize an FP context area - */ - -#define CPU_EFLAGS_INTERRUPTS_ON 0x00003202 -#define CPU_EFLAGS_INTERRUPTS_OFF 0x00003002 - -#define _CPU_Context_Initialize( _the_context, _stack_base, _size, \ - _isr, _entry_point, _is_fp ) \ - do { \ - unsigned32 _stack; \ - \ - if ( (_isr) ) (_the_context)->eflags = CPU_EFLAGS_INTERRUPTS_OFF; \ - else (_the_context)->eflags = CPU_EFLAGS_INTERRUPTS_ON; \ - \ - _stack = ((unsigned32)(_stack_base)) + (_size) - 4; \ - \ - *((proc_ptr *)(_stack)) = (_entry_point); \ - (_the_context)->ebp = (void *) _stack; \ - (_the_context)->esp = (void *) _stack; \ - } while (0) - -#define _CPU_Context_Restart_self( _the_context ) \ - _CPU_Context_restore( (_the_context) ); - -#define _CPU_Context_Fp_start( _base, _offset ) \ - ( (void *) _Addresses_Add_offset( (_base), (_offset) ) ) - -#define _CPU_Context_Initialize_fp( _fp_area ) \ - { \ - unsigned32 *_source = (unsigned32 *) &_CPU_Null_fp_context; \ - unsigned32 *_destination = *(_fp_area); \ - unsigned32 _index; \ - \ - for ( _index=0 ; _index < CPU_CONTEXT_FP_SIZE/4 ; _index++ ) \ - *_destination++ = *_source++; \ - } - -/* end of Context handler macros */ - -/* - * Fatal Error manager macros - * - * These macros perform the following functions: - * + disable interrupts and halt the CPU - */ - -#define _CPU_Fatal_halt( _error ) \ - { \ - asm volatile ( "cli ; \ - movl %0,%%eax ; \ - hlt" \ - : "=r" ((_error)) : "0" ((_error)) \ - ); \ - } - -/* end of Fatal Error manager macros */ - -/* - * Bitfield handler macros - * - * These macros perform the following functions: - * + scan for the highest numbered (MSB) set in a 16 bit bitfield - */ - -#define CPU_USE_GENERIC_BITFIELD_CODE FALSE -#define CPU_USE_GENERIC_BITFIELD_DATA FALSE - -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - { \ - register unsigned16 __value_in_register = (_value); \ - \ - _output = 0; \ - \ - asm volatile ( "bsfw %0,%1 " \ - : "=r" (__value_in_register), "=r" (_output) \ - : "0" (__value_in_register), "1" (_output) \ - ); \ - } - -/* end of Bitfield handler macros */ - -/* - * Priority handler macros - * - * These macros perform the following functions: - * + return a mask with the bit for this major/minor portion of - * of thread priority set. - * + translate the bit number returned by "Bitfield_find_first_bit" - * into an index into the thread ready chain bit maps - */ - -#define _CPU_Priority_Mask( _bit_number ) \ - ( 1 << (_bit_number) ) - -#define _CPU_Priority_bits_index( _priority ) \ - (_priority) - -/* functions */ - -/* - * _CPU_Initialize - * - * This routine performs CPU dependent initialization. - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) -); - -/* - * _CPU_ISR_install_raw_handler - * - * This routine installs a "raw" interrupt handler directly into the - * processor's vector table. - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_ISR_install_vector - * - * This routine installs an interrupt vector. - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_Thread_Idle_body - * - * Use the halt instruction of low power mode of a particular i386 model. - */ - -#if (CPU_PROVIDES_IDLE_THREAD_BODY == TRUE) - -void _CPU_Thread_Idle_body( void ); - -#endif /* CPU_PROVIDES_IDLE_THREAD_BODY */ - -/* - * _CPU_Context_switch - * - * This routine switches from the run context to the heir context. - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/* - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner and avoid stack conflicts. - */ - -void _CPU_Context_restore( - Context_Control *new_context -); - -/* - * _CPU_Context_save_fp - * - * This routine saves the floating point context passed to it. - */ - -void _CPU_Context_save_fp( - void **fp_context_ptr -); - -/* - * _CPU_Context_restore_fp - * - * This routine restores the floating point context passed to it. - */ - -void _CPU_Context_restore_fp( - void **fp_context_ptr -); - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/i386/cpu_asm.s b/c/src/exec/score/cpu/i386/cpu_asm.s deleted file mode 100644 index 16d0a7c205..0000000000 --- a/c/src/exec/score/cpu/i386/cpu_asm.s +++ /dev/null @@ -1,281 +0,0 @@ -/* cpu_asm.s - * - * This file contains all assembly code for the Intel i386 implementation - * of RTEMS. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <asm.h> - -/* - * Format of i386 Register structure - */ - -.set REG_EFLAGS, 0 -.set REG_ESP, REG_EFLAGS + 4 -.set REG_EBP, REG_ESP + 4 -.set REG_EBX, REG_EBP + 4 -.set REG_ESI, REG_EBX + 4 -.set REG_EDI, REG_ESI + 4 -.set SIZE_REGS, REG_EDI + 4 - - BEGIN_CODE - -/* - * void _CPU_Context_switch( run_context, heir_context ) - * - * This routine performs a normal non-FP context. - */ - - .p2align 1 - PUBLIC (_CPU_Context_switch) - -.set RUNCONTEXT_ARG, 4 # save context argument -.set HEIRCONTEXT_ARG, 8 # restore context argument - -SYM (_CPU_Context_switch): - movl RUNCONTEXT_ARG(esp),eax # eax = running threads context - pushf # push eflags - popl REG_EFLAGS(eax) # save eflags - movl esp,REG_ESP(eax) # save stack pointer - movl ebp,REG_EBP(eax) # save base pointer - movl ebx,REG_EBX(eax) # save ebx - movl esi,REG_ESI(eax) # save source register - movl edi,REG_EDI(eax) # save destination register - - movl HEIRCONTEXT_ARG(esp),eax # eax = heir threads context - -restore: - pushl REG_EFLAGS(eax) # push eflags - popf # restore eflags - movl REG_ESP(eax),esp # restore stack pointer - movl REG_EBP(eax),ebp # restore base pointer - movl REG_EBX(eax),ebx # restore ebx - movl REG_ESI(eax),esi # restore source register - movl REG_EDI(eax),edi # restore destination register - ret - -/* - * NOTE: May be unnecessary to reload some registers. - */ - -/* - * void _CPU_Context_restore( new_context ) - * - * This routine performs a normal non-FP context. - */ - - PUBLIC (_CPU_Context_restore) - -.set NEWCONTEXT_ARG, 4 # context to restore argument - -SYM (_CPU_Context_restore): - - movl NEWCONTEXT_ARG(esp),eax # eax = running threads context - jmp restore - -/*PAGE - * void _CPU_Context_save_fp_context( &fp_context_ptr ) - * void _CPU_Context_restore_fp_context( &fp_context_ptr ) - * - * This section is used to context switch an i80287, i80387, - * the built-in coprocessor or the i80486 or compatible. - */ - -.set FPCONTEXT_ARG, 4 # FP context argument - - .p2align 1 - PUBLIC (_CPU_Context_save_fp) -SYM (_CPU_Context_save_fp): - movl FPCONTEXT_ARG(esp),eax # eax = &ptr to FP context area - movl (eax),eax # eax = FP context area - fsave (eax) # save FP context - ret - - .p2align 1 - PUBLIC (_CPU_Context_restore_fp) -SYM (_CPU_Context_restore_fp): - movl FPCONTEXT_ARG(esp),eax # eax = &ptr to FP context area - movl (eax),eax # eax = FP context area - frstor (eax) # restore FP context - ret - -SYM (_Exception_Handler): - pusha # Push general purpose registers - pushl esp # Push exception frame address - movl _currentExcHandler, eax # Call function storead in _currentExcHandler - call * eax - addl $4, esp - popa # restore general purpose registers - addl $8, esp # skill vector number and faultCode - iret - -#define DISTINCT_EXCEPTION_WITH_FAULTCODE_ENTRY(_vector) \ - .p2align 4 ; \ - PUBLIC (rtems_exception_prologue_ ## _vector ) ; \ -SYM (rtems_exception_prologue_ ## _vector ): \ - pushl $ _vector ; \ - jmp SYM (_Exception_Handler) ; - -#define DISTINCT_EXCEPTION_WITHOUT_FAULTCODE_ENTRY(_vector) \ - .p2align 4 ; \ - PUBLIC (rtems_exception_prologue_ ## _vector ) ; \ -SYM (rtems_exception_prologue_ ## _vector ): \ - pushl $ 0 ; \ - pushl $ _vector ; \ - jmp SYM (_Exception_Handler) ; - -/* - * Divide Error - */ -DISTINCT_EXCEPTION_WITHOUT_FAULTCODE_ENTRY (0) -/* - * Debug Exception - */ -DISTINCT_EXCEPTION_WITHOUT_FAULTCODE_ENTRY (1) -/* - * NMI - */ -DISTINCT_EXCEPTION_WITHOUT_FAULTCODE_ENTRY (2) -/* - * Breakpoint - */ -DISTINCT_EXCEPTION_WITHOUT_FAULTCODE_ENTRY (3) -/* - * Overflow - */ -DISTINCT_EXCEPTION_WITHOUT_FAULTCODE_ENTRY (4) -/* - * Bound Range Exceeded - */ -DISTINCT_EXCEPTION_WITHOUT_FAULTCODE_ENTRY (5) -/* - * Invalid Opcode - */ -DISTINCT_EXCEPTION_WITHOUT_FAULTCODE_ENTRY (6) -/* - * No Math Coproc - */ -DISTINCT_EXCEPTION_WITHOUT_FAULTCODE_ENTRY (7) -/* - * Double Fault - */ -DISTINCT_EXCEPTION_WITH_FAULTCODE_ENTRY (8) -/* - * Coprocessor segment overrun - */ -DISTINCT_EXCEPTION_WITHOUT_FAULTCODE_ENTRY (9) -/* - * Invalid TSS - */ -DISTINCT_EXCEPTION_WITH_FAULTCODE_ENTRY (10) -/* - * Segment Not Present - */ -DISTINCT_EXCEPTION_WITH_FAULTCODE_ENTRY (11) -/* - * Stack segment Fault - */ -DISTINCT_EXCEPTION_WITH_FAULTCODE_ENTRY (12) -/* - * General Protection Fault - */ -DISTINCT_EXCEPTION_WITH_FAULTCODE_ENTRY (13) -/* - * Page Fault - */ -DISTINCT_EXCEPTION_WITH_FAULTCODE_ENTRY (14) -/* - * Floating point error (NB 15 is reserved it is therefor skipped) - */ -DISTINCT_EXCEPTION_WITHOUT_FAULTCODE_ENTRY (16) -/* - * Aligment Check - */ -DISTINCT_EXCEPTION_WITH_FAULTCODE_ENTRY (17) -/* - * Machine Check - */ -DISTINCT_EXCEPTION_WITH_FAULTCODE_ENTRY (18) - - -/* - * GO32 does not require these segment related routines. - */ - -#ifndef __GO32__ - -/* - * void *i386_Logical_to_physical( - * rtems_unsigned16 segment, - * void *address - * ); - * - * Returns thirty-two bit physical address for segment:address. - */ - -.set SEGMENT_ARG, 4 -.set ADDRESS_ARG, 8 - - PUBLIC (i386_Logical_to_physical) - -SYM (i386_Logical_to_physical): - - xorl eax,eax # clear eax - movzwl SEGMENT_ARG(esp),ecx # ecx = segment value - movl $ SYM (_Global_descriptor_table),edx - # edx = address of our GDT - addl ecx,edx # edx = address of desired entry - movb 7(edx),ah # ah = base 31:24 - movb 4(edx),al # al = base 23:16 - shll $16,eax # move ax into correct bits - movw 2(edx),ax # ax = base 0:15 - movl ADDRESS_ARG(esp),ecx # ecx = address to convert - addl eax,ecx # ecx = physical address equivalent - movl ecx,eax # eax = ecx - ret - -/* - * void *i386_Physical_to_logical( - * rtems_unsigned16 segment, - * void *address - * ); - * - * Returns thirty-two bit physical address for segment:address. - */ - -/* - *.set SEGMENT_ARG, 4 - *.set ADDRESS_ARG, 8 -- use sets from above - */ - - PUBLIC (i386_Physical_to_logical) - -SYM (i386_Physical_to_logical): - xorl eax,eax # clear eax - movzwl SEGMENT_ARG(esp),ecx # ecx = segment value - movl $ SYM (_Global_descriptor_table),edx - # edx = address of our GDT - addl ecx,edx # edx = address of desired entry - movb 7(edx),ah # ah = base 31:24 - movb 4(edx),al # al = base 23:16 - shll $16,eax # move ax into correct bits - movw 2(edx),ax # ax = base 0:15 - movl ADDRESS_ARG(esp),ecx # ecx = address to convert - subl eax,ecx # ecx = logical address equivalent - movl ecx,eax # eax = ecx - ret -#endif /* __GO32__ */ - -END_CODE - -END diff --git a/c/src/exec/score/cpu/i386/i386.h b/c/src/exec/score/cpu/i386/i386.h deleted file mode 100644 index 0eb936a6f7..0000000000 --- a/c/src/exec/score/cpu/i386/i386.h +++ /dev/null @@ -1,191 +0,0 @@ -/* i386.h - * - * This include file contains information pertaining to the Intel - * i386 processor. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __i386_h -#define __i386_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section contains the information required to build - * RTEMS for a particular member of the Intel i386 - * family when executing in protected mode. It does - * this by setting variables to indicate which implementation - * dependent features are present in a particular member - * of the family. - * - * Currently recognized: - * i386_fp (i386 DX or SX w/i387) - * i386_nofp (i386 DX or SX w/o i387) - * i486dx - * i486sx - * pentium - * - * CPU Model Feature Flags: - * - * I386_HAS_BSWAP: Defined to "1" if the instruction for endian swapping - * (bswap) should be used. This instruction appears to - * be present in all i486's and above. - * - * I386_HAS_FPU: Defined to "1" if the CPU has an FPU. - * - */ - -#if defined(i386_fp) - -#define CPU_MODEL_NAME "i386 with i387" -#define I386_HAS_BSWAP 0 - -#elif defined(i386_nofp) - -#define CPU_MODEL_NAME "i386 w/o i387" -#define I386_HAS_FPU 0 -#define I386_HAS_BSWAP 0 - -#elif defined(i486dx) - -#define CPU_MODEL_NAME "i486dx" - -#elif defined(i486sx) - -#define CPU_MODEL_NAME "i486sx" -#define I386_HAS_FPU 0 - -#elif defined(pentium) - -#define CPU_MODEL_NAME "Pentium" - -#else - -#error "Unsupported CPU Model" - -#endif - -/* - * Set default values for CPU model feature flags - * - * NOTE: These settings are chosen to reflect most of the family members. - */ - -#ifndef I386_HAS_FPU -#define I386_HAS_FPU 1 -#endif - -#ifndef I386_HAS_BSWAP -#define I386_HAS_BSWAP 1 -#endif - -/* - * Define the name of the CPU family. - */ - -#define CPU_NAME "Intel i386" - -#ifndef ASM - -/* - * The following routine swaps the endian format of an unsigned int. - * It must be static so it can be referenced indirectly. - */ - -static inline unsigned int i386_swap_U32( - unsigned int value -) -{ - unsigned long lout; - -#if (I386_HAS_BSWAP == 0) - asm volatile( "rorw $8,%%ax;" - "rorl $16,%0;" - "rorw $8,%%ax" : "=a" (lout) : "0" (value) ); -#else - __asm__ volatile( "bswap %0" : "=r" (lout) : "0" (value)); -#endif - return( lout ); -} - -static inline unsigned int i386_swap_U16( - unsigned int value -) -{ - unsigned short sout; - - __asm__ volatile( "rorw $8,%0" : "=r" (sout) : "0" (value)); - return (sout); -} - - -/* routines */ - -/* - * i386_Logical_to_physical - * - * Converts logical address to physical address. - */ - -void *i386_Logical_to_physical( - unsigned short segment, - void *address -); - -/* - * i386_Physical_to_logical - * - * Converts physical address to logical address. - */ - -void *i386_Physical_to_logical( - unsigned short segment, - void *address -); - - -/* - * "Simpler" names for a lot of the things defined in this file - */ - -/* segment access routines */ - -#define get_cs() i386_get_cs() -#define get_ds() i386_get_ds() -#define get_es() i386_get_es() -#define get_ss() i386_get_ss() -#define get_fs() i386_get_fs() -#define get_gs() i386_get_gs() - -#define CPU_swap_u32( _value ) i386_swap_U32( _value ) -#define CPU_swap_u16( _value ) i386_swap_U16( _value ) - -/* i80x86 I/O instructions */ - -#define outport_byte( _port, _value ) i386_outport_byte( _port, _value ) -#define outport_word( _port, _value ) i386_outport_word( _port, _value ) -#define outport_long( _port, _value ) i386_outport_long( _port, _value ) -#define inport_byte( _port, _value ) i386_inport_byte( _port, _value ) -#define inport_word( _port, _value ) i386_inport_word( _port, _value ) -#define inport_long( _port, _value ) i386_inport_long( _port, _value ) - - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/i386/i386types.h b/c/src/exec/score/cpu/i386/i386types.h deleted file mode 100644 index 7d2a8a1f4f..0000000000 --- a/c/src/exec/score/cpu/i386/i386types.h +++ /dev/null @@ -1,58 +0,0 @@ -/* i386types.h - * - * This include file contains type definitions pertaining to the Intel - * i386 processor family. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __i386_TYPES_h -#define __i386_TYPES_h - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section defines the basic types for this processor. - */ - -typedef unsigned char unsigned8; /* unsigned 8-bit integer */ -typedef unsigned short unsigned16; /* unsigned 16-bit integer */ -typedef unsigned int unsigned32; /* unsigned 32-bit integer */ -typedef unsigned long long unsigned64; /* unsigned 64-bit integer */ - -typedef unsigned16 Priority_Bit_map_control; - -typedef signed char signed8; /* 8-bit signed integer */ -typedef signed short signed16; /* 16-bit signed integer */ -typedef signed int signed32; /* 32-bit signed integer */ -typedef signed long long signed64; /* 64 bit signed integer */ - -typedef unsigned32 boolean; /* Boolean value */ - -typedef float single_precision; /* single precision float */ -typedef double double_precision; /* double precision float */ - -typedef void i386_isr; - -typedef i386_isr ( *i386_isr_entry )( void ); - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/i386/rtems.s b/c/src/exec/score/cpu/i386/rtems.s deleted file mode 100644 index ac2822b7fd..0000000000 --- a/c/src/exec/score/cpu/i386/rtems.s +++ /dev/null @@ -1,31 +0,0 @@ -/* rtems.s - * - * This file contains the single entry point code for - * the i386 implementation of RTEMS. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <asm.h> - - EXTERN (_Entry_points) - - BEGIN_CODE - - .align 2 - PUBLIC (RTEMS) - -SYM (RTEMS): - jmpl SYM (_Entry_points)(,eax,4) - - END_CODE - -END diff --git a/c/src/exec/score/cpu/i960/Makefile.in b/c/src/exec/score/cpu/i960/Makefile.in deleted file mode 100644 index 641de5b218..0000000000 --- a/c/src/exec/score/cpu/i960/Makefile.in +++ /dev/null @@ -1,80 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - -RELS=$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -C_PIECES=cpu -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) - -H_FILES=$(srcdir)/cpu.h $(srcdir)/i960.h $(srcdir)/i960types.h - -# H_FILES that get installed externally -EXTERNAL_H_FILES = $(srcdir)/asm.h - -# Assembly source names, if any, go here -- minus the .s -S_PIECES=cpu_asm rtems -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) - -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(ARCH)/rtems-cpu.rel: $(OBJS) - $(make-rel) - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(RELS) - -# Install the program(s), appending _g or _p as appropriate. -# for include files, just use $(INSTALL) -install: all - -preinstall: $(ARCH) \ - $(PROJECT_INCLUDE)/rtems/score/targopts.h \ - ${PROJECT_RELEASE}/lib/bsp_specs - $(INSTALL) -m 444 ${H_FILES} $(PROJECT_INCLUDE)/rtems/score -# we will share the basic cpu file - $(INSTALL) -m 444 ${EXTERNAL_H_FILES} $(PROJECT_INCLUDE) - -$(PROJECT_INCLUDE)/rtems/score/targopts.h: $(ARCH)/targopts.h-tmp - $(INSTALL) -m 444 $(ARCH)/targopts.h-tmp $@ - -# $(ARCH)/targopts.h-tmp rule is in leaf.cfg - -${PROJECT_RELEASE}/lib/bsp_specs: $(ARCH)/bsp_specs.tmp - $(INSTALL) -m 444 $(ARCH)/bsp_specs.tmp $@ - -# $(ARCH)/bsp_specs.tmp rule is in leaf.cfg diff --git a/c/src/exec/score/cpu/i960/asm.h b/c/src/exec/score/cpu/i960/asm.h deleted file mode 100644 index a9a0788925..0000000000 --- a/c/src/exec/score/cpu/i960/asm.h +++ /dev/null @@ -1,110 +0,0 @@ -/* asm.h - * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. - * - * - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - * - * COPYRIGHT: - * - * This file is based on similar code found in newlib available - * from ftp.cygnus.com. The file which was used had no copyright - * notice. This file is freely distributable as long as the source - * of the file is noted. This file is: - * - * COPYRIGHT (c) 1994-1997. - * On-Line Applications Research Corporation (OAR). - * - * $Id$ - */ - -#ifndef __i960_ASM_h -#define __i960_ASM_h - -/* - * Indicate we are in an assembly file and get the basic CPU definitions. - */ - -#ifndef ASM -#define ASM -#endif -#include <rtems/score/targopts.h> -#include <rtems/score/i960.h> - -/* - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. - */ - -#ifndef __USER_LABEL_PREFIX__ -#define __USER_LABEL_PREFIX__ _ -#endif - -#ifndef __REGISTER_PREFIX__ -#define __REGISTER_PREFIX__ -#endif - -/* ANSI concatenation macros. */ - -#define CONCAT1(a, b) CONCAT2(a, b) -#define CONCAT2(a, b) a ## b - -/* Use the right prefix for global labels. */ - -#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) - -/* Use the right prefix for registers. */ - -#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) - -#define g0 REG (g0) -#define g1 REG (g1) -#define g2 REG (g2) -#define g3 REG (g3) -#define g4 REG (g4) -#define g5 REG (g5) -#define g6 REG (g6) -#define g7 REG (g7) -#define g8 REG (g8) -#define g9 REG (g9) -#define g10 REG (g10) -#define g11 REG (g11) -#define g12 REG (g12) -#define g13 REG (g13) -#define g14 REG (g14) -#define g15 REG (g15) - -/* - * Define macros to handle section beginning and ends. - */ - - -#define BEGIN_CODE_DCL .text -#define END_CODE_DCL -#define BEGIN_DATA_DCL .data -#define END_DATA_DCL -#define BEGIN_CODE .text -#define END_CODE -#define BEGIN_DATA -#define END_DATA -#define BEGIN_BSS -#define END_BSS -#define END - -/* - * Following must be tailor for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. - */ - -#define PUBLIC(sym) .globl SYM (sym) -#define EXTERN(sym) .globl SYM (sym) - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/i960/cpu.c b/c/src/exec/score/cpu/i960/cpu.c deleted file mode 100644 index 7dbbb5828f..0000000000 --- a/c/src/exec/score/cpu/i960/cpu.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Intel i960CA Dependent Source - * - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#if defined(__i960CA__) || defined(__i960_CA__) || defined(__i960CA) -#else -#warning "*** ENTIRE FILE IMPLEMENTED & TESTED FOR CA ONLY ***" -#warning "*** THIS FILE WILL NOT COMPILE ON ANOTHER FAMILY MEMBER ***" -#endif - -#include <rtems/system.h> -#include <rtems/score/isr.h> - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: - * cpu_table - CPU table to initialize - * thread_dispatch - address of disptaching routine - * - * OUTPUT PARAMETERS: NONE - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) /* ignored on this CPU */ -) -{ - - _CPU_Table = *cpu_table; - -} - -/*PAGE - * - * _CPU_ISR_Get_level - */ - -unsigned32 _CPU_ISR_Get_level( void ) -{ - unsigned32 level; - - i960_get_interrupt_level( level ); - - return level; -} - -/*PAGE - * - * _CPU_ISR_install_raw_handler - */ - -#define _Is_vector_caching_enabled( _prcb ) \ - ((_prcb)->control_tbl->icon & 0x2000) - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - i960ca_PRCB *prcb = _CPU_Table.Prcb; - proc_ptr *cached_intr_tbl = NULL; - - /* The i80960CA does not support vectors 0-7. The first 9 entries - * in the Interrupt Table are used to manage pending interrupts. - * Thus vector 8, the first valid vector number, is actually in - * slot 9 in the table. - */ - - *old_handler = prcb->intr_tbl[ vector + 1 ]; - - prcb->intr_tbl[ vector + 1 ] = new_handler; - - if ( _Is_vector_caching_enabled( prcb ) ) - if ( (vector & 0xf) == 0x2 ) /* cacheable? */ - cached_intr_tbl[ vector >> 4 ] = new_handler; -} - -/*PAGE - * - * _CPU__ISR_install_vector - * - * Install the RTEMS vector wrapper in the CPU's interrupt table. - * - * Input parameters: - * vector - interrupt vector number - * old_handler - former ISR for this vector number - * new_handler - replacement ISR for this vector number - * - * Output parameters: NONE - * - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - proc_ptr ignored; - - *old_handler = _ISR_Vector_table[ vector ]; - - _CPU_ISR_install_raw_handler( vector, _ISR_Handler, &ignored ); - - _ISR_Vector_table[ vector ] = new_handler; -} - -/*PAGE - * - * _CPU_Install_interrupt_stack - */ - -#define soft_reset( prcb ) \ - { register i960ca_PRCB *_prcb = (prcb); \ - register unsigned32 *_next=0; \ - register unsigned32 _cmd = 0x30000; \ - asm volatile( "lda next,%1; \ - sysctl %0,%1,%2; \ - next: mov g0,g0" \ - : "=d" (_cmd), "=d" (_next), "=d" (_prcb) \ - : "0" (_cmd), "1" (_next), "2" (_prcb) ); \ - } - -void _CPU_Install_interrupt_stack( void ) -{ - i960ca_PRCB *prcb = _CPU_Table.Prcb; - unsigned32 level; - - /* - * Set the Interrupt Stack in the PRCB and force a reload of it. - * Interrupts are disabled for safety. - */ - - _CPU_ISR_Disable( level ); - - prcb->intr_stack = _CPU_Interrupt_stack_low; - - soft_reset( prcb ); - - _CPU_ISR_Enable( level ); -} diff --git a/c/src/exec/score/cpu/i960/cpu.h b/c/src/exec/score/cpu/i960/cpu.h deleted file mode 100644 index 1deb8c08b4..0000000000 --- a/c/src/exec/score/cpu/i960/cpu.h +++ /dev/null @@ -1,468 +0,0 @@ -/* cpu.h - * - * This include file contains information pertaining to the Intel - * i960 processor family. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __CPU_h -#define __CPU_h - -#ifdef __cplusplus -extern "C" { -#endif - -#pragma align 4 /* for GNU C structure alignment */ - -#include <rtems/score/i960.h> /* pick up machine definitions */ -#ifndef ASM -#include <rtems/score/i960types.h> -#endif - -#define CPU_INLINE_ENABLE_DISPATCH FALSE -#define CPU_UNROLL_ENQUEUE_PRIORITY FALSE - -/* - * Use the i960's hardware interrupt stack support and have the - * interrupt manager allocate the memory for it. - */ - -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK FALSE -#define CPU_HAS_HARDWARE_INTERRUPT_STACK TRUE -#define CPU_ALLOCATE_INTERRUPT_STACK TRUE - -/* - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? - */ - -#define CPU_ISR_PASSES_FRAME_POINTER 0 - -/* - * Some family members have no FP (SA/KA/CA/CF), others have it built in - * (KB/MC/MX). There does not appear to be an external coprocessor - * for this family. - */ - -#if ( I960_HAS_FPU == 1 ) -#define CPU_HARDWARE_FP TRUE -#error "Floating point support for i960 family has been implemented!!!" -#else -#define CPU_HARDWARE_FP FALSE -#endif - -#define CPU_ALL_TASKS_ARE_FP FALSE -#define CPU_IDLE_TASK_IS_FP FALSE -#define CPU_USE_DEFERRED_FP_SWITCH TRUE - -#define CPU_PROVIDES_IDLE_THREAD_BODY FALSE -#define CPU_STACK_GROWS_UP TRUE -#define CPU_STRUCTURE_ALIGNMENT __attribute__ ((aligned (16))) - -/* - * Define what is required to specify how the network to host conversion - * routines are handled. - */ - -#define CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE -#define CPU_BIG_ENDIAN TRUE -#define CPU_LITTLE_ENDIAN FALSE - - -/* structures */ - -/* - * Basic integer context for the i960 family. - */ - -typedef struct { - void *r0_pfp; /* (r0) Previous Frame Pointer */ - void *r1_sp; /* (r1) Stack Pointer */ - unsigned32 pc; /* (pc) Processor Control */ - void *g8; /* (g8) Global Register 8 */ - void *g9; /* (g9) Global Register 9 */ - void *g10; /* (g10) Global Register 10 */ - void *g11; /* (g11) Global Register 11 */ - void *g12; /* (g12) Global Register 12 */ - void *g13; /* (g13) Global Register 13 */ - unsigned32 g14; /* (g14) Global Register 14 */ - void *g15_fp; /* (g15) Frame Pointer */ -} Context_Control; - -/* - * FP context save area for the i960 Numeric Extension - */ - -typedef struct { - unsigned32 fp0_1; /* (fp0) first word */ - unsigned32 fp0_2; /* (fp0) second word */ - unsigned32 fp0_3; /* (fp0) third word */ - unsigned32 fp1_1; /* (fp1) first word */ - unsigned32 fp1_2; /* (fp1) second word */ - unsigned32 fp1_3; /* (fp1) third word */ - unsigned32 fp2_1; /* (fp2) first word */ - unsigned32 fp2_2; /* (fp2) second word */ - unsigned32 fp2_3; /* (fp2) third word */ - unsigned32 fp3_1; /* (fp3) first word */ - unsigned32 fp3_2; /* (fp3) second word */ - unsigned32 fp3_3; /* (fp3) third word */ -} Context_Control_fp; - -/* - * The following structure defines the set of information saved - * on the current stack by RTEMS upon receipt of each interrupt. - */ - -typedef struct { - unsigned32 TBD; /* XXX Fix for this CPU */ -} CPU_Interrupt_frame; - -/* - * Call frame for the i960 family. - */ - -typedef struct { - void *r0_pfp; /* (r0) Previous Frame Pointer */ - void *r1_sp; /* (r1) Stack Pointer */ - void *r2_rip; /* (r2) Return Instruction Pointer */ - void *r3; /* (r3) Local Register 3 */ - void *r4; /* (r4) Local Register 4 */ - void *r5; /* (r5) Local Register 5 */ - void *r6; /* (r6) Local Register 6 */ - void *r7; /* (r7) Local Register 7 */ - void *r8; /* (r8) Local Register 8 */ - void *r9; /* (r9) Local Register 9 */ - void *r10; /* (r10) Local Register 10 */ - void *r11; /* (r11) Local Register 11 */ - void *r12; /* (r12) Local Register 12 */ - void *r13; /* (r13) Local Register 13 */ - void *r14; /* (r14) Local Register 14 */ - void *r15; /* (r15) Local Register 15 */ - /* XXX Looks like sometimes there is FP stuff here (MC manual)? */ -} CPU_Call_frame; - -/* - * The following table contains the information required to configure - * the i960 specific parameters. - */ - -typedef struct { - void (*pretasking_hook)( void ); - void (*predriver_hook)( void ); - void (*postdriver_hook)( void ); - void (*idle_task)( void ); - boolean do_zero_of_workspace; - unsigned32 idle_task_stack_size; - unsigned32 interrupt_stack_size; - unsigned32 extra_mpci_receive_server_stack; - void * (*stack_allocate_hook)( unsigned32 ); - void (*stack_free_hook)( void* ); - /* end of fields required on all CPUs */ - -#if defined(__i960CA__) || defined(__i960_CA__) || defined(__i960CA) - i960ca_PRCB *Prcb; -#endif -} rtems_cpu_table; - -/* variables */ - -SCORE_EXTERN void *_CPU_Interrupt_stack_low; -SCORE_EXTERN void *_CPU_Interrupt_stack_high; - -/* constants */ - -/* - * This defines the number of levels and the mask used to pick those - * bits out of a thread mode. - */ - -#define CPU_MODES_INTERRUPT_LEVEL 0x0000001f /* interrupt level in mode */ -#define CPU_MODES_INTERRUPT_MASK 0x0000001f /* interrupt level in mode */ - -/* - * context size area for floating point - */ - -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) - -/* - * extra stack required by the MPCI receive server thread - */ - -#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK (CPU_STACK_MINIMUM_SIZE) - -/* - * i960 family supports 256 distinct vectors. - */ - -#define CPU_INTERRUPT_NUMBER_OF_VECTORS 256 -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) - -/* - * Minimum size of a thread's stack. - * - * NOTE: See CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK - */ - -#define CPU_STACK_MINIMUM_SIZE 2048 - -/* - * i960 is pretty tolerant of alignment. Just put things on 4 byte boundaries. - */ - -#define CPU_ALIGNMENT 4 -#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT -#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT - -/* - * i960ca stack requires 16 byte alignment - * - * NOTE: This factor may need to be family member dependent. - */ - -#define CPU_STACK_ALIGNMENT 16 - -/* macros */ - -/* - * ISR handler macros - * - * These macros perform the following functions: - * + disable all maskable CPU interrupts - * + restore previous interrupt level (enable) - * + temporarily restore interrupts (flash) - * + set a particular level - */ - -#define _CPU_ISR_Disable( _level ) i960_disable_interrupts( _level ) -#define _CPU_ISR_Enable( _level ) i960_enable_interrupts( _level ) -#define _CPU_ISR_Flash( _level ) i960_flash_interrupts( _level ) - -#define _CPU_ISR_Set_level( newlevel ) \ - { \ - unsigned32 _mask = 0; \ - unsigned32 _level = (newlevel); \ - \ - __asm__ volatile ( "ldconst 0x1f0000,%0; \ - modpc 0,%0,%1" : "=d" (_mask), "=d" (_level) \ - : "0" (_mask), "1" (_level) \ - ); \ - } - -unsigned32 _CPU_ISR_Get_level( void ); - -/* ISR handler section macros */ - -/* - * Context handler macros - * - * These macros perform the following functions: - * + initialize a context area - * + restart the current thread - * + calculate the initial pointer into a FP context area - * + initialize an FP context area - */ - -#define _CPU_Context_Initialize( _the_context, _stack_base, _size, \ - _isr, _entry, _is_fp ) \ - { CPU_Call_frame *_texit_frame; \ - unsigned32 _mask; \ - unsigned32 _base_pc; \ - unsigned32 _stack_tmp; \ - void *_stack; \ - \ - _stack_tmp = (unsigned32)(_stack_base) + CPU_STACK_ALIGNMENT; \ - _stack_tmp &= ~(CPU_STACK_ALIGNMENT - 1); \ - _stack = (void *) _stack_tmp; \ - \ - __asm__ volatile ( "flushreg" : : ); /* flush register cache */ \ - \ - (_the_context)->r0_pfp = _stack; \ - (_the_context)->g15_fp = _stack + (1 * sizeof(CPU_Call_frame)); \ - (_the_context)->r1_sp = _stack + (2 * sizeof(CPU_Call_frame)); \ - __asm__ volatile ( "ldconst 0x1f0000,%0 ; " \ - "modpc 0,0,%1 ; " \ - "andnot %0,%1,%1 ; " \ - : "=d" (_mask), "=d" (_base_pc) : ); \ - (_the_context)->pc = _base_pc | ((_isr) << 16); \ - (_the_context)->g14 = 0; \ - \ - _texit_frame = (CPU_Call_frame *)_stack; \ - _texit_frame->r0_pfp = NULL; \ - _texit_frame->r1_sp = (_the_context)->g15_fp; \ - _texit_frame->r2_rip = (_entry); \ - } - -#define _CPU_Context_Restart_self( _the_context ) \ - _CPU_Context_restore( (_the_context) ); - -#define _CPU_Context_Fp_start( _base, _offset ) NULL - -#define _CPU_Context_Initialize_fp( _fp_area ) - -/* end of Context handler macros */ - -/* - * Fatal Error manager macros - * - * These macros perform the following functions: - * + disable interrupts and halt the CPU - */ - -#define _CPU_Fatal_halt( _errorcode ) \ - { unsigned32 _mask, _level; \ - unsigned32 _error = (_errorcode); \ - \ - __asm__ volatile ( "ldconst 0x1f0000,%0 ; \ - mov %0,%1 ; \ - modpc 0,%0,%1 ; \ - mov %2,g0 ; \ - self: b self " \ - : "=d" (_mask), "=d" (_level), "=d" (_error) : ); \ - } - -/* end of Fatal Error Manager macros */ - -/* - * Bitfield handler macros - * - * These macros perform the following functions: - * + scan for the highest numbered (MSB) set in a 16 bit bitfield - */ - -#define CPU_USE_GENERIC_BITFIELD_CODE FALSE -#define CPU_USE_GENERIC_BITFIELD_DATA FALSE - -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - { unsigned32 _search = (_value); \ - \ - (_output) = 0; /* to prevent warnings */ \ - __asm__ volatile ( "scanbit %0,%1 " \ - : "=d" (_search), "=d" (_output) \ - : "0" (_search), "1" (_output) ); \ - } - -/* end of Bitfield handler macros */ - -/* - * Priority handler macros - * - * These macros perform the following functions: - * + return a mask with the bit for this major/minor portion of - * of thread priority set. - * + translate the bit number returned by "Bitfield_find_first_bit" - * into an index into the thread ready chain bit maps - */ - -#define _CPU_Priority_Mask( _bit_number ) \ - ( 0x8000 >> (_bit_number) ) - -#define _CPU_Priority_bits_index( _priority ) \ - ( 15 - (_priority) ) - -/* end of Priority handler macros */ - -/* functions */ - -/* - * _CPU_Initialize - * - * This routine performs CPU dependent initialization. - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) -); - -/* - * _CPU_ISR_install_raw_handler - * - * This routine installs a "raw" interrupt handler directly into the - * processor's vector table. - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_ISR_install_vector - * - * This routine installs an interrupt vector. - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_Install_interrupt_stack - * - * This routine installs the hardware interrupt stack pointer. - */ - -void _CPU_Install_interrupt_stack( void ); - -/* - * _CPU_Context_switch - * - * This routine switches from the run context to the heir context. - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/* - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner and avoid stack conflicts. - */ - -void _CPU_Context_restore( - Context_Control *new_context -); - -/* - * _CPU_Context_save_fp - * - * This routine saves the floating point context passed to it. - */ - -void _CPU_Context_save_fp( - void **fp_context_ptr -); - -/* - * _CPU_Context_restore_fp - * - * This routine restores the floating point context passed to it. - */ - -void _CPU_Context_restore_fp( - void **fp_context_ptr -); - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/i960/cpu_asm.s b/c/src/exec/score/cpu/i960/cpu_asm.s deleted file mode 100644 index fbed8babd8..0000000000 --- a/c/src/exec/score/cpu/i960/cpu_asm.s +++ /dev/null @@ -1,199 +0,0 @@ -/* cpu_asm.s - * - * This file contains all assembly code for the i960CA implementation - * of RTEMS. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - - .text -/* - * Format of i960ca Register structure - */ - -.set REG_R0_PFP , 0 # (r0) Previous Frame Pointer -.set REG_R1_SP , REG_R0_PFP+4 # (r1) Stack Pointer -.set REG_PC , REG_R1_SP+4 # (pc) Processor Controls -.set REG_G8 , REG_PC+4 # (g8) Global Register 8 -.set REG_G9 , REG_G8+4 # (g9) Global Register 9 -.set REG_G10 , REG_G9+4 # (g10) Global Register 10 -.set REG_G11 , REG_G10+4 # (g11) Global Register 11 -.set REG_G12 , REG_G11+4 # (g12) Global Register 12 -.set REG_G13 , REG_G12+4 # (g13) Global Register 13 -.set REG_G14 , REG_G13+4 # (g14) Global Register 14 -.set REG_G15_FP , REG_G14+4 # (g15) Global Register 15 -.set SIZE_REGS , REG_G15_FP+4 # size of cpu_context_registers - # structure - -/* - * void _CPU_Context_switch( run_context, heir_context ) - * - * This routine performs a normal non-FP context. - */ - .align 4 - .globl __CPU_Context_switch - -__CPU_Context_switch: - modpc 0,0,g2 # get old intr level (PC) - st g2,REG_PC(g0) # save pc - stq g8,REG_G8(g0) # save g8-g11 - stq g12,REG_G12(g0) # save g12-g15 - stl pfp,REG_R0_PFP(g0) # save pfp, sp - -restore: flushreg # flush register cache - ldconst 0x001f0000,g2 # g2 = PC mask - ld REG_PC(g1),g3 # thread->Regs.pc = pc; - ldq REG_G12(g1),g12 # restore g12-g15 - ldl REG_R0_PFP(g1),pfp # restore pfp, sp - ldq REG_G8(g1),g8 # restore g8-g11 - modpc 0,g2,g3 # restore PC register - ret - -/* - * void _CPU_Context_restore( new_context ) - * - * This routine performs a normal non-FP context. - */ - - .globl __CPU_Context_restore -__CPU_Context_restore: - mov g0,g1 # g0 = _Thread_executing - b restore - -/*PAGE - * void _CPU_Context_save_fp_context( &fp_context_ptr ) - * void _CPU_Context_restore_fp_context( &fp_context_ptr ) - * - * There is currently no hardware floating point for the i960. - */ - - .globl __CPU_Context_save_fp - .globl __CPU_Context_restore_fp -__CPU_Context_save_fp: -__CPU_Context_restore_fp: -#if ( I960_HAS_FPU == 1 ) -#error "Floating point support for i960 family has been implemented!!!" -#endif - ret - -/*PAGE - * void __ISR_Handler() - * - * This routine provides the RTEMS interrupt management. - * - * Input parameters: NONE - * - * Output parameters: NONE - * - * NOTE: - * Upon entry, the supervisor stack will contain a stack frame - * back to the interrupted thread and the interrupt stack will contain - * an interrupt stack frame. If dispatching is enabled, this - * is the outer most interrupt, and (a context switch is necessary or - * the current thread has signals), then set up the supervisor stack to - * transfer control to the interrupt dispatcher. - */ - - .globl __ISR_Handler -__ISR_Handler: - #ldconst 1,r8 - #modpc 0,r8,r8 # enable tracing - - # r4 = &_Thread_Dispatch_disable_level - ld __Thread_Dispatch_disable_level,r4 - movl g0,r8 # save g0-g1 - - ld -16+8(fp),g0 # g0 = vector number - movl g2,r10 # save g2-g3 - - ld __ISR_Nest_level,r5 # r5 = &_Isr_nest_level - mov g14,r7 # save g14 - - lda 0,g14 # NOT Branch and Link - movl g4,r12 # save g4-g5 - - lda 1(r4),r4 # increment dispatch disable level - movl g6,r14 # save g6-g7 - - ld __ISR_Vector_table[g0*4],g1 # g1 = Users handler - addo 1,r5,r5 # increment ISR level - - st r4,__Thread_Dispatch_disable_level - # one ISR nest level deeper - subo 1,r4,r4 # decrement dispatch disable level - - st r5,__ISR_Nest_level # disable multitasking - subo 1,r5,r5 # decrement ISR nest level - - callx (g1) # invoke user ISR - - st r4,__Thread_Dispatch_disable_level - # unnest multitasking - st r5,__ISR_Nest_level # one less ISR nest level - cmpobne.f 0,r4,exit # If dispatch disabled, exit - ldl -16(fp),g0 # g0 = threads PC reg - # g1 = threads AC reg - ld __Context_Switch_necessary,r6 - # r6 = Is thread switch necessary? - bbs.f 13,g0,exit # not outer level, then exit - cmpobne.f 0,r6,bframe # Switch necessary? - - ld __ISR_Signals_to_thread_executing,g2 - # signals sent to Run_thread - # while in interrupt handler? - cmpobe.f 0,g2,exit # No, then exit - -bframe: mov 0,g2 - st g2,__ISR_Signals_to_thread_executing - - ldconst 0x1f0000,g2 # g2 = intr disable mask - mov g2,g3 # g3 = new intr level - modpc 0,g2,g3 # set new level - - andnot 7,pfp,r4 # r4 = pfp without ret type - flushreg # flush registers - # push _Isr_dispatch ret frame - # build ISF in r4-r6 - ldconst 64,g2 # g2 = size of stack frame - ld 4(r4),g3 # g3 = previous sp - addo g2,g3,r5 # r5 = _Isr_dispatch SP - lda __ISR_Dispatch,r6 # r6 = _Isr_dispatch entry - stt r4,(g3) # set _Isr_dispatch ret info - st g1,16(g3) # set r4 = AC for ISR disp - or 7,g3,pfp # pfp to _Isr_dispatch - -exit: mov r7,g14 # restore g14 - movq r8,g0 # restore g0-g3 - movq r12,g4 # restore g4-g7 - ret - - -/*PAGE - * - * void __ISR_Dispatch() - * - * Entry point from the outermost interrupt service routine exit. - * The current stack is the supervisor mode stack. - */ - -__ISR_Dispatch: - mov g14,r7 - mov 0,g14 - movq g0,r8 - movq g4,r12 - call __Thread_Dispatch - - ldconst -1,r5 # r5 = reload mask - modac r5,r4,r4 # restore threads AC register - mov r7,g14 - movq r8,g0 - movq r12,g4 - ret diff --git a/c/src/exec/score/cpu/i960/i960.h b/c/src/exec/score/cpu/i960/i960.h deleted file mode 100644 index 78260a5a57..0000000000 --- a/c/src/exec/score/cpu/i960/i960.h +++ /dev/null @@ -1,268 +0,0 @@ -/* i960.h - * - * This include file contains information pertaining to the Intel - * i960 processor family. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __i960_h -#define __i960_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This file contains the information required to build - * RTEMS for a particular member of the Intel i960 - * family. It does this by setting variables to indicate - * which implementation dependent features are present - * in a particular member of the family. - * - * NOTE: For now i960 is really the i960ca. eventually need - * to put in at least support for FPU. - */ - -#if defined(__i960CA__) - -#define CPU_MODEL_NAME "i960ca" -#define I960_HAS_FPU 0 - -#else - -#error "Unsupported CPU Model" - -#endif - -/* - * Define the name of the CPU family. - */ - -#define CPU_NAME "Intel i960" - -#ifndef ASM - -/* - * XXX should have an ifdef here and have stuff for the other - * XXX family members... - */ - -#if defined(__i960CA__) - -/* i960CA control structures */ - -/* Intel i960CA Control Table */ - -typedef struct { - /* Control Group 0 */ - unsigned int ipb0; /* IP breakpoint 0 */ - unsigned int ipb1; /* IP breakpoint 1 */ - unsigned int dab0; /* data address breakpoint 0 */ - unsigned int dab1; /* data address breakpoint 1 */ - /* Control Group 1 */ - unsigned int imap0; /* interrupt map 0 */ - unsigned int imap1; /* interrupt map 1 */ - unsigned int imap2; /* interrupt map 2 */ - unsigned int icon; /* interrupt control */ - /* Control Group 2 */ - unsigned int mcon0; /* memory region 0 configuration */ - unsigned int mcon1; /* memory region 1 configuration */ - unsigned int mcon2; /* memory region 2 configuration */ - unsigned int mcon3; /* memory region 3 configuration */ - /* Control Group 3 */ - unsigned int mcon4; /* memory region 4 configuration */ - unsigned int mcon5; /* memory region 5 configuration */ - unsigned int mcon6; /* memory region 6 configuration */ - unsigned int mcon7; /* memory region 7 configuration */ - /* Control Group 4 */ - unsigned int mcon8; /* memory region 8 configuration */ - unsigned int mcon9; /* memory region 9 configuration */ - unsigned int mcon10; /* memory region 10 configuration */ - unsigned int mcon11; /* memory region 11 configuration */ - /* Control Group 5 */ - unsigned int mcon12; /* memory region 12 configuration */ - unsigned int mcon13; /* memory region 13 configuration */ - unsigned int mcon14; /* memory region 14 configuration */ - unsigned int mcon15; /* memory region 15 configuration */ - /* Control Group 6 */ - unsigned int bpcon; /* breakpoint control */ - unsigned int tc; /* trace control */ - unsigned int bcon; /* bus configuration control */ - unsigned int reserved; /* reserved */ -} i960ca_control_table; - -/* Intel i960CA Processor Control Block */ - -typedef struct { - unsigned int *fault_tbl; /* fault table base address */ - i960ca_control_table - *control_tbl; /* control table base address */ - unsigned int initial_ac; /* AC register initial value */ - unsigned int fault_config; /* fault configuration word */ - void **intr_tbl; /* interrupt table base address */ - void *sys_proc_tbl; /* system procedure table - base address */ - unsigned int reserved; /* reserved */ - unsigned int *intr_stack; /* interrupt stack pointer */ - unsigned int ins_cache_cfg; /* instruction cache - configuration word */ - unsigned int reg_cache_cfg; /* register cache configuration word */ -} i960ca_PRCB; - -#endif - -/* - * Interrupt Level Routines - */ - -#define i960_disable_interrupts( oldlevel ) \ - { (oldlevel) = 0x1f0000; \ - asm volatile ( "modpc 0,%1,%1" \ - : "=d" ((oldlevel)) \ - : "0" ((oldlevel)) ); \ - } - -#define i960_enable_interrupts( oldlevel ) \ - { unsigned int _mask = 0x1f0000; \ - asm volatile ( "modpc 0,%0,%1" \ - : "=d" (_mask), "=d" ((oldlevel)) \ - : "0" (_mask), "1" ((oldlevel)) ); \ - } - -#define i960_flash_interrupts( oldlevel ) \ - { unsigned int _mask = 0x1f0000; \ - asm volatile ( "modpc 0,%0,%1 ; \ - mov %0,%1 ; \ - modpc 0,%0,%1" \ - : "=d" (_mask), "=d" ((oldlevel)) \ - : "0" (_mask), "1" ((oldlevel)) ); \ - } - -#define i960_get_interrupt_level( _level ) \ - { \ - i960_disable_interrupts( _level ); \ - i960_enable_interrupts( _level ); \ - (_level) = ((_level) & 0x1f0000) >> 16; \ - } while ( 0 ) - -#define i960_atomic_modify( mask, addr, prev ) \ - { register unsigned int _mask = (mask); \ - register unsigned int *_addr = (unsigned int *)(addr); \ - asm volatile( "atmod %0,%1,%1" \ - : "=d" (_addr), "=d" (_mask) \ - : "0" (_addr), "1" (_mask) ); \ - (prev) = _mask; \ - } - - -#define atomic_modify( _mask, _address, _previous ) \ - i960_atomic_modify( _mask, _address, _previous ) - -#define i960_enable_tracing() \ - { register unsigned int _pc = 0x1; \ - asm volatile( "modpc 0,%0,%0" : "=d" (_pc) : "0" (_pc) ); \ - } - -#define i960_unmask_intr( xint ) \ - { register unsigned int _mask= (1<<(xint)); \ - asm volatile( "or sf1,%0,sf1" : "=d" (_mask) : "0" (_mask) ); \ - } - -#define i960_mask_intr( xint ) \ - { register unsigned int _mask= (1<<(xint)); \ - asm volatile( "andnot %0,sf1,sf1" : "=d" (_mask) : "0" (_mask) ); \ - } - -#define i960_clear_intr( xint ) \ - { register unsigned int _xint=(xint); \ -asm volatile( "loop_til_cleared: clrbit %0,sf0,sf0 ; \ - bbs %0,sf0, loop_til_cleared" \ - : "=d" (_xint) : "0" (_xint) ); \ - } - -#define i960_reload_ctl_group( group ) \ - { register int _cmd = ((group)|0x400) ; \ - asm volatile( "sysctl %0,%0,%0" : "=d" (_cmd) : "0" (_cmd) ); \ - } - -#define i960_cause_intr( intr ) \ - { register int _intr = (intr); \ - asm volatile( "sysctl %0,%0,%0" : "=d" (_intr) : "0" (_intr) ); \ - } - -#define i960_soft_reset( prcb ) \ - { register i960ca_PRCB *_prcb = (prcb); \ - register unsigned int *_next=0; \ - register unsigned int _cmd = 0x30000; \ - asm volatile( "lda next,%1; \ - sysctl %0,%1,%2; \ - next: mov g0,g0" \ - : "=d" (_cmd), "=d" (_next), "=d" (_prcb) \ - : "0" (_cmd), "1" (_next), "2" (_prcb) ); \ - } - -static inline unsigned int i960_pend_intrs() -{ register unsigned int _intr=0; - asm volatile( "mov sf0,%0" : "=d" (_intr) : "0" (_intr) ); - return ( _intr ); -} - -static inline unsigned int i960_mask_intrs() -{ register unsigned int _intr=0; - asm volatile( "mov sf1,%0" : "=d" (_intr) : "0" (_intr) ); - return( _intr ); -} - -static inline unsigned int i960_get_fp() -{ register unsigned int _fp=0; - asm volatile( "mov fp,%0" : "=d" (_fp) : "0" (_fp) ); - return ( _fp ); -} - -/* - * The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. - * - * This version is based on code presented in Vol. 4, No. 4 of - * Insight 960. It is certainly something you wouldn't think - * of on your own. - */ - -static inline unsigned int CPU_swap_u32( - unsigned int value -) -{ - register unsigned int to_swap = value; - register unsigned int temp = 0xFF00FF00; - register unsigned int swapped = 0; - - /* to_swap swapped */ - asm volatile ( "rotate 16,%0,%2 ;" /* 0x12345678 0x56781234 */ - "modify %1,%0,%2 ;" /* 0x12345678 0x12785634 */ - "rotate 8,%2,%2" /* 0x12345678 0x78563412 */ - : "=r" (to_swap), "=r" (temp), "=r" (swapped) - : "0" (to_swap), "1" (temp), "2" (swapped) - ); - return( swapped ); -} - -#define CPU_swap_u16( value ) \ - (((value&0xff) << 8) | ((value >> 8)&0xff)) - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/i960/i960types.h b/c/src/exec/score/cpu/i960/i960types.h deleted file mode 100644 index dff4c95f83..0000000000 --- a/c/src/exec/score/cpu/i960/i960types.h +++ /dev/null @@ -1,58 +0,0 @@ -/* i960types.h - * - * This include file contains type definitions pertaining to the Intel - * i960 processor family. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __i960_TYPES_h -#define __i960_TYPES_h - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section defines the basic types for this processor. - */ - -typedef unsigned char unsigned8; /* unsigned 8-bit integer */ -typedef unsigned short unsigned16; /* unsigned 16-bit integer */ -typedef unsigned int unsigned32; /* unsigned 32-bit integer */ -typedef unsigned long long unsigned64; /* unsigned 64-bit integer */ - -typedef unsigned32 Priority_Bit_map_control; - -typedef signed char signed8; /* 8-bit signed integer */ -typedef signed short signed16; /* 16-bit signed integer */ -typedef signed int signed32; /* 32-bit signed integer */ -typedef signed long long signed64; /* 64 bit signed integer */ - -typedef unsigned32 boolean; /* Boolean value */ - -typedef float single_precision; /* single precision float */ -typedef double double_precision; /* double precision float */ - -typedef void i960_isr; - -typedef void ( *i960_isr_entry )( void ); - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/i960/rtems.s b/c/src/exec/score/cpu/i960/rtems.s deleted file mode 100644 index 37fb734436..0000000000 --- a/c/src/exec/score/cpu/i960/rtems.s +++ /dev/null @@ -1,25 +0,0 @@ -/* rtems.s - * - * This file contains the single entry point code for - * the i960 implementation of RTEMS. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - - .text - - .align 4 - .globl RTEMS - -RTEMS: - ld __Entry_points[g7*4],r4 - bx (r4) - diff --git a/c/src/exec/score/cpu/m68k/Makefile.in b/c/src/exec/score/cpu/m68k/Makefile.in deleted file mode 100644 index f273d69362..0000000000 --- a/c/src/exec/score/cpu/m68k/Makefile.in +++ /dev/null @@ -1,76 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - -RELS=$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -C_PIECES=cpu memcpy -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) - -H_FILES=$(srcdir)/cpu.h $(srcdir)/m68k.h $(srcdir)/m68ktypes.h - -# H_FILES that get installed externally -EXTERNAL_H_FILES = $(srcdir)/asm.h $(srcdir)/m68302.h $(srcdir)/m68360.h \ - $(srcdir)/qsm.h $(srcdir)/sim.h - -# Assembly source names, if any, go here -- minus the .s -S_PIECES=cpu_asm rtems -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) - -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(ARCH)/rtems-cpu.rel: $(OBJS) - $(make-rel) - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(RELS) - -preinstall: $(ARCH) $(PROJECT_INCLUDE)/rtems/score/targopts.h \ - ${PROJECT_RELEASE}/lib/bsp_specs - $(INSTALL) -m 444 ${H_FILES} $(PROJECT_INCLUDE)/rtems/score -# we will share the basic cpu file - $(INSTALL) -m 444 ${EXTERNAL_H_FILES} $(PROJECT_INCLUDE) - -$(PROJECT_INCLUDE)/rtems/score/targopts.h: $(ARCH)/targopts.h-tmp - $(INSTALL) -m 444 $(ARCH)/targopts.h-tmp $@ - -# $(ARCH)/targopts.h-tmp rule is in leaf.cfg - -${PROJECT_RELEASE}/lib/bsp_specs: $(ARCH)/bsp_specs.tmp - $(INSTALL) -m 444 $(ARCH)/bsp_specs.tmp $@ - -# $(ARCH)/bsp_specs.tmp rule is in leaf.cfg diff --git a/c/src/exec/score/cpu/m68k/asm.h b/c/src/exec/score/cpu/m68k/asm.h deleted file mode 100644 index 456b213cb2..0000000000 --- a/c/src/exec/score/cpu/m68k/asm.h +++ /dev/null @@ -1,144 +0,0 @@ -/* asm.h - * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. - * - * - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - * - * COPYRIGHT: - * - * This file is based on similar code found in newlib available - * from ftp.cygnus.com. The file which was used had no copyright - * notice. This file is freely distributable as long as the source - * of the file is noted. This file is: - * - * COPYRIGHT (c) 1994-1997. - * On-Line Applications Research Corporation (OAR). - * - * $Id$ - */ - -#ifndef __M68k_ASM_h -#define __M68k_ASM_h - -/* - * Indicate we are in an assembly file and get the basic CPU definitions. - */ - -#ifndef ASM -#define ASM -#endif -#include <rtems/score/targopts.h> -#include <rtems/score/cpu.h> - -/* - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. - */ - -#ifndef __USER_LABEL_PREFIX__ -#define __USER_LABEL_PREFIX__ _ -#endif - -#ifndef __REGISTER_PREFIX__ -#define __REGISTER_PREFIX__ -#endif - -/* ANSI concatenation macros. */ - -#define CONCAT1(a, b) CONCAT2(a, b) -#define CONCAT2(a, b) a ## b - -/* Use the right prefix for global labels. */ - -#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) - -/* Use the right prefix for registers. */ - -#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) - -#define d0 REG (d0) -#define d1 REG (d1) -#define d2 REG (d2) -#define d3 REG (d3) -#define d4 REG (d4) -#define d5 REG (d5) -#define d6 REG (d6) -#define d7 REG (d7) -#define a0 REG (a0) -#define a1 REG (a1) -#define a2 REG (a2) -#define a3 REG (a3) -#define a4 REG (a4) -#define a5 REG (a5) -#define a6 REG (a6) -#define a7 REG (a7) -#define sp REG (sp) - -#define msp REG (msp) -#define usp REG (usp) -#define isp REG (isp) -#define sr REG (sr) -#define vbr REG (vbr) -#define dfc REG (dfc) -#define sfc REG (sfc) - -/* mcf52xx special regs */ -#define cacr REG (cacr) -#define acr0 REG (acr0) -#define acr1 REG (acr1) -#define rambar0 REG (rambar0) -#define mbar REG (mbar) - - -#define fp0 REG (fp0) -#define fp1 REG (fp1) -#define fp2 REG (fp2) -#define fp3 REG (fp3) -#define fp4 REG (fp4) -#define fp5 REG (fp5) -#define fp6 REG (fp6) -#define fp7 REG (fp7) - -#define fpc REG (fpc) -#define fpi REG (fpi) -#define fps REG (fps) -#define fpsr REG (fpsr) - - -/* - * Define macros to handle section beginning and ends. - */ - - -#define BEGIN_CODE_DCL .text -#define END_CODE_DCL -#define BEGIN_DATA_DCL .data -#define END_DATA_DCL -#define BEGIN_CODE .text -#define END_CODE -#define BEGIN_DATA .data -#define END_DATA -#define BEGIN_BSS .bss -#define END_BSS -#define END - -/* - * Following must be tailor for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. - */ - -#define PUBLIC(sym) .globl SYM (sym) -#define EXTERN(sym) .globl SYM (sym) - -#endif -/* end of include file */ - - diff --git a/c/src/exec/score/cpu/m68k/cpu.c b/c/src/exec/score/cpu/m68k/cpu.c deleted file mode 100644 index e714933350..0000000000 --- a/c/src/exec/score/cpu/m68k/cpu.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Motorola MC68xxx Dependent Source - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/score/isr.h> - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: - * cpu_table - CPU table to initialize - * thread_dispatch - entry pointer to thread dispatcher - * - * OUTPUT PARAMETERS: NONE - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) /* ignored on this CPU */ -) -{ -#if ( M68K_HAS_VBR == 0 ) - /* fill the isr redirect table with the code to place the format/id - onto the stack */ - - unsigned32 slot; - - for (slot = 0; slot < CPU_INTERRUPT_NUMBER_OF_VECTORS; slot++) - { - _CPU_ISR_jump_table[slot].move_a7 = M68K_MOVE_A7; - _CPU_ISR_jump_table[slot].format_id = slot << 2; - _CPU_ISR_jump_table[slot].jmp = M68K_JMP; - _CPU_ISR_jump_table[slot].isr_handler = (unsigned32) 0xDEADDEAD; - } -#endif /* M68K_HAS_VBR */ - - _CPU_Table = *cpu_table; -} - -/*PAGE - * - * _CPU_ISR_Get_level - */ - -unsigned32 _CPU_ISR_Get_level( void ) -{ - unsigned32 level; - - m68k_get_interrupt_level( level ); - - return level; -} - -/*PAGE - * - * _CPU_ISR_install_raw_handler - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - proc_ptr *interrupt_table = NULL; - -#if (M68K_HAS_FPSP_PACKAGE == 1) - /* - * If this vector being installed is one related to FP, then the - * FPSP will install the handler itself and handle it completely - * with no intervention from RTEMS. - */ - - if (*_FPSP_install_raw_handler && - (*_FPSP_install_raw_handler)(vector, new_handler, *old_handler)) - return; -#endif - - - /* - * On CPU models without a VBR, it is necessary for there to be some - * header code for each ISR which saves a register, loads the vector - * number, and jumps to _ISR_Handler. - */ - - m68k_get_vbr( interrupt_table ); - *old_handler = interrupt_table[ vector ]; -#if ( M68K_HAS_VBR == 1 ) - interrupt_table[ vector ] = new_handler; -#else - _CPU_ISR_jump_table[vector].isr_handler = (unsigned32) new_handler; - interrupt_table[ vector ] = (proc_ptr) &_CPU_ISR_jump_table[vector]; -#endif /* M68K_HAS_VBR */ -} - -/*PAGE - * - * _CPU_ISR_install_vector - * - * This kernel routine installs the RTEMS handler for the - * specified vector. - * - * Input parameters: - * vector - interrupt vector number - * new_handler - replacement ISR for this vector number - * old_handler - former ISR for this vector number - * - * Output parameters: NONE - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - proc_ptr ignored; - - *old_handler = _ISR_Vector_table[ vector ]; - - _CPU_ISR_install_raw_handler( vector, _ISR_Handler, &ignored ); - - _ISR_Vector_table[ vector ] = new_handler; -} - - -/*PAGE - * - * _CPU_Install_interrupt_stack - */ - -void _CPU_Install_interrupt_stack( void ) -{ -#if ( M68K_HAS_SEPARATE_STACKS == 1 ) - void *isp = _CPU_Interrupt_stack_high; - - asm volatile ( "movec %0,%%isp" : "=r" (isp) : "0" (isp) ); -#endif -} - -#if ( M68K_HAS_BFFFO != 1 ) -/* - * Returns table for duplication of the BFFFO instruction (16 bits only) - */ -const unsigned char __BFFFOtable[256] = { - 8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4, - 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -}; -#endif - -/*PAGE - * - * The following code context switches the software FPU emulation - * code provided with GCC. - */ - -#if (CPU_SOFTWARE_FP == TRUE) -extern Context_Control_fp _fpCCR; - -void CPU_Context_save_fp (void **fp_context_ptr) -{ - Context_Control_fp *fp; - - fp = (Context_Control_fp *) *fp_context_ptr; - - *fp = _fpCCR; -} - -void CPU_Context_restore_fp (void **fp_context_ptr) -{ - Context_Control_fp *fp; - - fp = (Context_Control_fp *) *fp_context_ptr; - - _fpCCR = *fp; -} -#endif - diff --git a/c/src/exec/score/cpu/m68k/cpu.h b/c/src/exec/score/cpu/m68k/cpu.h deleted file mode 100644 index 743677a944..0000000000 --- a/c/src/exec/score/cpu/m68k/cpu.h +++ /dev/null @@ -1,647 +0,0 @@ -/* cpu.h - * - * This include file contains information pertaining to the Motorola - * m68xxx processor family. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __CPU_h -#define __CPU_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/score/m68k.h> /* pick up machine definitions */ -#ifndef ASM -#include <rtems/score/m68ktypes.h> -#endif - -/* conditional compilation parameters */ - -#define CPU_INLINE_ENABLE_DISPATCH TRUE -#define CPU_UNROLL_ENQUEUE_PRIORITY FALSE - -/* - * Use the m68k's hardware interrupt stack support and have the - * interrupt manager allocate the memory for it. - */ - -#if ( M68K_HAS_SEPARATE_STACKS == 1) -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK 0 -#define CPU_HAS_HARDWARE_INTERRUPT_STACK 1 -#else -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK 1 -#define CPU_HAS_HARDWARE_INTERRUPT_STACK 0 -#endif -#define CPU_ALLOCATE_INTERRUPT_STACK 1 - -/* - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? - */ - -#define CPU_ISR_PASSES_FRAME_POINTER 0 - -/* - * Some family members have no FP, some have an FPU such as the - * MC68881/MC68882 for the MC68020, others have it built in (MC68030, 040). - * - * NOTE: If on a CPU without hardware FP, then one can use software - * emulation. The gcc software FP emulation code has data which - * must be contexted switched on a per task basis. - */ - -#if ( M68K_HAS_FPU == 1 ) -#define CPU_HARDWARE_FP TRUE -#define CPU_SOFTWARE_FP FALSE -#else -#define CPU_HARDWARE_FP FALSE -#if defined(__GCC__) -#define CPU_SOFTWARE_FP TRUE -#else -#define CPU_SOFTWARE_FP FALSE -#endif -#endif - -/* - * All tasks are not by default floating point tasks on this CPU. - * The IDLE task does not have a floating point context on this CPU. - * It is safe to use the deferred floating point context switch - * algorithm on this CPU. - */ - -#define CPU_ALL_TASKS_ARE_FP FALSE -#define CPU_IDLE_TASK_IS_FP FALSE -#define CPU_USE_DEFERRED_FP_SWITCH TRUE - -#define CPU_PROVIDES_IDLE_THREAD_BODY FALSE -#define CPU_STACK_GROWS_UP FALSE -#define CPU_STRUCTURE_ALIGNMENT - -/* - * Define what is required to specify how the network to host conversion - * routines are handled. - */ - -#define CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE -#define CPU_BIG_ENDIAN TRUE -#define CPU_LITTLE_ENDIAN FALSE - -#ifndef ASM -/* structures */ - -/* - * Basic integer context for the m68k family. - */ - -typedef struct { - unsigned32 sr; /* (sr) status register */ - unsigned32 d2; /* (d2) data register 2 */ - unsigned32 d3; /* (d3) data register 3 */ - unsigned32 d4; /* (d4) data register 4 */ - unsigned32 d5; /* (d5) data register 5 */ - unsigned32 d6; /* (d6) data register 6 */ - unsigned32 d7; /* (d7) data register 7 */ - void *a2; /* (a2) address register 2 */ - void *a3; /* (a3) address register 3 */ - void *a4; /* (a4) address register 4 */ - void *a5; /* (a5) address register 5 */ - void *a6; /* (a6) address register 6 */ - void *a7_msp; /* (a7) master stack pointer */ -} Context_Control; - -/* - * Floating point context ares - */ - -#if (CPU_SOFTWARE_FP == TRUE) - -/* - * This is the same as gcc's view of the software FP condition code - * register _fpCCR. The implementation of the emulation code is - * in the gcc-VERSION/config/m68k directory. This structure is - * correct as of gcc 2.7.2.2. - */ - -typedef struct { - unsigned16 _exception_bits; - unsigned16 _trap_enable_bits; - unsigned16 _sticky_bits; - unsigned16 _rounding_mode; - unsigned16 _format; - unsigned16 _last_operation; - union { - float sf; - double df; - } _operand1; - union { - float sf; - double df; - } _operand2; -} Context_Control_fp; - -#else - -/* - * FP context save area for the M68881/M68882 numeric coprocessors. - */ - -typedef struct { - unsigned8 fp_save_area[332]; /* 216 bytes for FSAVE/FRESTORE */ - /* 96 bytes for FMOVEM FP0-7 */ - /* 12 bytes for FMOVEM CREGS */ - /* 4 bytes for non-null flag */ -} Context_Control_fp; -#endif - -/* - * The following structure defines the set of information saved - * on the current stack by RTEMS upon receipt of each interrupt. - */ - -typedef struct { - unsigned32 TBD; /* XXX Fix for this CPU */ -} CPU_Interrupt_frame; - -/* - * The following table contains the information required to configure - * the m68k specific parameters. - */ - -typedef struct { - void (*pretasking_hook)( void ); - void (*predriver_hook)( void ); - void (*postdriver_hook)( void ); - void (*idle_task)( void ); - boolean do_zero_of_workspace; - unsigned32 idle_task_stack_size; - unsigned32 interrupt_stack_size; - unsigned32 extra_mpci_receive_server_stack; - void * (*stack_allocate_hook)( unsigned32 ); - void (*stack_free_hook)( void* ); - /* end of fields required on all CPUs */ - - m68k_isr *interrupt_vector_table; -} rtems_cpu_table; - -/* variables */ - -SCORE_EXTERN void *_CPU_Interrupt_stack_low; -SCORE_EXTERN void *_CPU_Interrupt_stack_high; - -extern char _VBR[]; - -#if ( M68K_HAS_VBR == 0 ) - -/* - * Table of ISR handler entries that resides in RAM. The FORMAT/ID is - * pushed onto the stack. This is not is the same order as VBR processors. - * The ISR handler takes the format and uses it for dispatching the user - * handler. - * - * FIXME : should be moved to below CPU_INTERRUPT_NUMBER_OF_VECTORS - * - */ - -typedef struct { - unsigned16 move_a7; /* move #FORMAT_ID,%a7@- */ - unsigned16 format_id; - unsigned16 jmp; /* jmp _ISR_Handlers */ - unsigned32 isr_handler; -} _CPU_ISR_handler_entry; - -#define M68K_MOVE_A7 0x3F3C -#define M68K_JMP 0x4EF9 - - /* points to jsr-exception-table in targets wo/ VBR register */ -SCORE_EXTERN _CPU_ISR_handler_entry _CPU_ISR_jump_table[256]; - -#endif /* M68K_HAS_VBR */ -#endif /* ASM */ - -/* constants */ - -/* - * This defines the number of levels and the mask used to pick those - * bits out of a thread mode. - */ - -#define CPU_MODES_INTERRUPT_LEVEL 0x00000007 /* interrupt level in mode */ -#define CPU_MODES_INTERRUPT_MASK 0x00000007 /* interrupt level in mode */ - -/* - * context size area for floating point - */ - -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) - -/* - * extra stack required by the MPCI receive server thread - */ - -#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 1024 - -/* - * m68k family supports 256 distinct vectors. - */ - -#define CPU_INTERRUPT_NUMBER_OF_VECTORS 256 -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) - -/* - * Minimum size of a thread's stack. - */ - -#define CPU_STACK_MINIMUM_SIZE 2048 - -/* - * m68k is pretty tolerant of alignment. Just put things on 4 byte boundaries. - */ - -#define CPU_ALIGNMENT 4 -#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT -#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT - -/* - * On m68k thread stacks require no further alignment after allocation - * from the Workspace. - */ - -#define CPU_STACK_ALIGNMENT 0 - -#ifndef ASM - -/* macros */ - -/* - * ISR handler macros - * - * These macros perform the following functions: - * + disable all maskable CPU interrupts - * + restore previous interrupt level (enable) - * + temporarily restore interrupts (flash) - * + set a particular level - */ - -#define _CPU_ISR_Disable( _level ) \ - m68k_disable_interrupts( _level ) - -#define _CPU_ISR_Enable( _level ) \ - m68k_enable_interrupts( _level ) - -#define _CPU_ISR_Flash( _level ) \ - m68k_flash_interrupts( _level ) - -#define _CPU_ISR_Set_level( _newlevel ) \ - m68k_set_interrupt_level( _newlevel ) - -unsigned32 _CPU_ISR_Get_level( void ); - -/* end of ISR handler macros */ - -/* - * Context handler macros - * - * These macros perform the following functions: - * + initialize a context area - * + restart the current thread - * + calculate the initial pointer into a FP context area - * + initialize an FP context area - */ - -#define _CPU_Context_Initialize( _the_context, _stack_base, _size, \ - _isr, _entry_point, _is_fp ) \ - do { \ - unsigned32 _stack; \ - \ - (_the_context)->sr = 0x3000 | ((_isr) << 8); \ - _stack = (unsigned32)(_stack_base) + (_size) - 4; \ - (_the_context)->a7_msp = (void *)_stack; \ - *(void **)_stack = (void *)(_entry_point); \ - } while ( 0 ) - -#define _CPU_Context_Restart_self( _the_context ) \ - { asm volatile( "movew %0,%%sr ; " \ - "moval %1,%%a7 ; " \ - "rts" \ - : "=d" ((_the_context)->sr), "=d" ((_the_context)->a7_msp) \ - : "0" ((_the_context)->sr), "1" ((_the_context)->a7_msp) ); \ - } - -/* - * Floating Point Context Area Support routines - */ - -#if (CPU_SOFTWARE_FP == TRUE) - -/* - * This software FP implementation is only for GCC. - */ - -#define _CPU_Context_Fp_start( _base, _offset ) \ - ((void *) _Addresses_Add_offset( (_base), (_offset) ) ) - - -#define _CPU_Context_Initialize_fp( _fp_area ) \ - { \ - Context_Control_fp *_fp; \ - _fp = *(Context_Control_fp **)_fp_area; \ - _fp->_exception_bits = 0; \ - _fp->_trap_enable_bits = 0; \ - _fp->_sticky_bits = 0; \ - _fp->_rounding_mode = 0; /* ROUND_TO_NEAREST */ \ - _fp->_format = 0; /* NIL */ \ - _fp->_last_operation = 0; /* NOOP */ \ - _fp->_operand1.df = 0; \ - _fp->_operand2.df = 0; \ - } -#else -#define _CPU_Context_Fp_start( _base, _offset ) \ - ((void *) \ - _Addresses_Add_offset( \ - (_base), \ - (_offset) + CPU_CONTEXT_FP_SIZE - 4 \ - ) \ - ) - -#define _CPU_Context_Initialize_fp( _fp_area ) \ - { unsigned32 *_fp_context = (unsigned32 *)*(_fp_area); \ - \ - *(--(_fp_context)) = 0; \ - *(_fp_area) = (unsigned8 *)(_fp_context); \ - } -#endif - -/* end of Context handler macros */ - -/* - * Fatal Error manager macros - * - * These macros perform the following functions: - * + disable interrupts and halt the CPU - */ - -#if ( M68K_COLDFIRE_ARCH == 1 ) -#define _CPU_Fatal_halt( _error ) \ - { asm volatile( "move.w %%sr,%%d0\n\t" \ - "or.l %2,%%d0\n\t" \ - "move.w %%d0,%%sr\n\t" \ - "move.l %1,%%d0\n\t" \ - "move.l #0xDEADBEEF,%%d1\n\t" \ - "halt" \ - : "=g" (_error) \ - : "0" (_error), "d"(0x0700) \ - : "d0", "d1" ); \ - } -#else -#define _CPU_Fatal_halt( _error ) \ - { asm volatile( "movl %0,%%d0; " \ - "orw #0x0700,%%sr; " \ - "stop #0x2700" : "=d" ((_error)) : "0" ((_error)) ); \ - } -#endif - -/* end of Fatal Error manager macros */ - -/* - * Bitfield handler macros - * - * These macros perform the following functions: - * + scan for the highest numbered (MSB) set in a 16 bit bitfield - * - * NOTE: - * - * It appears that on the M68020 bitfield are always 32 bits wide - * when in a register. This code forces the bitfield to be in - * memory (it really always is anyway). This allows us to - * have a real 16 bit wide bitfield which operates "correctly." - */ - -#define CPU_USE_GENERIC_BITFIELD_CODE FALSE -#define CPU_USE_GENERIC_BITFIELD_DATA FALSE - -#if ( M68K_HAS_BFFFO == 1 ) - -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - asm volatile( "bfffo (%1),#0,#16,%0" : "=d" (_output) : "a" (&_value)); -#else - -/* duplicates BFFFO results for 16 bits (i.e., 15-(_priority) in - _CPU_Priority_bits_index is not needed), handles the 0 case, and - does not molest _value -- jsg */ -#if ( M68K_COLDFIRE_ARCH == 1 ) -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - { \ - extern const unsigned char __BFFFOtable[256]; \ - register int dumby; \ - \ - asm volatile ( \ - " clr.l %1\n" \ - " move.w %2,%1\n" \ - " lsr.l #8,%1\n" \ - " beq.s 1f\n" \ - " move.b (%3,%1),%0\n" \ - " bra.s 0f\n" \ - "1: move.w %2,%1\n" \ - " move.b (%3,%1),%0\n" \ - " addq.l #8,%0\n" \ - "0: and.l #0xff,%0\n" \ - : "=&d" ((_output)), "=&d" ((dumby)) \ - : "d" ((_value)), "ao" ((__BFFFOtable)) \ - : "cc" ) ; \ - } -#elif ( M68K_HAS_EXTB_L == 1 ) -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - { \ - extern const unsigned char __BFFFOtable[256]; \ - register int dumby; \ - \ - asm volatile ( " move.w %2,%1\n" \ - " lsr.w #8,%1\n" \ - " beq.s 1f\n" \ - " move.b (%3,%1.w),%0\n" \ - " extb.l %0\n" \ - " bra.s 0f\n" \ - "1: moveq.l #8,%0\n" \ - " add.b (%3,%2.w),%0\n" \ - "0:\n" \ - : "=&d" ((_output)), "=&d" ((dumby)) \ - : "d" ((_value)), "ao" ((__BFFFOtable)) \ - : "cc" ) ; \ - } -#else -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - { \ - extern const unsigned char __BFFFOtable[256]; \ - register int dumby; \ - \ - asm volatile ( " move.w %2,%1\n" \ - " lsr.w #8,%1\n" \ - " beq.s 1f\n" \ - " move.b (%3,%1.w),%0\n" \ - " and.l #0x000000ff,%0\n"\ - " bra.s 0f\n" \ - "1: moveq.l #8,%0\n" \ - " add.b (%3,%2.w),%0\n" \ - "0:\n" \ - : "=&d" ((_output)), "=&d" ((dumby)) \ - : "d" ((_value)), "ao" ((__BFFFOtable)) \ - : "cc" ) ; \ - } -#endif - -#endif - -/* end of Bitfield handler macros */ - -/* - * Priority handler macros - * - * These macros perform the following functions: - * + return a mask with the bit for this major/minor portion of - * of thread priority set. - * + translate the bit number returned by "Bitfield_find_first_bit" - * into an index into the thread ready chain bit maps - */ - -#define _CPU_Priority_Mask( _bit_number ) \ - ( 0x8000 >> (_bit_number) ) - -#define _CPU_Priority_bits_index( _priority ) \ - (_priority) - -/* end of Priority handler macros */ - -/* functions */ - -/* - * _CPU_Initialize - * - * This routine performs CPU dependent initialization. - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) -); - -/* - * _CPU_ISR_install_raw_handler - * - * This routine installs a "raw" interrupt handler directly into the - * processor's vector table. - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_ISR_install_vector - * - * This routine installs an interrupt vector. - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_Install_interrupt_stack - * - * This routine installs the hardware interrupt stack pointer. - */ - -void _CPU_Install_interrupt_stack( void ); - -/* - * _CPU_Context_switch - * - * This routine switches from the run context to the heir context. - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/* - * _CPU_Context_save_fp - * - * This routine saves the floating point context passed to it. - */ - -void _CPU_Context_save_fp( - void **fp_context_ptr -); - -/* - * _CPU_Context_restore_fp - * - * This routine restores the floating point context passed to it. - */ - -void _CPU_Context_restore_fp( - void **fp_context_ptr -); - -#if (M68K_HAS_FPSP_PACKAGE == 1) -/* - * Hooks for the Floating Point Support Package (FPSP) provided by Motorola - * - * NOTES: - * - * Motorola 68k family CPU's before the 68040 used a coprocessor - * (68881 or 68882) to handle floating point. The 68040 has internal - * floating point support -- but *not* the complete support provided by - * the 68881 or 68882. The leftover functions are taken care of by the - * M68040 Floating Point Support Package. Quoting from the MC68040 - * Microprocessors User's Manual, Section 9, Floating-Point Unit (MC68040): - * - * "When used with the M68040FPSP, the MC68040 FPU is fully - * compliant with IEEE floating-point standards." - * - * M68KFPSPInstallExceptionHandlers is in libcpu/m68k/MODEL/fpsp and - * is invoked early in the application code to insure that proper FP - * behavior is installed. This is not left to the BSP to call, since - * this would force all applications using that BSP to use FPSP which - * is not necessarily desirable. - * - * There is a similar package for the 68060 but RTEMS does not yet - * support the 68060. - */ - -void M68KFPSPInstallExceptionHandlers (void); - -SCORE_EXTERN int (*_FPSP_install_raw_handler)( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -#endif - - -#endif - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/m68k/cpu_asm.s b/c/src/exec/score/cpu/m68k/cpu_asm.s deleted file mode 100644 index 03747222e5..0000000000 --- a/c/src/exec/score/cpu/m68k/cpu_asm.s +++ /dev/null @@ -1,291 +0,0 @@ -/* cpu_asm.s - * - * This file contains all assembly code for the MC68020 implementation - * of RTEMS. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - - -#include <asm.h> - - .text - -/* void _CPU_Context_switch( run_context, heir_context ) - * - * This routine performs a normal non-FP context. - */ - - .align 4 - .global SYM (_CPU_Context_switch) - -.set RUNCONTEXT_ARG, 4 | save context argument -.set HEIRCONTEXT_ARG, 8 | restore context argument - -SYM (_CPU_Context_switch): - moval a7@(RUNCONTEXT_ARG),a0| a0 = running thread context - movw sr,d1 | d1 = status register - movml d1-d7/a2-a7,a0@ | save context - - moval a7@(HEIRCONTEXT_ARG),a0| a0 = heir thread context -restore: movml a0@,d1-d7/a2-a7 | restore context - movw d1,sr | restore status register - rts - -/*PAGE - * void __CPU_Context_save_fp_context( &fp_context_ptr ) - * void __CPU_Context_restore_fp_context( &fp_context_ptr ) - * - * These routines are used to context switch a MC68881 or MC68882. - * - * NOTE: Context save and restore code is based upon the code shown - * on page 6-38 of the MC68881/68882 Users Manual (rev 1). - * - * CPU_FP_CONTEXT_SIZE is higher than expected to account for the - * -1 pushed at end of this sequence. - * - * Neither of these entries is required if we have software FPU - * emulation. But if we don't have an FPU or emulation, then - * we need the stub versions of these routines. - */ - -#if (CPU_SOFTWARE_FP == FALSE) - -.set FPCONTEXT_ARG, 4 | save FP context argument - - .align 4 - .global SYM (_CPU_Context_save_fp) -SYM (_CPU_Context_save_fp): -#if ( M68K_HAS_FPU == 1 ) - moval a7@(FPCONTEXT_ARG),a1 | a1 = &ptr to context area - moval a1@,a0 | a0 = Save context area - fsave a0@- | save 68881/68882 state frame - tstb a0@ | check for a null frame - beq nosv | Yes, skip save of user model - fmovem fp0-fp7,a0@- | save data registers (fp0-fp7) - fmovem fpc/fps/fpi,a0@- | and save control registers - movl #-1,a0@- | place not-null flag on stack -nosv: movl a0,a1@ | save pointer to saved context -#endif - rts - - .align 4 - .global SYM (_CPU_Context_restore_fp) -SYM (_CPU_Context_restore_fp): -#if ( M68K_HAS_FPU == 1 ) - moval a7@(FPCONTEXT_ARG),a1 | a1 = &ptr to context area - moval a1@,a0 | a0 = address of saved context - tstb a0@ | Null context frame? - beq norst | Yes, skip fp restore - addql #4,a0 | throwaway non-null flag - fmovem a0@+,fpc/fps/fpi | restore control registers - fmovem a0@+,fp0-fp7 | restore data regs (fp0-fp7) -norst: frestore a0@+ | restore the fp state frame - movl a0,a1@ | save pointer to saved context -#endif - rts -#endif - -/*PAGE - * void _ISR_Handler() - * - * This routine provides the RTEMS interrupt management. - * - * NOTE: - * Upon entry, the master stack will contain an interrupt stack frame - * back to the interrupted thread and the interrupt stack will contain - * a throwaway interrupt stack frame. If dispatching is enabled, this - * is the outer most interrupt, and (a context switch is necessary or - * the current thread has signals), then set up the master stack to - * transfer control to the interrupt dispatcher. - */ - -/* - * With this approach, lower priority interrupts may - * execute twice if a higher priority interrupt is - * acknowledged before _Thread_Dispatch_disable is - * incremented and the higher priority interrupt - * performs a context switch after executing. The lower - * priority interrupt will execute (1) at the end of the - * higher priority interrupt in the new context if - * permitted by the new interrupt level mask, and (2) when - * the original context regains the cpu. - */ - -#if ( M68K_COLDFIRE_ARCH == 1 ) -.set SR_OFFSET, 2 | Status register offset -.set PC_OFFSET, 4 | Program Counter offset -.set FVO_OFFSET, 0 | Format/vector offset -#elif ( M68K_HAS_VBR == 1) -.set SR_OFFSET, 0 | Status register offset -.set PC_OFFSET, 2 | Program Counter offset -.set FVO_OFFSET, 6 | Format/vector offset -#else -.set SR_OFFSET, 2 | Status register offset -.set PC_OFFSET, 4 | Program Counter offset -.set FVO_OFFSET, 0 | Format/vector offset placed in the stack -#endif /* M68K_HAS_VBR */ - -.set SAVED, 16 | space for saved registers - - .align 4 - .global SYM (_ISR_Handler) - -SYM (_ISR_Handler): - addql #1,SYM (_Thread_Dispatch_disable_level) | disable multitasking -#if ( M68K_COLDFIRE_ARCH == 0 ) - moveml d0-d1/a0-a1,a7@- | save d0-d1,a0-a1 - movew a7@(SAVED+FVO_OFFSET),d0 | d0 = F/VO - andl #0x0fff,d0 | d0 = vector offset in vbr -#else - lea a7@(-SAVED),a7 - movm.l d0-d1/a0-a1,a7@ | save d0-d1,a0-a1 - movew a7@(SAVED+FVO_OFFSET),d0 | d0 = F/VO - andl #0x0ffc,d0 | d0 = vector offset in vbr -#endif - - -#if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == 1 ) - #if ( M68K_COLDFIRE_ARCH == 0 ) - movew sr,d1 | Save status register - oriw #0x700,sr | Disable interrupts - #else - move.l d0,a7@- | Save d0 value - move.l #0x700,d0 | Load in disable ints value - move.w sr,d1 | Grab SR - or.l d1,d0 | Create new SR - move.w d0,sr | Disable interrupts - move.l a7@+,d0 | Restore d0 value - #endif - - tstl SYM (_ISR_Nest_level) | Interrupting an interrupt handler? - bne 1f | Yes, just skip over stack switch code - movel SYM(_CPU_Interrupt_stack_high),a0 | End of interrupt stack - movel a7,a0@- | Save task stack pointer - movel a0,a7 | Switch to interrupt stack -1: - addql #1,SYM(_ISR_Nest_level) | one nest level deeper - movew d1,sr | Restore status register -#else - addql #1,SYM (_ISR_Nest_level) | one nest level deeper -#endif /* CPU_HAS_SOFTWARE_INTERRUPT_STACK == 1 */ - -#if ( M68K_HAS_PREINDEXING == 1 ) - movel @( SYM (_ISR_Vector_table),d0:w:1),a0| fetch the ISR -#else - movel # SYM (_ISR_Vector_table),a0 | a0 = base of RTEMS table - addal d0,a0 | a0 = address of vector - movel (a0),a0 | a0 = address of user routine -#endif - - lsrl #2,d0 | d0 = vector number - movel d0,a7@- | push vector number - jbsr a0@ | invoke the user ISR - addql #4,a7 | remove vector number - -#if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == 1 ) - #if ( M68K_COLDFIRE_ARCH == 0 ) - movew sr,d0 | Save status register - oriw #0x700,sr | Disable interrupts - #else - move.l #0x700,d1 | Load in disable int value - move.w sr,d0 | Grab SR - or.l d0,d1 | Create new SR - move.w d1,sr | Load to disable interrupts - #endif - - subql #1,SYM(_ISR_Nest_level) | Reduce interrupt-nesting count - bne 1f | Skip if return to interrupt - movel (a7),a7 | Restore task stack pointer -1: - movew d0,sr | Restore status register -#else - subql #1,SYM (_ISR_Nest_level) | one less nest level -#endif /* CPU_HAS_SOFTWARE_INTERRUPT_STACK == 1 */ - - subql #1,SYM (_Thread_Dispatch_disable_level) - | unnest multitasking - bne exit | If dispatch disabled, exit - -#if ( M68K_HAS_SEPARATE_STACKS == 1 ) - movew #0xf000,d0 | isolate format nibble - andw a7@(SAVED+FVO_OFFSET),d0 | get F/VO - cmpiw #0x1000,d0 | is it a throwaway isf? - bne exit | NOT outer level, so branch -#endif - - tstl SYM (_Context_Switch_necessary) - | Is thread switch necessary? - bne bframe | Yes, invoke dispatcher - - tstl SYM (_ISR_Signals_to_thread_executing) - | signals sent to Run_thread - | while in interrupt handler? - beq exit | No, then exit - - -bframe: clrl SYM (_ISR_Signals_to_thread_executing) - | If sent, will be processed -#if ( M68K_HAS_SEPARATE_STACKS == 1 ) - movec msp,a0 | a0 = master stack pointer - movew #0,a0@- | push format word - movel #SYM(_ISR_Dispatch),a0@- | push return addr - movew a0@(6),a0@- | push saved sr - movec a0,msp | set master stack pointer -#else - jsr SYM (_Thread_Dispatch) | Perform context switch -#endif - -#if ( M68K_COLDFIRE_ARCH == 0 ) -exit: moveml a7@+,d0-d1/a0-a1 | restore d0-d1,a0-a1 -#else -exit: moveml a7@,d0-d1/a0-a1 | restore d0-d1,a0-a1 - lea a7@(SAVED),a7 -#endif - -#if ( M68K_HAS_VBR == 0 ) - addql #2,a7 | pop format/id -#endif /* M68K_HAS_VBR */ - rte | return to thread - | OR _Isr_dispatch - -/*PAGE - * void _ISR_Dispatch() - * - * Entry point from the outermost interrupt service routine exit. - * The current stack is the supervisor mode stack if this processor - * has separate stacks. - * - * 1. save all registers not preserved across C calls. - * 2. invoke the _Thread_Dispatch routine to switch tasks - * or a signal to the currently executing task. - * 3. restore all registers not preserved across C calls. - * 4. return from interrupt - */ - - .global SYM (_ISR_Dispatch) -SYM (_ISR_Dispatch): -#if ( M68K_COLDFIRE_ARCH == 0 ) - movml d0-d1/a0-a1,a7@- - jsr SYM (_Thread_Dispatch) - movml a7@+,d0-d1/a0-a1 -#else - lea a7@(-SAVED),a7 - movml d0-d1/a0-a1,a7@ - jsr SYM (_Thread_Dispatch) - movml a7@,d0-d1/a0-a1 - lea a7@(SAVED),a7 -#endif - -#if ( M68K_HAS_VBR == 0 ) - addql #2,a7 | pop format/id -#endif /* M68K_HAS_VBR */ - rte diff --git a/c/src/exec/score/cpu/m68k/m68302.h b/c/src/exec/score/cpu/m68k/m68302.h deleted file mode 100644 index 084ceac034..0000000000 --- a/c/src/exec/score/cpu/m68k/m68302.h +++ /dev/null @@ -1,661 +0,0 @@ -/* - *------------------------------------------------------------------ - * - * m68302.h - Definitions for Motorola MC68302 processor. - * - * Section references in this file refer to revision 2 of Motorola's - * "MC68302 Integrated Multiprotocol Processor User's Manual". - * (Motorola document MC68302UM/AD REV 2.) - * - * Based on Don Meyer's cpu68302.h that was posted in comp.sys.m68k - * on 17 February, 1993. - * - * Copyright 1995 David W. Glessner. - * - * Redistribution and use in source and binary forms are permitted - * provided that the following conditions are met: - * 1. Redistribution of source code and documentation must retain - * the above copyright notice, this list of conditions and the - * following disclaimer. - * 2. The name of the author may not be used to endorse or promote - * products derived from this software without specific prior - * written permission. - * - * This software is provided "AS IS" without warranty of any kind, - * either expressed or implied, including, but not limited to, the - * implied warranties of merchantability, title and fitness for a - * particular purpose. - * - * - * $Id$ - * - *------------------------------------------------------------------ - */ - -#ifndef __MOTOROLA_MC68302_DEFINITIONS_h -#define __MOTOROLA_MC68302_DEFINITIONS_h - -/* - * BAR - Base Address Register - * Section 2.7 - */ -#define M302_BAR (*((volatile rtems_unsigned16 *) 0xf2)) - -/* - * SCR - System Control Register - * Section 3.8.1 - */ -#define M302_SCR (*((volatile rtems_unsigned32 *) 0xf4)) -/* - * SCR bits - */ -#define RBIT_SCR_IPA 0x08000000 -#define RBIT_SCR_HWT 0x04000000 -#define RBIT_SCR_WPV 0x02000000 -#define RBIT_SCR_ADC 0x01000000 - -#define RBIT_SCR_ERRE 0x00400000 -#define RBIT_SCR_VGE 0x00200000 -#define RBIT_SCR_WPVE 0x00100000 -#define RBIT_SCR_RMCST 0x00080000 -#define RBIT_SCR_EMWS 0x00040000 -#define RBIT_SCR_ADCE 0x00020000 -#define RBIT_SCR_BCLM 0x00010000 - -#define RBIT_SCR_FRZW 0x00008000 -#define RBIT_SCR_FRZ2 0x00004000 -#define RBIT_SCR_FRZ1 0x00002000 -#define RBIT_SCR_SAM 0x00001000 -#define RBIT_SCR_HWDEN 0x00000800 -#define RBIT_SCR_HWDCN2 0x00000400 -#define RBIT_SCR_HWDCN1 0x00000200 /* 512 clocks */ -#define RBIT_SCR_HWDCN0 0x00000100 /* 128 clocks */ - -#define RBIT_SCR_LPREC 0x00000080 -#define RBIT_SCR_LPP16 0x00000040 -#define RBIT_SCR_LPEN 0x00000020 -#define RBIT_SCR_LPCLKDIV 0x0000001f - - -/* - * 68000 interrupt and trap vector numbers - */ -#define M68K_IVEC_BUS_ERROR 2 -#define M68K_IVEC_ADDRESS_ERROR 3 -#define M68K_IVEC_ILLEGAL_OPCODE 4 -#define M68K_IVEC_ZERO_DIVIDE 5 -#define M68K_IVEC_CHK 6 -#define M68K_IVEC_TRAPV 7 -#define M68K_IVEC_PRIVILEGE 8 -#define M68K_IVEC_TRACE 9 -#define M68K_IVEC_LINE_A 10 -#define M68K_IVEC_LINE_F 11 -/* Unassigned, Reserved 12-14 */ -#define M68K_IVEC_UNINITIALIZED_INT 15 -/* Unassigned, Reserved 16-23 */ -#define M68K_IVEC_SPURIOUS_INT 24 - -#define M68K_IVEC_LEVEL1_AUTOVECTOR 25 -#define M68K_IVEC_LEVEL2_AUTOVECTOR 26 -#define M68K_IVEC_LEVEL3_AUTOVECTOR 27 -#define M68K_IVEC_LEVEL4_AUTOVECTOR 28 -#define M68K_IVEC_LEVEL5_AUTOVECTOR 29 -#define M68K_IVEC_LEVEL6_AUTOVECTOR 30 -#define M68K_IVEC_LEVEL7_AUTOVECTOR 31 - -#define M68K_IVEC_TRAP0 32 -#define M68K_IVEC_TRAP1 33 -#define M68K_IVEC_TRAP2 34 -#define M68K_IVEC_TRAP3 35 -#define M68K_IVEC_TRAP4 36 -#define M68K_IVEC_TRAP5 37 -#define M68K_IVEC_TRAP6 38 -#define M68K_IVEC_TRAP7 39 -#define M68K_IVEC_TRAP8 40 -#define M68K_IVEC_TRAP9 41 -#define M68K_IVEC_TRAP10 42 -#define M68K_IVEC_TRAP11 43 -#define M68K_IVEC_TRAP12 44 -#define M68K_IVEC_TRAP13 45 -#define M68K_IVEC_TRAP14 46 -#define M68K_IVEC_TRAP15 47 -/* - * Unassigned, Reserved 48-59 - * - * Note: Vectors 60-63 are used by the MC68302 (e.g. BAR, SCR). - */ - -/* - * MC68302 Interrupt Vectors - * Section 3.2 - */ -enum m68302_ivec_e { - M302_IVEC_ERR =0, - M302_IVEC_PB8 =1, /* General-Purpose Interrupt 0 */ - M302_IVEC_SMC2 =2, - M302_IVEC_SMC1 =3, - M302_IVEC_TIMER3 =4, - M302_IVEC_SCP =5, - M302_IVEC_TIMER2 =6, - M302_IVEC_PB9 =7, /* General-Purpose Interrupt 1 */ - M302_IVEC_SCC3 =8, - M302_IVEC_TIMER1 =9, - M302_IVEC_SCC2 =10, - M302_IVEC_IDMA =11, - M302_IVEC_SDMA =12, /* SDMA Channels Bus Error */ - M302_IVEC_SCC1 =13, - M302_IVEC_PB10 =14, /* General-Purpose Interrupt 2 */ - M302_IVEC_PB11 =15, /* General-Purpose Interrupt 3 */ - M302_IVEC_IRQ1 =17, /* External Device */ - M302_IVEC_IRQ6 =22, /* External Device */ - M302_IVEC_IRQ7 =23 /* External Device */ -}; - - -/* - * GIMR - Global Interrupt Mode Register - * Section 3.2.5.1 - */ -#define RBIT_GIMR_MOD (1<<15) -#define RBIT_GIMR_IV7 (1<<14) -#define RBIT_GIMR_IV6 (1<<13) -#define RBIT_GIMR_IV1 (1<<12) -#define RBIT_GIMR_ET7 (1<<10) -#define RBIT_GIMR_ET6 (1<<9) -#define RBIT_GIMR_ET1 (1<<8) -#define RBIT_GIMR_VECTOR (7<<5) - -/* - * IPR - Interrupt Pending Register (Section 3.2.5.2) - * IMR - Interrupt Mask Register (Section 3.2.5.3) - * ISR - Interrupt In-Service Register (Section 3.2.5.4) - */ -#define RBIT_IPR_PB11 (1<<15) -#define RBIT_IPR_PB10 (1<<14) -#define RBIT_IPR_SCC1 (1<<13) -#define RBIT_IPR_SDMA (1<<12) -#define RBIT_IPR_IDMA (1<<11) -#define RBIT_IPR_SCC2 (1<<10) -#define RBIT_IPR_TIMER1 (1<<9) -#define RBIT_IPR_SCC3 (1<<8) -#define RBIT_IPR_PB9 (1<<7) -#define RBIT_IPR_TIMER2 (1<<6) -#define RBIT_IPR_SCP (1<<5) -#define RBIT_IPR_TIMER3 (1<<4) -#define RBIT_IPR_SMC1 (1<<3) -#define RBIT_IPR_SMC2 (1<<2) -#define RBIT_IPR_PB8 (1<<1) -#define RBIT_IPR_ERR (1<<0) - -#define RBIT_ISR_PB11 (1<<15) -#define RBIT_ISR_PB10 (1<<14) -#define RBIT_ISR_SCC1 (1<<13) -#define RBIT_ISR_SDMA (1<<12) -#define RBIT_ISR_IDMA (1<<11) -#define RBIT_ISR_SCC2 (1<<10) -#define RBIT_ISR_TIMER1 (1<<9) -#define RBIT_ISR_SCC3 (1<<8) -#define RBIT_ISR_PB9 (1<<7) -#define RBIT_ISR_TIMER2 (1<<6) -#define RBIT_ISR_SCP (1<<5) -#define RBIT_ISR_TIMER3 (1<<4) -#define RBIT_ISR_SMC1 (1<<3) -#define RBIT_ISR_SMC2 (1<<2) -#define RBIT_ISR_PB8 (1<<1) - -#define RBIT_IMR_PB11 (1<<15) /* PB11 Interrupt Mask */ -#define RBIT_IMR_PB10 (1<<14) /* PB10 Interrupt Mask */ -#define RBIT_IMR_SCC1 (1<<13) /* SCC1 Interrupt Mask */ -#define RBIT_IMR_SDMA (1<<12) /* SDMA Interrupt Mask */ -#define RBIT_IMR_IDMA (1<<11) /* IDMA Interrupt Mask */ -#define RBIT_IMR_SCC2 (1<<10) /* SCC2 Interrupt Mask */ -#define RBIT_IMR_TIMER1 (1<<9) /* TIMER1 Interrupt Mask */ -#define RBIT_IMR_SCC3 (1<<8) /* SCC3 Interrupt Mask */ -#define RBIT_IMR_PB9 (1<<7) /* PB9 Interrupt Mask */ -#define RBIT_IMR_TIMER2 (1<<6) /* TIMER2 Interrupt Mask */ -#define RBIT_IMR_SCP (1<<5) /* SCP Interrupt Mask */ -#define RBIT_IMR_TIMER3 (1<<4) /* TIMER3 Interrupt Mask */ -#define RBIT_IMR_SMC1 (1<<3) /* SMC1 Interrupt Mask */ -#define RBIT_IMR_SMC2 (1<<2) /* SMC2 Interrupt Mask */ -#define RBIT_IMR_PB8 (1<<1) /* PB8 Interrupt Mask */ - - -/* - * DRAM Refresh - * Section 3.9 - * - * The DRAM refresh memory map replaces the SCC2 Tx BD 6 and Tx BD 7 - * structures in the parameter RAM. - * - * Access to the DRAM registers can be accomplished by - * the following approach: - * - * volatile m302_DRAM_refresh_t *dram; - * dram = (volatile m302_DRAM_refresh_t *) &m302.scc2.bd.tx[6]; - * - * Then simply use pointer references (e.g. dram->count = 3). - */ -typedef struct { - rtems_unsigned16 dram_high; /* DRAM high address and FC */ - rtems_unsigned16 dram_low; /* DRAM low address */ - rtems_unsigned16 increment; /* increment step (bytes/row) */ - rtems_unsigned16 count; /* RAM refresh cycle count (#rows) */ - rtems_unsigned16 t_ptr_h; /* temporary refresh high addr & FC */ - rtems_unsigned16 t_ptr_l; /* temporary refresh low address */ - rtems_unsigned16 t_count; /* temporary refresh cycles count */ - rtems_unsigned16 res; /* reserved */ -} m302_DRAM_refresh_t; - - -/* - * TMR - Timer Mode Register (for timers 1 and 2) - * Section 3.5.2.1 - */ -#define RBIT_TMR_ICLK_STOP (0<<1) -#define RBIT_TMR_ICLK_MASTER (1<<1) -#define RBIT_TMR_ICLK_MASTER16 (2<<1) -#define RBIT_TMR_ICLK_TIN (3<<1) - -#define RBIT_TMR_OM (1<<5) -#define RBIT_TMR_ORI (1<<4) -#define RBIT_TMR_FRR (1<<3) -#define RBIT_TMR_RST (1<<0) - - -/* - * TER - Timer Event Register (for timers 1 and 2) - * Section 3.5.2.5 - */ -#define RBIT_TER_REF (1<<1) /* Output Reference Event */ -#define RBIT_TER_CAP (1<<0) /* Capture Event */ - - -/* - * SCC Buffer Descriptors and Buffer Descriptors Table - * Section 4.5.5 - */ -typedef struct m302_SCC_bd { - rtems_unsigned16 status; /* status and control */ - rtems_unsigned16 length; /* data length */ - rtems_unsigned8 *buffer; /* data buffer pointer */ -} m302_SCC_bd_t; - -typedef struct { - m302_SCC_bd_t rx[8]; /* receive buffer descriptors */ - m302_SCC_bd_t tx[8]; /* transmit buffer descriptors */ -} m302_SCC_bd_table_t; - - -/* - * SCC Parameter RAM (offset 0x080 from an SCC Base) - * Section 4.5.6 - * - * Each SCC parameter RAM area begins at offset 0x80 from each SCC base - * area (0x400, 0x500, or 0x600 from the dual-port RAM base). - * - * Offsets 0x9c-0xbf from each SCC base area compose the protocol-specific - * portion of the SCC parameter RAM. - */ -typedef struct { - rtems_unsigned8 rfcr; /* Rx Function Code */ - rtems_unsigned8 tfcr; /* Tx Function Code */ - rtems_unsigned16 mrblr; /* Maximum Rx Buffer Length */ - rtems_unsigned16 _rstate; /* Rx Internal State */ - rtems_unsigned8 res2; - rtems_unsigned8 rbd; /* Rx Internal Buffer Number */ - rtems_unsigned32 _rdptr; /* Rx Internal Data Pointer */ - rtems_unsigned16 _rcount; /* Rx Internal Byte Count */ - rtems_unsigned16 _rtmp; /* Rx Temp */ - rtems_unsigned16 _tstate; /* Tx Internal State */ - rtems_unsigned8 res7; - rtems_unsigned8 tbd; /* Tx Internal Buffer Number */ - rtems_unsigned32 _tdptr; /* Tx Internal Data Pointer */ - rtems_unsigned16 _tcount; /* Tx Internal Byte Count */ - rtems_unsigned16 _ttmp; /* Tx Temp */ -} m302_SCC_parameters_t; - -/* - * UART-Specific SCC Parameter RAM - * Section 4.5.11.3 - */ -typedef struct { - rtems_unsigned16 max_idl; /* Maximum IDLE Characters (rx) */ - rtems_unsigned16 idlc; /* Temporary rx IDLE counter */ - rtems_unsigned16 brkcr; /* Break Count Register (tx) */ - rtems_unsigned16 parec; /* Receive Parity Error Counter */ - rtems_unsigned16 frmec; /* Receive Framing Error Counter */ - rtems_unsigned16 nosec; /* Receive Noise Counter */ - rtems_unsigned16 brkec; /* Receive Break Condition Counter */ - rtems_unsigned16 uaddr1; /* UART ADDRESS Character 1 */ - rtems_unsigned16 uaddr2; /* UART ADDRESS Character 2 */ - rtems_unsigned16 rccr; /* Receive Control Character Register */ - rtems_unsigned16 character[8]; /* Control Characters 1 through 8*/ -} m302_SCC_UartSpecific_t; -/* - * This definition allows for the checking of receive buffers - * for errors. - */ - -#define RCV_ERR 0x003F - -/* - * UART receive buffer descriptor bit definitions. - * Section 4.5.11.14 - */ -#define RBIT_UART_CTRL (1<<11) /* buffer contains a control char */ -#define RBIT_UART_ADDR (1<<10) /* first byte contains an address */ -#define RBIT_UART_MATCH (1<<9) /* indicates which addr char matched */ -#define RBIT_UART_IDLE (1<<8) /* buffer closed due to IDLE sequence */ -#define RBIT_UART_BR (1<<5) /* break sequence was received */ -#define RBIT_UART_FR (1<<4) /* framing error was received */ -#define RBIT_UART_PR (1<<3) /* parity error was received */ -#define RBIT_UART_OV (1<<1) /* receiver overrun occurred */ -#define RBIT_UART_CD (1<<0) /* carrier detect lost */ -#define RBIT_UART_STATUS 0x003B /* all status bits */ - -/* - * UART transmit buffer descriptor bit definitions. - * Section 4.5.11.15 - */ -#define RBIT_UART_CR (1<<11) /* clear-to-send report - * this results in two idle bits - * between back-to-back frames - */ -#define RBIT_UART_A (1<<10) /* buffer contains address characters - * only valid in multidrop mode (UM0=1) - */ -#define RBIT_UART_PREAMBLE (1<<9) /* send preamble before data */ -#define RBIT_UART_CTS_LOST (1<<0) /* CTS lost */ - -/* - * UART event register - * Section 4.5.11.16 - */ -#define M302_UART_EV_CTS (1<<7) /* CTS status changed */ -#define M302_UART_EV_CD (1<<6) /* carrier detect status changed */ -#define M302_UART_EV_IDL (1<<5) /* IDLE sequence status changed */ -#define M302_UART_EV_BRK (1<<4) /* break character was received */ -#define M302_UART_EV_CCR (1<<3) /* control character received */ -#define M302_UART_EV_TX (1<<1) /* buffer has been transmitted */ -#define M302_UART_EV_RX (1<<0) /* buffer has been received */ - - -/* - * HDLC-Specific SCC Parameter RAM - * Section 4.5.12.3 - * - * c_mask_l should be 0xF0B8 for 16-bit CRC, 0xdebb for 32-bit CRC - * c_mask_h is a don't care for 16-bit CRC, 0x20E2 for 32-bit CRC - */ -typedef struct { - rtems_unsigned16 rcrc_l; /* Temp Receive CRC Low */ - rtems_unsigned16 rcrc_h; /* Temp Receive CRC High */ - rtems_unsigned16 c_mask_l; /* CRC Mask Low */ - rtems_unsigned16 c_mask_h; /* CRC Mask High */ - rtems_unsigned16 tcrc_l; /* Temp Transmit CRC Low */ - rtems_unsigned16 tcrc_h; /* Temp Transmit CRC High */ - - rtems_unsigned16 disfc; /* Discard Frame Counter */ - rtems_unsigned16 crcec; /* CRC Error Counter */ - rtems_unsigned16 abtsc; /* Abort Sequence Counter */ - rtems_unsigned16 nmarc; /* Nonmatching Address Received Cntr */ - rtems_unsigned16 retrc; /* Frame Retransmission Counter */ - - rtems_unsigned16 mflr; /* Maximum Frame Length Register */ - rtems_unsigned16 max_cnt; /* Maximum_Length Counter */ - - rtems_unsigned16 hmask; /* User Defined Frame Address Mask */ - rtems_unsigned16 haddr1; /* User Defined Frame Address */ - rtems_unsigned16 haddr2; /* " */ - rtems_unsigned16 haddr3; /* " */ - rtems_unsigned16 haddr4; /* " */ -} m302_SCC_HdlcSpecific_t; -/* - * HDLC receiver buffer descriptor bit definitions - * Section 4.5.12.10 - */ -#define RBIT_HDLC_EMPTY_BIT 0x8000 /* buffer associated with BD is empty */ -#define RBIT_HDLC_LAST_BIT 0x0800 /* buffer is last in a frame */ -#define RBIT_HDLC_FIRST_BIT 0x0400 /* buffer is first in a frame */ -#define RBIT_HDLC_FRAME_LEN 0x0020 /* receiver frame length violation */ -#define RBIT_HDLC_NONOCT_Rx 0x0010 /* received non-octet aligned frame */ -#define RBIT_HDLC_ABORT_SEQ 0x0008 /* received abort sequence */ -#define RBIT_HDLC_CRC_ERROR 0x0004 /* frame contains a CRC error */ -#define RBIT_HDLC_OVERRUN 0x0002 /* receiver overrun occurred */ -#define RBIT_HDLC_CD_LOST 0x0001 /* carrier detect lost */ - -/* - * HDLC transmit buffer descriptor bit definitions - * Section 4.5.12.11 - */ -#define RBIT_HDLC_READY_BIT 0x8000 /* buffer is ready to transmit */ -#define RBIT_HDLC_EXT_BUFFER 0x4000 /* buffer is in external memory */ -#define RBIT_HDLC_WRAP_BIT 0x2000 /* last buffer in bd table, so wrap */ -#define RBIT_HDLC_WAKE_UP 0x1000 /* interrupt when buffer serviced */ -#define RBIT_HDLC_LAST_BIT 0x0800 /* buffer is last in the frame */ -#define RBIT_HDLC_TxCRC_BIT 0x0400 /* transmit a CRC sequence */ -#define RBIT_HDLC_UNDERRUN 0x0002 /* transmitter underrun */ -#define RBIT_HDLC_CTS_LOST 0x0001 /* CTS lost */ - -/* - * HDLC event register bit definitions - * Section 4.5.12.12 - */ -#define RBIT_HDLC_CTS 0x80 /* CTS status changed */ -#define RBIT_HDLC_CD 0x40 /* carrier detect status changed */ -#define RBIT_HDLC_IDL 0x20 /* IDLE sequence status changed */ -#define RBIT_HDLC_TXE 0x10 /* transmit error */ -#define RBIT_HDLC_RXF 0x08 /* received frame */ -#define RBIT_HDLC_BSY 0x04 /* frame rcvd and discarded due to - * lack of buffers - */ -#define RBIT_HDLC_TXB 0x02 /* buffer has been transmitted */ -#define RBIT_HDLC_RXB 0x01 /* received buffer */ - - - -typedef struct { - m302_SCC_bd_table_t bd; /* +000 Buffer Descriptor Table */ - m302_SCC_parameters_t parm; /* +080 Common Parameter RAM */ - union { /* +09C Protocol-Specific Parm RAM */ - m302_SCC_UartSpecific_t uart; - m302_SCC_HdlcSpecific_t hdlc; - } prot; - rtems_unsigned8 res[0x040]; /* +0C0 reserved, (not implemented) */ -} m302_SCC_t; - - -/* - * Common SCC Registers - */ -typedef struct { - rtems_unsigned16 res1; - rtems_unsigned16 scon; /* SCC Configuration Register 4.5.2 */ - rtems_unsigned16 scm; /* SCC Mode Register 4.5.3 */ - rtems_unsigned16 dsr; /* SCC Data Synchronization Register 4.5.4 */ - rtems_unsigned8 scce; /* SCC Event Register 4.5.8.1 */ - rtems_unsigned8 res2; - rtems_unsigned8 sccm; /* SCC Mask Register 4.5.8.2 */ - rtems_unsigned8 res3; - rtems_unsigned8 sccs; /* SCC Status Register 4.5.8.3 */ - rtems_unsigned8 res4; - rtems_unsigned16 res5; -} m302_SCC_Registers_t; - -/* - * SCON - SCC Configuration Register - * Section 4.5.2 - */ -#define RBIT_SCON_WOMS (1<<15) /* Wired-OR Mode Select (NMSI mode only) - * When set, the TXD driver is an - * open-drain output */ -#define RBIT_SCON_EXTC (1<<14) /* External Clock Source */ -#define RBIT_SCON_TCS (1<<13) /* Transmit Clock Source */ -#define RBIT_SCON_RCS (1<<12) /* Receive Clock Source */ - -/* - * SCM - SCC Mode Register bit definitions - * Section 4.5.3 - * The parameter-specific mode bits occupy bits 15 through 6. - */ -#define RBIT_SCM_ENR (1<<3) /* Enable receiver */ -#define RBIT_SCM_ENT (1<<2) /* Enable transmitter */ - - -/* - * Internal MC68302 Registers - * starts at offset 0x800 from dual-port RAM base - * Section 2.8 - */ -typedef struct { - /* offset +800 */ - rtems_unsigned16 res0; - rtems_unsigned16 cmr; /* IDMA Channel Mode Register */ - rtems_unsigned32 sapr; /* IDMA Source Address Pointer */ - rtems_unsigned32 dapr; /* IDMA Destination Address Pointer */ - rtems_unsigned16 bcr; /* IDMA Byte Count Register */ - rtems_unsigned8 csr; /* IDMA Channel Status Register */ - rtems_unsigned8 res1; - rtems_unsigned8 fcr; /* IDMA Function Code Register */ - rtems_unsigned8 res2; - - /* offset +812 */ - rtems_unsigned16 gimr; /* Global Interrupt Mode Register */ - rtems_unsigned16 ipr; /* Interrupt Pending Register */ - rtems_unsigned16 imr; /* Interrupt Mask Register */ - rtems_unsigned16 isr; /* Interrupt In-Service Register */ - rtems_unsigned16 res3; - rtems_unsigned16 res4; - - /* offset +81e */ - rtems_unsigned16 pacnt; /* Port A Control Register */ - rtems_unsigned16 paddr; /* Port A Data Direction Register */ - rtems_unsigned16 padat; /* Port A Data Register */ - rtems_unsigned16 pbcnt; /* Port B Control Register */ - rtems_unsigned16 pbddr; /* Port B Data Direction Register */ - rtems_unsigned16 pbdat; /* Port B Data Register */ - rtems_unsigned16 res5; - - /* offset +82c */ - rtems_unsigned16 res6; - rtems_unsigned16 res7; - - rtems_unsigned16 br0; /* Base Register (CS0) */ - rtems_unsigned16 or0; /* Option Register (CS0) */ - rtems_unsigned16 br1; /* Base Register (CS1) */ - rtems_unsigned16 or1; /* Option Register (CS1) */ - rtems_unsigned16 br2; /* Base Register (CS2) */ - rtems_unsigned16 or2; /* Option Register (CS2) */ - rtems_unsigned16 br3; /* Base Register (CS3) */ - rtems_unsigned16 or3; /* Option Register (CS3) */ - - /* offset +840 */ - rtems_unsigned16 tmr1; /* Timer Unit 1 Mode Register */ - rtems_unsigned16 trr1; /* Timer Unit 1 Reference Register */ - rtems_unsigned16 tcr1; /* Timer Unit 1 Capture Register */ - rtems_unsigned16 tcn1; /* Timer Unit 1 Counter */ - rtems_unsigned8 res8; - rtems_unsigned8 ter1; /* Timer Unit 1 Event Register */ - rtems_unsigned16 wrr; /* Watchdog Reference Register */ - rtems_unsigned16 wcn; /* Watchdog Counter */ - rtems_unsigned16 res9; - rtems_unsigned16 tmr2; /* Timer Unit 2 Mode Register */ - rtems_unsigned16 trr2; /* Timer Unit 2 Reference Register */ - rtems_unsigned16 tcr2; /* Timer Unit 2 Capture Register */ - rtems_unsigned16 tcn2; /* Timer Unit 2 Counter */ - rtems_unsigned8 resa; - rtems_unsigned8 ter2; /* Timer Unit 2 Event Register */ - rtems_unsigned16 resb; - rtems_unsigned16 resc; - rtems_unsigned16 resd; - - /* offset +860 */ - rtems_unsigned8 cr; /* Command Register */ - rtems_unsigned8 rese[0x1f]; - - /* offset +880, +890, +8a0 */ - m302_SCC_Registers_t scc[3]; /* SCC1, SCC2, SCC3 Registers */ - - /* offset +8b0 */ - rtems_unsigned16 spmode; /* SCP,SMC Mode and Clock Cntrl Reg */ - rtems_unsigned16 simask; /* Serial Interface Mask Register */ - rtems_unsigned16 simode; /* Serial Interface Mode Register */ -} m302_internalReg_t ; - - -/* - * MC68302 dual-port RAM structure. - * (Includes System RAM, Parameter RAM, and Internal Registers). - * Section 2.8 - */ -typedef struct { - rtems_unsigned8 mem[0x240]; /* +000 User Data Memory */ - rtems_unsigned8 res1[0x1c0]; /* +240 reserved, (not implemented) */ - m302_SCC_t scc1; /* +400 SCC1 */ - m302_SCC_t scc2; /* +500 SCC2 */ - m302_SCC_t scc3; /* +600 SCC3 */ - rtems_unsigned8 res2[0x100]; /* +700 reserved, (not implemented) */ - m302_internalReg_t reg; /* +800 68302 Internal Registers */ -} m302_dualPortRAM_t; - -/* some useful defines the some of the registers above */ - - -/* ---- - MC68302 Chip Select Registers - p3-46 2nd Edition - - */ -#define BR_ENABLED 1 -#define BR_DISABLED 0 -#define BR_FC_NULL 0 -#define BR_READ_ONLY 0 -#define BR_READ_WRITE 2 -#define OR_DTACK_0 0x0000 -#define OR_DTACK_1 0x2000 -#define OR_DTACK_2 0x4000 -#define OR_DTACK_3 0x6000 -#define OR_DTACK_4 0x8000 -#define OR_DTACK_5 0xA000 -#define OR_DTACK_6 0xC000 -#define OR_DTACK_EXT 0xE000 -#define OR_SIZE_64K 0x1FE0 -#define OR_SIZE_128K 0x1FC0 -#define OR_SIZE_256K 0x1F80 -#define OR_SIZE_512K 0x1F00 -#define OR_SIZE_1M 0x1E00 -#define OR_SIZE_2M 0x1C00 -#define OR_MASK_RW 0x0000 -#define OR_NO_MASK_RW 0x0002 -#define OR_MASK_FC 0x0000 -#define OR_NO_MASK_FC 0x0001 - -#define MAKE_BR(base_address, enable, rw, fc) \ - ((base_address >> 11) | fc | rw | enable) - -#define MAKE_OR(bsize, DtAck, RW_Mask, FC_Mask) \ - (DtAck | ((~(bsize - 1) & 0x00FFFFFF) >> 11) | FC_Mask | RW_Mask) - -#define __REG_CAT(r, n) r ## n -#define WRITE_BR(csel, base_address, enable, rw, fc) \ - __REG_CAT(m302.reg.br, csel) = MAKE_BR(base_address, enable, rw, fc) -#define WRITE_OR(csel, bsize, DtAck, RW_Mask, FC_Mask) \ - __REG_CAT(m302.reg.or, csel) = MAKE_OR(bsize, DtAck, RW_Mask, FC_Mask) - -/* ---- - MC68302 Watchdog Timer Enable Bit - - */ -#define WATCHDOG_ENABLE (1) -#define WATCHDOG_TRIGGER() (m302.reg.wrr = 0x10 | WATCHDOG_ENABLE, m302.reg.wcn = 0) -#define WATCHDOG_TOGGLE() (m302.reg.wcn = WATCHDOG_TIMEOUT_PERIOD) -#define DISABLE_WATCHDOG() (m302.reg.wrr = 0) - -/* - * Declare the variable that's used to reference the variables in - * the dual-port RAM. - */ -extern volatile m302_dualPortRAM_t m302; - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/m68k/m68360.h b/c/src/exec/score/cpu/m68k/m68360.h deleted file mode 100644 index 84687c49fa..0000000000 --- a/c/src/exec/score/cpu/m68k/m68360.h +++ /dev/null @@ -1,880 +0,0 @@ -/* - ************************************************************************** - ************************************************************************** - ** ** - ** MOTOROLA MC68360 QUAD INTEGRATED COMMUNICATIONS CONTROLLER (QUICC) ** - ** ** - ** HARDWARE DECLARATIONS ** - ** ** - ** ** - ** Submitted By: ** - ** ** - ** W. Eric Norum ** - ** Saskatchewan Accelerator Laboratory ** - ** University of Saskatchewan ** - ** 107 North Road ** - ** Saskatoon, Saskatchewan, CANADA ** - ** S7N 5C6 ** - ** ** - ** eric@skatter.usask.ca ** - ** ** - ** $Id$ ** - ** ** - ************************************************************************** - ************************************************************************** - */ - -#ifndef __MC68360_h -#define __MC68360_h - -/* - ************************************************************************* - * REGISTER SUBBLOCKS * - ************************************************************************* - */ - -/* - * Memory controller registers - */ -typedef struct m360MEMCRegisters_ { - rtems_unsigned32 br; - rtems_unsigned32 or; - rtems_unsigned32 _pad[2]; -} m360MEMCRegisters_t; - -/* - * Serial Communications Controller registers - */ -typedef struct m360SCCRegisters_ { - rtems_unsigned32 gsmr_l; - rtems_unsigned32 gsmr_h; - rtems_unsigned16 psmr; - rtems_unsigned16 _pad0; - rtems_unsigned16 todr; - rtems_unsigned16 dsr; - rtems_unsigned16 scce; - rtems_unsigned16 _pad1; - rtems_unsigned16 sccm; - rtems_unsigned8 _pad2; - rtems_unsigned8 sccs; - rtems_unsigned32 _pad3[2]; -} m360SCCRegisters_t; - -/* - * Serial Management Controller registers - */ -typedef struct m360SMCRegisters_ { - rtems_unsigned16 _pad0; - rtems_unsigned16 smcmr; - rtems_unsigned16 _pad1; - rtems_unsigned8 smce; - rtems_unsigned8 _pad2; - rtems_unsigned16 _pad3; - rtems_unsigned8 smcm; - rtems_unsigned8 _pad4; - rtems_unsigned32 _pad5; -} m360SMCRegisters_t; - - -/* - ************************************************************************* - * Miscellaneous Parameters * - ************************************************************************* - */ -typedef struct m360MiscParms_ { - rtems_unsigned16 rev_num; - rtems_unsigned16 _res1; - rtems_unsigned32 _res2; - rtems_unsigned32 _res3; -} m360MiscParms_t; - -/* - ************************************************************************* - * RISC Timers * - ************************************************************************* - */ -typedef struct m360TimerParms_ { - rtems_unsigned16 tm_base; - rtems_unsigned16 _tm_ptr; - rtems_unsigned16 _r_tmr; - rtems_unsigned16 _r_tmv; - rtems_unsigned32 tm_cmd; - rtems_unsigned32 tm_cnt; -} m360TimerParms_t; - -/* - * RISC Controller Configuration Register (RCCR) - * All other bits in this register are either reserved or - * used only with a Motorola-supplied RAM microcode packge. - */ -#define M360_RCCR_TIME (1<<15) /* Enable timer */ -#define M360_RCCR_TIMEP(x) ((x)<<8) /* Timer period */ - -/* - * Command register - * Set up this register before issuing a M360_CR_OP_SET_TIMER command. - */ -#define M360_TM_CMD_V (1<<31) /* Set to enable timer */ -#define M360_TM_CMD_R (1<<30) /* Set for automatic restart */ -#define M360_TM_CMD_TIMER(x) ((x)<<16) /* Select timer */ -#define M360_TM_CMD_PERIOD(x) (x) /* Timer period (16 bits) */ - -/* - ************************************************************************* - * DMA Controllers * - ************************************************************************* - */ -typedef struct m360IDMAparms_ { - rtems_unsigned16 ibase; - rtems_unsigned16 ibptr; - rtems_unsigned32 _istate; - rtems_unsigned32 _itemp; -} m360IDMAparms_t; - -/* - ************************************************************************* - * Serial Communication Controllers * - ************************************************************************* - */ -typedef struct m360SCCparms_ { - rtems_unsigned16 rbase; - rtems_unsigned16 tbase; - rtems_unsigned8 rfcr; - rtems_unsigned8 tfcr; - rtems_unsigned16 mrblr; - rtems_unsigned32 _rstate; - rtems_unsigned32 _pad0; - rtems_unsigned16 _rbptr; - rtems_unsigned16 _pad1; - rtems_unsigned32 _pad2; - rtems_unsigned32 _tstate; - rtems_unsigned32 _pad3; - rtems_unsigned16 _tbptr; - rtems_unsigned16 _pad4; - rtems_unsigned32 _pad5; - rtems_unsigned32 _rcrc; - rtems_unsigned32 _tcrc; - union { - struct { - rtems_unsigned32 _res0; - rtems_unsigned32 _res1; - rtems_unsigned16 max_idl; - rtems_unsigned16 _idlc; - rtems_unsigned16 brkcr; - rtems_unsigned16 parec; - rtems_unsigned16 frmec; - rtems_unsigned16 nosec; - rtems_unsigned16 brkec; - rtems_unsigned16 brklen; - rtems_unsigned16 uaddr[2]; - rtems_unsigned16 _rtemp; - rtems_unsigned16 toseq; - rtems_unsigned16 character[8]; - rtems_unsigned16 rccm; - rtems_unsigned16 rccr; - rtems_unsigned16 rlbc; - } uart; - } un; -} m360SCCparms_t; - -typedef struct m360SCCENparms_ { - rtems_unsigned16 rbase; - rtems_unsigned16 tbase; - rtems_unsigned8 rfcr; - rtems_unsigned8 tfcr; - rtems_unsigned16 mrblr; - rtems_unsigned32 _rstate; - rtems_unsigned32 _pad0; - rtems_unsigned16 _rbptr; - rtems_unsigned16 _pad1; - rtems_unsigned32 _pad2; - rtems_unsigned32 _tstate; - rtems_unsigned32 _pad3; - rtems_unsigned16 _tbptr; - rtems_unsigned16 _pad4; - rtems_unsigned32 _pad5; - rtems_unsigned32 _rcrc; - rtems_unsigned32 _tcrc; - union { - struct { - rtems_unsigned32 _res0; - rtems_unsigned32 _res1; - rtems_unsigned16 max_idl; - rtems_unsigned16 _idlc; - rtems_unsigned16 brkcr; - rtems_unsigned16 parec; - rtems_unsigned16 frmec; - rtems_unsigned16 nosec; - rtems_unsigned16 brkec; - rtems_unsigned16 brklen; - rtems_unsigned16 uaddr[2]; - rtems_unsigned16 _rtemp; - rtems_unsigned16 toseq; - rtems_unsigned16 character[8]; - rtems_unsigned16 rccm; - rtems_unsigned16 rccr; - rtems_unsigned16 rlbc; - } uart; - struct { - rtems_unsigned32 c_pres; - rtems_unsigned32 c_mask; - rtems_unsigned32 crcec; - rtems_unsigned32 alec; - rtems_unsigned32 disfc; - rtems_unsigned16 pads; - rtems_unsigned16 ret_lim; - rtems_unsigned16 _ret_cnt; - rtems_unsigned16 mflr; - rtems_unsigned16 minflr; - rtems_unsigned16 maxd1; - rtems_unsigned16 maxd2; - rtems_unsigned16 _maxd; - rtems_unsigned16 dma_cnt; - rtems_unsigned16 _max_b; - rtems_unsigned16 gaddr1; - rtems_unsigned16 gaddr2; - rtems_unsigned16 gaddr3; - rtems_unsigned16 gaddr4; - rtems_unsigned32 _tbuf0data0; - rtems_unsigned32 _tbuf0data1; - rtems_unsigned32 _tbuf0rba0; - rtems_unsigned32 _tbuf0crc; - rtems_unsigned16 _tbuf0bcnt; - rtems_unsigned16 paddr_h; - rtems_unsigned16 paddr_m; - rtems_unsigned16 paddr_l; - rtems_unsigned16 p_per; - rtems_unsigned16 _rfbd_ptr; - rtems_unsigned16 _tfbd_ptr; - rtems_unsigned16 _tlbd_ptr; - rtems_unsigned32 _tbuf1data0; - rtems_unsigned32 _tbuf1data1; - rtems_unsigned32 _tbuf1rba0; - rtems_unsigned32 _tbuf1crc; - rtems_unsigned16 _tbuf1bcnt; - rtems_unsigned16 _tx_len; - rtems_unsigned16 iaddr1; - rtems_unsigned16 iaddr2; - rtems_unsigned16 iaddr3; - rtems_unsigned16 iaddr4; - rtems_unsigned16 _boff_cnt; - rtems_unsigned16 taddr_l; - rtems_unsigned16 taddr_m; - rtems_unsigned16 taddr_h; - } ethernet; - } un; -} m360SCCENparms_t; - -/* - * Receive and transmit function code register bits - * These apply to the function code registers of all devices, not just SCC. - */ -#define M360_RFCR_MOT (1<<4) -#define M360_RFCR_DMA_SPACE 0x8 -#define M360_TFCR_MOT (1<<4) -#define M360_TFCR_DMA_SPACE 0x8 - -/* - ************************************************************************* - * Serial Management Controllers * - ************************************************************************* - */ -typedef struct m360SMCparms_ { - rtems_unsigned16 rbase; - rtems_unsigned16 tbase; - rtems_unsigned8 rfcr; - rtems_unsigned8 tfcr; - rtems_unsigned16 mrblr; - rtems_unsigned32 _rstate; - rtems_unsigned32 _pad0; - rtems_unsigned16 _rbptr; - rtems_unsigned16 _pad1; - rtems_unsigned32 _pad2; - rtems_unsigned32 _tstate; - rtems_unsigned32 _pad3; - rtems_unsigned16 _tbptr; - rtems_unsigned16 _pad4; - rtems_unsigned32 _pad5; - union { - struct { - rtems_unsigned16 max_idl; - rtems_unsigned16 _pad0; - rtems_unsigned16 brklen; - rtems_unsigned16 brkec; - rtems_unsigned16 brkcr; - rtems_unsigned16 _r_mask; - } uart; - struct { - rtems_unsigned16 _pad0[5]; - } transparent; - } un; -} m360SMCparms_t; - -/* - * Mode register - */ -#define M360_SMCMR_CLEN(x) ((x)<<11) /* Character length */ -#define M360_SMCMR_2STOP (1<<10) /* 2 stop bits */ -#define M360_SMCMR_PARITY (1<<9) /* Enable parity */ -#define M360_SMCMR_EVEN (1<<8) /* Even parity */ -#define M360_SMCMR_SM_GCI (0<<4) /* GCI Mode */ -#define M360_SMCMR_SM_UART (2<<4) /* UART Mode */ -#define M360_SMCMR_SM_TRANSPARENT (3<<4) /* Transparent Mode */ -#define M360_SMCMR_DM_LOOPBACK (1<<2) /* Local loopback mode */ -#define M360_SMCMR_DM_ECHO (2<<2) /* Echo mode */ -#define M360_SMCMR_TEN (1<<1) /* Enable transmitter */ -#define M360_SMCMR_REN (1<<0) /* Enable receiver */ - -/* - * Event and mask registers (SMCE, SMCM) - */ -#define M360_SMCE_BRK (1<<4) -#define M360_SMCE_BSY (1<<2) -#define M360_SMCE_TX (1<<1) -#define M360_SMCE_RX (1<<0) - -/* - ************************************************************************* - * Serial Peripheral Interface * - ************************************************************************* - */ -typedef struct m360SPIparms_ { - rtems_unsigned16 rbase; - rtems_unsigned16 tbase; - rtems_unsigned8 rfcr; - rtems_unsigned8 tfcr; - rtems_unsigned16 mrblr; - rtems_unsigned32 _rstate; - rtems_unsigned32 _pad0; - rtems_unsigned16 _rbptr; - rtems_unsigned16 _pad1; - rtems_unsigned32 _pad2; - rtems_unsigned32 _tstate; - rtems_unsigned32 _pad3; - rtems_unsigned16 _tbptr; - rtems_unsigned16 _pad4; - rtems_unsigned32 _pad5; -} m360SPIparms_t; - -/* - * Mode register (SPMODE) - */ -#define M360_SPMODE_LOOP (1<<14) /* Local loopback mode */ -#define M360_SPMODE_CI (1<<13) /* Clock invert */ -#define M360_SPMODE_CP (1<<12) /* Clock phase */ -#define M360_SPMODE_DIV16 (1<<11) /* Divide BRGCLK by 16 */ -#define M360_SPMODE_REV (1<<10) /* Reverse data */ -#define M360_SPMODE_MASTER (1<<9) /* SPI is master */ -#define M360_SPMODE_EN (1<<8) /* Enable SPI */ -#define M360_SPMODE_CLEN(x) ((x)<<4) /* Character length */ -#define M360_SPMODE_PM(x) (x) /* Prescaler modulus */ - -/* - * Mode register (SPCOM) - */ -#define M360_SPCOM_STR (1<<7) /* Start transmit */ - -/* - * Event and mask registers (SPIE, SPIM) - */ -#define M360_SPIE_MME (1<<5) /* Multi-master error */ -#define M360_SPIE_TXE (1<<4) /* Tx error */ -#define M360_SPIE_BSY (1<<2) /* Busy condition*/ -#define M360_SPIE_TXB (1<<1) /* Tx buffer */ -#define M360_SPIE_RXB (1<<0) /* Rx buffer */ - -/* - ************************************************************************* - * SDMA (SCC, SMC, SPI) Buffer Descriptors * - ************************************************************************* - */ -typedef struct m360BufferDescriptor_ { - rtems_unsigned16 status; - rtems_unsigned16 length; - volatile void *buffer; -} m360BufferDescriptor_t; - -/* - * Bits in receive buffer descriptor status word - */ -#define M360_BD_EMPTY (1<<15) /* Ethernet, SCC UART, SMC UART, SPI */ -#define M360_BD_WRAP (1<<13) /* Ethernet, SCC UART, SMC UART, SPI */ -#define M360_BD_INTERRUPT (1<<12) /* Ethernet, SCC UART, SMC UART, SPI */ -#define M360_BD_LAST (1<<11) /* Ethernet, SPI */ -#define M360_BD_CONTROL_CHAR (1<<11) /* SCC UART */ -#define M360_BD_FIRST_IN_FRAME (1<<10) /* Ethernet */ -#define M360_BD_ADDRESS (1<<10) /* SCC UART */ -#define M360_BD_CONTINUOUS (1<<9) /* SCC UART, SMC UART, SPI */ -#define M360_BD_MISS (1<<8) /* Ethernet */ -#define M360_BD_IDLE (1<<8) /* SCC UART, SMC UART */ -#define M360_BD_ADDRSS_MATCH (1<<7) /* SCC UART */ -#define M360_BD_LONG (1<<5) /* Ethernet */ -#define M360_BD_BREAK (1<<5) /* SCC UART, SMC UART */ -#define M360_BD_NONALIGNED (1<<4) /* Ethernet */ -#define M360_BD_FRAMING_ERROR (1<<4) /* SCC UART, SMC UART */ -#define M360_BD_SHORT (1<<3) /* Ethernet */ -#define M360_BD_PARITY_ERROR (1<<3) /* SCC UART, SMC UART */ -#define M360_BD_CRC_ERROR (1<<2) /* Ethernet */ -#define M360_BD_OVERRUN (1<<1) /* Ethernet, SCC UART, SMC UART, SPI */ -#define M360_BD_COLLISION (1<<0) /* Ethernet */ -#define M360_BD_CARRIER_LOST (1<<0) /* SCC UART */ -#define M360_BD_MASTER_ERROR (1<<0) /* SPI */ - -/* - * Bits in transmit buffer descriptor status word - * Many bits have the same meaning as those in receiver buffer descriptors. - */ -#define M360_BD_READY (1<<15) /* Ethernet, SCC UART, SMC UART, SPI */ -#define M360_BD_PAD (1<<14) /* Ethernet */ -#define M360_BD_CTS_REPORT (1<<11) /* SCC UART */ -#define M360_BD_TX_CRC (1<<10) /* Ethernet */ -#define M360_BD_DEFER (1<<9) /* Ethernet */ -#define M360_BD_HEARTBEAT (1<<8) /* Ethernet */ -#define M360_BD_PREAMBLE (1<<8) /* SCC UART, SMC UART */ -#define M360_BD_LATE_COLLISION (1<<7) /* Ethernet */ -#define M360_BD_NO_STOP_BIT (1<<7) /* SCC UART */ -#define M360_BD_RETRY_LIMIT (1<<6) /* Ethernet */ -#define M360_BD_RETRY_COUNT(x) (((x)&0x3C)>>2) /* Ethernet */ -#define M360_BD_UNDERRUN (1<<1) /* Ethernet, SPI */ -#define M360_BD_CARRIER_LOST (1<<0) /* Ethernet */ -#define M360_BD_CTS_LOST (1<<0) /* SCC UART */ - -/* - ************************************************************************* - * IDMA Buffer Descriptors * - ************************************************************************* - */ -typedef struct m360IDMABufferDescriptor_ { - rtems_unsigned16 status; - rtems_unsigned16 _pad; - rtems_unsigned32 length; - void *source; - void *destination; -} m360IDMABufferDescriptor_t; - -/* - ************************************************************************* - * RISC Communication Processor Module Command Register (CR) * - ************************************************************************* - */ -#define M360_CR_RST (1<<15) /* Reset communication processor */ -#define M360_CR_OP_INIT_RX_TX (0<<8) /* SCC, SMC UART, SMC GCI, SPI */ -#define M360_CR_OP_INIT_RX (1<<8) /* SCC, SMC UART, SPI */ -#define M360_CR_OP_INIT_TX (2<<8) /* SCC, SMC UART, SPI */ -#define M360_CR_OP_INIT_HUNT (3<<8) /* SCC, SMC UART */ -#define M360_CR_OP_STOP_TX (4<<8) /* SCC, SMC UART */ -#define M360_CR_OP_GR_STOP_TX (5<<8) /* SCC */ -#define M360_CR_OP_INIT_IDMA (5<<8) /* IDMA */ -#define M360_CR_OP_RESTART_TX (6<<8) /* SCC, SMC UART */ -#define M360_CR_OP_CLOSE_RX_BD (7<<8) /* SCC, SMC UART, SPI */ -#define M360_CR_OP_SET_GRP_ADDR (8<<8) /* SCC */ -#define M360_CR_OP_SET_TIMER (8<<8) /* Timer */ -#define M360_CR_OP_GCI_TIMEOUT (9<<8) /* SMC GCI */ -#define M360_CR_OP_RESERT_BCS (10<<8) /* SCC */ -#define M360_CR_OP_GCI_ABORT (10<<8) /* SMC GCI */ -#define M360_CR_CHAN_SCC1 (0<<4) /* Channel selection */ -#define M360_CR_CHAN_SCC2 (4<<4) -#define M360_CR_CHAN_SPI (5<<4) -#define M360_CR_CHAN_TIMER (5<<4) -#define M360_CR_CHAN_SCC3 (8<<4) -#define M360_CR_CHAN_SMC1 (9<<4) -#define M360_CR_CHAN_IDMA1 (9<<4) -#define M360_CR_CHAN_SCC4 (12<<4) -#define M360_CR_CHAN_SMC2 (13<<4) -#define M360_CR_CHAN_IDMA2 (13<<4) -#define M360_CR_FLG (1<<0) /* Command flag */ - -/* - ************************************************************************* - * System Protection Control Register (SYPCR) * - ************************************************************************* - */ -#define M360_SYPCR_SWE (1<<7) /* Software watchdog enable */ -#define M360_SYPCR_SWRI (1<<6) /* Software watchdog reset select */ -#define M360_SYPCR_SWT1 (1<<5) /* Software watchdog timing bit 1 */ -#define M360_SYPCR_SWT0 (1<<4) /* Software watchdog timing bit 0 */ -#define M360_SYPCR_DBFE (1<<3) /* Double bus fault monitor enable */ -#define M360_SYPCR_BME (1<<2) /* Bus monitor external enable */ -#define M360_SYPCR_BMT1 (1<<1) /* Bus monitor timing bit 1 */ -#define M360_SYPCR_BMT0 (1<<0) /* Bus monitor timing bit 0 */ - -/* - ************************************************************************* - * Memory Control Registers * - ************************************************************************* - */ -#define M360_GMR_RCNT(x) ((x)<<24) /* Refresh count */ -#define M360_GMR_RFEN (1<<23) /* Refresh enable */ -#define M360_GMR_RCYC(x) ((x)<<21) /* Refresh cycle length */ -#define M360_GMR_PGS(x) ((x)<<18) /* Page size */ -#define M360_GMR_DPS_32BIT (0<<16) /* DRAM port size */ -#define M360_GMR_DPS_16BIT (1<<16) -#define M360_GMR_DPS_8BIT (2<<16) -#define M360_GMR_DPS_DSACK (3<<16) -#define M360_GMR_WBT40 (1<<15) /* Wait between 040 transfers */ -#define M360_GMR_WBTQ (1<<14) /* Wait between 360 transfers */ -#define M360_GMR_SYNC (1<<13) /* Synchronous external access */ -#define M360_GMR_EMWS (1<<12) /* External master wait state */ -#define M360_GMR_OPAR (1<<11) /* Odd parity */ -#define M360_GMR_PBEE (1<<10) /* Parity bus error enable */ -#define M360_GMR_TSS40 (1<<9) /* TS* sample for 040 */ -#define M360_GMR_NCS (1<<8) /* No CPU space */ -#define M360_GMR_DWQ (1<<7) /* Delay write for 360 */ -#define M360_GMR_DW40 (1<<6) /* Delay write for 040 */ -#define M360_GMR_GAMX (1<<5) /* Global address mux enable */ - -#define M360_MEMC_BR_FC(x) ((x)<<7) /* Function code limit */ -#define M360_MEMC_BR_TRLXQ (1<<6) /* Relax timing requirements */ -#define M360_MEMC_BR_BACK40 (1<<5) /* Burst acknowledge to 040 */ -#define M360_MEMC_BR_CSNT40 (1<<4) /* CS* negate timing for 040 */ -#define M360_MEMC_BR_CSNTQ (1<<3) /* CS* negate timing for 360 */ -#define M360_MEMC_BR_PAREN (1<<2) /* Enable parity checking */ -#define M360_MEMC_BR_WP (1<<1) /* Write Protect */ -#define M360_MEMC_BR_V (1<<0) /* Base/Option register are valid */ - -#define M360_MEMC_OR_TCYC(x) ((x)<<28) /* Cycle length (clocks) */ -#define M360_MEMC_OR_WAITS(x) M360_MEMC_OR_TCYC((x)+1) -#define M360_MEMC_OR_2KB 0x0FFFF800 /* Address range */ -#define M360_MEMC_OR_4KB 0x0FFFF000 -#define M360_MEMC_OR_8KB 0x0FFFE000 -#define M360_MEMC_OR_16KB 0x0FFFC000 -#define M360_MEMC_OR_32KB 0x0FFF8000 -#define M360_MEMC_OR_64KB 0x0FFF0000 -#define M360_MEMC_OR_128KB 0x0FFE0000 -#define M360_MEMC_OR_256KB 0x0FFC0000 -#define M360_MEMC_OR_512KB 0x0FF80000 -#define M360_MEMC_OR_1MB 0x0FF00000 -#define M360_MEMC_OR_2MB 0x0FE00000 -#define M360_MEMC_OR_4MB 0x0FC00000 -#define M360_MEMC_OR_8MB 0x0F800000 -#define M360_MEMC_OR_16MB 0x0F000000 -#define M360_MEMC_OR_32MB 0x0E000000 -#define M360_MEMC_OR_64MB 0x0C000000 -#define M360_MEMC_OR_128MB 0x08000000 -#define M360_MEMC_OR_256MB 0x00000000 -#define M360_MEMC_OR_FCMC(x) ((x)<<7) /* Function code mask */ -#define M360_MEMC_OR_BCYC(x) ((x)<<5) /* Burst cycle length (clocks) */ -#define M360_MEMC_OR_PGME (1<<3) /* Page mode enable */ -#define M360_MEMC_OR_32BIT (0<<1) /* Port size */ -#define M360_MEMC_OR_16BIT (1<<1) -#define M360_MEMC_OR_8BIT (2<<1) -#define M360_MEMC_OR_DSACK (3<<1) -#define M360_MEMC_OR_DRAM (1<<0) /* Dynamic RAM select */ - -/* - ************************************************************************* - * SI Mode Register (SIMODE) * - ************************************************************************* - */ -#define M360_SI_SMC2_BITS 0xFFFF0000 /* All SMC2 bits */ -#define M360_SI_SMC2_TDM (1<<31) /* Multiplexed SMC2 */ -#define M360_SI_SMC2_BRG1 (0<<28) /* SMC2 clock souce */ -#define M360_SI_SMC2_BRG2 (1<<28) -#define M360_SI_SMC2_BRG3 (2<<28) -#define M360_SI_SMC2_BRG4 (3<<28) -#define M360_SI_SMC2_CLK5 (0<<28) -#define M360_SI_SMC2_CLK6 (1<<28) -#define M360_SI_SMC2_CLK7 (2<<28) -#define M360_SI_SMC2_CLK8 (3<<28) -#define M360_SI_SMC1_BITS 0x0000FFFF /* All SMC1 bits */ -#define M360_SI_SMC1_TDM (1<<15) /* Multiplexed SMC1 */ -#define M360_SI_SMC1_BRG1 (0<<12) /* SMC1 clock souce */ -#define M360_SI_SMC1_BRG2 (1<<12) -#define M360_SI_SMC1_BRG3 (2<<12) -#define M360_SI_SMC1_BRG4 (3<<12) -#define M360_SI_SMC1_CLK1 (0<<12) -#define M360_SI_SMC1_CLK2 (1<<12) -#define M360_SI_SMC1_CLK3 (2<<12) -#define M360_SI_SMC1_CLK4 (3<<12) - -/* - ************************************************************************* - * SDMA Configuration Register (SDMA) * - ************************************************************************* - */ -#define M360_SDMA_FREEZE (2<<13) /* Freeze on next bus cycle */ -#define M360_SDMA_SISM_7 (7<<8) /* Normal interrupt service mask */ -#define M360_SDMA_SAID_4 (4<<4) /* Normal arbitration ID */ -#define M360_SDMA_INTE (1<<1) /* SBER interrupt enable */ -#define M360_SDMA_INTB (1<<0) /* SBKP interrupt enable */ - -/* - ************************************************************************* - * Baud (sic) Rate Generators * - ************************************************************************* - */ -#define M360_BRG_RST (1<<17) /* Reset generator */ -#define M360_BRG_EN (1<<16) /* Enable generator */ -#define M360_BRG_EXTC_BRGCLK (0<<14) /* Source is BRGCLK */ -#define M360_BRG_EXTC_CLK2 (1<<14) /* Source is CLK2 pin */ -#define M360_BRG_EXTC_CLK6 (2<<14) /* Source is CLK6 pin */ -#define M360_BRG_ATB (1<<13) /* Autobaud */ -#define M360_BRG_115200 (13<<1) /* Assume 25 MHz clock */ -#define M360_BRG_57600 (26<<1) -#define M360_BRG_38400 (40<<1) -#define M360_BRG_19200 (80<<1) -#define M360_BRG_9600 (162<<1) -#define M360_BRG_4800 (324<<1) -#define M360_BRG_2400 (650<<1) -#define M360_BRG_1200 (1301<<1) -#define M360_BRG_600 (2603<<1) -#define M360_BRG_300 ((324<<1) | 1) -#define M360_BRG_150 ((650<<1) | 1) -#define M360_BRG_75 ((1301<<1) | 1) - -/* - ************************************************************************* - * MC68360 DUAL-PORT RAM AND REGISTERS * - ************************************************************************* - */ -typedef struct m360_ { - /* - * Dual-port RAM - */ - rtems_unsigned8 dpram0[0x400]; /* Microcode program */ - rtems_unsigned8 dpram1[0x200]; - rtems_unsigned8 dpram2[0x100]; /* Microcode scratch */ - rtems_unsigned8 dpram3[0x100]; /* Not on REV A or B masks */ - rtems_unsigned8 _rsv0[0xC00-0x800]; - m360SCCENparms_t scc1p; - rtems_unsigned8 _rsv1[0xCB0-0xC00-sizeof(m360SCCENparms_t)]; - m360MiscParms_t miscp; - rtems_unsigned8 _rsv2[0xD00-0xCB0-sizeof(m360MiscParms_t)]; - m360SCCparms_t scc2p; - rtems_unsigned8 _rsv3[0xD80-0xD00-sizeof(m360SCCparms_t)]; - m360SPIparms_t spip; - rtems_unsigned8 _rsv4[0xDB0-0xD80-sizeof(m360SPIparms_t)]; - m360TimerParms_t tmp; - rtems_unsigned8 _rsv5[0xE00-0xDB0-sizeof(m360TimerParms_t)]; - m360SCCparms_t scc3p; - rtems_unsigned8 _rsv6[0xE70-0xE00-sizeof(m360SCCparms_t)]; - m360IDMAparms_t idma1p; - rtems_unsigned8 _rsv7[0xE80-0xE70-sizeof(m360IDMAparms_t)]; - m360SMCparms_t smc1p; - rtems_unsigned8 _rsv8[0xF00-0xE80-sizeof(m360SMCparms_t)]; - m360SCCparms_t scc4p; - rtems_unsigned8 _rsv9[0xF70-0xF00-sizeof(m360SCCparms_t)]; - m360IDMAparms_t idma2p; - rtems_unsigned8 _rsv10[0xF80-0xF70-sizeof(m360IDMAparms_t)]; - m360SMCparms_t smc2p; - rtems_unsigned8 _rsv11[0x1000-0xF80-sizeof(m360SMCparms_t)]; - - /* - * SIM Block - */ - rtems_unsigned32 mcr; - rtems_unsigned32 _pad00; - rtems_unsigned8 avr; - rtems_unsigned8 rsr; - rtems_unsigned16 _pad01; - rtems_unsigned8 clkocr; - rtems_unsigned8 _pad02; - rtems_unsigned16 _pad03; - rtems_unsigned16 pllcr; - rtems_unsigned16 _pad04; - rtems_unsigned16 cdvcr; - rtems_unsigned16 pepar; - rtems_unsigned32 _pad05[2]; - rtems_unsigned16 _pad06; - rtems_unsigned8 sypcr; - rtems_unsigned8 swiv; - rtems_unsigned16 _pad07; - rtems_unsigned16 picr; - rtems_unsigned16 _pad08; - rtems_unsigned16 pitr; - rtems_unsigned16 _pad09; - rtems_unsigned8 _pad10; - rtems_unsigned8 swsr; - rtems_unsigned32 bkar; - rtems_unsigned32 bcar; - rtems_unsigned32 _pad11[2]; - - /* - * MEMC Block - */ - rtems_unsigned32 gmr; - rtems_unsigned16 mstat; - rtems_unsigned16 _pad12; - rtems_unsigned32 _pad13[2]; - m360MEMCRegisters_t memc[8]; - rtems_unsigned8 _pad14[0xF0-0xD0]; - rtems_unsigned8 _pad15[0x100-0xF0]; - rtems_unsigned8 _pad16[0x500-0x100]; - - /* - * IDMA1 Block - */ - rtems_unsigned16 iccr; - rtems_unsigned16 _pad17; - rtems_unsigned16 cmr1; - rtems_unsigned16 _pad18; - rtems_unsigned32 sapr1; - rtems_unsigned32 dapr1; - rtems_unsigned32 bcr1; - rtems_unsigned8 fcr1; - rtems_unsigned8 _pad19; - rtems_unsigned8 cmar1; - rtems_unsigned8 _pad20; - rtems_unsigned8 csr1; - rtems_unsigned8 _pad21; - rtems_unsigned16 _pad22; - - /* - * SDMA Block - */ - rtems_unsigned8 sdsr; - rtems_unsigned8 _pad23; - rtems_unsigned16 sdcr; - rtems_unsigned32 sdar; - - /* - * IDMA2 Block - */ - rtems_unsigned16 _pad24; - rtems_unsigned16 cmr2; - rtems_unsigned32 sapr2; - rtems_unsigned32 dapr2; - rtems_unsigned32 bcr2; - rtems_unsigned8 fcr2; - rtems_unsigned8 _pad26; - rtems_unsigned8 cmar2; - rtems_unsigned8 _pad27; - rtems_unsigned8 csr2; - rtems_unsigned8 _pad28; - rtems_unsigned16 _pad29; - rtems_unsigned32 _pad30; - - /* - * CPIC Block - */ - rtems_unsigned32 cicr; - rtems_unsigned32 cipr; - rtems_unsigned32 cimr; - rtems_unsigned32 cisr; - - /* - * Parallel I/O Block - */ - rtems_unsigned16 padir; - rtems_unsigned16 papar; - rtems_unsigned16 paodr; - rtems_unsigned16 padat; - rtems_unsigned32 _pad31[2]; - rtems_unsigned16 pcdir; - rtems_unsigned16 pcpar; - rtems_unsigned16 pcso; - rtems_unsigned16 pcdat; - rtems_unsigned16 pcint; - rtems_unsigned16 _pad32; - rtems_unsigned32 _pad33[5]; - - /* - * TIMER Block - */ - rtems_unsigned16 tgcr; - rtems_unsigned16 _pad34; - rtems_unsigned32 _pad35[3]; - rtems_unsigned16 tmr1; - rtems_unsigned16 tmr2; - rtems_unsigned16 trr1; - rtems_unsigned16 trr2; - rtems_unsigned16 tcr1; - rtems_unsigned16 tcr2; - rtems_unsigned16 tcn1; - rtems_unsigned16 tcn2; - rtems_unsigned16 tmr3; - rtems_unsigned16 tmr4; - rtems_unsigned16 trr3; - rtems_unsigned16 trr4; - rtems_unsigned16 tcr3; - rtems_unsigned16 tcr4; - rtems_unsigned16 tcn3; - rtems_unsigned16 tcn4; - rtems_unsigned16 ter1; - rtems_unsigned16 ter2; - rtems_unsigned16 ter3; - rtems_unsigned16 ter4; - rtems_unsigned32 _pad36[2]; - - /* - * CP Block - */ - rtems_unsigned16 cr; - rtems_unsigned16 _pad37; - rtems_unsigned16 rccr; - rtems_unsigned16 _pad38; - rtems_unsigned32 _pad39[3]; - rtems_unsigned16 _pad40; - rtems_unsigned16 rter; - rtems_unsigned16 _pad41; - rtems_unsigned16 rtmr; - rtems_unsigned32 _pad42[5]; - - /* - * BRG Block - */ - rtems_unsigned32 brgc1; - rtems_unsigned32 brgc2; - rtems_unsigned32 brgc3; - rtems_unsigned32 brgc4; - - /* - * SCC Block - */ - m360SCCRegisters_t scc1; - m360SCCRegisters_t scc2; - m360SCCRegisters_t scc3; - m360SCCRegisters_t scc4; - - /* - * SMC Block - */ - m360SMCRegisters_t smc1; - m360SMCRegisters_t smc2; - - /* - * SPI Block - */ - rtems_unsigned16 spmode; - rtems_unsigned16 _pad43[2]; - rtems_unsigned8 spie; - rtems_unsigned8 _pad44; - rtems_unsigned16 _pad45; - rtems_unsigned8 spim; - rtems_unsigned8 _pad46[2]; - rtems_unsigned8 spcom; - rtems_unsigned16 _pad47[2]; - - /* - * PIP Block - */ - rtems_unsigned16 pipc; - rtems_unsigned16 _pad48; - rtems_unsigned16 ptpr; - rtems_unsigned32 pbdir; - rtems_unsigned32 pbpar; - rtems_unsigned16 _pad49; - rtems_unsigned16 pbodr; - rtems_unsigned32 pbdat; - rtems_unsigned32 _pad50[6]; - - /* - * SI Block - */ - rtems_unsigned32 simode; - rtems_unsigned8 sigmr; - rtems_unsigned8 _pad51; - rtems_unsigned8 sistr; - rtems_unsigned8 sicmr; - rtems_unsigned32 _pad52; - rtems_unsigned32 sicr; - rtems_unsigned16 _pad53; - rtems_unsigned16 sirp[2]; - rtems_unsigned16 _pad54; - rtems_unsigned32 _pad55[2]; - rtems_unsigned8 siram[256]; -} m360_t; - -extern volatile m360_t m360; - -#endif /* __MC68360_h */ diff --git a/c/src/exec/score/cpu/m68k/m68k.h b/c/src/exec/score/cpu/m68k/m68k.h deleted file mode 100644 index 5f4c3597b5..0000000000 --- a/c/src/exec/score/cpu/m68k/m68k.h +++ /dev/null @@ -1,363 +0,0 @@ -/* m68k.h - * - * This include file contains information pertaining to the Motorola - * m68xxx processor family. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __M68k_h -#define __M68k_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section contains the information required to build - * RTEMS for a particular member of the Motorola MC68xxx - * family. It does this by setting variables to indicate - * which implementation dependent features are present in - * a particular member of the family. - * - * Currently recognized: - * -m68000 - * -m68000 -msoft-float - * -m68020 - * -m68020 -msoft-float - * -m68030 - * -m68040 -msoft-float - * -m68040 - * -m68040 -msoft-float - * -m68060 - * -m68060 -msoft-float - * -m68302 (no FP) (deprecated, use -m68000) - * -m68332 (no FP) (deprecated, use -mcpu32) - * -mcpu32 (no FP) - * -m5200 (no FP) - * - * As of gcc 2.8.1 and egcs 1.1, there is no distinction made between - * the CPU32 and CPU32+. The option -mcpu32 generates code which can - * be run on either core. RTEMS distinguishes between these two cores - * because they have different alignment rules which impact performance. - * If you are using a CPU32+, then the symbol RTEMS__mcpu32p__ should - * be defined in your custom file (see make/custom/gen68360.cfg for an - * example of how to do this. If gcc ever distinguishes between these - * two cores, then RTEMS__mcpu32p__ usage will be replaced with the - * appropriate compiler defined predefine. - * - * Here is some information on the 040 variants (courtesy of Doug McBride, - * mcbride@rodin.colorado.edu): - * - * "The 68040 is a superset of the 68EC040 and the 68LC040. The - * 68EC040 and 68LC040 do not have FPU's. The 68LC040 and the - * 68EC040 have renamed the DLE pin as JS0 which must be tied to - * Gnd or Vcc. The 68EC040 has renamed the MDIS pin as JS1. The - * 68EC040 has access control units instead of memory management units. - * The 68EC040 should not have the PFLUSH or PTEST instructions executed - * (cause an indeterminate result). The 68EC040 and 68LC040 do not - * implement the DLE or multiplexed bus modes. The 68EC040 does not - * implement the output buffer impedance selection mode of operation." - * - * M68K_HAS_EXTB_L is used to enable/disable usage of the extb.l instruction - * which is not available for 68000 or 68ec000 cores (68000, 68001, 68008, - * 68010, 68302, 68306, 68307). This instruction is available on the 68020 - * up and the cpu32 based models. - * - * M68K_HAS_MISALIGNED is non-zero if the CPU allows byte-misaligned - * data access (68020, 68030, 68040, 68060, CPU32+). - * - * NOTE: - * Eventually it would be nice to evaluate doing a lot of this section - * by having each model specify which core it uses and then go from there. - */ - -#if defined(__mc68020__) - -#define CPU_MODEL_NAME "m68020" -#define M68K_HAS_VBR 1 -#define M68K_HAS_SEPARATE_STACKS 1 -#define M68K_HAS_BFFFO 1 -#define M68K_HAS_PREINDEXING 1 -#define M68K_HAS_EXTB_L 1 -#define M68K_HAS_MISALIGNED 1 -# if defined (__HAVE_68881__) -# define M68K_HAS_FPU 1 -# define M68K_HAS_FPSP_PACKAGE 0 -# else -# define M68K_HAS_FPU 0 -# define M68K_HAS_FPSP_PACKAGE 0 -# endif - -#elif defined(__mc68030__) - -#define CPU_MODEL_NAME "m68030" -#define M68K_HAS_VBR 1 -#define M68K_HAS_SEPARATE_STACKS 1 -#define M68K_HAS_BFFFO 1 -#define M68K_HAS_PREINDEXING 1 -#define M68K_HAS_EXTB_L 1 -#define M68K_HAS_MISALIGNED 1 -# if defined (__HAVE_68881__) -# define M68K_HAS_FPU 1 -# define M68K_HAS_FPSP_PACKAGE 0 -# else -# define M68K_HAS_FPU 0 -# define M68K_HAS_FPSP_PACKAGE 0 -# endif - -#elif defined(__mc68040__) - -#define CPU_MODEL_NAME "m68040" -#define M68K_HAS_VBR 1 -#define M68K_HAS_SEPARATE_STACKS 1 -#define M68K_HAS_BFFFO 1 -#define M68K_HAS_PREINDEXING 1 -#define M68K_HAS_EXTB_L 1 -#define M68K_HAS_MISALIGNED 1 -# if defined (__HAVE_68881__) -# define M68K_HAS_FPU 1 -# define M68K_HAS_FPSP_PACKAGE 1 -# else -# define M68K_HAS_FPU 0 -# define M68K_HAS_FPSP_PACKAGE 0 -# endif - -#elif defined(__mc68060__) - -#define CPU_MODEL_NAME "m68060" -#define M68K_HAS_VBR 1 -#define M68K_HAS_SEPARATE_STACKS 0 -#define M68K_HAS_BFFFO 1 -#define M68K_HAS_PREINDEXING 1 -#define M68K_HAS_EXTB_L 1 -#define M68K_HAS_MISALIGNED 1 -# if defined (__HAVE_68881__) -# define M68K_HAS_FPU 1 -# define M68K_HAS_FPSP_PACKAGE 1 -# else -# define M68K_HAS_FPU 0 -# define M68K_HAS_FPSP_PACKAGE 0 -# endif - -#elif defined(__mc68302__) -#define CPU_MODEL_NAME "m68302" -#define M68K_HAS_VBR 0 -#define M68K_HAS_SEPARATE_STACKS 0 -#define M68K_HAS_BFFFO 0 -#define M68K_HAS_PREINDEXING 0 -#define M68K_HAS_EXTB_L 0 -#define M68K_HAS_MISALIGNED 0 -#define M68K_HAS_FPU 0 -#define M68K_HAS_FPSP_PACKAGE 0 - - /* gcc and egcs do not distinguish between CPU32 and CPU32+ */ -#elif defined(RTEMS__mcpu32p__) - -#define CPU_MODEL_NAME "mcpu32+" -#define M68K_HAS_VBR 1 -#define M68K_HAS_SEPARATE_STACKS 0 -#define M68K_HAS_BFFFO 0 -#define M68K_HAS_PREINDEXING 1 -#define M68K_HAS_EXTB_L 1 -#define M68K_HAS_MISALIGNED 1 -#define M68K_HAS_FPU 0 -#define M68K_HAS_FPSP_PACKAGE 0 - -#elif defined(__mcpu32__) - -#define CPU_MODEL_NAME "mcpu32" -#define M68K_HAS_VBR 1 -#define M68K_HAS_SEPARATE_STACKS 0 -#define M68K_HAS_BFFFO 0 -#define M68K_HAS_PREINDEXING 1 -#define M68K_HAS_EXTB_L 1 -#define M68K_HAS_MISALIGNED 0 -#define M68K_HAS_FPU 0 -#define M68K_HAS_FPSP_PACKAGE 0 - -#elif defined(__mcf5200__) -/* Motorola ColdFire V2 core - RISC/68020 hybrid */ -#define CPU_MODEL_NAME "m5200" -#define M68K_HAS_VBR 1 -#define M68K_HAS_BFFFO 0 -#define M68K_HAS_SEPARATE_STACKS 0 -#define M68K_HAS_PREINDEXING 0 -#define M68K_HAS_EXTB_L 1 -#define M68K_HAS_MISALIGNED 1 -#define M68K_HAS_FPU 0 -#define M68K_HAS_FPSP_PACKAGE 0 -#define M68K_COLDFIRE_ARCH 1 - -#elif defined(__mc68000__) - -#define CPU_MODEL_NAME "m68000" -#define M68K_HAS_VBR 0 -#define M68K_HAS_SEPARATE_STACKS 0 -#define M68K_HAS_BFFFO 0 -#define M68K_HAS_PREINDEXING 0 -#define M68K_HAS_EXTB_L 0 -#define M68K_HAS_MISALIGNED 0 -# if defined (__HAVE_68881__) -# define M68K_HAS_FPU 1 -# define M68K_HAS_FPSP_PACKAGE 0 -# else -# define M68K_HAS_FPU 0 -# define M68K_HAS_FPSP_PACKAGE 0 -# endif - -#else - -#error "Unsupported CPU model -- are you sure you're running a 68k compiler?" - -#endif - -/* - * If the above did not specify a ColdFire architecture, then set - * this flag to indicate that it is not a ColdFire CPU. - */ - -#if !defined(M68K_COLDFIRE_ARCH) -#define M68K_COLDFIRE_ARCH 0 -#endif - -/* - * Define the name of the CPU family. - */ - -#if ( M68K_COLDFIRE_ARCH == 1 ) - #define CPU_NAME "Motorola ColdFire" -#else - #define CPU_NAME "Motorola MC68xxx" -#endif - -#ifndef ASM - -#if ( M68K_COLDFIRE_ARCH == 1 ) -#define m68k_disable_interrupts( _level ) \ - do { register unsigned32 _tmpsr = 0x0700; \ - asm volatile ( "move.w %%sr,%0\n\t" \ - "or.l %0,%1\n\t" \ - "move.w %1,%%sr" \ - : "=d" (_level), "=d"(_tmpsr) : "1"(_tmpsr) ); \ - } while( 0 ) -#else -#define m68k_disable_interrupts( _level ) \ - asm volatile ( "move.w %%sr,%0\n\t" \ - "or.w #0x0700,%%sr" \ - : "=d" (_level)) -#endif - -#define m68k_enable_interrupts( _level ) \ - asm volatile ( "move.w %0,%%sr " : : "d" (_level)); - -#if ( M68K_COLDFIRE_ARCH == 1 ) -#define m68k_flash_interrupts( _level ) \ - do { register unsigned32 _tmpsr = 0x0700; \ - asm volatile ( "move.w %2,%%sr\n\t" \ - "or.l %2,%1\n\t" \ - "move.w %1,%%sr" \ - : "=d"(_tmpsr) : "0"(_tmpsr), "d"(_level) ); \ - } while( 0 ) -#else -#define m68k_flash_interrupts( _level ) \ - asm volatile ( "move.w %0,%%sr\n\t" \ - "or.w #0x0700,%%sr" \ - : : "d" (_level)) -#endif - -#define m68k_get_interrupt_level( _level ) \ - do { \ - register unsigned32 _tmpsr; \ - \ - asm volatile( "move.w %%sr,%0" : "=d" (_tmpsr)); \ - _level = (_tmpsr & 0x0700) >> 8; \ - } while (0) - -#define m68k_set_interrupt_level( _newlevel ) \ - do { \ - register unsigned32 _tmpsr; \ - \ - asm volatile( "move.w %%sr,%0" : "=d" (_tmpsr)); \ - _tmpsr = (_tmpsr & 0xf8ff) | ((_newlevel) << 8); \ - asm volatile( "move.w %0,%%sr" : : "d" (_tmpsr)); \ - } while (0) - -#if ( M68K_HAS_VBR == 1 && M68K_COLDFIRE_ARCH == 0 ) -#define m68k_get_vbr( vbr ) \ - asm volatile ( "movec %%vbr,%0 " : "=r" (vbr)) - -#define m68k_set_vbr( vbr ) \ - asm volatile ( "movec %0,%%vbr " : : "r" (vbr)) - -#elif ( M68K_COLDFIRE_ARCH == 1 ) -#define m68k_get_vbr( _vbr ) _vbr = (void *)_VBR - -#define m68k_set_vbr( _vbr ) \ - asm volatile ("move.l %%a7,%%d1 \n\t" \ - "move.l %0,%%a7\n\t" \ - "movec %%a7,%%vbr\n\t" \ - "move.l %%d1,%%a7\n\t" \ - : : "d" (_vbr) : "d1" ); - -#else -#define m68k_get_vbr( _vbr ) _vbr = (void *)_VBR -#define m68k_set_vbr( _vbr ) -#endif - -/* - * The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. - */ - -static inline unsigned int m68k_swap_u32( - unsigned int value -) -{ - unsigned int swapped = value; - - asm volatile( "rorw #8,%0" : "=d" (swapped) : "0" (swapped) ); - asm volatile( "swap %0" : "=d" (swapped) : "0" (swapped) ); - asm volatile( "rorw #8,%0" : "=d" (swapped) : "0" (swapped) ); - - return( swapped ); -} - -static inline unsigned int m68k_swap_u16( - unsigned int value -) -{ - unsigned short swapped = value; - - asm volatile( "rorw #8,%0" : "=d" (swapped) : "0" (swapped) ); - - return( swapped ); -} - -/* XXX this is only valid for some m68k family members and should be fixed */ - -#define m68k_enable_caching() \ - { register unsigned32 _ctl=0x01; \ - asm volatile ( "movec %0,%%cacr" \ - : "=d" (_ctl) : "0" (_ctl) ); \ - } - -#define CPU_swap_u32( value ) m68k_swap_u32( value ) -#define CPU_swap_u16( value ) m68k_swap_u16( value ) - -#endif /* !ASM */ - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/m68k/m68ktypes.h b/c/src/exec/score/cpu/m68k/m68ktypes.h deleted file mode 100644 index 6592d36187..0000000000 --- a/c/src/exec/score/cpu/m68k/m68ktypes.h +++ /dev/null @@ -1,58 +0,0 @@ -/* m68ktypes.h - * - * This include file contains type definitions pertaining to the Motorola - * m68xxx processor family. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __M68k_TYPES_h -#define __M68k_TYPES_h - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section defines the basic types for this processor. - */ - -typedef unsigned char unsigned8; /* unsigned 8-bit integer */ -typedef unsigned short unsigned16; /* unsigned 16-bit integer */ -typedef unsigned int unsigned32; /* unsigned 32-bit integer */ -typedef unsigned long long unsigned64; /* unsigned 64-bit integer */ - -typedef unsigned16 Priority_Bit_map_control; - -typedef signed char signed8; /* 8-bit signed integer */ -typedef signed short signed16; /* 16-bit signed integer */ -typedef signed int signed32; /* 32-bit signed integer */ -typedef signed long long signed64; /* 64 bit signed integer */ - -typedef unsigned32 boolean; /* Boolean value */ - -typedef float single_precision; /* single precision float */ -typedef double double_precision; /* double precision float */ - -typedef void m68k_isr; - -typedef void ( *m68k_isr_entry )( void ); - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/m68k/memcpy.c b/c/src/exec/score/cpu/m68k/memcpy.c deleted file mode 100644 index 3948411f4b..0000000000 --- a/c/src/exec/score/cpu/m68k/memcpy.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * C library memcpy routine - * - * This routine has code to optimize performance on the CPU32+ - * and another version for other 68k machines. - * - * It could be optimized more for machines with MOVE16 instructions. - * - * The routine is placed in this source directory to ensure that it - * is picked up by all applications. - * - * W. Eric Norum - * Saskatchewan Accelerator Laboratory - * University of Saskatchewan - * Saskatoon, Saskatchewan, CANADA - * eric@skatter.usask.ca - */ - -#include <string.h> -#include <rtems/score/m68k.h> - -#if defined(__mcpu32__) -#define COPYSETUP(n) n-- -#define COPY(to,from,n,size) \ - asm volatile ("1:\n" \ - "\tmove." size " (%0)+,(%1)+\n" \ - "\tdbf %2,1b\n" \ - "\tsub.l #0x10000,%2\n" \ - "\tbpl.b 1b\n" : \ - "=a" (from), "=a" (to), "=d" (n) :\ - "0" (from), "1" (to), "2" (n) : \ - "cc", "memory") -#else -#define COPYSETUP(n) -#define COPY(to,from,n,size) \ - asm volatile ("1:\n" \ - "\tmove." size " (%0)+,(%1)+\n" \ - "\tsubq.l #1,%2\n\tbne.b 1b\n" : \ - "=a" (from), "=a" (to), "=d" (n) :\ - "0" (from), "1" (to), "2" (n) : \ - "cc", "memory") -#endif - -void * -memcpy(void *s1, const void *s2, size_t n) -{ - char *p1 = s1; - const char *p2 = s2; - - if (n) { - if (n < 16) { - COPYSETUP (n); - COPY (p1, p2, n, "b"); - } - else { - int nbyte; - int nl; - nbyte = (int)p1 & 0x3; - if (nbyte) { - nbyte = 4 - nbyte; - n -= nbyte; - COPYSETUP (nbyte); - COPY (p1, p2, nbyte, "b"); - } -#if (M68K_HAS_MISALIGNED == 0) - /* - * Take care of machines that can't - * handle misaligned references. - */ - if ((int)p2 & 0x1) { - COPYSETUP (n); - COPY (p1, p2, n, "b"); - return s1; - } -#endif - nl = (unsigned int)n >> 2; - COPYSETUP (nl); - COPY (p1, p2, nl, "l"); - nbyte = (int)n & 0x3; - if (nbyte) { - COPYSETUP (nbyte); - COPY (p1, p2, nbyte, "b"); - } - } - } - return s1; -} diff --git a/c/src/exec/score/cpu/m68k/qsm.h b/c/src/exec/score/cpu/m68k/qsm.h deleted file mode 100644 index e1bf33bc12..0000000000 --- a/c/src/exec/score/cpu/m68k/qsm.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - *------------------------------------------------------------------- - * - * QSM -- Queued Serial Module - * - * The QSM contains two serial interfaces: (a) the queued serial - * peripheral interface (QSPI) and the serial communication interface - * (SCI). The QSPI provides peripheral expansion and/or interprocessor - * communication through a full-duplex, synchronous, three-wire bus. A - * self contained RAM queue permits serial data transfers without CPU - * intervention and automatic continuous sampling. The SCI provides a - * standard non-return to zero mark/space format with wakeup functions - * to allow the CPU to run uninterrupted until woken - * - * For more information, refer to Motorola's "Modular Microcontroller - * Family Queued Serial Module Reference Manual" (Motorola document - * QSMRM/AD). - * - * This file has been created by John S. Gwynne for support of - * Motorola's 68332 MCU in the efi332 project. - * - * Redistribution and use in source and binary forms are permitted - * provided that the following conditions are met: - * 1. Redistribution of source code and documentation must retain - * the above authorship, this list of conditions and the - * following disclaimer. - * 2. The name of the author may not be used to endorse or promote - * products derived from this software without specific prior - * written permission. - * - * This software is provided "AS IS" without warranty of any kind, - * either expressed or implied, including, but not limited to, the - * implied warranties of merchantability, title and fitness for a - * particular purpose. - * - *------------------------------------------------------------------ - * - * $Id$ - */ - -#ifndef _QSM_H_ -#define _QSM_H_ - - -#include <efi332.h> - - -/* SAM-- shift and mask */ -#undef SAM -#define SAM(a,b,c) ((a << b) & c) - - -/* QSM_CRB (QSM Control Register Block) base address of the QSM - control registers */ -#if SIM_MM == 0 -#define QSM_CRB 0x7ffc00 -#else -#undef SIM_MM -#define SIM_MM 1 -#define QSM_CRB 0xfffc00 -#endif - - -#define QSMCR (volatile unsigned short int * const)(0x00 + QSM_CRB) - /* QSM Configuration Register */ -#define STOP 0x8000 /* Stop Enable */ -#define FRZ 0x6000 /* Freeze Control */ -#define SUPV 0x0080 /* Supervisor/Unrestricted */ -#define IARB 0x000f /* Inerrupt Arbitration */ - - -#define QTEST (volatile unsigned short int * const)(0x02 + QSM_CRB) - /* QSM Test Register */ -/* Used only for factor testing */ - - -#define QILR (volatile unsigned char * const)(0x04 + QSM_CRB) - /* QSM Interrupt Level Register */ -#define ILQSPI 0x38 /* Interrupt Level for QSPI */ -#define ILSCI 0x07 /* Interrupt Level for SCI */ - - -#define QIVR (volatile unsigned char * const)(0x05 + QSM_CRB) - /* QSM Interrupt Vector Register */ -#define INTV 0xff /* Interrupt Vector Number */ - - -#define SCCR0 (volatile unsigned short int * const)(0x08 + QSM_CRB) - /* SCI Control Register 0 */ -#define SCBR 0x1fff /* SCI Baud Rate */ - - -#define SCCR1 (volatile unsigned short int * const)(0x0a + QSM_CRB) - /* SCI Control Register 1 */ -#define LOOPS 0x4000 /* Loop Mode */ -#define WOMS 0x2000 /* Wired-OR Mode for SCI Pins */ -#define ILT 0x1000 /* Idle-Line Detect Type */ -#define PT 0x0800 /* Parity Type */ -#define PE 0x0400 /* Parity Enable */ -#define M 0x0200 /* Mode Select */ -#define WAKE 0x0100 /* Wakeup by Address Mark */ -#define TIE 0x0080 /* Transmit Complete Interrupt Enable */ -#define TCIE 0x0040 /* Transmit Complete Interrupt Enable */ -#define RIE 0x0020 /* Receiver Interrupt Enable */ -#define ILIE 0x0010 /* Idle-Line Interrupt Enable */ -#define TE 0x0008 /* Transmitter Enable */ -#define RE 0x0004 /* Receiver Enable */ -#define RWU 0x0002 /* Receiver Wakeup */ -#define SBK 0x0001 /* Send Break */ - - -#define SCSR (volatile unsigned short int * const)(0x0c + QSM_CRB) - /* SCI Status Register */ -#define TDRE 0x0100 /* Transmit Data Register Empty */ -#define TC 0x0080 /* Transmit Complete */ -#define RDRF 0x0040 /* Receive Data Register Full */ -#define RAF 0x0020 /* Receiver Active */ -#define IDLE 0x0010 /* Idle-Line Detected */ -#define OR 0x0008 /* Overrun Error */ -#define NF 0x0004 /* Noise Error Flag */ -#define FE 0x0002 /* Framing Error */ -#define PF 0x0001 /* Parity Error */ - - -#define SCDR (volatile unsigned short int * const)(0x0e + QSM_CRB) - /* SCI Data Register */ - - -#define PORTQS (volatile unsigned char * const)(0x15 + QSM_CRB) - /* Port QS Data Register */ - -#define PQSPAR (volatile unsigned char * const)(0x16 + QSM_CRB) - /* PORT QS Pin Assignment Rgister */ -/* Any bit cleared (zero) defines the corresponding pin to be an I/O - pin. Any bit set defines the corresponding pin to be a QSPI - signal. */ -/* note: PQS2 is a digital I/O pin unless the SPI is enabled in which - case it becomes the SPI serial clock SCK. */ -/* note: PQS7 is a digital I/O pin unless the SCI transmitter is - enabled in which case it becomes the SCI serial output TxD. */ -#define QSMFun 0x0 -#define QSMDis 0x1 -/* - * PQSPAR Field | QSM Function | Discrete I/O pin - *------------------+--------------+------------------ */ -#define PQSPA0 0 /* MISO | PQS0 */ -#define PQSPA1 1 /* MOSI | PQS1 */ -#define PQSPA2 2 /* SCK | PQS2 (see note)*/ -#define PQSPA3 3 /* PCSO/!SS | PQS3 */ -#define PQSPA4 4 /* PCS1 | PQS4 */ -#define PQSPA5 5 /* PCS2 | PQS5 */ -#define PQSPA6 6 /* PCS3 | PQS6 */ -#define PQSPA7 7 /* TxD | PQS7 (see note)*/ - - -#define DDRQS (volatile unsigned char * const)(0x17 + QSM_CRB) - /* PORT QS Data Direction Register */ -/* Clearing a bit makes the corresponding pin an input; setting a bit - makes the pin an output. */ - - -#define SPCR0 (volatile unsigned short int * const)(0x18 + QSM_CRB) - /* QSPI Control Register 0 */ -#define MSTR 0x8000 /* Master/Slave Mode Select */ -#define WOMQ 0x4000 /* Wired-OR Mode for QSPI Pins */ -#define BITS 0x3c00 /* Bits Per Transfer */ -#define CPOL 0x0200 /* Clock Polarity */ -#define CPHA 0x0100 /* Clock Phase */ -#define SPBR 0x00ff /* Serial Clock Baud Rate */ - - -#define SPCR1 (volatile unsigned short int * const)(0x1a + QSM_CRB) - /* QSPI Control Register 1 */ -#define SPE 0x8000 /* QSPI Enable */ -#define DSCKL 0x7f00 /* Delay before SCK */ -#define DTL 0x00ff /* Length of Delay after Transfer */ - - -#define SPCR2 (volatile unsigned short int * const)(0x1c + QSM_CRB) - /* QSPI Control Register 2 */ -#define SPIFIE 0x8000 /* SPI Finished Interrupt Enable */ -#define WREN 0x4000 /* Wrap Enable */ -#define WRTO 0x2000 /* Wrap To */ -#define ENDQP 0x0f00 /* Ending Queue Pointer */ -#define NEWQP 0x000f /* New Queue Pointer Value */ - - -#define SPCR3 (volatile unsigned char * const)(0x1e + QSM_CRB) - /* QSPI Control Register 3 */ -#define LOOPQ 0x0400 /* QSPI Loop Mode */ -#define HMIE 0x0200 /* HALTA and MODF Interrupt Enable */ -#define HALT 0x0100 /* Halt */ - - -#define SPSR (volatile unsigned char * const)(0x1f + QSM_CRB) - /* QSPI Status Register */ -#define SPIF 0x0080 /* QSPI Finished Flag */ -#define MODF 0x0040 /* Mode Fault Flag */ -#define HALTA 0x0020 /* Halt Acknowlwdge Flag */ -#define CPTQP x0000f /* Completed Queue Pointer */ - -#define QSPIRR (volatile unsigned char * const)(0x100 + QSM_CRB) - /* QSPI Receive Data RAM */ -#define QSPITR (volatile unsigned char * const)(0x120 + QSM_CRB) - /* QSPI Transmit Data RAM */ -#define QSPIcR (volatile unsigned char * const)(0x140 + QSM_CRB) - /* QSPI Command RAM */ - -#endif /* _QSM_H_ */ diff --git a/c/src/exec/score/cpu/m68k/rtems.s b/c/src/exec/score/cpu/m68k/rtems.s deleted file mode 100644 index e8cba8204c..0000000000 --- a/c/src/exec/score/cpu/m68k/rtems.s +++ /dev/null @@ -1,52 +0,0 @@ -/* rtems.s - * - * This file contains the single entry point code for - * the m68k implementation of RTEMS. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - - -#include <asm.h> - -/* - * There seems to be no reason to have two versions of this. - * The following version should work across the entire family. - * The worst assumption is that gcc will put entry in a scratch - * register and not screw up the stack. - * - * NOTE: This is a 68020 version: - * - * jmpl @(%%d0:l:4)@(__Entry_points) - */ - - EXTERN (_Entry_points) - - BEGIN_CODE - - .align 4 - .global SYM (RTEMS) - -SYM (RTEMS): - moveal SYM (_Entry_points), a0 - lsll #2, d0 - addal d0, a0 - -#if (M68K_COLDFIRE_ARCH == 0) - moveal @(a0),a0 - jmpl @(a0) -#else - moveal (a0),a0 - jmpl (a0) -#endif - - END_CODE -END diff --git a/c/src/exec/score/cpu/m68k/sim.h b/c/src/exec/score/cpu/m68k/sim.h deleted file mode 100644 index d70f56d360..0000000000 --- a/c/src/exec/score/cpu/m68k/sim.h +++ /dev/null @@ -1,342 +0,0 @@ -/* - *------------------------------------------------------------------- - * - * SIM -- System Integration Module - * - * The system integration module (SIM) is used on many Motorola 16- - * and 32-bit MCUs for the following functions: - * - * () System configuration and protection. Bus and software watchdog - * monitors are provided in addition to periodic interrupt generators. - * - * () Clock signal generation for other intermodule bus (IMB) members - * and external devices. - * - * () The generation of chip-select signals that simplify external - * circuitry interface. - * - * () Data ports that are available for general purpose input and - * output. - * - * () A system test block that is intended only for factory tests. - * - * For more information, refer to Motorola's "Modular Microcontroller - * Family System Integration Module Reference Manual" (Motorola document - * SIMRM/AD). - * - * This file has been created by John S. Gwynne for support of - * Motorola's 68332 MCU in the efi332 project. - * - * Redistribution and use in source and binary forms are permitted - * provided that the following conditions are met: - * 1. Redistribution of source code and documentation must retain - * the above authorship, this list of conditions and the - * following disclaimer. - * 2. The name of the author may not be used to endorse or promote - * products derived from this software without specific prior - * written permission. - * - * This software is provided "AS IS" without warranty of any kind, - * either expressed or implied, including, but not limited to, the - * implied warranties of merchantability, title and fitness for a - * particular purpose. - * - *------------------------------------------------------------------ - * - * $Id$ - */ - -#ifndef _SIM_H_ -#define _SIM_H_ - - -/* - * XXX Why is a generic file like this including a bsp specific file? - -#include <efi332.h> - */ - - -/* SAM-- shift and mask */ -#undef SAM -#define SAM(a,b,c) ((a << b) & c) - -/* - * These macros make this file usable from assembly. - */ - -#ifdef ASM -#define SIM_VOLATILE_USHORT_POINTER -#define SIM_VOLATILE_UCHAR_POINTER -#else -#define SIM_VOLATILE_USHORT_POINTER (volatile unsigned short int * const) -#define SIM_VOLATILE_UCHAR_POINTER (volatile unsigned char * const) -#endif - -/* SIM_CRB (SIM Control Register Block) base address of the SIM - control registers */ -/* not included in ram_init.h */ -#if SIM_MM == 0 -#define SIM_CRB 0x7ffa00 -#else -#undef SIM_MM -#define SIM_MM 1 -#define SIM_CRB 0xfffa00 -#endif -/* end not included in ram_init.h */ - - - -#define SIMCR SIM_VOLATILE_USHORT_POINTER(0x00 + SIM_CRB) - /* Module Configuration Register */ -#define EXOFF 0x8000 /* External Clock Off */ -#define FRZSW 0x4000 /* Freeze Software Enable */ -#define FRZBM 0x2000 /* Freeze Bus Monitor Enable */ -#define SLVEN 0x0800 /* Factory Test Model Enabled (ro)*/ -#define SHEN 0x0300 /* Show Cycle Enable */ -#define SUPV 0x0080 /* Supervisor/Unrestricted Data Space */ -#define MM 0x0040 /* Module Mapping */ -#define IARB 0x000f /* Interrupt Arbitration Field */ - - - -#define SIMTR SIM_VOLATILE_USHORT_POINTER(0x02 + SIM_CRB) - /* SIM Test Register */ -/* Used only for factor testing */ - - - -#define SYNCR SIM_VOLATILE_USHORT_POINTER(0x04 + SIM_CRB) - /* Clock Synthesizer Control Register */ -#define W 0x8000 /* Frequency Control (VCO) */ -#define X 0x4000 /* Frequency Control Bit (Prescale) */ -#define Y 0x3f00 /* Frequency Control Counter */ -#define EDIV 0x0080 /* ECLK Divide Rate */ -#define SLIMP 0x0010 /* Limp Mode Status */ -#define SLOCK 0x0008 /* Synthesizer Lock */ -#define RSTEN 0x0004 /* Reset Enable */ -#define STSIM 0x0002 /* Stop Mode SIM Clock */ -#define STEXT 0x0001 /* Stop Mode External Clock */ - - - -#define RSR SIM_VOLATILE_UCHAR_POINTER(0x07 + SIM_CRB) - /* Reset Status Register */ -#define EXT 0x0080 /* External Reset */ -#define POW 0x0040 /* Power-On Reset */ -#define SW 0x0020 /* Software Watchdog Reset */ -#define DBF 0x0010 /* Double Bus Fault Reset */ -#define LOC 0x0004 /* Loss of Clock Reset */ -#define SYS 0x0002 /* System Reset */ -#define TST 0x0001 /* Test Submodule Reset */ - - - -#define SIMTRE SIM_VOLATILE_USHORT_POINTER(0x08 + SIM_CRB) - /* System Integration Test Register */ -/* Used only for factor testing */ - - - -#define PORTE0 SIM_VOLATILE_UCHAR_POINTER(0x11 + SIM_CRB) -#define PORTE1 SIM_VOLATILE_UCHAR_POINTER(0x13 + SIM_CRB) - /* Port E Data Register */ -#define DDRE SIM_VOLATILE_UCHAR_POINTER(0x15 + SIM_CRB) - /* Port E Data Direction Register */ -#define PEPAR SIM_VOLATILE_UCHAR_POINTER(0x17 + SIM_CRB) - /* Port E Pin Assignment Register */ -/* Any bit cleared (zero) defines the corresponding pin to be an I/O - pin. Any bit set defines the corresponding pin to be a bus control - signal. */ - - - -#define PORTF0 SIM_VOLATILE_UCHAR_POINTER(0x19 + SIM_CRB) -#define PORTF1 SIM_VOLATILE_UCHAR_POINTER(0x1b + SIM_CRB) - /* Port F Data Register */ -#define DDRF SIM_VOLATILE_UCHAR_POINTER(0x1d + SIM_CRB) - /* Port E Data Direction Register */ -#define PFPAR SIM_VOLATILE_UCHAR_POINTER(0x1f + SIM_CRB) -/* Any bit cleared (zero) defines the corresponding pin to be an I/O - pin. Any bit set defines the corresponding pin to be a bus control - signal. */ - - - -#define SYPCR SIM_VOLATILE_UCHAR_POINTER(0x21 + SIM_CRB) -/* !!! can write to only once after reset !!! */ - /* System Protection Control Register */ -#define SWE 0x80 /* Software Watch Enable */ -#define SWP 0x40 /* Software Watchdog Prescale */ -#define SWT 0x30 /* Software Watchdog Timing */ -#define HME 0x08 /* Halt Monitor Enable */ -#define BME 0x04 /* Bus Monitor External Enable */ -#define BMT 0x03 /* Bus Monitor Timing */ - - - -#define PICR SIM_VOLATILE_USHORT_POINTER(0x22 + SIM_CRB) - /* Periodic Interrupt Control Reg. */ -#define PIRQL 0x0700 /* Periodic Interrupt Request Level */ -#define PIV 0x00ff /* Periodic Interrupt Level */ - - - -#define PITR SIM_VOLATILE_USHORT_POINTER(0x24 + SIM_CRB) - /* Periodic Interrupt Timer Register */ -#define PTP 0x0100 /* Periodic Timer Prescaler Control */ -#define PITM 0x00ff /* Periodic Interrupt Timing Modulus */ - - - -#define SWSR SIM_VOLATILE_UCHAR_POINTER(0x27 + SIM_CRB) - /* Software Service Register */ -/* write 0x55 then 0xaa to service the software watchdog */ - - - -#define TSTMSRA SIM_VOLATILE_USHORT_POINTER(0x30 + SIM_CRB) - /* Test Module Master Shift A */ -#define TSTMSRB SIM_VOLATILE_USHORT_POINTER(0x32 + SIM_CRB) - /* Test Module Master Shift A */ -#define TSTSC SIM_VOLATILE_USHORT_POINTER(0x34 + SIM_CRB) - /* Test Module Shift Count */ -#define TSTRC SIM_VOLATILE_USHORT_POINTER(0x36 + SIM_CRB) - /* Test Module Repetition Counter */ -#define CREG SIM_VOLATILE_USHORT_POINTER(0x38 + SIM_CRB) - /* Test Module Control */ -#define DREG SIM_VOLATILE_USHORT_POINTER(0x3a + SIM_CRB) - /* Test Module Distributed */ -/* Used only for factor testing */ - - - -#define PORTC SIM_VOLATILE_UCHAR_POINTER(0x41 + SIM_CRB) - /* Port C Data */ - - - -#define CSPAR0 SIM_VOLATILE_USHORT_POINTER(0x44 + SIM_CRB) - /* Chip Select Pin Assignment - Resgister 0 */ -/* CSPAR0 contains seven two-bit fields that determine the functions - of corresponding chip-select pins. CSPAR0[15:14] are not - used. These bits always read zero; write have no effect. CSPAR0 bit - 1 always reads one; writes to CSPAR0 bit 1 have no effect. */ -#define CSPAR1 SIM_VOLATILE_USHORT_POINTER(0x46 + SIM_CRB) - /* Chip Select Pin Assignment - Register 1 */ -/* CSPAR1 contains five two-bit fields that determine the finctions of - corresponding chip-select pins. CSPAR1[15:10] are not used. These - bits always read zero; writes have no effect. */ -/* - * - * Bit Field | Description - * ------------+--------------- - * 00 | Discrete Output - * 01 | Alternate Function - * 10 | Chip Select (8-bit port) - * 11 | Chip Select (16-bit port) - */ -#define DisOut 0x0 -#define AltFun 0x1 -#define CS8bit 0x2 -#define CS16bit 0x3 -/* - * - * CSPARx Field |Chip Select Signal | Alternate Signal | Discrete Output - *-----------------+--------------------+--------------------+---------------*/ -#define CS_5 12 /* !CS5 | FC2 | PC2 */ -#define CS_4 10 /* !CS4 | FC1 | PC1 */ -#define CS_3 8 /* !CS3 | FC0 | PC0 */ -#define CS_2 6 /* !CS2 | !BGACK | */ -#define CS_1 4 /* !CS1 | !BG | */ -#define CS_0 2 /* !CS0 | !BR | */ -#define CSBOOT 0 /* !CSBOOT | | */ -/* | | | */ -#define CS_10 8 /* !CS10 | ADDR23 | ECLK */ -#define CS_9 6 /* !CS9 | ADDR22 | PC6 */ -#define CS_8 4 /* !CS8 | ADDR21 | PC5 */ -#define CS_7 2 /* !CS7 | ADDR20 | PC4 */ -#define CS_6 0 /* !CS6 | ADDR19 | PC3 */ - -#define BS_2K 0x0 -#define BS_8K 0x1 -#define BS_16K 0x2 -#define BS_64K 0x3 -#define BS_128K 0x4 -#define BS_256K 0x5 -#define BS_512K 0x6 -#define BS_1M 0x7 - -#define CSBARBT SIM_VOLATILE_USHORT_POINTER(0x48 + SIM_CRB) -#define CSBAR0 SIM_VOLATILE_USHORT_POINTER(0x4c + SIM_CRB) -#define CSBAR1 SIM_VOLATILE_USHORT_POINTER(0x50 + SIM_CRB) -#define CSBAR2 SIM_VOLATILE_USHORT_POINTER(0x54 + SIM_CRB) -#define CSBAR3 SIM_VOLATILE_USHORT_POINTER(0x58 + SIM_CRB) -#define CSBAR4 SIM_VOLATILE_USHORT_POINTER(0x5c + SIM_CRB) -#define CSBAR5 SIM_VOLATILE_USHORT_POINTER(0x60 + SIM_CRB) -#define CSBAR6 SIM_VOLATILE_USHORT_POINTER(0x64 + SIM_CRB) -#define CSBAR7 SIM_VOLATILE_USHORT_POINTER(0x68 + SIM_CRB) -#define CSBAR8 SIM_VOLATILE_USHORT_POINTER(0x6c + SIM_CRB) -#define CSBAR9 SIM_VOLATILE_USHORT_POINTER(0x70 + SIM_CRB) -#define CSBAR10 SIM_VOLATILE_USHORT_POINTER(0x74 + SIM_CRB) - -#define MODE 0x8000 -#define Disable 0 -#define LowerByte 0x2000 -#define UpperByte 0x4000 -#define BothBytes 0x6000 -#define ReadOnly 0x0800 -#define WriteOnly 0x1000 -#define ReadWrite 0x1800 -#define SyncAS 0x0 -#define SyncDS 0x0400 - -#define WaitStates_0 (0x0 << 6) -#define WaitStates_1 (0x1 << 6) -#define WaitStates_2 (0x2 << 6) -#define WaitStates_3 (0x3 << 6) -#define WaitStates_4 (0x4 << 6) -#define WaitStates_5 (0x5 << 6) -#define WaitStates_6 (0x6 << 6) -#define WaitStates_7 (0x7 << 6) -#define WaitStates_8 (0x8 << 6) -#define WaitStates_9 (0x9 << 6) -#define WaitStates_10 (0xa << 6) -#define WaitStates_11 (0xb << 6) -#define WaitStates_12 (0xc << 6) -#define WaitStates_13 (0xd << 6) -#define FastTerm (0xe << 6) -#define External (0xf << 6) - -#define CPUSpace (0x0 << 4) -#define UserSpace (0x1 << 4) -#define SupSpace (0x2 << 4) -#define UserSupSpace (0x3 << 4) - -#define IPLevel_any 0x0 -#define IPLevel_1 0x2 -#define IPLevel_2 0x4 -#define IPLevel_3 0x6 -#define IPLevel_4 0x8 -#define IPLevel_5 0xa -#define IPLevel_6 0xc -#define IPLevel_7 0xe - -#define AVEC 1 - -#define CSORBT SIM_VOLATILE_USHORT_POINTER(0x4a + SIM_CRB) -#define CSOR0 SIM_VOLATILE_USHORT_POINTER(0x4e + SIM_CRB) -#define CSOR1 SIM_VOLATILE_USHORT_POINTER(0x52 + SIM_CRB) -#define CSOR2 SIM_VOLATILE_USHORT_POINTER(0x56 + SIM_CRB) -#define CSOR3 SIM_VOLATILE_USHORT_POINTER(0x5a + SIM_CRB) -#define CSOR4 SIM_VOLATILE_USHORT_POINTER(0x5e + SIM_CRB) -#define CSOR5 SIM_VOLATILE_USHORT_POINTER(0x62 + SIM_CRB) -#define CSOR6 SIM_VOLATILE_USHORT_POINTER(0x66 + SIM_CRB) -#define CSOR7 SIM_VOLATILE_USHORT_POINTER(0x6a + SIM_CRB) -#define CSOR8 SIM_VOLATILE_USHORT_POINTER(0x6e + SIM_CRB) -#define CSOR9 SIM_VOLATILE_USHORT_POINTER(0x72 + SIM_CRB) -#define CSOR10 SIM_VOLATILE_USHORT_POINTER(0x76 + SIM_CRB) - -#endif /* _SIM_h_ */ diff --git a/c/src/exec/score/cpu/mips/asm.h b/c/src/exec/score/cpu/mips/asm.h deleted file mode 100644 index fccd89069f..0000000000 --- a/c/src/exec/score/cpu/mips/asm.h +++ /dev/null @@ -1,102 +0,0 @@ -/* asm.h - * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. - * - * - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - * - * COPYRIGHT: - * - * This file is based on similar code found in newlib available - * from ftp.cygnus.com. The file which was used had no copyright - * notice. This file is freely distributable as long as the source - * of the file is noted. This file is: - * - * COPYRIGHT (c) 1994-1997. - * On-Line Applications Research Corporation (OAR). - * - * $Id$ - */ -/* @(#)asm.h 03/15/96 1.1 */ - -#ifndef __NO_CPU_ASM_h -#define __NO_CPU_ASM_h - -/* - * Indicate we are in an assembly file and get the basic CPU definitions. - */ - -#ifndef ASM -#define ASM -#endif -#include <rtems/score/targopts.h> -#include <rtems/score/no_cpu.h> - -/* - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. - */ - -#ifndef __USER_LABEL_PREFIX__ -#define __USER_LABEL_PREFIX__ _ -#endif - -#ifndef __REGISTER_PREFIX__ -#define __REGISTER_PREFIX__ -#endif - -/* ANSI concatenation macros. */ - -#define CONCAT1(a, b) CONCAT2(a, b) -#define CONCAT2(a, b) a ## b - -/* Use the right prefix for global labels. */ - -#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) - -/* Use the right prefix for registers. */ - -#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) - -/* - * define macros for all of the registers on this CPU - * - * EXAMPLE: #define d0 REG (d0) - */ - -/* - * Define macros to handle section beginning and ends. - */ - - -#define BEGIN_CODE_DCL .text -#define END_CODE_DCL -#define BEGIN_DATA_DCL .data -#define END_DATA_DCL -#define BEGIN_CODE .text -#define END_CODE -#define BEGIN_DATA -#define END_DATA -#define BEGIN_BSS -#define END_BSS -#define END - -/* - * Following must be tailor for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. - */ - -#define PUBLIC(sym) .globl SYM (sym) -#define EXTERN(sym) .globl SYM (sym) - -#endif -/* end of include file */ - - diff --git a/c/src/exec/score/cpu/mips/cpu.c b/c/src/exec/score/cpu/mips/cpu.c deleted file mode 100644 index 4617be460d..0000000000 --- a/c/src/exec/score/cpu/mips/cpu.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * Mips CPU Dependent Source - * - * Author: Craig Lebakken <craigl@transition.com> - * - * COPYRIGHT (c) 1996 by Transition Networks Inc. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of Transition Networks not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * Transition Networks makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/score/cpu/no_cpu/cpu.c: - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -/* - * Rather than deleting this, it is commented out to (hopefully) help - * the submitter send updates. - * - * static char _sccsid[] = "@(#)cpu.c 08/20/96 1.5\n"; - */ - -#include <rtems/system.h> -#include <rtems/score/isr.h> -#include <rtems/score/wkspace.h> - - -ISR_Handler_entry _ISR_Vector_table[ ISR_NUMBER_OF_VECTORS ]; - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: - * cpu_table - CPU table to initialize - * thread_dispatch - address of disptaching routine - */ - - -void null_handler( void ) -{ -} - - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) /* ignored on this CPU */ -) -{ - unsigned int i = ISR_NUMBER_OF_VECTORS; - - while ( i-- ) - { - _ISR_Vector_table[i] = (ISR_Handler_entry)null_handler; - } - - /* - * The thread_dispatch argument is the address of the entry point - * for the routine called at the end of an ISR once it has been - * decided a context switch is necessary. On some compilation - * systems it is difficult to call a high-level language routine - * from assembly. This allows us to trick these systems. - * - * If you encounter this problem save the entry point in a CPU - * dependent variable. - */ - - _CPU_Thread_dispatch_pointer = thread_dispatch; - - /* - * If there is not an easy way to initialize the FP context - * during Context_Initialize, then it is usually easier to - * save an "uninitialized" FP context here and copy it to - * the task's during Context_Initialize. - */ - - /* FP context initialization support goes here */ - - _CPU_Table = *cpu_table; - -} - -/*PAGE - * - * _CPU_ISR_Get_level - */ - -#if 0 /* located in cpu_asm.S */ -unsigned32 _CPU_ISR_Get_level( void ) -{ - /* - * This routine returns the current interrupt level. - */ -} -#endif - -/*PAGE - * - * _CPU_ISR_install_raw_handler - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - /* - * This is where we install the interrupt handler into the "raw" interrupt - * table used by the CPU to dispatch interrupt handlers. - */ - -#if 0 /* not necessary */ -/* use IDT/Sim to set interrupt vector. Needed to co-exist with debugger. */ - add_ext_int_func( vector, new_handler ); -#endif -} - -/*PAGE - * - * _CPU_ISR_install_vector - * - * This kernel routine installs the RTEMS handler for the - * specified vector. - * - * Input parameters: - * vector - interrupt vector number - * old_handler - former ISR for this vector number - * new_handler - replacement ISR for this vector number - * - * Output parameters: NONE - * - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - *old_handler = _ISR_Vector_table[ vector ]; - - /* - * If the interrupt vector table is a table of pointer to isr entry - * points, then we need to install the appropriate RTEMS interrupt - * handler for this vector number. - */ - - _CPU_ISR_install_raw_handler( vector, _ISR_Handler, old_handler ); - - /* - * We put the actual user ISR address in '_ISR_vector_table'. This will - * be used by the _ISR_Handler so the user gets control. - */ - - _ISR_Vector_table[ vector ] = new_handler; -} - -/*PAGE - * - * _CPU_Install_interrupt_stack - */ - -void _CPU_Install_interrupt_stack( void ) -{ -/* we don't support this yet */ -} - -/*PAGE - * - * _CPU_Internal_threads_Idle_thread_body - * - * NOTES: - * - * 1. This is the same as the regular CPU independent algorithm. - * - * 2. If you implement this using a "halt", "idle", or "shutdown" - * instruction, then don't forget to put it in an infinite loop. - * - * 3. Be warned. Some processors with onboard DMA have been known - * to stop the DMA if the CPU were put in IDLE mode. This might - * also be a problem with other on-chip peripherals. So use this - * hook with caution. - */ - -#if 0 /* located in cpu_asm.S */ -void _CPU_Thread_Idle_body( void ) -{ - - for( ; ; ) - /* insert your "halt" instruction here */ ; -} -#endif - -extern void mips_break( int error ); - -#include <stdio.h> - -void mips_fatal_error( int error ) -{ - printf("fatal error 0x%x %d\n",error,error); - mips_break( error ); -} diff --git a/c/src/exec/score/cpu/mips/cpu_asm.S b/c/src/exec/score/cpu/mips/cpu_asm.S deleted file mode 100644 index 7dcb8fbda7..0000000000 --- a/c/src/exec/score/cpu/mips/cpu_asm.S +++ /dev/null @@ -1,972 +0,0 @@ -/* cpu_asm.S - * - * This file contains the basic algorithms for all assembly code used - * in an specific CPU port of RTEMS. These algorithms must be implemented - * in assembly language - * - * Author: Craig Lebakken <craigl@transition.com> - * - * COPYRIGHT (c) 1996 by Transition Networks Inc. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of Transition Networks not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * Transition Networks makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/score/cpu/no_cpu/cpu_asm.s: - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ -/* @(#)cpu_asm.S 08/20/96 1.15 */ - -#include "cpu_asm.h" - -#include "iregdef.h" -#include "idtcpu.h" - -#define FRAME(name,frm_reg,offset,ret_reg) \ - .globl name; \ - .ent name; \ -name:; \ - .frame frm_reg,offset,ret_reg -#define ENDFRAME(name) \ - .end name - - -#define EXCP_STACK_SIZE (NREGS*R_SZ) - -#if __ghs__ -#define sd sw -#define ld lw -#define dmtc0 mtc0 -#define dsll sll -#define dmfc0 mfc0 -#endif - -#if 1 /* 32 bit unsigned32 types */ -#define sint sw -#define lint lw -#define stackadd addiu -#define intadd addu -#define SZ_INT 4 -#define SZ_INT_POW2 2 -#else /* 64 bit unsigned32 types */ -#define sint dw -#define lint dw -#define stackadd daddiu -#define intadd daddu -#define SZ_INT 8 -#define SZ_INT_POW2 3 -#endif - -#ifdef __GNUC__ -#define EXTERN(x,size) .extern x,size -#else -#define EXTERN(x,size) -#endif - -/* NOTE: these constants must match the Context_Control structure in cpu.h */ -#define S0_OFFSET 0 -#define S1_OFFSET 1 -#define S2_OFFSET 2 -#define S3_OFFSET 3 -#define S4_OFFSET 4 -#define S5_OFFSET 5 -#define S6_OFFSET 6 -#define S7_OFFSET 7 -#define SP_OFFSET 8 -#define FP_OFFSET 9 -#define RA_OFFSET 10 -#define C0_SR_OFFSET 11 -#define C0_EPC_OFFSET 12 - -/* NOTE: these constants must match the Context_Control_fp structure in cpu.h */ -#define FP0_OFFSET 0 -#define FP1_OFFSET 1 -#define FP2_OFFSET 2 -#define FP3_OFFSET 3 -#define FP4_OFFSET 4 -#define FP5_OFFSET 5 -#define FP6_OFFSET 6 -#define FP7_OFFSET 7 -#define FP8_OFFSET 8 -#define FP9_OFFSET 9 -#define FP10_OFFSET 10 -#define FP11_OFFSET 11 -#define FP12_OFFSET 12 -#define FP13_OFFSET 13 -#define FP14_OFFSET 14 -#define FP15_OFFSET 15 -#define FP16_OFFSET 16 -#define FP17_OFFSET 17 -#define FP18_OFFSET 18 -#define FP19_OFFSET 19 -#define FP20_OFFSET 20 -#define FP21_OFFSET 21 -#define FP22_OFFSET 22 -#define FP23_OFFSET 23 -#define FP24_OFFSET 24 -#define FP25_OFFSET 25 -#define FP26_OFFSET 26 -#define FP27_OFFSET 27 -#define FP28_OFFSET 28 -#define FP29_OFFSET 29 -#define FP30_OFFSET 30 -#define FP31_OFFSET 31 - - -/*PAGE - * - * _CPU_ISR_Get_level - */ - -#if 0 -unsigned32 _CPU_ISR_Get_level( void ) -{ - /* - * This routine returns the current interrupt level. - */ -} -#endif -/* return the current exception level for the 4650 */ -FRAME(_CPU_ISR_Get_level,sp,0,ra) - mfc0 v0,C0_SR - nop - andi v0,SR_EXL - srl v0,1 - j ra -ENDFRAME(_CPU_ISR_Get_level) - -FRAME(_CPU_ISR_Set_level,sp,0,ra) - nop - mfc0 a0,C0_SR - nop - andi a0,SR_EXL - beqz a0,_CPU_ISR_Set_1 /* normalize a0 */ - nop - li a0,1 -_CPU_ISR_Set_1: - beq v0,a0,_CPU_ISR_Set_exit /* if (current_level != new_level ) */ - nop - bnez a0,_CPU_ISR_Set_2 - nop - nop - mfc0 t0,C0_SR - nop - li t1,~SR_EXL - and t0,t1 - nop - mtc0 t0,C0_SR /* disable exception level */ - nop - j ra - nop -_CPU_ISR_Set_2: - nop - mfc0 t0,C0_SR - nop - li t1,~SR_IE - and t0,t1 - nop - mtc0 t0,C0_SR /* first disable ie bit (recommended) */ - nop - ori t0,SR_EXL|SR_IE /* enable exception level */ - nop - mtc0 t0,C0_SR - nop -_CPU_ISR_Set_exit: - j ra - nop -ENDFRAME(_CPU_ISR_Set_level) - -/* - * _CPU_Context_save_fp_context - * - * This routine is responsible for saving the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * Sometimes a macro implementation of this is in cpu.h which dereferences - * the ** and a similarly named routine in this file is passed something - * like a (Context_Control_fp *). The general rule on making this decision - * is to avoid writing assembly language. - */ - -/* void _CPU_Context_save_fp( - * void **fp_context_ptr - * ) - * { - * } - */ - -FRAME(_CPU_Context_save_fp,sp,0,ra) - .set noat - ld a1,(a0) - swc1 $f0,FP0_OFFSET*4(a1) - swc1 $f1,FP1_OFFSET*4(a1) - swc1 $f2,FP2_OFFSET*4(a1) - swc1 $f3,FP3_OFFSET*4(a1) - swc1 $f4,FP4_OFFSET*4(a1) - swc1 $f5,FP5_OFFSET*4(a1) - swc1 $f6,FP6_OFFSET*4(a1) - swc1 $f7,FP7_OFFSET*4(a1) - swc1 $f8,FP8_OFFSET*4(a1) - swc1 $f9,FP9_OFFSET*4(a1) - swc1 $f10,FP10_OFFSET*4(a1) - swc1 $f11,FP11_OFFSET*4(a1) - swc1 $f12,FP12_OFFSET*4(a1) - swc1 $f13,FP13_OFFSET*4(a1) - swc1 $f14,FP14_OFFSET*4(a1) - swc1 $f15,FP15_OFFSET*4(a1) - swc1 $f16,FP16_OFFSET*4(a1) - swc1 $f17,FP17_OFFSET*4(a1) - swc1 $f18,FP18_OFFSET*4(a1) - swc1 $f19,FP19_OFFSET*4(a1) - swc1 $f20,FP20_OFFSET*4(a1) - swc1 $f21,FP21_OFFSET*4(a1) - swc1 $f22,FP22_OFFSET*4(a1) - swc1 $f23,FP23_OFFSET*4(a1) - swc1 $f24,FP24_OFFSET*4(a1) - swc1 $f25,FP25_OFFSET*4(a1) - swc1 $f26,FP26_OFFSET*4(a1) - swc1 $f27,FP27_OFFSET*4(a1) - swc1 $f28,FP28_OFFSET*4(a1) - swc1 $f29,FP29_OFFSET*4(a1) - swc1 $f30,FP30_OFFSET*4(a1) - swc1 $f31,FP31_OFFSET*4(a1) - j ra - nop - .set at -ENDFRAME(_CPU_Context_save_fp) - -/* - * _CPU_Context_restore_fp_context - * - * This routine is responsible for restoring the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * Sometimes a macro implementation of this is in cpu.h which dereferences - * the ** and a similarly named routine in this file is passed something - * like a (Context_Control_fp *). The general rule on making this decision - * is to avoid writing assembly language. - */ - -/* void _CPU_Context_restore_fp( - * void **fp_context_ptr - * ) - * { - * } - */ - -FRAME(_CPU_Context_restore_fp,sp,0,ra) - .set noat - ld a1,(a0) - lwc1 $f0,FP0_OFFSET*4(a1) - lwc1 $f1,FP1_OFFSET*4(a1) - lwc1 $f2,FP2_OFFSET*4(a1) - lwc1 $f3,FP3_OFFSET*4(a1) - lwc1 $f4,FP4_OFFSET*4(a1) - lwc1 $f5,FP5_OFFSET*4(a1) - lwc1 $f6,FP6_OFFSET*4(a1) - lwc1 $f7,FP7_OFFSET*4(a1) - lwc1 $f8,FP8_OFFSET*4(a1) - lwc1 $f9,FP9_OFFSET*4(a1) - lwc1 $f10,FP10_OFFSET*4(a1) - lwc1 $f11,FP11_OFFSET*4(a1) - lwc1 $f12,FP12_OFFSET*4(a1) - lwc1 $f13,FP13_OFFSET*4(a1) - lwc1 $f14,FP14_OFFSET*4(a1) - lwc1 $f15,FP15_OFFSET*4(a1) - lwc1 $f16,FP16_OFFSET*4(a1) - lwc1 $f17,FP17_OFFSET*4(a1) - lwc1 $f18,FP18_OFFSET*4(a1) - lwc1 $f19,FP19_OFFSET*4(a1) - lwc1 $f20,FP20_OFFSET*4(a1) - lwc1 $f21,FP21_OFFSET*4(a1) - lwc1 $f22,FP22_OFFSET*4(a1) - lwc1 $f23,FP23_OFFSET*4(a1) - lwc1 $f24,FP24_OFFSET*4(a1) - lwc1 $f25,FP25_OFFSET*4(a1) - lwc1 $f26,FP26_OFFSET*4(a1) - lwc1 $f27,FP27_OFFSET*4(a1) - lwc1 $f28,FP28_OFFSET*4(a1) - lwc1 $f29,FP29_OFFSET*4(a1) - lwc1 $f30,FP30_OFFSET*4(a1) - lwc1 $f31,FP31_OFFSET*4(a1) - j ra - nop - .set at -ENDFRAME(_CPU_Context_restore_fp) - -/* _CPU_Context_switch - * - * This routine performs a normal non-FP context switch. - */ - -/* void _CPU_Context_switch( - * Context_Control *run, - * Context_Control *heir - * ) - * { - * } - */ - -FRAME(_CPU_Context_switch,sp,0,ra) - - mfc0 t0,C0_SR - li t1,~SR_IE - sd t0,C0_SR_OFFSET*8(a0) /* save status register */ - and t0,t1 - mtc0 t0,C0_SR /* first disable ie bit (recommended) */ - ori t0,SR_EXL|SR_IE /* enable exception level to disable interrupts */ - mtc0 t0,C0_SR - - sd ra,RA_OFFSET*8(a0) /* save current context */ - sd sp,SP_OFFSET*8(a0) - sd fp,FP_OFFSET*8(a0) - sd s0,S0_OFFSET*8(a0) - sd s1,S1_OFFSET*8(a0) - sd s2,S2_OFFSET*8(a0) - sd s3,S3_OFFSET*8(a0) - sd s4,S4_OFFSET*8(a0) - sd s5,S5_OFFSET*8(a0) - sd s6,S6_OFFSET*8(a0) - sd s7,S7_OFFSET*8(a0) - dmfc0 t0,C0_EPC - sd t0,C0_EPC_OFFSET*8(a0) - -_CPU_Context_switch_restore: - ld s0,S0_OFFSET*8(a1) /* restore context */ - ld s1,S1_OFFSET*8(a1) - ld s2,S2_OFFSET*8(a1) - ld s3,S3_OFFSET*8(a1) - ld s4,S4_OFFSET*8(a1) - ld s5,S5_OFFSET*8(a1) - ld s6,S6_OFFSET*8(a1) - ld s7,S7_OFFSET*8(a1) - ld fp,FP_OFFSET*8(a1) - ld sp,SP_OFFSET*8(a1) - ld ra,RA_OFFSET*8(a1) - ld t0,C0_EPC_OFFSET*8(a1) - dmtc0 t0,C0_EPC - ld t0,C0_SR_OFFSET*8(a1) - andi t0,SR_EXL - bnez t0,_CPU_Context_1 /* set exception level from restore context */ - li t0,~SR_EXL - mfc0 t1,C0_SR - nop - and t1,t0 - mtc0 t1,C0_SR -_CPU_Context_1: - j ra - nop -ENDFRAME(_CPU_Context_switch) - -/* - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner. It may simply be a label in _CPU_Context_switch. - * - * NOTE: May be unnecessary to reload some registers. - */ - -#if 0 -void _CPU_Context_restore( - Context_Control *new_context -) -{ -} -#endif - -FRAME(_CPU_Context_restore,sp,0,ra) - dadd a1,a0,zero - j _CPU_Context_switch_restore - nop -ENDFRAME(_CPU_Context_restore) - -EXTERN(_ISR_Nest_level, SZ_INT) -EXTERN(_Thread_Dispatch_disable_level,SZ_INT) -EXTERN(_Context_Switch_necessary,SZ_INT) -EXTERN(_ISR_Signals_to_thread_executing,SZ_INT) -.extern _Thread_Dispatch -.extern _ISR_Vector_table - -/* void __ISR_Handler() - * - * This routine provides the RTEMS interrupt management. - * - */ - -#if 0 -void _ISR_Handler() -{ - /* - * This discussion ignores a lot of the ugly details in a real - * implementation such as saving enough registers/state to be - * able to do something real. Keep in mind that the goal is - * to invoke a user's ISR handler which is written in C and - * uses a certain set of registers. - * - * Also note that the exact order is to a large extent flexible. - * Hardware will dictate a sequence for a certain subset of - * _ISR_Handler while requirements for setting - */ - - /* - * At entry to "common" _ISR_Handler, the vector number must be - * available. On some CPUs the hardware puts either the vector - * number or the offset into the vector table for this ISR in a - * known place. If the hardware does not give us this information, - * then the assembly portion of RTEMS for this port will contain - * a set of distinct interrupt entry points which somehow place - * the vector number in a known place (which is safe if another - * interrupt nests this one) and branches to _ISR_Handler. - * - */ -#endif -FRAME(_ISR_Handler,sp,0,ra) -.set noreorder -#if USE_IDTKIT -/* IDT/Kit incorrectly adds 4 to EPC before returning. This compensates */ - lreg k0, R_EPC*R_SZ(sp) - daddiu k0,k0,-4 - sreg k0, R_EPC*R_SZ(sp) - lreg k0, R_CAUSE*R_SZ(sp) - li k1, ~CAUSE_BD - and k0, k1 - sreg k0, R_CAUSE*R_SZ(sp) -#endif - -/* save registers not already saved by IDT/sim */ - stackadd sp,sp,-EXCP_STACK_SIZE /* store ra on the stack */ - - sreg ra, R_RA*R_SZ(sp) - sreg v0, R_V0*R_SZ(sp) - sreg v1, R_V1*R_SZ(sp) - sreg a0, R_A0*R_SZ(sp) - sreg a1, R_A1*R_SZ(sp) - sreg a2, R_A2*R_SZ(sp) - sreg a3, R_A3*R_SZ(sp) - sreg t0, R_T0*R_SZ(sp) - sreg t1, R_T1*R_SZ(sp) - sreg t2, R_T2*R_SZ(sp) - sreg t3, R_T3*R_SZ(sp) - sreg t4, R_T4*R_SZ(sp) - sreg t5, R_T5*R_SZ(sp) - sreg t6, R_T6*R_SZ(sp) - sreg t7, R_T7*R_SZ(sp) - mflo k0 - sreg t8, R_T8*R_SZ(sp) - sreg k0, R_MDLO*R_SZ(sp) - sreg t9, R_T9*R_SZ(sp) - mfhi k0 - sreg gp, R_GP*R_SZ(sp) - sreg fp, R_FP*R_SZ(sp) - sreg k0, R_MDHI*R_SZ(sp) - .set noat - sreg AT, R_AT*R_SZ(sp) - .set at - - stackadd sp,sp,-40 /* store ra on the stack */ - sd ra,32(sp) - -/* determine if an interrupt generated this exception */ - mfc0 k0,C0_CAUSE - and k1,k0,CAUSE_EXCMASK - bnez k1,_ISR_Handler_prom_exit /* not an external interrupt, pass exception to Monitor */ - mfc0 k1,C0_SR - and k0,k1 - and k0,CAUSE_IPMASK - beq k0,zero,_ISR_Handler_quick_exit /* external interrupt not enabled, ignore */ - nop - - /* - * save some or all context on stack - * may need to save some special interrupt information for exit - * - * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) - * if ( _ISR_Nest_level == 0 ) - * switch to software interrupt stack - * #endif - */ -#if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) - lint t0,_ISR_Nest_level - beq t0, zero, _ISR_Handler_1 - nop - /* switch stacks */ -_ISR_Handler_1: -#else - lint t0,_ISR_Nest_level -#endif - /* - * _ISR_Nest_level++; - */ - addi t0,t0,1 - sint t0,_ISR_Nest_level - /* - * _Thread_Dispatch_disable_level++; - */ - lint t1,_Thread_Dispatch_disable_level - addi t1,t1,1 - sint t1,_Thread_Dispatch_disable_level -#if 0 - nop - j _ISR_Handler_4 - nop - /* - * while ( interrupts_pending(cause_reg) ) { - * vector = BITFIELD_TO_INDEX(cause_reg); - * (*_ISR_Vector_table[ vector ])( vector ); - * } - */ -_ISR_Handler_2: -/* software interrupt priorities can be applied here */ - li t1,-1 -/* convert bit field into interrupt index */ -_ISR_Handler_3: - andi t2,t0,1 - addi t1,1 - beql t2,zero,_ISR_Handler_3 - dsrl t0,1 - li t1,7 - dsll t1,3 /* convert index to byte offset (*8) */ - la t3,_ISR_Vector_table - intadd t1,t3 - lint t1,(t1) - jalr t1 - nop - j _ISR_Handler_5 - nop -_ISR_Handler_4: - mfc0 t0,C0_CAUSE - andi t0,CAUSE_IPMASK - bne t0,zero,_ISR_Handler_2 - dsrl t0,t0,8 -_ISR_Handler_5: -#else - nop - li t1,7 - dsll t1,t1,SZ_INT_POW2 - la t3,_ISR_Vector_table - intadd t1,t3 - lint t1,(t1) - jalr t1 - nop -#endif - /* - * --_ISR_Nest_level; - */ - lint t2,_ISR_Nest_level - addi t2,t2,-1 - sint t2,_ISR_Nest_level - /* - * --_Thread_Dispatch_disable_level; - */ - lint t1,_Thread_Dispatch_disable_level - addi t1,t1,-1 - sint t1,_Thread_Dispatch_disable_level - /* - * if ( _Thread_Dispatch_disable_level || _ISR_Nest_level ) - * goto the label "exit interrupt (simple case)" - */ - or t0,t2,t1 - bne t0,zero,_ISR_Handler_exit - nop - /* - * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) - * restore stack - * #endif - * - * if ( !_Context_Switch_necessary && !_ISR_Signals_to_thread_executing ) - * goto the label "exit interrupt (simple case)" - */ - lint t0,_Context_Switch_necessary - lint t1,_ISR_Signals_to_thread_executing - or t0,t0,t1 - beq t0,zero,_ISR_Handler_exit - nop - - /* - * call _Thread_Dispatch() or prepare to return to _ISR_Dispatch - */ - jal _Thread_Dispatch - nop - /* - * prepare to get out of interrupt - * return from interrupt (maybe to _ISR_Dispatch) - * - * LABEL "exit interrupt (simple case): - * prepare to get out of interrupt - * return from interrupt - */ -_ISR_Handler_exit: - ld ra,32(sp) - stackadd sp,sp,40 - -/* restore interrupt context from stack */ - lreg k0, R_MDLO*R_SZ(sp) - mtlo k0 - lreg k0, R_MDHI*R_SZ(sp) - lreg a2, R_A2*R_SZ(sp) - mthi k0 - lreg a3, R_A3*R_SZ(sp) - lreg t0, R_T0*R_SZ(sp) - lreg t1, R_T1*R_SZ(sp) - lreg t2, R_T2*R_SZ(sp) - lreg t3, R_T3*R_SZ(sp) - lreg t4, R_T4*R_SZ(sp) - lreg t5, R_T5*R_SZ(sp) - lreg t6, R_T6*R_SZ(sp) - lreg t7, R_T7*R_SZ(sp) - lreg t8, R_T8*R_SZ(sp) - lreg t9, R_T9*R_SZ(sp) - lreg gp, R_GP*R_SZ(sp) - lreg fp, R_FP*R_SZ(sp) - lreg ra, R_RA*R_SZ(sp) - lreg a0, R_A0*R_SZ(sp) - lreg a1, R_A1*R_SZ(sp) - lreg v1, R_V1*R_SZ(sp) - lreg v0, R_V0*R_SZ(sp) - .set noat - lreg AT, R_AT*R_SZ(sp) - .set at - - stackadd sp,sp,EXCP_STACK_SIZE /* store ra on the stack */ - -#if USE_IDTKIT -/* we handled exception, so return non-zero value */ - li v0,1 -#endif - -_ISR_Handler_quick_exit: -#ifdef USE_IDTKIT - j ra -#else - eret -#endif - nop - -_ISR_Handler_prom_exit: -#ifdef CPU_R3000 - la k0, (R_VEC+((48)*8)) -#endif - -#ifdef CPU_R4000 - la k0, (R_VEC+((112)*8)) /* R4000 Sim's location is different */ -#endif - j k0 - nop - - .set reorder - -ENDFRAME(_ISR_Handler) - - -FRAME(mips_enable_interrupts,sp,0,ra) - mfc0 t0,C0_SR /* get status reg */ - nop - or t0,t0,a0 - mtc0 t0,C0_SR /* save updated status reg */ - j ra - nop -ENDFRAME(mips_enable_interrupts) - -FRAME(mips_disable_interrupts,sp,0,ra) - mfc0 v0,C0_SR /* get status reg */ - li t1,SR_IMASK /* t1 = load interrupt mask word */ - not t0,t1 /* t0 = ~t1 */ - and t0,v0 /* clear imask bits */ - mtc0 t0,C0_SR /* save status reg */ - and v0,t1 /* mask return value (only return imask bits) */ - jr ra - nop -ENDFRAME(mips_disable_interrupts) - -FRAME(mips_enable_global_interrupts,sp,0,ra) - mfc0 t0,C0_SR /* get status reg */ - nop - ori t0,SR_IE - mtc0 t0,C0_SR /* save updated status reg */ - j ra - nop -ENDFRAME(mips_enable_global_interrupts) - -FRAME(mips_disable_global_interrupts,sp,0,ra) - li t1,SR_IE - mfc0 t0,C0_SR /* get status reg */ - not t1 - and t0,t1 - mtc0 t0,C0_SR /* save updated status reg */ - j ra - nop -ENDFRAME(mips_disable_global_interrupts) - -/* return the value of the status register in v0. Used for debugging */ -FRAME(mips_get_sr,sp,0,ra) - mfc0 v0,C0_SR - j ra - nop -ENDFRAME(mips_get_sr) - -FRAME(mips_break,sp,0,ra) -#if 1 - break 0x0 - j mips_break -#else - j ra -#endif - nop -ENDFRAME(mips_break) - -/*PAGE - * - * _CPU_Internal_threads_Idle_thread_body - * - * NOTES: - * - * 1. This is the same as the regular CPU independent algorithm. - * - * 2. If you implement this using a "halt", "idle", or "shutdown" - * instruction, then don't forget to put it in an infinite loop. - * - * 3. Be warned. Some processors with onboard DMA have been known - * to stop the DMA if the CPU were put in IDLE mode. This might - * also be a problem with other on-chip peripherals. So use this - * hook with caution. - */ - -FRAME(_CPU_Thread_Idle_body,sp,0,ra) - wait /* enter low power mode */ - j _CPU_Thread_Idle_body - nop -ENDFRAME(_CPU_Thread_Idle_body) - -#define VEC_CODE_LENGTH 10*4 - -/************************************************************************** -** -** init_exc_vecs() - moves the exception code into the addresses -** reserved for exception vectors -** -** UTLB Miss exception vector at address 0x80000000 -** -** General exception vector at address 0x80000080 -** -** RESET exception vector is at address 0xbfc00000 -** -***************************************************************************/ - -#define INITEXCFRM ((2*4)+4) /* ra + 2 arguments */ -FRAME(init_exc_vecs,sp,0,ra) -/* This code yanked from SIM */ -#if defined(CPU_R3000) - .set noreorder - la t1,exc_utlb_code - la t2,exc_norm_code - li t3,UT_VEC - li t4,E_VEC - li t5,VEC_CODE_LENGTH -1: - lw t6,0(t1) - lw t7,0(t2) - sw t6,0(t3) - sw t7,0(t4) - addiu t1,4 - addiu t3,4 - addiu t4,4 - subu t5,4 - bne t5,zero,1b - addiu t2,4 - move t5,ra # assumes clear_cache doesnt use t5 - li a0,UT_VEC - jal clear_cache - li a1,VEC_CODE_LENGTH - nop - li a0,E_VEC - jal clear_cache - li a1,VEC_CODE_LENGTH - move ra,t5 # restore ra - j ra - nop - .set reorder -#endif -#if defined(CPU_R4000) - .set reorder - move t5,ra # assumes clear_cache doesnt use t5 - - /* TLB exception vector */ - la t1,exc_tlb_code - li t2,T_VEC |K1BASE - li t3,VEC_CODE_LENGTH -1: - lw t6,0(t1) - addiu t1,4 - subu t3,4 - sw t6,0(t2) - addiu t2,4 - bne t3,zero,1b - - li a0,T_VEC - li a1,VEC_CODE_LENGTH - jal clear_cache - - la t1,exc_xtlb_code - li t2,X_VEC |K1BASE - li t3,VEC_CODE_LENGTH -1: - lw t6,0(t1) - addiu t1,4 - subu t3,4 - sw t6,0(t2) - addiu t2,4 - bne t3,zero,1b - - /* extended TLB exception vector */ - li a0,X_VEC - li a1,VEC_CODE_LENGTH - jal clear_cache - - /* cache error exception vector */ - la t1,exc_cache_code - li t2,C_VEC |K1BASE - li t3,VEC_CODE_LENGTH -1: - lw t6,0(t1) - addiu t1,4 - subu t3,4 - sw t6,0(t2) - addiu t2,4 - bne t3,zero,1b - - li a0,C_VEC - li a1,VEC_CODE_LENGTH - jal clear_cache - - /* normal exception vector */ - la t1,exc_norm_code - li t2,E_VEC |K1BASE - li t3,VEC_CODE_LENGTH -1: - lw t6,0(t1) - addiu t1,4 - subu t3,4 - sw t6,0(t2) - addiu t2,4 - bne t3,zero,1b - - li a0,E_VEC - li a1,VEC_CODE_LENGTH - jal clear_cache - - move ra,t5 # restore ra - j ra -#endif -ENDFRAME(init_exc_vecs) - - -#if defined(CPU_R4000) -FRAME(exc_tlb_code,sp,0,ra) -#ifdef CPU_R3000 - la k0, (R_VEC+((48)*8)) -#endif - -#ifdef CPU_R4000 - la k0, (R_VEC+((112)*8)) /* R4000 Sim's location is different */ -#endif - j k0 - nop - -ENDFRAME(exc_tlb_code) - - -FRAME(exc_xtlb_code,sp,0,ra) -#ifdef CPU_R3000 - la k0, (R_VEC+((48)*8)) -#endif - -#ifdef CPU_R4000 - la k0, (R_VEC+((112)*8)) /* R4000 Sim's location is different */ -#endif - j k0 - nop - -ENDFRAME(exc_xtlb_code) - - -FRAME(exc_cache_code,sp,0,ra) -#ifdef CPU_R3000 - la k0, (R_VEC+((48)*8)) -#endif - -#ifdef CPU_R4000 - la k0, (R_VEC+((112)*8)) /* R4000 Sim's location is different */ -#endif - j k0 - nop - -ENDFRAME(exc_cache_code) - - -FRAME(exc_norm_code,sp,0,ra) - la k0, _ISR_Handler /* generic external int hndlr */ - j k0 - nop - subu sp, EXCP_STACK_SIZE /* set up local stack frame */ -ENDFRAME(exc_norm_code) -#endif - -/************************************************************************** -** -** enable_int(mask) - enables interrupts - mask is positioned so it only -** needs to be or'ed into the status reg. This -** also does some other things !!!! caution should -** be used if invoking this while in the middle -** of a debugging session where the client may have -** nested interrupts. -** -****************************************************************************/ -FRAME(enable_int,sp,0,ra) - .set noreorder - mfc0 t0,C0_SR - or a0,1 - or t0,a0 - mtc0 t0,C0_SR - j ra - nop - .set reorder -ENDFRAME(enable_int) - - -/*************************************************************************** -** -** disable_int(mask) - disable the interrupt - mask is the complement -** of the bits to be cleared - i.e. to clear ext int -** 5 the mask would be - 0xffff7fff -** -****************************************************************************/ -FRAME(disable_int,sp,0,ra) - .set noreorder - mfc0 t0,C0_SR - nop - and t0,a0 - mtc0 t0,C0_SR - j ra - nop -ENDFRAME(disable_int) - - diff --git a/c/src/exec/score/cpu/mips/cpu_asm.h b/c/src/exec/score/cpu/mips/cpu_asm.h deleted file mode 100644 index 5d78f39d7c..0000000000 --- a/c/src/exec/score/cpu/mips/cpu_asm.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * cpu_asm.h - * - * Author: Craig Lebakken <craigl@transition.com> - * - * COPYRIGHT (c) 1996 by Transition Networks Inc. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of Transition Networks not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * Transition Networks makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/score/cpu/no_cpu/cpu_asm.h: - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - * - */ -/* @(#)cpu_asm.h 08/20/96 1.2 */ - -#ifndef __CPU_ASM_h -#define __CPU_ASM_h - -/* pull in the generated offsets */ - -/* #include <rtems/score/offsets.h> */ - -/* - * Hardware General Registers - */ - -/* put something here */ - -/* - * Hardware Floating Point Registers - */ - -#define R_FP0 0 -#define R_FP1 1 -#define R_FP2 2 -#define R_FP3 3 -#define R_FP4 4 -#define R_FP5 5 -#define R_FP6 6 -#define R_FP7 7 -#define R_FP8 8 -#define R_FP9 9 -#define R_FP10 10 -#define R_FP11 11 -#define R_FP12 12 -#define R_FP13 13 -#define R_FP14 14 -#define R_FP15 15 -#define R_FP16 16 -#define R_FP17 17 -#define R_FP18 18 -#define R_FP19 19 -#define R_FP20 20 -#define R_FP21 21 -#define R_FP22 22 -#define R_FP23 23 -#define R_FP24 24 -#define R_FP25 25 -#define R_FP26 26 -#define R_FP27 27 -#define R_FP28 28 -#define R_FP29 29 -#define R_FP30 30 -#define R_FP31 31 - -/* - * Hardware Control Registers - */ - -/* put something here */ - -/* - * Calling Convention - */ - -/* put something here */ - -/* - * Temporary registers - */ - -/* put something here */ - -/* - * Floating Point Registers - SW Conventions - */ - -/* put something here */ - -/* - * Temporary floating point registers - */ - -/* put something here */ - -#endif - -/* end of file */ diff --git a/c/src/exec/score/cpu/mips/idtcpu.h b/c/src/exec/score/cpu/mips/idtcpu.h deleted file mode 100644 index f921e85ef6..0000000000 --- a/c/src/exec/score/cpu/mips/idtcpu.h +++ /dev/null @@ -1,440 +0,0 @@ -/* - -Based upon IDT provided code with the following release: - -This source code has been made available to you by IDT on an AS-IS -basis. Anyone receiving this source is licensed under IDT copyrights -to use it in any way he or she deems fit, including copying it, -modifying it, compiling it, and redistributing it either with or -without modifications. No license under IDT patents or patent -applications is to be implied by the copyright license. - -Any user of this software should understand that IDT cannot provide -technical support for this software and will not be responsible for -any consequences resulting from the use of this software. - -Any person who transfers this source code or any derivative work must -include the IDT copyright notice, this paragraph, and the preceeding -two paragraphs in the transferred software. - -COPYRIGHT IDT CORPORATION 1996 -LICENSED MATERIAL - PROGRAM PROPERTY OF IDT - - $Id$ -*/ - -/* -** idtcpu.h -- cpu related defines -*/ - -#ifndef _IDTCPU_H__ -#define _IDTCPU_H__ - -/* - * 950313: Ketan added Register definition for XContext reg. - * added define for WAIT instruction. - * 950421: Ketan added Register definition for Config reg (R3081) - */ - -/* -** memory configuration and mapping -*/ -#define K0BASE 0x80000000 -#define K0SIZE 0x20000000 -#define K1BASE 0xa0000000 -#define K1SIZE 0x20000000 -#define K2BASE 0xc0000000 -#define K2SIZE 0x20000000 -#if defined(CPU_R4000) -#define KSBASE 0xe0000000 -#define KSSIZE 0x20000000 -#endif - -#define KUBASE 0 -#define KUSIZE 0x80000000 - -/* -** Exception Vectors -*/ -#if defined(CPU_R3000) -#define UT_VEC K0BASE /* utlbmiss vector */ -#define E_VEC (K0BASE+0x80) /* exception vevtor */ -#endif -#if defined(CPU_R4000) -#define T_VEC (K0BASE+0x000) /* tlbmiss vector */ -#define X_VEC (K0BASE+0x080) /* xtlbmiss vector */ -#define C_VEC (K0BASE+0x100) /* cache error vector */ -#define E_VEC (K0BASE+0x180) /* exception vector */ -#endif -#define R_VEC (K1BASE+0x1fc00000) /* reset vector */ - -/* -** Address conversion macros -*/ -#ifdef CLANGUAGE -#define CAST(as) (as) -#else -#define CAST(as) -#endif -#define K0_TO_K1(x) (CAST(unsigned)(x)|0xA0000000) /* kseg0 to kseg1 */ -#define K1_TO_K0(x) (CAST(unsigned)(x)&0x9FFFFFFF) /* kseg1 to kseg0 */ -#define K0_TO_PHYS(x) (CAST(unsigned)(x)&0x1FFFFFFF) /* kseg0 to physical */ -#define K1_TO_PHYS(x) (CAST(unsigned)(x)&0x1FFFFFFF) /* kseg1 to physical */ -#define PHYS_TO_K0(x) (CAST(unsigned)(x)|0x80000000) /* physical to kseg0 */ -#define PHYS_TO_K1(x) (CAST(unsigned)(x)|0xA0000000) /* physical to kseg1 */ - -/* -** Cache size constants -*/ -#define MINCACHE 0x200 /* 512 For 3041. */ -#define MAXCACHE 0x40000 /* 256*1024 256k */ - -#if defined(CPU_R4000) -/* R4000 configuration register definitions */ -#define CFG_CM 0x80000000 /* Master-Checker mode */ -#define CFG_ECMASK 0x70000000 /* System Clock Ratio */ -#define CFG_ECBY2 0x00000000 /* divide by 2 */ -#define CFG_ECBY3 0x10000000 /* divide by 3 */ -#define CFG_ECBY4 0x20000000 /* divide by 4 */ -#define CFG_EPMASK 0x0f000000 /* Transmit data pattern */ -#define CFG_EPD 0x00000000 /* D */ -#define CFG_EPDDX 0x01000000 /* DDX */ -#define CFG_EPDDXX 0x02000000 /* DDXX */ -#define CFG_EPDXDX 0x03000000 /* DXDX */ -#define CFG_EPDDXXX 0x04000000 /* DDXXX */ -#define CFG_EPDDXXXX 0x05000000 /* DDXXXX */ -#define CFG_EPDXXDXX 0x06000000 /* DXXDXX */ -#define CFG_EPDDXXXXX 0x07000000 /* DDXXXXX */ -#define CFG_EPDXXXDXXX 0x08000000 /* DXXXDXXX */ -#define CFG_SBMASK 0x00c00000 /* Secondary cache block size */ -#define CFG_SBSHIFT 22 -#define CFG_SB4 0x00000000 /* 4 words */ -#define CFG_SB8 0x00400000 /* 8 words */ -#define CFG_SB16 0x00800000 /* 16 words */ -#define CFG_SB32 0x00c00000 /* 32 words */ -#define CFG_SS 0x00200000 /* Split secondary cache */ -#define CFG_SW 0x00100000 /* Secondary cache port width */ -#define CFG_EWMASK 0x000c0000 /* System port width */ -#define CFG_EWSHIFT 18 -#define CFG_EW64 0x00000000 /* 64 bit */ -#define CFG_EW32 0x00010000 /* 32 bit */ -#define CFG_SC 0x00020000 /* Secondary cache absent */ -#define CFG_SM 0x00010000 /* Dirty Shared mode disabled */ -#define CFG_BE 0x00008000 /* Big Endian */ -#define CFG_EM 0x00004000 /* ECC mode enable */ -#define CFG_EB 0x00002000 /* Block ordering */ -#define CFG_ICMASK 0x00000e00 /* Instruction cache size */ -#define CFG_ICSHIFT 9 -#define CFG_DCMASK 0x000001c0 /* Data cache size */ -#define CFG_DCSHIFT 6 -#define CFG_IB 0x00000020 /* Instruction cache block size */ -#define CFG_DB 0x00000010 /* Data cache block size */ -#define CFG_CU 0x00000008 /* Update on Store Conditional */ -#define CFG_K0MASK 0x00000007 /* KSEG0 coherency algorithm */ - -/* - * R4000 primary cache mode - */ -#define CFG_C_UNCACHED 2 -#define CFG_C_NONCOHERENT 3 -#define CFG_C_COHERENTXCL 4 -#define CFG_C_COHERENTXCLW 5 -#define CFG_C_COHERENTUPD 6 - -/* - * R4000 cache operations (should be in assembler...?) - */ -#define Index_Invalidate_I 0x0 /* 0 0 */ -#define Index_Writeback_Inv_D 0x1 /* 0 1 */ -#define Index_Invalidate_SI 0x2 /* 0 2 */ -#define Index_Writeback_Inv_SD 0x3 /* 0 3 */ -#define Index_Load_Tag_I 0x4 /* 1 0 */ -#define Index_Load_Tag_D 0x5 /* 1 1 */ -#define Index_Load_Tag_SI 0x6 /* 1 2 */ -#define Index_Load_Tag_SD 0x7 /* 1 3 */ -#define Index_Store_Tag_I 0x8 /* 2 0 */ -#define Index_Store_Tag_D 0x9 /* 2 1 */ -#define Index_Store_Tag_SI 0xA /* 2 2 */ -#define Index_Store_Tag_SD 0xB /* 2 3 */ -#define Create_Dirty_Exc_D 0xD /* 3 1 */ -#define Create_Dirty_Exc_SD 0xF /* 3 3 */ -#define Hit_Invalidate_I 0x10 /* 4 0 */ -#define Hit_Invalidate_D 0x11 /* 4 1 */ -#define Hit_Invalidate_SI 0x12 /* 4 2 */ -#define Hit_Invalidate_SD 0x13 /* 4 3 */ -#define Hit_Writeback_Inv_D 0x15 /* 5 1 */ -#define Hit_Writeback_Inv_SD 0x17 /* 5 3 */ -#define Fill_I 0x14 /* 5 0 */ -#define Hit_Writeback_D 0x19 /* 6 1 */ -#define Hit_Writeback_SD 0x1B /* 6 3 */ -#define Hit_Writeback_I 0x18 /* 6 0 */ -#define Hit_Set_Virtual_SI 0x1E /* 7 2 */ -#define Hit_Set_Virtual_SD 0x1F /* 7 3 */ - -#ifndef WAIT -#define WAIT .word 0x42000020 -#endif WAIT - -#ifndef wait -#define wait .word 0x42000020 -#endif wait - -#endif - -/* -** TLB resource defines -*/ -#if defined(CPU_R3000) -#define N_TLB_ENTRIES 64 -#define TLB_PGSIZE 0x1000 -#define RANDBASE 8 -#define TLBLO_PFNMASK 0xfffff000 -#define TLBLO_PFNSHIFT 12 -#define TLBLO_N 0x800 /* non-cacheable */ -#define TLBLO_D 0x400 /* writeable */ -#define TLBLO_V 0x200 /* valid bit */ -#define TLBLO_G 0x100 /* global access bit */ - -#define TLBHI_VPNMASK 0xfffff000 -#define TLBHI_VPNSHIFT 12 -#define TLBHI_PIDMASK 0xfc0 -#define TLBHI_PIDSHIFT 6 -#define TLBHI_NPID 64 - -#define TLBINX_PROBE 0x80000000 -#define TLBINX_INXMASK 0x00003f00 -#define TLBINX_INXSHIFT 8 - -#define TLBRAND_RANDMASK 0x00003f00 -#define TLBRAND_RANDSHIFT 8 - -#define TLBCTXT_BASEMASK 0xffe00000 -#define TLBCTXT_BASESHIFT 21 - -#define TLBCTXT_VPNMASK 0x001ffffc -#define TLBCTXT_VPNSHIFT 2 -#endif -#if defined(CPU_R4000) -#define N_TLB_ENTRIES 48 - -#define TLBHI_VPN2MASK 0xffffe000 -#define TLBHI_PIDMASK 0x000000ff -#define TLBHI_NPID 256 - -#define TLBLO_PFNMASK 0x3fffffc0 -#define TLBLO_PFNSHIFT 6 -#define TLBLO_D 0x00000004 /* writeable */ -#define TLBLO_V 0x00000002 /* valid bit */ -#define TLBLO_G 0x00000001 /* global access bit */ -#define TLBLO_CMASK 0x00000038 /* cache algorithm mask */ -#define TLBLO_CSHIFT 3 - -#define TLBLO_UNCACHED (CFG_C_UNCACHED<<TLBLO_CSHIFT) -#define TLBLO_NONCOHERENT (CFG_C_NONCOHERENT<<TLBLO_CSHIFT) -#define TLBLO_COHERENTXCL (CFG_C_COHERENTXCL<<TLBLO_CSHIFT) -#define TLBLO_COHERENTXCLW (CFG_C_COHERENTXCLW<<TLBLO_CSHIFT) -#define TLBLO_COHERENTUPD (CFG_C_COHERENTUPD<<TLBLO_CSHIFT) - -#define TLBINX_PROBE 0x80000000 -#define TLBINX_INXMASK 0x0000003f - -#define TLBRAND_RANDMASK 0x0000003f - -#define TLBCTXT_BASEMASK 0xff800000 -#define TLBCTXT_BASESHIFT 23 - -#define TLBCTXT_VPN2MASK 0x007ffff0 -#define TLBCTXT_VPN2SHIFT 4 - -#define TLBPGMASK_MASK 0x01ffe000 -#endif - -#if defined(CPU_R3000) -#define SR_CUMASK 0xf0000000 /* coproc usable bits */ -#define SR_CU3 0x80000000 /* Coprocessor 3 usable */ -#define SR_CU2 0x40000000 /* Coprocessor 2 usable */ -#define SR_CU1 0x20000000 /* Coprocessor 1 usable */ -#define SR_CU0 0x10000000 /* Coprocessor 0 usable */ - -#define SR_BEV 0x00400000 /* use boot exception vectors */ - -/* Cache control bits */ -#define SR_TS 0x00200000 /* TLB shutdown */ -#define SR_PE 0x00100000 /* cache parity error */ -#define SR_CM 0x00080000 /* cache miss */ -#define SR_PZ 0x00040000 /* cache parity zero */ -#define SR_SWC 0x00020000 /* swap cache */ -#define SR_ISC 0x00010000 /* Isolate data cache */ - -/* -** status register interrupt masks and bits -*/ - -#define SR_IMASK 0x0000ff00 /* Interrupt mask */ -#define SR_IMASK8 0x00000000 /* mask level 8 */ -#define SR_IMASK7 0x00008000 /* mask level 7 */ -#define SR_IMASK6 0x0000c000 /* mask level 6 */ -#define SR_IMASK5 0x0000e000 /* mask level 5 */ -#define SR_IMASK4 0x0000f000 /* mask level 4 */ -#define SR_IMASK3 0x0000f800 /* mask level 3 */ -#define SR_IMASK2 0x0000fc00 /* mask level 2 */ -#define SR_IMASK1 0x0000fe00 /* mask level 1 */ -#define SR_IMASK0 0x0000ff00 /* mask level 0 */ - -#define SR_IMASKSHIFT 8 - -#define SR_IBIT8 0x00008000 /* bit level 8 */ -#define SR_IBIT7 0x00004000 /* bit level 7 */ -#define SR_IBIT6 0x00002000 /* bit level 6 */ -#define SR_IBIT5 0x00001000 /* bit level 5 */ -#define SR_IBIT4 0x00000800 /* bit level 4 */ -#define SR_IBIT3 0x00000400 /* bit level 3 */ -#define SR_IBIT2 0x00000200 /* bit level 2 */ -#define SR_IBIT1 0x00000100 /* bit level 1 */ - -#define SR_KUO 0x00000020 /* old kernel/user, 0 => k, 1 => u */ -#define SR_IEO 0x00000010 /* old interrupt enable, 1 => enable */ -#define SR_KUP 0x00000008 /* prev kernel/user, 0 => k, 1 => u */ -#define SR_IEP 0x00000004 /* prev interrupt enable, 1 => enable */ -#define SR_KUC 0x00000002 /* cur kernel/user, 0 => k, 1 => u */ -#define SR_IEC 0x00000001 /* cur interrupt enable, 1 => enable */ -#endif - -#if defined(CPU_R4000) -#define SR_CUMASK 0xf0000000 /* coproc usable bits */ -#define SR_CU3 0x80000000 /* Coprocessor 3 usable */ -#define SR_CU2 0x40000000 /* Coprocessor 2 usable */ -#define SR_CU1 0x20000000 /* Coprocessor 1 usable */ -#define SR_CU0 0x10000000 /* Coprocessor 0 usable */ - -#define SR_RP 0x08000000 /* Reduced power operation */ -#define SR_FR 0x04000000 /* Additional floating point registers */ -#define SR_RE 0x02000000 /* Reverse endian in user mode */ - -#define SR_BEV 0x00400000 /* Use boot exception vectors */ -#define SR_TS 0x00200000 /* TLB shutdown */ -#define SR_SR 0x00100000 /* Soft reset */ -#define SR_CH 0x00040000 /* Cache hit */ -#define SR_CE 0x00020000 /* Use cache ECC */ -#define SR_DE 0x00010000 /* Disable cache exceptions */ - -/* -** status register interrupt masks and bits -*/ - -#define SR_IMASK 0x0000ff00 /* Interrupt mask */ -#define SR_IMASK8 0x00000000 /* mask level 8 */ -#define SR_IMASK7 0x00008000 /* mask level 7 */ -#define SR_IMASK6 0x0000c000 /* mask level 6 */ -#define SR_IMASK5 0x0000e000 /* mask level 5 */ -#define SR_IMASK4 0x0000f000 /* mask level 4 */ -#define SR_IMASK3 0x0000f800 /* mask level 3 */ -#define SR_IMASK2 0x0000fc00 /* mask level 2 */ -#define SR_IMASK1 0x0000fe00 /* mask level 1 */ -#define SR_IMASK0 0x0000ff00 /* mask level 0 */ - -#define SR_IMASKSHIFT 8 - -#define SR_IBIT8 0x00008000 /* bit level 8 */ -#define SR_IBIT7 0x00004000 /* bit level 7 */ -#define SR_IBIT6 0x00002000 /* bit level 6 */ -#define SR_IBIT5 0x00001000 /* bit level 5 */ -#define SR_IBIT4 0x00000800 /* bit level 4 */ -#define SR_IBIT3 0x00000400 /* bit level 3 */ -#define SR_IBIT2 0x00000200 /* bit level 2 */ -#define SR_IBIT1 0x00000100 /* bit level 1 */ - -#define SR_KSMASK 0x00000018 /* Kernel mode mask */ -#define SR_KSUSER 0x00000010 /* User mode */ -#define SR_KSSUPER 0x00000008 /* Supervisor mode */ -#define SR_KSKERNEL 0x00000000 /* Kernel mode */ -#define SR_ERL 0x00000004 /* Error level */ -#define SR_EXL 0x00000002 /* Exception level */ -#define SR_IE 0x00000001 /* Interrupts enabled */ -#endif - - - -/* - * Cause Register - */ -#define CAUSE_BD 0x80000000 /* Branch delay slot */ -#define CAUSE_CEMASK 0x30000000 /* coprocessor error */ -#define CAUSE_CESHIFT 28 - - -#define CAUSE_IPMASK 0x0000FF00 /* Pending interrupt mask */ -#define CAUSE_IPSHIFT 8 - -#define CAUSE_EXCMASK 0x0000003C /* Cause code bits */ -#define CAUSE_EXCSHIFT 2 - -#ifndef XDS -/* -** Coprocessor 0 registers -*/ -#define C0_INX $0 /* tlb index */ -#define C0_RAND $1 /* tlb random */ -#if defined(CPU_R3000) -#define C0_TLBLO $2 /* tlb entry low */ -#endif -#if defined(CPU_R4000) -#define C0_TLBLO0 $2 /* tlb entry low 0 */ -#define C0_TLBLO1 $3 /* tlb entry low 1 */ -#endif - -#define C0_CTXT $4 /* tlb context */ - -#if defined(CPU_R4000) -#define C0_PAGEMASK $5 /* tlb page mask */ -#define C0_WIRED $6 /* number of wired tlb entries */ -#endif - -#define C0_BADVADDR $8 /* bad virtual address */ - -#if defined(CPU_R4000) -#define C0_COUNT $9 /* cycle count */ -#endif - -#define C0_TLBHI $10 /* tlb entry hi */ - -#if defined(CPU_R4000) -#define C0_COMPARE $11 /* cyccle count comparator */ -#endif - -#define C0_SR $12 /* status register */ -#define C0_CAUSE $13 /* exception cause */ -#define C0_EPC $14 /* exception pc */ -#define C0_PRID $15 /* revision identifier */ - -#if defined(CPU_R3000) -#define C0_CONFIG $3 /* configuration register R3081*/ -#endif - -#if defined(CPU_R4000) -#define C0_CONFIG $16 /* configuration register */ -#define C0_LLADDR $17 /* linked load address */ -#define C0_WATCHLO $18 /* watchpoint trap register */ -#define C0_WATCHHI $19 /* watchpoint trap register */ -#define C0_XCTXT $20 /* extended tlb context */ -#define C0_ECC $26 /* secondary cache ECC control */ -#define C0_CACHEERR $27 /* cache error status */ -#define C0_TAGLO $28 /* cache tag lo */ -#define C0_TAGHI $29 /* cache tag hi */ -#define C0_ERRPC $30 /* cache error pc */ -#endif - -#endif XDS - -#ifdef R4650 -#define IWATCH $18 -#define DWATCH $19 -#define IBASE $0 -#define IBOUND $1 -#define DBASE $2 -#define DBOUND $3 -#define CALG $17 -#endif - -#endif /* _IDTCPU_H__ */ - diff --git a/c/src/exec/score/cpu/mips/idtmon.h b/c/src/exec/score/cpu/mips/idtmon.h deleted file mode 100644 index b42211ed5c..0000000000 --- a/c/src/exec/score/cpu/mips/idtmon.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - -Based upon IDT provided code with the following release: - -This source code has been made available to you by IDT on an AS-IS -basis. Anyone receiving this source is licensed under IDT copyrights -to use it in any way he or she deems fit, including copying it, -modifying it, compiling it, and redistributing it either with or -without modifications. No license under IDT patents or patent -applications is to be implied by the copyright license. - -Any user of this software should understand that IDT cannot provide -technical support for this software and will not be responsible for -any consequences resulting from the use of this software. - -Any person who transfers this source code or any derivative work must -include the IDT copyright notice, this paragraph, and the preceeding -two paragraphs in the transferred software. - -COPYRIGHT IDT CORPORATION 1996 -LICENSED MATERIAL - PROGRAM PROPERTY OF IDT - - $Id$ -*/ - -/* -** idtmon.h - General header file for the IDT Prom Monitor -** -** Copyright 1989 Integrated Device Technology, Inc. -** All Rights Reserved. -** -** June 1989 - D.Cahoon -*/ -#ifndef __IDTMON_H__ -#define __IDTMON_H__ - -/* -** P_STACKSIZE is the size of the Prom Stack. -** the prom stack grows downward -*/ -#define P_STACKSIZE 0x2000 /* sets stack size to 8k */ - -/* -** M_BUSWIDTH -** Memory bus width (including bank interleaving) in bytes -** used when doing memory sizing to prevent bus capacitance -** reporting ghost memory locations -*/ -#if defined(CPU_R3000) -#define M_BUSWIDTH 8 /* 32bit memory bank interleaved */ -#endif -#if defined(CPU_R4000) -#define M_BUSWIDTH 16 /* 64 bit memory bank interleaved */ -#endif - -/* -** this is the default value for the number of bytes to add in calculating -** the checksums in the checksum command -*/ -#define CHK_SUM_CNT 0x20000 /* number of bytes to calc chksum for */ - -/* -** Monitor modes -*/ -#define MODE_MONITOR 5 /* IDT Prom Monitor is executing */ -#define MODE_USER 0xa /* USER is executing */ - -/* -** memory reference widths -*/ -#define SW_BYTE 1 -#define SW_HALFWORD 2 -#define SW_WORD 4 -#define SW_TRIBYTEL 12 -#define SW_TRIBYTER 20 - -#ifdef CPU_R4000 -/* -** definitions for select_cache call -*/ -#define DCACHE 0 -#define ICACHE 1 -#define SCACHE 2 - -#endif - -#if defined (CLANGUAGE) || defined(_LANGUAGE_C) -typedef struct { - unsigned int mem_size; - unsigned int icache_size; - unsigned int dcache_size; -#ifdef CPU_R4000 - unsigned int scache_size; -#endif - - } mem_config; - -#endif CLANGUAGE || defined(_LANGUAGE_C) - -/* -** general equates for diagnostics and boolean functions -*/ -#define PASS 0 -#define FAIL 1 - -#ifndef TRUE -#define TRUE 1 -#endif TRUE -#ifndef NULL -#define NULL 0 -#endif NULL - -#ifndef FALSE -#define FALSE 0 -#endif FALSE - - -/* -** portablility equates -*/ - -#ifndef BOOL -#define BOOL unsigned int -#endif BOOL - -#ifndef GLOBAL -#define GLOBAL /**/ -#endif GLOBAL - -#ifndef MLOCAL -#define MLOCAL static -#endif MLOCAL - - -#ifdef XDS -#define CONST const -#else -#define CONST -#endif XDS - -#define u_char unsigned char -#define u_short unsigned short -#define u_int unsigned int -/* -** assembly instructions for compatability between xds and mips -*/ -#ifndef XDS -#define sllv sll -#define srlv srl -#endif XDS -/* -** debugger macros for assembly language routines. Allows the -** programmer to set up the necessary stack frame info -** required by debuggers to do stack traces. -*/ - -#ifndef XDS -#define FRAME(name,frm_reg,offset,ret_reg) \ - .globl name; \ - .ent name; \ -name:; \ - .frame frm_reg,offset,ret_reg -#define ENDFRAME(name) \ - .end name -#else -#define FRAME(name,frm_reg,offset,ret_reg) \ - .globl _##name;\ -_##name: -#define ENDFRAME(name) -#endif XDS -#endif /* __IDTMON_H__ */ diff --git a/c/src/exec/score/cpu/mips/iregdef.h b/c/src/exec/score/cpu/mips/iregdef.h deleted file mode 100644 index f0953da852..0000000000 --- a/c/src/exec/score/cpu/mips/iregdef.h +++ /dev/null @@ -1,325 +0,0 @@ -/* - -Based upon IDT provided code with the following release: - -This source code has been made available to you by IDT on an AS-IS -basis. Anyone receiving this source is licensed under IDT copyrights -to use it in any way he or she deems fit, including copying it, -modifying it, compiling it, and redistributing it either with or -without modifications. No license under IDT patents or patent -applications is to be implied by the copyright license. - -Any user of this software should understand that IDT cannot provide -technical support for this software and will not be responsible for -any consequences resulting from the use of this software. - -Any person who transfers this source code or any derivative work must -include the IDT copyright notice, this paragraph, and the preceeding -two paragraphs in the transferred software. - -COPYRIGHT IDT CORPORATION 1996 -LICENSED MATERIAL - PROGRAM PROPERTY OF IDT - - $Id$ -*/ - -/* -** iregdef.h - IDT R3000 register structure header file -** -** Copyright 1989 Integrated Device Technology, Inc -** All Rights Reserved -** -*/ -#ifndef __IREGDEF_H__ -#define __IREGDEF_H__ - -/* - * 950313: Ketan added sreg/lreg and R_SZ for 64-bit saves - * added Register definition for XContext reg. - * Look towards end of this file. - */ -/* -** register names -*/ -#define r0 $0 -#define r1 $1 -#define r2 $2 -#define r3 $3 -#define r4 $4 -#define r5 $5 -#define r6 $6 -#define r7 $7 -#define r8 $8 -#define r9 $9 -#define r10 $10 -#define r11 $11 -#define r12 $12 -#define r13 $13 - -#define r14 $14 -#define r15 $15 -#define r16 $16 -#define r17 $17 -#define r18 $18 -#define r19 $19 -#define r20 $20 -#define r21 $21 -#define r22 $22 -#define r23 $23 -#define r24 $24 -#define r25 $25 -#define r26 $26 -#define r27 $27 -#define r28 $28 -#define r29 $29 -#define r30 $30 -#define r31 $31 - -#define fp0 $f0 -#define fp1 $f1 -#define fp2 $f2 -#define fp3 $f3 -#define fp4 $f4 -#define fp5 $f5 -#define fp6 $f6 -#define fp7 $f7 -#define fp8 $f8 -#define fp9 $f9 -#define fp10 $f10 -#define fp11 $f11 -#define fp12 $f12 -#define fp13 $f13 -#define fp14 $f14 -#define fp15 $f15 -#define fp16 $f16 -#define fp17 $f17 -#define fp18 $f18 -#define fp19 $f19 -#define fp20 $f20 -#define fp21 $f21 -#define fp22 $f22 -#define fp23 $f23 -#define fp24 $f24 -#define fp25 $f25 -#define fp26 $f26 -#define fp27 $f27 -#define fp28 $f28 -#define fp29 $f29 -#define fp30 $f30 -#define fp31 $f31 - -#define fcr0 $0 -#define fcr30 $30 -#define fcr31 $31 - -#define zero $0 /* wired zero */ -#define AT $at /* assembler temp */ -#define v0 $2 /* return value */ -#define v1 $3 -#define a0 $4 /* argument registers a0-a3 */ -#define a1 $5 -#define a2 $6 -#define a3 $7 -#define t0 $8 /* caller saved t0-t9 */ -#define t1 $9 -#define t2 $10 -#define t3 $11 -#define t4 $12 -#define t5 $13 -#define t6 $14 -#define t7 $15 -#define s0 $16 /* callee saved s0-s8 */ -#define s1 $17 -#define s2 $18 -#define s3 $19 -#define s4 $20 -#define s5 $21 -#define s6 $22 -#define s7 $23 -#define t8 $24 -#define t9 $25 -#define k0 $26 /* kernel usage */ -#define k1 $27 /* kernel usage */ -#define gp $28 /* sdata pointer */ -#define sp $29 /* stack pointer */ -#define s8 $30 /* yet another saved reg for the callee */ -#define fp $30 /* frame pointer - this is being phased out by MIPS */ -#define ra $31 /* return address */ - - -/* -** relative position of registers in save reg area -*/ -#define R_R0 0 -#define R_R1 1 -#define R_R2 2 -#define R_R3 3 -#define R_R4 4 -#define R_R5 5 -#define R_R6 6 -#define R_R7 7 -#define R_R8 8 -#define R_R9 9 -#define R_R10 10 -#define R_R11 11 -#define R_R12 12 -#define R_R13 13 -#define R_R14 14 -#define R_R15 15 -#define R_R16 16 -#define R_R17 17 -#define R_R18 18 -#define R_R19 19 -#define R_R20 20 -#define R_R21 21 -#define R_R22 22 -#define R_R23 23 -#define R_R24 24 -#define R_R25 25 -#define R_R26 26 -#define R_R27 27 -#define R_R28 28 -#define R_R29 29 -#define R_R30 30 -#define R_R31 31 -#define R_F0 32 -#define R_F1 33 -#define R_F2 34 -#define R_F3 35 -#define R_F4 36 -#define R_F5 37 -#define R_F6 38 -#define R_F7 39 -#define R_F8 40 -#define R_F9 41 -#define R_F10 42 -#define R_F11 43 -#define R_F12 44 -#define R_F13 45 -#define R_F14 46 -#define R_F15 47 -#define R_F16 48 -#define R_F17 49 -#define R_F18 50 -#define R_F19 51 -#define R_F20 52 -#define R_F21 53 -#define R_F22 54 -#define R_F23 55 -#define R_F24 56 -#define R_F25 57 -#define R_F26 58 -#define R_F27 59 -#define R_F28 60 -#define R_F29 61 -#define R_F30 62 -#define R_F31 63 -#define NCLIENTREGS 64 -#define R_EPC 64 -#define R_MDHI 65 -#define R_MDLO 66 -#define R_SR 67 -#define R_CAUSE 68 -#define R_TLBHI 69 -#if defined(CPU_R3000) -#define R_TLBLO 70 -#endif -#if defined(CPU_R4000) -#define R_TLBLO0 70 -#endif -#define R_BADVADDR 71 -#define R_INX 72 -#define R_RAND 73 -#define R_CTXT 74 -#define R_EXCTYPE 75 -#define R_MODE 76 -#define R_PRID 77 -#define R_FCSR 78 -#define R_FEIR 79 -#if defined(CPU_R3000) -#define NREGS 80 -#endif -#if defined(CPU_R4000) -#define R_TLBLO1 80 -#define R_PAGEMASK 81 -#define R_WIRED 82 -#define R_COUNT 83 -#define R_COMPARE 84 -#define R_CONFIG 85 -#define R_LLADDR 86 -#define R_WATCHLO 87 -#define R_WATCHHI 88 -#define R_ECC 89 -#define R_CACHEERR 90 -#define R_TAGLO 91 -#define R_TAGHI 92 -#define R_ERRPC 93 -#define R_XCTXT 94 /* Ketan added from SIM64bit */ - -#define NREGS 95 -#endif - -/* -** For those who like to think in terms of the compiler names for the regs -*/ -#define R_ZERO R_R0 -#define R_AT R_R1 -#define R_V0 R_R2 -#define R_V1 R_R3 -#define R_A0 R_R4 -#define R_A1 R_R5 -#define R_A2 R_R6 -#define R_A3 R_R7 -#define R_T0 R_R8 -#define R_T1 R_R9 -#define R_T2 R_R10 -#define R_T3 R_R11 -#define R_T4 R_R12 -#define R_T5 R_R13 -#define R_T6 R_R14 -#define R_T7 R_R15 -#define R_S0 R_R16 -#define R_S1 R_R17 -#define R_S2 R_R18 -#define R_S3 R_R19 -#define R_S4 R_R20 -#define R_S5 R_R21 -#define R_S6 R_R22 -#define R_S7 R_R23 -#define R_T8 R_R24 -#define R_T9 R_R25 -#define R_K0 R_R26 -#define R_K1 R_R27 -#define R_GP R_R28 -#define R_SP R_R29 -#define R_FP R_R30 -#define R_RA R_R31 - -/* Ketan added the following */ -#ifdef CPU_R3000 -#define sreg sw -#define lreg lw -#define rmfc0 mfc0 -#define rmtc0 mtc0 -#define R_SZ 4 -#endif CPU_R3000 - -#ifdef CPU_R4000 -#if __mips < 3 -#define sreg sw -#define lreg lw -#define rmfc0 mfc0 -#define rmtc0 mtc0 -#define R_SZ 4 -#else -#define sreg sd -#define lreg ld -#define rmfc0 dmfc0 -#define rmtc0 dmtc0 -#define R_SZ 8 -#endif -#endif CPU_R4000 -/* Ketan till here */ - -#endif /* __IREGDEF_H__ */ - diff --git a/c/src/exec/score/cpu/mips/rtems.c b/c/src/exec/score/cpu/mips/rtems.c deleted file mode 100644 index 356f1b8b9e..0000000000 --- a/c/src/exec/score/cpu/mips/rtems.c +++ /dev/null @@ -1,53 +0,0 @@ -/* rtems.c ===> rtems.S or rtems.s - * - * This file contains the single entry point code for - * the XXX implementation of RTEMS. - * - * NOTE: This is supposed to be a .S or .s file NOT a C file. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -/* - * Rather than deleting this, it is commented out to (hopefully) help - * the submitter send updates. - * - * static char _sccsid[] = "@(#)rtems.c 03/15/96 1.1\n"; - */ - - -/* - * This is supposed to be an assembly file. This means that system.h - * and cpu.h should not be included in a "real" rtems file. - */ - -#include <rtems/system.h> -#include <rtems/score/cpu.h> -/* #include "asm.h> */ - -/* - * RTEMS - * - * This routine jumps to the directive indicated in the - * CPU defined register. This routine is used when RTEMS is - * linked by itself and placed in ROM. This routine is the - * first address in the ROM space for RTEMS. The user "calls" - * this address with the directive arguments in the normal place. - * This routine then jumps indirectly to the correct directive - * preserving the arguments. The directive should not realize - * it has been "wrapped" in this way. The table "_Entry_points" - * is used to look up the directive. - */ - -void RTEMS() -{ -} - diff --git a/c/src/exec/score/cpu/mips64orion/Makefile.in b/c/src/exec/score/cpu/mips64orion/Makefile.in deleted file mode 100644 index 21985cd257..0000000000 --- a/c/src/exec/score/cpu/mips64orion/Makefile.in +++ /dev/null @@ -1,82 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - -RELS=$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -# Normally cpu_asm and rtems are assembly files -C_PIECES=cpu rtems -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) - -H_FILES=$(srcdir)/cpu.h $(srcdir)/mips64orion.h $(srcdir)/mipstypes.h \ - $(srcdir)/idtcpu.h $(srcdir)/iregdef.h $(srcdir)/idtmon.h - -# H_FILES that get installed externally -EXTERNAL_H_FILES = $(srcdir)/asm.h - -# Assembly source names, if any, go here -- minus the .s -# Normally cpu_asm and rtems are assembly files -S_PIECES=cpu_asm -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) - -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(RELS) - $(INSTALL_VARIANT) -m 444 $(RELS) ${PROJECT_RELEASE}/lib - -$(ARCH)/rtems-cpu.rel: $(OBJS) - $(make-rel) - -# Install the program(s), appending _g or _p as appropriate. -# for include files, just use $(INSTALL) - -preinstall: $(ARCH) $(PROJECT_INCLUDE)/rtems/score/targopts.h \ - ${PROJECT_RELEASE}/lib/bsp_specs - $(INSTALL) -m 444 ${H_FILES} $(PROJECT_INCLUDE)/rtems/score -# we will share the basic cpu file - $(INSTALL) -m 444 ${EXTERNAL_H_FILES} $(PROJECT_INCLUDE) - -$(PROJECT_INCLUDE)/rtems/score/targopts.h: $(ARCH)/targopts.h-tmp - $(INSTALL) -m 444 $(ARCH)/targopts.h-tmp $@ - -# $(ARCH)/targopts.h-tmp rule is in leaf.cfg - -${PROJECT_RELEASE}/lib/bsp_specs: $(ARCH)/bsp_specs.tmp - $(INSTALL) -m 444 $(ARCH)/bsp_specs.tmp $@ - -# $(ARCH)/bsp_specs.tmp rule is in leaf.cfg diff --git a/c/src/exec/score/cpu/mips64orion/asm.h b/c/src/exec/score/cpu/mips64orion/asm.h deleted file mode 100644 index fccd89069f..0000000000 --- a/c/src/exec/score/cpu/mips64orion/asm.h +++ /dev/null @@ -1,102 +0,0 @@ -/* asm.h - * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. - * - * - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - * - * COPYRIGHT: - * - * This file is based on similar code found in newlib available - * from ftp.cygnus.com. The file which was used had no copyright - * notice. This file is freely distributable as long as the source - * of the file is noted. This file is: - * - * COPYRIGHT (c) 1994-1997. - * On-Line Applications Research Corporation (OAR). - * - * $Id$ - */ -/* @(#)asm.h 03/15/96 1.1 */ - -#ifndef __NO_CPU_ASM_h -#define __NO_CPU_ASM_h - -/* - * Indicate we are in an assembly file and get the basic CPU definitions. - */ - -#ifndef ASM -#define ASM -#endif -#include <rtems/score/targopts.h> -#include <rtems/score/no_cpu.h> - -/* - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. - */ - -#ifndef __USER_LABEL_PREFIX__ -#define __USER_LABEL_PREFIX__ _ -#endif - -#ifndef __REGISTER_PREFIX__ -#define __REGISTER_PREFIX__ -#endif - -/* ANSI concatenation macros. */ - -#define CONCAT1(a, b) CONCAT2(a, b) -#define CONCAT2(a, b) a ## b - -/* Use the right prefix for global labels. */ - -#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) - -/* Use the right prefix for registers. */ - -#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) - -/* - * define macros for all of the registers on this CPU - * - * EXAMPLE: #define d0 REG (d0) - */ - -/* - * Define macros to handle section beginning and ends. - */ - - -#define BEGIN_CODE_DCL .text -#define END_CODE_DCL -#define BEGIN_DATA_DCL .data -#define END_DATA_DCL -#define BEGIN_CODE .text -#define END_CODE -#define BEGIN_DATA -#define END_DATA -#define BEGIN_BSS -#define END_BSS -#define END - -/* - * Following must be tailor for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. - */ - -#define PUBLIC(sym) .globl SYM (sym) -#define EXTERN(sym) .globl SYM (sym) - -#endif -/* end of include file */ - - diff --git a/c/src/exec/score/cpu/mips64orion/cpu.c b/c/src/exec/score/cpu/mips64orion/cpu.c deleted file mode 100644 index 4617be460d..0000000000 --- a/c/src/exec/score/cpu/mips64orion/cpu.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * Mips CPU Dependent Source - * - * Author: Craig Lebakken <craigl@transition.com> - * - * COPYRIGHT (c) 1996 by Transition Networks Inc. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of Transition Networks not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * Transition Networks makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/score/cpu/no_cpu/cpu.c: - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -/* - * Rather than deleting this, it is commented out to (hopefully) help - * the submitter send updates. - * - * static char _sccsid[] = "@(#)cpu.c 08/20/96 1.5\n"; - */ - -#include <rtems/system.h> -#include <rtems/score/isr.h> -#include <rtems/score/wkspace.h> - - -ISR_Handler_entry _ISR_Vector_table[ ISR_NUMBER_OF_VECTORS ]; - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: - * cpu_table - CPU table to initialize - * thread_dispatch - address of disptaching routine - */ - - -void null_handler( void ) -{ -} - - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) /* ignored on this CPU */ -) -{ - unsigned int i = ISR_NUMBER_OF_VECTORS; - - while ( i-- ) - { - _ISR_Vector_table[i] = (ISR_Handler_entry)null_handler; - } - - /* - * The thread_dispatch argument is the address of the entry point - * for the routine called at the end of an ISR once it has been - * decided a context switch is necessary. On some compilation - * systems it is difficult to call a high-level language routine - * from assembly. This allows us to trick these systems. - * - * If you encounter this problem save the entry point in a CPU - * dependent variable. - */ - - _CPU_Thread_dispatch_pointer = thread_dispatch; - - /* - * If there is not an easy way to initialize the FP context - * during Context_Initialize, then it is usually easier to - * save an "uninitialized" FP context here and copy it to - * the task's during Context_Initialize. - */ - - /* FP context initialization support goes here */ - - _CPU_Table = *cpu_table; - -} - -/*PAGE - * - * _CPU_ISR_Get_level - */ - -#if 0 /* located in cpu_asm.S */ -unsigned32 _CPU_ISR_Get_level( void ) -{ - /* - * This routine returns the current interrupt level. - */ -} -#endif - -/*PAGE - * - * _CPU_ISR_install_raw_handler - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - /* - * This is where we install the interrupt handler into the "raw" interrupt - * table used by the CPU to dispatch interrupt handlers. - */ - -#if 0 /* not necessary */ -/* use IDT/Sim to set interrupt vector. Needed to co-exist with debugger. */ - add_ext_int_func( vector, new_handler ); -#endif -} - -/*PAGE - * - * _CPU_ISR_install_vector - * - * This kernel routine installs the RTEMS handler for the - * specified vector. - * - * Input parameters: - * vector - interrupt vector number - * old_handler - former ISR for this vector number - * new_handler - replacement ISR for this vector number - * - * Output parameters: NONE - * - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - *old_handler = _ISR_Vector_table[ vector ]; - - /* - * If the interrupt vector table is a table of pointer to isr entry - * points, then we need to install the appropriate RTEMS interrupt - * handler for this vector number. - */ - - _CPU_ISR_install_raw_handler( vector, _ISR_Handler, old_handler ); - - /* - * We put the actual user ISR address in '_ISR_vector_table'. This will - * be used by the _ISR_Handler so the user gets control. - */ - - _ISR_Vector_table[ vector ] = new_handler; -} - -/*PAGE - * - * _CPU_Install_interrupt_stack - */ - -void _CPU_Install_interrupt_stack( void ) -{ -/* we don't support this yet */ -} - -/*PAGE - * - * _CPU_Internal_threads_Idle_thread_body - * - * NOTES: - * - * 1. This is the same as the regular CPU independent algorithm. - * - * 2. If you implement this using a "halt", "idle", or "shutdown" - * instruction, then don't forget to put it in an infinite loop. - * - * 3. Be warned. Some processors with onboard DMA have been known - * to stop the DMA if the CPU were put in IDLE mode. This might - * also be a problem with other on-chip peripherals. So use this - * hook with caution. - */ - -#if 0 /* located in cpu_asm.S */ -void _CPU_Thread_Idle_body( void ) -{ - - for( ; ; ) - /* insert your "halt" instruction here */ ; -} -#endif - -extern void mips_break( int error ); - -#include <stdio.h> - -void mips_fatal_error( int error ) -{ - printf("fatal error 0x%x %d\n",error,error); - mips_break( error ); -} diff --git a/c/src/exec/score/cpu/mips64orion/cpu.h b/c/src/exec/score/cpu/mips64orion/cpu.h deleted file mode 100644 index 0dfa3b0e98..0000000000 --- a/c/src/exec/score/cpu/mips64orion/cpu.h +++ /dev/null @@ -1,969 +0,0 @@ -/* cpu.h - * - * This include file contains information pertaining to the IDT 4650 - * processor. - * - * Author: Craig Lebakken <craigl@transition.com> - * - * COPYRIGHT (c) 1996 by Transition Networks Inc. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of Transition Networks not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * Transition Networks makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/score/cpu/no_cpu/cpu.h: - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ -/* @(#)cpu.h 08/29/96 1.7 */ - -#ifndef __CPU_h -#define __CPU_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/score/mips64orion.h> /* pick up machine definitions */ -#ifndef ASM -#include <rtems/score/mipstypes.h> -#endif - -extern int mips_disable_interrupts( void ); -extern void mips_enable_interrupts( int _level ); -extern int mips_disable_global_interrupts( void ); -extern void mips_enable_global_interrupts( void ); -extern void mips_fatal_error ( int error ); - -/* conditional compilation parameters */ - -/* - * Should the calls to _Thread_Enable_dispatch be inlined? - * - * If TRUE, then they are inlined. - * If FALSE, then a subroutine call is made. - * - * Basically this is an example of the classic trade-off of size - * versus speed. Inlining the call (TRUE) typically increases the - * size of RTEMS while speeding up the enabling of dispatching. - * [NOTE: In general, the _Thread_Dispatch_disable_level will - * only be 0 or 1 unless you are in an interrupt handler and that - * interrupt handler invokes the executive.] When not inlined - * something calls _Thread_Enable_dispatch which in turns calls - * _Thread_Dispatch. If the enable dispatch is inlined, then - * one subroutine call is avoided entirely.] - */ - -#define CPU_INLINE_ENABLE_DISPATCH TRUE - -/* - * Should the body of the search loops in _Thread_queue_Enqueue_priority - * be unrolled one time? In unrolled each iteration of the loop examines - * two "nodes" on the chain being searched. Otherwise, only one node - * is examined per iteration. - * - * If TRUE, then the loops are unrolled. - * If FALSE, then the loops are not unrolled. - * - * The primary factor in making this decision is the cost of disabling - * and enabling interrupts (_ISR_Flash) versus the cost of rest of the - * body of the loop. On some CPUs, the flash is more expensive than - * one iteration of the loop body. In this case, it might be desirable - * to unroll the loop. It is important to note that on some CPUs, this - * code is the longest interrupt disable period in RTEMS. So it is - * necessary to strike a balance when setting this parameter. - */ - -#define CPU_UNROLL_ENQUEUE_PRIORITY TRUE - -/* - * Does RTEMS manage a dedicated interrupt stack in software? - * - * If TRUE, then a stack is allocated in _Interrupt_Manager_initialization. - * If FALSE, nothing is done. - * - * If the CPU supports a dedicated interrupt stack in hardware, - * then it is generally the responsibility of the BSP to allocate it - * and set it up. - * - * If the CPU does not support a dedicated interrupt stack, then - * the porter has two options: (1) execute interrupts on the - * stack of the interrupted task, and (2) have RTEMS manage a dedicated - * interrupt stack. - * - * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - */ - -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK FALSE - -/* - * Does this CPU have hardware support for a dedicated interrupt stack? - * - * If TRUE, then it must be installed during initialization. - * If FALSE, then no installation is performed. - * - * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - */ - -#define CPU_HAS_HARDWARE_INTERRUPT_STACK FALSE - -/* - * Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager? - * - * If TRUE, then the memory is allocated during initialization. - * If FALSE, then the memory is allocated during initialization. - * - * This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE - * or CPU_INSTALL_HARDWARE_INTERRUPT_STACK is TRUE. - */ - -#define CPU_ALLOCATE_INTERRUPT_STACK FALSE - -/* - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? - */ - -#define CPU_ISR_PASSES_FRAME_POINTER 0 - -/* - * Does the CPU have hardware floating point? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored. - * - * If there is a FP coprocessor such as the i387 or mc68881, then - * the answer is TRUE. - * - * The macro name "MIPS64ORION_HAS_FPU" should be made CPU specific. - * It indicates whether or not this CPU model has FP support. For - * example, it would be possible to have an i386_nofp CPU model - * which set this to false to indicate that you have an i386 without - * an i387 and wish to leave floating point support out of RTEMS. - */ - -#if ( MIPS64ORION_HAS_FPU == 1 ) -#define CPU_HARDWARE_FP TRUE -#else -#define CPU_HARDWARE_FP FALSE -#endif - -/* - * Are all tasks RTEMS_FLOATING_POINT tasks implicitly? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed. - * - * So far, the only CPU in which this option has been used is the - * HP PA-RISC. The HP C compiler and gcc both implicitly use the - * floating point registers to perform integer multiplies. If - * a function which you would not think utilize the FP unit DOES, - * then one can not easily predict which tasks will use the FP hardware. - * In this case, this option should be TRUE. - * - * If CPU_HARDWARE_FP is FALSE, then this should be FALSE as well. - */ - -#define CPU_ALL_TASKS_ARE_FP FALSE - -/* - * Should the IDLE task have a floating point context? - * - * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task - * and it has a floating point context which is switched in and out. - * If FALSE, then the IDLE task does not have a floating point context. - * - * Setting this to TRUE negatively impacts the time required to preempt - * the IDLE task from an interrupt because the floating point context - * must be saved as part of the preemption. - */ - -#define CPU_IDLE_TASK_IS_FP FALSE - -/* - * Should the saving of the floating point registers be deferred - * until a context switch is made to another different floating point - * task? - * - * If TRUE, then the floating point context will not be stored until - * necessary. It will remain in the floating point registers and not - * disturned until another floating point task is switched to. - * - * If FALSE, then the floating point context is saved when a floating - * point task is switched out and restored when the next floating point - * task is restored. The state of the floating point registers between - * those two operations is not specified. - * - * If the floating point context does NOT have to be saved as part of - * interrupt dispatching, then it should be safe to set this to TRUE. - * - * Setting this flag to TRUE results in using a different algorithm - * for deciding when to save and restore the floating point context. - * The deferred FP switch algorithm minimizes the number of times - * the FP context is saved and restored. The FP context is not saved - * until a context switch is made to another, different FP task. - * Thus in a system with only one FP task, the FP context will never - * be saved or restored. - */ - -#define CPU_USE_DEFERRED_FP_SWITCH TRUE - -/* - * Does this port provide a CPU dependent IDLE task implementation? - * - * If TRUE, then the routine _CPU_Internal_threads_Idle_thread_body - * must be provided and is the default IDLE thread body instead of - * _Internal_threads_Idle_thread_body. - * - * If FALSE, then use the generic IDLE thread body if the BSP does - * not provide one. - * - * This is intended to allow for supporting processors which have - * a low power or idle mode. When the IDLE thread is executed, then - * the CPU can be powered down. - * - * The order of precedence for selecting the IDLE thread body is: - * - * 1. BSP provided - * 2. CPU dependent (if provided) - * 3. generic (if no BSP and no CPU dependent) - */ - -/* we can use the low power wait instruction for the IDLE thread */ -#define CPU_PROVIDES_IDLE_THREAD_BODY TRUE - -/* - * Does the stack grow up (toward higher addresses) or down - * (toward lower addresses)? - * - * If TRUE, then the grows upward. - * If FALSE, then the grows toward smaller addresses. - */ - -/* our stack grows down */ -#define CPU_STACK_GROWS_UP FALSE - -/* - * The following is the variable attribute used to force alignment - * of critical RTEMS structures. On some processors it may make - * sense to have these aligned on tighter boundaries than - * the minimum requirements of the compiler in order to have as - * much of the critical data area as possible in a cache line. - * - * The placement of this macro in the declaration of the variables - * is based on the syntactically requirements of the GNU C - * "__attribute__" extension. For example with GNU C, use - * the following to force a structures to a 32 byte boundary. - * - * __attribute__ ((aligned (32))) - * - * NOTE: Currently only the Priority Bit Map table uses this feature. - * To benefit from using this, the data must be heavily - * used so it will stay in the cache and used frequently enough - * in the executive to justify turning this on. - */ - -/* our cache line size is 16 bytes */ -#if __GNUC__ -#define CPU_STRUCTURE_ALIGNMENT __attribute__ ((aligned (16))) -#else -#define CPU_STRUCTURE_ALIGNMENT -#endif - -/* - * Define what is required to specify how the network to host conversion - * routines are handled. - */ - -#define CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE -#define CPU_BIG_ENDIAN TRUE -#define CPU_LITTLE_ENDIAN FALSE - -/* - * The following defines the number of bits actually used in the - * interrupt field of the task mode. How those bits map to the - * CPU interrupt levels is defined by the routine _CPU_ISR_Set_level(). - */ - -#define CPU_MODES_INTERRUPT_MASK 0x00000001 - -/* - * Processor defined structures - * - * Examples structures include the descriptor tables from the i386 - * and the processor control structure on the i960ca. - */ - -/* may need to put some structures here. */ - -/* - * Contexts - * - * Generally there are 2 types of context to save. - * 1. Interrupt registers to save - * 2. Task level registers to save - * - * This means we have the following 3 context items: - * 1. task level context stuff:: Context_Control - * 2. floating point task stuff:: Context_Control_fp - * 3. special interrupt level context :: Context_Control_interrupt - * - * On some processors, it is cost-effective to save only the callee - * preserved registers during a task context switch. This means - * that the ISR code needs to save those registers which do not - * persist across function calls. It is not mandatory to make this - * distinctions between the caller/callee saves registers for the - * purpose of minimizing context saved during task switch and on interrupts. - * If the cost of saving extra registers is minimal, simplicity is the - * choice. Save the same context on interrupt entry as for tasks in - * this case. - * - * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then - * care should be used in designing the context area. - * - * On some CPUs with hardware floating point support, the Context_Control_fp - * structure will not be used or it simply consist of an array of a - * fixed number of bytes. This is done when the floating point context - * is dumped by a "FP save context" type instruction and the format - * is not really defined by the CPU. In this case, there is no need - * to figure out the exact format -- only the size. Of course, although - * this is enough information for RTEMS, it is probably not enough for - * a debugger such as gdb. But that is another problem. - */ - -/* WARNING: If this structure is modified, the constants in cpu.h must be updated. */ -typedef struct { - unsigned64 s0; - unsigned64 s1; - unsigned64 s2; - unsigned64 s3; - unsigned64 s4; - unsigned64 s5; - unsigned64 s6; - unsigned64 s7; - unsigned64 sp; - unsigned64 fp; - unsigned64 ra; - unsigned64 c0_sr; - unsigned64 c0_epc; -} Context_Control; - -/* WARNING: If this structure is modified, the constants in cpu.h must be updated. */ -typedef struct { - unsigned32 fp0; - unsigned32 fp1; - unsigned32 fp2; - unsigned32 fp3; - unsigned32 fp4; - unsigned32 fp5; - unsigned32 fp6; - unsigned32 fp7; - unsigned32 fp8; - unsigned32 fp9; - unsigned32 fp10; - unsigned32 fp11; - unsigned32 fp12; - unsigned32 fp13; - unsigned32 fp14; - unsigned32 fp15; - unsigned32 fp16; - unsigned32 fp17; - unsigned32 fp18; - unsigned32 fp19; - unsigned32 fp20; - unsigned32 fp21; - unsigned32 fp22; - unsigned32 fp23; - unsigned32 fp24; - unsigned32 fp25; - unsigned32 fp26; - unsigned32 fp27; - unsigned32 fp28; - unsigned32 fp29; - unsigned32 fp30; - unsigned32 fp31; -} Context_Control_fp; - -typedef struct { - unsigned32 special_interrupt_register; -} CPU_Interrupt_frame; - - -/* - * The following table contains the information required to configure - * the mips processor specific parameters. - */ - -typedef struct { - void (*pretasking_hook)( void ); - void (*predriver_hook)( void ); - void (*postdriver_hook)( void ); - void (*idle_task)( void ); - boolean do_zero_of_workspace; - unsigned32 idle_task_stack_size; - unsigned32 interrupt_stack_size; - unsigned32 extra_mpci_receive_server_stack; - void * (*stack_allocate_hook)( unsigned32 ); - void (*stack_free_hook)( void* ); - /* end of fields required on all CPUs */ - - unsigned32 some_other_cpu_dependent_info; -} rtems_cpu_table; - -/* - * This variable is optional. It is used on CPUs on which it is difficult - * to generate an "uninitialized" FP context. It is filled in by - * _CPU_Initialize and copied into the task's FP context area during - * _CPU_Context_Initialize. - */ - -SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context; - -/* - * On some CPUs, RTEMS supports a software managed interrupt stack. - * This stack is allocated by the Interrupt Manager and the switch - * is performed in _ISR_Handler. These variables contain pointers - * to the lowest and highest addresses in the chunk of memory allocated - * for the interrupt stack. Since it is unknown whether the stack - * grows up or down (in general), this give the CPU dependent - * code the option of picking the version it wants to use. - * - * NOTE: These two variables are required if the macro - * CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE. - */ - -SCORE_EXTERN void *_CPU_Interrupt_stack_low; -SCORE_EXTERN void *_CPU_Interrupt_stack_high; - -/* - * With some compilation systems, it is difficult if not impossible to - * call a high-level language routine from assembly language. This - * is especially true of commercial Ada compilers and name mangling - * C++ ones. This variable can be optionally defined by the CPU porter - * and contains the address of the routine _Thread_Dispatch. This - * can make it easier to invoke that routine at the end of the interrupt - * sequence (if a dispatch is necessary). - */ - -SCORE_EXTERN void (*_CPU_Thread_dispatch_pointer)(); - -/* - * Nothing prevents the porter from declaring more CPU specific variables. - */ - -/* XXX: if needed, put more variables here */ - -/* - * The size of the floating point context area. On some CPUs this - * will not be a "sizeof" because the format of the floating point - * area is not defined -- only the size is. This is usually on - * CPUs with a "floating point save context" instruction. - */ - -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) - -/* - * Amount of extra stack (above minimum stack size) required by - * system initialization thread. Remember that in a multiprocessor - * system the system intialization thread becomes the MP server thread. - */ - -#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0 - -/* - * This defines the number of entries in the ISR_Vector_table managed - * by RTEMS. - */ - -#define CPU_INTERRUPT_NUMBER_OF_VECTORS 8 -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) - -/* - * Should be large enough to run all RTEMS tests. This insures - * that a "reasonable" small application should not have any problems. - */ - -#define CPU_STACK_MINIMUM_SIZE (2048*sizeof(unsigned32)) - -/* - * CPU's worst alignment requirement for data types on a byte boundary. This - * alignment does not take into account the requirements for the stack. - */ - -#define CPU_ALIGNMENT 8 - -/* - * This number corresponds to the byte alignment requirement for the - * heap handler. This alignment requirement may be stricter than that - * for the data types alignment specified by CPU_ALIGNMENT. It is - * common for the heap to follow the same alignment requirement as - * CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict enough for the heap, - * then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for memory - * buffers allocated by the partition manager. This alignment requirement - * may be stricter than that for the data types alignment specified by - * CPU_ALIGNMENT. It is common for the partition to follow the same - * alignment requirement as CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict - * enough for the partition, then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for the - * stack. This alignment requirement may be stricter than that for the - * data types alignment specified by CPU_ALIGNMENT. If the CPU_ALIGNMENT - * is strict enough for the stack, then this should be set to 0. - * - * NOTE: This must be a power of 2 either 0 or greater than CPU_ALIGNMENT. - */ - -#define CPU_STACK_ALIGNMENT CPU_ALIGNMENT - -/* ISR handler macros */ - -/* - * Disable all interrupts for an RTEMS critical section. The previous - * level is returned in _level. - */ - -#define _CPU_ISR_Disable( _int_level ) \ - do{ \ - _int_level = mips_disable_interrupts(); \ - }while(0) - -/* - * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). - * This indicates the end of an RTEMS critical section. The parameter - * _level is not modified. - */ - -#define _CPU_ISR_Enable( _level ) \ - do{ \ - mips_enable_interrupts(_level); \ - }while(0) - -/* - * This temporarily restores the interrupt to _level before immediately - * disabling them again. This is used to divide long RTEMS critical - * sections into two or more parts. The parameter _level is not - * modified. - */ - -#define _CPU_ISR_Flash( _xlevel ) \ - do{ \ - int _scratch; \ - _CPU_ISR_Enable( _xlevel ); \ - _CPU_ISR_Disable( _scratch ); \ - }while(0) - -/* - * Map interrupt level in task mode onto the hardware that the CPU - * actually provides. Currently, interrupt levels which do not - * map onto the CPU in a generic fashion are undefined. Someday, - * it would be nice if these were "mapped" by the application - * via a callout. For example, m68k has 8 levels 0 - 7, levels - * 8 - 255 would be available for bsp/application specific meaning. - * This could be used to manage a programmable interrupt controller - * via the rtems_task_mode directive. - */ -extern void _CPU_ISR_Set_level( unsigned32 _new_level ); - -unsigned32 _CPU_ISR_Get_level( void ); - -/* end of ISR handler macros */ - -/* Context handler macros */ - -/* - * Initialize the context to a state suitable for starting a - * task after a context restore operation. Generally, this - * involves: - * - * - setting a starting address - * - preparing the stack - * - preparing the stack and frame pointers - * - setting the proper interrupt level in the context - * - initializing the floating point context - * - * This routine generally does not set any unnecessary register - * in the context. The state of the "general data" registers is - * undefined at task start time. - * - * NOTE: This is_fp parameter is TRUE if the thread is to be a floating - * point thread. This is typically only used on CPUs where the - * FPU may be easily disabled by software such as on the SPARC - * where the PSR contains an enable FPU bit. - */ - -#define _CPU_Context_Initialize( _the_context, _stack_base, _size, \ - _isr, _entry_point, _is_fp ) \ - { \ - unsigned32 _stack_tmp = (unsigned32)(_stack_base) + (_size) - CPU_STACK_ALIGNMENT; \ - _stack_tmp &= ~(CPU_STACK_ALIGNMENT - 1); \ - (_the_context)->sp = _stack_tmp; \ - (_the_context)->fp = _stack_tmp; \ - (_the_context)->ra = (unsigned64)_entry_point; \ - (_the_context)->c0_sr = 0; \ - } - -/* - * This routine is responsible for somehow restarting the currently - * executing task. If you are lucky, then all that is necessary - * is restoring the context. Otherwise, there will need to be - * a special assembly routine which does something special in this - * case. Context_Restore should work most of the time. It will - * not work if restarting self conflicts with the stack frame - * assumptions of restoring a context. - */ - -#define _CPU_Context_Restart_self( _the_context ) \ - _CPU_Context_restore( (_the_context) ); - -/* - * The purpose of this macro is to allow the initial pointer into - * A floating point context area (used to save the floating point - * context) to be at an arbitrary place in the floating point - * context area. - * - * This is necessary because some FP units are designed to have - * their context saved as a stack which grows into lower addresses. - * Other FP units can be saved by simply moving registers into offsets - * from the base of the context area. Finally some FP units provide - * a "dump context" instruction which could fill in from high to low - * or low to high based on the whim of the CPU designers. - */ - -#define _CPU_Context_Fp_start( _base, _offset ) \ - ( (void *) _Addresses_Add_offset( (_base), (_offset) ) ) - -/* - * This routine initializes the FP context area passed to it to. - * There are a few standard ways in which to initialize the - * floating point context. The code included for this macro assumes - * that this is a CPU in which a "initial" FP context was saved into - * _CPU_Null_fp_context and it simply copies it to the destination - * context passed to it. - * - * Other models include (1) not doing anything, and (2) putting - * a "null FP status word" in the correct place in the FP context. - */ - -#define _CPU_Context_Initialize_fp( _destination ) \ - { \ - *((Context_Control_fp *) *((void **) _destination)) = _CPU_Null_fp_context; \ - } - -/* end of Context handler macros */ - -/* Fatal Error manager macros */ - -/* - * This routine copies _error into a known place -- typically a stack - * location or a register, optionally disables interrupts, and - * halts/stops the CPU. - */ - -#define _CPU_Fatal_halt( _error ) \ - { \ - mips_disable_global_interrupts(); \ - mips_fatal_error(_error); \ - } - -/* end of Fatal Error manager macros */ - -/* Bitfield handler macros */ - -/* - * This routine sets _output to the bit number of the first bit - * set in _value. _value is of CPU dependent type Priority_Bit_map_control. - * This type may be either 16 or 32 bits wide although only the 16 - * least significant bits will be used. - * - * There are a number of variables in using a "find first bit" type - * instruction. - * - * (1) What happens when run on a value of zero? - * (2) Bits may be numbered from MSB to LSB or vice-versa. - * (3) The numbering may be zero or one based. - * (4) The "find first bit" instruction may search from MSB or LSB. - * - * RTEMS guarantees that (1) will never happen so it is not a concern. - * (2),(3), (4) are handled by the macros _CPU_Priority_mask() and - * _CPU_Priority_bits_index(). These three form a set of routines - * which must logically operate together. Bits in the _value are - * set and cleared based on masks built by _CPU_Priority_mask(). - * The basic major and minor values calculated by _Priority_Major() - * and _Priority_Minor() are "massaged" by _CPU_Priority_bits_index() - * to properly range between the values returned by the "find first bit" - * instruction. This makes it possible for _Priority_Get_highest() to - * calculate the major and directly index into the minor table. - * This mapping is necessary to ensure that 0 (a high priority major/minor) - * is the first bit found. - * - * This entire "find first bit" and mapping process depends heavily - * on the manner in which a priority is broken into a major and minor - * components with the major being the 4 MSB of a priority and minor - * the 4 LSB. Thus (0 << 4) + 0 corresponds to priority 0 -- the highest - * priority. And (15 << 4) + 14 corresponds to priority 254 -- the next - * to the lowest priority. - * - * If your CPU does not have a "find first bit" instruction, then - * there are ways to make do without it. Here are a handful of ways - * to implement this in software: - * - * - a series of 16 bit test instructions - * - a "binary search using if's" - * - _number = 0 - * if _value > 0x00ff - * _value >>=8 - * _number = 8; - * - * if _value > 0x0000f - * _value >=8 - * _number += 4 - * - * _number += bit_set_table[ _value ] - * - * where bit_set_table[ 16 ] has values which indicate the first - * bit set - */ - -#define CPU_USE_GENERIC_BITFIELD_CODE TRUE -#define CPU_USE_GENERIC_BITFIELD_DATA TRUE - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - { \ - (_output) = 0; /* do something to prevent warnings */ \ - } - -#endif - -/* end of Bitfield handler macros */ - -/* - * This routine builds the mask which corresponds to the bit fields - * as searched by _CPU_Bitfield_Find_first_bit(). See the discussion - * for that routine. - */ - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Priority_Mask( _bit_number ) \ - ( 1 << (_bit_number) ) - -#endif - -/* - * This routine translates the bit numbers returned by - * _CPU_Bitfield_Find_first_bit() into something suitable for use as - * a major or minor component of a priority. See the discussion - * for that routine. - */ - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Priority_bits_index( _priority ) \ - (_priority) - -#endif - -/* end of Priority handler macros */ - -/* functions */ - -/* - * _CPU_Initialize - * - * This routine performs CPU dependent initialization. - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) -); - -/* - * _CPU_ISR_install_raw_handler - * - * This routine installs a "raw" interrupt handler directly into the - * processor's vector table. - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_ISR_install_vector - * - * This routine installs an interrupt vector. - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_Install_interrupt_stack - * - * This routine installs the hardware interrupt stack pointer. - * - * NOTE: It need only be provided if CPU_HAS_HARDWARE_INTERRUPT_STACK - * is TRUE. - */ - -void _CPU_Install_interrupt_stack( void ); - -/* - * _CPU_Internal_threads_Idle_thread_body - * - * This routine is the CPU dependent IDLE thread body. - * - * NOTE: It need only be provided if CPU_PROVIDES_IDLE_THREAD_BODY - * is TRUE. - */ - -void _CPU_Thread_Idle_body( void ); - -/* - * _CPU_Context_switch - * - * This routine switches from the run context to the heir context. - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/* - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner. It may simply be a label in _CPU_Context_switch. - * - * NOTE: May be unnecessary to reload some registers. - */ - -void _CPU_Context_restore( - Context_Control *new_context -); - -/* - * _CPU_Context_save_fp - * - * This routine saves the floating point context passed to it. - */ - -void _CPU_Context_save_fp( - void **fp_context_ptr -); - -/* - * _CPU_Context_restore_fp - * - * This routine restores the floating point context passed to it. - */ - -void _CPU_Context_restore_fp( - void **fp_context_ptr -); - -/* The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. - * - * This version will work on any processor, but if there is a better - * way for your CPU PLEASE use it. The most common way to do this is to: - * - * swap least significant two bytes with 16-bit rotate - * swap upper and lower 16-bits - * swap most significant two bytes with 16-bit rotate - * - * Some CPUs have special instructions which swap a 32-bit quantity in - * a single instruction (e.g. i486). It is probably best to avoid - * an "endian swapping control bit" in the CPU. One good reason is - * that interrupts would probably have to be disabled to insure that - * an interrupt does not try to access the same "chunk" with the wrong - * endian. Another good reason is that on some CPUs, the endian bit - * endianness for ALL fetches -- both code and data -- so the code - * will be fetched incorrectly. - */ - -static inline unsigned int CPU_swap_u32( - unsigned int value -) -{ - unsigned32 byte1, byte2, byte3, byte4, swapped; - - byte4 = (value >> 24) & 0xff; - byte3 = (value >> 16) & 0xff; - byte2 = (value >> 8) & 0xff; - byte1 = value & 0xff; - - swapped = (byte1 << 24) | (byte2 << 16) | (byte3 << 8) | byte4; - return( swapped ); -} - -#define CPU_swap_u16( value ) \ - (((value&0xff) << 8) | ((value >> 8)&0xff)) - -/* - * Miscellaneous prototypes - * - * NOTE: The names should have mips64orion in them. - */ - -void disable_int( unsigned32 mask ); -void enable_int( unsigned32 mask ); - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/c/src/exec/score/cpu/mips64orion/cpu_asm.S b/c/src/exec/score/cpu/mips64orion/cpu_asm.S deleted file mode 100644 index 7dcb8fbda7..0000000000 --- a/c/src/exec/score/cpu/mips64orion/cpu_asm.S +++ /dev/null @@ -1,972 +0,0 @@ -/* cpu_asm.S - * - * This file contains the basic algorithms for all assembly code used - * in an specific CPU port of RTEMS. These algorithms must be implemented - * in assembly language - * - * Author: Craig Lebakken <craigl@transition.com> - * - * COPYRIGHT (c) 1996 by Transition Networks Inc. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of Transition Networks not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * Transition Networks makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/score/cpu/no_cpu/cpu_asm.s: - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ -/* @(#)cpu_asm.S 08/20/96 1.15 */ - -#include "cpu_asm.h" - -#include "iregdef.h" -#include "idtcpu.h" - -#define FRAME(name,frm_reg,offset,ret_reg) \ - .globl name; \ - .ent name; \ -name:; \ - .frame frm_reg,offset,ret_reg -#define ENDFRAME(name) \ - .end name - - -#define EXCP_STACK_SIZE (NREGS*R_SZ) - -#if __ghs__ -#define sd sw -#define ld lw -#define dmtc0 mtc0 -#define dsll sll -#define dmfc0 mfc0 -#endif - -#if 1 /* 32 bit unsigned32 types */ -#define sint sw -#define lint lw -#define stackadd addiu -#define intadd addu -#define SZ_INT 4 -#define SZ_INT_POW2 2 -#else /* 64 bit unsigned32 types */ -#define sint dw -#define lint dw -#define stackadd daddiu -#define intadd daddu -#define SZ_INT 8 -#define SZ_INT_POW2 3 -#endif - -#ifdef __GNUC__ -#define EXTERN(x,size) .extern x,size -#else -#define EXTERN(x,size) -#endif - -/* NOTE: these constants must match the Context_Control structure in cpu.h */ -#define S0_OFFSET 0 -#define S1_OFFSET 1 -#define S2_OFFSET 2 -#define S3_OFFSET 3 -#define S4_OFFSET 4 -#define S5_OFFSET 5 -#define S6_OFFSET 6 -#define S7_OFFSET 7 -#define SP_OFFSET 8 -#define FP_OFFSET 9 -#define RA_OFFSET 10 -#define C0_SR_OFFSET 11 -#define C0_EPC_OFFSET 12 - -/* NOTE: these constants must match the Context_Control_fp structure in cpu.h */ -#define FP0_OFFSET 0 -#define FP1_OFFSET 1 -#define FP2_OFFSET 2 -#define FP3_OFFSET 3 -#define FP4_OFFSET 4 -#define FP5_OFFSET 5 -#define FP6_OFFSET 6 -#define FP7_OFFSET 7 -#define FP8_OFFSET 8 -#define FP9_OFFSET 9 -#define FP10_OFFSET 10 -#define FP11_OFFSET 11 -#define FP12_OFFSET 12 -#define FP13_OFFSET 13 -#define FP14_OFFSET 14 -#define FP15_OFFSET 15 -#define FP16_OFFSET 16 -#define FP17_OFFSET 17 -#define FP18_OFFSET 18 -#define FP19_OFFSET 19 -#define FP20_OFFSET 20 -#define FP21_OFFSET 21 -#define FP22_OFFSET 22 -#define FP23_OFFSET 23 -#define FP24_OFFSET 24 -#define FP25_OFFSET 25 -#define FP26_OFFSET 26 -#define FP27_OFFSET 27 -#define FP28_OFFSET 28 -#define FP29_OFFSET 29 -#define FP30_OFFSET 30 -#define FP31_OFFSET 31 - - -/*PAGE - * - * _CPU_ISR_Get_level - */ - -#if 0 -unsigned32 _CPU_ISR_Get_level( void ) -{ - /* - * This routine returns the current interrupt level. - */ -} -#endif -/* return the current exception level for the 4650 */ -FRAME(_CPU_ISR_Get_level,sp,0,ra) - mfc0 v0,C0_SR - nop - andi v0,SR_EXL - srl v0,1 - j ra -ENDFRAME(_CPU_ISR_Get_level) - -FRAME(_CPU_ISR_Set_level,sp,0,ra) - nop - mfc0 a0,C0_SR - nop - andi a0,SR_EXL - beqz a0,_CPU_ISR_Set_1 /* normalize a0 */ - nop - li a0,1 -_CPU_ISR_Set_1: - beq v0,a0,_CPU_ISR_Set_exit /* if (current_level != new_level ) */ - nop - bnez a0,_CPU_ISR_Set_2 - nop - nop - mfc0 t0,C0_SR - nop - li t1,~SR_EXL - and t0,t1 - nop - mtc0 t0,C0_SR /* disable exception level */ - nop - j ra - nop -_CPU_ISR_Set_2: - nop - mfc0 t0,C0_SR - nop - li t1,~SR_IE - and t0,t1 - nop - mtc0 t0,C0_SR /* first disable ie bit (recommended) */ - nop - ori t0,SR_EXL|SR_IE /* enable exception level */ - nop - mtc0 t0,C0_SR - nop -_CPU_ISR_Set_exit: - j ra - nop -ENDFRAME(_CPU_ISR_Set_level) - -/* - * _CPU_Context_save_fp_context - * - * This routine is responsible for saving the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * Sometimes a macro implementation of this is in cpu.h which dereferences - * the ** and a similarly named routine in this file is passed something - * like a (Context_Control_fp *). The general rule on making this decision - * is to avoid writing assembly language. - */ - -/* void _CPU_Context_save_fp( - * void **fp_context_ptr - * ) - * { - * } - */ - -FRAME(_CPU_Context_save_fp,sp,0,ra) - .set noat - ld a1,(a0) - swc1 $f0,FP0_OFFSET*4(a1) - swc1 $f1,FP1_OFFSET*4(a1) - swc1 $f2,FP2_OFFSET*4(a1) - swc1 $f3,FP3_OFFSET*4(a1) - swc1 $f4,FP4_OFFSET*4(a1) - swc1 $f5,FP5_OFFSET*4(a1) - swc1 $f6,FP6_OFFSET*4(a1) - swc1 $f7,FP7_OFFSET*4(a1) - swc1 $f8,FP8_OFFSET*4(a1) - swc1 $f9,FP9_OFFSET*4(a1) - swc1 $f10,FP10_OFFSET*4(a1) - swc1 $f11,FP11_OFFSET*4(a1) - swc1 $f12,FP12_OFFSET*4(a1) - swc1 $f13,FP13_OFFSET*4(a1) - swc1 $f14,FP14_OFFSET*4(a1) - swc1 $f15,FP15_OFFSET*4(a1) - swc1 $f16,FP16_OFFSET*4(a1) - swc1 $f17,FP17_OFFSET*4(a1) - swc1 $f18,FP18_OFFSET*4(a1) - swc1 $f19,FP19_OFFSET*4(a1) - swc1 $f20,FP20_OFFSET*4(a1) - swc1 $f21,FP21_OFFSET*4(a1) - swc1 $f22,FP22_OFFSET*4(a1) - swc1 $f23,FP23_OFFSET*4(a1) - swc1 $f24,FP24_OFFSET*4(a1) - swc1 $f25,FP25_OFFSET*4(a1) - swc1 $f26,FP26_OFFSET*4(a1) - swc1 $f27,FP27_OFFSET*4(a1) - swc1 $f28,FP28_OFFSET*4(a1) - swc1 $f29,FP29_OFFSET*4(a1) - swc1 $f30,FP30_OFFSET*4(a1) - swc1 $f31,FP31_OFFSET*4(a1) - j ra - nop - .set at -ENDFRAME(_CPU_Context_save_fp) - -/* - * _CPU_Context_restore_fp_context - * - * This routine is responsible for restoring the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * Sometimes a macro implementation of this is in cpu.h which dereferences - * the ** and a similarly named routine in this file is passed something - * like a (Context_Control_fp *). The general rule on making this decision - * is to avoid writing assembly language. - */ - -/* void _CPU_Context_restore_fp( - * void **fp_context_ptr - * ) - * { - * } - */ - -FRAME(_CPU_Context_restore_fp,sp,0,ra) - .set noat - ld a1,(a0) - lwc1 $f0,FP0_OFFSET*4(a1) - lwc1 $f1,FP1_OFFSET*4(a1) - lwc1 $f2,FP2_OFFSET*4(a1) - lwc1 $f3,FP3_OFFSET*4(a1) - lwc1 $f4,FP4_OFFSET*4(a1) - lwc1 $f5,FP5_OFFSET*4(a1) - lwc1 $f6,FP6_OFFSET*4(a1) - lwc1 $f7,FP7_OFFSET*4(a1) - lwc1 $f8,FP8_OFFSET*4(a1) - lwc1 $f9,FP9_OFFSET*4(a1) - lwc1 $f10,FP10_OFFSET*4(a1) - lwc1 $f11,FP11_OFFSET*4(a1) - lwc1 $f12,FP12_OFFSET*4(a1) - lwc1 $f13,FP13_OFFSET*4(a1) - lwc1 $f14,FP14_OFFSET*4(a1) - lwc1 $f15,FP15_OFFSET*4(a1) - lwc1 $f16,FP16_OFFSET*4(a1) - lwc1 $f17,FP17_OFFSET*4(a1) - lwc1 $f18,FP18_OFFSET*4(a1) - lwc1 $f19,FP19_OFFSET*4(a1) - lwc1 $f20,FP20_OFFSET*4(a1) - lwc1 $f21,FP21_OFFSET*4(a1) - lwc1 $f22,FP22_OFFSET*4(a1) - lwc1 $f23,FP23_OFFSET*4(a1) - lwc1 $f24,FP24_OFFSET*4(a1) - lwc1 $f25,FP25_OFFSET*4(a1) - lwc1 $f26,FP26_OFFSET*4(a1) - lwc1 $f27,FP27_OFFSET*4(a1) - lwc1 $f28,FP28_OFFSET*4(a1) - lwc1 $f29,FP29_OFFSET*4(a1) - lwc1 $f30,FP30_OFFSET*4(a1) - lwc1 $f31,FP31_OFFSET*4(a1) - j ra - nop - .set at -ENDFRAME(_CPU_Context_restore_fp) - -/* _CPU_Context_switch - * - * This routine performs a normal non-FP context switch. - */ - -/* void _CPU_Context_switch( - * Context_Control *run, - * Context_Control *heir - * ) - * { - * } - */ - -FRAME(_CPU_Context_switch,sp,0,ra) - - mfc0 t0,C0_SR - li t1,~SR_IE - sd t0,C0_SR_OFFSET*8(a0) /* save status register */ - and t0,t1 - mtc0 t0,C0_SR /* first disable ie bit (recommended) */ - ori t0,SR_EXL|SR_IE /* enable exception level to disable interrupts */ - mtc0 t0,C0_SR - - sd ra,RA_OFFSET*8(a0) /* save current context */ - sd sp,SP_OFFSET*8(a0) - sd fp,FP_OFFSET*8(a0) - sd s0,S0_OFFSET*8(a0) - sd s1,S1_OFFSET*8(a0) - sd s2,S2_OFFSET*8(a0) - sd s3,S3_OFFSET*8(a0) - sd s4,S4_OFFSET*8(a0) - sd s5,S5_OFFSET*8(a0) - sd s6,S6_OFFSET*8(a0) - sd s7,S7_OFFSET*8(a0) - dmfc0 t0,C0_EPC - sd t0,C0_EPC_OFFSET*8(a0) - -_CPU_Context_switch_restore: - ld s0,S0_OFFSET*8(a1) /* restore context */ - ld s1,S1_OFFSET*8(a1) - ld s2,S2_OFFSET*8(a1) - ld s3,S3_OFFSET*8(a1) - ld s4,S4_OFFSET*8(a1) - ld s5,S5_OFFSET*8(a1) - ld s6,S6_OFFSET*8(a1) - ld s7,S7_OFFSET*8(a1) - ld fp,FP_OFFSET*8(a1) - ld sp,SP_OFFSET*8(a1) - ld ra,RA_OFFSET*8(a1) - ld t0,C0_EPC_OFFSET*8(a1) - dmtc0 t0,C0_EPC - ld t0,C0_SR_OFFSET*8(a1) - andi t0,SR_EXL - bnez t0,_CPU_Context_1 /* set exception level from restore context */ - li t0,~SR_EXL - mfc0 t1,C0_SR - nop - and t1,t0 - mtc0 t1,C0_SR -_CPU_Context_1: - j ra - nop -ENDFRAME(_CPU_Context_switch) - -/* - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner. It may simply be a label in _CPU_Context_switch. - * - * NOTE: May be unnecessary to reload some registers. - */ - -#if 0 -void _CPU_Context_restore( - Context_Control *new_context -) -{ -} -#endif - -FRAME(_CPU_Context_restore,sp,0,ra) - dadd a1,a0,zero - j _CPU_Context_switch_restore - nop -ENDFRAME(_CPU_Context_restore) - -EXTERN(_ISR_Nest_level, SZ_INT) -EXTERN(_Thread_Dispatch_disable_level,SZ_INT) -EXTERN(_Context_Switch_necessary,SZ_INT) -EXTERN(_ISR_Signals_to_thread_executing,SZ_INT) -.extern _Thread_Dispatch -.extern _ISR_Vector_table - -/* void __ISR_Handler() - * - * This routine provides the RTEMS interrupt management. - * - */ - -#if 0 -void _ISR_Handler() -{ - /* - * This discussion ignores a lot of the ugly details in a real - * implementation such as saving enough registers/state to be - * able to do something real. Keep in mind that the goal is - * to invoke a user's ISR handler which is written in C and - * uses a certain set of registers. - * - * Also note that the exact order is to a large extent flexible. - * Hardware will dictate a sequence for a certain subset of - * _ISR_Handler while requirements for setting - */ - - /* - * At entry to "common" _ISR_Handler, the vector number must be - * available. On some CPUs the hardware puts either the vector - * number or the offset into the vector table for this ISR in a - * known place. If the hardware does not give us this information, - * then the assembly portion of RTEMS for this port will contain - * a set of distinct interrupt entry points which somehow place - * the vector number in a known place (which is safe if another - * interrupt nests this one) and branches to _ISR_Handler. - * - */ -#endif -FRAME(_ISR_Handler,sp,0,ra) -.set noreorder -#if USE_IDTKIT -/* IDT/Kit incorrectly adds 4 to EPC before returning. This compensates */ - lreg k0, R_EPC*R_SZ(sp) - daddiu k0,k0,-4 - sreg k0, R_EPC*R_SZ(sp) - lreg k0, R_CAUSE*R_SZ(sp) - li k1, ~CAUSE_BD - and k0, k1 - sreg k0, R_CAUSE*R_SZ(sp) -#endif - -/* save registers not already saved by IDT/sim */ - stackadd sp,sp,-EXCP_STACK_SIZE /* store ra on the stack */ - - sreg ra, R_RA*R_SZ(sp) - sreg v0, R_V0*R_SZ(sp) - sreg v1, R_V1*R_SZ(sp) - sreg a0, R_A0*R_SZ(sp) - sreg a1, R_A1*R_SZ(sp) - sreg a2, R_A2*R_SZ(sp) - sreg a3, R_A3*R_SZ(sp) - sreg t0, R_T0*R_SZ(sp) - sreg t1, R_T1*R_SZ(sp) - sreg t2, R_T2*R_SZ(sp) - sreg t3, R_T3*R_SZ(sp) - sreg t4, R_T4*R_SZ(sp) - sreg t5, R_T5*R_SZ(sp) - sreg t6, R_T6*R_SZ(sp) - sreg t7, R_T7*R_SZ(sp) - mflo k0 - sreg t8, R_T8*R_SZ(sp) - sreg k0, R_MDLO*R_SZ(sp) - sreg t9, R_T9*R_SZ(sp) - mfhi k0 - sreg gp, R_GP*R_SZ(sp) - sreg fp, R_FP*R_SZ(sp) - sreg k0, R_MDHI*R_SZ(sp) - .set noat - sreg AT, R_AT*R_SZ(sp) - .set at - - stackadd sp,sp,-40 /* store ra on the stack */ - sd ra,32(sp) - -/* determine if an interrupt generated this exception */ - mfc0 k0,C0_CAUSE - and k1,k0,CAUSE_EXCMASK - bnez k1,_ISR_Handler_prom_exit /* not an external interrupt, pass exception to Monitor */ - mfc0 k1,C0_SR - and k0,k1 - and k0,CAUSE_IPMASK - beq k0,zero,_ISR_Handler_quick_exit /* external interrupt not enabled, ignore */ - nop - - /* - * save some or all context on stack - * may need to save some special interrupt information for exit - * - * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) - * if ( _ISR_Nest_level == 0 ) - * switch to software interrupt stack - * #endif - */ -#if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) - lint t0,_ISR_Nest_level - beq t0, zero, _ISR_Handler_1 - nop - /* switch stacks */ -_ISR_Handler_1: -#else - lint t0,_ISR_Nest_level -#endif - /* - * _ISR_Nest_level++; - */ - addi t0,t0,1 - sint t0,_ISR_Nest_level - /* - * _Thread_Dispatch_disable_level++; - */ - lint t1,_Thread_Dispatch_disable_level - addi t1,t1,1 - sint t1,_Thread_Dispatch_disable_level -#if 0 - nop - j _ISR_Handler_4 - nop - /* - * while ( interrupts_pending(cause_reg) ) { - * vector = BITFIELD_TO_INDEX(cause_reg); - * (*_ISR_Vector_table[ vector ])( vector ); - * } - */ -_ISR_Handler_2: -/* software interrupt priorities can be applied here */ - li t1,-1 -/* convert bit field into interrupt index */ -_ISR_Handler_3: - andi t2,t0,1 - addi t1,1 - beql t2,zero,_ISR_Handler_3 - dsrl t0,1 - li t1,7 - dsll t1,3 /* convert index to byte offset (*8) */ - la t3,_ISR_Vector_table - intadd t1,t3 - lint t1,(t1) - jalr t1 - nop - j _ISR_Handler_5 - nop -_ISR_Handler_4: - mfc0 t0,C0_CAUSE - andi t0,CAUSE_IPMASK - bne t0,zero,_ISR_Handler_2 - dsrl t0,t0,8 -_ISR_Handler_5: -#else - nop - li t1,7 - dsll t1,t1,SZ_INT_POW2 - la t3,_ISR_Vector_table - intadd t1,t3 - lint t1,(t1) - jalr t1 - nop -#endif - /* - * --_ISR_Nest_level; - */ - lint t2,_ISR_Nest_level - addi t2,t2,-1 - sint t2,_ISR_Nest_level - /* - * --_Thread_Dispatch_disable_level; - */ - lint t1,_Thread_Dispatch_disable_level - addi t1,t1,-1 - sint t1,_Thread_Dispatch_disable_level - /* - * if ( _Thread_Dispatch_disable_level || _ISR_Nest_level ) - * goto the label "exit interrupt (simple case)" - */ - or t0,t2,t1 - bne t0,zero,_ISR_Handler_exit - nop - /* - * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) - * restore stack - * #endif - * - * if ( !_Context_Switch_necessary && !_ISR_Signals_to_thread_executing ) - * goto the label "exit interrupt (simple case)" - */ - lint t0,_Context_Switch_necessary - lint t1,_ISR_Signals_to_thread_executing - or t0,t0,t1 - beq t0,zero,_ISR_Handler_exit - nop - - /* - * call _Thread_Dispatch() or prepare to return to _ISR_Dispatch - */ - jal _Thread_Dispatch - nop - /* - * prepare to get out of interrupt - * return from interrupt (maybe to _ISR_Dispatch) - * - * LABEL "exit interrupt (simple case): - * prepare to get out of interrupt - * return from interrupt - */ -_ISR_Handler_exit: - ld ra,32(sp) - stackadd sp,sp,40 - -/* restore interrupt context from stack */ - lreg k0, R_MDLO*R_SZ(sp) - mtlo k0 - lreg k0, R_MDHI*R_SZ(sp) - lreg a2, R_A2*R_SZ(sp) - mthi k0 - lreg a3, R_A3*R_SZ(sp) - lreg t0, R_T0*R_SZ(sp) - lreg t1, R_T1*R_SZ(sp) - lreg t2, R_T2*R_SZ(sp) - lreg t3, R_T3*R_SZ(sp) - lreg t4, R_T4*R_SZ(sp) - lreg t5, R_T5*R_SZ(sp) - lreg t6, R_T6*R_SZ(sp) - lreg t7, R_T7*R_SZ(sp) - lreg t8, R_T8*R_SZ(sp) - lreg t9, R_T9*R_SZ(sp) - lreg gp, R_GP*R_SZ(sp) - lreg fp, R_FP*R_SZ(sp) - lreg ra, R_RA*R_SZ(sp) - lreg a0, R_A0*R_SZ(sp) - lreg a1, R_A1*R_SZ(sp) - lreg v1, R_V1*R_SZ(sp) - lreg v0, R_V0*R_SZ(sp) - .set noat - lreg AT, R_AT*R_SZ(sp) - .set at - - stackadd sp,sp,EXCP_STACK_SIZE /* store ra on the stack */ - -#if USE_IDTKIT -/* we handled exception, so return non-zero value */ - li v0,1 -#endif - -_ISR_Handler_quick_exit: -#ifdef USE_IDTKIT - j ra -#else - eret -#endif - nop - -_ISR_Handler_prom_exit: -#ifdef CPU_R3000 - la k0, (R_VEC+((48)*8)) -#endif - -#ifdef CPU_R4000 - la k0, (R_VEC+((112)*8)) /* R4000 Sim's location is different */ -#endif - j k0 - nop - - .set reorder - -ENDFRAME(_ISR_Handler) - - -FRAME(mips_enable_interrupts,sp,0,ra) - mfc0 t0,C0_SR /* get status reg */ - nop - or t0,t0,a0 - mtc0 t0,C0_SR /* save updated status reg */ - j ra - nop -ENDFRAME(mips_enable_interrupts) - -FRAME(mips_disable_interrupts,sp,0,ra) - mfc0 v0,C0_SR /* get status reg */ - li t1,SR_IMASK /* t1 = load interrupt mask word */ - not t0,t1 /* t0 = ~t1 */ - and t0,v0 /* clear imask bits */ - mtc0 t0,C0_SR /* save status reg */ - and v0,t1 /* mask return value (only return imask bits) */ - jr ra - nop -ENDFRAME(mips_disable_interrupts) - -FRAME(mips_enable_global_interrupts,sp,0,ra) - mfc0 t0,C0_SR /* get status reg */ - nop - ori t0,SR_IE - mtc0 t0,C0_SR /* save updated status reg */ - j ra - nop -ENDFRAME(mips_enable_global_interrupts) - -FRAME(mips_disable_global_interrupts,sp,0,ra) - li t1,SR_IE - mfc0 t0,C0_SR /* get status reg */ - not t1 - and t0,t1 - mtc0 t0,C0_SR /* save updated status reg */ - j ra - nop -ENDFRAME(mips_disable_global_interrupts) - -/* return the value of the status register in v0. Used for debugging */ -FRAME(mips_get_sr,sp,0,ra) - mfc0 v0,C0_SR - j ra - nop -ENDFRAME(mips_get_sr) - -FRAME(mips_break,sp,0,ra) -#if 1 - break 0x0 - j mips_break -#else - j ra -#endif - nop -ENDFRAME(mips_break) - -/*PAGE - * - * _CPU_Internal_threads_Idle_thread_body - * - * NOTES: - * - * 1. This is the same as the regular CPU independent algorithm. - * - * 2. If you implement this using a "halt", "idle", or "shutdown" - * instruction, then don't forget to put it in an infinite loop. - * - * 3. Be warned. Some processors with onboard DMA have been known - * to stop the DMA if the CPU were put in IDLE mode. This might - * also be a problem with other on-chip peripherals. So use this - * hook with caution. - */ - -FRAME(_CPU_Thread_Idle_body,sp,0,ra) - wait /* enter low power mode */ - j _CPU_Thread_Idle_body - nop -ENDFRAME(_CPU_Thread_Idle_body) - -#define VEC_CODE_LENGTH 10*4 - -/************************************************************************** -** -** init_exc_vecs() - moves the exception code into the addresses -** reserved for exception vectors -** -** UTLB Miss exception vector at address 0x80000000 -** -** General exception vector at address 0x80000080 -** -** RESET exception vector is at address 0xbfc00000 -** -***************************************************************************/ - -#define INITEXCFRM ((2*4)+4) /* ra + 2 arguments */ -FRAME(init_exc_vecs,sp,0,ra) -/* This code yanked from SIM */ -#if defined(CPU_R3000) - .set noreorder - la t1,exc_utlb_code - la t2,exc_norm_code - li t3,UT_VEC - li t4,E_VEC - li t5,VEC_CODE_LENGTH -1: - lw t6,0(t1) - lw t7,0(t2) - sw t6,0(t3) - sw t7,0(t4) - addiu t1,4 - addiu t3,4 - addiu t4,4 - subu t5,4 - bne t5,zero,1b - addiu t2,4 - move t5,ra # assumes clear_cache doesnt use t5 - li a0,UT_VEC - jal clear_cache - li a1,VEC_CODE_LENGTH - nop - li a0,E_VEC - jal clear_cache - li a1,VEC_CODE_LENGTH - move ra,t5 # restore ra - j ra - nop - .set reorder -#endif -#if defined(CPU_R4000) - .set reorder - move t5,ra # assumes clear_cache doesnt use t5 - - /* TLB exception vector */ - la t1,exc_tlb_code - li t2,T_VEC |K1BASE - li t3,VEC_CODE_LENGTH -1: - lw t6,0(t1) - addiu t1,4 - subu t3,4 - sw t6,0(t2) - addiu t2,4 - bne t3,zero,1b - - li a0,T_VEC - li a1,VEC_CODE_LENGTH - jal clear_cache - - la t1,exc_xtlb_code - li t2,X_VEC |K1BASE - li t3,VEC_CODE_LENGTH -1: - lw t6,0(t1) - addiu t1,4 - subu t3,4 - sw t6,0(t2) - addiu t2,4 - bne t3,zero,1b - - /* extended TLB exception vector */ - li a0,X_VEC - li a1,VEC_CODE_LENGTH - jal clear_cache - - /* cache error exception vector */ - la t1,exc_cache_code - li t2,C_VEC |K1BASE - li t3,VEC_CODE_LENGTH -1: - lw t6,0(t1) - addiu t1,4 - subu t3,4 - sw t6,0(t2) - addiu t2,4 - bne t3,zero,1b - - li a0,C_VEC - li a1,VEC_CODE_LENGTH - jal clear_cache - - /* normal exception vector */ - la t1,exc_norm_code - li t2,E_VEC |K1BASE - li t3,VEC_CODE_LENGTH -1: - lw t6,0(t1) - addiu t1,4 - subu t3,4 - sw t6,0(t2) - addiu t2,4 - bne t3,zero,1b - - li a0,E_VEC - li a1,VEC_CODE_LENGTH - jal clear_cache - - move ra,t5 # restore ra - j ra -#endif -ENDFRAME(init_exc_vecs) - - -#if defined(CPU_R4000) -FRAME(exc_tlb_code,sp,0,ra) -#ifdef CPU_R3000 - la k0, (R_VEC+((48)*8)) -#endif - -#ifdef CPU_R4000 - la k0, (R_VEC+((112)*8)) /* R4000 Sim's location is different */ -#endif - j k0 - nop - -ENDFRAME(exc_tlb_code) - - -FRAME(exc_xtlb_code,sp,0,ra) -#ifdef CPU_R3000 - la k0, (R_VEC+((48)*8)) -#endif - -#ifdef CPU_R4000 - la k0, (R_VEC+((112)*8)) /* R4000 Sim's location is different */ -#endif - j k0 - nop - -ENDFRAME(exc_xtlb_code) - - -FRAME(exc_cache_code,sp,0,ra) -#ifdef CPU_R3000 - la k0, (R_VEC+((48)*8)) -#endif - -#ifdef CPU_R4000 - la k0, (R_VEC+((112)*8)) /* R4000 Sim's location is different */ -#endif - j k0 - nop - -ENDFRAME(exc_cache_code) - - -FRAME(exc_norm_code,sp,0,ra) - la k0, _ISR_Handler /* generic external int hndlr */ - j k0 - nop - subu sp, EXCP_STACK_SIZE /* set up local stack frame */ -ENDFRAME(exc_norm_code) -#endif - -/************************************************************************** -** -** enable_int(mask) - enables interrupts - mask is positioned so it only -** needs to be or'ed into the status reg. This -** also does some other things !!!! caution should -** be used if invoking this while in the middle -** of a debugging session where the client may have -** nested interrupts. -** -****************************************************************************/ -FRAME(enable_int,sp,0,ra) - .set noreorder - mfc0 t0,C0_SR - or a0,1 - or t0,a0 - mtc0 t0,C0_SR - j ra - nop - .set reorder -ENDFRAME(enable_int) - - -/*************************************************************************** -** -** disable_int(mask) - disable the interrupt - mask is the complement -** of the bits to be cleared - i.e. to clear ext int -** 5 the mask would be - 0xffff7fff -** -****************************************************************************/ -FRAME(disable_int,sp,0,ra) - .set noreorder - mfc0 t0,C0_SR - nop - and t0,a0 - mtc0 t0,C0_SR - j ra - nop -ENDFRAME(disable_int) - - diff --git a/c/src/exec/score/cpu/mips64orion/cpu_asm.h b/c/src/exec/score/cpu/mips64orion/cpu_asm.h deleted file mode 100644 index 5d78f39d7c..0000000000 --- a/c/src/exec/score/cpu/mips64orion/cpu_asm.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * cpu_asm.h - * - * Author: Craig Lebakken <craigl@transition.com> - * - * COPYRIGHT (c) 1996 by Transition Networks Inc. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of Transition Networks not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * Transition Networks makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/score/cpu/no_cpu/cpu_asm.h: - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - * - */ -/* @(#)cpu_asm.h 08/20/96 1.2 */ - -#ifndef __CPU_ASM_h -#define __CPU_ASM_h - -/* pull in the generated offsets */ - -/* #include <rtems/score/offsets.h> */ - -/* - * Hardware General Registers - */ - -/* put something here */ - -/* - * Hardware Floating Point Registers - */ - -#define R_FP0 0 -#define R_FP1 1 -#define R_FP2 2 -#define R_FP3 3 -#define R_FP4 4 -#define R_FP5 5 -#define R_FP6 6 -#define R_FP7 7 -#define R_FP8 8 -#define R_FP9 9 -#define R_FP10 10 -#define R_FP11 11 -#define R_FP12 12 -#define R_FP13 13 -#define R_FP14 14 -#define R_FP15 15 -#define R_FP16 16 -#define R_FP17 17 -#define R_FP18 18 -#define R_FP19 19 -#define R_FP20 20 -#define R_FP21 21 -#define R_FP22 22 -#define R_FP23 23 -#define R_FP24 24 -#define R_FP25 25 -#define R_FP26 26 -#define R_FP27 27 -#define R_FP28 28 -#define R_FP29 29 -#define R_FP30 30 -#define R_FP31 31 - -/* - * Hardware Control Registers - */ - -/* put something here */ - -/* - * Calling Convention - */ - -/* put something here */ - -/* - * Temporary registers - */ - -/* put something here */ - -/* - * Floating Point Registers - SW Conventions - */ - -/* put something here */ - -/* - * Temporary floating point registers - */ - -/* put something here */ - -#endif - -/* end of file */ diff --git a/c/src/exec/score/cpu/mips64orion/idtcpu.h b/c/src/exec/score/cpu/mips64orion/idtcpu.h deleted file mode 100644 index f921e85ef6..0000000000 --- a/c/src/exec/score/cpu/mips64orion/idtcpu.h +++ /dev/null @@ -1,440 +0,0 @@ -/* - -Based upon IDT provided code with the following release: - -This source code has been made available to you by IDT on an AS-IS -basis. Anyone receiving this source is licensed under IDT copyrights -to use it in any way he or she deems fit, including copying it, -modifying it, compiling it, and redistributing it either with or -without modifications. No license under IDT patents or patent -applications is to be implied by the copyright license. - -Any user of this software should understand that IDT cannot provide -technical support for this software and will not be responsible for -any consequences resulting from the use of this software. - -Any person who transfers this source code or any derivative work must -include the IDT copyright notice, this paragraph, and the preceeding -two paragraphs in the transferred software. - -COPYRIGHT IDT CORPORATION 1996 -LICENSED MATERIAL - PROGRAM PROPERTY OF IDT - - $Id$ -*/ - -/* -** idtcpu.h -- cpu related defines -*/ - -#ifndef _IDTCPU_H__ -#define _IDTCPU_H__ - -/* - * 950313: Ketan added Register definition for XContext reg. - * added define for WAIT instruction. - * 950421: Ketan added Register definition for Config reg (R3081) - */ - -/* -** memory configuration and mapping -*/ -#define K0BASE 0x80000000 -#define K0SIZE 0x20000000 -#define K1BASE 0xa0000000 -#define K1SIZE 0x20000000 -#define K2BASE 0xc0000000 -#define K2SIZE 0x20000000 -#if defined(CPU_R4000) -#define KSBASE 0xe0000000 -#define KSSIZE 0x20000000 -#endif - -#define KUBASE 0 -#define KUSIZE 0x80000000 - -/* -** Exception Vectors -*/ -#if defined(CPU_R3000) -#define UT_VEC K0BASE /* utlbmiss vector */ -#define E_VEC (K0BASE+0x80) /* exception vevtor */ -#endif -#if defined(CPU_R4000) -#define T_VEC (K0BASE+0x000) /* tlbmiss vector */ -#define X_VEC (K0BASE+0x080) /* xtlbmiss vector */ -#define C_VEC (K0BASE+0x100) /* cache error vector */ -#define E_VEC (K0BASE+0x180) /* exception vector */ -#endif -#define R_VEC (K1BASE+0x1fc00000) /* reset vector */ - -/* -** Address conversion macros -*/ -#ifdef CLANGUAGE -#define CAST(as) (as) -#else -#define CAST(as) -#endif -#define K0_TO_K1(x) (CAST(unsigned)(x)|0xA0000000) /* kseg0 to kseg1 */ -#define K1_TO_K0(x) (CAST(unsigned)(x)&0x9FFFFFFF) /* kseg1 to kseg0 */ -#define K0_TO_PHYS(x) (CAST(unsigned)(x)&0x1FFFFFFF) /* kseg0 to physical */ -#define K1_TO_PHYS(x) (CAST(unsigned)(x)&0x1FFFFFFF) /* kseg1 to physical */ -#define PHYS_TO_K0(x) (CAST(unsigned)(x)|0x80000000) /* physical to kseg0 */ -#define PHYS_TO_K1(x) (CAST(unsigned)(x)|0xA0000000) /* physical to kseg1 */ - -/* -** Cache size constants -*/ -#define MINCACHE 0x200 /* 512 For 3041. */ -#define MAXCACHE 0x40000 /* 256*1024 256k */ - -#if defined(CPU_R4000) -/* R4000 configuration register definitions */ -#define CFG_CM 0x80000000 /* Master-Checker mode */ -#define CFG_ECMASK 0x70000000 /* System Clock Ratio */ -#define CFG_ECBY2 0x00000000 /* divide by 2 */ -#define CFG_ECBY3 0x10000000 /* divide by 3 */ -#define CFG_ECBY4 0x20000000 /* divide by 4 */ -#define CFG_EPMASK 0x0f000000 /* Transmit data pattern */ -#define CFG_EPD 0x00000000 /* D */ -#define CFG_EPDDX 0x01000000 /* DDX */ -#define CFG_EPDDXX 0x02000000 /* DDXX */ -#define CFG_EPDXDX 0x03000000 /* DXDX */ -#define CFG_EPDDXXX 0x04000000 /* DDXXX */ -#define CFG_EPDDXXXX 0x05000000 /* DDXXXX */ -#define CFG_EPDXXDXX 0x06000000 /* DXXDXX */ -#define CFG_EPDDXXXXX 0x07000000 /* DDXXXXX */ -#define CFG_EPDXXXDXXX 0x08000000 /* DXXXDXXX */ -#define CFG_SBMASK 0x00c00000 /* Secondary cache block size */ -#define CFG_SBSHIFT 22 -#define CFG_SB4 0x00000000 /* 4 words */ -#define CFG_SB8 0x00400000 /* 8 words */ -#define CFG_SB16 0x00800000 /* 16 words */ -#define CFG_SB32 0x00c00000 /* 32 words */ -#define CFG_SS 0x00200000 /* Split secondary cache */ -#define CFG_SW 0x00100000 /* Secondary cache port width */ -#define CFG_EWMASK 0x000c0000 /* System port width */ -#define CFG_EWSHIFT 18 -#define CFG_EW64 0x00000000 /* 64 bit */ -#define CFG_EW32 0x00010000 /* 32 bit */ -#define CFG_SC 0x00020000 /* Secondary cache absent */ -#define CFG_SM 0x00010000 /* Dirty Shared mode disabled */ -#define CFG_BE 0x00008000 /* Big Endian */ -#define CFG_EM 0x00004000 /* ECC mode enable */ -#define CFG_EB 0x00002000 /* Block ordering */ -#define CFG_ICMASK 0x00000e00 /* Instruction cache size */ -#define CFG_ICSHIFT 9 -#define CFG_DCMASK 0x000001c0 /* Data cache size */ -#define CFG_DCSHIFT 6 -#define CFG_IB 0x00000020 /* Instruction cache block size */ -#define CFG_DB 0x00000010 /* Data cache block size */ -#define CFG_CU 0x00000008 /* Update on Store Conditional */ -#define CFG_K0MASK 0x00000007 /* KSEG0 coherency algorithm */ - -/* - * R4000 primary cache mode - */ -#define CFG_C_UNCACHED 2 -#define CFG_C_NONCOHERENT 3 -#define CFG_C_COHERENTXCL 4 -#define CFG_C_COHERENTXCLW 5 -#define CFG_C_COHERENTUPD 6 - -/* - * R4000 cache operations (should be in assembler...?) - */ -#define Index_Invalidate_I 0x0 /* 0 0 */ -#define Index_Writeback_Inv_D 0x1 /* 0 1 */ -#define Index_Invalidate_SI 0x2 /* 0 2 */ -#define Index_Writeback_Inv_SD 0x3 /* 0 3 */ -#define Index_Load_Tag_I 0x4 /* 1 0 */ -#define Index_Load_Tag_D 0x5 /* 1 1 */ -#define Index_Load_Tag_SI 0x6 /* 1 2 */ -#define Index_Load_Tag_SD 0x7 /* 1 3 */ -#define Index_Store_Tag_I 0x8 /* 2 0 */ -#define Index_Store_Tag_D 0x9 /* 2 1 */ -#define Index_Store_Tag_SI 0xA /* 2 2 */ -#define Index_Store_Tag_SD 0xB /* 2 3 */ -#define Create_Dirty_Exc_D 0xD /* 3 1 */ -#define Create_Dirty_Exc_SD 0xF /* 3 3 */ -#define Hit_Invalidate_I 0x10 /* 4 0 */ -#define Hit_Invalidate_D 0x11 /* 4 1 */ -#define Hit_Invalidate_SI 0x12 /* 4 2 */ -#define Hit_Invalidate_SD 0x13 /* 4 3 */ -#define Hit_Writeback_Inv_D 0x15 /* 5 1 */ -#define Hit_Writeback_Inv_SD 0x17 /* 5 3 */ -#define Fill_I 0x14 /* 5 0 */ -#define Hit_Writeback_D 0x19 /* 6 1 */ -#define Hit_Writeback_SD 0x1B /* 6 3 */ -#define Hit_Writeback_I 0x18 /* 6 0 */ -#define Hit_Set_Virtual_SI 0x1E /* 7 2 */ -#define Hit_Set_Virtual_SD 0x1F /* 7 3 */ - -#ifndef WAIT -#define WAIT .word 0x42000020 -#endif WAIT - -#ifndef wait -#define wait .word 0x42000020 -#endif wait - -#endif - -/* -** TLB resource defines -*/ -#if defined(CPU_R3000) -#define N_TLB_ENTRIES 64 -#define TLB_PGSIZE 0x1000 -#define RANDBASE 8 -#define TLBLO_PFNMASK 0xfffff000 -#define TLBLO_PFNSHIFT 12 -#define TLBLO_N 0x800 /* non-cacheable */ -#define TLBLO_D 0x400 /* writeable */ -#define TLBLO_V 0x200 /* valid bit */ -#define TLBLO_G 0x100 /* global access bit */ - -#define TLBHI_VPNMASK 0xfffff000 -#define TLBHI_VPNSHIFT 12 -#define TLBHI_PIDMASK 0xfc0 -#define TLBHI_PIDSHIFT 6 -#define TLBHI_NPID 64 - -#define TLBINX_PROBE 0x80000000 -#define TLBINX_INXMASK 0x00003f00 -#define TLBINX_INXSHIFT 8 - -#define TLBRAND_RANDMASK 0x00003f00 -#define TLBRAND_RANDSHIFT 8 - -#define TLBCTXT_BASEMASK 0xffe00000 -#define TLBCTXT_BASESHIFT 21 - -#define TLBCTXT_VPNMASK 0x001ffffc -#define TLBCTXT_VPNSHIFT 2 -#endif -#if defined(CPU_R4000) -#define N_TLB_ENTRIES 48 - -#define TLBHI_VPN2MASK 0xffffe000 -#define TLBHI_PIDMASK 0x000000ff -#define TLBHI_NPID 256 - -#define TLBLO_PFNMASK 0x3fffffc0 -#define TLBLO_PFNSHIFT 6 -#define TLBLO_D 0x00000004 /* writeable */ -#define TLBLO_V 0x00000002 /* valid bit */ -#define TLBLO_G 0x00000001 /* global access bit */ -#define TLBLO_CMASK 0x00000038 /* cache algorithm mask */ -#define TLBLO_CSHIFT 3 - -#define TLBLO_UNCACHED (CFG_C_UNCACHED<<TLBLO_CSHIFT) -#define TLBLO_NONCOHERENT (CFG_C_NONCOHERENT<<TLBLO_CSHIFT) -#define TLBLO_COHERENTXCL (CFG_C_COHERENTXCL<<TLBLO_CSHIFT) -#define TLBLO_COHERENTXCLW (CFG_C_COHERENTXCLW<<TLBLO_CSHIFT) -#define TLBLO_COHERENTUPD (CFG_C_COHERENTUPD<<TLBLO_CSHIFT) - -#define TLBINX_PROBE 0x80000000 -#define TLBINX_INXMASK 0x0000003f - -#define TLBRAND_RANDMASK 0x0000003f - -#define TLBCTXT_BASEMASK 0xff800000 -#define TLBCTXT_BASESHIFT 23 - -#define TLBCTXT_VPN2MASK 0x007ffff0 -#define TLBCTXT_VPN2SHIFT 4 - -#define TLBPGMASK_MASK 0x01ffe000 -#endif - -#if defined(CPU_R3000) -#define SR_CUMASK 0xf0000000 /* coproc usable bits */ -#define SR_CU3 0x80000000 /* Coprocessor 3 usable */ -#define SR_CU2 0x40000000 /* Coprocessor 2 usable */ -#define SR_CU1 0x20000000 /* Coprocessor 1 usable */ -#define SR_CU0 0x10000000 /* Coprocessor 0 usable */ - -#define SR_BEV 0x00400000 /* use boot exception vectors */ - -/* Cache control bits */ -#define SR_TS 0x00200000 /* TLB shutdown */ -#define SR_PE 0x00100000 /* cache parity error */ -#define SR_CM 0x00080000 /* cache miss */ -#define SR_PZ 0x00040000 /* cache parity zero */ -#define SR_SWC 0x00020000 /* swap cache */ -#define SR_ISC 0x00010000 /* Isolate data cache */ - -/* -** status register interrupt masks and bits -*/ - -#define SR_IMASK 0x0000ff00 /* Interrupt mask */ -#define SR_IMASK8 0x00000000 /* mask level 8 */ -#define SR_IMASK7 0x00008000 /* mask level 7 */ -#define SR_IMASK6 0x0000c000 /* mask level 6 */ -#define SR_IMASK5 0x0000e000 /* mask level 5 */ -#define SR_IMASK4 0x0000f000 /* mask level 4 */ -#define SR_IMASK3 0x0000f800 /* mask level 3 */ -#define SR_IMASK2 0x0000fc00 /* mask level 2 */ -#define SR_IMASK1 0x0000fe00 /* mask level 1 */ -#define SR_IMASK0 0x0000ff00 /* mask level 0 */ - -#define SR_IMASKSHIFT 8 - -#define SR_IBIT8 0x00008000 /* bit level 8 */ -#define SR_IBIT7 0x00004000 /* bit level 7 */ -#define SR_IBIT6 0x00002000 /* bit level 6 */ -#define SR_IBIT5 0x00001000 /* bit level 5 */ -#define SR_IBIT4 0x00000800 /* bit level 4 */ -#define SR_IBIT3 0x00000400 /* bit level 3 */ -#define SR_IBIT2 0x00000200 /* bit level 2 */ -#define SR_IBIT1 0x00000100 /* bit level 1 */ - -#define SR_KUO 0x00000020 /* old kernel/user, 0 => k, 1 => u */ -#define SR_IEO 0x00000010 /* old interrupt enable, 1 => enable */ -#define SR_KUP 0x00000008 /* prev kernel/user, 0 => k, 1 => u */ -#define SR_IEP 0x00000004 /* prev interrupt enable, 1 => enable */ -#define SR_KUC 0x00000002 /* cur kernel/user, 0 => k, 1 => u */ -#define SR_IEC 0x00000001 /* cur interrupt enable, 1 => enable */ -#endif - -#if defined(CPU_R4000) -#define SR_CUMASK 0xf0000000 /* coproc usable bits */ -#define SR_CU3 0x80000000 /* Coprocessor 3 usable */ -#define SR_CU2 0x40000000 /* Coprocessor 2 usable */ -#define SR_CU1 0x20000000 /* Coprocessor 1 usable */ -#define SR_CU0 0x10000000 /* Coprocessor 0 usable */ - -#define SR_RP 0x08000000 /* Reduced power operation */ -#define SR_FR 0x04000000 /* Additional floating point registers */ -#define SR_RE 0x02000000 /* Reverse endian in user mode */ - -#define SR_BEV 0x00400000 /* Use boot exception vectors */ -#define SR_TS 0x00200000 /* TLB shutdown */ -#define SR_SR 0x00100000 /* Soft reset */ -#define SR_CH 0x00040000 /* Cache hit */ -#define SR_CE 0x00020000 /* Use cache ECC */ -#define SR_DE 0x00010000 /* Disable cache exceptions */ - -/* -** status register interrupt masks and bits -*/ - -#define SR_IMASK 0x0000ff00 /* Interrupt mask */ -#define SR_IMASK8 0x00000000 /* mask level 8 */ -#define SR_IMASK7 0x00008000 /* mask level 7 */ -#define SR_IMASK6 0x0000c000 /* mask level 6 */ -#define SR_IMASK5 0x0000e000 /* mask level 5 */ -#define SR_IMASK4 0x0000f000 /* mask level 4 */ -#define SR_IMASK3 0x0000f800 /* mask level 3 */ -#define SR_IMASK2 0x0000fc00 /* mask level 2 */ -#define SR_IMASK1 0x0000fe00 /* mask level 1 */ -#define SR_IMASK0 0x0000ff00 /* mask level 0 */ - -#define SR_IMASKSHIFT 8 - -#define SR_IBIT8 0x00008000 /* bit level 8 */ -#define SR_IBIT7 0x00004000 /* bit level 7 */ -#define SR_IBIT6 0x00002000 /* bit level 6 */ -#define SR_IBIT5 0x00001000 /* bit level 5 */ -#define SR_IBIT4 0x00000800 /* bit level 4 */ -#define SR_IBIT3 0x00000400 /* bit level 3 */ -#define SR_IBIT2 0x00000200 /* bit level 2 */ -#define SR_IBIT1 0x00000100 /* bit level 1 */ - -#define SR_KSMASK 0x00000018 /* Kernel mode mask */ -#define SR_KSUSER 0x00000010 /* User mode */ -#define SR_KSSUPER 0x00000008 /* Supervisor mode */ -#define SR_KSKERNEL 0x00000000 /* Kernel mode */ -#define SR_ERL 0x00000004 /* Error level */ -#define SR_EXL 0x00000002 /* Exception level */ -#define SR_IE 0x00000001 /* Interrupts enabled */ -#endif - - - -/* - * Cause Register - */ -#define CAUSE_BD 0x80000000 /* Branch delay slot */ -#define CAUSE_CEMASK 0x30000000 /* coprocessor error */ -#define CAUSE_CESHIFT 28 - - -#define CAUSE_IPMASK 0x0000FF00 /* Pending interrupt mask */ -#define CAUSE_IPSHIFT 8 - -#define CAUSE_EXCMASK 0x0000003C /* Cause code bits */ -#define CAUSE_EXCSHIFT 2 - -#ifndef XDS -/* -** Coprocessor 0 registers -*/ -#define C0_INX $0 /* tlb index */ -#define C0_RAND $1 /* tlb random */ -#if defined(CPU_R3000) -#define C0_TLBLO $2 /* tlb entry low */ -#endif -#if defined(CPU_R4000) -#define C0_TLBLO0 $2 /* tlb entry low 0 */ -#define C0_TLBLO1 $3 /* tlb entry low 1 */ -#endif - -#define C0_CTXT $4 /* tlb context */ - -#if defined(CPU_R4000) -#define C0_PAGEMASK $5 /* tlb page mask */ -#define C0_WIRED $6 /* number of wired tlb entries */ -#endif - -#define C0_BADVADDR $8 /* bad virtual address */ - -#if defined(CPU_R4000) -#define C0_COUNT $9 /* cycle count */ -#endif - -#define C0_TLBHI $10 /* tlb entry hi */ - -#if defined(CPU_R4000) -#define C0_COMPARE $11 /* cyccle count comparator */ -#endif - -#define C0_SR $12 /* status register */ -#define C0_CAUSE $13 /* exception cause */ -#define C0_EPC $14 /* exception pc */ -#define C0_PRID $15 /* revision identifier */ - -#if defined(CPU_R3000) -#define C0_CONFIG $3 /* configuration register R3081*/ -#endif - -#if defined(CPU_R4000) -#define C0_CONFIG $16 /* configuration register */ -#define C0_LLADDR $17 /* linked load address */ -#define C0_WATCHLO $18 /* watchpoint trap register */ -#define C0_WATCHHI $19 /* watchpoint trap register */ -#define C0_XCTXT $20 /* extended tlb context */ -#define C0_ECC $26 /* secondary cache ECC control */ -#define C0_CACHEERR $27 /* cache error status */ -#define C0_TAGLO $28 /* cache tag lo */ -#define C0_TAGHI $29 /* cache tag hi */ -#define C0_ERRPC $30 /* cache error pc */ -#endif - -#endif XDS - -#ifdef R4650 -#define IWATCH $18 -#define DWATCH $19 -#define IBASE $0 -#define IBOUND $1 -#define DBASE $2 -#define DBOUND $3 -#define CALG $17 -#endif - -#endif /* _IDTCPU_H__ */ - diff --git a/c/src/exec/score/cpu/mips64orion/idtmon.h b/c/src/exec/score/cpu/mips64orion/idtmon.h deleted file mode 100644 index b42211ed5c..0000000000 --- a/c/src/exec/score/cpu/mips64orion/idtmon.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - -Based upon IDT provided code with the following release: - -This source code has been made available to you by IDT on an AS-IS -basis. Anyone receiving this source is licensed under IDT copyrights -to use it in any way he or she deems fit, including copying it, -modifying it, compiling it, and redistributing it either with or -without modifications. No license under IDT patents or patent -applications is to be implied by the copyright license. - -Any user of this software should understand that IDT cannot provide -technical support for this software and will not be responsible for -any consequences resulting from the use of this software. - -Any person who transfers this source code or any derivative work must -include the IDT copyright notice, this paragraph, and the preceeding -two paragraphs in the transferred software. - -COPYRIGHT IDT CORPORATION 1996 -LICENSED MATERIAL - PROGRAM PROPERTY OF IDT - - $Id$ -*/ - -/* -** idtmon.h - General header file for the IDT Prom Monitor -** -** Copyright 1989 Integrated Device Technology, Inc. -** All Rights Reserved. -** -** June 1989 - D.Cahoon -*/ -#ifndef __IDTMON_H__ -#define __IDTMON_H__ - -/* -** P_STACKSIZE is the size of the Prom Stack. -** the prom stack grows downward -*/ -#define P_STACKSIZE 0x2000 /* sets stack size to 8k */ - -/* -** M_BUSWIDTH -** Memory bus width (including bank interleaving) in bytes -** used when doing memory sizing to prevent bus capacitance -** reporting ghost memory locations -*/ -#if defined(CPU_R3000) -#define M_BUSWIDTH 8 /* 32bit memory bank interleaved */ -#endif -#if defined(CPU_R4000) -#define M_BUSWIDTH 16 /* 64 bit memory bank interleaved */ -#endif - -/* -** this is the default value for the number of bytes to add in calculating -** the checksums in the checksum command -*/ -#define CHK_SUM_CNT 0x20000 /* number of bytes to calc chksum for */ - -/* -** Monitor modes -*/ -#define MODE_MONITOR 5 /* IDT Prom Monitor is executing */ -#define MODE_USER 0xa /* USER is executing */ - -/* -** memory reference widths -*/ -#define SW_BYTE 1 -#define SW_HALFWORD 2 -#define SW_WORD 4 -#define SW_TRIBYTEL 12 -#define SW_TRIBYTER 20 - -#ifdef CPU_R4000 -/* -** definitions for select_cache call -*/ -#define DCACHE 0 -#define ICACHE 1 -#define SCACHE 2 - -#endif - -#if defined (CLANGUAGE) || defined(_LANGUAGE_C) -typedef struct { - unsigned int mem_size; - unsigned int icache_size; - unsigned int dcache_size; -#ifdef CPU_R4000 - unsigned int scache_size; -#endif - - } mem_config; - -#endif CLANGUAGE || defined(_LANGUAGE_C) - -/* -** general equates for diagnostics and boolean functions -*/ -#define PASS 0 -#define FAIL 1 - -#ifndef TRUE -#define TRUE 1 -#endif TRUE -#ifndef NULL -#define NULL 0 -#endif NULL - -#ifndef FALSE -#define FALSE 0 -#endif FALSE - - -/* -** portablility equates -*/ - -#ifndef BOOL -#define BOOL unsigned int -#endif BOOL - -#ifndef GLOBAL -#define GLOBAL /**/ -#endif GLOBAL - -#ifndef MLOCAL -#define MLOCAL static -#endif MLOCAL - - -#ifdef XDS -#define CONST const -#else -#define CONST -#endif XDS - -#define u_char unsigned char -#define u_short unsigned short -#define u_int unsigned int -/* -** assembly instructions for compatability between xds and mips -*/ -#ifndef XDS -#define sllv sll -#define srlv srl -#endif XDS -/* -** debugger macros for assembly language routines. Allows the -** programmer to set up the necessary stack frame info -** required by debuggers to do stack traces. -*/ - -#ifndef XDS -#define FRAME(name,frm_reg,offset,ret_reg) \ - .globl name; \ - .ent name; \ -name:; \ - .frame frm_reg,offset,ret_reg -#define ENDFRAME(name) \ - .end name -#else -#define FRAME(name,frm_reg,offset,ret_reg) \ - .globl _##name;\ -_##name: -#define ENDFRAME(name) -#endif XDS -#endif /* __IDTMON_H__ */ diff --git a/c/src/exec/score/cpu/mips64orion/iregdef.h b/c/src/exec/score/cpu/mips64orion/iregdef.h deleted file mode 100644 index f0953da852..0000000000 --- a/c/src/exec/score/cpu/mips64orion/iregdef.h +++ /dev/null @@ -1,325 +0,0 @@ -/* - -Based upon IDT provided code with the following release: - -This source code has been made available to you by IDT on an AS-IS -basis. Anyone receiving this source is licensed under IDT copyrights -to use it in any way he or she deems fit, including copying it, -modifying it, compiling it, and redistributing it either with or -without modifications. No license under IDT patents or patent -applications is to be implied by the copyright license. - -Any user of this software should understand that IDT cannot provide -technical support for this software and will not be responsible for -any consequences resulting from the use of this software. - -Any person who transfers this source code or any derivative work must -include the IDT copyright notice, this paragraph, and the preceeding -two paragraphs in the transferred software. - -COPYRIGHT IDT CORPORATION 1996 -LICENSED MATERIAL - PROGRAM PROPERTY OF IDT - - $Id$ -*/ - -/* -** iregdef.h - IDT R3000 register structure header file -** -** Copyright 1989 Integrated Device Technology, Inc -** All Rights Reserved -** -*/ -#ifndef __IREGDEF_H__ -#define __IREGDEF_H__ - -/* - * 950313: Ketan added sreg/lreg and R_SZ for 64-bit saves - * added Register definition for XContext reg. - * Look towards end of this file. - */ -/* -** register names -*/ -#define r0 $0 -#define r1 $1 -#define r2 $2 -#define r3 $3 -#define r4 $4 -#define r5 $5 -#define r6 $6 -#define r7 $7 -#define r8 $8 -#define r9 $9 -#define r10 $10 -#define r11 $11 -#define r12 $12 -#define r13 $13 - -#define r14 $14 -#define r15 $15 -#define r16 $16 -#define r17 $17 -#define r18 $18 -#define r19 $19 -#define r20 $20 -#define r21 $21 -#define r22 $22 -#define r23 $23 -#define r24 $24 -#define r25 $25 -#define r26 $26 -#define r27 $27 -#define r28 $28 -#define r29 $29 -#define r30 $30 -#define r31 $31 - -#define fp0 $f0 -#define fp1 $f1 -#define fp2 $f2 -#define fp3 $f3 -#define fp4 $f4 -#define fp5 $f5 -#define fp6 $f6 -#define fp7 $f7 -#define fp8 $f8 -#define fp9 $f9 -#define fp10 $f10 -#define fp11 $f11 -#define fp12 $f12 -#define fp13 $f13 -#define fp14 $f14 -#define fp15 $f15 -#define fp16 $f16 -#define fp17 $f17 -#define fp18 $f18 -#define fp19 $f19 -#define fp20 $f20 -#define fp21 $f21 -#define fp22 $f22 -#define fp23 $f23 -#define fp24 $f24 -#define fp25 $f25 -#define fp26 $f26 -#define fp27 $f27 -#define fp28 $f28 -#define fp29 $f29 -#define fp30 $f30 -#define fp31 $f31 - -#define fcr0 $0 -#define fcr30 $30 -#define fcr31 $31 - -#define zero $0 /* wired zero */ -#define AT $at /* assembler temp */ -#define v0 $2 /* return value */ -#define v1 $3 -#define a0 $4 /* argument registers a0-a3 */ -#define a1 $5 -#define a2 $6 -#define a3 $7 -#define t0 $8 /* caller saved t0-t9 */ -#define t1 $9 -#define t2 $10 -#define t3 $11 -#define t4 $12 -#define t5 $13 -#define t6 $14 -#define t7 $15 -#define s0 $16 /* callee saved s0-s8 */ -#define s1 $17 -#define s2 $18 -#define s3 $19 -#define s4 $20 -#define s5 $21 -#define s6 $22 -#define s7 $23 -#define t8 $24 -#define t9 $25 -#define k0 $26 /* kernel usage */ -#define k1 $27 /* kernel usage */ -#define gp $28 /* sdata pointer */ -#define sp $29 /* stack pointer */ -#define s8 $30 /* yet another saved reg for the callee */ -#define fp $30 /* frame pointer - this is being phased out by MIPS */ -#define ra $31 /* return address */ - - -/* -** relative position of registers in save reg area -*/ -#define R_R0 0 -#define R_R1 1 -#define R_R2 2 -#define R_R3 3 -#define R_R4 4 -#define R_R5 5 -#define R_R6 6 -#define R_R7 7 -#define R_R8 8 -#define R_R9 9 -#define R_R10 10 -#define R_R11 11 -#define R_R12 12 -#define R_R13 13 -#define R_R14 14 -#define R_R15 15 -#define R_R16 16 -#define R_R17 17 -#define R_R18 18 -#define R_R19 19 -#define R_R20 20 -#define R_R21 21 -#define R_R22 22 -#define R_R23 23 -#define R_R24 24 -#define R_R25 25 -#define R_R26 26 -#define R_R27 27 -#define R_R28 28 -#define R_R29 29 -#define R_R30 30 -#define R_R31 31 -#define R_F0 32 -#define R_F1 33 -#define R_F2 34 -#define R_F3 35 -#define R_F4 36 -#define R_F5 37 -#define R_F6 38 -#define R_F7 39 -#define R_F8 40 -#define R_F9 41 -#define R_F10 42 -#define R_F11 43 -#define R_F12 44 -#define R_F13 45 -#define R_F14 46 -#define R_F15 47 -#define R_F16 48 -#define R_F17 49 -#define R_F18 50 -#define R_F19 51 -#define R_F20 52 -#define R_F21 53 -#define R_F22 54 -#define R_F23 55 -#define R_F24 56 -#define R_F25 57 -#define R_F26 58 -#define R_F27 59 -#define R_F28 60 -#define R_F29 61 -#define R_F30 62 -#define R_F31 63 -#define NCLIENTREGS 64 -#define R_EPC 64 -#define R_MDHI 65 -#define R_MDLO 66 -#define R_SR 67 -#define R_CAUSE 68 -#define R_TLBHI 69 -#if defined(CPU_R3000) -#define R_TLBLO 70 -#endif -#if defined(CPU_R4000) -#define R_TLBLO0 70 -#endif -#define R_BADVADDR 71 -#define R_INX 72 -#define R_RAND 73 -#define R_CTXT 74 -#define R_EXCTYPE 75 -#define R_MODE 76 -#define R_PRID 77 -#define R_FCSR 78 -#define R_FEIR 79 -#if defined(CPU_R3000) -#define NREGS 80 -#endif -#if defined(CPU_R4000) -#define R_TLBLO1 80 -#define R_PAGEMASK 81 -#define R_WIRED 82 -#define R_COUNT 83 -#define R_COMPARE 84 -#define R_CONFIG 85 -#define R_LLADDR 86 -#define R_WATCHLO 87 -#define R_WATCHHI 88 -#define R_ECC 89 -#define R_CACHEERR 90 -#define R_TAGLO 91 -#define R_TAGHI 92 -#define R_ERRPC 93 -#define R_XCTXT 94 /* Ketan added from SIM64bit */ - -#define NREGS 95 -#endif - -/* -** For those who like to think in terms of the compiler names for the regs -*/ -#define R_ZERO R_R0 -#define R_AT R_R1 -#define R_V0 R_R2 -#define R_V1 R_R3 -#define R_A0 R_R4 -#define R_A1 R_R5 -#define R_A2 R_R6 -#define R_A3 R_R7 -#define R_T0 R_R8 -#define R_T1 R_R9 -#define R_T2 R_R10 -#define R_T3 R_R11 -#define R_T4 R_R12 -#define R_T5 R_R13 -#define R_T6 R_R14 -#define R_T7 R_R15 -#define R_S0 R_R16 -#define R_S1 R_R17 -#define R_S2 R_R18 -#define R_S3 R_R19 -#define R_S4 R_R20 -#define R_S5 R_R21 -#define R_S6 R_R22 -#define R_S7 R_R23 -#define R_T8 R_R24 -#define R_T9 R_R25 -#define R_K0 R_R26 -#define R_K1 R_R27 -#define R_GP R_R28 -#define R_SP R_R29 -#define R_FP R_R30 -#define R_RA R_R31 - -/* Ketan added the following */ -#ifdef CPU_R3000 -#define sreg sw -#define lreg lw -#define rmfc0 mfc0 -#define rmtc0 mtc0 -#define R_SZ 4 -#endif CPU_R3000 - -#ifdef CPU_R4000 -#if __mips < 3 -#define sreg sw -#define lreg lw -#define rmfc0 mfc0 -#define rmtc0 mtc0 -#define R_SZ 4 -#else -#define sreg sd -#define lreg ld -#define rmfc0 dmfc0 -#define rmtc0 dmtc0 -#define R_SZ 8 -#endif -#endif CPU_R4000 -/* Ketan till here */ - -#endif /* __IREGDEF_H__ */ - diff --git a/c/src/exec/score/cpu/mips64orion/mips64orion.h b/c/src/exec/score/cpu/mips64orion/mips64orion.h deleted file mode 100644 index ec89a32a0d..0000000000 --- a/c/src/exec/score/cpu/mips64orion/mips64orion.h +++ /dev/null @@ -1,74 +0,0 @@ -/* mips64orion.h - * - * Author: Craig Lebakken <craigl@transition.com> - * - * COPYRIGHT (c) 1996 by Transition Networks Inc. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of Transition Networks not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * Transition Networks makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/score/cpu/no_cpu/no_cpu.h: - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ -/* @(#)mips64orion.h 08/29/96 1.3 */ - -#ifndef _INCLUDE_MIPS64ORION_h -#define _INCLUDE_MIPS64ORION_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This file contains the information required to build - * RTEMS for a particular member of the "no cpu" - * family when executing in protected mode. It does - * this by setting variables to indicate which implementation - * dependent features are present in a particular member - * of the family. - */ - -#if defined(R4650) - -#define CPU_MODEL_NAME "R4650" -#define MIPS64ORION_HAS_FPU 1 - -#elif defined(R4600) - -#define CPU_MODEL_NAME "R4600" -#define MIPS64ORION_HAS_FPU 1 - -#else - -#error "Unsupported CPU Model" - -#endif - -/* - * Define the name of the CPU family. - */ - -#define CPU_NAME "MIPS R46xxx" - -#ifdef __cplusplus -} -#endif - -#endif /* ! _INCLUDE_MIPS64ORION_h */ -/* end of include file */ diff --git a/c/src/exec/score/cpu/mips64orion/mipstypes.h b/c/src/exec/score/cpu/mips64orion/mipstypes.h deleted file mode 100644 index 50f28ccf9b..0000000000 --- a/c/src/exec/score/cpu/mips64orion/mipstypes.h +++ /dev/null @@ -1,73 +0,0 @@ -/* mipstypes.h - * - * This include file contains type definitions pertaining to the IDT 4650 - * processor family. - * - * Author: Craig Lebakken <craigl@transition.com> - * - * COPYRIGHT (c) 1996 by Transition Networks Inc. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of Transition Networks not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * Transition Networks makes no representations about the suitability - * of this software for any purpose. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ -/* @(#)mipstypes.h 08/20/96 1.4 */ - -#ifndef __MIPS_TYPES_h -#define __MIPS_TYPES_h - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section defines the basic types for this processor. - */ - -typedef unsigned char unsigned8; /* unsigned 8-bit integer */ -typedef unsigned short unsigned16; /* unsigned 16-bit integer */ -typedef unsigned int unsigned32; /* unsigned 32-bit integer */ -typedef unsigned long long unsigned64; /* unsigned 64-bit integer */ - -typedef unsigned16 Priority_Bit_map_control; - -typedef signed char signed8; /* 8-bit signed integer */ -typedef signed short signed16; /* 16-bit signed integer */ -typedef signed int signed32; /* 32-bit signed integer */ -typedef signed long long signed64; /* 64 bit signed integer */ - -typedef unsigned32 boolean; /* Boolean value */ - -typedef float single_precision; /* single precision float */ -typedef double double_precision; /* double precision float */ - -typedef void mips_isr; -typedef void ( *mips_isr_entry )( void ); - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/mips64orion/rtems.c b/c/src/exec/score/cpu/mips64orion/rtems.c deleted file mode 100644 index 356f1b8b9e..0000000000 --- a/c/src/exec/score/cpu/mips64orion/rtems.c +++ /dev/null @@ -1,53 +0,0 @@ -/* rtems.c ===> rtems.S or rtems.s - * - * This file contains the single entry point code for - * the XXX implementation of RTEMS. - * - * NOTE: This is supposed to be a .S or .s file NOT a C file. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -/* - * Rather than deleting this, it is commented out to (hopefully) help - * the submitter send updates. - * - * static char _sccsid[] = "@(#)rtems.c 03/15/96 1.1\n"; - */ - - -/* - * This is supposed to be an assembly file. This means that system.h - * and cpu.h should not be included in a "real" rtems file. - */ - -#include <rtems/system.h> -#include <rtems/score/cpu.h> -/* #include "asm.h> */ - -/* - * RTEMS - * - * This routine jumps to the directive indicated in the - * CPU defined register. This routine is used when RTEMS is - * linked by itself and placed in ROM. This routine is the - * first address in the ROM space for RTEMS. The user "calls" - * this address with the directive arguments in the normal place. - * This routine then jumps indirectly to the correct directive - * preserving the arguments. The directive should not realize - * it has been "wrapped" in this way. The table "_Entry_points" - * is used to look up the directive. - */ - -void RTEMS() -{ -} - diff --git a/c/src/exec/score/cpu/no_cpu/Makefile.in b/c/src/exec/score/cpu/no_cpu/Makefile.in deleted file mode 100644 index 8277c5e5b7..0000000000 --- a/c/src/exec/score/cpu/no_cpu/Makefile.in +++ /dev/null @@ -1,84 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - -RELS=$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -# Normally cpu_asm and rtems are assembly files -C_PIECES=cpu cpu_asm rtems -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) - -H_FILES=$(srcdir)/cpu.h $(srcdir)/no_cpu.h $(srcdir)/no_cputypes.h - -# H_FILES that get installed externally -EXTERNAL_H_FILES = $(srcdir)/asm.h - -# Assembly source names, if any, go here -- minus the .s -# Normally cpu_asm and rtems are assembly files -S_PIECES= -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) - -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(RELS) - -$(ARCH)/rtems-cpu.rel: $(OBJS) - $(make-rel) - -# Install the program(s), appending _g or _p as appropriate. -# for include files, just use $(INSTALL) -install: all - -# Real ports using the gnu tools will need to have bsp_specs!!! -# ${PROJECT_RELEASE}/lib/bsp_specs -preinstall: $(ARCH) \ - $(PROJECT_INCLUDE)/rtems/score/targopts.h - $(INSTALL) -m 444 ${H_FILES} $(PROJECT_INCLUDE)/rtems/score -# we will share the basic cpu file - $(INSTALL) -m 444 ${EXTERNAL_H_FILES} $(PROJECT_INCLUDE) - -$(PROJECT_INCLUDE)/rtems/score/targopts.h: $(ARCH)/targopts.h-tmp - $(INSTALL) -m 444 $(ARCH)/targopts.h-tmp $@ - -# $(ARCH)/targopts.h-tmp rule is in leaf.cfg - -# Real ports using the gnu tools will need to have bsp_specs!!! -#${PROJECT_RELEASE}/lib/bsp_specs: $(ARCH)/bsp_specs.tmp -# $(INSTALL) -m 444 $(ARCH)/bsp_specs.tmp $@ - -# $(ARCH)/bsp_specs.tmp rule is in leaf.cfg diff --git a/c/src/exec/score/cpu/no_cpu/asm.h b/c/src/exec/score/cpu/no_cpu/asm.h deleted file mode 100644 index 1ca7fd435b..0000000000 --- a/c/src/exec/score/cpu/no_cpu/asm.h +++ /dev/null @@ -1,101 +0,0 @@ -/* asm.h - * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. - * - * - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - * - * COPYRIGHT: - * - * This file is based on similar code found in newlib available - * from ftp.cygnus.com. The file which was used had no copyright - * notice. This file is freely distributable as long as the source - * of the file is noted. This file is: - * - * COPYRIGHT (c) 1994-1997. - * On-Line Applications Research Corporation (OAR). - * - * $Id$ - */ - -#ifndef __NO_CPU_ASM_h -#define __NO_CPU_ASM_h - -/* - * Indicate we are in an assembly file and get the basic CPU definitions. - */ - -#ifndef ASM -#define ASM -#endif -#include <rtems/score/targopts.h> -#include <rtems/score/no_cpu.h> - -/* - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. - */ - -#ifndef __USER_LABEL_PREFIX__ -#define __USER_LABEL_PREFIX__ _ -#endif - -#ifndef __REGISTER_PREFIX__ -#define __REGISTER_PREFIX__ -#endif - -/* ANSI concatenation macros. */ - -#define CONCAT1(a, b) CONCAT2(a, b) -#define CONCAT2(a, b) a ## b - -/* Use the right prefix for global labels. */ - -#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) - -/* Use the right prefix for registers. */ - -#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) - -/* - * define macros for all of the registers on this CPU - * - * EXAMPLE: #define d0 REG (d0) - */ - -/* - * Define macros to handle section beginning and ends. - */ - - -#define BEGIN_CODE_DCL .text -#define END_CODE_DCL -#define BEGIN_DATA_DCL .data -#define END_DATA_DCL -#define BEGIN_CODE .text -#define END_CODE -#define BEGIN_DATA -#define END_DATA -#define BEGIN_BSS -#define END_BSS -#define END - -/* - * Following must be tailor for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. - */ - -#define PUBLIC(sym) .globl SYM (sym) -#define EXTERN(sym) .globl SYM (sym) - -#endif -/* end of include file */ - - diff --git a/c/src/exec/score/cpu/no_cpu/cpu.c b/c/src/exec/score/cpu/no_cpu/cpu.c deleted file mode 100644 index 58e71f9266..0000000000 --- a/c/src/exec/score/cpu/no_cpu/cpu.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * XXX CPU Dependent Source - * - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/score/isr.h> -#include <rtems/score/wkspace.h> - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: - * cpu_table - CPU table to initialize - * thread_dispatch - address of disptaching routine - */ - - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) /* ignored on this CPU */ -) -{ - /* - * The thread_dispatch argument is the address of the entry point - * for the routine called at the end of an ISR once it has been - * decided a context switch is necessary. On some compilation - * systems it is difficult to call a high-level language routine - * from assembly. This allows us to trick these systems. - * - * If you encounter this problem save the entry point in a CPU - * dependent variable. - */ - - _CPU_Thread_dispatch_pointer = thread_dispatch; - - /* - * If there is not an easy way to initialize the FP context - * during Context_Initialize, then it is usually easier to - * save an "uninitialized" FP context here and copy it to - * the task's during Context_Initialize. - */ - - /* FP context initialization support goes here */ - - _CPU_Table = *cpu_table; -} - -/*PAGE - * - * _CPU_ISR_Get_level - */ - -unsigned32 _CPU_ISR_Get_level( void ) -{ - /* - * This routine returns the current interrupt level. - */ - - return 0; -} - -/*PAGE - * - * _CPU_ISR_install_raw_handler - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - /* - * This is where we install the interrupt handler into the "raw" interrupt - * table used by the CPU to dispatch interrupt handlers. - */ -} - -/*PAGE - * - * _CPU_ISR_install_vector - * - * This kernel routine installs the RTEMS handler for the - * specified vector. - * - * Input parameters: - * vector - interrupt vector number - * old_handler - former ISR for this vector number - * new_handler - replacement ISR for this vector number - * - * Output parameters: NONE - * - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - *old_handler = _ISR_Vector_table[ vector ]; - - /* - * If the interrupt vector table is a table of pointer to isr entry - * points, then we need to install the appropriate RTEMS interrupt - * handler for this vector number. - */ - - _CPU_ISR_install_raw_handler( vector, new_handler, old_handler ); - - /* - * We put the actual user ISR address in '_ISR_vector_table'. This will - * be used by the _ISR_Handler so the user gets control. - */ - - _ISR_Vector_table[ vector ] = new_handler; -} - -/*PAGE - * - * _CPU_Install_interrupt_stack - */ - -void _CPU_Install_interrupt_stack( void ) -{ -} - -/*PAGE - * - * _CPU_Thread_Idle_body - * - * NOTES: - * - * 1. This is the same as the regular CPU independent algorithm. - * - * 2. If you implement this using a "halt", "idle", or "shutdown" - * instruction, then don't forget to put it in an infinite loop. - * - * 3. Be warned. Some processors with onboard DMA have been known - * to stop the DMA if the CPU were put in IDLE mode. This might - * also be a problem with other on-chip peripherals. So use this - * hook with caution. - */ - -void _CPU_Thread_Idle_body( void ) -{ - - for( ; ; ) - /* insert your "halt" instruction here */ ; -} diff --git a/c/src/exec/score/cpu/no_cpu/cpu.h b/c/src/exec/score/cpu/no_cpu/cpu.h deleted file mode 100644 index 68d75c6b9f..0000000000 --- a/c/src/exec/score/cpu/no_cpu/cpu.h +++ /dev/null @@ -1,878 +0,0 @@ -/* cpu.h - * - * This include file contains information pertaining to the XXX - * processor. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __CPU_h -#define __CPU_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/score/no_cpu.h> /* pick up machine definitions */ -#ifndef ASM -#include <rtems/score/no_cputypes.h> -#endif - -/* conditional compilation parameters */ - -/* - * Should the calls to _Thread_Enable_dispatch be inlined? - * - * If TRUE, then they are inlined. - * If FALSE, then a subroutine call is made. - * - * Basically this is an example of the classic trade-off of size - * versus speed. Inlining the call (TRUE) typically increases the - * size of RTEMS while speeding up the enabling of dispatching. - * [NOTE: In general, the _Thread_Dispatch_disable_level will - * only be 0 or 1 unless you are in an interrupt handler and that - * interrupt handler invokes the executive.] When not inlined - * something calls _Thread_Enable_dispatch which in turns calls - * _Thread_Dispatch. If the enable dispatch is inlined, then - * one subroutine call is avoided entirely.] - */ - -#define CPU_INLINE_ENABLE_DISPATCH FALSE - -/* - * Should the body of the search loops in _Thread_queue_Enqueue_priority - * be unrolled one time? In unrolled each iteration of the loop examines - * two "nodes" on the chain being searched. Otherwise, only one node - * is examined per iteration. - * - * If TRUE, then the loops are unrolled. - * If FALSE, then the loops are not unrolled. - * - * The primary factor in making this decision is the cost of disabling - * and enabling interrupts (_ISR_Flash) versus the cost of rest of the - * body of the loop. On some CPUs, the flash is more expensive than - * one iteration of the loop body. In this case, it might be desirable - * to unroll the loop. It is important to note that on some CPUs, this - * code is the longest interrupt disable period in RTEMS. So it is - * necessary to strike a balance when setting this parameter. - */ - -#define CPU_UNROLL_ENQUEUE_PRIORITY TRUE - -/* - * Does RTEMS manage a dedicated interrupt stack in software? - * - * If TRUE, then a stack is allocated in _Interrupt_Manager_initialization. - * If FALSE, nothing is done. - * - * If the CPU supports a dedicated interrupt stack in hardware, - * then it is generally the responsibility of the BSP to allocate it - * and set it up. - * - * If the CPU does not support a dedicated interrupt stack, then - * the porter has two options: (1) execute interrupts on the - * stack of the interrupted task, and (2) have RTEMS manage a dedicated - * interrupt stack. - * - * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - */ - -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK FALSE - -/* - * Does this CPU have hardware support for a dedicated interrupt stack? - * - * If TRUE, then it must be installed during initialization. - * If FALSE, then no installation is performed. - * - * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - */ - -#define CPU_HAS_HARDWARE_INTERRUPT_STACK TRUE - -/* - * Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager? - * - * If TRUE, then the memory is allocated during initialization. - * If FALSE, then the memory is allocated during initialization. - * - * This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE - * or CPU_INSTALL_HARDWARE_INTERRUPT_STACK is TRUE. - */ - -#define CPU_ALLOCATE_INTERRUPT_STACK TRUE - -/* - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? - */ - -#define CPU_ISR_PASSES_FRAME_POINTER 0 - -/* - * Does the CPU have hardware floating point? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored. - * - * If there is a FP coprocessor such as the i387 or mc68881, then - * the answer is TRUE. - * - * The macro name "NO_CPU_HAS_FPU" should be made CPU specific. - * It indicates whether or not this CPU model has FP support. For - * example, it would be possible to have an i386_nofp CPU model - * which set this to false to indicate that you have an i386 without - * an i387 and wish to leave floating point support out of RTEMS. - */ - -#if ( NO_CPU_HAS_FPU == 1 ) -#define CPU_HARDWARE_FP TRUE -#else -#define CPU_HARDWARE_FP FALSE -#endif - -/* - * Are all tasks RTEMS_FLOATING_POINT tasks implicitly? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed. - * - * So far, the only CPU in which this option has been used is the - * HP PA-RISC. The HP C compiler and gcc both implicitly use the - * floating point registers to perform integer multiplies. If - * a function which you would not think utilize the FP unit DOES, - * then one can not easily predict which tasks will use the FP hardware. - * In this case, this option should be TRUE. - * - * If CPU_HARDWARE_FP is FALSE, then this should be FALSE as well. - */ - -#define CPU_ALL_TASKS_ARE_FP TRUE - -/* - * Should the IDLE task have a floating point context? - * - * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task - * and it has a floating point context which is switched in and out. - * If FALSE, then the IDLE task does not have a floating point context. - * - * Setting this to TRUE negatively impacts the time required to preempt - * the IDLE task from an interrupt because the floating point context - * must be saved as part of the preemption. - */ - -#define CPU_IDLE_TASK_IS_FP FALSE - -/* - * Should the saving of the floating point registers be deferred - * until a context switch is made to another different floating point - * task? - * - * If TRUE, then the floating point context will not be stored until - * necessary. It will remain in the floating point registers and not - * disturned until another floating point task is switched to. - * - * If FALSE, then the floating point context is saved when a floating - * point task is switched out and restored when the next floating point - * task is restored. The state of the floating point registers between - * those two operations is not specified. - * - * If the floating point context does NOT have to be saved as part of - * interrupt dispatching, then it should be safe to set this to TRUE. - * - * Setting this flag to TRUE results in using a different algorithm - * for deciding when to save and restore the floating point context. - * The deferred FP switch algorithm minimizes the number of times - * the FP context is saved and restored. The FP context is not saved - * until a context switch is made to another, different FP task. - * Thus in a system with only one FP task, the FP context will never - * be saved or restored. - */ - -#define CPU_USE_DEFERRED_FP_SWITCH TRUE - -/* - * Does this port provide a CPU dependent IDLE task implementation? - * - * If TRUE, then the routine _CPU_Thread_Idle_body - * must be provided and is the default IDLE thread body instead of - * _CPU_Thread_Idle_body. - * - * If FALSE, then use the generic IDLE thread body if the BSP does - * not provide one. - * - * This is intended to allow for supporting processors which have - * a low power or idle mode. When the IDLE thread is executed, then - * the CPU can be powered down. - * - * The order of precedence for selecting the IDLE thread body is: - * - * 1. BSP provided - * 2. CPU dependent (if provided) - * 3. generic (if no BSP and no CPU dependent) - */ - -#define CPU_PROVIDES_IDLE_THREAD_BODY TRUE - -/* - * Does the stack grow up (toward higher addresses) or down - * (toward lower addresses)? - * - * If TRUE, then the grows upward. - * If FALSE, then the grows toward smaller addresses. - */ - -#define CPU_STACK_GROWS_UP TRUE - -/* - * The following is the variable attribute used to force alignment - * of critical RTEMS structures. On some processors it may make - * sense to have these aligned on tighter boundaries than - * the minimum requirements of the compiler in order to have as - * much of the critical data area as possible in a cache line. - * - * The placement of this macro in the declaration of the variables - * is based on the syntactically requirements of the GNU C - * "__attribute__" extension. For example with GNU C, use - * the following to force a structures to a 32 byte boundary. - * - * __attribute__ ((aligned (32))) - * - * NOTE: Currently only the Priority Bit Map table uses this feature. - * To benefit from using this, the data must be heavily - * used so it will stay in the cache and used frequently enough - * in the executive to justify turning this on. - */ - -#define CPU_STRUCTURE_ALIGNMENT - -/* - * Define what is required to specify how the network to host conversion - * routines are handled. - */ - -#define CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE -#define CPU_BIG_ENDIAN TRUE -#define CPU_LITTLE_ENDIAN FALSE - -/* - * The following defines the number of bits actually used in the - * interrupt field of the task mode. How those bits map to the - * CPU interrupt levels is defined by the routine _CPU_ISR_Set_level(). - */ - -#define CPU_MODES_INTERRUPT_MASK 0x00000001 - -/* - * Processor defined structures - * - * Examples structures include the descriptor tables from the i386 - * and the processor control structure on the i960ca. - */ - -/* may need to put some structures here. */ - -/* - * Contexts - * - * Generally there are 2 types of context to save. - * 1. Interrupt registers to save - * 2. Task level registers to save - * - * This means we have the following 3 context items: - * 1. task level context stuff:: Context_Control - * 2. floating point task stuff:: Context_Control_fp - * 3. special interrupt level context :: Context_Control_interrupt - * - * On some processors, it is cost-effective to save only the callee - * preserved registers during a task context switch. This means - * that the ISR code needs to save those registers which do not - * persist across function calls. It is not mandatory to make this - * distinctions between the caller/callee saves registers for the - * purpose of minimizing context saved during task switch and on interrupts. - * If the cost of saving extra registers is minimal, simplicity is the - * choice. Save the same context on interrupt entry as for tasks in - * this case. - * - * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then - * care should be used in designing the context area. - * - * On some CPUs with hardware floating point support, the Context_Control_fp - * structure will not be used or it simply consist of an array of a - * fixed number of bytes. This is done when the floating point context - * is dumped by a "FP save context" type instruction and the format - * is not really defined by the CPU. In this case, there is no need - * to figure out the exact format -- only the size. Of course, although - * this is enough information for RTEMS, it is probably not enough for - * a debugger such as gdb. But that is another problem. - */ - -typedef struct { - unsigned32 some_integer_register; - unsigned32 some_system_register; -} Context_Control; - -typedef struct { - double some_float_register; -} Context_Control_fp; - -typedef struct { - unsigned32 special_interrupt_register; -} CPU_Interrupt_frame; - - -/* - * The following table contains the information required to configure - * the XXX processor specific parameters. - */ - -typedef struct { - void (*pretasking_hook)( void ); - void (*predriver_hook)( void ); - void (*postdriver_hook)( void ); - void (*idle_task)( void ); - boolean do_zero_of_workspace; - unsigned32 idle_task_stack_size; - unsigned32 interrupt_stack_size; - unsigned32 extra_mpci_receive_server_stack; - void * (*stack_allocate_hook)( unsigned32 ); - void (*stack_free_hook)( void* ); - /* end of fields required on all CPUs */ - - unsigned32 some_other_cpu_dependent_info; -} rtems_cpu_table; - -/* - * This variable is optional. It is used on CPUs on which it is difficult - * to generate an "uninitialized" FP context. It is filled in by - * _CPU_Initialize and copied into the task's FP context area during - * _CPU_Context_Initialize. - */ - -SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context; - -/* - * On some CPUs, RTEMS supports a software managed interrupt stack. - * This stack is allocated by the Interrupt Manager and the switch - * is performed in _ISR_Handler. These variables contain pointers - * to the lowest and highest addresses in the chunk of memory allocated - * for the interrupt stack. Since it is unknown whether the stack - * grows up or down (in general), this give the CPU dependent - * code the option of picking the version it wants to use. - * - * NOTE: These two variables are required if the macro - * CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE. - */ - -SCORE_EXTERN void *_CPU_Interrupt_stack_low; -SCORE_EXTERN void *_CPU_Interrupt_stack_high; - -/* - * With some compilation systems, it is difficult if not impossible to - * call a high-level language routine from assembly language. This - * is especially true of commercial Ada compilers and name mangling - * C++ ones. This variable can be optionally defined by the CPU porter - * and contains the address of the routine _Thread_Dispatch. This - * can make it easier to invoke that routine at the end of the interrupt - * sequence (if a dispatch is necessary). - */ - -SCORE_EXTERN void (*_CPU_Thread_dispatch_pointer)(); - -/* - * Nothing prevents the porter from declaring more CPU specific variables. - */ - -/* XXX: if needed, put more variables here */ - -/* - * The size of the floating point context area. On some CPUs this - * will not be a "sizeof" because the format of the floating point - * area is not defined -- only the size is. This is usually on - * CPUs with a "floating point save context" instruction. - */ - -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) - -/* - * Amount of extra stack (above minimum stack size) required by - * MPCI receive server thread. Remember that in a multiprocessor - * system this thread must exist and be able to process all directives. - */ - -#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0 - -/* - * This defines the number of entries in the ISR_Vector_table managed - * by RTEMS. - */ - -#define CPU_INTERRUPT_NUMBER_OF_VECTORS 32 -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) - -/* - * Should be large enough to run all RTEMS tests. This insures - * that a "reasonable" small application should not have any problems. - */ - -#define CPU_STACK_MINIMUM_SIZE (1024*4) - -/* - * CPU's worst alignment requirement for data types on a byte boundary. This - * alignment does not take into account the requirements for the stack. - */ - -#define CPU_ALIGNMENT 8 - -/* - * This number corresponds to the byte alignment requirement for the - * heap handler. This alignment requirement may be stricter than that - * for the data types alignment specified by CPU_ALIGNMENT. It is - * common for the heap to follow the same alignment requirement as - * CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict enough for the heap, - * then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for memory - * buffers allocated by the partition manager. This alignment requirement - * may be stricter than that for the data types alignment specified by - * CPU_ALIGNMENT. It is common for the partition to follow the same - * alignment requirement as CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict - * enough for the partition, then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for the - * stack. This alignment requirement may be stricter than that for the - * data types alignment specified by CPU_ALIGNMENT. If the CPU_ALIGNMENT - * is strict enough for the stack, then this should be set to 0. - * - * NOTE: This must be a power of 2 either 0 or greater than CPU_ALIGNMENT. - */ - -#define CPU_STACK_ALIGNMENT 0 - -/* ISR handler macros */ - -/* - * Disable all interrupts for an RTEMS critical section. The previous - * level is returned in _level. - */ - -#define _CPU_ISR_Disable( _isr_cookie ) \ - { \ - (_isr_cookie) = 0; /* do something to prevent warnings */ \ - } - -/* - * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). - * This indicates the end of an RTEMS critical section. The parameter - * _level is not modified. - */ - -#define _CPU_ISR_Enable( _isr_cookie ) \ - { \ - } - -/* - * This temporarily restores the interrupt to _level before immediately - * disabling them again. This is used to divide long RTEMS critical - * sections into two or more parts. The parameter _level is not - * modified. - */ - -#define _CPU_ISR_Flash( _isr_cookie ) \ - { \ - } - -/* - * Map interrupt level in task mode onto the hardware that the CPU - * actually provides. Currently, interrupt levels which do not - * map onto the CPU in a generic fashion are undefined. Someday, - * it would be nice if these were "mapped" by the application - * via a callout. For example, m68k has 8 levels 0 - 7, levels - * 8 - 255 would be available for bsp/application specific meaning. - * This could be used to manage a programmable interrupt controller - * via the rtems_task_mode directive. - * - * The get routine usually must be implemented as a subroutine. - */ - -#define _CPU_ISR_Set_level( new_level ) \ - { \ - } - -unsigned32 _CPU_ISR_Get_level( void ); - -/* end of ISR handler macros */ - -/* Context handler macros */ - -/* - * Initialize the context to a state suitable for starting a - * task after a context restore operation. Generally, this - * involves: - * - * - setting a starting address - * - preparing the stack - * - preparing the stack and frame pointers - * - setting the proper interrupt level in the context - * - initializing the floating point context - * - * This routine generally does not set any unnecessary register - * in the context. The state of the "general data" registers is - * undefined at task start time. - * - * NOTE: This is_fp parameter is TRUE if the thread is to be a floating - * point thread. This is typically only used on CPUs where the - * FPU may be easily disabled by software such as on the SPARC - * where the PSR contains an enable FPU bit. - */ - -#define _CPU_Context_Initialize( _the_context, _stack_base, _size, \ - _isr, _entry_point, _is_fp ) \ - { \ - } - -/* - * This routine is responsible for somehow restarting the currently - * executing task. If you are lucky, then all that is necessary - * is restoring the context. Otherwise, there will need to be - * a special assembly routine which does something special in this - * case. Context_Restore should work most of the time. It will - * not work if restarting self conflicts with the stack frame - * assumptions of restoring a context. - */ - -#define _CPU_Context_Restart_self( _the_context ) \ - _CPU_Context_restore( (_the_context) ); - -/* - * The purpose of this macro is to allow the initial pointer into - * a floating point context area (used to save the floating point - * context) to be at an arbitrary place in the floating point - * context area. - * - * This is necessary because some FP units are designed to have - * their context saved as a stack which grows into lower addresses. - * Other FP units can be saved by simply moving registers into offsets - * from the base of the context area. Finally some FP units provide - * a "dump context" instruction which could fill in from high to low - * or low to high based on the whim of the CPU designers. - */ - -#define _CPU_Context_Fp_start( _base, _offset ) \ - ( (void *) _Addresses_Add_offset( (_base), (_offset) ) ) - -/* - * This routine initializes the FP context area passed to it to. - * There are a few standard ways in which to initialize the - * floating point context. The code included for this macro assumes - * that this is a CPU in which a "initial" FP context was saved into - * _CPU_Null_fp_context and it simply copies it to the destination - * context passed to it. - * - * Other models include (1) not doing anything, and (2) putting - * a "null FP status word" in the correct place in the FP context. - */ - -#define _CPU_Context_Initialize_fp( _destination ) \ - { \ - *((Context_Control_fp *) *((void **) _destination)) = _CPU_Null_fp_context; \ - } - -/* end of Context handler macros */ - -/* Fatal Error manager macros */ - -/* - * This routine copies _error into a known place -- typically a stack - * location or a register, optionally disables interrupts, and - * halts/stops the CPU. - */ - -#define _CPU_Fatal_halt( _error ) \ - { \ - } - -/* end of Fatal Error manager macros */ - -/* Bitfield handler macros */ - -/* - * This routine sets _output to the bit number of the first bit - * set in _value. _value is of CPU dependent type Priority_Bit_map_control. - * This type may be either 16 or 32 bits wide although only the 16 - * least significant bits will be used. - * - * There are a number of variables in using a "find first bit" type - * instruction. - * - * (1) What happens when run on a value of zero? - * (2) Bits may be numbered from MSB to LSB or vice-versa. - * (3) The numbering may be zero or one based. - * (4) The "find first bit" instruction may search from MSB or LSB. - * - * RTEMS guarantees that (1) will never happen so it is not a concern. - * (2),(3), (4) are handled by the macros _CPU_Priority_mask() and - * _CPU_Priority_bits_index(). These three form a set of routines - * which must logically operate together. Bits in the _value are - * set and cleared based on masks built by _CPU_Priority_mask(). - * The basic major and minor values calculated by _Priority_Major() - * and _Priority_Minor() are "massaged" by _CPU_Priority_bits_index() - * to properly range between the values returned by the "find first bit" - * instruction. This makes it possible for _Priority_Get_highest() to - * calculate the major and directly index into the minor table. - * This mapping is necessary to ensure that 0 (a high priority major/minor) - * is the first bit found. - * - * This entire "find first bit" and mapping process depends heavily - * on the manner in which a priority is broken into a major and minor - * components with the major being the 4 MSB of a priority and minor - * the 4 LSB. Thus (0 << 4) + 0 corresponds to priority 0 -- the highest - * priority. And (15 << 4) + 14 corresponds to priority 254 -- the next - * to the lowest priority. - * - * If your CPU does not have a "find first bit" instruction, then - * there are ways to make do without it. Here are a handful of ways - * to implement this in software: - * - * - a series of 16 bit test instructions - * - a "binary search using if's" - * - _number = 0 - * if _value > 0x00ff - * _value >>=8 - * _number = 8; - * - * if _value > 0x0000f - * _value >=8 - * _number += 4 - * - * _number += bit_set_table[ _value ] - * - * where bit_set_table[ 16 ] has values which indicate the first - * bit set - */ - -#define CPU_USE_GENERIC_BITFIELD_CODE TRUE -#define CPU_USE_GENERIC_BITFIELD_DATA TRUE - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - { \ - (_output) = 0; /* do something to prevent warnings */ \ - } - -#endif - -/* end of Bitfield handler macros */ - -/* - * This routine builds the mask which corresponds to the bit fields - * as searched by _CPU_Bitfield_Find_first_bit(). See the discussion - * for that routine. - */ - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Priority_Mask( _bit_number ) \ - ( 1 << (_bit_number) ) - -#endif - -/* - * This routine translates the bit numbers returned by - * _CPU_Bitfield_Find_first_bit() into something suitable for use as - * a major or minor component of a priority. See the discussion - * for that routine. - */ - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Priority_bits_index( _priority ) \ - (_priority) - -#endif - -/* end of Priority handler macros */ - -/* functions */ - -/* - * _CPU_Initialize - * - * This routine performs CPU dependent initialization. - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) -); - -/* - * _CPU_ISR_install_raw_handler - * - * This routine installs a "raw" interrupt handler directly into the - * processor's vector table. - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_ISR_install_vector - * - * This routine installs an interrupt vector. - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_Install_interrupt_stack - * - * This routine installs the hardware interrupt stack pointer. - * - * NOTE: It need only be provided if CPU_HAS_HARDWARE_INTERRUPT_STACK - * is TRUE. - */ - -void _CPU_Install_interrupt_stack( void ); - -/* - * _CPU_Thread_Idle_body - * - * This routine is the CPU dependent IDLE thread body. - * - * NOTE: It need only be provided if CPU_PROVIDES_IDLE_THREAD_BODY - * is TRUE. - */ - -void _CPU_Thread_Idle_body( void ); - -/* - * _CPU_Context_switch - * - * This routine switches from the run context to the heir context. - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/* - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner. It may simply be a label in _CPU_Context_switch. - * - * NOTE: May be unnecessary to reload some registers. - */ - -void _CPU_Context_restore( - Context_Control *new_context -); - -/* - * _CPU_Context_save_fp - * - * This routine saves the floating point context passed to it. - */ - -void _CPU_Context_save_fp( - void **fp_context_ptr -); - -/* - * _CPU_Context_restore_fp - * - * This routine restores the floating point context passed to it. - */ - -void _CPU_Context_restore_fp( - void **fp_context_ptr -); - -/* The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. - * - * This version will work on any processor, but if there is a better - * way for your CPU PLEASE use it. The most common way to do this is to: - * - * swap least significant two bytes with 16-bit rotate - * swap upper and lower 16-bits - * swap most significant two bytes with 16-bit rotate - * - * Some CPUs have special instructions which swap a 32-bit quantity in - * a single instruction (e.g. i486). It is probably best to avoid - * an "endian swapping control bit" in the CPU. One good reason is - * that interrupts would probably have to be disabled to insure that - * an interrupt does not try to access the same "chunk" with the wrong - * endian. Another good reason is that on some CPUs, the endian bit - * endianness for ALL fetches -- both code and data -- so the code - * will be fetched incorrectly. - */ - -static inline unsigned int CPU_swap_u32( - unsigned int value -) -{ - unsigned32 byte1, byte2, byte3, byte4, swapped; - - byte4 = (value >> 24) & 0xff; - byte3 = (value >> 16) & 0xff; - byte2 = (value >> 8) & 0xff; - byte1 = value & 0xff; - - swapped = (byte1 << 24) | (byte2 << 16) | (byte3 << 8) | byte4; - return( swapped ); -} - -#define CPU_swap_u16( value ) \ - (((value&0xff) << 8) | ((value >> 8)&0xff)) - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/c/src/exec/score/cpu/no_cpu/cpu_asm.c b/c/src/exec/score/cpu/no_cpu/cpu_asm.c deleted file mode 100644 index d6abcab5c2..0000000000 --- a/c/src/exec/score/cpu/no_cpu/cpu_asm.c +++ /dev/null @@ -1,165 +0,0 @@ -/* cpu_asm.c ===> cpu_asm.S or cpu_asm.s - * - * This file contains the basic algorithms for all assembly code used - * in an specific CPU port of RTEMS. These algorithms must be implemented - * in assembly language - * - * NOTE: This is supposed to be a .S or .s file NOT a C file. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -/* - * This is supposed to be an assembly file. This means that system.h - * and cpu.h should not be included in a "real" cpu_asm file. An - * implementation in assembly should include "cpu_asm.h> - */ - -#include <rtems/system.h> -#include <rtems/score/cpu.h> -/* #include "cpu_asm.h> */ - -/* - * _CPU_Context_save_fp_context - * - * This routine is responsible for saving the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * Sometimes a macro implementation of this is in cpu.h which dereferences - * the ** and a similarly named routine in this file is passed something - * like a (Context_Control_fp *). The general rule on making this decision - * is to avoid writing assembly language. - */ - -void _CPU_Context_save_fp( - void **fp_context_ptr -) -{ -} - -/* - * _CPU_Context_restore_fp_context - * - * This routine is responsible for restoring the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * Sometimes a macro implementation of this is in cpu.h which dereferences - * the ** and a similarly named routine in this file is passed something - * like a (Context_Control_fp *). The general rule on making this decision - * is to avoid writing assembly language. - */ - -void _CPU_Context_restore_fp( - void **fp_context_ptr -) -{ -} - -/* _CPU_Context_switch - * - * This routine performs a normal non-FP context switch. - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -) -{ -} - -/* - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner. It may simply be a label in _CPU_Context_switch. - * - * NOTE: May be unnecessary to reload some registers. - */ - -void _CPU_Context_restore( - Context_Control *new_context -) -{ -} - -/* void __ISR_Handler() - * - * This routine provides the RTEMS interrupt management. - * - */ - -void _ISR_Handler() -{ - /* - * This discussion ignores a lot of the ugly details in a real - * implementation such as saving enough registers/state to be - * able to do something real. Keep in mind that the goal is - * to invoke a user's ISR handler which is written in C and - * uses a certain set of registers. - * - * Also note that the exact order is to a large extent flexible. - * Hardware will dictate a sequence for a certain subset of - * _ISR_Handler while requirements for setting - */ - - /* - * At entry to "common" _ISR_Handler, the vector number must be - * available. On some CPUs the hardware puts either the vector - * number or the offset into the vector table for this ISR in a - * known place. If the hardware does not give us this information, - * then the assembly portion of RTEMS for this port will contain - * a set of distinct interrupt entry points which somehow place - * the vector number in a known place (which is safe if another - * interrupt nests this one) and branches to _ISR_Handler. - * - * save some or all context on stack - * may need to save some special interrupt information for exit - * - * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) - * if ( _ISR_Nest_level == 0 ) - * switch to software interrupt stack - * #endif - * - * _ISR_Nest_level++; - * - * _Thread_Dispatch_disable_level++; - * - * (*_ISR_Vector_table[ vector ])( vector ); - * - * --_ISR_Nest_level; - * - * if ( _ISR_Nest_level ) - * goto the label "exit interrupt (simple case)" - * - * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) - * restore stack - * #endif - * - * if ( !_Context_Switch_necessary ) - * goto the label "exit interrupt (simple case)" - * - * if ( !_ISR_Signals_to_thread_executing ) - * _ISR_Signals_to_thread_executing = FALSE; - * goto the label "exit interrupt (simple case)" - * - * call _Thread_Dispatch() or prepare to return to _ISR_Dispatch - * - * prepare to get out of interrupt - * return from interrupt (maybe to _ISR_Dispatch) - * - * LABEL "exit interrupt (simple case): - * prepare to get out of interrupt - * return from interrupt - */ -} - diff --git a/c/src/exec/score/cpu/no_cpu/cpu_asm.h b/c/src/exec/score/cpu/no_cpu/cpu_asm.h deleted file mode 100644 index ed58c331bc..0000000000 --- a/c/src/exec/score/cpu/no_cpu/cpu_asm.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * cpu_asm.h - * - * Very loose template for an include file for the cpu_asm.? file - * if it is implemented as a ".S" file (preprocessed by cpp) instead - * of a ".s" file (preprocessed by gm4 or gasp). - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - * - */ - -#ifndef __CPU_ASM_h -#define __CPU_ASM_h - -/* pull in the generated offsets */ - -#include <rtems/score/offsets.h> - -/* - * Hardware General Registers - */ - -/* put something here */ - -/* - * Hardware Floating Point Registers - */ - -/* put something here */ - -/* - * Hardware Control Registers - */ - -/* put something here */ - -/* - * Calling Convention - */ - -/* put something here */ - -/* - * Temporary registers - */ - -/* put something here */ - -/* - * Floating Point Registers - SW Conventions - */ - -/* put something here */ - -/* - * Temporary floating point registers - */ - -/* put something here */ - -#endif - -/* end of file */ diff --git a/c/src/exec/score/cpu/no_cpu/no_cpu.h b/c/src/exec/score/cpu/no_cpu/no_cpu.h deleted file mode 100644 index a6df61a908..0000000000 --- a/c/src/exec/score/cpu/no_cpu/no_cpu.h +++ /dev/null @@ -1,56 +0,0 @@ -/* no_cpu.h - * - * This file is an example (i.e. "no CPU") of the file which is - * created for each CPU family port of RTEMS. - * - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - * - */ - -#ifndef _INCLUDE_NO_CPU_h -#define _INCLUDE_NO_CPU_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This file contains the information required to build - * RTEMS for a particular member of the "no cpu" - * family when executing in protected mode. It does - * this by setting variables to indicate which implementation - * dependent features are present in a particular member - * of the family. - */ - -#if defined(no_cpu) - -#define CPU_MODEL_NAME "no_cpu" -#define NOCPU_HAS_FPU 1 - -#else - -#error "Unsupported CPU Model" - -#endif - -/* - * Define the name of the CPU family. - */ - -#define CPU_NAME "NO CPU" - -#ifdef __cplusplus -} -#endif - -#endif /* ! _INCLUDE_NO_CPU_h */ -/* end of include file */ diff --git a/c/src/exec/score/cpu/no_cpu/no_cputypes.h b/c/src/exec/score/cpu/no_cpu/no_cputypes.h deleted file mode 100644 index a195711342..0000000000 --- a/c/src/exec/score/cpu/no_cpu/no_cputypes.h +++ /dev/null @@ -1,57 +0,0 @@ -/* no_cputypes.h - * - * This include file contains type definitions pertaining to the Intel - * no_cpu processor family. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __NO_CPU_TYPES_h -#define __NO_CPU_TYPES_h - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section defines the basic types for this processor. - */ - -typedef unsigned char unsigned8; /* unsigned 8-bit integer */ -typedef unsigned short unsigned16; /* unsigned 16-bit integer */ -typedef unsigned int unsigned32; /* unsigned 32-bit integer */ -typedef unsigned long long unsigned64; /* unsigned 64-bit integer */ - -typedef unsigned16 Priority_Bit_map_control; - -typedef signed char signed8; /* 8-bit signed integer */ -typedef signed short signed16; /* 16-bit signed integer */ -typedef signed int signed32; /* 32-bit signed integer */ -typedef signed long long signed64; /* 64 bit signed integer */ - -typedef unsigned32 boolean; /* Boolean value */ - -typedef float single_precision; /* single precision float */ -typedef double double_precision; /* double precision float */ - -typedef void no_cpu_isr; -typedef void ( *no_cpu_isr_entry )( void ); - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/no_cpu/rtems.c b/c/src/exec/score/cpu/no_cpu/rtems.c deleted file mode 100644 index 7744c53dab..0000000000 --- a/c/src/exec/score/cpu/no_cpu/rtems.c +++ /dev/null @@ -1,45 +0,0 @@ -/* rtems.c ===> rtems.S or rtems.s - * - * This file contains the single entry point code for - * the XXX implementation of RTEMS. - * - * NOTE: This is supposed to be a .S or .s file NOT a C file. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -/* - * This is supposed to be an assembly file. This means that system.h - * and cpu.h should not be included in a "real" rtems file. - */ - -#include <rtems/system.h> -#include <rtems/score/cpu.h> -/* #include "asm.h> */ - -/* - * RTEMS - * - * This routine jumps to the directive indicated in the - * CPU defined register. This routine is used when RTEMS is - * linked by itself and placed in ROM. This routine is the - * first address in the ROM space for RTEMS. The user "calls" - * this address with the directive arguments in the normal place. - * This routine then jumps indirectly to the correct directive - * preserving the arguments. The directive should not realize - * it has been "wrapped" in this way. The table "_Entry_points" - * is used to look up the directive. - */ - -void RTEMS() -{ -} - diff --git a/c/src/exec/score/cpu/powerpc/Makefile.in b/c/src/exec/score/cpu/powerpc/Makefile.in deleted file mode 100644 index f5f7ca5b92..0000000000 --- a/c/src/exec/score/cpu/powerpc/Makefile.in +++ /dev/null @@ -1,86 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - -RELS=$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -# Normally cpu_asm and rtems are assembly files -C_PIECES=cpu -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) - -H_FILES=$(srcdir)/cpu.h $(srcdir)/ppc.h $(srcdir)/ppctypes.h - -# H_FILES that get installed externally -EXTERNAL_H_FILES = $(srcdir)/asm.h - -# Assembly source names, if any, go here -- minus the .s -# Normally cpu_asm and rtems are assembly files -S_PIECES=cpu_asm rtems -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) - -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(RELS) - -$(ARCH)/rtems-cpu.rel: $(OBJS) - $(make-rel) - -$(ARCH)/cpu_asm.o: irq_stub.s - -# Install the program(s), appending _g or _p as appropriate. -# for include files, just use $(INSTALL) -install: all - -preinstall: $(ARCH) \ - $(PROJECT_INCLUDE)/rtems/score/targopts.h \ - ${PROJECT_RELEASE}/lib/bsp_specs - $(INSTALL) -m 444 ${H_FILES} $(PROJECT_INCLUDE)/rtems/score -# we will share the basic cpu file - $(INSTALL) -m 444 ${EXTERNAL_H_FILES} $(PROJECT_INCLUDE) -# make a link in case we are not compiling in the source directory - test -f irq_stub.s || $(LN) -s $(srcdir)/irq_stub.s irq_stub.s - -$(PROJECT_INCLUDE)/rtems/score/targopts.h: $(ARCH)/targopts.h-tmp - $(INSTALL) -m 444 $(ARCH)/targopts.h-tmp $@ - -# $(ARCH)/targopts.h-tmp rule is in leaf.cfg - -${PROJECT_RELEASE}/lib/bsp_specs: $(ARCH)/bsp_specs.tmp - $(INSTALL) -m 444 $(ARCH)/bsp_specs.tmp $@ - -# $(ARCH)/bsp_specs.tmp rule is in leaf.cfg diff --git a/c/src/exec/score/cpu/powerpc/README b/c/src/exec/score/cpu/powerpc/README deleted file mode 100644 index 0b87ac1ea7..0000000000 --- a/c/src/exec/score/cpu/powerpc/README +++ /dev/null @@ -1,78 +0,0 @@ -# -# $Id$ -# - -There are various issues regarding this port: - - - -1) Legal - -This port is written by Andrew Bray <andy@i-cubed.co.uk>, and -is copyright 1995 i-cubed ltd. - -This port was later updated by Joel Sherrill <joel@OARcorp.com> -to test the support for the PPC603, PPC603e, and PPC604. This -was tested on the PowerPC simulator PSIM and a VMEbus single board -computer. - -2) CPU support. - -This release fully supports the PPC403GA, PPC403GB, PPC603, PPC603e, -and PPC604 processors. A good faith attempt has been made to include -support other models based upon available documentation. - -This port was originally written and tested on the PPC403GA (using -software floating point). Current ports are tested on 60x CPUs -using the PowerPC simulator PSIM. - -Andrew Bray received assistance during the initial porting effort -from IBM and Blue Micro and we would like to gratefully acknowledge -that help. - -The support for the PPC602 processor is incomplete as only sketchy -data is currently available. Perhaps this model has been dropped. - - - -3) Application Binary INterface - -In the context of RTEMS, the ABI is of interest for the following -aspects: - -a) Register usage. Which registers are used to provide static variable - linkage, stack pointer etc. - -b) Function calling convention. How parameters are passed, how function - variables should be invoked, how values are returned, etc. - -c) Stack frame layout. - -I am aware of a number of ABIs for the PowerPC: - -a) The PowerOpen ABI. This is the original Power ABI used on the RS/6000. - This is the only ABI supported by versions of GCC before 2.7.0. - -b) The SVR4 ABI. This is the ABI defined by SunSoft for the Solaris port - to the PowerPC. - -c) The Embedded ABI. This is an embedded ABI for PowerPC use, which has no - operating system interface defined. It is promoted by SunSoft, Motorola, - and Cygnus Support. Cygnus are porting the GNU toolchain to this ABI. - -d) GCC 2.7.0. This compiler is partway along the road to supporting the EABI, - but is currently halfway in between. - -This port was built and tested using the PowerOpen ABI, with the following -caveat: we used an ELF assembler and linker. So some attention may be -required on the assembler files to get them through a traditional (XCOFF) -PowerOpen assembler. - -This port contains support for the other ABIs, but this may prove to be -incomplete as it is untested. - -The RTEMS PowerPC port supports EABI as the primary ABI. The powerpc-rtems -GNU toolset configuration is EABI and . - -Andrew Bray, 4 December 1995 -Joel Sherrill, 16 July 1997 diff --git a/c/src/exec/score/cpu/powerpc/TODO b/c/src/exec/score/cpu/powerpc/TODO deleted file mode 100644 index 64c96cb14c..0000000000 --- a/c/src/exec/score/cpu/powerpc/TODO +++ /dev/null @@ -1,8 +0,0 @@ -# -# $Id$ -# - -Todo list: - -Maybe decode external interrupts like the HPPA does. - See c/src/lib/libcpu/powerpc/ppc403/ictrl/* for implementation on ppc403 diff --git a/c/src/exec/score/cpu/powerpc/cpu.c b/c/src/exec/score/cpu/powerpc/cpu.c deleted file mode 100644 index da6ecf4d19..0000000000 --- a/c/src/exec/score/cpu/powerpc/cpu.c +++ /dev/null @@ -1,651 +0,0 @@ -/* - * PowerPC CPU Dependent Source - * - * Author: Andrew Bray <andy@i-cubed.co.uk> - * - * COPYRIGHT (c) 1995 by i-cubed ltd. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of i-cubed limited not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * i-cubed limited makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/cpu/no_cpu/cpu.c: - * - * COPYRIGHT (c) 1989-1997. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be found in - * the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/score/isr.h> -#include <rtems/score/context.h> -#include <rtems/score/thread.h> -#include <rtems/score/interr.h> - -/* - * These are for testing purposes. - */ - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: - * cpu_table - CPU table to initialize - * thread_dispatch - address of disptaching routine - */ - -static void ppc_spurious(int, CPU_Interrupt_frame *); - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) /* ignored on this CPU */ -) -{ - proc_ptr handler = (proc_ptr)ppc_spurious; - int i; -#if (PPC_ABI != PPC_ABI_POWEROPEN) - register unsigned32 r2 = 0; -#if (PPC_ABI != PPC_ABI_GCC27) - register unsigned32 r13 = 0; - - asm ("mr %0,13" : "=r" ((r13)) : "0" ((r13))); - _CPU_IRQ_info.Default_r13 = r13; -#endif - - asm ("mr %0,2" : "=r" ((r2)) : "0" ((r2))); - _CPU_IRQ_info.Default_r2 = r2; -#endif - - _CPU_IRQ_info.Nest_level = &_ISR_Nest_level; - _CPU_IRQ_info.Disable_level = &_Thread_Dispatch_disable_level; - _CPU_IRQ_info.Vector_table = _ISR_Vector_table; -#if (PPC_ABI == PPC_ABI_POWEROPEN) - _CPU_IRQ_info.Dispatch_r2 = ((unsigned32 *)_Thread_Dispatch)[1]; -#endif - _CPU_IRQ_info.Switch_necessary = &_Context_Switch_necessary; - _CPU_IRQ_info.Signal = &_ISR_Signals_to_thread_executing; - -#if (PPC_USE_SPRG) - i = (int)&_CPU_IRQ_info; - asm volatile("mtspr 0x113, %0" : "=r" (i) : "0" (i)); /* SPRG 3 */ -#endif - - /* - * Store Msr Value in the IRQ info structure. - */ - _CPU_MSR_Value(_CPU_IRQ_info.msr_initial); - -#if (PPC_USE_SPRG) - i = _CPU_IRQ_info.msr_initial; - asm volatile("mtspr 0x112, %0" : "=r" (i) : "0" (i)); /* SPRG 2 */ -#endif - - if ( cpu_table->spurious_handler ) - handler = (proc_ptr)cpu_table->spurious_handler; - - for (i = 0; i < PPC_INTERRUPT_MAX; i++) - _ISR_Vector_table[i] = handler; - - _CPU_Table = *cpu_table; -} - -/*PAGE - * - * _CPU_ISR_Calculate_level - * - * The PowerPC puts its interrupt enable status in the MSR register - * which also contains things like endianness control. To be more - * awkward, the layout varies from processor to processor. This - * is why it was necessary to adopt a scheme which allowed the user - * to specify specifically which interrupt sources were enabled. - */ - -unsigned32 _CPU_ISR_Calculate_level( - unsigned32 new_level -) -{ - register unsigned32 new_msr = 0; - - /* - * Set the critical interrupt enable bit - */ - -#if (PPC_HAS_RFCI) - if ( !(new_level & PPC_INTERRUPT_LEVEL_CE) ) - new_msr |= PPC_MSR_CE; -#endif - - if ( !(new_level & PPC_INTERRUPT_LEVEL_ME) ) - new_msr |= PPC_MSR_ME; - - if ( !(new_level & PPC_INTERRUPT_LEVEL_EE) ) - new_msr |= PPC_MSR_EE; - - return new_msr; -} - -/*PAGE - * - * _CPU_ISR_Set_level - * - * This routine sets the requested level in the MSR. - */ - -void _CPU_ISR_Set_level( - unsigned32 new_level -) -{ - register unsigned32 tmp = 0; - register unsigned32 new_msr; - - new_msr = _CPU_ISR_Calculate_level( new_level ); - - asm volatile ( - "mfmsr %0; andc %0,%0,%1; and %2, %2, %1; or %0, %0, %2; mtmsr %0" : - "=&r" ((tmp)) : - "r" ((PPC_MSR_DISABLE_MASK)), "r" ((new_msr)), "0" ((tmp)) - ); -} - -/*PAGE - * - * _CPU_ISR_Get_level - * - * This routine gets the current interrupt level from the MSR and - * converts it to an RTEMS interrupt level. - */ - -unsigned32 _CPU_ISR_Get_level( void ) -{ - unsigned32 level = 0; - unsigned32 msr; - - asm volatile("mfmsr %0" : "=r" ((msr))); - - msr &= PPC_MSR_DISABLE_MASK; - - /* - * Set the critical interrupt enable bit - */ - -#if (PPC_HAS_RFCI) - if ( !(msr & PPC_MSR_CE) ) - level |= PPC_INTERRUPT_LEVEL_CE; -#endif - - if ( !(msr & PPC_MSR_ME) ) - level |= PPC_INTERRUPT_LEVEL_ME; - - if ( !(msr & PPC_MSR_EE) ) - level |= PPC_INTERRUPT_LEVEL_EE; - - return level; -} - -/*PAGE - * - * _CPU_Context_Initialize - */ - -#if (PPC_ABI == PPC_ABI_POWEROPEN) -#define CPU_MINIMUM_STACK_FRAME_SIZE 56 -#else /* PPC_ABI_SVR4 or PPC_ABI_EABI */ -#define CPU_MINIMUM_STACK_FRAME_SIZE 8 -#endif - -void _CPU_Context_Initialize( - Context_Control *the_context, - unsigned32 *stack_base, - unsigned32 size, - unsigned32 new_level, - void *entry_point, - boolean is_fp -) -{ - unsigned32 msr_value; - unsigned32 sp; - - sp = (unsigned32)stack_base + size - CPU_MINIMUM_STACK_FRAME_SIZE; - *((unsigned32 *)sp) = 0; - the_context->gpr1 = sp; - - the_context->msr = _CPU_ISR_Calculate_level( new_level ); - - /* - * The FP bit of the MSR should only be enabled if this is a floating - * point task. Unfortunately, the vfprintf_r routine in newlib - * ends up pushing a floating point register regardless of whether or - * not a floating point number is being printed. Serious restructuring - * of vfprintf.c will be required to avoid this behavior. At this - * time (7 July 1997), this restructuring is not being done. - */ - - /*if ( is_fp ) */ - the_context->msr |= PPC_MSR_FP; - - /* - * Calculate the task's MSR value: - * - * + Set the exception prefix bit to point to the exception table - * + Force the RI bit - * + Use the DR and IR bits - */ - _CPU_MSR_Value( msr_value ); - the_context->msr |= (msr_value & PPC_MSR_EP); - the_context->msr |= PPC_MSR_RI; - the_context->msr |= msr_value & (PPC_MSR_DR|PPC_MSR_IR); - -#if (PPC_ABI == PPC_ABI_POWEROPEN) - { unsigned32 *desc = (unsigned32 *)entry_point; - - the_context->pc = desc[0]; - the_context->gpr2 = desc[1]; - } -#endif - -#if (PPC_ABI == PPC_ABI_SVR4) - { unsigned r13 = 0; - asm volatile ("mr %0, 13" : "=r" ((r13))); - - the_context->pc = (unsigned32)entry_point; - the_context->gpr13 = r13; - } -#endif - -#if (PPC_ABI == PPC_ABI_EABI) - { unsigned32 r2 = 0; - unsigned r13 = 0; - asm volatile ("mr %0,2; mr %1,13" : "=r" ((r2)), "=r" ((r13))); - - the_context->pc = (unsigned32)entry_point; - the_context->gpr2 = r2; - the_context->gpr13 = r13; - } -#endif -} - - -/* _CPU_ISR_install_vector - * - * This kernel routine installs the RTEMS handler for the - * specified vector. - * - * Input parameters: - * vector - interrupt vector number - * old_handler - former ISR for this vector number - * new_handler - replacement ISR for this vector number - * - * Output parameters: NONE - * - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - proc_ptr ignored; - *old_handler = _ISR_Vector_table[ vector ]; - - /* - * If the interrupt vector table is a table of pointer to isr entry - * points, then we need to install the appropriate RTEMS interrupt - * handler for this vector number. - */ - - /* - * Install the wrapper so this ISR can be invoked properly. - */ - if (_CPU_Table.exceptions_in_RAM) - _CPU_ISR_install_raw_handler( vector, _ISR_Handler, &ignored ); - - /* - * We put the actual user ISR address in '_ISR_vector_table'. This will - * be used by the _ISR_Handler so the user gets control. - */ - - _ISR_Vector_table[ vector ] = new_handler ? (ISR_Handler_entry)new_handler : - _CPU_Table.spurious_handler ? - (ISR_Handler_entry)_CPU_Table.spurious_handler : - (ISR_Handler_entry)ppc_spurious; -} - -/*PAGE - * - * _CPU_Install_interrupt_stack - */ - -void _CPU_Install_interrupt_stack( void ) -{ -#if (PPC_ABI == PPC_ABI_POWEROPEN || PPC_ABI == PPC_ABI_GCC27) - _CPU_IRQ_info.Stack = _CPU_Interrupt_stack_high - 56; -#else - _CPU_IRQ_info.Stack = _CPU_Interrupt_stack_high - 8; -#endif -} - -/* Handle a spurious interrupt */ -static void ppc_spurious(int v, CPU_Interrupt_frame *i) -{ -#if 0 - printf("Spurious interrupt on vector %d from %08.8x\n", - v, i->pc); -#endif -#ifdef ppc403 - if (v == PPC_IRQ_EXTERNAL) - { - register int r = 0; - - asm volatile("mtdcr 0x42, %0" : - "=&r" ((r)) : "0" ((r))); /* EXIER */ - } - else if (v == PPC_IRQ_PIT) - { - register int r = 0x08000000; - - asm volatile("mtspr 0x3d8, %0" : - "=&r" ((r)) : "0" ((r))); /* TSR */ - } - else if (v == PPC_IRQ_FIT) - { - register int r = 0x04000000; - - asm volatile("mtspr 0x3d8, %0" : - "=&r" ((r)) : "0" ((r))); /* TSR */ - } -#endif -} - -void _CPU_Fatal_error(unsigned32 _error) -{ - asm volatile ("mr 3, %0" : : "r" ((_error))); - asm volatile ("tweq 5,5"); - asm volatile ("li 0,0; mtmsr 0"); - while (1) ; -} - -#define PPC_SYNCHRONOUS_TRAP_BIT_MASK 0x100 -#define PPC_ASYNCHRONOUS_TRAP( _trap ) (_trap) -#define PPC_SYNCHRONOUS_TRAP ( _trap ) ((_trap)+PPC_SYNCHRONOUS_TRAP_BIT_MASK) -#define PPC_REAL_TRAP_NUMBER ( _trap ) ((_trap)%PPC_SYNCHRONOUS_TRAP_BIT_MASK) - - -const CPU_Trap_table_entry _CPU_Trap_slot_template = { - -#if (PPC_ABI == PPC_ABI_POWEROPEN || PPC_ABI == PPC_ABI_GCC27) -#error " Vector install not tested." -#if (PPC_HAS_FPU) -#error " Vector install not tested." - 0x9421feb0, /* stwu r1, -(20*4 + 18*8 + IP_END)(r1) */ -#else -#error " Vector install not tested." - 0x9421ff40, /* stwu r1, -(20*4 + IP_END)(r1) */ -#endif -#else - 0x9421ff90, /* stwu r1, -(IP_END)(r1) */ -#endif - - 0x90010008, /* stw %r0, IP_0(%r1) */ - 0x38000000, /* li %r0, PPC_IRQ */ - 0x48000002 /* ba PROC (_ISR_Handler) */ -}; - -unsigned32 ppc_exception_vector_addr( - unsigned32 vector -); - - -/*PAGE - * - * _CPU_ISR_install_raw_handler - * - * This routine installs the specified handler as a "raw" non-executive - * supported trap handler (a.k.a. interrupt service routine). - * - * Input Parameters: - * vector - trap table entry number plus synchronous - * vs. asynchronous information - * new_handler - address of the handler to be installed - * old_handler - pointer to an address of the handler previously installed - * - * Output Parameters: NONE - * *new_handler - address of the handler previously installed - * - * NOTE: - * - * This routine is based on the SPARC routine _CPU_ISR_install_raw_handler. - * Install a software trap handler as an executive interrupt handler - * (which is desirable since RTEMS takes care of window and register issues), - * then the executive needs to know that the return address is to the trap - * rather than the instruction following the trap. - * - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - unsigned32 real_vector; - CPU_Trap_table_entry *slot; - unsigned32 u32_handler=0; - - /* - * Get the "real" trap number for this vector ignoring the synchronous - * versus asynchronous indicator included with our vector numbers. - */ - - real_vector = vector; - - /* - * Get the current base address of the trap table and calculate a pointer - * to the slot we are interested in. - */ - slot = (CPU_Trap_table_entry *)ppc_exception_vector_addr( real_vector ); - - /* - * Get the address of the old_handler from the trap table. - * - * NOTE: The old_handler returned will be bogus if it does not follow - * the RTEMS model. - */ - -#define HIGH_BITS_MASK 0xFFFFFC00 -#define HIGH_BITS_SHIFT 10 -#define LOW_BITS_MASK 0x000003FF - - if (slot->stwu_r1 == _CPU_Trap_slot_template.stwu_r1) { - /* - * Set u32_handler = to target address - */ - u32_handler = slot->b_Handler & 0x03fffffc; - - /* IMD FIX: sign extend address fragment... */ - if (u32_handler & 0x02000000) { - u32_handler |= 0xfc000000; - } - - *old_handler = (proc_ptr) u32_handler; - } else - *old_handler = 0; - - /* - * Copy the template to the slot and then fix it. - */ - *slot = _CPU_Trap_slot_template; - - u32_handler = (unsigned32) new_handler; - - /* - * IMD FIX: insert address fragment only (bits 6..29) - * therefore check for proper address range - * and remove unwanted bits - */ - if ((u32_handler & 0xfc000000) == 0xfc000000) { - u32_handler &= ~0xfc000000; - } - else if ((u32_handler & 0xfc000000) != 0x00000000) { - _Internal_error_Occurred(INTERNAL_ERROR_CORE, - TRUE, - u32_handler); - } - - slot->b_Handler |= u32_handler; - - slot->li_r0_IRQ |= vector; - - _CPU_Data_Cache_Block_Flush( slot ); -} - -unsigned32 ppc_exception_vector_addr( - unsigned32 vector -) -{ -#if (!PPC_HAS_EVPR) - unsigned32 Msr; -#endif - unsigned32 Top = 0; - unsigned32 Offset = 0x000; - -#if (PPC_HAS_EXCEPTION_PREFIX) - _CPU_MSR_Value ( Msr ); - if ( ( Msr & PPC_MSR_EP) != 0 ) /* Vectors at FFFx_xxxx */ - Top = 0xfff00000; -#elif (PPC_HAS_EVPR) - asm volatile( "mfspr %0,0x3d6" : "=r" (Top)); /* EVPR */ - Top = Top & 0xffff0000; -#endif - - switch ( vector ) { - case PPC_IRQ_SYSTEM_RESET: /* on 40x aka PPC_IRQ_CRIT */ - Offset = 0x00100; - break; - case PPC_IRQ_MCHECK: - Offset = 0x00200; - break; - case PPC_IRQ_PROTECT: - Offset = 0x00300; - break; - case PPC_IRQ_ISI: - Offset = 0x00400; - break; - case PPC_IRQ_EXTERNAL: - Offset = 0x00500; - break; - case PPC_IRQ_ALIGNMENT: - Offset = 0x00600; - break; - case PPC_IRQ_PROGRAM: - Offset = 0x00700; - break; - case PPC_IRQ_NOFP: - Offset = 0x00800; - break; - case PPC_IRQ_DECREMENTER: - Offset = 0x00900; - break; - case PPC_IRQ_RESERVED_A: - Offset = 0x00a00; - break; - case PPC_IRQ_RESERVED_B: - Offset = 0x00b00; - break; - case PPC_IRQ_SCALL: - Offset = 0x00c00; - break; - case PPC_IRQ_TRACE: - Offset = 0x00d00; - break; - case PPC_IRQ_FP_ASST: - Offset = 0x00e00; - break; - -#if defined(ppc403) - -/* PPC_IRQ_CRIT is the same vector as PPC_IRQ_RESET - case PPC_IRQ_CRIT: - Offset = 0x00100; - break; -*/ - case PPC_IRQ_PIT: - Offset = 0x01000; - break; - case PPC_IRQ_FIT: - Offset = 0x01010; - break; - case PPC_IRQ_WATCHDOG: - Offset = 0x01020; - break; - case PPC_IRQ_DEBUG: - Offset = 0x02000; - break; - -#elif defined(ppc601) - case PPC_IRQ_TRACE: - Offset = 0x02000; - break; - -#elif defined(ppc603) - case PPC_IRQ_TRANS_MISS: - Offset = 0x1000; - break; - case PPC_IRQ_DATA_LOAD: - Offset = 0x1100; - break; - case PPC_IRQ_DATA_STORE: - Offset = 0x1200; - break; - case PPC_IRQ_ADDR_BRK: - Offset = 0x1300; - break; - case PPC_IRQ_SYS_MGT: - Offset = 0x1400; - break; - -#elif defined(ppc603e) - case PPC_TLB_INST_MISS: - Offset = 0x1000; - break; - case PPC_TLB_LOAD_MISS: - Offset = 0x1100; - break; - case PPC_TLB_STORE_MISS: - Offset = 0x1200; - break; - case PPC_IRQ_ADDRBRK: - Offset = 0x1300; - break; - case PPC_IRQ_SYS_MGT: - Offset = 0x1400; - break; - -#elif defined(ppc604) - case PPC_IRQ_ADDR_BRK: - Offset = 0x1300; - break; - case PPC_IRQ_SYS_MGT: - Offset = 0x1400; - break; -#endif - - } - Top += Offset; - return Top; -} - diff --git a/c/src/exec/score/cpu/powerpc/cpu.h b/c/src/exec/score/cpu/powerpc/cpu.h deleted file mode 100644 index 1240f68451..0000000000 --- a/c/src/exec/score/cpu/powerpc/cpu.h +++ /dev/null @@ -1,1143 +0,0 @@ -/* cpu.h - * - * This include file contains information pertaining to the PowerPC - * processor. - * - * Author: Andrew Bray <andy@i-cubed.co.uk> - * - * COPYRIGHT (c) 1995 by i-cubed ltd. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of i-cubed limited not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * i-cubed limited makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/cpu/no_cpu/cpu.h: - * - * COPYRIGHT (c) 1989-1997. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may in - * the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __CPU_h -#define __CPU_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/score/ppc.h> /* pick up machine definitions */ -#ifndef ASM -struct CPU_Interrupt_frame; - -#include <rtems/score/ppctypes.h> -#endif - -/* conditional compilation parameters */ - -/* - * Should the calls to _Thread_Enable_dispatch be inlined? - * - * If TRUE, then they are inlined. - * If FALSE, then a subroutine call is made. - * - * Basically this is an example of the classic trade-off of size - * versus speed. Inlining the call (TRUE) typically increases the - * size of RTEMS while speeding up the enabling of dispatching. - * [NOTE: In general, the _Thread_Dispatch_disable_level will - * only be 0 or 1 unless you are in an interrupt handler and that - * interrupt handler invokes the executive.] When not inlined - * something calls _Thread_Enable_dispatch which in turns calls - * _Thread_Dispatch. If the enable dispatch is inlined, then - * one subroutine call is avoided entirely.] - */ - -#define CPU_INLINE_ENABLE_DISPATCH FALSE - -/* - * Should the body of the search loops in _Thread_queue_Enqueue_priority - * be unrolled one time? In unrolled each iteration of the loop examines - * two "nodes" on the chain being searched. Otherwise, only one node - * is examined per iteration. - * - * If TRUE, then the loops are unrolled. - * If FALSE, then the loops are not unrolled. - * - * The primary factor in making this decision is the cost of disabling - * and enabling interrupts (_ISR_Flash) versus the cost of rest of the - * body of the loop. On some CPUs, the flash is more expensive than - * one iteration of the loop body. In this case, it might be desirable - * to unroll the loop. It is important to note that on some CPUs, this - * code is the longest interrupt disable period in RTEMS. So it is - * necessary to strike a balance when setting this parameter. - */ - -#define CPU_UNROLL_ENQUEUE_PRIORITY FALSE - -/* - * Does RTEMS manage a dedicated interrupt stack in software? - * - * If TRUE, then a stack is allocated in _Interrupt_Manager_initialization. - * If FALSE, nothing is done. - * - * If the CPU supports a dedicated interrupt stack in hardware, - * then it is generally the responsibility of the BSP to allocate it - * and set it up. - * - * If the CPU does not support a dedicated interrupt stack, then - * the porter has two options: (1) execute interrupts on the - * stack of the interrupted task, and (2) have RTEMS manage a dedicated - * interrupt stack. - * - * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - */ - -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK FALSE - -/* - * Does this CPU have hardware support for a dedicated interrupt stack? - * - * If TRUE, then it must be installed during initialization. - * If FALSE, then no installation is performed. - * - * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - */ - -/* - * ACB: This is a lie, but it gets us a handle on a call to set up - * a variable derived from the top of the interrupt stack. - */ - -#define CPU_HAS_HARDWARE_INTERRUPT_STACK TRUE - -/* - * Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager? - * - * If TRUE, then the memory is allocated during initialization. - * If FALSE, then the memory is allocated during initialization. - * - * This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE - * or CPU_INSTALL_HARDWARE_INTERRUPT_STACK is TRUE. - */ - -#define CPU_ALLOCATE_INTERRUPT_STACK TRUE - -/* - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? - */ - -#define CPU_ISR_PASSES_FRAME_POINTER 1 - -/* - * Does the CPU have hardware floating point? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored. - * - * If there is a FP coprocessor such as the i387 or mc68881, then - * the answer is TRUE. - * - * The macro name "PPC_HAS_FPU" should be made CPU specific. - * It indicates whether or not this CPU model has FP support. For - * example, it would be possible to have an i386_nofp CPU model - * which set this to false to indicate that you have an i386 without - * an i387 and wish to leave floating point support out of RTEMS. - */ - -#if ( PPC_HAS_FPU == 1 ) -#define CPU_HARDWARE_FP TRUE -#else -#define CPU_HARDWARE_FP FALSE -#endif - -/* - * Are all tasks RTEMS_FLOATING_POINT tasks implicitly? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed. - * - * So far, the only CPU in which this option has been used is the - * HP PA-RISC. The HP C compiler and gcc both implicitly use the - * floating point registers to perform integer multiplies. If - * a function which you would not think utilize the FP unit DOES, - * then one can not easily predict which tasks will use the FP hardware. - * In this case, this option should be TRUE. - * - * If CPU_HARDWARE_FP is FALSE, then this should be FALSE as well. - */ - -#define CPU_ALL_TASKS_ARE_FP FALSE - -/* - * Should the IDLE task have a floating point context? - * - * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task - * and it has a floating point context which is switched in and out. - * If FALSE, then the IDLE task does not have a floating point context. - * - * Setting this to TRUE negatively impacts the time required to preempt - * the IDLE task from an interrupt because the floating point context - * must be saved as part of the preemption. - */ - -#define CPU_IDLE_TASK_IS_FP FALSE - -/* - * Should the saving of the floating point registers be deferred - * until a context switch is made to another different floating point - * task? - * - * If TRUE, then the floating point context will not be stored until - * necessary. It will remain in the floating point registers and not - * disturned until another floating point task is switched to. - * - * If FALSE, then the floating point context is saved when a floating - * point task is switched out and restored when the next floating point - * task is restored. The state of the floating point registers between - * those two operations is not specified. - * - * If the floating point context does NOT have to be saved as part of - * interrupt dispatching, then it should be safe to set this to TRUE. - * - * Setting this flag to TRUE results in using a different algorithm - * for deciding when to save and restore the floating point context. - * The deferred FP switch algorithm minimizes the number of times - * the FP context is saved and restored. The FP context is not saved - * until a context switch is made to another, different FP task. - * Thus in a system with only one FP task, the FP context will never - * be saved or restored. - */ -/* - * ACB Note: This could make debugging tricky.. - */ - -#define CPU_USE_DEFERRED_FP_SWITCH TRUE - -/* - * Does this port provide a CPU dependent IDLE task implementation? - * - * If TRUE, then the routine _CPU_Thread_Idle_body - * must be provided and is the default IDLE thread body instead of - * _CPU_Thread_Idle_body. - * - * If FALSE, then use the generic IDLE thread body if the BSP does - * not provide one. - * - * This is intended to allow for supporting processors which have - * a low power or idle mode. When the IDLE thread is executed, then - * the CPU can be powered down. - * - * The order of precedence for selecting the IDLE thread body is: - * - * 1. BSP provided - * 2. CPU dependent (if provided) - * 3. generic (if no BSP and no CPU dependent) - */ - -#define CPU_PROVIDES_IDLE_THREAD_BODY FALSE - -/* - * Does the stack grow up (toward higher addresses) or down - * (toward lower addresses)? - * - * If TRUE, then the grows upward. - * If FALSE, then the grows toward smaller addresses. - */ - -#define CPU_STACK_GROWS_UP FALSE - -/* - * The following is the variable attribute used to force alignment - * of critical RTEMS structures. On some processors it may make - * sense to have these aligned on tighter boundaries than - * the minimum requirements of the compiler in order to have as - * much of the critical data area as possible in a cache line. - * - * The placement of this macro in the declaration of the variables - * is based on the syntactically requirements of the GNU C - * "__attribute__" extension. For example with GNU C, use - * the following to force a structures to a 32 byte boundary. - * - * __attribute__ ((aligned (32))) - * - * NOTE: Currently only the Priority Bit Map table uses this feature. - * To benefit from using this, the data must be heavily - * used so it will stay in the cache and used frequently enough - * in the executive to justify turning this on. - */ - -#define CPU_STRUCTURE_ALIGNMENT \ - __attribute__ ((aligned (PPC_CACHE_ALIGNMENT))) - -/* - * Define what is required to specify how the network to host conversion - * routines are handled. - */ - -#define CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE -#define CPU_BIG_ENDIAN TRUE -#define CPU_LITTLE_ENDIAN FALSE - -/* - * The following defines the number of bits actually used in the - * interrupt field of the task mode. How those bits map to the - * CPU interrupt levels is defined by the routine _CPU_ISR_Set_level(). - * - * The interrupt level is bit mapped for the PowerPC family. The - * bits are set to 0 to indicate that a particular exception source - * enabled and 1 if it is disabled. This keeps with RTEMS convention - * that interrupt level 0 means all sources are enabled. - * - * The bits are assigned to correspond to enable bits in the MSR. - */ - -#define PPC_INTERRUPT_LEVEL_ME 0x01 -#define PPC_INTERRUPT_LEVEL_EE 0x02 -#define PPC_INTERRUPT_LEVEL_CE 0x04 - -/* XXX should these be maskable? */ -#if 0 -#define PPC_INTERRUPT_LEVEL_DE 0x08 -#define PPC_INTERRUPT_LEVEL_BE 0x10 -#define PPC_INTERRUPT_LEVEL_SE 0x20 -#endif - -#define CPU_MODES_INTERRUPT_MASK 0x00000007 - -/* - * Processor defined structures - * - * Examples structures include the descriptor tables from the i386 - * and the processor control structure on the i960ca. - */ - -/* may need to put some structures here. */ - -/* - * Contexts - * - * Generally there are 2 types of context to save. - * 1. Interrupt registers to save - * 2. Task level registers to save - * - * This means we have the following 3 context items: - * 1. task level context stuff:: Context_Control - * 2. floating point task stuff:: Context_Control_fp - * 3. special interrupt level context :: Context_Control_interrupt - * - * On some processors, it is cost-effective to save only the callee - * preserved registers during a task context switch. This means - * that the ISR code needs to save those registers which do not - * persist across function calls. It is not mandatory to make this - * distinctions between the caller/callee saves registers for the - * purpose of minimizing context saved during task switch and on interrupts. - * If the cost of saving extra registers is minimal, simplicity is the - * choice. Save the same context on interrupt entry as for tasks in - * this case. - * - * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then - * care should be used in designing the context area. - * - * On some CPUs with hardware floating point support, the Context_Control_fp - * structure will not be used or it simply consist of an array of a - * fixed number of bytes. This is done when the floating point context - * is dumped by a "FP save context" type instruction and the format - * is not really defined by the CPU. In this case, there is no need - * to figure out the exact format -- only the size. Of course, although - * this is enough information for RTEMS, it is probably not enough for - * a debugger such as gdb. But that is another problem. - */ - -typedef struct { - unsigned32 gpr1; /* Stack pointer for all */ - unsigned32 gpr2; /* TOC in PowerOpen, reserved SVR4, section ptr EABI + */ - unsigned32 gpr13; /* First non volatile PowerOpen, section ptr SVR4/EABI */ - unsigned32 gpr14; /* Non volatile for all */ - unsigned32 gpr15; /* Non volatile for all */ - unsigned32 gpr16; /* Non volatile for all */ - unsigned32 gpr17; /* Non volatile for all */ - unsigned32 gpr18; /* Non volatile for all */ - unsigned32 gpr19; /* Non volatile for all */ - unsigned32 gpr20; /* Non volatile for all */ - unsigned32 gpr21; /* Non volatile for all */ - unsigned32 gpr22; /* Non volatile for all */ - unsigned32 gpr23; /* Non volatile for all */ - unsigned32 gpr24; /* Non volatile for all */ - unsigned32 gpr25; /* Non volatile for all */ - unsigned32 gpr26; /* Non volatile for all */ - unsigned32 gpr27; /* Non volatile for all */ - unsigned32 gpr28; /* Non volatile for all */ - unsigned32 gpr29; /* Non volatile for all */ - unsigned32 gpr30; /* Non volatile for all */ - unsigned32 gpr31; /* Non volatile for all */ - unsigned32 cr; /* PART of the CR is non volatile for all */ - unsigned32 pc; /* Program counter/Link register */ - unsigned32 msr; /* Initial interrupt level */ -} Context_Control; - -typedef struct { - /* The ABIs (PowerOpen/SVR4/EABI) only require saving f14-f31 over - * procedure calls. However, this would mean that the interrupt - * frame had to hold f0-f13, and the fpscr. And as the majority - * of tasks will not have an FP context, we will save the whole - * context here. - */ -#if (PPC_HAS_DOUBLE == 1) - double f[32]; - double fpscr; -#else - float f[32]; - float fpscr; -#endif -} Context_Control_fp; - -typedef struct CPU_Interrupt_frame { - unsigned32 stacklink; /* Ensure this is a real frame (also reg1 save) */ -#if (PPC_ABI == PPC_ABI_POWEROPEN || PPC_ABI == PPC_ABI_GCC27) - unsigned32 dummy[13]; /* Used by callees: PowerOpen ABI */ -#else - unsigned32 dummy[1]; /* Used by callees: SVR4/EABI */ -#endif - /* This is what is left out of the primary contexts */ - unsigned32 gpr0; - unsigned32 gpr2; /* play safe */ - unsigned32 gpr3; - unsigned32 gpr4; - unsigned32 gpr5; - unsigned32 gpr6; - unsigned32 gpr7; - unsigned32 gpr8; - unsigned32 gpr9; - unsigned32 gpr10; - unsigned32 gpr11; - unsigned32 gpr12; - unsigned32 gpr13; /* Play safe */ - unsigned32 gpr28; /* For internal use by the IRQ handler */ - unsigned32 gpr29; /* For internal use by the IRQ handler */ - unsigned32 gpr30; /* For internal use by the IRQ handler */ - unsigned32 gpr31; /* For internal use by the IRQ handler */ - unsigned32 cr; /* Bits of this are volatile, so no-one may save */ - unsigned32 ctr; - unsigned32 xer; - unsigned32 lr; - unsigned32 pc; - unsigned32 msr; - unsigned32 pad[3]; -} CPU_Interrupt_frame; - - -/* - * The following table contains the information required to configure - * the PowerPC processor specific parameters. - */ - -typedef struct { - void (*pretasking_hook)( void ); - void (*predriver_hook)( void ); - void (*postdriver_hook)( void ); - void (*idle_task)( void ); - boolean do_zero_of_workspace; - unsigned32 idle_task_stack_size; - unsigned32 interrupt_stack_size; - unsigned32 extra_mpci_receive_server_stack; - void * (*stack_allocate_hook)( unsigned32 ); - void (*stack_free_hook)( void* ); - /* end of fields required on all CPUs */ - - unsigned32 clicks_per_usec; /* Timer clicks per microsecond */ - void (*spurious_handler)(unsigned32 vector, CPU_Interrupt_frame *); - boolean exceptions_in_RAM; /* TRUE if in RAM */ - -#if defined(ppc403) - unsigned32 serial_per_sec; /* Serial clocks per second */ - boolean serial_external_clock; - boolean serial_xon_xoff; - boolean serial_cts_rts; - unsigned32 serial_rate; - unsigned32 timer_average_overhead; /* Average overhead of timer in ticks */ - unsigned32 timer_least_valid; /* Least valid number from timer */ - boolean timer_internal_clock; /* TRUE, when timer runs with CPU clk */ -#endif -} rtems_cpu_table; - -/* - * The following type defines an entry in the PPC's trap table. - * - * NOTE: The instructions chosen are RTEMS dependent although one is - * obligated to use two of the four instructions to perform a - * long jump. The other instructions load one register with the - * trap type (a.k.a. vector) and another with the psr. - */ - -typedef struct { - unsigned32 stwu_r1; /* stwu %r1, -(??+IP_END)(%1)*/ - unsigned32 stw_r0; /* stw %r0, IP_0(%r1) */ - unsigned32 li_r0_IRQ; /* li %r0, _IRQ */ - unsigned32 b_Handler; /* b PROC (_ISR_Handler) */ -} CPU_Trap_table_entry; - -/* - * This variable is optional. It is used on CPUs on which it is difficult - * to generate an "uninitialized" FP context. It is filled in by - * _CPU_Initialize and copied into the task's FP context area during - * _CPU_Context_Initialize. - */ - -/* EXTERN Context_Control_fp _CPU_Null_fp_context; */ - -/* - * On some CPUs, RTEMS supports a software managed interrupt stack. - * This stack is allocated by the Interrupt Manager and the switch - * is performed in _ISR_Handler. These variables contain pointers - * to the lowest and highest addresses in the chunk of memory allocated - * for the interrupt stack. Since it is unknown whether the stack - * grows up or down (in general), this give the CPU dependent - * code the option of picking the version it wants to use. - * - * NOTE: These two variables are required if the macro - * CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE. - */ - -SCORE_EXTERN void *_CPU_Interrupt_stack_low; -SCORE_EXTERN void *_CPU_Interrupt_stack_high; - -/* - * With some compilation systems, it is difficult if not impossible to - * call a high-level language routine from assembly language. This - * is especially true of commercial Ada compilers and name mangling - * C++ ones. This variable can be optionally defined by the CPU porter - * and contains the address of the routine _Thread_Dispatch. This - * can make it easier to invoke that routine at the end of the interrupt - * sequence (if a dispatch is necessary). - */ - -/* EXTERN void (*_CPU_Thread_dispatch_pointer)(); */ - -/* - * Nothing prevents the porter from declaring more CPU specific variables. - */ - - -SCORE_EXTERN struct { - unsigned32 *Nest_level; - unsigned32 *Disable_level; - void *Vector_table; - void *Stack; -#if (PPC_ABI == PPC_ABI_POWEROPEN) - unsigned32 Dispatch_r2; -#else - unsigned32 Default_r2; -#if (PPC_ABI != PPC_ABI_GCC27) - unsigned32 Default_r13; -#endif -#endif - volatile boolean *Switch_necessary; - boolean *Signal; - - unsigned32 msr_initial; -} _CPU_IRQ_info CPU_STRUCTURE_ALIGNMENT; - -/* - * The size of the floating point context area. On some CPUs this - * will not be a "sizeof" because the format of the floating point - * area is not defined -- only the size is. This is usually on - * CPUs with a "floating point save context" instruction. - */ - -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) - -/* - * (Optional) # of bytes for libmisc/stackchk to check - * If not specifed, then it defaults to something reasonable - * for most architectures. - */ - -#define CPU_STACK_CHECK_SIZE (128) - -/* - * Amount of extra stack (above minimum stack size) required by - * MPCI receive server thread. Remember that in a multiprocessor - * system this thread must exist and be able to process all directives. - */ - -#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0 - -/* - * This defines the number of entries in the ISR_Vector_table managed - * by RTEMS. - */ - -#define CPU_INTERRUPT_NUMBER_OF_VECTORS (PPC_INTERRUPT_MAX) -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (PPC_INTERRUPT_MAX - 1) - -/* - * Should be large enough to run all RTEMS tests. This insures - * that a "reasonable" small application should not have any problems. - */ - -#define CPU_STACK_MINIMUM_SIZE (1024*3) - -/* - * CPU's worst alignment requirement for data types on a byte boundary. This - * alignment does not take into account the requirements for the stack. - */ - -#define CPU_ALIGNMENT (PPC_ALIGNMENT) - -/* - * This number corresponds to the byte alignment requirement for the - * heap handler. This alignment requirement may be stricter than that - * for the data types alignment specified by CPU_ALIGNMENT. It is - * common for the heap to follow the same alignment requirement as - * CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict enough for the heap, - * then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_HEAP_ALIGNMENT (PPC_ALIGNMENT) - -/* - * This number corresponds to the byte alignment requirement for memory - * buffers allocated by the partition manager. This alignment requirement - * may be stricter than that for the data types alignment specified by - * CPU_ALIGNMENT. It is common for the partition to follow the same - * alignment requirement as CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict - * enough for the partition, then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_PARTITION_ALIGNMENT (PPC_ALIGNMENT) - -/* - * This number corresponds to the byte alignment requirement for the - * stack. This alignment requirement may be stricter than that for the - * data types alignment specified by CPU_ALIGNMENT. If the CPU_ALIGNMENT - * is strict enough for the stack, then this should be set to 0. - * - * NOTE: This must be a power of 2 either 0 or greater than CPU_ALIGNMENT. - */ - -#define CPU_STACK_ALIGNMENT (PPC_STACK_ALIGNMENT) - -/* ISR handler macros */ - -/* - * Disable all interrupts for an RTEMS critical section. The previous - * level is returned in _isr_cookie. - */ - -#define loc_string(a,b) a " (" #b ")\n" - -#define _CPU_MSR_Value( _msr_value ) \ - do { \ - _msr_value = 0; \ - asm volatile ("mfmsr %0" : "=&r" ((_msr_value)) : "0" ((_msr_value))); \ - } while (0) - -#define _CPU_MSR_SET( _msr_value ) \ -{ asm volatile ("mtmsr %0" : "=&r" ((_msr_value)) : "0" ((_msr_value))); } - -#if 0 -#define _CPU_ISR_Disable( _isr_cookie ) \ - { register unsigned int _disable_mask = PPC_MSR_DISABLE_MASK; \ - _isr_cookie = 0; \ - asm volatile ( - "mfmsr %0" : \ - "=r" ((_isr_cookie)) : \ - "0" ((_isr_cookie)) \ - ); \ - asm volatile ( - "andc %1,%0,%1" : \ - "=r" ((_isr_cookie)), "=&r" ((_disable_mask)) : \ - "0" ((_isr_cookie)), "1" ((_disable_mask)) \ - ); \ - asm volatile ( - "mtmsr %1" : \ - "=r" ((_disable_mask)) : \ - "0" ((_disable_mask)) \ - ); \ - } -#endif - -#define _CPU_ISR_Disable( _isr_cookie ) \ - { register unsigned int _disable_mask = PPC_MSR_DISABLE_MASK; \ - _isr_cookie = 0; \ - asm volatile ( \ - "mfmsr %0; andc %1,%0,%1; mtmsr %1" : \ - "=&r" ((_isr_cookie)), "=&r" ((_disable_mask)) : \ - "0" ((_isr_cookie)), "1" ((_disable_mask)) \ - ); \ - } - - -#define _CPU_Data_Cache_Block_Flush( _address ) \ - do { register void *__address = (_address); \ - register unsigned32 _zero = 0; \ - asm volatile ( "dcbf %0,%1" : \ - "=r" (_zero), "=r" (__address) : \ - "0" (_zero), "1" (__address) \ - ); \ - } while (0) - - -/* - * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). - * This indicates the end of an RTEMS critical section. The parameter - * _isr_cookie is not modified. - */ - -#define _CPU_ISR_Enable( _isr_cookie ) \ - { \ - asm volatile ( "mtmsr %0" : \ - "=r" ((_isr_cookie)) : \ - "0" ((_isr_cookie))); \ - } - -/* - * This temporarily restores the interrupt to _isr_cookie before immediately - * disabling them again. This is used to divide long RTEMS critical - * sections into two or more parts. The parameter _isr_cookie is not - * modified. - * - * NOTE: The version being used is not very optimized but it does - * not trip a problem in gcc where the disable mask does not - * get loaded. Check this for future (post 10/97 gcc versions. - */ - -#define _CPU_ISR_Flash( _isr_cookie ) \ - { register unsigned int _disable_mask = PPC_MSR_DISABLE_MASK; \ - asm volatile ( \ - "mtmsr %0; andc %1,%0,%1; mtmsr %1" : \ - "=r" ((_isr_cookie)), "=r" ((_disable_mask)) : \ - "0" ((_isr_cookie)), "1" ((_disable_mask)) \ - ); \ - } - -/* - * Map interrupt level in task mode onto the hardware that the CPU - * actually provides. Currently, interrupt levels which do not - * map onto the CPU in a generic fashion are undefined. Someday, - * it would be nice if these were "mapped" by the application - * via a callout. For example, m68k has 8 levels 0 - 7, levels - * 8 - 255 would be available for bsp/application specific meaning. - * This could be used to manage a programmable interrupt controller - * via the rtems_task_mode directive. - */ - -unsigned32 _CPU_ISR_Calculate_level( - unsigned32 new_level -); - -void _CPU_ISR_Set_level( - unsigned32 new_level -); - -unsigned32 _CPU_ISR_Get_level( void ); - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* end of ISR handler macros */ - -/* - * Simple spin delay in microsecond units for device drivers. - * This is very dependent on the clock speed of the target. - */ - -#define CPU_Get_timebase_low( _value ) \ - asm volatile( "mftb %0" : "=r" (_value) ) - -#define delay( _microseconds ) \ - do { \ - unsigned32 start, ticks, now; \ - CPU_Get_timebase_low( start ) ; \ - ticks = (_microseconds) * Cpu_table.clicks_per_usec; \ - do \ - CPU_Get_timebase_low( now ) ; \ - while (now - start < ticks); \ - } while (0) - -#define delay_in_bus_cycles( _cycles ) \ - do { \ - unsigned32 start, now; \ - CPU_Get_timebase_low( start ); \ - do \ - CPU_Get_timebase_low( now ); \ - while (now - start < (_cycles)); \ - } while (0) - - - -/* Context handler macros */ - -/* - * Initialize the context to a state suitable for starting a - * task after a context restore operation. Generally, this - * involves: - * - * - setting a starting address - * - preparing the stack - * - preparing the stack and frame pointers - * - setting the proper interrupt level in the context - * - initializing the floating point context - * - * This routine generally does not set any unnecessary register - * in the context. The state of the "general data" registers is - * undefined at task start time. - * - * NOTE: Implemented as a subroutine for the SPARC port. - */ - -void _CPU_Context_Initialize( - Context_Control *the_context, - unsigned32 *stack_base, - unsigned32 size, - unsigned32 new_level, - void *entry_point, - boolean is_fp -); - -/* - * This routine is responsible for somehow restarting the currently - * executing task. If you are lucky, then all that is necessary - * is restoring the context. Otherwise, there will need to be - * a special assembly routine which does something special in this - * case. Context_Restore should work most of the time. It will - * not work if restarting self conflicts with the stack frame - * assumptions of restoring a context. - */ - -#define _CPU_Context_Restart_self( _the_context ) \ - _CPU_Context_restore( (_the_context) ); - -/* - * The purpose of this macro is to allow the initial pointer into - * a floating point context area (used to save the floating point - * context) to be at an arbitrary place in the floating point - * context area. - * - * This is necessary because some FP units are designed to have - * their context saved as a stack which grows into lower addresses. - * Other FP units can be saved by simply moving registers into offsets - * from the base of the context area. Finally some FP units provide - * a "dump context" instruction which could fill in from high to low - * or low to high based on the whim of the CPU designers. - */ - -#define _CPU_Context_Fp_start( _base, _offset ) \ - ( (void *) _Addresses_Add_offset( (_base), (_offset) ) ) - -/* - * This routine initializes the FP context area passed to it to. - * There are a few standard ways in which to initialize the - * floating point context. The code included for this macro assumes - * that this is a CPU in which a "initial" FP context was saved into - * _CPU_Null_fp_context and it simply copies it to the destination - * context passed to it. - * - * Other models include (1) not doing anything, and (2) putting - * a "null FP status word" in the correct place in the FP context. - */ - -#define _CPU_Context_Initialize_fp( _destination ) \ - { \ - ((Context_Control_fp *) *((void **) _destination))->fpscr = PPC_INIT_FPSCR; \ - } - -/* end of Context handler macros */ - -/* Fatal Error manager macros */ - -/* - * This routine copies _error into a known place -- typically a stack - * location or a register, optionally disables interrupts, and - * halts/stops the CPU. - */ - -#define _CPU_Fatal_halt( _error ) \ - _CPU_Fatal_error(_error) - -/* end of Fatal Error manager macros */ - -/* Bitfield handler macros */ - -/* - * This routine sets _output to the bit number of the first bit - * set in _value. _value is of CPU dependent type Priority_Bit_map_control. - * This type may be either 16 or 32 bits wide although only the 16 - * least significant bits will be used. - * - * There are a number of variables in using a "find first bit" type - * instruction. - * - * (1) What happens when run on a value of zero? - * (2) Bits may be numbered from MSB to LSB or vice-versa. - * (3) The numbering may be zero or one based. - * (4) The "find first bit" instruction may search from MSB or LSB. - * - * RTEMS guarantees that (1) will never happen so it is not a concern. - * (2),(3), (4) are handled by the macros _CPU_Priority_mask() and - * _CPU_Priority_Bits_index(). These three form a set of routines - * which must logically operate together. Bits in the _value are - * set and cleared based on masks built by _CPU_Priority_mask(). - * The basic major and minor values calculated by _Priority_Major() - * and _Priority_Minor() are "massaged" by _CPU_Priority_Bits_index() - * to properly range between the values returned by the "find first bit" - * instruction. This makes it possible for _Priority_Get_highest() to - * calculate the major and directly index into the minor table. - * This mapping is necessary to ensure that 0 (a high priority major/minor) - * is the first bit found. - * - * This entire "find first bit" and mapping process depends heavily - * on the manner in which a priority is broken into a major and minor - * components with the major being the 4 MSB of a priority and minor - * the 4 LSB. Thus (0 << 4) + 0 corresponds to priority 0 -- the highest - * priority. And (15 << 4) + 14 corresponds to priority 254 -- the next - * to the lowest priority. - * - * If your CPU does not have a "find first bit" instruction, then - * there are ways to make do without it. Here are a handful of ways - * to implement this in software: - * - * - a series of 16 bit test instructions - * - a "binary search using if's" - * - _number = 0 - * if _value > 0x00ff - * _value >>=8 - * _number = 8; - * - * if _value > 0x0000f - * _value >=8 - * _number += 4 - * - * _number += bit_set_table[ _value ] - * - * where bit_set_table[ 16 ] has values which indicate the first - * bit set - */ - -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - { \ - asm volatile ("cntlzw %0, %1" : "=r" ((_output)), "=r" ((_value)) : \ - "1" ((_value))); \ - } - -/* end of Bitfield handler macros */ - -/* - * This routine builds the mask which corresponds to the bit fields - * as searched by _CPU_Bitfield_Find_first_bit(). See the discussion - * for that routine. - */ - -#define _CPU_Priority_Mask( _bit_number ) \ - ( 0x80000000 >> (_bit_number) ) - -/* - * This routine translates the bit numbers returned by - * _CPU_Bitfield_Find_first_bit() into something suitable for use as - * a major or minor component of a priority. See the discussion - * for that routine. - */ - -#define _CPU_Priority_bits_index( _priority ) \ - (_priority) - -/* end of Priority handler macros */ - -/* variables */ - -extern const unsigned32 _CPU_msrs[4]; - -/* functions */ - -/* - * _CPU_Initialize - * - * This routine performs CPU dependent initialization. - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) -); - -/* - * _CPU_ISR_install_vector - * - * This routine installs an interrupt vector. - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_Install_interrupt_stack - * - * This routine installs the hardware interrupt stack pointer. - * - * NOTE: It need only be provided if CPU_HAS_HARDWARE_INTERRUPT_STACK - * is TRUE. - */ - -void _CPU_Install_interrupt_stack( void ); - -/* - * _CPU_Context_switch - * - * This routine switches from the run context to the heir context. - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/* - * _CPU_Context_restore - * - * This routine is generallu used only to restart self in an - * efficient manner. It may simply be a label in _CPU_Context_switch. - * - * NOTE: May be unnecessary to reload some registers. - */ - -void _CPU_Context_restore( - Context_Control *new_context -); - -/* - * _CPU_Context_save_fp - * - * This routine saves the floating point context passed to it. - */ - -void _CPU_Context_save_fp( - void **fp_context_ptr -); - -/* - * _CPU_Context_restore_fp - * - * This routine restores the floating point context passed to it. - */ - -void _CPU_Context_restore_fp( - void **fp_context_ptr -); - -void _CPU_Fatal_error( - unsigned32 _error -); - -/* The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. - * - * This version will work on any processor, but if there is a better - * way for your CPU PLEASE use it. The most common way to do this is to: - * - * swap least significant two bytes with 16-bit rotate - * swap upper and lower 16-bits - * swap most significant two bytes with 16-bit rotate - * - * Some CPUs have special instructions which swap a 32-bit quantity in - * a single instruction (e.g. i486). It is probably best to avoid - * an "endian swapping control bit" in the CPU. One good reason is - * that interrupts would probably have to be disabled to insure that - * an interrupt does not try to access the same "chunk" with the wrong - * endian. Another good reason is that on some CPUs, the endian bit - * endianness for ALL fetches -- both code and data -- so the code - * will be fetched incorrectly. - */ - -static inline unsigned int CPU_swap_u32( - unsigned int value -) -{ - unsigned32 swapped; - - asm volatile("rlwimi %0,%1,8,24,31;" - "rlwimi %0,%1,24,16,23;" - "rlwimi %0,%1,8,8,15;" - "rlwimi %0,%1,24,0,7;" : - "=&r" ((swapped)) : "r" ((value))); - - return( swapped ); -} - -#define CPU_swap_u16( value ) \ - (((value&0xff) << 8) | ((value >> 8)&0xff)) - -/* - * Routines to access the decrementer register - */ - -#define PPC_Set_decrementer( _clicks ) \ - do { \ - asm volatile( "mtdec %0" : "=r" ((_clicks)) : "r" ((_clicks)) ); \ - } while (0) - -/* - * Routines to access the time base register - */ - -static inline unsigned64 PPC_Get_timebase_register( void ) -{ - unsigned32 tbr_low; - unsigned32 tbr_high; - unsigned32 tbr_high_old; - unsigned64 tbr; - - do { - asm volatile( "mftbu %0" : "=r" (tbr_high_old)); - asm volatile( "mftb %0" : "=r" (tbr_low)); - asm volatile( "mftbu %0" : "=r" (tbr_high)); - } while ( tbr_high_old != tbr_high ); - - tbr = tbr_high; - tbr <<= 32; - tbr |= tbr_low; - return tbr; -} - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/c/src/exec/score/cpu/powerpc/cpu_asm.s b/c/src/exec/score/cpu/powerpc/cpu_asm.s deleted file mode 100644 index 7370764607..0000000000 --- a/c/src/exec/score/cpu/powerpc/cpu_asm.s +++ /dev/null @@ -1,809 +0,0 @@ - -/* cpu_asm.s 1.1 - 95/12/04 - * - * This file contains the assembly code for the PowerPC implementation - * of RTEMS. - * - * Author: Andrew Bray <andy@i-cubed.co.uk> - * - * COPYRIGHT (c) 1995 by i-cubed ltd. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of i-cubed limited not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * i-cubed limited makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/cpu/no_cpu/cpu_asm.c: - * - * COPYRIGHT (c) 1989-1997. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may in - * the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <asm.h> - -/* - * Offsets for various Contexts - */ - .set GP_1, 0 - .set GP_2, (GP_1 + 4) - .set GP_13, (GP_2 + 4) - .set GP_14, (GP_13 + 4) - - .set GP_15, (GP_14 + 4) - .set GP_16, (GP_15 + 4) - .set GP_17, (GP_16 + 4) - .set GP_18, (GP_17 + 4) - - .set GP_19, (GP_18 + 4) - .set GP_20, (GP_19 + 4) - .set GP_21, (GP_20 + 4) - .set GP_22, (GP_21 + 4) - - .set GP_23, (GP_22 + 4) - .set GP_24, (GP_23 + 4) - .set GP_25, (GP_24 + 4) - .set GP_26, (GP_25 + 4) - - .set GP_27, (GP_26 + 4) - .set GP_28, (GP_27 + 4) - .set GP_29, (GP_28 + 4) - .set GP_30, (GP_29 + 4) - - .set GP_31, (GP_30 + 4) - .set GP_CR, (GP_31 + 4) - .set GP_PC, (GP_CR + 4) - .set GP_MSR, (GP_PC + 4) - -#if (PPC_HAS_DOUBLE == 1) - .set FP_0, 0 - .set FP_1, (FP_0 + 8) - .set FP_2, (FP_1 + 8) - .set FP_3, (FP_2 + 8) - .set FP_4, (FP_3 + 8) - .set FP_5, (FP_4 + 8) - .set FP_6, (FP_5 + 8) - .set FP_7, (FP_6 + 8) - .set FP_8, (FP_7 + 8) - .set FP_9, (FP_8 + 8) - .set FP_10, (FP_9 + 8) - .set FP_11, (FP_10 + 8) - .set FP_12, (FP_11 + 8) - .set FP_13, (FP_12 + 8) - .set FP_14, (FP_13 + 8) - .set FP_15, (FP_14 + 8) - .set FP_16, (FP_15 + 8) - .set FP_17, (FP_16 + 8) - .set FP_18, (FP_17 + 8) - .set FP_19, (FP_18 + 8) - .set FP_20, (FP_19 + 8) - .set FP_21, (FP_20 + 8) - .set FP_22, (FP_21 + 8) - .set FP_23, (FP_22 + 8) - .set FP_24, (FP_23 + 8) - .set FP_25, (FP_24 + 8) - .set FP_26, (FP_25 + 8) - .set FP_27, (FP_26 + 8) - .set FP_28, (FP_27 + 8) - .set FP_29, (FP_28 + 8) - .set FP_30, (FP_29 + 8) - .set FP_31, (FP_30 + 8) - .set FP_FPSCR, (FP_31 + 8) -#else - .set FP_0, 0 - .set FP_1, (FP_0 + 4) - .set FP_2, (FP_1 + 4) - .set FP_3, (FP_2 + 4) - .set FP_4, (FP_3 + 4) - .set FP_5, (FP_4 + 4) - .set FP_6, (FP_5 + 4) - .set FP_7, (FP_6 + 4) - .set FP_8, (FP_7 + 4) - .set FP_9, (FP_8 + 4) - .set FP_10, (FP_9 + 4) - .set FP_11, (FP_10 + 4) - .set FP_12, (FP_11 + 4) - .set FP_13, (FP_12 + 4) - .set FP_14, (FP_13 + 4) - .set FP_15, (FP_14 + 4) - .set FP_16, (FP_15 + 4) - .set FP_17, (FP_16 + 4) - .set FP_18, (FP_17 + 4) - .set FP_19, (FP_18 + 4) - .set FP_20, (FP_19 + 4) - .set FP_21, (FP_20 + 4) - .set FP_22, (FP_21 + 4) - .set FP_23, (FP_22 + 4) - .set FP_24, (FP_23 + 4) - .set FP_25, (FP_24 + 4) - .set FP_26, (FP_25 + 4) - .set FP_27, (FP_26 + 4) - .set FP_28, (FP_27 + 4) - .set FP_29, (FP_28 + 4) - .set FP_30, (FP_29 + 4) - .set FP_31, (FP_30 + 4) - .set FP_FPSCR, (FP_31 + 4) -#endif - - .set IP_LINK, 0 -#if (PPC_ABI == PPC_ABI_POWEROPEN || PPC_ABI == PPC_ABI_GCC27) - .set IP_0, (IP_LINK + 56) -#else - .set IP_0, (IP_LINK + 8) -#endif - .set IP_2, (IP_0 + 4) - - .set IP_3, (IP_2 + 4) - .set IP_4, (IP_3 + 4) - .set IP_5, (IP_4 + 4) - .set IP_6, (IP_5 + 4) - - .set IP_7, (IP_6 + 4) - .set IP_8, (IP_7 + 4) - .set IP_9, (IP_8 + 4) - .set IP_10, (IP_9 + 4) - - .set IP_11, (IP_10 + 4) - .set IP_12, (IP_11 + 4) - .set IP_13, (IP_12 + 4) - .set IP_28, (IP_13 + 4) - - .set IP_29, (IP_28 + 4) - .set IP_30, (IP_29 + 4) - .set IP_31, (IP_30 + 4) - .set IP_CR, (IP_31 + 4) - - .set IP_CTR, (IP_CR + 4) - .set IP_XER, (IP_CTR + 4) - .set IP_LR, (IP_XER + 4) - .set IP_PC, (IP_LR + 4) - - .set IP_MSR, (IP_PC + 4) - .set IP_END, (IP_MSR + 16) - - /* _CPU_IRQ_info offsets */ - - /* These must be in this order */ - .set Nest_level, 0 - .set Disable_level, 4 - .set Vector_table, 8 - .set Stack, 12 -#if (PPC_ABI == PPC_ABI_POWEROPEN) - .set Dispatch_r2, 16 - .set Switch_necessary, 20 -#else - .set Default_r2, 16 -#if (PPC_ABI != PPC_ABI_GCC27) - .set Default_r13, 20 - .set Switch_necessary, 24 -#else - .set Switch_necessary, 20 -#endif -#endif - .set Signal, Switch_necessary + 4 - .set msr_initial, Signal + 4 - - BEGIN_CODE -/* - * _CPU_Context_save_fp_context - * - * This routine is responsible for saving the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * Sometimes a macro implementation of this is in cpu.h which dereferences - * the ** and a similarly named routine in this file is passed something - * like a (Context_Control_fp *). The general rule on making this decision - * is to avoid writing assembly language. - */ - - ALIGN (PPC_CACHE_ALIGNMENT, PPC_CACHE_ALIGN_POWER) - PUBLIC_PROC (_CPU_Context_save_fp) -PROC (_CPU_Context_save_fp): -#if (PPC_HAS_FPU == 1) - lwz r3, 0(r3) -#if (PPC_HAS_DOUBLE == 1) - stfd f0, FP_0(r3) - stfd f1, FP_1(r3) - stfd f2, FP_2(r3) - stfd f3, FP_3(r3) - stfd f4, FP_4(r3) - stfd f5, FP_5(r3) - stfd f6, FP_6(r3) - stfd f7, FP_7(r3) - stfd f8, FP_8(r3) - stfd f9, FP_9(r3) - stfd f10, FP_10(r3) - stfd f11, FP_11(r3) - stfd f12, FP_12(r3) - stfd f13, FP_13(r3) - stfd f14, FP_14(r3) - stfd f15, FP_15(r3) - stfd f16, FP_16(r3) - stfd f17, FP_17(r3) - stfd f18, FP_18(r3) - stfd f19, FP_19(r3) - stfd f20, FP_20(r3) - stfd f21, FP_21(r3) - stfd f22, FP_22(r3) - stfd f23, FP_23(r3) - stfd f24, FP_24(r3) - stfd f25, FP_25(r3) - stfd f26, FP_26(r3) - stfd f27, FP_27(r3) - stfd f28, FP_28(r3) - stfd f29, FP_29(r3) - stfd f30, FP_30(r3) - stfd f31, FP_31(r3) - mffs f2 - stfd f2, FP_FPSCR(r3) -#else - stfs f0, FP_0(r3) - stfs f1, FP_1(r3) - stfs f2, FP_2(r3) - stfs f3, FP_3(r3) - stfs f4, FP_4(r3) - stfs f5, FP_5(r3) - stfs f6, FP_6(r3) - stfs f7, FP_7(r3) - stfs f8, FP_8(r3) - stfs f9, FP_9(r3) - stfs f10, FP_10(r3) - stfs f11, FP_11(r3) - stfs f12, FP_12(r3) - stfs f13, FP_13(r3) - stfs f14, FP_14(r3) - stfs f15, FP_15(r3) - stfs f16, FP_16(r3) - stfs f17, FP_17(r3) - stfs f18, FP_18(r3) - stfs f19, FP_19(r3) - stfs f20, FP_20(r3) - stfs f21, FP_21(r3) - stfs f22, FP_22(r3) - stfs f23, FP_23(r3) - stfs f24, FP_24(r3) - stfs f25, FP_25(r3) - stfs f26, FP_26(r3) - stfs f27, FP_27(r3) - stfs f28, FP_28(r3) - stfs f29, FP_29(r3) - stfs f30, FP_30(r3) - stfs f31, FP_31(r3) - mffs f2 - stfs f2, FP_FPSCR(r3) -#endif -#endif - blr - -/* - * _CPU_Context_restore_fp_context - * - * This routine is responsible for restoring the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * Sometimes a macro implementation of this is in cpu.h which dereferences - * the ** and a similarly named routine in this file is passed something - * like a (Context_Control_fp *). The general rule on making this decision - * is to avoid writing assembly language. - */ - - ALIGN (PPC_CACHE_ALIGNMENT, PPC_CACHE_ALIGN_POWER) - PUBLIC_PROC (_CPU_Context_restore_fp) -PROC (_CPU_Context_restore_fp): -#if (PPC_HAS_FPU == 1) - lwz r3, 0(r3) -#if (PPC_HAS_DOUBLE == 1) - lfd f2, FP_FPSCR(r3) - mtfsf 255, f2 - lfd f0, FP_0(r3) - lfd f1, FP_1(r3) - lfd f2, FP_2(r3) - lfd f3, FP_3(r3) - lfd f4, FP_4(r3) - lfd f5, FP_5(r3) - lfd f6, FP_6(r3) - lfd f7, FP_7(r3) - lfd f8, FP_8(r3) - lfd f9, FP_9(r3) - lfd f10, FP_10(r3) - lfd f11, FP_11(r3) - lfd f12, FP_12(r3) - lfd f13, FP_13(r3) - lfd f14, FP_14(r3) - lfd f15, FP_15(r3) - lfd f16, FP_16(r3) - lfd f17, FP_17(r3) - lfd f18, FP_18(r3) - lfd f19, FP_19(r3) - lfd f20, FP_20(r3) - lfd f21, FP_21(r3) - lfd f22, FP_22(r3) - lfd f23, FP_23(r3) - lfd f24, FP_24(r3) - lfd f25, FP_25(r3) - lfd f26, FP_26(r3) - lfd f27, FP_27(r3) - lfd f28, FP_28(r3) - lfd f29, FP_29(r3) - lfd f30, FP_30(r3) - lfd f31, FP_31(r3) -#else - lfs f2, FP_FPSCR(r3) - mtfsf 255, f2 - lfs f0, FP_0(r3) - lfs f1, FP_1(r3) - lfs f2, FP_2(r3) - lfs f3, FP_3(r3) - lfs f4, FP_4(r3) - lfs f5, FP_5(r3) - lfs f6, FP_6(r3) - lfs f7, FP_7(r3) - lfs f8, FP_8(r3) - lfs f9, FP_9(r3) - lfs f10, FP_10(r3) - lfs f11, FP_11(r3) - lfs f12, FP_12(r3) - lfs f13, FP_13(r3) - lfs f14, FP_14(r3) - lfs f15, FP_15(r3) - lfs f16, FP_16(r3) - lfs f17, FP_17(r3) - lfs f18, FP_18(r3) - lfs f19, FP_19(r3) - lfs f20, FP_20(r3) - lfs f21, FP_21(r3) - lfs f22, FP_22(r3) - lfs f23, FP_23(r3) - lfs f24, FP_24(r3) - lfs f25, FP_25(r3) - lfs f26, FP_26(r3) - lfs f27, FP_27(r3) - lfs f28, FP_28(r3) - lfs f29, FP_29(r3) - lfs f30, FP_30(r3) - lfs f31, FP_31(r3) -#endif -#endif - blr - - -/* _CPU_Context_switch - * - * This routine performs a normal non-FP context switch. - */ - ALIGN (PPC_CACHE_ALIGNMENT, PPC_CACHE_ALIGN_POWER) - PUBLIC_PROC (_CPU_Context_switch) -PROC (_CPU_Context_switch): - sync - isync -#if (PPC_CACHE_ALIGNMENT == 4) /* No cache */ - stw r1, GP_1(r3) - lwz r1, GP_1(r4) - stw r2, GP_2(r3) - lwz r2, GP_2(r4) -#if (PPC_USE_MULTIPLE == 1) - stmw r13, GP_13(r3) - lmw r13, GP_13(r4) -#else - stw r13, GP_13(r3) - lwz r13, GP_13(r4) - stw r14, GP_14(r3) - lwz r14, GP_14(r4) - stw r15, GP_15(r3) - lwz r15, GP_15(r4) - stw r16, GP_16(r3) - lwz r16, GP_16(r4) - stw r17, GP_17(r3) - lwz r17, GP_17(r4) - stw r18, GP_18(r3) - lwz r18, GP_18(r4) - stw r19, GP_19(r3) - lwz r19, GP_19(r4) - stw r20, GP_20(r3) - lwz r20, GP_20(r4) - stw r21, GP_21(r3) - lwz r21, GP_21(r4) - stw r22, GP_22(r3) - lwz r22, GP_22(r4) - stw r23, GP_23(r3) - lwz r23, GP_23(r4) - stw r24, GP_24(r3) - lwz r24, GP_24(r4) - stw r25, GP_25(r3) - lwz r25, GP_25(r4) - stw r26, GP_26(r3) - lwz r26, GP_26(r4) - stw r27, GP_27(r3) - lwz r27, GP_27(r4) - stw r28, GP_28(r3) - lwz r28, GP_28(r4) - stw r29, GP_29(r3) - lwz r29, GP_29(r4) - stw r30, GP_30(r3) - lwz r30, GP_30(r4) - stw r31, GP_31(r3) - lwz r31, GP_31(r4) -#endif - mfcr r5 - stw r5, GP_CR(r3) - lwz r5, GP_CR(r4) - mflr r6 - mtcrf 255, r5 - stw r6, GP_PC(r3) - lwz r6, GP_PC(r4) - mfmsr r7 - mtlr r6 - stw r7, GP_MSR(r3) - lwz r7, GP_MSR(r4) - mtmsr r7 -#endif -#if (PPC_CACHE_ALIGNMENT == 16) - /* This assumes that all the registers are in the given order */ - li r5, 16 - addi r3,r3,-4 -#if ( PPC_USE_DATA_CACHE ) - dcbz r5, r3 -#endif - stw r1, GP_1+4(r3) - stw r2, GP_2+4(r3) -#if (PPC_USE_MULTIPLE == 1) - addi r3, r3, GP_14+4 -#if ( PPC_USE_DATA_CACHE ) - dcbz r5, r3 -#endif - - addi r3, r3, GP_18-GP_14 -#if ( PPC_USE_DATA_CACHE ) - dcbz r5, r3 -#endif - addi r3, r3, GP_22-GP_18 -#if ( PPC_USE_DATA_CACHE ) - dcbz r5, r3 -#endif - addi r3, r3, GP_26-GP_22 -#if ( PPC_USE_DATA_CACHE ) - dcbz r5, r3 -#endif - stmw r13, GP_13-GP_26(r3) -#else - stw r13, GP_13+4(r3) - stwu r14, GP_14+4(r3) -#if ( PPC_USE_DATA_CACHE ) - dcbz r5, r3 -#endif - stw r15, GP_15-GP_14(r3) - stw r16, GP_16-GP_14(r3) - stw r17, GP_17-GP_14(r3) - stwu r18, GP_18-GP_14(r3) -#if ( PPC_USE_DATA_CACHE ) - dcbz r5, r3 -#endif - stw r19, GP_19-GP_18(r3) - stw r20, GP_20-GP_18(r3) - stw r21, GP_21-GP_18(r3) - stwu r22, GP_22-GP_18(r3) -#if ( PPC_USE_DATA_CACHE ) - dcbz r5, r3 -#endif - stw r23, GP_23-GP_22(r3) - stw r24, GP_24-GP_22(r3) - stw r25, GP_25-GP_22(r3) - stwu r26, GP_26-GP_22(r3) -#if ( PPC_USE_DATA_CACHE ) - dcbz r5, r3 -#endif - stw r27, GP_27-GP_26(r3) - stw r28, GP_28-GP_26(r3) - stw r29, GP_29-GP_26(r3) - stw r30, GP_30-GP_26(r3) - stw r31, GP_31-GP_26(r3) -#endif -#if ( PPC_USE_DATA_CACHE ) - dcbt r0, r4 -#endif - mfcr r6 - stw r6, GP_CR-GP_26(r3) - mflr r7 - stw r7, GP_PC-GP_26(r3) - mfmsr r8 - stw r8, GP_MSR-GP_26(r3) - -#if ( PPC_USE_DATA_CACHE ) - dcbt r5, r4 -#endif - lwz r1, GP_1(r4) - lwz r2, GP_2(r4) -#if (PPC_USE_MULTIPLE == 1) - addi r4, r4, GP_15 -#if ( PPC_USE_DATA_CACHE ) - dcbt r5, r4 -#endif - addi r4, r4, GP_19-GP_15 -#if ( PPC_USE_DATA_CACHE ) - dcbt r5, r4 -#endif - addi r4, r4, GP_23-GP_19 -#if ( PPC_USE_DATA_CACHE ) - dcbt r5, r4 -#endif - addi r4, r4, GP_27-GP_23 -#if ( PPC_USE_DATA_CACHE ) - dcbt r5, r4 -#endif - lmw r13, GP_13-GP_27(r4) -#else - lwz r13, GP_13(r4) - lwz r14, GP_14(r4) - lwzu r15, GP_15(r4) -#if ( PPC_USE_DATA_CACHE ) - dcbt r5, r4 -#endif - lwz r16, GP_16-GP_15(r4) - lwz r17, GP_17-GP_15(r4) - lwz r18, GP_18-GP_15(r4) - lwzu r19, GP_19-GP_15(r4) -#if ( PPC_USE_DATA_CACHE ) - dcbt r5, r4 -#endif - lwz r20, GP_20-GP_19(r4) - lwz r21, GP_21-GP_19(r4) - lwz r22, GP_22-GP_19(r4) - lwzu r23, GP_23-GP_19(r4) -#if ( PPC_USE_DATA_CACHE ) - dcbt r5, r4 -#endif - lwz r24, GP_24-GP_23(r4) - lwz r25, GP_25-GP_23(r4) - lwz r26, GP_26-GP_23(r4) - lwzu r27, GP_27-GP_23(r4) -#if ( PPC_USE_DATA_CACHE ) - dcbt r5, r4 -#endif - lwz r28, GP_28-GP_27(r4) - lwz r29, GP_29-GP_27(r4) - lwz r30, GP_30-GP_27(r4) - lwz r31, GP_31-GP_27(r4) -#endif - lwz r6, GP_CR-GP_27(r4) - lwz r7, GP_PC-GP_27(r4) - lwz r8, GP_MSR-GP_27(r4) - mtcrf 255, r6 - mtlr r7 - mtmsr r8 -#endif -#if (PPC_CACHE_ALIGNMENT == 32) - /* This assumes that all the registers are in the given order */ - li r5, 32 - addi r3,r3,-4 -#if ( PPC_USE_DATA_CACHE ) - dcbz r5, r3 -#endif - stw r1, GP_1+4(r3) - stw r2, GP_2+4(r3) -#if (PPC_USE_MULTIPLE == 1) - addi r3, r3, GP_18+4 -#if ( PPC_USE_DATA_CACHE ) - dcbz r5, r3 -#endif - stmw r13, GP_13-GP_18(r3) -#else - stw r13, GP_13+4(r3) - stw r14, GP_14+4(r3) - stw r15, GP_15+4(r3) - stw r16, GP_16+4(r3) - stw r17, GP_17+4(r3) - stwu r18, GP_18+4(r3) -#if ( PPC_USE_DATA_CACHE ) - dcbz r5, r3 -#endif - stw r19, GP_19-GP_18(r3) - stw r20, GP_20-GP_18(r3) - stw r21, GP_21-GP_18(r3) - stw r22, GP_22-GP_18(r3) - stw r23, GP_23-GP_18(r3) - stw r24, GP_24-GP_18(r3) - stw r25, GP_25-GP_18(r3) - stw r26, GP_26-GP_18(r3) - stw r27, GP_27-GP_18(r3) - stw r28, GP_28-GP_18(r3) - stw r29, GP_29-GP_18(r3) - stw r30, GP_30-GP_18(r3) - stw r31, GP_31-GP_18(r3) -#endif -#if ( PPC_USE_DATA_CACHE ) - dcbt r0, r4 -#endif - mfcr r6 - stw r6, GP_CR-GP_18(r3) - mflr r7 - stw r7, GP_PC-GP_18(r3) - mfmsr r8 - stw r8, GP_MSR-GP_18(r3) - -#if ( PPC_USE_DATA_CACHE ) - dcbt r5, r4 -#endif - lwz r1, GP_1(r4) - lwz r2, GP_2(r4) -#if (PPC_USE_MULTIPLE == 1) - addi r4, r4, GP_19 -#if ( PPC_USE_DATA_CACHE ) - dcbt r5, r4 -#endif - lmw r13, GP_13-GP_19(r4) -#else - lwz r13, GP_13(r4) - lwz r14, GP_14(r4) - lwz r15, GP_15(r4) - lwz r16, GP_16(r4) - lwz r17, GP_17(r4) - lwz r18, GP_18(r4) - lwzu r19, GP_19(r4) -#if ( PPC_USE_DATA_CACHE ) - dcbt r5, r4 -#endif - lwz r20, GP_20-GP_19(r4) - lwz r21, GP_21-GP_19(r4) - lwz r22, GP_22-GP_19(r4) - lwz r23, GP_23-GP_19(r4) - lwz r24, GP_24-GP_19(r4) - lwz r25, GP_25-GP_19(r4) - lwz r26, GP_26-GP_19(r4) - lwz r27, GP_27-GP_19(r4) - lwz r28, GP_28-GP_19(r4) - lwz r29, GP_29-GP_19(r4) - lwz r30, GP_30-GP_19(r4) - lwz r31, GP_31-GP_19(r4) -#endif - lwz r6, GP_CR-GP_19(r4) - lwz r7, GP_PC-GP_19(r4) - lwz r8, GP_MSR-GP_19(r4) - mtcrf 255, r6 - mtlr r7 - mtmsr r8 -#endif - blr - -/* - * _CPU_Context_restore - * - * This routine is generallu used only to restart self in an - * efficient manner. It may simply be a label in _CPU_Context_switch. - * - * NOTE: May be unnecessary to reload some registers. - */ -/* - * ACB: Don't worry about cache optimisation here - this is not THAT critical. - */ - ALIGN (PPC_CACHE_ALIGNMENT, PPC_CACHE_ALIGN_POWER) - PUBLIC_PROC (_CPU_Context_restore) -PROC (_CPU_Context_restore): - lwz r5, GP_CR(r3) - lwz r6, GP_PC(r3) - lwz r7, GP_MSR(r3) - mtcrf 255, r5 - mtlr r6 - mtmsr r7 - lwz r1, GP_1(r3) - lwz r2, GP_2(r3) -#if (PPC_USE_MULTIPLE == 1) - lmw r13, GP_13(r3) -#else - lwz r13, GP_13(r3) - lwz r14, GP_14(r3) - lwz r15, GP_15(r3) - lwz r16, GP_16(r3) - lwz r17, GP_17(r3) - lwz r18, GP_18(r3) - lwz r19, GP_19(r3) - lwz r20, GP_20(r3) - lwz r21, GP_21(r3) - lwz r22, GP_22(r3) - lwz r23, GP_23(r3) - lwz r24, GP_24(r3) - lwz r25, GP_25(r3) - lwz r26, GP_26(r3) - lwz r27, GP_27(r3) - lwz r28, GP_28(r3) - lwz r29, GP_29(r3) - lwz r30, GP_30(r3) - lwz r31, GP_31(r3) -#endif - - blr - -/* Individual interrupt prologues look like this: - * #if (PPC_ABI == PPC_ABI_POWEROPEN || PPC_ABI == PPC_ABI_GCC27) - * #if (PPC_HAS_FPU) - * stwu r1, -(20*4 + 18*8 + IP_END)(r1) - * #else - * stwu r1, -(20*4 + IP_END)(r1) - * #endif - * #else - * stwu r1, -(IP_END)(r1) - * #endif - * stw r0, IP_0(r1) - * - * li r0, vectornum - * b PROC (_ISR_Handler{,C}) - */ - -/* void __ISR_Handler() - * - * This routine provides the RTEMS interrupt management. - * The vector number is in r0. R0 has already been stacked. - * - */ - ALIGN (PPC_CACHE_ALIGNMENT, PPC_CACHE_ALIGN_POWER) - PUBLIC_PROC (_ISR_Handler) -PROC (_ISR_Handler): -#define LABEL(x) x -/* XXX ?? -#define MTSAVE(x) mtspr sprg0, x -#define MFSAVE(x) mfspr x, sprg0 -*/ -#define MTPC(x) mtspr srr0, x -#define MFPC(x) mfspr x, srr0 -#define MTMSR(x) mtspr srr1, x -#define MFMSR(x) mfspr x, srr1 - - #include "irq_stub.s" - rfi - -#if (PPC_HAS_RFCI == 1) -/* void __ISR_HandlerC() - * - * This routine provides the RTEMS interrupt management. - * For critical interrupts - * - */ - ALIGN (PPC_CACHE_ALIGNMENT, PPC_CACHE_ALIGN_POWER) - PUBLIC_PROC (_ISR_HandlerC) -PROC (_ISR_HandlerC): -#undef LABEL -#undef MTSAVE -#undef MFSAVE -#undef MTPC -#undef MFPC -#undef MTMSR -#undef MFMSR -#define LABEL(x) x##_C -/* XXX?? -#define MTSAVE(x) mtspr sprg1, x -#define MFSAVE(x) mfspr x, sprg1 -*/ -#define MTPC(x) mtspr srr2, x -#define MFPC(x) mfspr x, srr2 -#define MTMSR(x) mtspr srr3, x -#define MFMSR(x) mfspr x, srr3 - #include "irq_stub.s" - rfci -#endif - -/* PowerOpen descriptors for indirect function calls. - */ - -#if (PPC_ABI == PPC_ABI_POWEROPEN) - DESCRIPTOR (_CPU_Context_save_fp) - DESCRIPTOR (_CPU_Context_restore_fp) - DESCRIPTOR (_CPU_Context_switch) - DESCRIPTOR (_CPU_Context_restore) - DESCRIPTOR (_ISR_Handler) -#if (PPC_HAS_RFCI == 1) - DESCRIPTOR (_ISR_HandlerC) -#endif -#endif diff --git a/c/src/exec/score/cpu/powerpc/irq_stub.s b/c/src/exec/score/cpu/powerpc/irq_stub.s deleted file mode 100644 index 76c8927305..0000000000 --- a/c/src/exec/score/cpu/powerpc/irq_stub.s +++ /dev/null @@ -1,268 +0,0 @@ -/* - * This file contains the interrupt handler assembly code for the PowerPC - * implementation of RTEMS. It is #included from cpu_asm.s. - * - * Author: Andrew Bray <andy@i-cubed.co.uk> - * - * COPYRIGHT (c) 1995 by i-cubed ltd. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of i-cubed limited not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * i-cubed limited makes no representations about the suitability - * of this software for any purpose. - * - * $Id$ - */ - -/* void __ISR_Handler() - * - * This routine provides the RTEMS interrupt management. - * The vector number is in r0. R0 has already been stacked. - * - */ - PUBLIC_VAR (_CPU_IRQ_info ) - - /* Finish off the interrupt frame */ - stw r2, IP_2(r1) - stw r3, IP_3(r1) - stw r4, IP_4(r1) - stw r5, IP_5(r1) - stw r6, IP_6(r1) - stw r7, IP_7(r1) - stw r8, IP_8(r1) - stw r9, IP_9(r1) - stw r10, IP_10(r1) - stw r11, IP_11(r1) - stw r12, IP_12(r1) - stw r13, IP_13(r1) - stmw r28, IP_28(r1) - mfcr r5 - mfctr r6 - mfxer r7 - mflr r8 - MFPC (r9) - MFMSR (r10) - /* Establish addressing */ -#if (PPC_USE_SPRG) - mfspr r11, sprg3 -#else - lis r11,_CPU_IRQ_info@ha - addi r11,r11,_CPU_IRQ_info@l -#endif - dcbt r0, r11 - stw r5, IP_CR(r1) - stw r6, IP_CTR(r1) - stw r7, IP_XER(r1) - stw r8, IP_LR(r1) - stw r9, IP_PC(r1) - stw r10, IP_MSR(r1) - - lwz r30, Vector_table(r11) - slwi r4,r0,2 - lwz r28, Nest_level(r11) - add r4, r4, r30 - - lwz r30, 0(r28) - mr r3, r0 - lwz r31, Stack(r11) - /* - * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) - * if ( _ISR_Nest_level == 0 ) - * switch to software interrupt stack - * #endif - */ - /* Switch stacks, here we must prevent ALL interrupts */ -#if (PPC_USE_SPRG) - mfmsr r5 - mfspr r6, sprg2 -#else - lwz r6,msr_initial(r11) - lis r5,~PPC_MSR_DISABLE_MASK@ha - ori r5,r5,~PPC_MSR_DISABLE_MASK@l - and r6,r6,r5 - mfmsr r5 -#endif - mtmsr r6 - cmpwi r30, 0 - lwz r29, Disable_level(r11) - subf r31,r1,r31 - bne LABEL (nested) - stwux r1,r1,r31 -LABEL (nested): - /* - * _ISR_Nest_level++; - */ - lwz r31, 0(r29) - addi r30,r30,1 - stw r30,0(r28) - /* From here on out, interrupts can be re-enabled. RTEMS - * convention says not. - */ - lwz r4,0(r4) - /* - * _Thread_Dispatch_disable_level++; - */ - addi r31,r31,1 - stw r31, 0(r29) -/* SCE 980217 - * - * We need address translation ON when we call our ISR routine - - mtmsr r5 - - */ - - /* - * (*_ISR_Vector_table[ vector ])( vector ); - */ -#if (PPC_ABI == PPC_ABI_POWEROPEN) - lwz r6,0(r4) - lwz r2,4(r4) - mtlr r6 - lwz r11,8(r4) -#endif -#if (PPC_ABI == PPC_ABI_GCC27) - lwz r2, Default_r2(r11) - mtlr r4 - #lwz r2, 0(r2) -#endif -#if (PPC_ABI == PPC_ABI_SVR4 || PPC_ABI == PPC_ABI_EABI) - mtlr r4 - lwz r2, Default_r2(r11) - lwz r13, Default_r13(r11) - #lwz r2, 0(r2) - #lwz r13, 0(r13) -#endif - mr r4,r1 - blrl - /* NOP marker for debuggers */ - or r6,r6,r6 - - /* We must re-disable the interrupts */ -#if (PPC_USE_SPRG) - mfspr r11, sprg3 - mfspr r0, sprg2 -#else - lis r11,_CPU_IRQ_info@ha - addi r11,r11,_CPU_IRQ_info@l - lwz r0,msr_initial(r11) - lis r30,~PPC_MSR_DISABLE_MASK@ha - ori r30,r30,~PPC_MSR_DISABLE_MASK@l - and r0,r0,r30 -#endif - mtmsr r0 - lwz r30, 0(r28) - lwz r31, 0(r29) - - /* - * if (--Thread_Dispatch_disable,--_ISR_Nest_level) - * goto easy_exit; - */ - addi r30, r30, -1 - cmpwi r30, 0 - addi r31, r31, -1 - stw r30, 0(r28) - stw r31, 0(r29) - bne LABEL (easy_exit) - cmpwi r31, 0 - - lwz r30, Switch_necessary(r11) - - /* - * #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE ) - * restore stack - * #endif - */ - lwz r1,0(r1) - bne LABEL (easy_exit) - lwz r30, 0(r30) - lwz r31, Signal(r11) - - /* - * if ( _Context_Switch_necessary ) - * goto switch - */ - cmpwi r30, 0 - lwz r28, 0(r31) - li r6,0 - bne LABEL (switch) - /* - * if ( !_ISR_Signals_to_thread_executing ) - * goto easy_exit - * _ISR_Signals_to_thread_executing = 0; - */ - cmpwi r28, 0 - beq LABEL (easy_exit) - - /* - * switch: - * call _Thread_Dispatch() or prepare to return to _ISR_Dispatch - */ -LABEL (switch): - stw r6, 0(r31) - /* Re-enable interrupts */ - lwz r0, IP_MSR(r1) -#if (PPC_ABI == PPC_ABI_POWEROPEN) - lwz r2, Dispatch_r2(r11) -#else - /* R2 and R13 still hold their values from the last call */ -#endif - mtmsr r0 - bl SYM (_Thread_Dispatch) - /* NOP marker for debuggers */ - or r6,r6,r6 - /* - * prepare to get out of interrupt - */ - /* Re-disable IRQs */ -#if (PPC_USE_SPRG) - mfspr r0, sprg2 -#else - lis r11,_CPU_IRQ_info@ha - addi r11,r11,_CPU_IRQ_info@l - lwz r0,msr_initial(r11) - lis r5,~PPC_MSR_DISABLE_MASK@ha - ori r5,r5,~PPC_MSR_DISABLE_MASK@l - and r0,r0,r5 -#endif - mtmsr r0 - - /* - * easy_exit: - * prepare to get out of interrupt - * return from interrupt - */ -LABEL (easy_exit): - lwz r5, IP_CR(r1) - lwz r6, IP_CTR(r1) - lwz r7, IP_XER(r1) - lwz r8, IP_LR(r1) - lwz r9, IP_PC(r1) - lwz r10, IP_MSR(r1) - mtcrf 255,r5 - mtctr r6 - mtxer r7 - mtlr r8 - MTPC (r9) - MTMSR (r10) - lwz r0, IP_0(r1) - lwz r2, IP_2(r1) - lwz r3, IP_3(r1) - lwz r4, IP_4(r1) - lwz r5, IP_5(r1) - lwz r6, IP_6(r1) - lwz r7, IP_7(r1) - lwz r8, IP_8(r1) - lwz r9, IP_9(r1) - lwz r10, IP_10(r1) - lwz r11, IP_11(r1) - lwz r12, IP_12(r1) - lwz r13, IP_13(r1) - lmw r28, IP_28(r1) - lwz r1, 0(r1) diff --git a/c/src/exec/score/cpu/powerpc/ppc.h b/c/src/exec/score/cpu/powerpc/ppc.h deleted file mode 100644 index a4b091c430..0000000000 --- a/c/src/exec/score/cpu/powerpc/ppc.h +++ /dev/null @@ -1,494 +0,0 @@ -/* ppc.h - * - * This file contains definitions for the IBM/Motorola PowerPC - * family members. - * - * Author: Andrew Bray <andy@i-cubed.co.uk> - * - * COPYRIGHT (c) 1995 by i-cubed ltd. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of i-cubed limited not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * i-cubed limited makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/cpu/no_cpu/no_cpu.h: - * - * COPYRIGHT (c) 1989-1997. - * On-Line Applications Research Corporation (OAR). - * - * The license and distribution terms for this file may in - * the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * - * Note: - * This file is included by both C and assembler code ( -DASM ) - * - * $Id$ - */ - - -#ifndef _INCLUDE_PPC_h -#define _INCLUDE_PPC_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * Define the name of the CPU family. - */ - -#define CPU_NAME "PowerPC" - -/* - * This file contains the information required to build - * RTEMS for a particular member of the PowerPC family. It does - * this by setting variables to indicate which implementation - * dependent features are present in a particular member - * of the family. - * - * The following architectural feature definitions are defaulted - * unless specifically set by the model definition: - * - * + PPC_DEBUG_MODEL - PPC_DEBUG_MODEL_STANDARD - * + PPC_INTERRUPT_MAX - 16 - * + PPC_CACHE_ALIGNMENT - 32 - * + PPC_LOW_POWER_MODE - PPC_LOW_POWER_MODE_NONE - * + PPC_HAS_EXCEPTION_PREFIX - 1 - * + PPC_HAS_FPU - 1 - * + PPC_HAS_DOUBLE - 1 if PPC_HAS_FPU, - * - 0 otherwise - * + PPC_USE_MULTIPLE - 0 - */ - -/* - * Define the debugging assistance models found in the PPC family. - * - * Standard: single step and branch trace - * Single Step Only: single step only - * IBM 4xx: debug exception - */ - -#define PPC_DEBUG_MODEL_STANDARD 1 -#define PPC_DEBUG_MODEL_SINGLE_STEP_ONLY 2 -#define PPC_DEBUG_MODEL_IBM4xx 3 - -/* - * Define the low power mode models - * - * Standard: as defined for 603e - * Nap Mode: nap mode only (604) - * XXX 403GB, 603, 603e, 604, 821 - */ - -#define PPC_LOW_POWER_MODE_NONE 0 -#define PPC_LOW_POWER_MODE_STANDARD 1 - -#if defined(ppc403) -/* - * IBM 403 - * - * Developed for 403GA. Book checked for 403GB. - * - * Does not have user mode. - */ - -#define CPU_MODEL_NAME "PowerPC 403" -#define PPC_ALIGNMENT 4 -#define PPC_CACHE_ALIGNMENT 16 -#define PPC_HAS_RFCI 1 -#define PPC_HAS_FPU 0 -#define PPC_USE_MULTIPLE 1 -#define PPC_I_CACHE 2048 -#define PPC_D_CACHE 1024 - -#define PPC_DEBUG_MODEL PPC_DEBUG_MODEL_IBM4xx -#define PPC_HAS_EXCEPTION_PREFIX 0 -#define PPC_HAS_EVPR 1 - -#elif defined(ppc601) -/* - * Submitted with original port -- book checked only. - */ - -#define CPU_MODEL_NAME "PowerPC 601" - -#define PPC_ALIGNMENT 8 -#define PPC_USE_MULTIPLE 1 -#define PPC_I_CACHE 0 -#define PPC_D_CACHE 32768 - -#define PPC_DEBUG_MODEL PPC_DEBUG_MODEL_SINGLE_STEP_ONLY - -#elif defined(ppc602) -/* - * Submitted with original port -- book checked only. - */ - -#define CPU_MODEL_NAME "PowerPC 602" - -#define PPC_ALIGNMENT 4 -#define PPC_HAS_DOUBLE 0 -#define PPC_I_CACHE 4096 -#define PPC_D_CACHE 4096 - -#elif defined(ppc603) -/* - * Submitted with original port -- book checked only. - */ - -#define CPU_MODEL_NAME "PowerPC 603" - -#define PPC_ALIGNMENT 8 -#define PPC_I_CACHE 8192 -#define PPC_D_CACHE 8192 - -#elif defined(ppc603e) - -#define CPU_MODEL_NAME "PowerPC 603e" -/* - * Submitted with original port. - * - * Known to work on real hardware. - */ - -#define PPC_ALIGNMENT 8 -#define PPC_I_CACHE 16384 -#define PPC_D_CACHE 16384 - -#define PPC_LOW_POWER_MODE PPC_LOW_POWER_MODE_STANDARD - -#elif defined(ppc604) -/* - * Submitted with original port -- book checked only. - */ - -#define CPU_MODEL_NAME "PowerPC 604" - -#define PPC_ALIGNMENT 8 -#define PPC_I_CACHE 16384 -#define PPC_D_CACHE 16384 - -#else - -#error "Unsupported CPU Model" - -#endif - -/* - * Application binary interfaces. - * - * PPC_ABI MUST be defined as one of these. - * Only PPC_ABI_POWEROPEN is currently fully supported. - * Only EABI will be supported in the end when - * the tools are there. - * Only big endian is currently supported. - */ -/* - * PowerOpen ABI. This is Andy's hack of the - * PowerOpen ABI to ELF. ELF rather than a - * XCOFF assembler is used. This may work - * if PPC_ASM == PPC_ASM_XCOFF is defined. - */ -#define PPC_ABI_POWEROPEN 0 -/* - * GCC 2.7.0 munched version of EABI, with - * PowerOpen calling convention and stack frames, - * but EABI style indirect function calls. - */ -#define PPC_ABI_GCC27 1 -/* - * SVR4 ABI - */ -#define PPC_ABI_SVR4 2 -/* - * Embedded ABI - */ -#define PPC_ABI_EABI 3 - -#if (PPC_ABI == PPC_ABI_POWEROPEN) -#define PPC_STACK_ALIGNMENT 8 -#elif (PPC_ABI == PPC_ABI_GCC27) -#define PPC_STACK_ALIGNMENT 8 -#elif (PPC_ABI == PPC_ABI_SVR4) -#define PPC_STACK_ALIGNMENT 16 -#elif (PPC_ABI == PPC_ABI_EABI) -#define PPC_STACK_ALIGNMENT 8 -#else -#error "PPC_ABI is not properly defined" -#endif -#ifndef PPC_ABI -#error "PPC_ABI is not properly defined" -#endif - -/* - * Assemblers. - * PPC_ASM MUST be defined as one of these. - * - * PPC_ASM_ELF: ELF assembler. Currently used for all ABIs. - * PPC_ASM_XCOFF: XCOFF assembler. May be needed for PowerOpen ABI. - * - * NOTE: Only PPC_ABI_ELF is currently fully supported. - */ - -#define PPC_ASM_ELF 0 -#define PPC_ASM_XCOFF 1 - -/* - * Use the default debug scheme defined in the architectural specification - * if another model has not been specified. - */ - -#ifndef PPC_DEBUG_MODEL -#define PPC_DEBUG_MODEL PPC_DEBUG_MODEL_STANDARD -#endif - -/* - * If the maximum number of exception sources has not been defined, - * then default it to 16. - */ - -#ifndef PPC_INTERRUPT_MAX -#define PPC_INTERRUPT_MAX 16 -#endif - -/* - * Unless specified otherwise, the cache line size is defaulted to 32. - * - * The derive the power of 2 the cache line is. - */ - -#ifndef PPC_CACHE_ALIGNMENT -#define PPC_CACHE_ALIGNMENT 32 -#endif - -#if (PPC_CACHE_ALIGNMENT == 16) -#define PPC_CACHE_ALIGN_POWER 4 -#elif (PPC_CACHE_ALIGNMENT == 32) -#define PPC_CACHE_ALIGN_POWER 5 -#else -#error "Undefined power of 2 for PPC_CACHE_ALIGNMENT" -#endif - -/* - * Unless otherwise specified, assume the model has an IP/EP bit to - * set the exception address prefix. - */ - -#ifndef PPC_HAS_EXCEPTION_PREFIX -#define PPC_HAS_EXCEPTION_PREFIX 1 -#endif - -/* - * Unless otherwise specified, assume the model does NOT have - * 403 style EVPR register to set the exception address prefix. - */ - -#ifndef PPC_HAS_EVPR -#define PPC_HAS_EVPR 0 -#endif - -/* - * If no low power mode model was specified, then assume there is none. - */ - -#ifndef PPC_LOW_POWER_MODE -#define PPC_LOW_POWER_MODE PPC_LOW_POWER_MODE_NONE -#endif - -/* - * Unless specified above, then assume the model has FP support. - */ - -#ifndef PPC_HAS_FPU -#define PPC_HAS_FPU 1 -#endif - -/* - * Unless specified above, If the model has FP support, it is assumed to - * support doubles (8-byte floating point numbers). - * - * If the model does NOT have FP support, then the model does - * NOT have double length FP registers. - */ - -#ifndef PPC_HAS_DOUBLE -#if (PPC_HAS_FPU) -#define PPC_HAS_DOUBLE 1 -#else -#define PPC_HAS_DOUBLE 0 -#endif -#endif - -/* - * Unless specified above, then assume the model does NOT have critical - * interrupt support. - */ - -#ifndef PPC_HAS_RFCI -#define PPC_HAS_RFCI 0 -#endif - -/* - * Unless specified above, do not use the load/store multiple instructions - * in a context switch. - */ - -#ifndef PPC_USE_MULTIPLE -#define PPC_USE_MULTIPLE 0 -#endif - -/* - * The following exceptions are not maskable, and are not - * necessarily predictable, so cannot be offered to RTEMS: - * Alignment exception - handled by the CPU module - * Data exceptions. - * Instruction exceptions. - */ - -/* - * Base Interrupt vectors supported on all models. - */ -#define PPC_IRQ_SYSTEM_RESET 0 /* 0x00100 - System reset. */ -#define PPC_IRQ_MCHECK 1 /* 0x00200 - Machine check */ -#define PPC_IRQ_PROTECT 2 /* 0x00300 - Protection violation */ -#define PPC_IRQ_ISI 3 /* 0x00400 - Instruction Fetch error */ -#define PPC_IRQ_EXTERNAL 4 /* 0x00500 - External interrupt */ -#define PPC_IRQ_ALIGNMENT 5 /* 0X00600 - Alignment exception */ -#define PPC_IRQ_PROGRAM 6 /* 0x00700 - Program exception */ -#define PPC_IRQ_NOFP 7 /* 0x00800 - Floating point unavailable */ -#define PPC_IRQ_DECREMENTER 8 /* 0x00900 - Decrementer interrupt */ -#define PPC_IRQ_RESERVED_A 9 /* 0x00a00 - Implementation Reserved */ -#define PPC_IRQ_RESERVED_B 10 /* 0x00a00 - Implementation Reserved */ -#define PPC_IRQ_SCALL 11 /* 0x00c00 - System call */ -#define PPC_IRQ_TRACE 12 /* 0x00d00 - Trace Exception */ -#define PPC_IRQ_FP_ASST 13 /* ox00e00 - Floating point assist */ -#define PPC_STD_IRQ_LAST PPC_IRQ_FP_ASST - -#define PPC_IRQ_FIRST PPC_IRQ_SYSTEM_RESET - -#if defined(ppc403) - -#define PPC_IRQ_CRIT PPC_IRQ_SYSTEM_RESET /*0x00100- Critical int. pin */ -#define PPC_IRQ_PIT (PPC_STD_IRQ_LAST+1) /*0x01000- Pgm interval timer*/ -#define PPC_IRQ_FIT (PPC_STD_IRQ_LAST+2) /*0x01010- Fixed int. timer */ -#define PPC_IRQ_WATCHDOG (PPC_STD_IRQ_LAST+3) /*0x01020- Watchdog timer */ -#define PPC_IRQ_DEBUG (PPC_STD_IRQ_LAST+4) /*0x02000- Debug exceptions */ -#define PPC_IRQ_LAST PPC_IRQ_DEBUG - -#elif defined(ppc601) -#define PPC_IRQ_TRACE (PPC_STD_IRQ_LAST+1) /*0x02000-Run/Trace Exception*/ -#define PPC_IRQ_LAST PPC_IRQ_TRACE - -#elif defined(ppc602) -#define PPC_IRQ_LAST (PPC_STD_IRQ_LAST) - -#elif defined(ppc603) -#define PPC_IRQ_TRANS_MISS (PPC_STD_IRQ_LAST+1) /*0x1000-Ins Translation Miss*/ -#define PPC_IRQ_DATA_LOAD (PPC_STD_IRQ_LAST+2) /*0x1100-Data Load Trans Miss*/ -#define PPC_IRQ_DATA_STORE (PPC_STD_IRQ_LAST+3) /*0x1200-Data Store Miss */ -#define PPC_IRQ_ADDR_BRK (PPC_STD_IRQ_LAST+4) /*0x1300-Instruction Bkpoint */ -#define PPC_IRQ_SYS_MGT (PPC_STD_IRQ_LAST+5) /*0x1400-System Management */ -#define PPC_IRQ_LAST PPC_IRQ_SYS_MGT - -#elif defined(ppc603e) -#define PPC_TLB_INST_MISS (PPC_STD_IRQ_LAST+1) /*0x1000-Instruction TLB Miss*/ -#define PPC_TLB_LOAD_MISS (PPC_STD_IRQ_LAST+2) /*0x1100-TLB miss on load */ -#define PPC_TLB_STORE_MISS (PPC_STD_IRQ_LAST+3) /*0x1200-TLB Miss on store */ -#define PPC_IRQ_ADDRBRK (PPC_STD_IRQ_LAST+4) /*0x1300-Instruct addr break */ -#define PPC_IRQ_SYS_MGT (PPC_STD_IRQ_LAST+5) /*0x1400-System Management */ -#define PPC_IRQ_LAST PPC_IRQ_SYS_MGT - - -#elif defined(ppc604) -#define PPC_IRQ_ADDR_BRK (PPC_STD_IRQ_LAST+1) /*0x1300- Inst. addr break */ -#define PPC_IRQ_SYS_MGT (PPC_STD_IRQ_LAST+2) /*0x1400- System Management */ -#define PPC_IRQ_LAST PPC604_IRQ_SYS_MGT - -#endif - -/* - * Machine Status Register (MSR) Constants Used by RTEMS - */ - -/* - * Some PPC model manuals refer to the Exception Prefix (EP) bit as - * IP for no apparent reason. - */ - -#define PPC_MSR_RI 0x000000002 /* bit 30 - recoverable exception */ -#define PPC_MSR_DR 0x000000010 /* bit 27 - data address translation */ -#define PPC_MSR_IR 0x000000020 /* bit 26 - instruction addr translation*/ - -#if (PPC_HAS_EXCEPTION_PREFIX) -#define PPC_MSR_EP 0x000000040 /* bit 25 - exception prefix */ -#else -#define PPC_MSR_EP 0x000000000 /* bit 25 - exception prefix */ -#endif - -#if (PPC_HAS_FPU) -#define PPC_MSR_FP 0x000002000 /* bit 18 - floating point enable */ -#else -#define PPC_MSR_FP 0x000000000 /* bit 18 - floating point enable */ -#endif - -#if (PPC_LOW_POWER_MODE == PPC_LOW_POWER_MODE_NONE) -#define PPC_MSR_POW 0x000000000 /* bit 13 - power management enable */ -#else -#define PPC_MSR_POW 0x000040000 /* bit 13 - power management enable */ -#endif - -/* - * Interrupt/exception MSR bits set as defined on p. 2-20 in "The Programming - * Environments" and the manuals for various PPC models. - */ - -#if (PPC_DEBUG_MODEL == PPC_DEBUG_MODEL_STANDARD) -#define PPC_MSR_DE 0x000000000 /* bit 22 - debug exception enable */ -#define PPC_MSR_BE 0x000000200 /* bit 22 - branch trace enable */ -#define PPC_MSR_SE 0x000000400 /* bit 21 - single step trace enable */ -#elif (PPC_DEBUG_MODEL == PPC_DEBUG_MODEL_SINGLE_STEP_ONLY) -#define PPC_MSR_DE 0x000000000 /* bit 22 - debug exception enable */ -#define PPC_MSR_BE 0x000000200 /* bit 22 - branch trace enable */ -#define PPC_MSR_SE 0x000000000 /* bit 21 - single step trace enable */ -#elif (PPC_DEBUG_MODEL == PPC_DEBUG_MODEL_IBM4xx) -#define PPC_MSR_DE 0x000000200 /* bit 22 - debug exception enable */ -#define PPC_MSR_BE 0x000000000 /* bit 22 - branch trace enable */ -#define PPC_MSR_SE 0x000000000 /* bit 21 - single step trace enable */ -#else -#error "MSR constants -- unknown PPC_DEBUG_MODEL!!" -#endif - -#define PPC_MSR_ME 0x000001000 /* bit 19 - machine check enable */ -#define PPC_MSR_EE 0x000008000 /* bit 16 - external interrupt enable */ - -#if (PPC_HAS_RFCI) -#define PPC_MSR_CE 0x000020000 /* bit 14 - critical interrupt enable */ -#else -#define PPC_MSR_CE 0x000000000 /* bit 14 - critical interrupt enable */ -#endif - -#define PPC_MSR_DISABLE_MASK (PPC_MSR_ME|PPC_MSR_EE|PPC_MSR_CE) - -/* - * Initial value for the FPSCR register - */ - -#define PPC_INIT_FPSCR 0x000000f8 - -#ifdef __cplusplus -} -#endif - -#endif /* ! _INCLUDE_PPC_h */ -/* end of include file */ - - diff --git a/c/src/exec/score/cpu/powerpc/ppctypes.h b/c/src/exec/score/cpu/powerpc/ppctypes.h deleted file mode 100644 index 71f1b814b2..0000000000 --- a/c/src/exec/score/cpu/powerpc/ppctypes.h +++ /dev/null @@ -1,74 +0,0 @@ -/* ppctypes.h - * - * This include file contains type definitions pertaining to the PowerPC - * processor family. - * - * Author: Andrew Bray <andy@i-cubed.co.uk> - * - * COPYRIGHT (c) 1995 by i-cubed ltd. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of i-cubed limited not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * i-cubed limited makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/cpu/no_cpu/no_cputypes.h: - * - * COPYRIGHT (c) 1989-1997. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may in - * the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __PPC_TYPES_h -#define __PPC_TYPES_h - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section defines the basic types for this processor. - */ - -typedef unsigned char unsigned8; /* unsigned 8-bit integer */ -typedef unsigned short unsigned16; /* unsigned 16-bit integer */ -typedef unsigned int unsigned32; /* unsigned 32-bit integer */ -typedef unsigned long long unsigned64; /* unsigned 64-bit integer */ - -typedef unsigned32 Priority_Bit_map_control; - -typedef signed char signed8; /* 8-bit signed integer */ -typedef signed short signed16; /* 16-bit signed integer */ -typedef signed int signed32; /* 32-bit signed integer */ -typedef signed long long signed64; /* 64 bit signed integer */ - -typedef unsigned32 boolean; /* Boolean value */ - -typedef float single_precision; /* single precision float */ -typedef double double_precision; /* double precision float */ - -typedef void ppc_isr; -typedef void ( *ppc_isr_entry )( int, struct CPU_Interrupt_frame * ); - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/powerpc/rtems.s b/c/src/exec/score/cpu/powerpc/rtems.s deleted file mode 100644 index b653152411..0000000000 --- a/c/src/exec/score/cpu/powerpc/rtems.s +++ /dev/null @@ -1,132 +0,0 @@ -/* rtems.s - * - * This file contains the single entry point code for - * the PowerPC implementation of RTEMS. - * - * Author: Andrew Bray <andy@i-cubed.co.uk> - * - * COPYRIGHT (c) 1995 by i-cubed ltd. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of i-cubed limited not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * i-cubed limited makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/cpu/no_cpu/rtems.c: - * - * COPYRIGHT (c) 1989-1997. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may in - * the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <asm.h> - - BEGIN_CODE -/* - * RTEMS - * - * This routine jumps to the directive indicated in r11. - * This routine is used when RTEMS is linked by itself and placed - * in ROM. This routine is the first address in the ROM space for - * RTEMS. The user "calls" this address with the directive arguments - * in the normal place. - * This routine then jumps indirectly to the correct directive - * preserving the arguments. The directive should not realize - * it has been "wrapped" in this way. The table "_Entry_points" - * is used to look up the directive. - */ - - ALIGN (4, 2) - PUBLIC_PROC (RTEMS) -PROC (RTEMS): -#if (PPC_ABI == PPC_ABI_POWEROPEN) - mflr r0 - stw r0, 8(r1) - stwu r1, -64(r1) - - /* Establish addressing */ - bl base -base: - mflr r12 - addi r12, r12, tabaddr - base - - lwz r12, Entry_points-abase(r12) - slwi r11, r11, 2 - lwzx r12, r12, r11 - - stw r2, 56(r1) - lwz r0, 0(r12) - mtlr r0 - lwz r2, 4(r12) - lwz r11, 8(r12) - blrl - lwz r2, 56(r1) - addi r1, r1, 64 - lwz r0, 8(r1) - mtlr r0 -#else - mflr r0 - stw r0, 4(r1) - stwu r1, -16(r1) - - /* Establish addressing */ - bl base -base: - mflr r12 - addi r12, r12, tabaddr - base - - lwz r12, Entry_points-abase(r12) - slwi r11, r11, 2 - lwzx r11, r12, r11 - - stw r2, 8(r1) -#if (PPC_ABI != PPC_ABI_GCC27) - stw r13, 12(r1) -#endif - mtlr r11 - lwz r11, irqinfo-abase(r12) - lwz r2, 0(r11) -#if (PPC_ABI != PPC_ABI_GCC27) - lwz r13, 4(r11) -#endif - blrl - lwz r2, 8(r1) -#if (PPC_ABI != PPC_ABI_GCC27) - lwz r13, 12(r1) -#endif - addi r1, r1, 16 - lwz r0, 4(r1) - mtlr r0 -#endif - blr - - - /* Addressability stuff */ -tabaddr: -abase: - EXTERN_VAR (_Entry_points) -Entry_points: - EXT_SYM_REF (_Entry_points) -#if (PPC_ABI != PPC_ABI_POWEROPEN) - EXTERN_VAR (_CPU_IRQ_info) -irqinfo: - EXT_SYM_REF (_CPU_IRQ_info) -#endif - -#if (PPC_ABI == PPC_ABI_POWEROPEN) - DESCRIPTOR (RTEMS) -#endif - - diff --git a/c/src/exec/score/cpu/sh/Makefile.in b/c/src/exec/score/cpu/sh/Makefile.in deleted file mode 100644 index 54e1ed15ec..0000000000 --- a/c/src/exec/score/cpu/sh/Makefile.in +++ /dev/null @@ -1,87 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - -RELS=$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -C_PIECES=cpu cpu_asm cpu_isps rtems -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) - -H_FILES= \ - $(srcdir)/cpu.h \ - $(srcdir)/shtypes.h \ - $(srcdir)/sh.h \ - $(srcdir)/sh_io.h \ - $(srcdir)/cpu_isps.h \ - $(srcdir)/iosh7030.h - -# H_FILES that get installed externally -EXTERNAL_H_FILES = \ - $(srcdir)/asm.h - -# Assembly source names, if any, go here -- minus the .s -# Normally cpu_asm and rtems are assembly files -S_PIECES= -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) - -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(RELS) - -$(ARCH)/rtems-cpu.rel: $(OBJS) - $(make-rel) - -# Install the program(s), appending _g or _p as appropriate. -# for include files, just use $(INSTALL) -install: all - -preinstall: $(ARCH) $(PROJECT_INCLUDE)/rtems/score/targopts.h \ - ${PROJECT_RELEASE}/lib/bsp_specs - $(INSTALL) -m 444 ${H_FILES} $(PROJECT_INCLUDE)/rtems/score -# we will share the basic cpu file - $(INSTALL) -m 444 ${EXTERNAL_H_FILES} $(PROJECT_INCLUDE) - -$(PROJECT_INCLUDE)/rtems/score/targopts.h: $(ARCH)/targopts.h-tmp - $(INSTALL) -m 444 $(ARCH)/targopts.h-tmp $@ - -# $(ARCH)/targopts.h-tmp rule is in leaf.cfg - -${PROJECT_RELEASE}/lib/bsp_specs: $(ARCH)/bsp_specs.tmp - $(INSTALL) -m 444 $(ARCH)/bsp_specs.tmp $@ - -# $(ARCH)/bsp_specs.tmp rule is in leaf.cfg diff --git a/c/src/exec/score/cpu/sh/asm.h b/c/src/exec/score/cpu/sh/asm.h deleted file mode 100644 index f6fff9f40e..0000000000 --- a/c/src/exec/score/cpu/sh/asm.h +++ /dev/null @@ -1,137 +0,0 @@ -/* asm.h - * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. - * - * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and - * Bernd Becker (becker@faw.uni-ulm.de) - * - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - * - * COPYRIGHT: - * - * This file is based on similar code found in newlib available - * from ftp.cygnus.com. The file which was used had no copyright - * notice. This file is freely distributable as long as the source - * of the file is noted. This file is: - * - * - * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * - * COPYRIGHT (c) 1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __CPU_SH_ASM_h -#define __CPU_SH_ASM_h - -/* - * Indicate we are in an assembly file and get the basic CPU definitions. - */ - -#ifndef ASM -#define ASM -#endif - -#include <rtems/score/targopts.h> -#include <rtems/score/sh.h> - -/* - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. - */ - -#ifndef __USER_LABEL_PREFIX__ -#define __USER_LABEL_PREFIX__ _ -#endif - -#ifndef __REGISTER_PREFIX__ -#define __REGISTER_PREFIX__ -#endif - -/* ANSI concatenation macros. */ - -#define CONCAT1(a, b) CONCAT2(a, b) -#define CONCAT2(a, b) a ## b - -/* Use the right prefix for global labels. */ - -#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) - -/* Use the right prefix for registers. */ - -#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) - -/* - * define macros for all of the registers on this CPU - * - * EXAMPLE: #define d0 REG (d0) - */ -#define r0 REG (r0) -#define r1 REG (r1) -#define r2 REG (r2) -#define r3 REG (r3) -#define r4 REG (r4) -#define r5 REG (r5) -#define r6 REG (r6) -#define r7 REG (r7) -#define r8 REG (r8) -#define r9 REG (r9) -#define r10 REG (r10) -#define r11 REG (r11) -#define r12 REG (r12) -#define r13 REG (r13) -#define r14 REG (r14) -#define r15 REG (r15) -#define vbr REG (vbr) -#define gbr REG (gbr) -#define pr REG (pr) -#define mach REG (mach) -#define macl REG (macl) -#define sr REG (sr) -#define pc REG (pc) - -/* - * Define macros to handle section beginning and ends. - */ - - -#define BEGIN_CODE_DCL .text -#define END_CODE_DCL -#define BEGIN_DATA_DCL .data -#define END_DATA_DCL -#define BEGIN_CODE .text -#define END_CODE -#define BEGIN_DATA -#define END_DATA -#define BEGIN_BSS -#define END_BSS -#define END - -/* - * Following must be tailor for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. - */ - -#define PUBLIC(sym) .global SYM (sym) -#define EXTERN(sym) .global SYM (sym) - -#endif diff --git a/c/src/exec/score/cpu/sh/cpu.c b/c/src/exec/score/cpu/sh/cpu.c deleted file mode 100644 index cc07552cf0..0000000000 --- a/c/src/exec/score/cpu/sh/cpu.c +++ /dev/null @@ -1,232 +0,0 @@ -/* - * This file contains information pertaining to the Hitachi SH - * processor. - * - * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and - * Bernd Becker (becker@faw.uni-ulm.de) - * - * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * - * COPYRIGHT (c) 1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/score/isr.h> -#include <rtems/score/sh_io.h> -#include <rtems/score/cpu.h> -#include <rtems/score/sh.h> - - -/* referenced in start.s */ -extern proc_ptr vectab[] ; - -proc_ptr vectab[256] ; - -extern proc_ptr _Hardware_isr_Table[]; - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: - * cpu_table - CPU table to initialize - * thread_dispatch - address of disptaching routine - */ - - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) /* ignored on this CPU */ -) -{ - register unsigned32 level = 0; - - /* - * The thread_dispatch argument is the address of the entry point - * for the routine called at the end of an ISR once it has been - * decided a context switch is necessary. On some compilation - * systems it is difficult to call a high-level language routine - * from assembly. This allows us to trick these systems. - * - * If you encounter this problem save the entry point in a CPU - * dependent variable. - */ - - _CPU_Thread_dispatch_pointer = thread_dispatch; - - /* - * If there is not an easy way to initialize the FP context - * during Context_Initialize, then it is usually easier to - * save an "uninitialized" FP context here and copy it to - * the task's during Context_Initialize. - */ - - /* FP context initialization support goes here */ - - _CPU_Table = *cpu_table; - - /* enable interrupts */ - _CPU_ISR_Set_level( level); -} - -/*PAGE - * - * _CPU_ISR_Get_level - */ - -unsigned32 _CPU_ISR_Get_level( void ) -{ - /* - * This routine returns the current interrupt level. - */ - - register unsigned32 _mask ; - - sh_get_interrupt_level( _mask ); - - return ( _mask); -} - -/*PAGE - * - * _CPU_ISR_install_raw_handler - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - /* - * This is where we install the interrupt handler into the "raw" interrupt - * table used by the CPU to dispatch interrupt handlers. - */ - volatile proc_ptr *vbr ; - -#if SH_PARANOID_ISR - unsigned32 level ; - - sh_disable_interrupts( level ); -#endif - - /* get vbr */ - asm ( "stc vbr,%0" : "=r" (vbr) ); - - *old_handler = vbr[vector] ; - vbr[vector] = new_handler ; - -#if SH_PARANOID_ISR - sh_enable_interrupts( level ); -#endif -} - - -/*PAGE - * - * _CPU_ISR_install_vector - * - * This kernel routine installs the RTEMS handler for the - * specified vector. - * - * Input parameters: - * vector - interrupt vector number - * old_handler - former ISR for this vector number - * new_handler - replacement ISR for this vector number - * - * Output parameters: NONE - * - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - proc_ptr ignored ; - - if(( vector <= 113) && ( vector >= 11)) - { - *old_handler = _ISR_Vector_table[ vector ]; - - /* - * If the interrupt vector table is a table of pointer to isr entry - * points, then we need to install the appropriate RTEMS interrupt - * handler for this vector number. - */ - _CPU_ISR_install_raw_handler(vector, - _Hardware_isr_Table[vector], - &ignored ); - - /* - * We put the actual user ISR address in '_ISR_Vector_table'. - * This will be used by __ISR_Handler so the user gets control. - */ - - _ISR_Vector_table[ vector ] = new_handler; - } -} - -/*PAGE - * - * _CPU_Thread_Idle_body - * - * NOTES: - * - * 1. This is the same as the regular CPU independent algorithm. - * - * 2. If you implement this using a "halt", "idle", or "shutdown" - * instruction, then don't forget to put it in an infinite loop. - * - * 3. Be warned. Some processors with onboard DMA have been known - * to stop the DMA if the CPU were put in IDLE mode. This might - * also be a problem with other on-chip peripherals. So use this - * hook with caution. - */ - -#if (CPU_PROVIDES_IDLE_THREAD_BODY == TRUE) -void _CPU_Thread_Idle_body( void ) -{ - - for( ; ; ) - { - asm volatile("nop"); - } - /* insert your "halt" instruction here */ ; -} -#endif - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -unsigned8 _bit_set_table[16] = - { 4, 4, 4, 4, 4, 4, 4, 4, 3, 3, 3, 3, 2, 2, 1,0}; - - -#endif - -void _CPU_Context_Initialize( - Context_Control *_the_context, - void *_stack_base, - unsigned32 _size, - unsigned32 _isr, - void (*_entry_point)(void), - int _is_fp ) -{ - _the_context->r15 = (unsigned32*) ((unsigned32) (_stack_base) + (_size) ); - _the_context->sr = (_isr << 4) & 0x00f0 ; - _the_context->pr = (unsigned32*) _entry_point ; -} diff --git a/c/src/exec/score/cpu/sh/cpu.h b/c/src/exec/score/cpu/sh/cpu.h deleted file mode 100644 index 0a67679b5e..0000000000 --- a/c/src/exec/score/cpu/sh/cpu.h +++ /dev/null @@ -1,875 +0,0 @@ -/* - * This include file contains information pertaining to the Hitachi SH - * processor. - * - * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and - * Bernd Becker (becker@faw.uni-ulm.de) - * - * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * - * COPYRIGHT (c) 1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef _SH_CPU_h -#define _SH_CPU_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/score/sh.h> /* pick up machine definitions */ -#ifndef ASM -#include <rtems/score/shtypes.h> -#endif - -/* conditional compilation parameters */ - -/* - * Should the calls to _Thread_Enable_dispatch be inlined? - * - * If TRUE, then they are inlined. - * If FALSE, then a subroutine call is made. - * - * Basically this is an example of the classic trade-off of size - * versus speed. Inlining the call (TRUE) typically increases the - * size of RTEMS while speeding up the enabling of dispatching. - * [NOTE: In general, the _Thread_Dispatch_disable_level will - * only be 0 or 1 unless you are in an interrupt handler and that - * interrupt handler invokes the executive.] When not inlined - * something calls _Thread_Enable_dispatch which in turns calls - * _Thread_Dispatch. If the enable dispatch is inlined, then - * one subroutine call is avoided entirely.] - */ - -#define CPU_INLINE_ENABLE_DISPATCH FALSE - -/* - * Should the body of the search loops in _Thread_queue_Enqueue_priority - * be unrolled one time? In unrolled each iteration of the loop examines - * two "nodes" on the chain being searched. Otherwise, only one node - * is examined per iteration. - * - * If TRUE, then the loops are unrolled. - * If FALSE, then the loops are not unrolled. - * - * The primary factor in making this decision is the cost of disabling - * and enabling interrupts (_ISR_Flash) versus the cost of rest of the - * body of the loop. On some CPUs, the flash is more expensive than - * one iteration of the loop body. In this case, it might be desirable - * to unroll the loop. It is important to note that on some CPUs, this - * code is the longest interrupt disable period in RTEMS. So it is - * necessary to strike a balance when setting this parameter. - */ - -#define CPU_UNROLL_ENQUEUE_PRIORITY TRUE - -/* - * Does RTEMS manage a dedicated interrupt stack in software? - * - * If TRUE, then a stack is allocated in _Interrupt_Manager_initialization. - * If FALSE, nothing is done. - * - * If the CPU supports a dedicated interrupt stack in hardware, - * then it is generally the responsibility of the BSP to allocate it - * and set it up. - * - * If the CPU does not support a dedicated interrupt stack, then - * the porter has two options: (1) execute interrupts on the - * stack of the interrupted task, and (2) have RTEMS manage a dedicated - * interrupt stack. - * - * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - */ - -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK TRUE -#define CPU_HAS_HARDWARE_INTERRUPT_STACK FALSE - -/* - * We define the interrupt stack in the linker script - */ -#define CPU_ALLOCATE_INTERRUPT_STACK FALSE - -/* - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? - */ - -#define CPU_ISR_PASSES_FRAME_POINTER 0 - -/* - * Does the CPU have hardware floating point? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored. - * - * We currently support sh1 only, which has no FPU, other SHes have an FPU - * - * The macro name "NO_CPU_HAS_FPU" should be made CPU specific. - * It indicates whether or not this CPU model has FP support. For - * example, it would be possible to have an i386_nofp CPU model - * which set this to false to indicate that you have an i386 without - * an i387 and wish to leave floating point support out of RTEMS. - */ - -#define CPU_HARDWARE_FP FALSE - -/* - * Are all tasks RTEMS_FLOATING_POINT tasks implicitly? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed. - * - * So far, the only CPU in which this option has been used is the - * HP PA-RISC. The HP C compiler and gcc both implicitly use the - * floating point registers to perform integer multiplies. If - * a function which you would not think utilize the FP unit DOES, - * then one can not easily predict which tasks will use the FP hardware. - * In this case, this option should be TRUE. - * - * If CPU_HARDWARE_FP is FALSE, then this should be FALSE as well. - */ - -#define CPU_ALL_TASKS_ARE_FP FALSE - -/* - * Should the IDLE task have a floating point context? - * - * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task - * and it has a floating point context which is switched in and out. - * If FALSE, then the IDLE task does not have a floating point context. - * - * Setting this to TRUE negatively impacts the time required to preempt - * the IDLE task from an interrupt because the floating point context - * must be saved as part of the preemption. - */ - -#define CPU_IDLE_TASK_IS_FP FALSE - -/* - * Should the saving of the floating point registers be deferred - * until a context switch is made to another different floating point - * task? - * - * If TRUE, then the floating point context will not be stored until - * necessary. It will remain in the floating point registers and not - * disturned until another floating point task is switched to. - * - * If FALSE, then the floating point context is saved when a floating - * point task is switched out and restored when the next floating point - * task is restored. The state of the floating point registers between - * those two operations is not specified. - * - * If the floating point context does NOT have to be saved as part of - * interrupt dispatching, then it should be safe to set this to TRUE. - * - * Setting this flag to TRUE results in using a different algorithm - * for deciding when to save and restore the floating point context. - * The deferred FP switch algorithm minimizes the number of times - * the FP context is saved and restored. The FP context is not saved - * until a context switch is made to another, different FP task. - * Thus in a system with only one FP task, the FP context will never - * be saved or restored. - */ - -#define CPU_USE_DEFERRED_FP_SWITCH TRUE - -/* - * Does this port provide a CPU dependent IDLE task implementation? - * - * If TRUE, then the routine _CPU_Thread_Idle_body - * must be provided and is the default IDLE thread body instead of - * _CPU_Thread_Idle_body. - * - * If FALSE, then use the generic IDLE thread body if the BSP does - * not provide one. - * - * This is intended to allow for supporting processors which have - * a low power or idle mode. When the IDLE thread is executed, then - * the CPU can be powered down. - * - * The order of precedence for selecting the IDLE thread body is: - * - * 1. BSP provided - * 2. CPU dependent (if provided) - * 3. generic (if no BSP and no CPU dependent) - */ - -#define CPU_PROVIDES_IDLE_THREAD_BODY TRUE - -/* - * Does the stack grow up (toward higher addresses) or down - * (toward lower addresses)? - * - * If TRUE, then the grows upward. - * If FALSE, then the grows toward smaller addresses. - */ - -#define CPU_STACK_GROWS_UP FALSE - -/* - * The following is the variable attribute used to force alignment - * of critical RTEMS structures. On some processors it may make - * sense to have these aligned on tighter boundaries than - * the minimum requirements of the compiler in order to have as - * much of the critical data area as possible in a cache line. - * - * The placement of this macro in the declaration of the variables - * is based on the syntactically requirements of the GNU C - * "__attribute__" extension. For example with GNU C, use - * the following to force a structures to a 32 byte boundary. - * - * __attribute__ ((aligned (32))) - * - * NOTE: Currently only the Priority Bit Map table uses this feature. - * To benefit from using this, the data must be heavily - * used so it will stay in the cache and used frequently enough - * in the executive to justify turning this on. - */ - -#define CPU_STRUCTURE_ALIGNMENT __attribute__ ((aligned(16))) - -/* - * Define what is required to specify how the network to host conversion - * routines are handled. - * - * NOTE: SHes can be big or little endian, the default is big endian - */ - -#define CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE - -/* __LITTLE_ENDIAN__ is defined if -ml is given to gcc */ -#if defined(__LITTLE_ENDIAN__) -#define CPU_BIG_ENDIAN FALSE -#define CPU_LITTLE_ENDIAN TRUE -#else -#define CPU_BIG_ENDIAN TRUE -#define CPU_LITTLE_ENDIAN FALSE -#endif - -/* - * The following defines the number of bits actually used in the - * interrupt field of the task mode. How those bits map to the - * CPU interrupt levels is defined by the routine _CPU_ISR_Set_level(). - */ - -#define CPU_MODES_INTERRUPT_MASK 0x0000000f - -/* - * Processor defined structures - * - * Examples structures include the descriptor tables from the i386 - * and the processor control structure on the i960ca. - */ - -/* may need to put some structures here. */ - -/* - * Contexts - * - * Generally there are 2 types of context to save. - * 1. Interrupt registers to save - * 2. Task level registers to save - * - * This means we have the following 3 context items: - * 1. task level context stuff:: Context_Control - * 2. floating point task stuff:: Context_Control_fp - * 3. special interrupt level context :: Context_Control_interrupt - * - * On some processors, it is cost-effective to save only the callee - * preserved registers during a task context switch. This means - * that the ISR code needs to save those registers which do not - * persist across function calls. It is not mandatory to make this - * distinctions between the caller/callee saves registers for the - * purpose of minimizing context saved during task switch and on interrupts. - * If the cost of saving extra registers is minimal, simplicity is the - * choice. Save the same context on interrupt entry as for tasks in - * this case. - * - * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then - * care should be used in designing the context area. - * - * On some CPUs with hardware floating point support, the Context_Control_fp - * structure will not be used or it simply consist of an array of a - * fixed number of bytes. This is done when the floating point context - * is dumped by a "FP save context" type instruction and the format - * is not really defined by the CPU. In this case, there is no need - * to figure out the exact format -- only the size. Of course, although - * this is enough information for RTEMS, it is probably not enough for - * a debugger such as gdb. But that is another problem. - */ - -typedef struct { - unsigned32 *r15; /* stack pointer */ - - unsigned32 macl; - unsigned32 mach; - unsigned32 *pr; - - unsigned32 *r14; /* frame pointer/call saved */ - - unsigned32 r13; /* call saved */ - unsigned32 r12; /* call saved */ - unsigned32 r11; /* call saved */ - unsigned32 r10; /* call saved */ - unsigned32 r9; /* call saved */ - unsigned32 r8; /* call saved */ - - unsigned32 *r7; /* arg in */ - unsigned32 *r6; /* arg in */ - -#if 0 - unsigned32 *r5; /* arg in */ - unsigned32 *r4; /* arg in */ -#endif - - unsigned32 *r3; /* scratch */ - unsigned32 *r2; /* scratch */ - unsigned32 *r1; /* scratch */ - - unsigned32 *r0; /* arg return */ - - unsigned32 gbr; - unsigned32 sr; - -} Context_Control; - -typedef struct { -} Context_Control_fp; - -typedef struct { -} CPU_Interrupt_frame; - - -/* - * The following table contains the information required to configure - * the SH processor specific parameters. - */ - -typedef struct { - void (*pretasking_hook)( void ); - void (*predriver_hook)( void ); - void (*postdriver_hook)( void ); - void (*idle_task)( void ); - boolean do_zero_of_workspace; - unsigned32 idle_task_stack_size; - unsigned32 interrupt_stack_size; - unsigned32 extra_mpci_receive_server_stack; - void * (*stack_allocate_hook)( unsigned32 ); - void (*stack_free_hook)( void* ); - /* end of fields required on all CPUs */ -} rtems_cpu_table; - -/* - * This variable is optional. It is used on CPUs on which it is difficult - * to generate an "uninitialized" FP context. It is filled in by - * _CPU_Initialize and copied into the task's FP context area during - * _CPU_Context_Initialize. - */ - -/* -SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context; -*/ - -/* - * On some CPUs, RTEMS supports a software managed interrupt stack. - * This stack is allocated by the Interrupt Manager and the switch - * is performed in _ISR_Handler. These variables contain pointers - * to the lowest and highest addresses in the chunk of memory allocated - * for the interrupt stack. Since it is unknown whether the stack - * grows up or down (in general), this give the CPU dependent - * code the option of picking the version it wants to use. - * - * NOTE: These two variables are required if the macro - * CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE. - */ - -SCORE_EXTERN void *_CPU_Interrupt_stack_low; -SCORE_EXTERN void *_CPU_Interrupt_stack_high; - -/* - * With some compilation systems, it is difficult if not impossible to - * call a high-level language routine from assembly language. This - * is especially true of commercial Ada compilers and name mangling - * C++ ones. This variable can be optionally defined by the CPU porter - * and contains the address of the routine _Thread_Dispatch. This - * can make it easier to invoke that routine at the end of the interrupt - * sequence (if a dispatch is necessary). - */ - -SCORE_EXTERN void (*_CPU_Thread_dispatch_pointer)(); - -/* - * Nothing prevents the porter from declaring more CPU specific variables. - */ - -/* XXX: if needed, put more variables here */ - -/* - * The size of the floating point context area. On some CPUs this - * will not be a "sizeof" because the format of the floating point - * area is not defined -- only the size is. This is usually on - * CPUs with a "floating point save context" instruction. - */ - -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) - -/* - * Amount of extra stack (above minimum stack size) required by - * MPCI receive server thread. Remember that in a multiprocessor - * system this thread must exist and be able to process all directives. - */ - -#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0 - -/* - * This defines the number of entries in the ISR_Vector_table managed - * by RTEMS. - */ - -#define CPU_INTERRUPT_NUMBER_OF_VECTORS 256 -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) - -/* - * Should be large enough to run all RTEMS tests. This insures - * that a "reasonable" small application should not have any problems. - * - * We have been able to run the sptests with this value, but have not - * been able to run the tmtest suite. - */ - -#define CPU_STACK_MINIMUM_SIZE 4096 - -/* - * CPU's worst alignment requirement for data types on a byte boundary. This - * alignment does not take into account the requirements for the stack. - */ - -#define CPU_ALIGNMENT 4 - -/* - * This number corresponds to the byte alignment requirement for the - * heap handler. This alignment requirement may be stricter than that - * for the data types alignment specified by CPU_ALIGNMENT. It is - * common for the heap to follow the same alignment requirement as - * CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict enough for the heap, - * then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for memory - * buffers allocated by the partition manager. This alignment requirement - * may be stricter than that for the data types alignment specified by - * CPU_ALIGNMENT. It is common for the partition to follow the same - * alignment requirement as CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict - * enough for the partition, then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for the - * stack. This alignment requirement may be stricter than that for the - * data types alignment specified by CPU_ALIGNMENT. If the CPU_ALIGNMENT - * is strict enough for the stack, then this should be set to 0. - * - * NOTE: This must be a power of 2 either 0 or greater than CPU_ALIGNMENT. - */ - -#define CPU_STACK_ALIGNMENT CPU_ALIGNMENT - -/* ISR handler macros */ - -/* - * Disable all interrupts for an RTEMS critical section. The previous - * level is returned in _level. - */ - -#define _CPU_ISR_Disable( _level) \ - sh_disable_interrupts( _level ) - -/* - * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). - * This indicates the end of an RTEMS critical section. The parameter - * _level is not modified. - */ - -#define _CPU_ISR_Enable( _level) \ - sh_enable_interrupts( _level) - -/* - * This temporarily restores the interrupt to _level before immediately - * disabling them again. This is used to divide long RTEMS critical - * sections into two or more parts. The parameter _level is not - * modified. - */ - -#define _CPU_ISR_Flash( _level) \ - sh_flash_interrupts( _level) - -/* - * Map interrupt level in task mode onto the hardware that the CPU - * actually provides. Currently, interrupt levels which do not - * map onto the CPU in a generic fashion are undefined. Someday, - * it would be nice if these were "mapped" by the application - * via a callout. For example, m68k has 8 levels 0 - 7, levels - * 8 - 255 would be available for bsp/application specific meaning. - * This could be used to manage a programmable interrupt controller - * via the rtems_task_mode directive. - */ - -#define _CPU_ISR_Set_level( _newlevel) \ - sh_set_interrupt_level(_newlevel) - -unsigned32 _CPU_ISR_Get_level( void ); - -/* end of ISR handler macros */ - -/* Context handler macros */ - -/* - * Initialize the context to a state suitable for starting a - * task after a context restore operation. Generally, this - * involves: - * - * - setting a starting address - * - preparing the stack - * - preparing the stack and frame pointers - * - setting the proper interrupt level in the context - * - initializing the floating point context - * - * This routine generally does not set any unnecessary register - * in the context. The state of the "general data" registers is - * undefined at task start time. - * - * NOTE: This is_fp parameter is TRUE if the thread is to be a floating - * point thread. This is typically only used on CPUs where the - * FPU may be easily disabled by software such as on the SPARC - * where the PSR contains an enable FPU bit. - */ - -/* - * FIXME: defined as a function for debugging - should be a macro - */ -SCORE_EXTERN void _CPU_Context_Initialize( - Context_Control *_the_context, - void *_stack_base, - unsigned32 _size, - unsigned32 _isr, - void (*_entry_point)(void), - int _is_fp ); - -/* - * This routine is responsible for somehow restarting the currently - * executing task. If you are lucky, then all that is necessary - * is restoring the context. Otherwise, there will need to be - * a special assembly routine which does something special in this - * case. Context_Restore should work most of the time. It will - * not work if restarting self conflicts with the stack frame - * assumptions of restoring a context. - */ - -#define _CPU_Context_Restart_self( _the_context ) \ - _CPU_Context_restore( (_the_context) ); - -/* - * The purpose of this macro is to allow the initial pointer into - * a floating point context area (used to save the floating point - * context) to be at an arbitrary place in the floating point - * context area. - * - * This is necessary because some FP units are designed to have - * their context saved as a stack which grows into lower addresses. - * Other FP units can be saved by simply moving registers into offsets - * from the base of the context area. Finally some FP units provide - * a "dump context" instruction which could fill in from high to low - * or low to high based on the whim of the CPU designers. - */ - -#define _CPU_Context_Fp_start( _base, _offset ) \ - ( (void *) _Addresses_Add_offset( (_base), (_offset) ) ) - -/* - * This routine initializes the FP context area passed to it to. - * There are a few standard ways in which to initialize the - * floating point context. The code included for this macro assumes - * that this is a CPU in which a "initial" FP context was saved into - * _CPU_Null_fp_context and it simply copies it to the destination - * context passed to it. - * - * Other models include (1) not doing anything, and (2) putting - * a "null FP status word" in the correct place in the FP context. - * SH has no FPU !!!!!!!!!!!! - */ - -#define _CPU_Context_Initialize_fp( _destination ) \ - { } - -/* end of Context handler macros */ - -/* Fatal Error manager macros */ - -/* - * FIXME: Trap32 ??? - * - * This routine copies _error into a known place -- typically a stack - * location or a register, optionally disables interrupts, and - * invokes a Trap32 Instruction which returns to the breakpoint - * routine of cmon. - */ - -#ifdef BSP_FATAL_HALT - /* we manage the fatal error in the board support package */ - void bsp_fatal_halt( unsigned32 _error); -#define _CPU_Fatal_halt( _error ) bsp_fatal_halt( _error) -#else -#define _CPU_Fatal_halt( _error)\ -{ \ - asm volatile("mov.l %0,r0"::"m" (_error)); \ - asm volatile("trapa #34"); \ -} -#endif - -/* end of Fatal Error manager macros */ - -/* Bitfield handler macros */ - -/* - * This routine sets _output to the bit number of the first bit - * set in _value. _value is of CPU dependent type Priority_Bit_map_control. - * This type may be either 16 or 32 bits wide although only the 16 - * least significant bits will be used. - * - * There are a number of variables in using a "find first bit" type - * instruction. - * - * (1) What happens when run on a value of zero? - * (2) Bits may be numbered from MSB to LSB or vice-versa. - * (3) The numbering may be zero or one based. - * (4) The "find first bit" instruction may search from MSB or LSB. - * - * RTEMS guarantees that (1) will never happen so it is not a concern. - * (2),(3), (4) are handled by the macros _CPU_Priority_mask() and - * _CPU_Priority_bits_index(). These three form a set of routines - * which must logically operate together. Bits in the _value are - * set and cleared based on masks built by _CPU_Priority_mask(). - * The basic major and minor values calculated by _Priority_Major() - * and _Priority_Minor() are "massaged" by _CPU_Priority_bits_index() - * to properly range between the values returned by the "find first bit" - * instruction. This makes it possible for _Priority_Get_highest() to - * calculate the major and directly index into the minor table. - * This mapping is necessary to ensure that 0 (a high priority major/minor) - * is the first bit found. - * - * This entire "find first bit" and mapping process depends heavily - * on the manner in which a priority is broken into a major and minor - * components with the major being the 4 MSB of a priority and minor - * the 4 LSB. Thus (0 << 4) + 0 corresponds to priority 0 -- the highest - * priority. And (15 << 4) + 14 corresponds to priority 254 -- the next - * to the lowest priority. - * - * If your CPU does not have a "find first bit" instruction, then - * there are ways to make do without it. Here are a handful of ways - * to implement this in software: - * - * - a series of 16 bit test instructions - * - a "binary search using if's" - * - _number = 0 - * if _value > 0x00ff - * _value >>=8 - * _number = 8; - * - * if _value > 0x0000f - * _value >=8 - * _number += 4 - * - * _number += bit_set_table[ _value ] - * - * where bit_set_table[ 16 ] has values which indicate the first - * bit set - */ - -#define CPU_USE_GENERIC_BITFIELD_CODE TRUE -#define CPU_USE_GENERIC_BITFIELD_DATA TRUE - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -extern unsigned8 _bit_set_table[]; - -#define _CPU_Bitfield_Find_first_bit( _value, _output ) \ - { \ - _output = 0;\ - if(_value > 0x00ff) \ - { _value >>= 8; _output = 8; } \ - if(_value > 0x000f) \ - { _output += 4; _value >>= 4; } \ - _output += _bit_set_table[ _value]; } - -#endif - -/* end of Bitfield handler macros */ - -/* - * This routine builds the mask which corresponds to the bit fields - * as searched by _CPU_Bitfield_Find_first_bit(). See the discussion - * for that routine. - */ - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Priority_Mask( _bit_number ) \ - ( 1 << (_bit_number) ) - -#endif - -/* - * This routine translates the bit numbers returned by - * _CPU_Bitfield_Find_first_bit() into something suitable for use as - * a major or minor component of a priority. See the discussion - * for that routine. - */ - -#if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) - -#define _CPU_Priority_bits_index( _priority ) \ - (_priority) - -#endif - -/* end of Priority handler macros */ - -/* functions */ - -/* - * _CPU_Initialize - * - * This routine performs CPU dependent initialization. - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) -); - -/* - * _CPU_ISR_install_raw_handler - * - * This routine installs a "raw" interrupt handler directly into the - * processor's vector table. - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_ISR_install_vector - * - * This routine installs an interrupt vector. - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_Install_interrupt_stack - * - * This routine installs the hardware interrupt stack pointer. - * - * NOTE: It needs only be provided if CPU_HAS_HARDWARE_INTERRUPT_STACK - * is TRUE. - */ - -void _CPU_Install_interrupt_stack( void ); - -/* - * _CPU_Thread_Idle_body - * - * This routine is the CPU dependent IDLE thread body. - * - * NOTE: It need only be provided if CPU_PROVIDES_IDLE_THREAD_BODY - * is TRUE. - */ - -void _CPU_Thread_Idle_body( void ); - -/* - * _CPU_Context_switch - * - * This routine switches from the run context to the heir context. - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/* - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner. It may simply be a label in _CPU_Context_switch. - */ - -void _CPU_Context_restore( - Context_Control *new_context -); - -/* - * _CPU_Context_save_fp - * - * This routine saves the floating point context passed to it. - */ - -void _CPU_Context_save_fp( - void **fp_context_ptr -); - -/* - * _CPU_Context_restore_fp - * - * This routine restores the floating point context passed to it. - */ - -void _CPU_Context_restore_fp( - void **fp_context_ptr -); - - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/c/src/exec/score/cpu/sh/cpu_asm.c b/c/src/exec/score/cpu/sh/cpu_asm.c deleted file mode 100644 index 42764f6eb1..0000000000 --- a/c/src/exec/score/cpu/sh/cpu_asm.c +++ /dev/null @@ -1,311 +0,0 @@ -/* - * This file contains the basic algorithms for all assembly code used - * in an specific CPU port of RTEMS. These algorithms must be implemented - * in assembly language - * - * NOTE: This port uses a C file with inline assembler instructions - * - * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and - * Bernd Becker (becker@faw.uni-ulm.de) - * - * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * - * COPYRIGHT (c) 1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - */ - -/* - * This is supposed to be an assembly file. This means that system.h - * and cpu.h should not be included in a "real" cpu_asm file. An - * implementation in assembly should include "cpu_asm.h" - */ - -#include <rtems/system.h> -#include <rtems/score/cpu.h> -#include <rtems/score/isr.h> -#include <rtems/score/thread.h> -#include <rtems/score/cpu_isps.h> -#include <rtems/score/sh_io.h> -#include <rtems/score/sh.h> -#include <rtems/score/iosh7030.h> - -/* from cpu_isps.c */ -extern proc_ptr _Hardware_isr_Table[]; - -#if( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE) - unsigned long *_old_stack_ptr; -#endif - -register unsigned long *stack_ptr asm("r15"); - -/* - * sh_set_irq_priority - * - * this function sets the interrupt level of the specified interrupt - * - * parameters: - * - irq : interrupt number - * - prio: priority to set for this interrupt number - * - * returns: 0 if ok - * -1 on error - */ - -unsigned int sh_set_irq_priority( - unsigned int irq, - unsigned int prio ) -{ - unsigned32 shiftcount; - unsigned32 prioreg; - unsigned16 temp16; - unsigned32 level; - - /* - * first check for valid interrupt - */ - if(( irq > 113) || (_Hardware_isr_Table[irq] == _dummy_isp)) - return -1; - /* - * check for valid irq priority - */ - if( prio > 15 ) - return -1; - - /* - * look up appropriate interrupt priority register - */ - if( irq > 71) - { - irq = irq - 72; - shiftcount = 12 - ((irq & ~0x03) % 16); - - switch( irq / 16) - { - case 0: { prioreg = INTC_IPRC; break;} - case 1: { prioreg = INTC_IPRD; break;} - case 2: { prioreg = INTC_IPRE; break;} - default: return -1; - } - } - else - { - shiftcount = 12 - 4 * ( irq % 4); - if( irq > 67) - prioreg = INTC_IPRB; - else - prioreg = INTC_IPRA; - } - - /* - * Set the interrupt priority register - */ - _CPU_ISR_Disable( level ); - - temp16 = read16( prioreg); - temp16 &= ~( 15 << shiftcount); - temp16 |= prio << shiftcount; - write16( temp16, prioreg); - - _CPU_ISR_Enable( level ); - - return 0; -} - -/* - * _CPU_Context_save_fp_context - * - * This routine is responsible for saving the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * Sometimes a macro implementation of this is in cpu.h which dereferences - * the ** and a similarly named routine in this file is passed something - * like a (Context_Control_fp *). The general rule on making this decision - * is to avoid writing assembly language. - */ - -void _CPU_Context_save_fp( - void **fp_context_ptr -) -{ -} - -/* - * _CPU_Context_restore_fp_context - * - * This routine is responsible for restoring the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * Sometimes a macro implementation of this is in cpu.h which dereferences - * the ** and a similarly named routine in this file is passed something - * like a (Context_Control_fp *). The general rule on making this decision - * is to avoid writing assembly language. - */ - -void _CPU_Context_restore_fp( - void **fp_context_ptr -) -{ -} - -/* _CPU_Context_switch - * - * This routine performs a normal non-FP context switch. - */ - -/* within __CPU_Context_switch: - * _CPU_Context_switch - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner. It may simply be a label in _CPU_Context_switch. - * - * NOTE: It should be safe not to store r4, r5 - * - * NOTE: It is doubtful if r0 is really needed to be stored - * - * NOTE: gbr is added, but should not be necessary, as it is - * only used globally in this port. - */ - -/* - * FIXME: This is an ugly hack, but we wanted to avoid recalculating - * the offset each time Context_Control is changed - */ -void __CPU_Context_switch( - Context_Control *run, /* r4 */ - Context_Control *heir /* r5 */ -) -{ - -asm volatile(" - .global __CPU_Context_switch -__CPU_Context_switch: - - add %0,r4 - - stc.l sr,@-r4 - stc.l gbr,@-r4 - mov.l r0,@-r4 - mov.l r1,@-r4 - mov.l r2,@-r4 - mov.l r3,@-r4 - - mov.l r6,@-r4 - mov.l r7,@-r4 - mov.l r8,@-r4 - mov.l r9,@-r4 - mov.l r10,@-r4 - mov.l r11,@-r4 - mov.l r12,@-r4 - mov.l r13,@-r4 - mov.l r14,@-r4 - sts.l pr,@-r4 - sts.l mach,@-r4 - sts.l macl,@-r4 - mov.l r15,@-r4 - - mov r5, r4" - :: "I" (sizeof(Context_Control)) - ); - - asm volatile(" - .global __CPU_Context_restore -__CPU_Context_restore: - mov.l @r4+,r15 - lds.l @r4+,macl - lds.l @r4+,mach - lds.l @r4+,pr - mov.l @r4+,r14 - mov.l @r4+,r13 - mov.l @r4+,r12 - mov.l @r4+,r11 - mov.l @r4+,r10 - mov.l @r4+,r9 - mov.l @r4+,r8 - mov.l @r4+,r7 - mov.l @r4+,r6 - - mov.l @r4+,r3 - mov.l @r4+,r2 - mov.l @r4+,r1 - mov.l @r4+,r0 - ldc.l @r4+,gbr - ldc.l @r4+,sr - - rts - nop" ); -} - -/* - * This routine provides the RTEMS interrupt management. - */ - -void __ISR_Handler( unsigned32 vector) -{ - register unsigned32 level; - - _CPU_ISR_Disable( level ); - - _Thread_Dispatch_disable_level++; - -#if( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE) - if( _ISR_Nest_level == 0 ) - { - /* Install irq stack */ - _old_stack_ptr = stack_ptr; - stack_ptr = _CPU_Interrupt_stack_high; - } - -#endif - - _ISR_Nest_level++; - - _CPU_ISR_Enable( level ); - - /* call isp */ - if( _ISR_Vector_table[ vector]) - (*_ISR_Vector_table[ vector ])( vector ); - - _CPU_ISR_Disable( level ); - - _ISR_Nest_level--; - -#if( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE) - - if( _ISR_Nest_level == 0 ) - /* restore old stack pointer */ - stack_ptr = _old_stack_ptr; -#endif - - _Thread_Dispatch_disable_level--; - - _CPU_ISR_Enable( level ); - - if ( _Thread_Dispatch_disable_level == 0 ) - { - if(( _Context_Switch_necessary) || (! _ISR_Signals_to_thread_executing)) - { - _ISR_Signals_to_thread_executing = FALSE; - _Thread_Dispatch(); - } - } -} diff --git a/c/src/exec/score/cpu/sh/cpu_isps.c b/c/src/exec/score/cpu/sh/cpu_isps.c deleted file mode 100644 index 3ef3c32465..0000000000 --- a/c/src/exec/score/cpu/sh/cpu_isps.c +++ /dev/null @@ -1,252 +0,0 @@ -/* - * This file contains the isp frames for the user interrupts. - * From these procedures __ISR_Handler is called with the vector number - * as argument. - * - * __ISR_Handler is kept in a separate file (cpu_asm.c), because a bug in - * some releases of gcc doesn't properly handle #pragma interrupt, if a - * file contains both isrs and normal functions. - * - * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and - * Bernd Becker (becker@faw.uni-ulm.de) - * - * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE - * - * - * COPYRIGHT (c) 1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/score/shtypes.h> -#include <rtems/score/cpu_isps.h> - -/* - * This is a exception vector table - * - * It has the same structure like the actual vector table (vectab) - */ -proc_ptr _Hardware_isr_Table[256]={ -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, -_nmi_isp, _usb_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, -/* trapa 0 -31 */ -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -/* irq 64 ... */ -_irq0_isp, _irq1_isp, _irq2_isp, _irq3_isp, -_irq4_isp, _irq5_isp, _irq6_isp, _irq7_isp, -_dma0_isp, _dummy_isp, _dma1_isp, _dummy_isp, -_dma2_isp, _dummy_isp, _dma3_isp, _dummy_isp, -_imia0_isp, _imib0_isp, _ovi0_isp, _dummy_isp, -_imia1_isp, _imib1_isp, _ovi1_isp, _dummy_isp, -_imia2_isp, _imib2_isp, _ovi2_isp, _dummy_isp, -_imia3_isp, _imib3_isp, _ovi3_isp, _dummy_isp, -_imia4_isp, _imib4_isp, _ovi4_isp, _dummy_isp, -_eri0_isp, _rxi0_isp, _txi0_isp, _tei0_isp, -_eri1_isp, _rxi1_isp, _txi1_isp, _tei1_isp, -_prt_isp, _adu_isp, _dummy_isp, _dummy_isp, -_wdt_isp, -/* 113 */ _dref_isp -}; - -#define Str(a)#a - -/* - * Some versions of gcc and all version of egcs at least until egcs-1.1b - * are not able to handle #pragma interrupt correctly if more than 1 isr is - * contained in a file and when optimizing. - * We try to work around this problem by using the macro below. - */ -#define isp( name, number, func)\ -asm (".global _"Str(name)"\n\t" \ - "_"Str(name)": \n\t" \ - " mov.l r0,@-r15 \n\t" \ - " mov.l r1,@-r15 \n\t" \ - " mov.l r2,@-r15 \n\t" \ - " mov.l r3,@-r15 \n\t" \ - " mov.l r4,@-r15 \n\t" \ - " mov.l r5,@-r15 \n\t" \ - " mov.l r6,@-r15 \n\t" \ - " mov.l r7,@-r15 \n\t" \ - " mov.l r14,@-r15 \n\t" \ - " sts.l pr,@-r15 \n\t" \ - " sts.l mach,@-r15 \n\t" \ - " sts.l macl,@-r15 \n\t" \ - " mov r15,r14 \n\t" \ - " mov.l "Str(name)"_k, r1\n\t" \ - " jsr @r1 \n\t" \ - " mov #"Str(number)", r4\n\t" \ - " mov r14,r15 \n\t" \ - " lds.l @r15+,macl \n\t" \ - " lds.l @r15+,mach \n\t" \ - " lds.l @r15+,pr \n\t" \ - " mov.l @r15+,r14 \n\t" \ - " mov.l @r15+,r7 \n\t" \ - " mov.l @r15+,r6 \n\t" \ - " mov.l @r15+,r5 \n\t" \ - " mov.l @r15+,r4 \n\t" \ - " mov.l @r15+,r3 \n\t" \ - " mov.l @r15+,r2 \n\t" \ - " mov.l @r15+,r1 \n\t" \ - " mov.l @r15+,r0 \n\t" \ - " rte \n\t" \ - " nop \n\t" \ - " .align 2 \n\t" \ - #name"_k: \n\t" \ - ".long "Str(func)); - -/************************************************ - * Dummy interrupt service procedure for - * interrupts being not allowed --> Trap 34 - ************************************************/ -asm(" .section .text -.global __dummy_isp -__dummy_isp: - mov.l r14,@-r15 - mov r15, r14 - trapa #34 - mov.l @r15+,r14 - rte - nop"); - -/***************************** - * Non maskable interrupt - *****************************/ -isp( _nmi_isp, NMI_ISP_V, ___ISR_Handler); - -/***************************** - * User break controller - *****************************/ -isp( _usb_isp, USB_ISP_V, ___ISR_Handler); - -/***************************** - * External interrupts 0-7 - *****************************/ -isp( _irq0_isp, IRQ0_ISP_V, ___ISR_Handler); -isp( _irq1_isp, IRQ1_ISP_V, ___ISR_Handler); -isp( _irq2_isp, IRQ2_ISP_V, ___ISR_Handler); -isp( _irq3_isp, IRQ3_ISP_V, ___ISR_Handler); -isp( _irq4_isp, IRQ4_ISP_V, ___ISR_Handler); -isp( _irq5_isp, IRQ5_ISP_V, ___ISR_Handler); -isp( _irq6_isp, IRQ6_ISP_V, ___ISR_Handler); -isp( _irq7_isp, IRQ7_ISP_V, ___ISR_Handler); - -/***************************** - * DMA - controller - *****************************/ -isp( _dma0_isp, DMA0_ISP_V, ___ISR_Handler); -isp( _dma1_isp, DMA1_ISP_V, ___ISR_Handler); -isp( _dma2_isp, DMA2_ISP_V, ___ISR_Handler); -isp( _dma3_isp, DMA3_ISP_V, ___ISR_Handler); - - -/***************************** - * Interrupt timer unit - *****************************/ - -/***************************** - * Timer 0 - *****************************/ -isp( _imia0_isp, IMIA0_ISP_V, ___ISR_Handler); -isp( _imib0_isp, IMIB0_ISP_V, ___ISR_Handler); -isp( _ovi0_isp, OVI0_ISP_V, ___ISR_Handler); - -/***************************** - * Timer 1 - *****************************/ -isp( _imia1_isp, IMIA1_ISP_V, ___ISR_Handler); -isp( _imib1_isp, IMIB1_ISP_V, ___ISR_Handler); -isp( _ovi1_isp, OVI1_ISP_V, ___ISR_Handler); - -/***************************** - * Timer 2 - *****************************/ -isp( _imia2_isp, IMIA2_ISP_V, ___ISR_Handler); -isp( _imib2_isp, IMIB2_ISP_V, ___ISR_Handler); -isp( _ovi2_isp, OVI2_ISP_V, ___ISR_Handler); - -/***************************** - * Timer 3 - *****************************/ -isp( _imia3_isp, IMIA3_ISP_V, ___ISR_Handler); -isp( _imib3_isp, IMIB3_ISP_V, ___ISR_Handler); -isp( _ovi3_isp, OVI3_ISP_V, ___ISR_Handler); - -/***************************** - * Timer 4 - *****************************/ -isp( _imia4_isp, IMIA4_ISP_V, ___ISR_Handler); -isp( _imib4_isp, IMIB4_ISP_V, ___ISR_Handler); -isp( _ovi4_isp, OVI4_ISP_V, ___ISR_Handler); - - -/***************************** - * Serial interfaces - *****************************/ - -/***************************** - * Serial interface 0 - *****************************/ -isp( _eri0_isp, ERI0_ISP_V, ___ISR_Handler); -isp( _rxi0_isp, RXI0_ISP_V, ___ISR_Handler); -isp( _txi0_isp, TXI0_ISP_V, ___ISR_Handler); -isp( _tei0_isp, TEI0_ISP_V, ___ISR_Handler); - -/***************************** - * Serial interface 1 - *****************************/ -isp( _eri1_isp, ERI1_ISP_V, ___ISR_Handler); -isp( _rxi1_isp, RXI1_ISP_V, ___ISR_Handler); -isp( _txi1_isp, TXI1_ISP_V, ___ISR_Handler); -isp( _tei1_isp, TEI1_ISP_V, ___ISR_Handler); - - -/***************************** - * Parity control unit of - * the bus state controller - *****************************/ -isp( _prt_isp, PRT_ISP_V, ___ISR_Handler); - - -/****************************** - * Analog digital converter - * ADC - ******************************/ -isp( _adu_isp, ADU_ISP_V, ___ISR_Handler); - - -/****************************** - * Watchdog timer - ******************************/ -isp( _wdt_isp, WDT_ISP_V, ___ISR_Handler); - - -/****************************** - * DRAM refresh control unit - * of bus state controller - ******************************/ -isp( _dref_isp, DREF_ISP_V, ___ISR_Handler); diff --git a/c/src/exec/score/cpu/sh/cpu_isps.h b/c/src/exec/score/cpu/sh/cpu_isps.h deleted file mode 100644 index 3f9baf1ad2..0000000000 --- a/c/src/exec/score/cpu/sh/cpu_isps.h +++ /dev/null @@ -1,165 +0,0 @@ -/* - * This include file contains information pertaining to the Hitachi SH - * processor. - * - * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and - * Bernd Becker (becker@faw.uni-ulm.de) - * - * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * - * COPYRIGHT (c) 1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __CPU_ISPS_H -#define __CPU_ISPS_H - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/score/shtypes.h> - -extern void __ISR_Handler( unsigned32 vector ); - - -/* - * interrupt vector table offsets - */ -#define NMI_ISP_V 11 -#define USB_ISP_V 12 -#define IRQ0_ISP_V 64 -#define IRQ1_ISP_V 65 -#define IRQ2_ISP_V 66 -#define IRQ3_ISP_V 67 -#define IRQ4_ISP_V 68 -#define IRQ5_ISP_V 69 -#define IRQ6_ISP_V 70 -#define IRQ7_ISP_V 71 -#define DMA0_ISP_V 72 -#define DMA1_ISP_V 74 -#define DMA2_ISP_V 76 -#define DMA3_ISP_V 78 - -#define IMIA0_ISP_V 80 -#define IMIB0_ISP_V 81 -#define OVI0_ISP_V 82 - -#define IMIA1_ISP_V 84 -#define IMIB1_ISP_V 85 -#define OVI1_ISP_V 86 - -#define IMIA2_ISP_V 88 -#define IMIB2_ISP_V 89 -#define OVI2_ISP_V 90 - -#define IMIA3_ISP_V 92 -#define IMIB3_ISP_V 93 -#define OVI3_ISP_V 94 - -#define IMIA4_ISP_V 96 -#define IMIB4_ISP_V 97 -#define OVI4_ISP_V 98 - -#define ERI0_ISP_V 100 -#define RXI0_ISP_V 101 -#define TXI0_ISP_V 102 -#define TEI0_ISP_V 103 - -#define ERI1_ISP_V 104 -#define RXI1_ISP_V 105 -#define TXI1_ISP_V 106 -#define TEI1_ISP_V 107 - -#define PRT_ISP_V 108 -#define ADU_ISP_V 109 -#define WDT_ISP_V 112 -#define DREF_ISP_V 113 - - -/* dummy ISP */ -extern void _dummy_isp( void ); - -/* Non Maskable Interrupt */ -extern void _nmi_isp( void ); - -/* User Break Controller */ -extern void _usb_isp( void ); - -/* External interrupts 0-7 */ -extern void _irq0_isp( void ); -extern void _irq1_isp( void ); -extern void _irq2_isp( void ); -extern void _irq3_isp( void ); -extern void _irq4_isp( void ); -extern void _irq5_isp( void ); -extern void _irq6_isp( void ); -extern void _irq7_isp( void ); - -/* DMA - Controller */ -extern void _dma0_isp( void ); -extern void _dma1_isp( void ); -extern void _dma2_isp( void ); -extern void _dma3_isp( void ); - -/* Interrupt Timer Unit */ -/* Timer 0 */ -extern void _imia0_isp( void ); -extern void _imib0_isp( void ); -extern void _ovi0_isp( void ); -/* Timer 1 */ -extern void _imia1_isp( void ); -extern void _imib1_isp( void ); -extern void _ovi1_isp( void ); -/* Timer 2 */ -extern void _imia2_isp( void ); -extern void _imib2_isp( void ); -extern void _ovi2_isp( void ); -/* Timer 3 */ -extern void _imia3_isp( void ); -extern void _imib3_isp( void ); -extern void _ovi3_isp( void ); -/* Timer 4 */ -extern void _imia4_isp( void ); -extern void _imib4_isp( void ); -extern void _ovi4_isp( void ); - -/* seriell interfaces */ -extern void _eri0_isp( void ); -extern void _rxi0_isp( void ); -extern void _txi0_isp( void ); -extern void _tei0_isp( void ); -extern void _eri1_isp( void ); -extern void _rxi1_isp( void ); -extern void _txi1_isp( void ); -extern void _tei1_isp( void ); - -/* Parity Control Unit of the Bus State Controllers */ -extern void _prt_isp( void ); - -/* ADC */ -extern void _adu_isp( void ); - -/* Watchdog Timer */ -extern void _wdt_isp( void ); - -/* DRAM refresh control unit of bus state controller */ -extern void _dref_isp( void ); - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/c/src/exec/score/cpu/sh/iosh7030.h b/c/src/exec/score/cpu/sh/iosh7030.h deleted file mode 100644 index 48463aed47..0000000000 --- a/c/src/exec/score/cpu/sh/iosh7030.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * This include file contains information pertaining to the Hitachi SH - * processor. - * - * NOTE: NOT ALL VALUES HAVE BEEN CHECKED !! - * - * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and - * Bernd Becker (becker@faw.uni-ulm.de) - * - * Based on "iosh7030.h" distributed with Hitachi's EVB's tutorials, which - * contained no copyright notice. - * - * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * - * COPYRIGHT (c) 1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __IOSH7030_H -#define __IOSH7030_H - -/* - * After each line is explained whether the access is char short or long. - * The functions read/writeb, w, l, 8, 16, 32 can be found - * in exec/score/cpu/sh/sh_io.h - * - * 8 bit == char ( readb, writeb, read8, write8) - * 16 bit == short ( readw, writew, read16, write16 ) - * 32 bit == long ( readl, writel, read32, write32 ) - */ - -#define SCI0_SMR 0x05fffec0 /* char */ -#define SCI0_BRR 0x05fffec1 /* char */ -#define SCI0_SCR 0x05fffec2 /* char */ -#define SCI0_TDR 0x05fffec3 /* char */ -#define SCI0_SSR 0x05fffec4 /* char */ -#define SCI0_RDR 0x05fffec5 /* char */ - -#define SCI1_SMR 0x05fffec8 /* char */ -#define SCI1_BRR 0x05fffec9 /* char */ -#define SCI1_SCR 0x05fffeca /* char */ -#define SCI1_TDR 0x05fffecb /* char */ -#define SCI1_SSR 0x05fffecc /* char */ -#define SCI1_RDR 0x05fffecd /* char */ - - -#define ADDRAH 0x05fffee0 /* char */ -#define ADDRAL 0x05fffee1 /* char */ -#define ADDRBH 0x05fffee2 /* char */ -#define ADDRBL 0x05fffee3 /* char */ -#define ADDRCH 0x05fffee4 /* char */ -#define ADDRCL 0x05fffee5 /* char */ -#define ADDRDH 0x05fffee6 /* char */ -#define ADDRDL 0x05fffee7 /* char */ -#define AD_DRA 0x05fffee0 /* short */ -#define AD_DRB 0x05fffee2 /* short */ -#define AD_DRC 0x05fffee4 /* short */ -#define AD_DRD 0x05fffee6 /* short */ -#define ADCSR 0x05fffee8 /* char */ -#define ADCR 0x05fffee9 /* char */ - -/*ITU SHARED*/ -#define ITU_TSTR 0x05ffff00 /* char */ -#define ITU_TSNC 0x05ffff01 /* char */ -#define ITU_TMDR 0x05ffff02 /* char */ -#define ITU_TFCR 0x05ffff03 /* char */ - -/*ITU CHANNEL 0*/ -#define ITU_TCR0 0x05ffff04 /* char */ -#define ITU_TIOR0 0x05ffff05 /* char */ -#define ITU_TIER0 0x05ffff06 /* char */ -#define ITU_TSR0 0x05ffff07 /* char */ -#define ITU_TCNT0 0x05ffff08 /* short */ -#define ITU_GRA0 0x05ffff0a /* short */ -#define ITU_GRB0 0x05ffff0c /* short */ - - /*ITU CHANNEL 1*/ -#define ITU_TCR1 0x05ffff0E /* char */ -#define ITU_TIOR1 0x05ffff0F /* char */ -#define ITU_TIER1 0x05ffff10 /* char */ -#define ITU_TSR1 0x05ffff11 /* char */ -#define ITU_TCNT1 0x05ffff12 /* short */ -#define ITU_GRA1 0x05ffff14 /* short */ -#define ITU_GRB1 0x05ffff16 /* short */ - - - /*ITU CHANNEL 2*/ -#define ITU_TCR2 0x05ffff18 /* char */ -#define ITU_TIOR2 0x05ffff19 /* char */ -#define ITU_TIER2 0x05ffff1A /* char */ -#define ITU_TSR2 0x05ffff1B /* char */ -#define ITU_TCNT2 0x05ffff1C /* short */ -#define ITU_GRA2 0x05ffff1E /* short */ -#define ITU_GRB2 0x05ffff20 /* short */ - - /*ITU CHANNEL 3*/ -#define ITU_TCR3 0x05ffff22 /* char */ -#define ITU_TIOR3 0x05ffff23 /* char */ -#define ITU_TIER3 0x05ffff24 /* char */ -#define ITU_TSR3 0x05ffff25 /* char */ -#define ITU_TCNT3 0x05ffff26 /* short */ -#define ITU_GRA3 0x05ffff28 /* short */ -#define ITU_GRB3 0x05ffff2A /* short */ -#define ITU_BRA3 0x05ffff2C /* short */ -#define ITU_BRB3 0x05ffff2E /* short */ - - /*ITU CHANNELS 0-4 SHARED*/ -#define ITU_TOCR 0x05ffff31 /* char */ - - /*ITU CHANNEL 4*/ -#define ITU_TCR4 0x05ffff32 /* char */ -#define ITU_TIOR4 0x05ffff33 /* char */ -#define ITU_TIER4 0x05ffff34 /* char */ -#define ITU_TSR4 0x05ffff35 /* char */ -#define ITU_TCNT4 0x05ffff36 /* short */ -#define ITU_GRA4 0x05ffff38 /* short */ -#define ITU_GRB4 0x05ffff3A /* short */ -#define ITU_BRA4 0x05ffff3C /* short */ -#define ITU_BRB4 0x05ffff3E /* short */ - - /*DMAC CHANNELS 0-3 SHARED*/ -#define DMAOR 0x05ffff48 /* short */ - - /*DMAC CHANNEL 0*/ -#define DMA_SAR0 0x05ffff40 /* long */ -#define DMA_DAR0 0x05ffff44 /* long */ -#define DMA_TCR0 0x05ffff4a /* short */ -#define DMA_CHCR0 0x05ffff4e /* short */ - - /*DMAC CHANNEL 1*/ -#define DMA_SAR1 0x05ffff50 /* long */ -#define DMA_DAR1 0x05ffff54 /* long */ -#define DMA_TCR1 0x05fffF5a /* short */ -#define DMA_CHCR1 0x05ffff5e /* short */ - - /*DMAC CHANNEL 3*/ -#define DMA_SAR3 0x05ffff60 /* long */ -#define DMA_DAR3 0x05ffff64 /* long */ -#define DMA_TCR3 0x05fffF6a /* short */ -#define DMA_CHCR3 0x05ffff6e /* short */ - -/*DMAC CHANNEL 4*/ -#define DMA_SAR4 0x05ffff70 /* long */ -#define DMA_DAR4 0x05ffff74 /* long */ -#define DMA_TCR4 0x05fffF7a /* short */ -#define DMA_CHCR4 0x05ffff7e /* short */ - -/*INTC*/ -#define INTC_IPRA 0x05ffff84 /* short */ -#define INTC_IPRB 0x05ffff86 /* short */ -#define INTC_IPRC 0x05ffff88 /* short */ -#define INTC_IPRD 0x05ffff8A /* short */ -#define INTC_IPRE 0x05ffff8C /* short */ -#define INTC_ICR 0x05ffff8E /* short */ - -/*UBC*/ -#define UBC_BARH 0x05ffff90 /* short */ -#define UBC_BARL 0x05ffff92 /* short */ -#define UBC_BAMRH 0x05ffff94 /* short */ -#define UBC_BAMRL 0x05ffff96 /* short */ -#define UBC_BBR 0x05ffff98 /* short */ - -/*BSC*/ -#define BSC_BCR 0x05ffffA0 /* short */ -#define BSC_WCR1 0x05ffffA2 /* short */ -#define BSC_WCR2 0x05ffffA4 /* short */ -#define BSC_WCR3 0x05ffffA6 /* short */ -#define BSC_DCR 0x05ffffA8 /* short */ -#define BSC_PCR 0x05ffffAA /* short */ -#define BSC_RCR 0x05ffffAC /* short */ -#define BSC_RTCSR 0x05ffffAE /* short */ -#define BSC_RTCNT 0x05ffffB0 /* short */ -#define BSC_RTCOR 0x05ffffB2 /* short */ - -/*WDT*/ -#define WDT_TCSR 0x05ffffB8 /* char */ -#define WDT_TCNT 0x05ffffB9 /* char */ -#define WDT_RSTCSR 0x05ffffBB /* char */ - -/*POWER DOWN STATE*/ -#define PDT_SBYCR 0x05ffffBC /* char */ - -/*PORT A*/ -#define PADR 0x05ffffC0 /* short */ - -/*PORT B*/ -#define PBDR 0x05ffffC2 /* short */ - - /*PORT C*/ -#define PCDR 0x05ffffD0 /* short */ - -/*PFC*/ -#define PFC_PAIOR 0x05ffffC4 /* short */ -#define PFC_PBIOR 0x05ffffC6 /* short */ -#define PFC_PACR1 0x05ffffC8 /* short */ -#define PFC_PACR2 0x05ffffCA /* short */ -#define PFC_PBCR1 0x05ffffCC /* short */ -#define PFC_PBCR2 0x05ffffCE /* short */ -#define PFC_CASCR 0x05ffffEE /* short */ - -/*TPC*/ -#define TPC_TPMR 0x05ffffF0 /* short */ -#define TPC_TPCR 0x05ffffF1 /* short */ -#define TPC_NDERH 0x05ffffF2 /* short */ -#define TPC_NDERL 0x05ffffF3 /* short */ -#define TPC_NDRB 0x05ffffF4 /* char */ -#define TPC_NDRA 0x05ffff5F /* char */ -#define TPC_NDRB1 0x05ffffF6 /* char */ -#define TPC_NDRA1 0x05ffffF7 /* char */ - -#endif diff --git a/c/src/exec/score/cpu/sh/ispsh7032.c b/c/src/exec/score/cpu/sh/ispsh7032.c deleted file mode 100644 index 3ef3c32465..0000000000 --- a/c/src/exec/score/cpu/sh/ispsh7032.c +++ /dev/null @@ -1,252 +0,0 @@ -/* - * This file contains the isp frames for the user interrupts. - * From these procedures __ISR_Handler is called with the vector number - * as argument. - * - * __ISR_Handler is kept in a separate file (cpu_asm.c), because a bug in - * some releases of gcc doesn't properly handle #pragma interrupt, if a - * file contains both isrs and normal functions. - * - * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and - * Bernd Becker (becker@faw.uni-ulm.de) - * - * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE - * - * - * COPYRIGHT (c) 1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/score/shtypes.h> -#include <rtems/score/cpu_isps.h> - -/* - * This is a exception vector table - * - * It has the same structure like the actual vector table (vectab) - */ -proc_ptr _Hardware_isr_Table[256]={ -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, -_nmi_isp, _usb_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, -/* trapa 0 -31 */ -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -_dummy_isp, _dummy_isp, _dummy_isp, _dummy_isp, -/* irq 64 ... */ -_irq0_isp, _irq1_isp, _irq2_isp, _irq3_isp, -_irq4_isp, _irq5_isp, _irq6_isp, _irq7_isp, -_dma0_isp, _dummy_isp, _dma1_isp, _dummy_isp, -_dma2_isp, _dummy_isp, _dma3_isp, _dummy_isp, -_imia0_isp, _imib0_isp, _ovi0_isp, _dummy_isp, -_imia1_isp, _imib1_isp, _ovi1_isp, _dummy_isp, -_imia2_isp, _imib2_isp, _ovi2_isp, _dummy_isp, -_imia3_isp, _imib3_isp, _ovi3_isp, _dummy_isp, -_imia4_isp, _imib4_isp, _ovi4_isp, _dummy_isp, -_eri0_isp, _rxi0_isp, _txi0_isp, _tei0_isp, -_eri1_isp, _rxi1_isp, _txi1_isp, _tei1_isp, -_prt_isp, _adu_isp, _dummy_isp, _dummy_isp, -_wdt_isp, -/* 113 */ _dref_isp -}; - -#define Str(a)#a - -/* - * Some versions of gcc and all version of egcs at least until egcs-1.1b - * are not able to handle #pragma interrupt correctly if more than 1 isr is - * contained in a file and when optimizing. - * We try to work around this problem by using the macro below. - */ -#define isp( name, number, func)\ -asm (".global _"Str(name)"\n\t" \ - "_"Str(name)": \n\t" \ - " mov.l r0,@-r15 \n\t" \ - " mov.l r1,@-r15 \n\t" \ - " mov.l r2,@-r15 \n\t" \ - " mov.l r3,@-r15 \n\t" \ - " mov.l r4,@-r15 \n\t" \ - " mov.l r5,@-r15 \n\t" \ - " mov.l r6,@-r15 \n\t" \ - " mov.l r7,@-r15 \n\t" \ - " mov.l r14,@-r15 \n\t" \ - " sts.l pr,@-r15 \n\t" \ - " sts.l mach,@-r15 \n\t" \ - " sts.l macl,@-r15 \n\t" \ - " mov r15,r14 \n\t" \ - " mov.l "Str(name)"_k, r1\n\t" \ - " jsr @r1 \n\t" \ - " mov #"Str(number)", r4\n\t" \ - " mov r14,r15 \n\t" \ - " lds.l @r15+,macl \n\t" \ - " lds.l @r15+,mach \n\t" \ - " lds.l @r15+,pr \n\t" \ - " mov.l @r15+,r14 \n\t" \ - " mov.l @r15+,r7 \n\t" \ - " mov.l @r15+,r6 \n\t" \ - " mov.l @r15+,r5 \n\t" \ - " mov.l @r15+,r4 \n\t" \ - " mov.l @r15+,r3 \n\t" \ - " mov.l @r15+,r2 \n\t" \ - " mov.l @r15+,r1 \n\t" \ - " mov.l @r15+,r0 \n\t" \ - " rte \n\t" \ - " nop \n\t" \ - " .align 2 \n\t" \ - #name"_k: \n\t" \ - ".long "Str(func)); - -/************************************************ - * Dummy interrupt service procedure for - * interrupts being not allowed --> Trap 34 - ************************************************/ -asm(" .section .text -.global __dummy_isp -__dummy_isp: - mov.l r14,@-r15 - mov r15, r14 - trapa #34 - mov.l @r15+,r14 - rte - nop"); - -/***************************** - * Non maskable interrupt - *****************************/ -isp( _nmi_isp, NMI_ISP_V, ___ISR_Handler); - -/***************************** - * User break controller - *****************************/ -isp( _usb_isp, USB_ISP_V, ___ISR_Handler); - -/***************************** - * External interrupts 0-7 - *****************************/ -isp( _irq0_isp, IRQ0_ISP_V, ___ISR_Handler); -isp( _irq1_isp, IRQ1_ISP_V, ___ISR_Handler); -isp( _irq2_isp, IRQ2_ISP_V, ___ISR_Handler); -isp( _irq3_isp, IRQ3_ISP_V, ___ISR_Handler); -isp( _irq4_isp, IRQ4_ISP_V, ___ISR_Handler); -isp( _irq5_isp, IRQ5_ISP_V, ___ISR_Handler); -isp( _irq6_isp, IRQ6_ISP_V, ___ISR_Handler); -isp( _irq7_isp, IRQ7_ISP_V, ___ISR_Handler); - -/***************************** - * DMA - controller - *****************************/ -isp( _dma0_isp, DMA0_ISP_V, ___ISR_Handler); -isp( _dma1_isp, DMA1_ISP_V, ___ISR_Handler); -isp( _dma2_isp, DMA2_ISP_V, ___ISR_Handler); -isp( _dma3_isp, DMA3_ISP_V, ___ISR_Handler); - - -/***************************** - * Interrupt timer unit - *****************************/ - -/***************************** - * Timer 0 - *****************************/ -isp( _imia0_isp, IMIA0_ISP_V, ___ISR_Handler); -isp( _imib0_isp, IMIB0_ISP_V, ___ISR_Handler); -isp( _ovi0_isp, OVI0_ISP_V, ___ISR_Handler); - -/***************************** - * Timer 1 - *****************************/ -isp( _imia1_isp, IMIA1_ISP_V, ___ISR_Handler); -isp( _imib1_isp, IMIB1_ISP_V, ___ISR_Handler); -isp( _ovi1_isp, OVI1_ISP_V, ___ISR_Handler); - -/***************************** - * Timer 2 - *****************************/ -isp( _imia2_isp, IMIA2_ISP_V, ___ISR_Handler); -isp( _imib2_isp, IMIB2_ISP_V, ___ISR_Handler); -isp( _ovi2_isp, OVI2_ISP_V, ___ISR_Handler); - -/***************************** - * Timer 3 - *****************************/ -isp( _imia3_isp, IMIA3_ISP_V, ___ISR_Handler); -isp( _imib3_isp, IMIB3_ISP_V, ___ISR_Handler); -isp( _ovi3_isp, OVI3_ISP_V, ___ISR_Handler); - -/***************************** - * Timer 4 - *****************************/ -isp( _imia4_isp, IMIA4_ISP_V, ___ISR_Handler); -isp( _imib4_isp, IMIB4_ISP_V, ___ISR_Handler); -isp( _ovi4_isp, OVI4_ISP_V, ___ISR_Handler); - - -/***************************** - * Serial interfaces - *****************************/ - -/***************************** - * Serial interface 0 - *****************************/ -isp( _eri0_isp, ERI0_ISP_V, ___ISR_Handler); -isp( _rxi0_isp, RXI0_ISP_V, ___ISR_Handler); -isp( _txi0_isp, TXI0_ISP_V, ___ISR_Handler); -isp( _tei0_isp, TEI0_ISP_V, ___ISR_Handler); - -/***************************** - * Serial interface 1 - *****************************/ -isp( _eri1_isp, ERI1_ISP_V, ___ISR_Handler); -isp( _rxi1_isp, RXI1_ISP_V, ___ISR_Handler); -isp( _txi1_isp, TXI1_ISP_V, ___ISR_Handler); -isp( _tei1_isp, TEI1_ISP_V, ___ISR_Handler); - - -/***************************** - * Parity control unit of - * the bus state controller - *****************************/ -isp( _prt_isp, PRT_ISP_V, ___ISR_Handler); - - -/****************************** - * Analog digital converter - * ADC - ******************************/ -isp( _adu_isp, ADU_ISP_V, ___ISR_Handler); - - -/****************************** - * Watchdog timer - ******************************/ -isp( _wdt_isp, WDT_ISP_V, ___ISR_Handler); - - -/****************************** - * DRAM refresh control unit - * of bus state controller - ******************************/ -isp( _dref_isp, DREF_ISP_V, ___ISR_Handler); diff --git a/c/src/exec/score/cpu/sh/rtems.c b/c/src/exec/score/cpu/sh/rtems.c deleted file mode 100644 index b0e0e22e02..0000000000 --- a/c/src/exec/score/cpu/sh/rtems.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * This file contains the single entry point code for - * the SH implementation of RTEMS. - * - * NOTE: This is supposed to be a .S or .s file NOT a C file. - * - * NOTE: UNTESTED, very likely this does not not work. - * - * Author: Ralf Corsepius (corsepiu@faw.uni-ulm.de) - * - * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * - * COPYRIGHT (c) 1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -/* - * This is supposed to be an assembly file. This means that system.h - * and cpu.h should not be included in a "real" rtems file. - */ - -/* #include <rtems/system.h> */ -/* #include <rtems/score/cpu.h> */ -/* #include "asm.h" */ - -/* - * This should work but due to a bug in rtems building scheme it doesn't work - */ - -/* #include <rtems/directives.h> */ - -extern void* _Entry_points[] ; - -/* - * RTEMS - * - * This routine jumps to the directive indicated in the - * CPU defined register. This routine is used when RTEMS is - * linked by itself and placed in ROM. This routine is the - * first address in the ROM space for RTEMS. The user "calls" - * this address with the directive arguments in the normal place. - * This routine then jumps indirectly to the correct directive - * preserving the arguments. The directive should not realize - * it has been "wrapped" in this way. The table "_Entry_points" - * is used to look up the directive. - */ - -void __RTEMS() -{ - asm volatile ( - ".global _RTEMS -_RTEMS:" ); - - asm volatile ( - "jmp %0 - rts - nop" - :: "m" (_Entry_points) ); -} diff --git a/c/src/exec/score/cpu/sh/sh.h b/c/src/exec/score/cpu/sh/sh.h deleted file mode 100644 index 03d9077d3e..0000000000 --- a/c/src/exec/score/cpu/sh/sh.h +++ /dev/null @@ -1,186 +0,0 @@ -/* sh.h - * - * This include file contains information pertaining to the Hitachi SH - * processor. - * - * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and - * Bernd Becker (becker@faw.uni-ulm.de) - * - * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE - * - * - * COPYRIGHT (c) 1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef _sh_h -#define _sh_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This file contains the information required to build - * RTEMS for a particular member of the "SH" family. - * - * It does this by setting variables to indicate which implementation - * dependent features are present in a particular member of the family. - */ - -#if defined(sh7032) - -#define CPU_MODEL_NAME "SH 7032" - -#define SH_HAS_FPU 0 - -/* - * If the following macro is set to 0 there will be no software irq stack - */ -#define SH_HAS_SEPARATE_STACKS 1 - -#else - -#error "Unsupported CPU Model" - -#endif - -/* - * Define the name of the CPU family. - */ - -#define CPU_NAME "Hitachi SH" - -#ifndef ASM - -/* - * Mask for disabling interrupts - */ -#define SH_IRQDIS_VALUE 0xf0 - -#define sh_disable_interrupts( _level ) \ - asm volatile ( \ - "stc sr,%0\n\t" \ - "ldc %1,sr\n\t"\ - : "=r" (_level ) \ - : "r" (SH_IRQDIS_VALUE) ); - -#define sh_enable_interrupts( _level ) \ - asm volatile( "ldc %0,sr\n\t" \ - "nop\n\t" \ - :: "r" (_level) ); - -/* - * This temporarily restores the interrupt to _level before immediately - * disabling them again. This is used to divide long RTEMS critical - * sections into two or more parts. The parameter _level is not - * modified. - */ - -#define sh_flash_interrupts( _level ) \ - asm volatile( \ - "ldc %1,sr\n\t" \ - "nop\n\t" \ - "ldc %0,sr\n\t" \ - "nop\n\t" \ - : : "r" (SH_IRQDIS_VALUE), "r" (_level) ); - -#define sh_get_interrupt_level( _level ) \ -{ \ - register unsigned32 _tmpsr ; \ - \ - asm volatile( "stc sr, %0" : "=r" (_tmpsr) ); \ - _level = (_tmpsr & 0xf0) >> 4 ; \ -} - -#define sh_set_interrupt_level( _newlevel ) \ -{ \ - register unsigned32 _tmpsr; \ - \ - asm volatile ( "stc sr, %0" : "=r" (_tmpsr) ); \ - _tmpsr = ( _tmpsr & ~0xf0 ) | ((_newlevel) << 4) ; \ - asm volatile( "ldc %0,sr" :: "r" (_tmpsr) ); \ -} - -/* - * The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. - */ - -static inline unsigned int sh_swap_u32( - unsigned int value -) -{ - register unsigned int swapped; - - asm volatile ( - "swap.b %1,%0; " - "swap.w %0,%0; " - "swap.b %0,%0" - : "=r" (swapped) - : "r" (value) ); - - return( swapped ); -} - -static inline unsigned int sh_swap_u16( - unsigned int value -) -{ - register unsigned int swapped ; - - asm volatile ( "swap.b %1,%0" : "=r" (swapped) : "r" (value) ); - - return( swapped ); -} - -#define CPU_swap_u32( value ) sh_swap_u32( value ) -#define CPU_swap_u16( value ) sh_swap_u16( value ) - -/* - * Simple spin delay in microsecond units for device drivers. - * This is very dependent on the clock speed of the target. - * - * Since we don't have a real time clock, this is a very rough - * approximation, assuming that each cycle of the delay loop takes - * approx. 4 machine cycles. - * - * e.g.: MHZ = 20 => 5e-8 secs per instruction - * => 4 * 5e-8 secs per delay loop - */ - -#define sh_delay( microseconds ) \ -{ register unsigned int _delay = (microseconds) * (MHZ / 4 ); \ - asm volatile ( \ -"0: add #-1,%0\n \ - nop\n \ - cmp/pl %0\n \ - bt 0b\ - nop" \ - :: "r" (_delay) ); \ -} - -#define CPU_delay( microseconds ) sh_delay( microseconds ) - -extern unsigned int sh_set_irq_priority( - unsigned int irq, - unsigned int prio ); - -#endif /* !ASM */ - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/c/src/exec/score/cpu/sh/sh_io.h b/c/src/exec/score/cpu/sh/sh_io.h deleted file mode 100644 index 2a9111e307..0000000000 --- a/c/src/exec/score/cpu/sh/sh_io.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * These are some macros to access memory mapped devices - * on the SH7000-architecture. - * - * Inspired from the linux kernel's include/asm/io.h - * - * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and - * Bernd Becker (becker@faw.uni-ulm.de) - * - * COPYRIGHT (c) 1996-1998, FAW Ulm, Germany - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * - * COPYRIGHT (c) 1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef _asm_io_h -#define _asm_io_h - -#define readb(addr) (*(volatile unsigned char *) (addr)) -#define readw(addr) (*(volatile unsigned short *) (addr)) -#define readl(addr) (*(volatile unsigned int *) (addr)) -#define read8(addr) (*(volatile unsigned8 *) (addr)) -#define read16(addr) (*(volatile unsigned16 *) (addr)) -#define read32(addr) (*(volatile unsigned32 *) (addr)) - -#define writeb(b,addr) ((*(volatile unsigned char *) (addr)) = (b)) -#define writew(b,addr) ((*(volatile unsigned short *) (addr)) = (b)) -#define writel(b,addr) ((*(volatile unsigned int *) (addr)) = (b)) -#define write8(b,addr) ((*(volatile unsigned8 *) (addr)) = (b)) -#define write16(b,addr) ((*(volatile unsigned16 *) (addr)) = (b)) -#define write32(b,addr) ((*(volatile unsigned32 *) (addr)) = (b)) - -#define inb(addr) readb(addr) -#define outb(b,addr) writeb(b,addr) - -#endif diff --git a/c/src/exec/score/cpu/sh/shtypes.h b/c/src/exec/score/cpu/sh/shtypes.h deleted file mode 100644 index 853479c13b..0000000000 --- a/c/src/exec/score/cpu/sh/shtypes.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * This include file contains information pertaining to the Hitachi SH - * processor. - * - * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and - * Bernd Becker (becker@faw.uni-ulm.de) - * - * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * - * COPYRIGHT (c) 1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __CPU_SH_TYPES_h -#define __CPU_SH_TYPES_h - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section defines the basic types for this processor. - */ - -typedef unsigned char unsigned8; /* unsigned 8-bit integer */ -typedef unsigned short unsigned16; /* unsigned 16-bit integer */ -typedef unsigned int unsigned32; /* unsigned 32-bit integer */ -typedef unsigned long long unsigned64; /* unsigned 64-bit integer */ - -typedef unsigned16 Priority_Bit_map_control; - -typedef signed char signed8; /* 8-bit signed integer */ -typedef signed short signed16; /* 16-bit signed integer */ -typedef signed int signed32; /* 32-bit signed integer */ -typedef signed long long signed64; /* 64 bit signed integer */ - -typedef unsigned16 boolean; /* Boolean value, external */ - /* data bus has 16 bits */ - -typedef float single_precision; /* single precision float */ -typedef double double_precision; /* double precision float */ - -typedef void sh_isr; -typedef void ( *sh_isr_entry )( void ); - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif - diff --git a/c/src/exec/score/cpu/sparc/Makefile.in b/c/src/exec/score/cpu/sparc/Makefile.in deleted file mode 100644 index 565128f2c3..0000000000 --- a/c/src/exec/score/cpu/sparc/Makefile.in +++ /dev/null @@ -1,75 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - -RELS=$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -C_PIECES=cpu -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) - -H_FILES=$(srcdir)/cpu.h $(srcdir)/sparc.h $(srcdir)/sparctypes.h - -# H_FILES that get installed externally -EXTERNAL_H_FILES = $(srcdir)/asm.h $(srcdir)/erc32.h - -# Assembly source names, if any, go here -- minus the .s -S_PIECES=cpu_asm rtems -S_FILES=$(S_PIECES:%=%.s) -S_O_FILES=$(S_FILES:%.s=${ARCH}/%.o) - -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) $(EXTERNAL_H_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += $(CFLAGS_OS_V) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(ARCH)/rtems-cpu.rel: $(OBJS) - $(make-rel) - -all: ${ARCH} $(SRCS) preinstall $(OBJS) $(RELS) - -preinstall: $(ARCH) $(PROJECT_INCLUDE)/rtems/score/targopts.h \ - ${PROJECT_RELEASE}/lib/bsp_specs - $(INSTALL) -m 444 ${H_FILES} $(PROJECT_INCLUDE)/rtems/score -# we will share the basic cpu file - $(INSTALL) -m 444 ${EXTERNAL_H_FILES} $(PROJECT_INCLUDE) - -$(PROJECT_INCLUDE)/rtems/score/targopts.h: $(ARCH)/targopts.h-tmp - $(INSTALL) -m 444 $(ARCH)/targopts.h-tmp $@ - -# $(ARCH)/targopts.h-tmp rule is in leaf.cfg - -${PROJECT_RELEASE}/lib/bsp_specs: $(ARCH)/bsp_specs.tmp - $(INSTALL) -m 444 $(ARCH)/bsp_specs.tmp $@ - -# $(ARCH)/bsp_specs.tmp rule is in leaf.cfg diff --git a/c/src/exec/score/cpu/sparc/README b/c/src/exec/score/cpu/sparc/README deleted file mode 100644 index c4c2200075..0000000000 --- a/c/src/exec/score/cpu/sparc/README +++ /dev/null @@ -1,110 +0,0 @@ -# -# $Id$ -# - -This file discusses SPARC specific issues which are important to -this port. The primary topics in this file are: - - + Global Register Usage - + Stack Frame - + EF bit in the PSR - - -Global Register Usage -===================== - -This information on register usage is based heavily on a comment in the -file gcc-2.7.0/config/sparc/sparc.h in the the gcc 2.7.0 source. - - + g0 is hardwired to 0 - + On non-v9 systems: - - g1 is free to use as temporary. - - g2-g4 are reserved for applications. Gcc normally uses them as - temporaries, but this can be disabled via the -mno-app-regs option. - - g5 through g7 are reserved for the operating system. - + On v9 systems: - - g1 and g5 are free to use as temporaries. - - g2-g4 are reserved for applications (the compiler will not normally use - them, but they can be used as temporaries with -mapp-regs). - - g6-g7 are reserved for the operating system. - - NOTE: As of gcc 2.7.0 register g1 was used in the following scenarios: - - + as a temporary by the 64 bit sethi pattern - + when restoring call-preserved registers in large stack frames - -RTEMS places no constraints on the usage of the global registers. Although -gcc assumes that either g5-g7 (non-V9) or g6-g7 (V9) are reserved for the -operating system, RTEMS does not assume any special use for them. - - - -Stack Frame -=========== - -The stack grows downward (i.e. to lower addresses) on the SPARC architecture. - -The following is the organization of the stack frame: - - - - | ............... | - fp | | - +-------------------------------+ - | | - | Local registers, temporaries, | - | and saved floats | x bytes - | | - sp + x +-------------------------------+ - | | - | outgoing parameters past | - | the sixth one | x bytes - | | - sp + 92 +-------------------------------+ * - | | * - | area for callee to save | * - | register arguments | * 24 bytes - | | * - sp + 68 +-------------------------------+ * - | | * - | structure return pointer | * 4 bytes - | | * - sp + 64 +-------------------------------+ * - | | * - | local register set | * 32 bytes - | | * - sp + 32 +-------------------------------+ * - | | * - | input register set | * 32 bytes - | | * - sp +-------------------------------+ * - - -* = minimal stack frame - -x = optional components - -EF bit in the PSR -================= - -The EF (enable floating point unit) in the PSR is utilized in this port to -prevent non-floating point tasks from performing floating point -operations. This bit is maintained as part of the integer context. -However, the floating point context is switched BEFORE the integer -context. Thus the EF bit in place at the time of the FP switch may -indicate that FP operations are disabled. This occurs on certain task -switches, when the EF bit will be 0 for the outgoing task and thus a fault -will be generated on the first FP operation of the FP context save. - -The remedy for this is to enable FP access as the first step in both the -save and restore of the FP context area. This bit will be subsequently -reloaded by the integer context switch. - -Two of the scenarios which demonstrate this problem are outlined below: - -1. When the first FP task is switched to. The system tasks are not FP and -thus would be unable to restore the FP context of the incoming task. - -2. On a deferred FP context switch. In this case, the system might switch -from FP Task A to non-FP Task B and then to FP Task C. In this scenario, -the floating point state must technically be saved by a non-FP task. diff --git a/c/src/exec/score/cpu/sparc/asm.h b/c/src/exec/score/cpu/sparc/asm.h deleted file mode 100644 index b9a3aabeea..0000000000 --- a/c/src/exec/score/cpu/sparc/asm.h +++ /dev/null @@ -1,123 +0,0 @@ -/* asm.h - * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. - * - * - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - * - * COPYRIGHT: - * - * This file is based on similar code found in newlib available - * from ftp.cygnus.com. The file which was used had no copyright - * notice. This file is freely distributable as long as the source - * of the file is noted. - * - * $Id$ - */ - -#ifndef __SPARC_ASM_h -#define __SPARC_ASM_h - -/* - * Indicate we are in an assembly file and get the basic CPU definitions. - */ - -#ifndef ASM -#define ASM -#endif - -#include <rtems/score/targopts.h> -#include <rtems/score/cpu.h> - -/* - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. - */ - -/* XXX __USER_LABEL_PREFIX__ and __REGISTER_PREFIX__ do not work on gcc 2.7.0 */ -/* XXX The following ifdef magic fixes the problem but results in a warning */ -/* XXX when compiling assembly code. */ -#undef __USER_LABEL_PREFIX__ -#ifndef __USER_LABEL_PREFIX__ -#define __USER_LABEL_PREFIX__ _ -#endif - -#ifndef __REGISTER_PREFIX__ -#define __REGISTER_PREFIX__ -#endif - -/* ANSI concatenation macros. */ - -#define CONCAT1(a, b) CONCAT2(a, b) -#define CONCAT2(a, b) a ## b - -/* Use the right prefix for global labels. */ - -#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) - -/* Use the right prefix for registers. */ - -#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) - -/* - * define macros for all of the registers on this CPU - * - * EXAMPLE: #define d0 REG (d0) - */ - -/* - * Define macros to handle section beginning and ends. - */ - - -#define BEGIN_CODE_DCL .text -#define END_CODE_DCL -#define BEGIN_DATA_DCL .data -#define END_DATA_DCL -#define BEGIN_CODE .text -#define END_CODE -#define BEGIN_DATA -#define END_DATA -#define BEGIN_BSS -#define END_BSS -#define END - -/* - * Following must be tailor for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. - */ - -#define PUBLIC(sym) .globl SYM (sym) -#define EXTERN(sym) .globl SYM (sym) - -/* - * Entry for traps which jump to a programmer-specified trap handler. - */ - -#define TRAP(_vector, _handler) \ - mov %psr, %l0 ; \ - sethi %hi(_handler), %l4 ; \ - jmp %l4+%lo(_handler); \ - mov _vector, %l3 - -/* - * Used for the reset trap for ERC32 to avoid a supervisor instruction - */ - -#define RTRAP(_vector, _handler) \ - mov %g0, %l0 ; \ - sethi %hi(_handler), %l4 ; \ - jmp %l4+%lo(_handler); \ - mov _vector, %l3 - -#endif -/* end of include file */ - - diff --git a/c/src/exec/score/cpu/sparc/cpu.c b/c/src/exec/score/cpu/sparc/cpu.c deleted file mode 100644 index 70b0f8f219..0000000000 --- a/c/src/exec/score/cpu/sparc/cpu.c +++ /dev/null @@ -1,409 +0,0 @@ -/* - * SPARC Dependent Source - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * Ported to ERC32 implementation of the SPARC by On-Line Applications - * Research Corporation (OAR) under contract to the European Space - * Agency (ESA). - * - * ERC32 modifications of respective RTEMS file: COPYRIGHT (c) 1995. - * European Space Agency. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/score/isr.h> - -#if defined(erc32) -#include <erc32.h> -#endif - -/* - * This initializes the set of opcodes placed in each trap - * table entry. The routine which installs a handler is responsible - * for filling in the fields for the _handler address and the _vector - * trap type. - * - * The constants following this structure are masks for the fields which - * must be filled in when the handler is installed. - */ - -const CPU_Trap_table_entry _CPU_Trap_slot_template = { - 0xa1480000, /* mov %psr, %l0 */ - 0x29000000, /* sethi %hi(_handler), %l4 */ - 0x81c52000, /* jmp %l4 + %lo(_handler) */ - 0xa6102000 /* mov _vector, %l3 */ -}; - -/*PAGE - * - * _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * Input Parameters: - * cpu_table - CPU table to initialize - * thread_dispatch - address of disptaching routine - * - * Output Parameters: NONE - * - * NOTE: There is no need to save the pointer to the thread dispatch routine. - * The SPARC's assembly code can reference it directly with no problems. - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) /* ignored on this CPU */ -) -{ - void *pointer; - -#ifndef NO_TABLE_MOVE - unsigned32 trap_table_start; - unsigned32 tbr_value; - CPU_Trap_table_entry *old_tbr; - CPU_Trap_table_entry *trap_table; - - /* - * Install the executive's trap table. All entries from the original - * trap table are copied into the executive's trap table. This is essential - * since this preserves critical trap handlers such as the window underflow - * and overflow handlers. It is the responsibility of the BSP to provide - * install these in the initial trap table. - */ - - - trap_table_start = (unsigned32) &_CPU_Trap_Table_area; - if (trap_table_start & (SPARC_TRAP_TABLE_ALIGNMENT-1)) - trap_table_start = (trap_table_start + SPARC_TRAP_TABLE_ALIGNMENT) & - ~(SPARC_TRAP_TABLE_ALIGNMENT-1); - - trap_table = (CPU_Trap_table_entry *) trap_table_start; - - sparc_get_tbr( tbr_value ); - - old_tbr = (CPU_Trap_table_entry *) (tbr_value & 0xfffff000); - - memcpy( trap_table, (void *) old_tbr, 256 * sizeof( CPU_Trap_table_entry ) ); - - sparc_set_tbr( trap_table_start ); - -#endif - - /* - * This seems to be the most appropriate way to obtain an initial - * FP context on the SPARC. The NULL fp context is copied it to - * the task's FP context during Context_Initialize. - */ - - pointer = &_CPU_Null_fp_context; - _CPU_Context_save_fp( &pointer ); - - /* - * Grab our own copy of the user's CPU table. - */ - - _CPU_Table = *cpu_table; - -#if defined(erc32) - - /* - * ERC32 specific initialization - */ - - _ERC32_MEC_Timer_Control_Mirror = 0; - ERC32_MEC.Timer_Control = 0; - - ERC32_MEC.Control |= ERC32_CONFIGURATION_POWER_DOWN_ALLOWED; - -#endif - -} - -/*PAGE - * - * _CPU_ISR_Get_level - * - * Input Parameters: NONE - * - * Output Parameters: - * returns the current interrupt level (PIL field of the PSR) - */ - -unsigned32 _CPU_ISR_Get_level( void ) -{ - unsigned32 level; - - sparc_get_interrupt_level( level ); - - return level; -} - -/*PAGE - * - * _CPU_ISR_install_raw_handler - * - * This routine installs the specified handler as a "raw" non-executive - * supported trap handler (a.k.a. interrupt service routine). - * - * Input Parameters: - * vector - trap table entry number plus synchronous - * vs. asynchronous information - * new_handler - address of the handler to be installed - * old_handler - pointer to an address of the handler previously installed - * - * Output Parameters: NONE - * *new_handler - address of the handler previously installed - * - * NOTE: - * - * On the SPARC, there are really only 256 vectors. However, the executive - * has no easy, fast, reliable way to determine which traps are synchronous - * and which are asynchronous. By default, synchronous traps return to the - * instruction which caused the interrupt. So if you install a software - * trap handler as an executive interrupt handler (which is desirable since - * RTEMS takes care of window and register issues), then the executive needs - * to know that the return address is to the trap rather than the instruction - * following the trap. - * - * So vectors 0 through 255 are treated as regular asynchronous traps which - * provide the "correct" return address. Vectors 256 through 512 are assumed - * by the executive to be synchronous and to require that the return address - * be fudged. - * - * If you use this mechanism to install a trap handler which must reexecute - * the instruction which caused the trap, then it should be installed as - * an asynchronous trap. This will avoid the executive changing the return - * address. - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - unsigned32 real_vector; - CPU_Trap_table_entry *tbr; - CPU_Trap_table_entry *slot; - unsigned32 u32_tbr; - unsigned32 u32_handler; - - /* - * Get the "real" trap number for this vector ignoring the synchronous - * versus asynchronous indicator included with our vector numbers. - */ - - real_vector = SPARC_REAL_TRAP_NUMBER( vector ); - - /* - * Get the current base address of the trap table and calculate a pointer - * to the slot we are interested in. - */ - - sparc_get_tbr( u32_tbr ); - - u32_tbr &= 0xfffff000; - - tbr = (CPU_Trap_table_entry *) u32_tbr; - - slot = &tbr[ real_vector ]; - - /* - * Get the address of the old_handler from the trap table. - * - * NOTE: The old_handler returned will be bogus if it does not follow - * the RTEMS model. - */ - -#define HIGH_BITS_MASK 0xFFFFFC00 -#define HIGH_BITS_SHIFT 10 -#define LOW_BITS_MASK 0x000003FF - - if ( slot->mov_psr_l0 == _CPU_Trap_slot_template.mov_psr_l0 ) { - u32_handler = - ((slot->sethi_of_handler_to_l4 & HIGH_BITS_MASK) << HIGH_BITS_SHIFT) | - (slot->jmp_to_low_of_handler_plus_l4 & LOW_BITS_MASK); - *old_handler = (proc_ptr) u32_handler; - } else - *old_handler = 0; - - /* - * Copy the template to the slot and then fix it. - */ - - *slot = _CPU_Trap_slot_template; - - u32_handler = (unsigned32) new_handler; - - slot->mov_vector_l3 |= vector; - slot->sethi_of_handler_to_l4 |= - (u32_handler & HIGH_BITS_MASK) >> HIGH_BITS_SHIFT; - slot->jmp_to_low_of_handler_plus_l4 |= (u32_handler & LOW_BITS_MASK); -} - -/*PAGE - * - * _CPU_ISR_install_vector - * - * This kernel routine installs the RTEMS handler for the - * specified vector. - * - * Input parameters: - * vector - interrupt vector number - * new_handler - replacement ISR for this vector number - * old_handler - pointer to former ISR for this vector number - * - * Output parameters: - * *old_handler - former ISR for this vector number - * - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - unsigned32 real_vector; - proc_ptr ignored; - - /* - * Get the "real" trap number for this vector ignoring the synchronous - * versus asynchronous indicator included with our vector numbers. - */ - - real_vector = SPARC_REAL_TRAP_NUMBER( vector ); - - /* - * Return the previous ISR handler. - */ - - *old_handler = _ISR_Vector_table[ real_vector ]; - - /* - * Install the wrapper so this ISR can be invoked properly. - */ - - _CPU_ISR_install_raw_handler( vector, _ISR_Handler, &ignored ); - - /* - * We put the actual user ISR address in '_ISR_vector_table'. This will - * be used by the _ISR_Handler so the user gets control. - */ - - _ISR_Vector_table[ real_vector ] = new_handler; -} - -/*PAGE - * - * _CPU_Context_Initialize - * - * This kernel routine initializes the basic non-FP context area associated - * with each thread. - * - * Input parameters: - * the_context - pointer to the context area - * stack_base - address of memory for the SPARC - * size - size in bytes of the stack area - * new_level - interrupt level for this context area - * entry_point - the starting execution point for this this context - * is_fp - TRUE if this context is associated with an FP thread - * - * Output parameters: NONE - */ - -void _CPU_Context_Initialize( - Context_Control *the_context, - unsigned32 *stack_base, - unsigned32 size, - unsigned32 new_level, - void *entry_point, - boolean is_fp -) -{ - unsigned32 stack_high; /* highest "stack aligned" address */ - unsigned32 the_size; - unsigned32 tmp_psr; - - /* - * On CPUs with stacks which grow down (i.e. SPARC), we build the stack - * based on the stack_high address. - */ - - stack_high = ((unsigned32)(stack_base) + size); - stack_high &= ~(CPU_STACK_ALIGNMENT - 1); - - the_size = size & ~(CPU_STACK_ALIGNMENT - 1); - - /* - * See the README in this directory for a diagram of the stack. - */ - - the_context->o7 = ((unsigned32) entry_point) - 8; - the_context->o6_sp = stack_high - CPU_MINIMUM_STACK_FRAME_SIZE; - the_context->i6_fp = stack_high; - - /* - * Build the PSR for the task. Most everything can be 0 and the - * CWP is corrected during the context switch. - * - * The EF bit determines if the floating point unit is available. - * The FPU is ONLY enabled if the context is associated with an FP task - * and this SPARC model has an FPU. - */ - - sparc_get_psr( tmp_psr ); - tmp_psr &= ~SPARC_PSR_PIL_MASK; - tmp_psr |= (new_level << 8) & SPARC_PSR_PIL_MASK; - tmp_psr &= ~SPARC_PSR_EF_MASK; /* disabled by default */ - -#if (SPARC_HAS_FPU == 1) - /* - * If this bit is not set, then a task gets a fault when it accesses - * a floating point register. This is a nice way to detect floating - * point tasks which are not currently declared as such. - */ - - if ( is_fp ) - tmp_psr |= SPARC_PSR_EF_MASK; -#endif - the_context->psr = tmp_psr; -} - -/*PAGE - * - * _CPU_Thread_Idle_body - * - * Some SPARC implementations have low power, sleep, or idle modes. This - * tries to take advantage of those models. - */ - -#if (CPU_PROVIDES_IDLE_THREAD_BODY == TRUE) - -/* - * This is the implementation for the erc32. - * - * NOTE: Low power mode was enabled at initialization time. - */ - -#if defined(erc32) - -void _CPU_Thread_Idle_body( void ) -{ - while (1) { - ERC32_MEC.Power_Down = 0; /* value is irrelevant */ - } -} - -#endif - -#endif /* CPU_PROVIDES_IDLE_THREAD_BODY */ diff --git a/c/src/exec/score/cpu/sparc/cpu.h b/c/src/exec/score/cpu/sparc/cpu.h deleted file mode 100644 index 592a3a438f..0000000000 --- a/c/src/exec/score/cpu/sparc/cpu.h +++ /dev/null @@ -1,1015 +0,0 @@ -/* cpu.h - * - * This include file contains information pertaining to the port of - * the executive to the SPARC processor. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * Ported to ERC32 implementation of the SPARC by On-Line Applications - * Research Corporation (OAR) under contract to the European Space - * Agency (ESA). - * - * ERC32 modifications of respective RTEMS file: COPYRIGHT (c) 1995. - * European Space Agency. - * - * $Id$ - */ - -#ifndef __CPU_h -#define __CPU_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/score/sparc.h> /* pick up machine definitions */ -#ifndef ASM -#include <rtems/score/sparctypes.h> -#endif - -/* conditional compilation parameters */ - -/* - * Should the calls to _Thread_Enable_dispatch be inlined? - * - * If TRUE, then they are inlined. - * If FALSE, then a subroutine call is made. - */ - -#define CPU_INLINE_ENABLE_DISPATCH TRUE - -/* - * Should the body of the search loops in _Thread_queue_Enqueue_priority - * be unrolled one time? In unrolled each iteration of the loop examines - * two "nodes" on the chain being searched. Otherwise, only one node - * is examined per iteration. - * - * If TRUE, then the loops are unrolled. - * If FALSE, then the loops are not unrolled. - * - * This parameter could go either way on the SPARC. The interrupt flash - * code is relatively lengthy given the requirements for nops following - * writes to the psr. But if the clock speed were high enough, this would - * not represent a great deal of time. - */ - -#define CPU_UNROLL_ENQUEUE_PRIORITY TRUE - -/* - * Does the executive manage a dedicated interrupt stack in software? - * - * If TRUE, then a stack is allocated in _Interrupt_Manager_initialization. - * If FALSE, nothing is done. - * - * The SPARC does not have a dedicated HW interrupt stack and one has - * been implemented in SW. - */ - -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK TRUE - -/* - * Does this CPU have hardware support for a dedicated interrupt stack? - * - * If TRUE, then it must be installed during initialization. - * If FALSE, then no installation is performed. - * - * The SPARC does not have a dedicated HW interrupt stack. - */ - -#define CPU_HAS_HARDWARE_INTERRUPT_STACK FALSE - -/* - * Do we allocate a dedicated interrupt stack in the Interrupt Manager? - * - * If TRUE, then the memory is allocated during initialization. - * If FALSE, then the memory is allocated during initialization. - */ - -#define CPU_ALLOCATE_INTERRUPT_STACK TRUE - -/* - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? - */ - -#define CPU_ISR_PASSES_FRAME_POINTER 0 - -/* - * Does the CPU have hardware floating point? - * - * If TRUE, then the FLOATING_POINT task attribute is supported. - * If FALSE, then the FLOATING_POINT task attribute is ignored. - */ - -#if ( SPARC_HAS_FPU == 1 ) -#define CPU_HARDWARE_FP TRUE -#else -#define CPU_HARDWARE_FP FALSE -#endif - -/* - * Are all tasks FLOATING_POINT tasks implicitly? - * - * If TRUE, then the FLOATING_POINT task attribute is assumed. - * If FALSE, then the FLOATING_POINT task attribute is followed. - */ - -#define CPU_ALL_TASKS_ARE_FP FALSE - -/* - * Should the IDLE task have a floating point context? - * - * If TRUE, then the IDLE task is created as a FLOATING_POINT task - * and it has a floating point context which is switched in and out. - * If FALSE, then the IDLE task does not have a floating point context. - */ - -#define CPU_IDLE_TASK_IS_FP FALSE - -/* - * Should the saving of the floating point registers be deferred - * until a context switch is made to another different floating point - * task? - * - * If TRUE, then the floating point context will not be stored until - * necessary. It will remain in the floating point registers and not - * disturned until another floating point task is switched to. - * - * If FALSE, then the floating point context is saved when a floating - * point task is switched out and restored when the next floating point - * task is restored. The state of the floating point registers between - * those two operations is not specified. - */ - -#define CPU_USE_DEFERRED_FP_SWITCH TRUE - -/* - * Does this port provide a CPU dependent IDLE task implementation? - * - * If TRUE, then the routine _CPU_Thread_Idle_body - * must be provided and is the default IDLE thread body instead of - * _CPU_Thread_Idle_body. - * - * If FALSE, then use the generic IDLE thread body if the BSP does - * not provide one. - */ - -#if (SPARC_HAS_LOW_POWER_MODE == 1) -#define CPU_PROVIDES_IDLE_THREAD_BODY TRUE -#else -#define CPU_PROVIDES_IDLE_THREAD_BODY FALSE -#endif - -/* - * Does the stack grow up (toward higher addresses) or down - * (toward lower addresses)? - * - * If TRUE, then the grows upward. - * If FALSE, then the grows toward smaller addresses. - * - * The stack grows to lower addresses on the SPARC. - */ - -#define CPU_STACK_GROWS_UP FALSE - -/* - * The following is the variable attribute used to force alignment - * of critical data structures. On some processors it may make - * sense to have these aligned on tighter boundaries than - * the minimum requirements of the compiler in order to have as - * much of the critical data area as possible in a cache line. - * - * The SPARC does not appear to have particularly strict alignment - * requirements. This value was chosen to take advantages of caches. - */ - -#define CPU_STRUCTURE_ALIGNMENT __attribute__ ((aligned (16))) - -/* - * Define what is required to specify how the network to host conversion - * routines are handled. - */ - -#define CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE -#define CPU_BIG_ENDIAN TRUE -#define CPU_LITTLE_ENDIAN FALSE - -/* - * The following defines the number of bits actually used in the - * interrupt field of the task mode. How those bits map to the - * CPU interrupt levels is defined by the routine _CPU_ISR_Set_level(). - * - * The SPARC has 16 interrupt levels in the PIL field of the PSR. - */ - -#define CPU_MODES_INTERRUPT_MASK 0x0000000F - -/* - * This structure represents the organization of the minimum stack frame - * for the SPARC. More framing information is required in certain situaions - * such as when there are a large number of out parameters or when the callee - * must save floating point registers. - */ - -#ifndef ASM - -typedef struct { - unsigned32 l0; - unsigned32 l1; - unsigned32 l2; - unsigned32 l3; - unsigned32 l4; - unsigned32 l5; - unsigned32 l6; - unsigned32 l7; - unsigned32 i0; - unsigned32 i1; - unsigned32 i2; - unsigned32 i3; - unsigned32 i4; - unsigned32 i5; - unsigned32 i6_fp; - unsigned32 i7; - void *structure_return_address; - /* - * The following are for the callee to save the register arguments in - * should this be necessary. - */ - unsigned32 saved_arg0; - unsigned32 saved_arg1; - unsigned32 saved_arg2; - unsigned32 saved_arg3; - unsigned32 saved_arg4; - unsigned32 saved_arg5; - unsigned32 pad0; -} CPU_Minimum_stack_frame; - -#endif /* ASM */ - -#define CPU_STACK_FRAME_L0_OFFSET 0x00 -#define CPU_STACK_FRAME_L1_OFFSET 0x04 -#define CPU_STACK_FRAME_L2_OFFSET 0x08 -#define CPU_STACK_FRAME_L3_OFFSET 0x0c -#define CPU_STACK_FRAME_L4_OFFSET 0x10 -#define CPU_STACK_FRAME_L5_OFFSET 0x14 -#define CPU_STACK_FRAME_L6_OFFSET 0x18 -#define CPU_STACK_FRAME_L7_OFFSET 0x1c -#define CPU_STACK_FRAME_I0_OFFSET 0x20 -#define CPU_STACK_FRAME_I1_OFFSET 0x24 -#define CPU_STACK_FRAME_I2_OFFSET 0x28 -#define CPU_STACK_FRAME_I3_OFFSET 0x2c -#define CPU_STACK_FRAME_I4_OFFSET 0x30 -#define CPU_STACK_FRAME_I5_OFFSET 0x34 -#define CPU_STACK_FRAME_I6_FP_OFFSET 0x38 -#define CPU_STACK_FRAME_I7_OFFSET 0x3c -#define CPU_STRUCTURE_RETURN_ADDRESS_OFFSET 0x40 -#define CPU_STACK_FRAME_SAVED_ARG0_OFFSET 0x44 -#define CPU_STACK_FRAME_SAVED_ARG1_OFFSET 0x48 -#define CPU_STACK_FRAME_SAVED_ARG2_OFFSET 0x4c -#define CPU_STACK_FRAME_SAVED_ARG3_OFFSET 0x50 -#define CPU_STACK_FRAME_SAVED_ARG4_OFFSET 0x54 -#define CPU_STACK_FRAME_SAVED_ARG5_OFFSET 0x58 -#define CPU_STACK_FRAME_PAD0_OFFSET 0x5c - -#define CPU_MINIMUM_STACK_FRAME_SIZE 0x60 - -/* - * Contexts - * - * Generally there are 2 types of context to save. - * 1. Interrupt registers to save - * 2. Task level registers to save - * - * This means we have the following 3 context items: - * 1. task level context stuff:: Context_Control - * 2. floating point task stuff:: Context_Control_fp - * 3. special interrupt level context :: Context_Control_interrupt - * - * On the SPARC, we are relatively conservative in that we save most - * of the CPU state in the context area. The ET (enable trap) bit and - * the CWP (current window pointer) fields of the PSR are considered - * system wide resources and are not maintained on a per-thread basis. - */ - -#ifndef ASM - -typedef struct { - /* - * Using a double g0_g1 will put everything in this structure on a - * double word boundary which allows us to use double word loads - * and stores safely in the context switch. - */ - double g0_g1; - unsigned32 g2; - unsigned32 g3; - unsigned32 g4; - unsigned32 g5; - unsigned32 g6; - unsigned32 g7; - - unsigned32 l0; - unsigned32 l1; - unsigned32 l2; - unsigned32 l3; - unsigned32 l4; - unsigned32 l5; - unsigned32 l6; - unsigned32 l7; - - unsigned32 i0; - unsigned32 i1; - unsigned32 i2; - unsigned32 i3; - unsigned32 i4; - unsigned32 i5; - unsigned32 i6_fp; - unsigned32 i7; - - unsigned32 o0; - unsigned32 o1; - unsigned32 o2; - unsigned32 o3; - unsigned32 o4; - unsigned32 o5; - unsigned32 o6_sp; - unsigned32 o7; - - unsigned32 psr; -} Context_Control; - -#endif /* ASM */ - -/* - * Offsets of fields with Context_Control for assembly routines. - */ - -#define G0_OFFSET 0x00 -#define G1_OFFSET 0x04 -#define G2_OFFSET 0x08 -#define G3_OFFSET 0x0C -#define G4_OFFSET 0x10 -#define G5_OFFSET 0x14 -#define G6_OFFSET 0x18 -#define G7_OFFSET 0x1C - -#define L0_OFFSET 0x20 -#define L1_OFFSET 0x24 -#define L2_OFFSET 0x28 -#define L3_OFFSET 0x2C -#define L4_OFFSET 0x30 -#define L5_OFFSET 0x34 -#define L6_OFFSET 0x38 -#define L7_OFFSET 0x3C - -#define I0_OFFSET 0x40 -#define I1_OFFSET 0x44 -#define I2_OFFSET 0x48 -#define I3_OFFSET 0x4C -#define I4_OFFSET 0x50 -#define I5_OFFSET 0x54 -#define I6_FP_OFFSET 0x58 -#define I7_OFFSET 0x5C - -#define O0_OFFSET 0x60 -#define O1_OFFSET 0x64 -#define O2_OFFSET 0x68 -#define O3_OFFSET 0x6C -#define O4_OFFSET 0x70 -#define O5_OFFSET 0x74 -#define O6_SP_OFFSET 0x78 -#define O7_OFFSET 0x7C - -#define PSR_OFFSET 0x80 - -#define CONTEXT_CONTROL_SIZE 0x84 - -/* - * The floating point context area. - */ - -#ifndef ASM - -typedef struct { - double f0_f1; - double f2_f3; - double f4_f5; - double f6_f7; - double f8_f9; - double f10_f11; - double f12_f13; - double f14_f15; - double f16_f17; - double f18_f19; - double f20_f21; - double f22_f23; - double f24_f25; - double f26_f27; - double f28_f29; - double f30_f31; - unsigned32 fsr; -} Context_Control_fp; - -#endif /* ASM */ - -/* - * Offsets of fields with Context_Control_fp for assembly routines. - */ - -#define FO_F1_OFFSET 0x00 -#define F2_F3_OFFSET 0x08 -#define F4_F5_OFFSET 0x10 -#define F6_F7_OFFSET 0x18 -#define F8_F9_OFFSET 0x20 -#define F1O_F11_OFFSET 0x28 -#define F12_F13_OFFSET 0x30 -#define F14_F15_OFFSET 0x38 -#define F16_F17_OFFSET 0x40 -#define F18_F19_OFFSET 0x48 -#define F2O_F21_OFFSET 0x50 -#define F22_F23_OFFSET 0x58 -#define F24_F25_OFFSET 0x60 -#define F26_F27_OFFSET 0x68 -#define F28_F29_OFFSET 0x70 -#define F3O_F31_OFFSET 0x78 -#define FSR_OFFSET 0x80 - -#define CONTEXT_CONTROL_FP_SIZE 0x84 - -#ifndef ASM - -/* - * Context saved on stack for an interrupt. - * - * NOTE: The PSR, PC, and NPC are only saved in this structure for the - * benefit of the user's handler. - */ - -typedef struct { - CPU_Minimum_stack_frame Stack_frame; - unsigned32 psr; - unsigned32 pc; - unsigned32 npc; - unsigned32 g1; - unsigned32 g2; - unsigned32 g3; - unsigned32 g4; - unsigned32 g5; - unsigned32 g6; - unsigned32 g7; - unsigned32 i0; - unsigned32 i1; - unsigned32 i2; - unsigned32 i3; - unsigned32 i4; - unsigned32 i5; - unsigned32 i6_fp; - unsigned32 i7; - unsigned32 y; - unsigned32 pad0_offset; -} CPU_Interrupt_frame; - -#endif /* ASM */ - -/* - * Offsets of fields with CPU_Interrupt_frame for assembly routines. - */ - -#define ISF_STACK_FRAME_OFFSET 0x00 -#define ISF_PSR_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x00 -#define ISF_PC_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x04 -#define ISF_NPC_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x08 -#define ISF_G1_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x0c -#define ISF_G2_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x10 -#define ISF_G3_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x14 -#define ISF_G4_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x18 -#define ISF_G5_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x1c -#define ISF_G6_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x20 -#define ISF_G7_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x24 -#define ISF_I0_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x28 -#define ISF_I1_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x2c -#define ISF_I2_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x30 -#define ISF_I3_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x34 -#define ISF_I4_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x38 -#define ISF_I5_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x3c -#define ISF_I6_FP_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x40 -#define ISF_I7_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x44 -#define ISF_Y_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x48 -#define ISF_PAD0_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x4c - -#define CONTEXT_CONTROL_INTERRUPT_FRAME_SIZE CPU_MINIMUM_STACK_FRAME_SIZE + 0x50 -#ifndef ASM - -/* - * The following table contains the information required to configure - * the processor specific parameters. - */ - -typedef struct { - void (*pretasking_hook)( void ); - void (*predriver_hook)( void ); - void (*postdriver_hook)( void ); - void (*idle_task)( void ); - boolean do_zero_of_workspace; - unsigned32 idle_task_stack_size; - unsigned32 interrupt_stack_size; - unsigned32 extra_mpci_receive_server_stack; - void * (*stack_allocate_hook)( unsigned32 ); - void (*stack_free_hook)( void* ); - /* end of fields required on all CPUs */ - -} rtems_cpu_table; - -/* - * This variable is contains the initialize context for the FP unit. - * It is filled in by _CPU_Initialize and copied into the task's FP - * context area during _CPU_Context_Initialize. - */ - -SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context CPU_STRUCTURE_ALIGNMENT; - -/* - * This stack is allocated by the Interrupt Manager and the switch - * is performed in _ISR_Handler. These variables contain pointers - * to the lowest and highest addresses in the chunk of memory allocated - * for the interrupt stack. Since it is unknown whether the stack - * grows up or down (in general), this give the CPU dependent - * code the option of picking the version it wants to use. Thus - * both must be present if either is. - * - * The SPARC supports a software based interrupt stack and these - * are required. - */ - -SCORE_EXTERN void *_CPU_Interrupt_stack_low; -SCORE_EXTERN void *_CPU_Interrupt_stack_high; - -#if defined(erc32) - -/* - * ERC32 Specific Variables - */ - -SCORE_EXTERN unsigned32 _ERC32_MEC_Timer_Control_Mirror; - -#endif - -/* - * The following type defines an entry in the SPARC's trap table. - * - * NOTE: The instructions chosen are RTEMS dependent although one is - * obligated to use two of the four instructions to perform a - * long jump. The other instructions load one register with the - * trap type (a.k.a. vector) and another with the psr. - */ - -typedef struct { - unsigned32 mov_psr_l0; /* mov %psr, %l0 */ - unsigned32 sethi_of_handler_to_l4; /* sethi %hi(_handler), %l4 */ - unsigned32 jmp_to_low_of_handler_plus_l4; /* jmp %l4 + %lo(_handler) */ - unsigned32 mov_vector_l3; /* mov _vector, %l3 */ -} CPU_Trap_table_entry; - -/* - * This is the set of opcodes for the instructions loaded into a trap - * table entry. The routine which installs a handler is responsible - * for filling in the fields for the _handler address and the _vector - * trap type. - * - * The constants following this structure are masks for the fields which - * must be filled in when the handler is installed. - */ - -extern const CPU_Trap_table_entry _CPU_Trap_slot_template; - -/* - * This is the executive's trap table which is installed into the TBR - * register. - * - * NOTE: Unfortunately, this must be aligned on a 4096 byte boundary. - * The GNU tools as of binutils 2.5.2 and gcc 2.7.0 would not - * align an entity to anything greater than a 512 byte boundary. - * - * Because of this, we pull a little bit of a trick. We allocate - * enough memory so we can grab an address on a 4096 byte boundary - * from this area. - */ - -#define SPARC_TRAP_TABLE_ALIGNMENT 4096 - -#ifndef NO_TABLE_MOVE - -SCORE_EXTERN unsigned8 _CPU_Trap_Table_area[ 8192 ] - __attribute__ ((aligned (SPARC_TRAP_TABLE_ALIGNMENT))); -#endif - - -/* - * The size of the floating point context area. - */ - -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) - -#endif - -/* - * Amount of extra stack (above minimum stack size) required by - * MPCI receive server thread. Remember that in a multiprocessor - * system this thread must exist and be able to process all directives. - */ - -#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 1024 - -/* - * This defines the number of entries in the ISR_Vector_table managed - * by the executive. - * - * On the SPARC, there are really only 256 vectors. However, the executive - * has no easy, fast, reliable way to determine which traps are synchronous - * and which are asynchronous. By default, synchronous traps return to the - * instruction which caused the interrupt. So if you install a software - * trap handler as an executive interrupt handler (which is desirable since - * RTEMS takes care of window and register issues), then the executive needs - * to know that the return address is to the trap rather than the instruction - * following the trap. - * - * So vectors 0 through 255 are treated as regular asynchronous traps which - * provide the "correct" return address. Vectors 256 through 512 are assumed - * by the executive to be synchronous and to require that the return address - * be fudged. - * - * If you use this mechanism to install a trap handler which must reexecute - * the instruction which caused the trap, then it should be installed as - * an asynchronous trap. This will avoid the executive changing the return - * address. - */ - -#define CPU_INTERRUPT_NUMBER_OF_VECTORS 256 -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER 511 - -#define SPARC_SYNCHRONOUS_TRAP_BIT_MASK 0x100 -#define SPARC_ASYNCHRONOUS_TRAP( _trap ) (_trap) -#define SPARC_SYNCHRONOUS_TRAP( _trap ) ((_trap) + 256 ) - -#define SPARC_REAL_TRAP_NUMBER( _trap ) ((_trap) % 256) - -/* - * Should be large enough to run all tests. This insures - * that a "reasonable" small application should not have any problems. - * - * This appears to be a fairly generous number for the SPARC since - * represents a call depth of about 20 routines based on the minimum - * stack frame. - */ - -#define CPU_STACK_MINIMUM_SIZE (1024*2 + 512) - -/* - * CPU's worst alignment requirement for data types on a byte boundary. This - * alignment does not take into account the requirements for the stack. - * - * On the SPARC, this is required for double word loads and stores. - */ - -#define CPU_ALIGNMENT 8 - -/* - * This number corresponds to the byte alignment requirement for the - * heap handler. This alignment requirement may be stricter than that - * for the data types alignment specified by CPU_ALIGNMENT. It is - * common for the heap to follow the same alignment requirement as - * CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict enough for the heap, - * then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for memory - * buffers allocated by the partition manager. This alignment requirement - * may be stricter than that for the data types alignment specified by - * CPU_ALIGNMENT. It is common for the partition to follow the same - * alignment requirement as CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict - * enough for the partition, then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for the - * stack. This alignment requirement may be stricter than that for the - * data types alignment specified by CPU_ALIGNMENT. If the CPU_ALIGNMENT - * is strict enough for the stack, then this should be set to 0. - * - * NOTE: This must be a power of 2 either 0 or greater than CPU_ALIGNMENT. - * - * The alignment restrictions for the SPARC are not that strict but this - * should unsure that the stack is always sufficiently alignment that the - * window overflow, underflow, and flush routines can use double word loads - * and stores. - */ - -#define CPU_STACK_ALIGNMENT 16 - -#ifndef ASM - -/* ISR handler macros */ - -/* - * Disable all interrupts for a critical section. The previous - * level is returned in _level. - */ - -#define _CPU_ISR_Disable( _level ) \ - sparc_disable_interrupts( _level ) - -/* - * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). - * This indicates the end of a critical section. The parameter - * _level is not modified. - */ - -#define _CPU_ISR_Enable( _level ) \ - sparc_enable_interrupts( _level ) - -/* - * This temporarily restores the interrupt to _level before immediately - * disabling them again. This is used to divide long critical - * sections into two or more parts. The parameter _level is not - * modified. - */ - -#define _CPU_ISR_Flash( _level ) \ - sparc_flash_interrupts( _level ) - -/* - * Map interrupt level in task mode onto the hardware that the CPU - * actually provides. Currently, interrupt levels which do not - * map onto the CPU in a straight fashion are undefined. - */ - -#define _CPU_ISR_Set_level( _newlevel ) \ - sparc_set_interrupt_level( _newlevel ) - -unsigned32 _CPU_ISR_Get_level( void ); - -/* end of ISR handler macros */ - -/* Context handler macros */ - -/* - * Initialize the context to a state suitable for starting a - * task after a context restore operation. Generally, this - * involves: - * - * - setting a starting address - * - preparing the stack - * - preparing the stack and frame pointers - * - setting the proper interrupt level in the context - * - initializing the floating point context - * - * NOTE: Implemented as a subroutine for the SPARC port. - */ - -void _CPU_Context_Initialize( - Context_Control *the_context, - unsigned32 *stack_base, - unsigned32 size, - unsigned32 new_level, - void *entry_point, - boolean is_fp -); - -/* - * This routine is responsible for somehow restarting the currently - * executing task. - * - * On the SPARC, this is is relatively painless but requires a small - * amount of wrapper code before using the regular restore code in - * of the context switch. - */ - -#define _CPU_Context_Restart_self( _the_context ) \ - _CPU_Context_restore( (_the_context) ); - -/* - * The FP context area for the SPARC is a simple structure and nothing - * special is required to find the "starting load point" - */ - -#define _CPU_Context_Fp_start( _base, _offset ) \ - ( (void *) _Addresses_Add_offset( (_base), (_offset) ) ) - -/* - * This routine initializes the FP context area passed to it to. - * - * The SPARC allows us to use the simple initialization model - * in which an "initial" FP context was saved into _CPU_Null_fp_context - * at CPU initialization and it is simply copied into the destination - * context. - */ - -#define _CPU_Context_Initialize_fp( _destination ) \ - do { \ - *((Context_Control_fp *) *((void **) _destination)) = _CPU_Null_fp_context; \ - } while (0) - -/* end of Context handler macros */ - -/* Fatal Error manager macros */ - -/* - * This routine copies _error into a known place -- typically a stack - * location or a register, optionally disables interrupts, and - * halts/stops the CPU. - */ - -#define _CPU_Fatal_halt( _error ) \ - do { \ - unsigned32 level; \ - \ - sparc_disable_interrupts( level ); \ - asm volatile ( "mov %0, %%g1 " : "=r" (level) : "0" (level) ); \ - while (1); /* loop forever */ \ - } while (0) - -/* end of Fatal Error manager macros */ - -/* Bitfield handler macros */ - -/* - * The SPARC port uses the generic C algorithm for bitfield scan if the - * CPU model does not have a scan instruction. - */ - -#if ( SPARC_HAS_BITSCAN == 0 ) -#define CPU_USE_GENERIC_BITFIELD_CODE TRUE -#define CPU_USE_GENERIC_BITFIELD_DATA TRUE -#else -#error "scan instruction not currently supported by RTEMS!!" -#endif - -/* end of Bitfield handler macros */ - -/* Priority handler handler macros */ - -/* - * The SPARC port uses the generic C algorithm for bitfield scan if the - * CPU model does not have a scan instruction. - */ - -#if ( SPARC_HAS_BITSCAN == 1 ) -#error "scan instruction not currently supported by RTEMS!!" -#endif - -/* end of Priority handler macros */ - -/* functions */ - -/* - * _CPU_Initialize - * - * This routine performs CPU dependent initialization. - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) -); - -/* - * _CPU_ISR_install_raw_handler - * - * This routine installs new_handler to be directly called from the trap - * table. - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_ISR_install_vector - * - * This routine installs an interrupt vector. - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -#if (CPU_PROVIDES_IDLE_THREAD_BODY == TRUE) - -/* - * _CPU_Thread_Idle_body - * - * Some SPARC implementations have low power, sleep, or idle modes. This - * tries to take advantage of those models. - */ - -void _CPU_Thread_Idle_body( void ); - -#endif /* CPU_PROVIDES_IDLE_THREAD_BODY */ - -/* - * _CPU_Context_switch - * - * This routine switches from the run context to the heir context. - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/* - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner. - */ - -void _CPU_Context_restore( - Context_Control *new_context -); - -/* - * _CPU_Context_save_fp - * - * This routine saves the floating point context passed to it. - */ - -void _CPU_Context_save_fp( - void **fp_context_ptr -); - -/* - * _CPU_Context_restore_fp - * - * This routine restores the floating point context passed to it. - */ - -void _CPU_Context_restore_fp( - void **fp_context_ptr -); - -/* - * CPU_swap_u32 - * - * The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. - * - * This version will work on any processor, but if you come across a better - * way for the SPARC PLEASE use it. The most common way to swap a 32-bit - * entity as shown below is not any more efficient on the SPARC. - * - * swap least significant two bytes with 16-bit rotate - * swap upper and lower 16-bits - * swap most significant two bytes with 16-bit rotate - * - * It is not obvious how the SPARC can do significantly better than the - * generic code. gcc 2.7.0 only generates about 12 instructions for the - * following code at optimization level four (i.e. -O4). - */ - -static inline unsigned int CPU_swap_u32( - unsigned int value -) -{ - unsigned32 byte1, byte2, byte3, byte4, swapped; - - byte4 = (value >> 24) & 0xff; - byte3 = (value >> 16) & 0xff; - byte2 = (value >> 8) & 0xff; - byte1 = value & 0xff; - - swapped = (byte1 << 24) | (byte2 << 16) | (byte3 << 8) | byte4; - return( swapped ); -} - -#define CPU_swap_u16( value ) \ - (((value&0xff) << 8) | ((value >> 8)&0xff)) - -#endif ASM - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/c/src/exec/score/cpu/sparc/cpu_asm.s b/c/src/exec/score/cpu/sparc/cpu_asm.s deleted file mode 100644 index 39962eedeb..0000000000 --- a/c/src/exec/score/cpu/sparc/cpu_asm.s +++ /dev/null @@ -1,726 +0,0 @@ -/* cpu_asm.s - * - * This file contains the basic algorithms for all assembly code used - * in an specific CPU port of RTEMS. These algorithms must be implemented - * in assembly language. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * Ported to ERC32 implementation of the SPARC by On-Line Applications - * Research Corporation (OAR) under contract to the European Space - * Agency (ESA). - * - * ERC32 modifications of respective RTEMS file: COPYRIGHT (c) 1995. - * European Space Agency. - * - * $Id$ - */ - -#include <asm.h> - -#if (SPARC_HAS_FPU == 1) - -/* - * void _CPU_Context_save_fp( - * void **fp_context_ptr - * ) - * - * This routine is responsible for saving the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * NOTE: See the README in this directory for information on the - * management of the "EF" bit in the PSR. - */ - - .align 4 - PUBLIC(_CPU_Context_save_fp) -SYM(_CPU_Context_save_fp): - save %sp, -CPU_MINIMUM_STACK_FRAME_SIZE, %sp - - /* - * The following enables the floating point unit. - */ - - mov %psr, %l0 - sethi %hi(SPARC_PSR_EF_MASK), %l1 - or %l1, %lo(SPARC_PSR_EF_MASK), %l1 - or %l0, %l1, %l0 - mov %l0, %psr ! **** ENABLE FLOAT ACCESS **** - - ld [%i0], %l0 - std %f0, [%l0 + FO_F1_OFFSET] - std %f2, [%l0 + F2_F3_OFFSET] - std %f4, [%l0 + F4_F5_OFFSET] - std %f6, [%l0 + F6_F7_OFFSET] - std %f8, [%l0 + F8_F9_OFFSET] - std %f10, [%l0 + F1O_F11_OFFSET] - std %f12, [%l0 + F12_F13_OFFSET] - std %f14, [%l0 + F14_F15_OFFSET] - std %f16, [%l0 + F16_F17_OFFSET] - std %f18, [%l0 + F18_F19_OFFSET] - std %f20, [%l0 + F2O_F21_OFFSET] - std %f22, [%l0 + F22_F23_OFFSET] - std %f24, [%l0 + F24_F25_OFFSET] - std %f26, [%l0 + F26_F27_OFFSET] - std %f28, [%l0 + F28_F29_OFFSET] - std %f30, [%l0 + F3O_F31_OFFSET] - st %fsr, [%l0 + FSR_OFFSET] - ret - restore - -/* - * void _CPU_Context_restore_fp( - * void **fp_context_ptr - * ) - * - * This routine is responsible for restoring the FP context - * at *fp_context_ptr. If the point to load the FP context - * from is changed then the pointer is modified by this routine. - * - * NOTE: See the README in this directory for information on the - * management of the "EF" bit in the PSR. - */ - - .align 4 - PUBLIC(_CPU_Context_restore_fp) -SYM(_CPU_Context_restore_fp): - save %sp, -CPU_MINIMUM_STACK_FRAME_SIZE , %sp - - /* - * The following enables the floating point unit. - */ - - mov %psr, %l0 - sethi %hi(SPARC_PSR_EF_MASK), %l1 - or %l1, %lo(SPARC_PSR_EF_MASK), %l1 - or %l0, %l1, %l0 - mov %l0, %psr ! **** ENABLE FLOAT ACCESS **** - - ld [%i0], %l0 - ldd [%l0 + FO_F1_OFFSET], %f0 - ldd [%l0 + F2_F3_OFFSET], %f2 - ldd [%l0 + F4_F5_OFFSET], %f4 - ldd [%l0 + F6_F7_OFFSET], %f6 - ldd [%l0 + F8_F9_OFFSET], %f8 - ldd [%l0 + F1O_F11_OFFSET], %f10 - ldd [%l0 + F12_F13_OFFSET], %f12 - ldd [%l0 + F14_F15_OFFSET], %f14 - ldd [%l0 + F16_F17_OFFSET], %f16 - ldd [%l0 + F18_F19_OFFSET], %f18 - ldd [%l0 + F2O_F21_OFFSET], %f20 - ldd [%l0 + F22_F23_OFFSET], %f22 - ldd [%l0 + F24_F25_OFFSET], %f24 - ldd [%l0 + F26_F27_OFFSET], %f26 - ldd [%l0 + F28_F29_OFFSET], %f28 - ldd [%l0 + F3O_F31_OFFSET], %f30 - ld [%l0 + FSR_OFFSET], %fsr - ret - restore - -#endif /* SPARC_HAS_FPU */ - -/* - * void _CPU_Context_switch( - * Context_Control *run, - * Context_Control *heir - * ) - * - * This routine performs a normal non-FP context switch. - */ - - .align 4 - PUBLIC(_CPU_Context_switch) -SYM(_CPU_Context_switch): - ! skip g0 - st %g1, [%o0 + G1_OFFSET] ! save the global registers - std %g2, [%o0 + G2_OFFSET] - std %g4, [%o0 + G4_OFFSET] - std %g6, [%o0 + G6_OFFSET] - - std %l0, [%o0 + L0_OFFSET] ! save the local registers - std %l2, [%o0 + L2_OFFSET] - std %l4, [%o0 + L4_OFFSET] - std %l6, [%o0 + L6_OFFSET] - - std %i0, [%o0 + I0_OFFSET] ! save the input registers - std %i2, [%o0 + I2_OFFSET] - std %i4, [%o0 + I4_OFFSET] - std %i6, [%o0 + I6_FP_OFFSET] - - std %o0, [%o0 + O0_OFFSET] ! save the output registers - std %o2, [%o0 + O2_OFFSET] - std %o4, [%o0 + O4_OFFSET] - std %o6, [%o0 + O6_SP_OFFSET] - - rd %psr, %o2 - st %o2, [%o0 + PSR_OFFSET] ! save status register - - /* - * This is entered from _CPU_Context_restore with: - * o1 = context to restore - * o2 = psr - */ - - PUBLIC(_CPU_Context_restore_heir) -SYM(_CPU_Context_restore_heir): - /* - * Flush all windows with valid contents except the current one. - * In examining the set register windows, one may logically divide - * the windows into sets (some of which may be empty) based on their - * current status: - * - * + current (i.e. in use), - * + used (i.e. a restore would not trap) - * + invalid (i.e. 1 in corresponding bit in WIM) - * + unused - * - * Either the used or unused set of windows may be empty. - * - * NOTE: We assume only one bit is set in the WIM at a time. - * - * Given a CWP of 5 and a WIM of 0x1, the registers are divided - * into sets as follows: - * - * + 0 - invalid - * + 1-4 - unused - * + 5 - current - * + 6-7 - used - * - * In this case, we only would save the used windows -- 6 and 7. - * - * Traps are disabled for the same logical period as in a - * flush all windows trap handler. - * - * Register Usage while saving the windows: - * g1 = current PSR - * g2 = current wim - * g3 = CWP - * g4 = wim scratch - * g5 = scratch - */ - - ld [%o1 + PSR_OFFSET], %g1 ! g1 = saved psr - - and %o2, SPARC_PSR_CWP_MASK, %g3 ! g3 = CWP - ! g1 = psr w/o cwp - andn %g1, SPARC_PSR_ET_MASK | SPARC_PSR_CWP_MASK, %g1 - or %g1, %g3, %g1 ! g1 = heirs psr - mov %g1, %psr ! restore status register and - ! **** DISABLE TRAPS **** - mov %wim, %g2 ! g2 = wim - mov 1, %g4 - sll %g4, %g3, %g4 ! g4 = WIM mask for CW invalid - -save_frame_loop: - sll %g4, 1, %g5 ! rotate the "wim" left 1 - srl %g4, SPARC_NUMBER_OF_REGISTER_WINDOWS - 1, %g4 - or %g4, %g5, %g4 ! g4 = wim if we do one restore - - /* - * If a restore would not underflow, then continue. - */ - - andcc %g4, %g2, %g0 ! Any windows to flush? - bnz done_flushing ! No, then continue - nop - - restore ! back one window - - /* - * Now save the window just as if we overflowed to it. - */ - - std %l0, [%sp + CPU_STACK_FRAME_L0_OFFSET] - std %l2, [%sp + CPU_STACK_FRAME_L2_OFFSET] - std %l4, [%sp + CPU_STACK_FRAME_L4_OFFSET] - std %l6, [%sp + CPU_STACK_FRAME_L6_OFFSET] - - std %i0, [%sp + CPU_STACK_FRAME_I0_OFFSET] - std %i2, [%sp + CPU_STACK_FRAME_I2_OFFSET] - std %i4, [%sp + CPU_STACK_FRAME_I4_OFFSET] - std %i6, [%sp + CPU_STACK_FRAME_I6_FP_OFFSET] - - ba save_frame_loop - nop - -done_flushing: - - add %g3, 1, %g3 ! calculate desired WIM - and %g3, SPARC_NUMBER_OF_REGISTER_WINDOWS - 1, %g3 - mov 1, %g4 - sll %g4, %g3, %g4 ! g4 = new WIM - mov %g4, %wim - - or %g1, SPARC_PSR_ET_MASK, %g1 - mov %g1, %psr ! **** ENABLE TRAPS **** - ! and restore CWP - nop - nop - nop - - ! skip g0 - ld [%o1 + G1_OFFSET], %g1 ! restore the global registers - ldd [%o1 + G2_OFFSET], %g2 - ldd [%o1 + G4_OFFSET], %g4 - ldd [%o1 + G6_OFFSET], %g6 - - ldd [%o1 + L0_OFFSET], %l0 ! restore the local registers - ldd [%o1 + L2_OFFSET], %l2 - ldd [%o1 + L4_OFFSET], %l4 - ldd [%o1 + L6_OFFSET], %l6 - - ldd [%o1 + I0_OFFSET], %i0 ! restore the output registers - ldd [%o1 + I2_OFFSET], %i2 - ldd [%o1 + I4_OFFSET], %i4 - ldd [%o1 + I6_FP_OFFSET], %i6 - - ldd [%o1 + O2_OFFSET], %o2 ! restore the output registers - ldd [%o1 + O4_OFFSET], %o4 - ldd [%o1 + O6_SP_OFFSET], %o6 - ! do o0/o1 last to avoid destroying heir context pointer - ldd [%o1 + O0_OFFSET], %o0 ! overwrite heir pointer - - jmp %o7 + 8 ! return - nop ! delay slot - -/* - * void _CPU_Context_restore( - * Context_Control *new_context - * ) - * - * This routine is generally used only to perform restart self. - * - * NOTE: It is unnecessary to reload some registers. - */ - - .align 4 - PUBLIC(_CPU_Context_restore) -SYM(_CPU_Context_restore): - save %sp, -CPU_MINIMUM_STACK_FRAME_SIZE, %sp - rd %psr, %o2 - ba SYM(_CPU_Context_restore_heir) - mov %i0, %o1 ! in the delay slot - -/* - * void _ISR_Handler() - * - * This routine provides the RTEMS interrupt management. - * - * We enter this handler from the 4 instructions in the trap table with - * the following registers assumed to be set as shown: - * - * l0 = PSR - * l1 = PC - * l2 = nPC - * l3 = trap type - * - * NOTE: By an executive defined convention, trap type is between 0 and 255 if - * it is an asynchonous trap and 256 and 511 if it is synchronous. - */ - - .align 4 - PUBLIC(_ISR_Handler) -SYM(_ISR_Handler): - /* - * Fix the return address for synchronous traps. - */ - - andcc %l3, SPARC_SYNCHRONOUS_TRAP_BIT_MASK, %g0 - ! Is this a synchronous trap? - be,a win_ovflow ! No, then skip the adjustment - nop ! DELAY - mov %l2, %l1 ! do not return to the instruction - add %l2, 4, %l2 ! indicated - -win_ovflow: - /* - * Save the globals this block uses. - * - * These registers are not restored from the locals. Their contents - * are saved directly from the locals into the ISF below. - */ - - mov %g4, %l4 ! save the globals this block uses - mov %g5, %l5 - - /* - * When at a "window overflow" trap, (wim == (1 << cwp)). - * If we get here like that, then process a window overflow. - */ - - rd %wim, %g4 - srl %g4, %l0, %g5 ! g5 = win >> cwp ; shift count and CWP - ! are LS 5 bits ; how convenient :) - cmp %g5, 1 ! Is this an invalid window? - bne dont_do_the_window ! No, then skip all this stuff - ! we are using the delay slot - - /* - * The following is same as a 1 position right rotate of WIM - */ - - srl %g4, 1, %g5 ! g5 = WIM >> 1 - sll %g4, SPARC_NUMBER_OF_REGISTER_WINDOWS-1 , %g4 - ! g4 = WIM << (Number Windows - 1) - or %g4, %g5, %g4 ! g4 = (WIM >> 1) | - ! (WIM << (Number Windows - 1)) - - /* - * At this point: - * - * g4 = the new WIM - * g5 is free - */ - - /* - * Since we are tinkering with the register windows, we need to - * make sure that all the required information is in global registers. - */ - - save ! Save into the window - wr %g4, 0, %wim ! WIM = new WIM - nop ! delay slots - nop - nop - - /* - * Now save the window just as if we overflowed to it. - */ - - std %l0, [%sp + CPU_STACK_FRAME_L0_OFFSET] - std %l2, [%sp + CPU_STACK_FRAME_L2_OFFSET] - std %l4, [%sp + CPU_STACK_FRAME_L4_OFFSET] - std %l6, [%sp + CPU_STACK_FRAME_L6_OFFSET] - - std %i0, [%sp + CPU_STACK_FRAME_I0_OFFSET] - std %i2, [%sp + CPU_STACK_FRAME_I2_OFFSET] - std %i4, [%sp + CPU_STACK_FRAME_I4_OFFSET] - std %i6, [%sp + CPU_STACK_FRAME_I6_FP_OFFSET] - - restore - nop - -dont_do_the_window: - /* - * Global registers %g4 and %g5 are saved directly from %l4 and - * %l5 directly into the ISF below. - */ - -save_isf: - - /* - * Save the state of the interrupted task -- especially the global - * registers -- in the Interrupt Stack Frame. Note that the ISF - * includes a regular minimum stack frame which will be used if - * needed by register window overflow and underflow handlers. - * - * REGISTERS SAME AS AT _ISR_Handler - */ - - sub %fp, CONTEXT_CONTROL_INTERRUPT_FRAME_SIZE, %sp - ! make space for ISF - - std %l0, [%sp + ISF_PSR_OFFSET] ! save psr, PC - st %l2, [%sp + ISF_NPC_OFFSET] ! save nPC - st %g1, [%sp + ISF_G1_OFFSET] ! save g1 - std %g2, [%sp + ISF_G2_OFFSET] ! save g2, g3 - std %l4, [%sp + ISF_G4_OFFSET] ! save g4, g5 -- see above - std %g6, [%sp + ISF_G6_OFFSET] ! save g6, g7 - - std %i0, [%sp + ISF_I0_OFFSET] ! save i0, i1 - std %i2, [%sp + ISF_I2_OFFSET] ! save i2, i3 - std %i4, [%sp + ISF_I4_OFFSET] ! save i4, i5 - std %i6, [%sp + ISF_I6_FP_OFFSET] ! save i6/fp, i7 - - rd %y, %g1 - st %g1, [%sp + ISF_Y_OFFSET] ! save y - - mov %sp, %o1 ! 2nd arg to ISR Handler - - /* - * Increment ISR nest level and Thread dispatch disable level. - * - * Register usage for this section: - * - * l4 = _Thread_Dispatch_disable_level pointer - * l5 = _ISR_Nest_level pointer - * l6 = _Thread_Dispatch_disable_level value - * l7 = _ISR_Nest_level value - * - * NOTE: It is assumed that l4 - l7 will be preserved until the ISR - * nest and thread dispatch disable levels are unnested. - */ - - sethi %hi(SYM(_Thread_Dispatch_disable_level)), %l4 - ld [%l4 + %lo(SYM(_Thread_Dispatch_disable_level))], %l6 - sethi %hi(SYM(_ISR_Nest_level)), %l5 - ld [%l5 + %lo(SYM(_ISR_Nest_level))], %l7 - - add %l6, 1, %l6 - st %l6, [%l4 + %lo(SYM(_Thread_Dispatch_disable_level))] - - add %l7, 1, %l7 - st %l7, [%l5 + %lo(SYM(_ISR_Nest_level))] - - /* - * If ISR nest level was zero (now 1), then switch stack. - */ - - mov %sp, %fp - subcc %l7, 1, %l7 ! outermost interrupt handler? - bnz dont_switch_stacks ! No, then do not switch stacks - - sethi %hi(SYM(_CPU_Interrupt_stack_high)), %g4 - ld [%g4 + %lo(SYM(_CPU_Interrupt_stack_high))], %sp - -dont_switch_stacks: - /* - * Make sure we have a place on the stack for the window overflow - * trap handler to write into. At this point it is safe to - * enable traps again. - */ - - sub %sp, CPU_MINIMUM_STACK_FRAME_SIZE, %sp - - /* - * Check if we have an external interrupt (trap 0x11 - 0x1f). If so, - * set the PIL in the %psr to mask off interrupts with lower priority. - * The original %psr in %l0 is not modified since it will be restored - * when the interrupt handler returns. - */ - - mov %l0, %g5 - subcc %l3, 0x11, %g0 - bl dont_fix_pil - subcc %l3, 0x1f, %g0 - bg dont_fix_pil - sll %l3, 8, %g4 - and %g4, SPARC_PSR_PIL_MASK, %g4 - andn %l0, SPARC_PSR_PIL_MASK, %g5 - or %g4, %g5, %g5 -dont_fix_pil: - wr %g5, SPARC_PSR_ET_MASK, %psr ! **** ENABLE TRAPS **** - - /* - * Vector to user's handler. - * - * NOTE: TBR may no longer have vector number in it since - * we just enabled traps. It is definitely in l3. - */ - - sethi %hi(SYM(_ISR_Vector_table)), %g4 - or %g4, %lo(SYM(_ISR_Vector_table)), %g4 - and %l3, 0xFF, %g5 ! remove synchronous trap indicator - sll %g5, 2, %g5 ! g5 = offset into table - ld [%g4 + %g5], %g4 ! g4 = _ISR_Vector_table[ vector ] - - - ! o1 = 2nd arg = address of the ISF - ! WAS LOADED WHEN ISF WAS SAVED!!! - mov %l3, %o0 ! o0 = 1st arg = vector number - call %g4, 0 - nop ! delay slot - - /* - * Redisable traps so we can finish up the interrupt processing. - * This is a VERY conservative place to do this. - * - * NOTE: %l0 has the PSR which was in place when we took the trap. - */ - - mov %l0, %psr ! **** DISABLE TRAPS **** - - /* - * Decrement ISR nest level and Thread dispatch disable level. - * - * Register usage for this section: - * - * l4 = _Thread_Dispatch_disable_level pointer - * l5 = _ISR_Nest_level pointer - * l6 = _Thread_Dispatch_disable_level value - * l7 = _ISR_Nest_level value - */ - - sub %l6, 1, %l6 - st %l6, [%l4 + %lo(SYM(_Thread_Dispatch_disable_level))] - - st %l7, [%l5 + %lo(SYM(_ISR_Nest_level))] - - /* - * If dispatching is disabled (includes nested interrupt case), - * then do a "simple" exit. - */ - - orcc %l6, %g0, %g0 ! Is dispatching disabled? - bnz simple_return ! Yes, then do a "simple" exit - nop ! delay slot - - /* - * If a context switch is necessary, then do fudge stack to - * return to the interrupt dispatcher. - */ - - sethi %hi(SYM(_Context_Switch_necessary)), %l4 - ld [%l4 + %lo(SYM(_Context_Switch_necessary))], %l5 - - orcc %l5, %g0, %g0 ! Is thread switch necessary? - bnz SYM(_ISR_Dispatch) ! yes, then invoke the dispatcher - nop ! delay slot - - /* - * Finally, check to see if signals were sent to the currently - * executing task. If so, we need to invoke the interrupt dispatcher. - */ - - sethi %hi(SYM(_ISR_Signals_to_thread_executing)), %l6 - ld [%l6 + %lo(SYM(_ISR_Signals_to_thread_executing))], %l7 - - orcc %l7, %g0, %g0 ! Were signals sent to the currently - ! executing thread? - bz simple_return ! yes, then invoke the dispatcher - ! use the delay slot to clear the signals - ! to the currently executing task flag - st %g0, [%l6 + %lo(SYM(_ISR_Signals_to_thread_executing))] - - - /* - * Invoke interrupt dispatcher. - */ - - PUBLIC(_ISR_Dispatch) -SYM(_ISR_Dispatch): - - /* - * The following subtract should get us back on the interrupted - * tasks stack and add enough room to invoke the dispatcher. - * When we enable traps, we are mostly back in the context - * of the task and subsequent interrupts can operate normally. - */ - - sub %fp, CPU_MINIMUM_STACK_FRAME_SIZE, %sp - - or %l0, SPARC_PSR_ET_MASK, %l7 ! l7 = PSR with ET=1 - mov %l7, %psr ! **** ENABLE TRAPS **** - nop - nop - nop - - call SYM(_Thread_Dispatch), 0 - nop - - /* - * The CWP in place at this point may be different from - * that which was in effect at the beginning of the ISR if we - * have been context switched between the beginning of this invocation - * of _ISR_Handler and this point. Thus the CWP and WIM should - * not be changed back to their values at ISR entry time. Any - * changes to the PSR must preserve the CWP. - */ - -simple_return: - ld [%fp + ISF_Y_OFFSET], %l5 ! restore y - wr %l5, 0, %y - - ldd [%fp + ISF_PSR_OFFSET], %l0 ! restore psr, PC - ld [%fp + ISF_NPC_OFFSET], %l2 ! restore nPC - rd %psr, %l3 - and %l3, SPARC_PSR_CWP_MASK, %l3 ! want "current" CWP - andn %l0, SPARC_PSR_CWP_MASK, %l0 ! want rest from task - or %l3, %l0, %l0 ! install it later... - andn %l0, SPARC_PSR_ET_MASK, %l0 - - /* - * Restore tasks global and out registers - */ - - mov %fp, %g1 - - ! g1 is restored later - ldd [%fp + ISF_G2_OFFSET], %g2 ! restore g2, g3 - ldd [%fp + ISF_G4_OFFSET], %g4 ! restore g4, g5 - ldd [%fp + ISF_G6_OFFSET], %g6 ! restore g6, g7 - - ldd [%fp + ISF_I0_OFFSET], %i0 ! restore i0, i1 - ldd [%fp + ISF_I2_OFFSET], %i2 ! restore i2, i3 - ldd [%fp + ISF_I4_OFFSET], %i4 ! restore i4, i5 - ldd [%fp + ISF_I6_FP_OFFSET], %i6 ! restore i6/fp, i7 - - /* - * Registers: - * - * ALL global registers EXCEPT G1 and the input registers have - * already been restored and thuse off limits. - * - * The following is the contents of the local registers: - * - * l0 = original psr - * l1 = return address (i.e. PC) - * l2 = nPC - * l3 = CWP - */ - - /* - * if (CWP + 1) is an invalid window then we need to reload it. - * - * WARNING: Traps should now be disabled - */ - - mov %l0, %psr ! **** DISABLE TRAPS **** - nop - nop - nop - rd %wim, %l4 - add %l0, 1, %l6 ! l6 = cwp + 1 - and %l6, SPARC_PSR_CWP_MASK, %l6 ! do the modulo on it - srl %l4, %l6, %l5 ! l5 = win >> cwp + 1 ; shift count - ! and CWP are conveniently LS 5 bits - cmp %l5, 1 ! Is tasks window invalid? - bne good_task_window - - /* - * The following code is the same as a 1 position left rotate of WIM. - */ - - sll %l4, 1, %l5 ! l5 = WIM << 1 - srl %l4, SPARC_NUMBER_OF_REGISTER_WINDOWS-1 , %l4 - ! l4 = WIM >> (Number Windows - 1) - or %l4, %l5, %l4 ! l4 = (WIM << 1) | - ! (WIM >> (Number Windows - 1)) - - /* - * Now restore the window just as if we underflowed to it. - */ - - wr %l4, 0, %wim ! WIM = new WIM - nop ! must delay after writing WIM - nop - nop - restore ! now into the tasks window - - ldd [%g1 + CPU_STACK_FRAME_L0_OFFSET], %l0 - ldd [%g1 + CPU_STACK_FRAME_L2_OFFSET], %l2 - ldd [%g1 + CPU_STACK_FRAME_L4_OFFSET], %l4 - ldd [%g1 + CPU_STACK_FRAME_L6_OFFSET], %l6 - ldd [%g1 + CPU_STACK_FRAME_I0_OFFSET], %i0 - ldd [%g1 + CPU_STACK_FRAME_I2_OFFSET], %i2 - ldd [%g1 + CPU_STACK_FRAME_I4_OFFSET], %i4 - ldd [%g1 + CPU_STACK_FRAME_I6_FP_OFFSET], %i6 - ! reload of sp clobbers ISF - save ! Back to ISR dispatch window - -good_task_window: - - mov %l0, %psr ! **** DISABLE TRAPS **** - ! and restore condition codes. - ld [%g1 + ISF_G1_OFFSET], %g1 ! restore g1 - jmp %l1 ! transfer control and - rett %l2 ! go back to tasks window - -/* end of file */ diff --git a/c/src/exec/score/cpu/sparc/erc32.h b/c/src/exec/score/cpu/sparc/erc32.h deleted file mode 100644 index 50df21267f..0000000000 --- a/c/src/exec/score/cpu/sparc/erc32.h +++ /dev/null @@ -1,521 +0,0 @@ -/* erc32.h - * - * This include file contains information pertaining to the ERC32. - * The ERC32 is a custom SPARC V7 implementation based on the Cypress - * 601/602 chipset. This CPU has a number of on-board peripherals and - * was developed by the European Space Agency to target space applications. - * - * NOTE: Other than where absolutely required, this version currently - * supports only the peripherals and bits used by the basic board - * support package. This includes at least significant pieces of - * the following items: - * - * + UART Channels A and B - * + General Purpose Timer - * + Real Time Clock - * + Watchdog Timer (so it can be disabled) - * + Control Register (so powerdown mode can be enabled) - * + Memory Control Register - * + Interrupt Control - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * Ported to ERC32 implementation of the SPARC by On-Line Applications - * Research Corporation (OAR) under contract to the European Space - * Agency (ESA). - * - * ERC32 modifications of respective RTEMS file: COPYRIGHT (c) 1995. - * European Space Agency. - * - * $Id$ - */ - -#ifndef _INCLUDE_ERC32_h -#define _INCLUDE_ERC32_h - -#include <rtems/score/sparc.h> - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * Interrupt Sources - * - * The interrupt source numbers directly map to the trap type and to - * the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask, - * and the Interrupt Pending Registers. - */ - -#define ERC32_INTERRUPT_MASKED_ERRORS 1 -#define ERC32_INTERRUPT_EXTERNAL_1 2 -#define ERC32_INTERRUPT_EXTERNAL_2 3 -#define ERC32_INTERRUPT_UART_A_RX_TX 4 -#define ERC32_INTERRUPT_UART_B_RX_TX 5 -#define ERC32_INTERRUPT_CORRECTABLE_MEMORY_ERROR 6 -#define ERC32_INTERRUPT_UART_ERROR 7 -#define ERC32_INTERRUPT_DMA_ACCESS_ERROR 8 -#define ERC32_INTERRUPT_DMA_TIMEOUT 9 -#define ERC32_INTERRUPT_EXTERNAL_3 10 -#define ERC32_INTERRUPT_EXTERNAL_4 11 -#define ERC32_INTERRUPT_GENERAL_PURPOSE_TIMER 12 -#define ERC32_INTERRUPT_REAL_TIME_CLOCK 13 -#define ERC32_INTERRUPT_EXTERNAL_5 14 -#define ERC32_INTERRUPT_WATCHDOG_TIMEOUT 15 - -#ifndef ASM - -/* - * Trap Types for on-chip peripherals - * - * Source: Table 8 - Interrupt Trap Type and Default Priority Assignments - * - * NOTE: The priority level for each source corresponds to the least - * significant nibble of the trap type. - */ - -#define ERC32_TRAP_TYPE( _source ) SPARC_ASYNCHRONOUS_TRAP((_source) + 0x10) - -#define ERC32_TRAP_SOURCE( _trap ) ((_trap) - 0x10) - -#define ERC32_Is_MEC_Trap( _trap ) \ - ( (_trap) >= ERC32_TRAP_TYPE( ERC32_INTERRUPT_MASKED_ERRORS ) && \ - (_trap) <= ERC32_TRAP_TYPE( ERC32_INTERRUPT_WATCHDOG_TIMEOUT ) ) - -/* - * Structure for ERC32 memory mapped registers. - * - * Source: Section 3.25.2 - Register Address Map - * - * NOTE: There is only one of these structures per CPU, its base address - * is 0x01f80000, and the variable MEC is placed there by the - * linkcmds file. - */ - -typedef struct { - volatile unsigned32 Control; /* offset 0x00 */ - volatile unsigned32 Software_Reset; /* offset 0x04 */ - volatile unsigned32 Power_Down; /* offset 0x08 */ - volatile unsigned32 Unimplemented_0; /* offset 0x0c */ - volatile unsigned32 Memory_Configuration; /* offset 0x10 */ - volatile unsigned32 IO_Configuration; /* offset 0x14 */ - volatile unsigned32 Wait_State_Configuration; /* offset 0x18 */ - volatile unsigned32 Unimplemented_1; /* offset 0x1c */ - volatile unsigned32 Memory_Access_0; /* offset 0x20 */ - volatile unsigned32 Memory_Access_1; /* offset 0x24 */ - volatile unsigned32 Unimplemented_2[ 7 ]; /* offset 0x28 */ - volatile unsigned32 Interrupt_Shape; /* offset 0x44 */ - volatile unsigned32 Interrupt_Pending; /* offset 0x48 */ - volatile unsigned32 Interrupt_Mask; /* offset 0x4c */ - volatile unsigned32 Interrupt_Clear; /* offset 0x50 */ - volatile unsigned32 Interrupt_Force; /* offset 0x54 */ - volatile unsigned32 Unimplemented_3[ 2 ]; /* offset 0x58 */ - /* offset 0x60 */ - volatile unsigned32 Watchdog_Program_and_Timeout_Acknowledge; - volatile unsigned32 Watchdog_Trap_Door_Set; /* offset 0x64 */ - volatile unsigned32 Unimplemented_4[ 6 ]; /* offset 0x68 */ - volatile unsigned32 Real_Time_Clock_Counter; /* offset 0x80 */ - volatile unsigned32 Real_Time_Clock_Scalar; /* offset 0x84 */ - volatile unsigned32 General_Purpose_Timer_Counter; /* offset 0x88 */ - volatile unsigned32 General_Purpose_Timer_Scalar; /* offset 0x8c */ - volatile unsigned32 Unimplemented_5[ 2 ]; /* offset 0x90 */ - volatile unsigned32 Timer_Control; /* offset 0x98 */ - volatile unsigned32 Unimplemented_6; /* offset 0x9c */ - volatile unsigned32 System_Fault_Status; /* offset 0xa0 */ - volatile unsigned32 First_Failing_Address; /* offset 0xa4 */ - volatile unsigned32 First_Failing_Data; /* offset 0xa8 */ - volatile unsigned32 First_Failing_Syndrome_and_Check_Bits;/* offset 0xac */ - volatile unsigned32 Error_and_Reset_Status; /* offset 0xb0 */ - volatile unsigned32 Error_Mask; /* offset 0xb4 */ - volatile unsigned32 Unimplemented_7[ 2 ]; /* offset 0xb8 */ - volatile unsigned32 Debug_Control; /* offset 0xc0 */ - volatile unsigned32 Breakpoint; /* offset 0xc4 */ - volatile unsigned32 Watchpoint; /* offset 0xc8 */ - volatile unsigned32 Unimplemented_8; /* offset 0xcc */ - volatile unsigned32 Test_Control; /* offset 0xd0 */ - volatile unsigned32 Test_Data; /* offset 0xd4 */ - volatile unsigned32 Unimplemented_9[ 2 ]; /* offset 0xd8 */ - volatile unsigned32 UART_Channel_A; /* offset 0xe0 */ - volatile unsigned32 UART_Channel_B; /* offset 0xe4 */ - volatile unsigned32 UART_Status; /* offset 0xe8 */ -} ERC32_Register_Map; - -#endif - -/* - * The following constants are intended to be used ONLY in assembly - * language files. - * - * NOTE: The intended style of usage is to load the address of MEC - * into a register and then use these as displacements from - * that register. - */ - -#ifdef ASM - -#define ERC32_MEC_CONTROL_OFFSET 0x00 -#define ERC32_MEC_SOFTWARE_RESET_OFFSET 0x04 -#define ERC32_MEC_POWER_DOWN_OFFSET 0x08 -#define ERC32_MEC_UNIMPLEMENTED_0_OFFSET 0x0C -#define ERC32_MEC_MEMORY_CONFIGURATION_OFFSET 0x10 -#define ERC32_MEC_IO_CONFIGURATION_OFFSET 0x14 -#define ERC32_MEC_WAIT_STATE_CONFIGURATION_OFFSET 0x18 -#define ERC32_MEC_UNIMPLEMENTED_1_OFFSET 0x1C -#define ERC32_MEC_MEMORY_ACCESS_0_OFFSET 0x20 -#define ERC32_MEC_MEMORY_ACCESS_1_OFFSET 0x24 -#define ERC32_MEC_UNIMPLEMENTED_2_OFFSET 0x28 -#define ERC32_MEC_INTERRUPT_SHAPE_OFFSET 0x44 -#define ERC32_MEC_INTERRUPT_PENDING_OFFSET 0x48 -#define ERC32_MEC_INTERRUPT_MASK_OFFSET 0x4C -#define ERC32_MEC_INTERRUPT_CLEAR_OFFSET 0x50 -#define ERC32_MEC_INTERRUPT_FORCE_OFFSET 0x54 -#define ERC32_MEC_UNIMPLEMENTED_3_OFFSET 0x58 -#define ERC32_MEC_WATCHDOG_PROGRAM_AND_TIMEOUT_ACKNOWLEDGE_OFFSET 0x60 -#define ERC32_MEC_WATCHDOG_TRAP_DOOR_SET_OFFSET 0x64 -#define ERC32_MEC_UNIMPLEMENTED_4_OFFSET 0x6C -#define ERC32_MEC_REAL_TIME_CLOCK_COUNTER_OFFSET 0x80 -#define ERC32_MEC_REAL_TIME_CLOCK_SCALAR_OFFSET 0x84 -#define ERC32_MEC_GENERAL_PURPOSE_TIMER_COUNTER_OFFSET 0x88 -#define ERC32_MEC_GENERAL_PURPOSE_TIMER_SCALAR_OFFSET 0x8C -#define ERC32_MEC_UNIMPLEMENTED_5_OFFSET 0x90 -#define ERC32_MEC_TIMER_CONTROL_OFFSET 0x98 -#define ERC32_MEC_UNIMPLEMENTED_6_OFFSET 0x9C -#define ERC32_MEC_SYSTEM_FAULT_STATUS_OFFSET 0xA0 -#define ERC32_MEC_FIRST_FAILING_ADDRESS_OFFSET 0xA4 -#define ERC32_MEC_FIRST_FAILING_DATA_OFFSET 0xA8 -#define ERC32_MEC_FIRST_FAILING_SYNDROME_AND_CHECK_BITS_OFFSET 0xAC -#define ERC32_MEC_ERROR_AND_RESET_STATUS_OFFSET 0xB0 -#define ERC32_MEC_ERROR_MASK_OFFSET 0xB4 -#define ERC32_MEC_UNIMPLEMENTED_7_OFFSET 0xB8 -#define ERC32_MEC_DEBUG_CONTROL_OFFSET 0xC0 -#define ERC32_MEC_BREAKPOINT_OFFSET 0xC4 -#define ERC32_MEC_WATCHPOINT_OFFSET 0xC8 -#define ERC32_MEC_UNIMPLEMENTED_8_OFFSET 0xCC -#define ERC32_MEC_TEST_CONTROL_OFFSET 0xD0 -#define ERC32_MEC_TEST_DATA_OFFSET 0xD4 -#define ERC32_MEC_UNIMPLEMENTED_9_OFFSET 0xD8 -#define ERC32_MEC_UART_CHANNEL_A_OFFSET 0xE0 -#define ERC32_MEC_UART_CHANNEL_B_OFFSET 0xE4 -#define ERC32_MEC_UART_STATUS_OFFSET 0xE8 - -#endif - -/* - * The following defines the bits in the Configuration Register. - */ - -#define ERC32_CONFIGURATION_POWER_DOWN_MASK 0x00000001 -#define ERC32_CONFIGURATION_POWER_DOWN_ALLOWED 0x00000001 -#define ERC32_CONFIGURATION_POWER_DOWN_DISABLED 0x00000000 - -#define ERC32_CONFIGURATION_SOFTWARE_RESET_MASK 0x00000002 -#define ERC32_CONFIGURATION_SOFTWARE_RESET_ALLOWED 0x00000002 -#define ERC32_CONFIGURATION_SOFTWARE_RESET_DISABLED 0x00000000 - -#define ERC32_CONFIGURATION_BUS_TIMEOUT_MASK 0x00000004 -#define ERC32_CONFIGURATION_BUS_TIMEOUT_ENABLED 0x00000004 -#define ERC32_CONFIGURATION_BUS_TIMEOUT_DISABLED 0x00000000 - -#define ERC32_CONFIGURATION_ACCESS_PROTECTION_MASK 0x00000008 -#define ERC32_CONFIGURATION_ACCESS_PROTECTION_ENABLED 0x00000008 -#define ERC32_CONFIGURATION_ACCESS_PROTECTION_DISABLED 0x00000000 - - -/* - * The following defines the bits in the Memory Configuration Register. - */ - -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_MASK 0x00001C00 -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_256K ( 0 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_512K ( 1 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_1MB ( 2 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_2MB ( 3 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_4MB ( 4 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_8MB ( 5 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_16MB ( 6 << 10 ) -#define ERC32_MEMORY_CONFIGURATION_RAM_SIZE_32MB ( 7 << 10 ) - -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_MASK 0x001C0000 -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_128K ( 0 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_256K ( 1 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_512K ( 2 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_1M ( 3 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_2M ( 4 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_4M ( 5 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_8M ( 6 << 18 ) -#define ERC32_MEMORY_CONFIGURATION_PROM_SIZE_16M ( 7 << 18 ) - -/* - * The following defines the bits in the Timer Control Register. - */ - -#define ERC32_MEC_TIMER_CONTROL_GCR 0x00000001 /* 1 = reload at 0 */ - /* 0 = stop at 0 */ -#define ERC32_MEC_TIMER_CONTROL_GCL 0x00000002 /* 1 = load and start */ - /* 0 = no function */ -#define ERC32_MEC_TIMER_CONTROL_GSE 0x00000004 /* 1 = enable counting */ - /* 0 = hold scalar and counter */ -#define ERC32_MEC_TIMER_CONTROL_GSL 0x00000008 /* 1 = load scalar and start */ - /* 0 = no function */ - -#define ERC32_MEC_TIMER_CONTROL_RTCCR 0x00000100 /* 1 = reload at 0 */ - /* 0 = stop at 0 */ -#define ERC32_MEC_TIMER_CONTROL_RTCCL 0x00000200 /* 1 = load and start */ - /* 0 = no function */ -#define ERC32_MEC_TIMER_CONTROL_RTCSE 0x00000400 /* 1 = enable counting */ - /* 0 = hold scalar and counter */ -#define ERC32_MEC_TIMER_CONTROL_RTCSL 0x00000800 /* 1 = load scalar and start */ - /* 0 = no function */ - -/* - * The following defines the bits in the UART Control Registers. - * - */ - -#define ERC32_MEC_UART_CONTROL_RTD 0x000000FF /* RX/TX data */ - -/* - * The following defines the bits in the MEC UART Control Registers. - */ - -#define ERC32_MEC_UART_STATUS_DR 0x00000001 /* Data Ready */ -#define ERC32_MEC_UART_STATUS_TSE 0x00000002 /* TX Send Register Empty */ -#define ERC32_MEC_UART_STATUS_THE 0x00000004 /* TX Hold Register Empty */ -#define ERC32_MEC_UART_STATUS_FE 0x00000010 /* RX Framing Error */ -#define ERC32_MEC_UART_STATUS_PE 0x00000020 /* RX Parity Error */ -#define ERC32_MEC_UART_STATUS_OE 0x00000040 /* RX Overrun Error */ -#define ERC32_MEC_UART_STATUS_CU 0x00000080 /* Clear Errors */ -#define ERC32_MEC_UART_STATUS_TXE 0x00000006 /* TX Empty */ -#define ERC32_MEC_UART_STATUS_CLRA 0x00000080 /* Clear UART A */ -#define ERC32_MEC_UART_STATUS_CLRB 0x00800000 /* Clear UART B */ -#define ERC32_MEC_UART_STATUS_ERRA 0x00000070 /* Error in UART A */ -#define ERC32_MEC_UART_STATUS_ERRB 0x00700000 /* Error in UART B */ - -#define ERC32_MEC_UART_STATUS_DRA (ERC32_MEC_UART_STATUS_DR << 0) -#define ERC32_MEC_UART_STATUS_TSEA (ERC32_MEC_UART_STATUS_TSE << 0) -#define ERC32_MEC_UART_STATUS_THEA (ERC32_MEC_UART_STATUS_THE << 0) -#define ERC32_MEC_UART_STATUS_FEA (ERC32_MEC_UART_STATUS_FE << 0) -#define ERC32_MEC_UART_STATUS_PEA (ERC32_MEC_UART_STATUS_PE << 0) -#define ERC32_MEC_UART_STATUS_OEA (ERC32_MEC_UART_STATUS_OE << 0) -#define ERC32_MEC_UART_STATUS_CUA (ERC32_MEC_UART_STATUS_CU << 0) -#define ERC32_MEC_UART_STATUS_TXEA (ERC32_MEC_UART_STATUS_TXE << 0) - -#define ERC32_MEC_UART_STATUS_DRB (ERC32_MEC_UART_STATUS_DR << 16) -#define ERC32_MEC_UART_STATUS_TSEB (ERC32_MEC_UART_STATUS_TSE << 16) -#define ERC32_MEC_UART_STATUS_THEB (ERC32_MEC_UART_STATUS_THE << 16) -#define ERC32_MEC_UART_STATUS_FEB (ERC32_MEC_UART_STATUS_FE << 16) -#define ERC32_MEC_UART_STATUS_PEB (ERC32_MEC_UART_STATUS_PE << 16) -#define ERC32_MEC_UART_STATUS_OEB (ERC32_MEC_UART_STATUS_OE << 16) -#define ERC32_MEC_UART_STATUS_CUB (ERC32_MEC_UART_STATUS_CU << 16) -#define ERC32_MEC_UART_STATUS_TXEB (ERC32_MEC_UART_STATUS_TXE << 16) - -#ifndef ASM - -/* - * This is used to manipulate the on-chip registers. - * - * The following symbol must be defined in the linkcmds file and point - * to the correct location. - */ - -extern ERC32_Register_Map ERC32_MEC; - -/* - * Macros to manipulate the Interrupt Clear, Interrupt Force, Interrupt Mask, - * and the Interrupt Pending Registers. - * - * NOTE: For operations which are not atomic, this code disables interrupts - * to guarantee there are no intervening accesses to the same register. - * The operations which read the register, modify the value and then - * store the result back are vulnerable. - */ - -#define ERC32_Clear_interrupt( _source ) \ - do { \ - ERC32_MEC.Interrupt_Clear = (1 << (_source)); \ - } while (0) - -#define ERC32_Force_interrupt( _source ) \ - do { \ - unsigned32 _level; \ - \ - sparc_disable_interrupts( _level ); \ - ERC32_MEC.Test_Control = ERC32_MEC.Test_Control | 0x80000; \ - ERC32_MEC.Interrupt_Force = (1 << (_source)); \ - sparc_enable_interrupts( _level ); \ - } while (0) - -#define ERC32_Is_interrupt_pending( _source ) \ - (ERC32_MEC.Interrupt_Pending & (1 << (_source))) - -#define ERC32_Is_interrupt_masked( _source ) \ - (ERC32_MEC.Interrupt_Masked & (1 << (_source))) - -#define ERC32_Mask_interrupt( _source ) \ - do { \ - unsigned32 _level; \ - \ - sparc_disable_interrupts( _level ); \ - ERC32_MEC.Interrupt_Mask |= (1 << (_source)); \ - sparc_enable_interrupts( _level ); \ - } while (0) - -#define ERC32_Unmask_interrupt( _source ) \ - do { \ - unsigned32 _level; \ - \ - sparc_disable_interrupts( _level ); \ - ERC32_MEC.Interrupt_Mask &= ~(1 << (_source)); \ - sparc_enable_interrupts( _level ); \ - } while (0) - -#define ERC32_Disable_interrupt( _source, _previous ) \ - do { \ - unsigned32 _level; \ - unsigned32 _mask = 1 << (_source); \ - \ - sparc_disable_interrupts( _level ); \ - (_previous) = ERC32_MEC.Interrupt_Mask; \ - ERC32_MEC.Interrupt_Mask = _previous | _mask; \ - sparc_enable_interrupts( _level ); \ - (_previous) &= ~_mask; \ - } while (0) - -#define ERC32_Restore_interrupt( _source, _previous ) \ - do { \ - unsigned32 _level; \ - unsigned32 _mask = 1 << (_source); \ - \ - sparc_disable_interrupts( _level ); \ - ERC32_MEC.Interrupt_Mask = \ - (ERC32_MEC.Interrupt_Mask & ~_mask) | (_previous); \ - sparc_enable_interrupts( _level ); \ - } while (0) - -/* - * The following macros attempt to hide the fact that the General Purpose - * Timer and Real Time Clock Timer share the Timer Control Register. Because - * the Timer Control Register is write only, we must mirror it in software - * and insure that writes to one timer do not alter the current settings - * and status of the other timer. - * - * This code promotes the view that the two timers are completely independent. - * By exclusively using the routines below to access the Timer Control - * Register, the application can view the system as having a General Purpose - * Timer Control Register and a Real Time Clock Timer Control Register - * rather than the single shared value. - * - * Each logical timer control register is organized as follows: - * - * D0 - Counter Reload - * 1 = reload counter at zero and restart - * 0 = stop counter at zero - * - * D1 - Counter Load - * 1 = load counter with preset value and restart - * 0 = no function - * - * D2 - Enable - * 1 = enable counting - * 0 = hold scaler and counter - * - * D3 - Scaler Load - * 1 = load scalar with preset value and restart - * 0 = no function - * - * To insure the management of the mirror is atomic, we disable interrupts - * around updates. - */ - -#define ERC32_MEC_TIMER_COUNTER_RELOAD_AT_ZERO 0x00000001 -#define ERC32_MEC_TIMER_COUNTER_STOP_AT_ZERO 0x00000000 - -#define ERC32_MEC_TIMER_COUNTER_LOAD_COUNTER 0x00000002 - -#define ERC32_MEC_TIMER_COUNTER_ENABLE_COUNTING 0x00000004 -#define ERC32_MEC_TIMER_COUNTER_DISABLE_COUNTING 0x00000000 - -#define ERC32_MEC_TIMER_COUNTER_LOAD_SCALER 0x00000008 - -#define ERC32_MEC_TIMER_COUNTER_RELOAD_MASK 0x00000001 -#define ERC32_MEC_TIMER_COUNTER_ENABLE_MASK 0x00000004 - -#define ERC32_MEC_TIMER_COUNTER_DEFINED_MASK 0x0000000F -#define ERC32_MEC_TIMER_COUNTER_CURRENT_MODE_MASK 0x00000005 - -extern unsigned32 _ERC32_MEC_Timer_Control_Mirror; - -/* - * This macros manipulate the General Purpose Timer portion of the - * Timer Control register and promote the view that there are actually - * two independent Timer Control Registers. - */ - -#define ERC32_MEC_Set_General_Purpose_Timer_Control( _value ) \ - do { \ - unsigned32 _level; \ - unsigned32 _control; \ - unsigned32 __value; \ - \ - __value = ((_value) & 0x0f); \ - sparc_disable_interrupts( _level ); \ - _control = _ERC32_MEC_Timer_Control_Mirror; \ - _control &= ERC32_MEC_TIMER_COUNTER_DEFINED_MASK << 8; \ - _ERC32_MEC_Timer_Control_Mirror = _control | _value; \ - _control &= (ERC32_MEC_TIMER_COUNTER_CURRENT_MODE_MASK << 8); \ - _control |= __value; \ - /* printf( "GPT 0x%x 0x%x 0x%x\n", _value, __value, _control ); */ \ - ERC32_MEC.Timer_Control = _control; \ - sparc_enable_interrupts( _level ); \ - } while ( 0 ) - -#define ERC32_MEC_Get_General_Purpose_Timer_Control( _value ) \ - do { \ - (_value) = _ERC32_MEC_Timer_Control_Mirror & 0xf; \ - } while ( 0 ) - -/* - * This macros manipulate the Real Timer Clock Timer portion of the - * Timer Control register and promote the view that there are actually - * two independent Timer Control Registers. - */ - -#define ERC32_MEC_Set_Real_Time_Clock_Timer_Control( _value ) \ - do { \ - unsigned32 _level; \ - unsigned32 _control; \ - unsigned32 __value; \ - \ - __value = ((_value) & 0x0f) << 8; \ - sparc_disable_interrupts( _level ); \ - _control = _ERC32_MEC_Timer_Control_Mirror; \ - _control &= ERC32_MEC_TIMER_COUNTER_DEFINED_MASK; \ - _ERC32_MEC_Timer_Control_Mirror = _control | __value; \ - _control &= ERC32_MEC_TIMER_COUNTER_CURRENT_MODE_MASK; \ - _control |= __value; \ - /* printf( "RTC 0x%x 0x%x 0x%x\n", _value, __value, _control ); */ \ - ERC32_MEC.Timer_Control = _control; \ - sparc_enable_interrupts( _level ); \ - } while ( 0 ) - -#define ERC32_MEC_Get_Real_Time_Clock_Timer_Control( _value ) \ - do { \ - (_value) = (_ERC32_MEC_Timer_Control_Mirror >> 8) & 0xf; \ - } while ( 0 ) - - -#endif /* !ASM */ - -#ifdef __cplusplus -} -#endif - -#endif /* !_INCLUDE_ERC32_h */ -/* end of include file */ - diff --git a/c/src/exec/score/cpu/sparc/rtems.s b/c/src/exec/score/cpu/sparc/rtems.s deleted file mode 100644 index f20d8c8288..0000000000 --- a/c/src/exec/score/cpu/sparc/rtems.s +++ /dev/null @@ -1,58 +0,0 @@ -/* rtems.s - * - * This file contains the single entry point code for - * the SPARC port of RTEMS. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * Ported to ERC32 implementation of the SPARC by On-Line Applications - * Research Corporation (OAR) under contract to the European Space - * Agency (ESA). - * - * ERC32 modifications of respective RTEMS file: COPYRIGHT (c) 1995. - * European Space Agency. - * - * $Id$ - */ - -#include <asm.h> - -/* - * RTEMS - * - * This routine jumps to the directive indicated in the - * CPU defined register. This routine is used when RTEMS is - * linked by itself and placed in ROM. This routine is the - * first address in the ROM space for RTEMS. The user "calls" - * this address with the directive arguments in the normal place. - * This routine then jumps indirectly to the correct directive - * preserving the arguments. The directive should not realize - * it has been "wrapped" in this way. The table "_Entry_points" - * is used to look up the directive. - * - * void RTEMS() - */ - - .align 4 - PUBLIC(RTEMS) -SYM(RTEMS): - /* - * g2 was chosen because gcc uses it as a scratch register in - * similar code scenarios and the other locals, ins, and outs - * are off limits to this routine unless it does a "save" and - * copies its in registers to the outs which only works up until - * 6 parameters. Best to take the simple approach in this case. - */ - sethi SYM(_Entry_points), %g2 - or %g2, %lo(SYM(_Entry_points)), %g2 - sll %g1, 2, %g1 - add %g1, %g2, %g2 - jmp %g2 - nop - diff --git a/c/src/exec/score/cpu/sparc/sparc.h b/c/src/exec/score/cpu/sparc/sparc.h deleted file mode 100644 index 283548728a..0000000000 --- a/c/src/exec/score/cpu/sparc/sparc.h +++ /dev/null @@ -1,253 +0,0 @@ -/* sparc.h - * - * This include file contains information pertaining to the SPARC - * processor family. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * Ported to ERC32 implementation of the SPARC by On-Line Applications - * Research Corporation (OAR) under contract to the European Space - * Agency (ESA). - * - * ERC32 modifications of respective RTEMS file: COPYRIGHT (c) 1995. - * European Space Agency. - * - * $Id$ - */ - -#ifndef _INCLUDE_SPARC_h -#define _INCLUDE_SPARC_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This file contains the information required to build - * RTEMS for a particular member of the "sparc" family. It does - * this by setting variables to indicate which implementation - * dependent features are present in a particular member - * of the family. - * - * Currently recognized feature flags: - * - * + SPARC_HAS_FPU - * 0 - no HW FPU - * 1 - has HW FPU (assumed to be compatible w/90C602) - * - * + SPARC_HAS_BITSCAN - * 0 - does not have scan instructions - * 1 - has scan instruction (not currently implemented) - * - * + SPARC_NUMBER_OF_REGISTER_WINDOWS - * 8 is the most common number supported by SPARC implementations. - * SPARC_PSR_CWP_MASK is derived from this value. - * - * + SPARC_HAS_LOW_POWER_MODE - * 0 - does not have low power mode support (or not supported) - * 1 - has low power mode and thus a CPU model dependent idle task. - * - */ - -#if defined(erc32) - -#define CPU_MODEL_NAME "erc32" -#define SPARC_HAS_FPU 1 -#define SPARC_HAS_BITSCAN 0 -#define SPARC_NUMBER_OF_REGISTER_WINDOWS 8 -#define SPARC_HAS_LOW_POWER_MODE 1 - -#else - -#error "Unsupported CPU Model" - -#endif - -/* - * Define the name of the CPU family. - */ - -#define CPU_NAME "SPARC" - -/* - * Miscellaneous constants - */ - -/* - * PSR masks and starting bit positions - * - * NOTE: Reserved bits are ignored. - */ - -#if (SPARC_NUMBER_OF_REGISTER_WINDOWS == 8) -#define SPARC_PSR_CWP_MASK 0x07 /* bits 0 - 4 */ -#elif (SPARC_NUMBER_OF_REGISTER_WINDOWS == 16) -#define SPARC_PSR_CWP_MASK 0x0F /* bits 0 - 4 */ -#elif (SPARC_NUMBER_OF_REGISTER_WINDOWS == 32) -#define SPARC_PSR_CWP_MASK 0x1F /* bits 0 - 4 */ -#else -#error "Unsupported number of register windows for this cpu" -#endif - -#define SPARC_PSR_ET_MASK 0x00000020 /* bit 5 */ -#define SPARC_PSR_PS_MASK 0x00000040 /* bit 6 */ -#define SPARC_PSR_S_MASK 0x00000080 /* bit 7 */ -#define SPARC_PSR_PIL_MASK 0x00000F00 /* bits 8 - 11 */ -#define SPARC_PSR_EF_MASK 0x00001000 /* bit 12 */ -#define SPARC_PSR_EC_MASK 0x00002000 /* bit 13 */ -#define SPARC_PSR_ICC_MASK 0x00F00000 /* bits 20 - 23 */ -#define SPARC_PSR_VER_MASK 0x0F000000 /* bits 24 - 27 */ -#define SPARC_PSR_IMPL_MASK 0xF0000000 /* bits 28 - 31 */ - -#define SPARC_PSR_CWP_BIT_POSITION 0 /* bits 0 - 4 */ -#define SPARC_PSR_ET_BIT_POSITION 5 /* bit 5 */ -#define SPARC_PSR_PS_BIT_POSITION 6 /* bit 6 */ -#define SPARC_PSR_S_BIT_POSITION 7 /* bit 7 */ -#define SPARC_PSR_PIL_BIT_POSITION 8 /* bits 8 - 11 */ -#define SPARC_PSR_EF_BIT_POSITION 12 /* bit 12 */ -#define SPARC_PSR_EC_BIT_POSITION 13 /* bit 13 */ -#define SPARC_PSR_ICC_BIT_POSITION 20 /* bits 20 - 23 */ -#define SPARC_PSR_VER_BIT_POSITION 24 /* bits 24 - 27 */ -#define SPARC_PSR_IMPL_BIT_POSITION 28 /* bits 28 - 31 */ - -#ifndef ASM - -/* - * Standard nop - */ - -#define nop() \ - do { \ - asm volatile ( "nop" ); \ - } while ( 0 ) - -/* - * Get and set the PSR - */ - -#define sparc_get_psr( _psr ) \ - do { \ - (_psr) = 0; \ - asm volatile( "rd %%psr, %0" : "=r" (_psr) : "0" (_psr) ); \ - } while ( 0 ) - -#define sparc_set_psr( _psr ) \ - do { \ - asm volatile ( "mov %0, %%psr " : "=r" ((_psr)) : "0" ((_psr)) ); \ - nop(); \ - nop(); \ - nop(); \ - } while ( 0 ) - -/* - * Get and set the TBR - */ - -#define sparc_get_tbr( _tbr ) \ - do { \ - (_tbr) = 0; /* to avoid unitialized warnings */ \ - asm volatile( "rd %%tbr, %0" : "=r" (_tbr) : "0" (_tbr) ); \ - } while ( 0 ) - -#define sparc_set_tbr( _tbr ) \ - do { \ - asm volatile( "wr %0, 0, %%tbr" : "=r" (_tbr) : "0" (_tbr) ); \ - } while ( 0 ) - -/* - * Get and set the WIM - */ - -#define sparc_get_wim( _wim ) \ - do { \ - asm volatile( "rd %%wim, %0" : "=r" (_wim) : "0" (_wim) ); \ - } while ( 0 ) - -#define sparc_set_wim( _wim ) \ - do { \ - asm volatile( "wr %0, %%wim" : "=r" (_wim) : "0" (_wim) ); \ - nop(); \ - nop(); \ - nop(); \ - } while ( 0 ) - -/* - * Get and set the Y - */ - -#define sparc_get_y( _y ) \ - do { \ - asm volatile( "rd %%y, %0" : "=r" (_y) : "0" (_y) ); \ - } while ( 0 ) - -#define sparc_set_y( _y ) \ - do { \ - asm volatile( "wr %0, %%y" : "=r" (_y) : "0" (_y) ); \ - } while ( 0 ) - -/* - * Manipulate the interrupt level in the psr - * - */ - -#define sparc_disable_interrupts( _level ) \ - do { \ - register unsigned int _newlevel; \ - \ - sparc_get_psr( _level ); \ - (_newlevel) = (_level) | SPARC_PSR_PIL_MASK; \ - sparc_set_psr( _newlevel ); \ - } while ( 0 ) - -#define sparc_enable_interrupts( _level ) \ - do { \ - unsigned int _tmp; \ - \ - sparc_get_psr( _tmp ); \ - _tmp &= ~SPARC_PSR_PIL_MASK; \ - _tmp |= (_level) & SPARC_PSR_PIL_MASK; \ - sparc_set_psr( _tmp ); \ - } while ( 0 ) - -#define sparc_flash_interrupts( _level ) \ - do { \ - register unsigned32 _ignored = 0; \ - \ - sparc_enable_interrupts( (_level) ); \ - sparc_disable_interrupts( _ignored ); \ - } while ( 0 ) - -#define sparc_set_interrupt_level( _new_level ) \ - do { \ - register unsigned32 _new_psr_level = 0; \ - \ - sparc_get_psr( _new_psr_level ); \ - _new_psr_level &= ~SPARC_PSR_PIL_MASK; \ - _new_psr_level |= \ - (((_new_level) << SPARC_PSR_PIL_BIT_POSITION) & SPARC_PSR_PIL_MASK); \ - sparc_set_psr( _new_psr_level ); \ - } while ( 0 ) - -#define sparc_get_interrupt_level( _level ) \ - do { \ - register unsigned32 _psr_level = 0; \ - \ - sparc_get_psr( _psr_level ); \ - (_level) = \ - (_psr_level & SPARC_PSR_PIL_MASK) >> SPARC_PSR_PIL_BIT_POSITION; \ - } while ( 0 ) - -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* ! _INCLUDE_SPARC_h */ -/* end of include file */ diff --git a/c/src/exec/score/cpu/sparc/sparctypes.h b/c/src/exec/score/cpu/sparc/sparctypes.h deleted file mode 100644 index 7a7b2bb606..0000000000 --- a/c/src/exec/score/cpu/sparc/sparctypes.h +++ /dev/null @@ -1,64 +0,0 @@ -/* sparctypes.h - * - * This include file contains type definitions pertaining to the - * SPARC processor family. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * Ported to ERC32 implementation of the SPARC by On-Line Applications - * Research Corporation (OAR) under contract to the European Space - * Agency (ESA). - * - * ERC32 modifications of respective RTEMS file: COPYRIGHT (c) 1995. - * European Space Agency. - * - * $Id$ - */ - -#ifndef __SPARC_TYPES_h -#define __SPARC_TYPES_h - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This section defines the basic types for this processor. - */ - -typedef unsigned char unsigned8; /* unsigned 8-bit integer */ -typedef unsigned short unsigned16; /* unsigned 16-bit integer */ -typedef unsigned int unsigned32; /* unsigned 32-bit integer */ -typedef unsigned long long unsigned64; /* unsigned 64-bit integer */ - -typedef unsigned16 Priority_Bit_map_control; - -typedef signed char signed8; /* 8-bit signed integer */ -typedef signed short signed16; /* 16-bit signed integer */ -typedef signed int signed32; /* 32-bit signed integer */ -typedef signed long long signed64; /* 64 bit signed integer */ - -typedef unsigned32 boolean; /* Boolean value */ - -typedef float single_precision; /* single precision float */ -typedef double double_precision; /* double precision float */ - -typedef void sparc_isr; -typedef void ( *sparc_isr_entry )( void ); - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif -/* end of include file */ diff --git a/c/src/exec/score/cpu/unix/Makefile.in b/c/src/exec/score/cpu/unix/Makefile.in deleted file mode 100644 index 0589977f7f..0000000000 --- a/c/src/exec/score/cpu/unix/Makefile.in +++ /dev/null @@ -1,84 +0,0 @@ -# -# $Id$ -# - -@SET_MAKE@ -srcdir = @srcdir@ -VPATH = @srcdir@ -RTEMS_ROOT = @top_srcdir@ -PROJECT_ROOT = @PROJECT_ROOT@ - -RELS=$(ARCH)/rtems-cpu.rel - -# C source names, if any, go here -- minus the .c -C_PIECES=cpu -C_FILES=$(C_PIECES:%=%.c) -C_O_FILES=$(C_PIECES:%=${ARCH}/%.o) - -H_FILES=$(srcdir)/cpu.h $(srcdir)/unix.h $(srcdir)/unixtypes.h - -# Assembly source names, if any, go here -- minus the .S -S_PIECES= -S_FILES=$(S_PIECES:%=%.S) -S_O_FILES=$(S_FILES:%.S=${ARCH}/%.o) - -SRCS=$(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES) -OBJS=$(C_O_FILES) $(CC_O_FILES) $(S_O_FILES) - -include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg -include $(RTEMS_ROOT)/make/leaf.cfg - -# -# (OPTIONAL) Add local stuff here using += -# - -DEFINES += -CPPFLAGS += -CFLAGS += $(CFLAGS_OS_V) -DCPU_SYNC_IO $(LIBC_DEFINES) - -LD_PATHS += -LD_LIBS += -LDFLAGS += - -# -# Add your list of files to delete here. The config files -# already know how to delete some stuff, so you may want -# to just run 'make clean' first to see what gets missed. -# 'make clobber' already includes 'make clean' -# - -CLEAN_ADDITIONS += -CLOBBER_ADDITIONS += - -$(ARCH)/unixsize.h: $(ARCH) cpu.h $(PROJECT_RELEASE)/bin/gensize - $(RM) $@ - $(PROJECT_RELEASE)/bin/gensize > $@ - $(CHMOD) -w $@ - -$(ARCH)/rtems-cpu.rel: $(OBJS) - $(make-rel) - -all: ${ARCH} $(SRCS) $(ARCH)/unixsize.h preinstall $(RELS) - -# Install the program(s), appending _g or _p as appropriate. -# for include files, just use $(INSTALL) -install: all - -# Real ports using the gnu tools will need to have bsp_specs!!! -# ${PROJECT_RELEASE}/lib/bsp_specs -preinstall: $(ARCH) $(ARCH)/unixsize.h \ - $(PROJECT_INCLUDE)/rtems/score/targopts.h \ - $(PROJECT_RELEASE)/lib/bsp_specs - $(INSTALL) -m 444 ${H_FILES} $(PROJECT_INCLUDE)/rtems/score - $(INSTALL) -m 444 ${ARCH}/unixsize.h $(PROJECT_INCLUDE)/rtems/score - -$(PROJECT_INCLUDE)/rtems/score/targopts.h: $(ARCH)/targopts.h-tmp - $(INSTALL) -m 444 $(ARCH)/targopts.h-tmp $@ - -# $(ARCH)/targopts.h-tmp rule is in leaf.cfg - -# Real ports using the gnu tools will need to have bsp_specs!!! -${PROJECT_RELEASE}/lib/bsp_specs: $(ARCH)/bsp_specs.tmp - $(INSTALL) -m 444 $(ARCH)/bsp_specs.tmp $@ -# -# $(ARCH)/bsp_specs.tmp rule is in leaf.cfg diff --git a/c/src/exec/score/cpu/unix/cpu.c b/c/src/exec/score/cpu/unix/cpu.c deleted file mode 100644 index 3b3dbcd383..0000000000 --- a/c/src/exec/score/cpu/unix/cpu.c +++ /dev/null @@ -1,1117 +0,0 @@ -/* - * UNIX Simulator Dependent Source - * - * COPYRIGHT (c) 1994,95 by Division Incorporated - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#include <rtems/system.h> -#include <rtems/score/isr.h> -#include <rtems/score/interr.h> - -#if defined(__linux__) -#define _XOPEN_SOURCE -#define MALLOC_0_RETURNS_NULL -#endif - -#include <sys/types.h> -#include <sys/times.h> -#include <stdio.h> -#include <stdlib.h> -#include <setjmp.h> -#include <signal.h> -#include <time.h> -#include <sys/time.h> -#include <errno.h> -#include <unistd.h> -#include <sys/ipc.h> -#include <sys/shm.h> -#include <sys/sem.h> -#include <string.h> /* memset */ - -#ifndef SA_RESTART -#define SA_RESTART 0 -#endif - -typedef struct { - jmp_buf regs; - int isr_level; -} Context_Control_overlay; - -void _CPU_Signal_initialize(void); -void _CPU_Stray_signal(int); -void _CPU_ISR_Handler(int); - -static sigset_t _CPU_Signal_mask; -static Context_Control_overlay - _CPU_Context_Default_with_ISRs_enabled CPU_STRUCTURE_ALIGNMENT; -static Context_Control_overlay - _CPU_Context_Default_with_ISRs_disabled CPU_STRUCTURE_ALIGNMENT; - -/* - * Sync IO support, an entry for each fd that can be set - */ - -void _CPU_Sync_io_Init(); - -static rtems_sync_io_handler _CPU_Sync_io_handlers[FD_SETSIZE]; -static int sync_io_nfds; -static fd_set sync_io_readfds; -static fd_set sync_io_writefds; -static fd_set sync_io_exceptfds; - -/* - * Which cpu are we? Used by libcpu and libbsp. - */ - -int cpu_number; - -/*PAGE - * - * _CPU_ISR_From_CPU_Init - */ - -sigset_t posix_empty_mask; - -void _CPU_ISR_From_CPU_Init() -{ - unsigned32 i; - proc_ptr old_handler; - - /* - * Generate an empty mask to be used by disable_support - */ - - sigemptyset(&posix_empty_mask); - - /* - * Block all the signals except SIGTRAP for the debugger - * and fatal error signals. - */ - - (void) sigfillset(&_CPU_Signal_mask); - (void) sigdelset(&_CPU_Signal_mask, SIGTRAP); - (void) sigdelset(&_CPU_Signal_mask, SIGABRT); - (void) sigdelset(&_CPU_Signal_mask, SIGIOT); - (void) sigdelset(&_CPU_Signal_mask, SIGCONT); - (void) sigdelset(&_CPU_Signal_mask, SIGSEGV); - (void) sigdelset(&_CPU_Signal_mask, SIGBUS); - (void) sigdelset(&_CPU_Signal_mask, SIGFPE); - - _CPU_ISR_Enable(1); - - /* - * Set the handler for all signals to be signal_handler - * which will then vector out to the correct handler - * for whichever signal actually happened. Initially - * set the vectors to the stray signal handler. - */ - - for (i = 0; i < CPU_INTERRUPT_NUMBER_OF_VECTORS; i++) - (void)_CPU_ISR_install_vector(i, _CPU_Stray_signal, &old_handler); - - _CPU_Signal_initialize(); -} - -void _CPU_Signal_initialize( void ) -{ - struct sigaction act; - sigset_t mask; - - /* mark them all active except for TraceTrap and Abort */ - - mask = _CPU_Signal_mask; - sigprocmask(SIG_UNBLOCK, &mask, 0); - - act.sa_handler = _CPU_ISR_Handler; - act.sa_mask = mask; - act.sa_flags = SA_RESTART; - - sigaction(SIGHUP, &act, 0); - sigaction(SIGINT, &act, 0); - sigaction(SIGQUIT, &act, 0); - sigaction(SIGILL, &act, 0); -#ifdef SIGEMT - sigaction(SIGEMT, &act, 0); -#endif - sigaction(SIGFPE, &act, 0); - sigaction(SIGKILL, &act, 0); - sigaction(SIGBUS, &act, 0); - sigaction(SIGSEGV, &act, 0); -#ifdef SIGSYS - sigaction(SIGSYS, &act, 0); -#endif - sigaction(SIGPIPE, &act, 0); - sigaction(SIGALRM, &act, 0); - sigaction(SIGTERM, &act, 0); - sigaction(SIGUSR1, &act, 0); - sigaction(SIGUSR2, &act, 0); - sigaction(SIGCHLD, &act, 0); -#ifdef SIGCLD - sigaction(SIGCLD, &act, 0); -#endif -#ifdef SIGPWR - sigaction(SIGPWR, &act, 0); -#endif - sigaction(SIGVTALRM, &act, 0); - sigaction(SIGPROF, &act, 0); - sigaction(SIGIO, &act, 0); - sigaction(SIGWINCH, &act, 0); - sigaction(SIGSTOP, &act, 0); - sigaction(SIGTTIN, &act, 0); - sigaction(SIGTTOU, &act, 0); - sigaction(SIGURG, &act, 0); -#ifdef SIGLOST - sigaction(SIGLOST, &act, 0); -#endif -} - -/*PAGE - * - * _CPU_Context_From_CPU_Init - */ - -void _CPU_Context_From_CPU_Init() -{ - -#if defined(__hppa__) && defined(RTEMS_UNIXLIB_SETJMP) - /* - * HACK - set the _SYSTEM_ID to 0x20c so that setjmp/longjmp - * will handle the full 32 floating point registers. - */ - - { - extern unsigned32 _SYSTEM_ID; - - _SYSTEM_ID = 0x20c; - } -#endif - - /* - * get default values to use in _CPU_Context_Initialize() - */ - - - (void) memset( - &_CPU_Context_Default_with_ISRs_enabled, - 0, - sizeof(Context_Control) - ); - (void) memset( - &_CPU_Context_Default_with_ISRs_disabled, - 0, - sizeof(Context_Control) - ); - - _CPU_ISR_Set_level( 0 ); - _CPU_Context_switch( - (Context_Control *) &_CPU_Context_Default_with_ISRs_enabled, - (Context_Control *) &_CPU_Context_Default_with_ISRs_enabled - ); - - _CPU_ISR_Set_level( 1 ); - _CPU_Context_switch( - (Context_Control *) &_CPU_Context_Default_with_ISRs_disabled, - (Context_Control *) &_CPU_Context_Default_with_ISRs_disabled - ); -} - -/*PAGE - * - * _CPU_Sync_io_Init - */ - -void _CPU_Sync_io_Init() -{ - int fd; - - for (fd = 0; fd < FD_SETSIZE; fd++) - _CPU_Sync_io_handlers[fd] = NULL; - - sync_io_nfds = 0; - FD_ZERO(&sync_io_readfds); - FD_ZERO(&sync_io_writefds); - FD_ZERO(&sync_io_exceptfds); -} - -/*PAGE - * - * _CPU_ISR_Get_level - */ - -unsigned32 _CPU_ISR_Get_level( void ) -{ - sigset_t old_mask; - -#if defined(__linux__) - sigemptyset( &old_mask ); -#endif - sigprocmask(SIG_BLOCK, 0, &old_mask); - - if (memcmp((void *)&posix_empty_mask, (void *)&old_mask, sizeof(sigset_t))) - return 1; - - return 0; -} - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: - * cpu_table - CPU table to initialize - * thread_dispatch - address of disptaching routine - */ - - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) /* ignored on this CPU */ -) -{ - /* - * The thread_dispatch argument is the address of the entry point - * for the routine called at the end of an ISR once it has been - * decided a context switch is necessary. On some compilation - * systems it is difficult to call a high-level language routine - * from assembly. This allows us to trick these systems. - * - * If you encounter this problem save the entry point in a CPU - * dependent variable. - */ - - _CPU_Thread_dispatch_pointer = thread_dispatch; - - /* - * XXX; If there is not an easy way to initialize the FP context - * during Context_Initialize, then it is usually easier to - * save an "uninitialized" FP context here and copy it to - * the task's during Context_Initialize. - */ - - /* XXX: FP context initialization support */ - - _CPU_Table = *cpu_table; - - _CPU_ISR_From_CPU_Init(); - - _CPU_Sync_io_Init(); - - _CPU_Context_From_CPU_Init(); - -} - -/*PAGE - * - * _CPU_ISR_install_raw_handler - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - _CPU_Fatal_halt( 0xdeaddead ); -} - -/*PAGE - * - * _CPU_ISR_install_vector - * - * This kernel routine installs the RTEMS handler for the - * specified vector. - * - * Input parameters: - * vector - interrupt vector number - * old_handler - former ISR for this vector number - * new_handler - replacement ISR for this vector number - * - * Output parameters: NONE - * - */ - - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - *old_handler = _ISR_Vector_table[ vector ]; - - /* - * If the interrupt vector table is a table of pointer to isr entry - * points, then we need to install the appropriate RTEMS interrupt - * handler for this vector number. - */ - - /* - * We put the actual user ISR address in '_ISR_vector_table'. This will - * be used by the _CPU_ISR_Handler so the user gets control. - */ - - _ISR_Vector_table[ vector ] = new_handler; -} - -/*PAGE - * - * _CPU_Install_interrupt_stack - */ - -void _CPU_Install_interrupt_stack( void ) -{ -} - -/*PAGE - * - * _CPU_Thread_Idle_body - * - * Stop until we get a signal which is the logically the same thing - * entering low-power or sleep mode on a real processor and waiting for - * an interrupt. This significantly reduces the consumption of host - * CPU cycles which is again similar to low power mode. - */ - -void _CPU_Thread_Idle_body( void ) -{ -#if CPU_SYNC_IO - extern void _Thread_Dispatch(void); - int fd; -#endif - - while (1) { -#ifdef RTEMS_DEBUG - /* interrupts had better be enabled at this point! */ - if (_CPU_ISR_Get_level() != 0) - abort(); -#endif - - /* - * Block on a select statement, the CPU interface added allow the - * user to add new descriptors which are to be blocked on - */ - -#if CPU_SYNC_IO - if (sync_io_nfds) { - int result; - fd_set readfds, writefds, exceptfds; - - readfds = sync_io_readfds; - writefds = sync_io_writefds; - exceptfds = sync_io_exceptfds; - result = select(sync_io_nfds, - &readfds, - &writefds, - &exceptfds, - NULL); - - if (result < 0) { - if (errno != EINTR) - _CPU_Fatal_error(0x200); /* FIXME : what number should go here !! */ - _Thread_Dispatch(); - continue; - } - - for (fd = 0; fd < sync_io_nfds; fd++) { - boolean read = FD_ISSET(fd, &readfds); - boolean write = FD_ISSET(fd, &writefds); - boolean except = FD_ISSET(fd, &exceptfds); - - if (_CPU_Sync_io_handlers[fd] && (read || write || except)) - _CPU_Sync_io_handlers[fd](fd, read, write, except); - } - - _Thread_Dispatch(); - } else - pause(); -#else - pause(); -#endif - - } - -} - -/*PAGE - * - * _CPU_Context_Initialize - */ - -void _CPU_Context_Initialize( - Context_Control *_the_context, - unsigned32 *_stack_base, - unsigned32 _size, - unsigned32 _new_level, - void *_entry_point, - boolean _is_fp -) -{ - unsigned32 *addr; - unsigned32 jmp_addr; - unsigned32 _stack_low; /* lowest "stack aligned" address */ - unsigned32 _stack_high; /* highest "stack aligned" address */ - unsigned32 _the_size; - - jmp_addr = (unsigned32) _entry_point; - - /* - * On CPUs with stacks which grow down, we build the stack - * based on the _stack_high address. On CPUs with stacks which - * grow up, we build the stack based on the _stack_low address. - */ - - _stack_low = (unsigned32)(_stack_base) + CPU_STACK_ALIGNMENT - 1; - _stack_low &= ~(CPU_STACK_ALIGNMENT - 1); - - _stack_high = (unsigned32)(_stack_base) + _size; - _stack_high &= ~(CPU_STACK_ALIGNMENT - 1); - - if (_stack_high > _stack_low) - _the_size = _stack_high - _stack_low; - else - _the_size = _stack_low - _stack_high; - - /* - * Slam our jmp_buf template into the context we are creating - */ - - if ( _new_level == 0 ) - *_the_context = *(Context_Control *) - &_CPU_Context_Default_with_ISRs_enabled; - else - *_the_context = *(Context_Control *) - &_CPU_Context_Default_with_ISRs_disabled; - - addr = (unsigned32 *)_the_context; - -#if defined(__hppa__) - *(addr + RP_OFF) = jmp_addr; - *(addr + SP_OFF) = (unsigned32)(_stack_low + CPU_FRAME_SIZE); - - /* - * See if we are using shared libraries by checking - * bit 30 in 24 off of newp. If bit 30 is set then - * we are using shared libraries and the jump address - * points to the pointer, so we put that into rp instead. - */ - - if (jmp_addr & 0x40000000) { - jmp_addr &= 0xfffffffc; - *(addr + RP_OFF) = *(unsigned32 *)jmp_addr; - } -#elif defined(__sparc__) - - /* - * See /usr/include/sys/stack.h in Solaris 2.3 for a nice - * diagram of the stack. - */ - - asm ("ta 0x03"); /* flush registers */ - - *(addr + RP_OFF) = jmp_addr + ADDR_ADJ_OFFSET; - *(addr + SP_OFF) = (unsigned32)(_stack_high - CPU_FRAME_SIZE); - *(addr + FP_OFF) = (unsigned32)(_stack_high); - -#elif defined(__i386__) - - /* - * This information was gathered by disassembling setjmp(). - */ - - { - unsigned32 stack_ptr; - - stack_ptr = _stack_high - CPU_FRAME_SIZE; - - *(addr + EBX_OFF) = 0xFEEDFEED; - *(addr + ESI_OFF) = 0xDEADDEAD; - *(addr + EDI_OFF) = 0xDEAFDEAF; - *(addr + EBP_OFF) = stack_ptr; - *(addr + ESP_OFF) = stack_ptr; - *(addr + RET_OFF) = jmp_addr; - - addr = (unsigned32 *) stack_ptr; - - addr[ 0 ] = jmp_addr; - addr[ 1 ] = (unsigned32) stack_ptr; - addr[ 2 ] = (unsigned32) stack_ptr; - } - -#else -#error "UNKNOWN CPU!!!" -#endif - -} - -/*PAGE - * - * _CPU_Context_restore - */ - -void _CPU_Context_restore( - Context_Control *next -) -{ - Context_Control_overlay *nextp = (Context_Control_overlay *)next; - - _CPU_ISR_Enable(nextp->isr_level); - longjmp( nextp->regs, 0 ); -} - -/*PAGE - * - * _CPU_Context_switch - */ - -static void do_jump( - Context_Control_overlay *currentp, - Context_Control_overlay *nextp -); - -void _CPU_Context_switch( - Context_Control *current, - Context_Control *next -) -{ - Context_Control_overlay *currentp = (Context_Control_overlay *)current; - Context_Control_overlay *nextp = (Context_Control_overlay *)next; -#if 0 - int status; -#endif - - currentp->isr_level = _CPU_ISR_Disable_support(); - - do_jump( currentp, nextp ); - -#if 0 - if (sigsetjmp(currentp->regs, 1) == 0) { /* Save the current context */ - siglongjmp(nextp->regs, 0); /* Switch to the new context */ - _Internal_error_Occurred( - INTERNAL_ERROR_CORE, - TRUE, - status - ); - } -#endif - -#ifdef RTEMS_DEBUG - if (_CPU_ISR_Get_level() == 0) - abort(); -#endif - - _CPU_ISR_Enable(currentp->isr_level); -} - -static void do_jump( - Context_Control_overlay *currentp, - Context_Control_overlay *nextp -) -{ - int status; - - if (setjmp(currentp->regs) == 0) { /* Save the current context */ - longjmp(nextp->regs, 0); /* Switch to the new context */ - _Internal_error_Occurred( - INTERNAL_ERROR_CORE, - TRUE, - status - ); - } -} - -/*PAGE - * - * _CPU_Save_float_context - */ - -void _CPU_Save_float_context( - Context_Control_fp *fp_context -) -{ -} - -/*PAGE - * - * _CPU_Restore_float_context - */ - -void _CPU_Restore_float_context( - Context_Control_fp *fp_context -) -{ -} - -/*PAGE - * - * _CPU_ISR_Disable_support - */ - -unsigned32 _CPU_ISR_Disable_support(void) -{ - int status; - sigset_t old_mask; - - status = sigprocmask(SIG_BLOCK, &_CPU_Signal_mask, &old_mask); - if ( status ) - _Internal_error_Occurred( - INTERNAL_ERROR_CORE, - TRUE, - status - ); - - if (memcmp((void *)&posix_empty_mask, (void *)&old_mask, sizeof(sigset_t))) - return 1; - - return 0; -} - -/*PAGE - * - * _CPU_ISR_Enable - */ - -void _CPU_ISR_Enable( - unsigned32 level -) -{ - int status; - - if (level == 0) - status = sigprocmask(SIG_UNBLOCK, &_CPU_Signal_mask, 0); - else - status = sigprocmask(SIG_BLOCK, &_CPU_Signal_mask, 0); - - if ( status ) - _Internal_error_Occurred( - INTERNAL_ERROR_CORE, - TRUE, - status - ); -} - -/*PAGE - * - * _CPU_ISR_Handler - * - * External interrupt handler. - * This is installed as a UNIX signal handler. - * It vectors out to specific user interrupt handlers. - */ - -void _CPU_ISR_Handler(int vector) -{ - extern void _Thread_Dispatch(void); - extern unsigned32 _Thread_Dispatch_disable_level; - extern boolean _Context_Switch_necessary; - - if (_ISR_Nest_level++ == 0) { - /* switch to interrupt stack */ - } - - _Thread_Dispatch_disable_level++; - - if (_ISR_Vector_table[vector]) { - _ISR_Vector_table[vector](vector); - } else { - _CPU_Stray_signal(vector); - } - - if (_ISR_Nest_level-- == 0) { - /* switch back to original stack */ - } - - _Thread_Dispatch_disable_level--; - - if (_Thread_Dispatch_disable_level == 0 && - (_Context_Switch_necessary || _ISR_Signals_to_thread_executing)) { - _ISR_Signals_to_thread_executing = FALSE; - _CPU_ISR_Enable(0); - _Thread_Dispatch(); - } -} - -/*PAGE - * - * _CPU_Stray_signal - */ - -void _CPU_Stray_signal(int sig_num) -{ - char buffer[ 4 ]; - - /* - * print "stray" msg about ones which that might mean something - * Avoid using the stdio section of the library. - * The following is generally safe. - */ - - switch (sig_num) - { -#ifdef SIGCLD - case SIGCLD: - break; -#endif - default: - { - /* - * We avoid using the stdio section of the library. - * The following is generally safe - */ - - int digit; - int number = sig_num; - int len = 0; - - digit = number / 100; - number %= 100; - if (digit) buffer[len++] = '0' + digit; - - digit = number / 10; - number %= 10; - if (digit || len) buffer[len++] = '0' + digit; - - digit = number; - buffer[len++] = '0' + digit; - - buffer[ len++ ] = '\n'; - - write( 2, "Stray signal ", 13 ); - write( 2, buffer, len ); - - } - } - - /* - * If it was a "fatal" signal, then exit here - * If app code has installed a hander for one of these, then - * we won't call _CPU_Stray_signal, so this is ok. - */ - - switch (sig_num) { - case SIGINT: - case SIGHUP: - case SIGQUIT: - case SIGILL: -#ifdef SIGEMT - case SIGEMT: -#endif - case SIGKILL: - case SIGBUS: - case SIGSEGV: - case SIGTERM: - case SIGIOT: - _CPU_Fatal_error(0x100 + sig_num); - } -} - -/*PAGE - * - * _CPU_Fatal_error - */ - -void _CPU_Fatal_error(unsigned32 error) -{ - setitimer(ITIMER_REAL, 0, 0); - - if ( error ) { -#ifdef RTEMS_DEBUG - abort(); -#endif - if (getenv("RTEMS_DEBUG")) - abort(); - } - - _exit(error); -} - -/* - * Special Purpose Routines to hide the use of UNIX system calls. - */ - -int _CPU_Set_sync_io_handler( - int fd, - boolean read, - boolean write, - boolean except, - rtems_sync_io_handler handler -) -{ - if ((fd < FD_SETSIZE) && (_CPU_Sync_io_handlers[fd] == NULL)) { - if (read) - FD_SET(fd, &sync_io_readfds); - else - FD_CLR(fd, &sync_io_readfds); - if (write) - FD_SET(fd, &sync_io_writefds); - else - FD_CLR(fd, &sync_io_writefds); - if (except) - FD_SET(fd, &sync_io_exceptfds); - else - FD_CLR(fd, &sync_io_exceptfds); - _CPU_Sync_io_handlers[fd] = handler; - if ((fd + 1) > sync_io_nfds) - sync_io_nfds = fd + 1; - return 0; - } - return -1; -} - -int _CPU_Clear_sync_io_handler( - int fd -) -{ - if ((fd < FD_SETSIZE) && _CPU_Sync_io_handlers[fd]) { - FD_CLR(fd, &sync_io_readfds); - FD_CLR(fd, &sync_io_writefds); - FD_CLR(fd, &sync_io_exceptfds); - _CPU_Sync_io_handlers[fd] = NULL; - sync_io_nfds = 0; - for (fd = 0; fd < FD_SETSIZE; fd++) - if (FD_ISSET(fd, &sync_io_readfds) || - FD_ISSET(fd, &sync_io_writefds) || - FD_ISSET(fd, &sync_io_exceptfds)) - sync_io_nfds = fd + 1; - return 0; - } - return -1; -} - -int _CPU_Get_clock_vector( void ) -{ - return SIGALRM; -} - -void _CPU_Start_clock( - int microseconds -) -{ - struct itimerval new; - - new.it_value.tv_sec = 0; - new.it_value.tv_usec = microseconds; - new.it_interval.tv_sec = 0; - new.it_interval.tv_usec = microseconds; - - setitimer(ITIMER_REAL, &new, 0); -} - -void _CPU_Stop_clock( void ) -{ - struct itimerval new; - struct sigaction act; - - /* - * Set the SIGALRM signal to ignore any last - * signals that might come in while we are - * disarming the timer and removing the interrupt - * vector. - */ - - (void) memset(&act, 0, sizeof(act)); - act.sa_handler = SIG_IGN; - - sigaction(SIGALRM, &act, 0); - - (void) memset(&new, 0, sizeof(new)); - setitimer(ITIMER_REAL, &new, 0); -} - -int _CPU_SHM_Semid; -extern void fix_syscall_errno( void ); - -void _CPU_SHM_Init( - unsigned32 maximum_nodes, - boolean is_master_node, - void **shm_address, - unsigned32 *shm_length -) -{ - int i; - int shmid; - char *shm_addr; - key_t shm_key; - key_t sem_key; - int status = 0; /* to avoid unitialized warnings */ - int shm_size; - - if (getenv("RTEMS_SHM_KEY")) - shm_key = strtol(getenv("RTEMS_SHM_KEY"), 0, 0); - else -#ifdef RTEMS_SHM_KEY - shm_key = RTEMS_SHM_KEY; -#else - shm_key = 0xa000; -#endif - - if (getenv("RTEMS_SHM_SIZE")) - shm_size = strtol(getenv("RTEMS_SHM_SIZE"), 0, 0); - else -#ifdef RTEMS_SHM_SIZE - shm_size = RTEMS_SHM_SIZE; -#else - shm_size = 64 * 1024; -#endif - - if (getenv("RTEMS_SHM_SEMAPHORE_KEY")) - sem_key = strtol(getenv("RTEMS_SHM_SEMAPHORE_KEY"), 0, 0); - else -#ifdef RTEMS_SHM_SEMAPHORE_KEY - sem_key = RTEMS_SHM_SEMAPHORE_KEY; -#else - sem_key = 0xa001; -#endif - - shmid = shmget(shm_key, shm_size, IPC_CREAT | 0660); - if ( shmid == -1 ) { - fix_syscall_errno(); /* in case of newlib */ - perror( "shmget" ); - _CPU_Fatal_halt( 0xdead0001 ); - } - - shm_addr = shmat(shmid, (char *)0, SHM_RND); - if ( shm_addr == (void *)-1 ) { - fix_syscall_errno(); /* in case of newlib */ - perror( "shmat" ); - _CPU_Fatal_halt( 0xdead0002 ); - } - - _CPU_SHM_Semid = semget(sem_key, maximum_nodes + 1, IPC_CREAT | 0660); - if ( _CPU_SHM_Semid == -1 ) { - fix_syscall_errno(); /* in case of newlib */ - perror( "semget" ); - _CPU_Fatal_halt( 0xdead0003 ); - } - - if ( is_master_node ) { - for ( i=0 ; i <= maximum_nodes ; i++ ) { -#if defined(solaris2) - union semun { - int val; - struct semid_ds *buf; - ushort *array; - } help; - - help.val = 1; - status = semctl( _CPU_SHM_Semid, i, SETVAL, help ); -#elif defined(__linux__) || defined(__FreeBSD__) - union semun help; - - help.val = 1; - status = semctl( _CPU_SHM_Semid, i, SETVAL, help ); -#elif defined(hpux) - status = semctl( _CPU_SHM_Semid, i, SETVAL, 1 ); -#else -#error "Not a supported unix variant" -#endif - - fix_syscall_errno(); /* in case of newlib */ - if ( status == -1 ) { - _CPU_Fatal_halt( 0xdead0004 ); - } - } - } - - *shm_address = shm_addr; - *shm_length = shm_size; - -} - -int _CPU_Get_pid( void ) -{ - return getpid(); -} - -/* - * Define this to use signals for MPCI shared memory driver. - * If undefined, the shared memory driver will poll from the - * clock interrupt. - * Ref: ../shmsupp/getcfg.c - * - * BEWARE:: many UN*X kernels and debuggers become severely confused when - * debugging programs which use signals. The problem is *much* - * worse when using multiple signals, since ptrace(2) tends to - * drop all signals except 1 in the case of multiples. - * On hpux9, this problem was so bad, we couldn't use interrupts - * with the shared memory driver if we ever hoped to debug - * RTEMS programs. - * Maybe systems that use /proc don't have this problem... - */ - - -int _CPU_SHM_Get_vector( void ) -{ -#ifdef CPU_USE_SHM_INTERRUPTS - return SIGUSR1; -#else - return 0; -#endif -} - -void _CPU_SHM_Send_interrupt( - int pid, - int vector -) -{ - kill((pid_t) pid, vector); -} - -void _CPU_SHM_Lock( - int semaphore -) -{ - struct sembuf sb; - - sb.sem_num = semaphore; - sb.sem_op = -1; - sb.sem_flg = 0; - - while (1) { - int status = -1; - - status = semop(_CPU_SHM_Semid, &sb, 1); - if ( status >= 0 ) - break; - if ( status == -1 ) { - fix_syscall_errno(); /* in case of newlib */ - if (errno == EINTR) - continue; - perror("shm lock"); - _CPU_Fatal_halt( 0xdead0005 ); - } - } - -} - -void _CPU_SHM_Unlock( - int semaphore -) -{ - struct sembuf sb; - int status; - - sb.sem_num = semaphore; - sb.sem_op = 1; - sb.sem_flg = 0; - - while (1) { - status = semop(_CPU_SHM_Semid, &sb, 1); - if ( status >= 0 ) - break; - - if ( status == -1 ) { - fix_syscall_errno(); /* in case of newlib */ - if (errno == EINTR) - continue; - perror("shm unlock"); - _CPU_Fatal_halt( 0xdead0006 ); - } - } - -} diff --git a/c/src/exec/score/cpu/unix/cpu.h b/c/src/exec/score/cpu/unix/cpu.h deleted file mode 100644 index 227a631139..0000000000 --- a/c/src/exec/score/cpu/unix/cpu.h +++ /dev/null @@ -1,1081 +0,0 @@ -/* cpu.h - * - * This include file contains information pertaining to the HP - * PA-RISC processor (Level 1.1). - * - * COPYRIGHT (c) 1994 by Division Incorporated - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __CPU_h -#define __CPU_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems/score/unix.h> /* pick up machine definitions */ -#ifndef ASM -#include <rtems/score/unixtypes.h> -#endif - -#include <rtems/score/unixsize.h> - -#if defined(solaris2) -#undef _POSIX_C_SOURCE -#define _POSIX_C_SOURCE 3 -#undef __STRICT_ANSI__ -#define __STRICT_ANSI__ -#endif - -#if defined(linux) -#define MALLOC_0_RETURNS_NULL -#endif - -/* conditional compilation parameters */ - -/* - * Should the calls to _Thread_Enable_dispatch be inlined? - * - * If TRUE, then they are inlined. - * If FALSE, then a subroutine call is made. - * - * Basically this is an example of the classic trade-off of size - * versus speed. Inlining the call (TRUE) typically increases the - * size of RTEMS while speeding up the enabling of dispatching. - * [NOTE: In general, the _Thread_Dispatch_disable_level will - * only be 0 or 1 unless you are in an interrupt handler and that - * interrupt handler invokes the executive.] When not inlined - * something calls _Thread_Enable_dispatch which in turns calls - * _Thread_Dispatch. If the enable dispatch is inlined, then - * one subroutine call is avoided entirely.] - */ - -#define CPU_INLINE_ENABLE_DISPATCH FALSE - -/* - * Should the body of the search loops in _Thread_queue_Enqueue_priority - * be unrolled one time? In unrolled each iteration of the loop examines - * two "nodes" on the chain being searched. Otherwise, only one node - * is examined per iteration. - * - * If TRUE, then the loops are unrolled. - * If FALSE, then the loops are not unrolled. - * - * The primary factor in making this decision is the cost of disabling - * and enabling interrupts (_ISR_Flash) versus the cost of rest of the - * body of the loop. On some CPUs, the flash is more expensive than - * one iteration of the loop body. In this case, it might be desirable - * to unroll the loop. It is important to note that on some CPUs, this - * code is the longest interrupt disable period in RTEMS. So it is - * necessary to strike a balance when setting this parameter. - */ - -#define CPU_UNROLL_ENQUEUE_PRIORITY TRUE - -/* - * Does RTEMS manage a dedicated interrupt stack in software? - * - * If TRUE, then a stack is allocated in _Interrupt_Manager_initialization. - * If FALSE, nothing is done. - * - * If the CPU supports a dedicated interrupt stack in hardware, - * then it is generally the responsibility of the BSP to allocate it - * and set it up. - * - * If the CPU does not support a dedicated interrupt stack, then - * the porter has two options: (1) execute interrupts on the - * stack of the interrupted task, and (2) have RTEMS manage a dedicated - * interrupt stack. - * - * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - */ - -#define CPU_HAS_SOFTWARE_INTERRUPT_STACK FALSE - -/* - * Does this CPU have hardware support for a dedicated interrupt stack? - * - * If TRUE, then it must be installed during initialization. - * If FALSE, then no installation is performed. - * - * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. - * - * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. - */ - -#define CPU_HAS_HARDWARE_INTERRUPT_STACK TRUE - -/* - * Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager? - * - * If TRUE, then the memory is allocated during initialization. - * If FALSE, then the memory is allocated during initialization. - * - * This should be TRUE if CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE - * or CPU_INSTALL_HARDWARE_INTERRUPT_STACK is TRUE. - */ - -#define CPU_ALLOCATE_INTERRUPT_STACK FALSE - -/* - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? - */ - -#define CPU_ISR_PASSES_FRAME_POINTER 0 - -/* - * Does the CPU have hardware floating point? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored. - * - * If there is a FP coprocessor such as the i387 or mc68881, then - * the answer is TRUE. - * - * The macro name "NO_CPU_HAS_FPU" should be made CPU specific. - * It indicates whether or not this CPU model has FP support. For - * example, it would be possible to have an i386_nofp CPU model - * which set this to false to indicate that you have an i386 without - * an i387 and wish to leave floating point support out of RTEMS. - */ - -#define CPU_HARDWARE_FP TRUE - -/* - * Are all tasks RTEMS_FLOATING_POINT tasks implicitly? - * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed. - * - * So far, the only CPU in which this option has been used is the - * HP PA-RISC. The HP C compiler and gcc both implicitly use the - * floating point registers to perform integer multiplies. If - * a function which you would not think utilize the FP unit DOES, - * then one can not easily predict which tasks will use the FP hardware. - * In this case, this option should be TRUE. - * - * If CPU_HARDWARE_FP is FALSE, then this should be FALSE as well. - */ - -#define CPU_ALL_TASKS_ARE_FP FALSE - -/* - * Should the IDLE task have a floating point context? - * - * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task - * and it has a floating point context which is switched in and out. - * If FALSE, then the IDLE task does not have a floating point context. - * - * Setting this to TRUE negatively impacts the time required to preempt - * the IDLE task from an interrupt because the floating point context - * must be saved as part of the preemption. - */ - -#define CPU_IDLE_TASK_IS_FP FALSE - -/* - * Should the saving of the floating point registers be deferred - * until a context switch is made to another different floating point - * task? - * - * If TRUE, then the floating point context will not be stored until - * necessary. It will remain in the floating point registers and not - * disturned until another floating point task is switched to. - * - * If FALSE, then the floating point context is saved when a floating - * point task is switched out and restored when the next floating point - * task is restored. The state of the floating point registers between - * those two operations is not specified. - * - * If the floating point context does NOT have to be saved as part of - * interrupt dispatching, then it should be safe to set this to TRUE. - * - * Setting this flag to TRUE results in using a different algorithm - * for deciding when to save and restore the floating point context. - * The deferred FP switch algorithm minimizes the number of times - * the FP context is saved and restored. The FP context is not saved - * until a context switch is made to another, different FP task. - * Thus in a system with only one FP task, the FP context will never - * be saved or restored. - */ - -#define CPU_USE_DEFERRED_FP_SWITCH TRUE - -/* - * Does this port provide a CPU dependent IDLE task implementation? - * - * If TRUE, then the routine _CPU_Thread_Idle_body - * must be provided and is the default IDLE thread body instead of - * _CPU_Thread_Idle_body. - * - * If FALSE, then use the generic IDLE thread body if the BSP does - * not provide one. - * - * This is intended to allow for supporting processors which have - * a low power or idle mode. When the IDLE thread is executed, then - * the CPU can be powered down. - * - * The order of precedence for selecting the IDLE thread body is: - * - * 1. BSP provided - * 2. CPU dependent (if provided) - * 3. generic (if no BSP and no CPU dependent) - */ - -#define CPU_PROVIDES_IDLE_THREAD_BODY TRUE - -/* - * Does the stack grow up (toward higher addresses) or down - * (toward lower addresses)? - * - * If TRUE, then the grows upward. - * If FALSE, then the grows toward smaller addresses. - */ - -#if defined(__hppa__) -#define CPU_STACK_GROWS_UP TRUE -#elif defined(__sparc__) || defined(__i386__) -#define CPU_STACK_GROWS_UP FALSE -#else -#error "unknown CPU!!" -#endif - - -/* - * The following is the variable attribute used to force alignment - * of critical RTEMS structures. On some processors it may make - * sense to have these aligned on tighter boundaries than - * the minimum requirements of the compiler in order to have as - * much of the critical data area as possible in a cache line. - * - * The placement of this macro in the declaration of the variables - * is based on the syntactically requirements of the GNU C - * "__attribute__" extension. For example with GNU C, use - * the following to force a structures to a 32 byte boundary. - * - * __attribute__ ((aligned (32))) - * - * NOTE: Currently only the Priority Bit Map table uses this feature. - * To benefit from using this, the data must be heavily - * used so it will stay in the cache and used frequently enough - * in the executive to justify turning this on. - */ - -#ifdef __GNUC__ -#define CPU_STRUCTURE_ALIGNMENT __attribute__ ((aligned (32))) -#else -#define CPU_STRUCTURE_ALIGNMENT -#endif - -/* - * Define what is required to specify how the network to host conversion - * routines are handled. - */ - -#if defined(__hppa__) || defined(__sparc__) -#define CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE -#define CPU_BIG_ENDIAN TRUE -#define CPU_LITTLE_ENDIAN FALSE -#elif defined(__i386__) -#define CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE -#define CPU_BIG_ENDIAN FALSE -#define CPU_LITTLE_ENDIAN TRUE -#else -#error "Unknown CPU!!!" -#endif - -/* - * The following defines the number of bits actually used in the - * interrupt field of the task mode. How those bits map to the - * CPU interrupt levels is defined by the routine _CPU_ISR_Set_level(). - */ - -#define CPU_MODES_INTERRUPT_MASK 0x00000001 - -#define CPU_NAME "UNIX" - -/* - * Processor defined structures - * - * Examples structures include the descriptor tables from the i386 - * and the processor control structure on the i960ca. - */ - -/* may need to put some structures here. */ - -#if defined(__hppa__) -/* - * Word indices within a jmp_buf structure - */ - -#ifdef RTEMS_NEWLIB_SETJMP -#define RP_OFF 6 -#define SP_OFF 2 -#define R3_OFF 10 -#define R4_OFF 11 -#define R5_OFF 12 -#define R6_OFF 13 -#define R7_OFF 14 -#define R8_OFF 15 -#define R9_OFF 16 -#define R10_OFF 17 -#define R11_OFF 18 -#define R12_OFF 19 -#define R13_OFF 20 -#define R14_OFF 21 -#define R15_OFF 22 -#define R16_OFF 23 -#define R17_OFF 24 -#define R18_OFF 25 -#define DP_OFF 26 -#endif - -#ifdef RTEMS_UNIXLIB_SETJMP -#define RP_OFF 0 -#define SP_OFF 1 -#define R3_OFF 4 -#define R4_OFF 5 -#define R5_OFF 6 -#define R6_OFF 7 -#define R7_OFF 8 -#define R8_OFF 9 -#define R9_OFF 10 -#define R10_OFF 11 -#define R11_OFF 12 -#define R12_OFF 13 -#define R13_OFF 14 -#define R14_OFF 15 -#define R15_OFF 16 -#define R16_OFF 17 -#define R17_OFF 18 -#define R18_OFF 19 -#define DP_OFF 20 -#endif -#endif - -#if defined(__i386__) - -#ifdef RTEMS_NEWLIB -#error "Newlib not installed" -#endif - -/* - * For Linux 1.1 - */ - -#ifdef RTEMS_UNIXLIB -#if defined(__FreeBSD__) -#define RET_OFF 0 -#define EBX_OFF 1 -#define EBP_OFF 2 -#define ESP_OFF 3 -#define ESI_OFF 4 -#define EDI_OFF 5 -#else -#define EBX_OFF 0 -#define ESI_OFF 1 -#define EDI_OFF 2 -#define EBP_OFF 3 -#define ESP_OFF 4 -#define RET_OFF 5 -#endif -#endif - -#endif - -#if defined(__sparc__) - -/* - * Word indices within a jmp_buf structure - */ - -#ifdef RTEMS_NEWLIB -#define ADDR_ADJ_OFFSET -8 -#define SP_OFF 0 -#define RP_OFF 1 -#define FP_OFF 2 -#endif - -#ifdef RTEMS_UNIXLIB -#define ADDR_ADJ_OFFSET 0 -#define G0_OFF 0 -#define SP_OFF 1 -#define RP_OFF 2 -#define FP_OFF 3 -#define I7_OFF 4 -#endif - -#endif - -/* - * Contexts - * - * Generally there are 2 types of context to save. - * 1. Interrupt registers to save - * 2. Task level registers to save - * - * This means we have the following 3 context items: - * 1. task level context stuff:: Context_Control - * 2. floating point task stuff:: Context_Control_fp - * 3. special interrupt level context :: Context_Control_interrupt - * - * On some processors, it is cost-effective to save only the callee - * preserved registers during a task context switch. This means - * that the ISR code needs to save those registers which do not - * persist across function calls. It is not mandatory to make this - * distinctions between the caller/callee saves registers for the - * purpose of minimizing context saved during task switch and on interrupts. - * If the cost of saving extra registers is minimal, simplicity is the - * choice. Save the same context on interrupt entry as for tasks in - * this case. - * - * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then - * care should be used in designing the context area. - * - * On some CPUs with hardware floating point support, the Context_Control_fp - * structure will not be used or it simply consist of an array of a - * fixed number of bytes. This is done when the floating point context - * is dumped by a "FP save context" type instruction and the format - * is not really defined by the CPU. In this case, there is no need - * to figure out the exact format -- only the size. Of course, although - * this is enough information for RTEMS, it is probably not enough for - * a debugger such as gdb. But that is another problem. - */ - -/* - * This is really just the area for the following fields. - * - * jmp_buf regs; - * unsigned32 isr_level; - * - * Doing it this way avoids conflicts between the native stuff and the - * RTEMS stuff. - * - * NOTE: - * hpux9 setjmp is optimized for the case where the setjmp buffer - * is 8 byte aligned. In a RISC world, this seems likely to enable - * 8 byte copies, especially for the float registers. - * So we always align them on 8 byte boundaries. - */ - -#ifdef __GNUC__ -#define CONTEXT_STRUCTURE_ALIGNMENT __attribute__ ((aligned (8))) -#else -#define CONTEXT_STRUCTURE_ALIGNMENT -#endif - -typedef struct { - char Area[ CPU_CONTEXT_SIZE_IN_BYTES ] CONTEXT_STRUCTURE_ALIGNMENT; -} Context_Control; - -typedef struct { -} Context_Control_fp; - -typedef struct { -} CPU_Interrupt_frame; - - -/* - * The following table contains the information required to configure - * the UNIX Simulator specific parameters. - */ - -typedef struct { - void (*pretasking_hook)( void ); - void (*predriver_hook)( void ); - void (*postdriver_hook)( void ); - void (*idle_task)( void ); - boolean do_zero_of_workspace; - unsigned32 idle_task_stack_size; - unsigned32 interrupt_stack_size; - unsigned32 extra_mpci_receive_server_stack; - void * (*stack_allocate_hook)( unsigned32 ); - void (*stack_free_hook)( void* ); - /* end of required fields */ -} rtems_cpu_table; - -/* - * This variable is optional. It is used on CPUs on which it is difficult - * to generate an "uninitialized" FP context. It is filled in by - * _CPU_Initialize and copied into the task's FP context area during - * _CPU_Context_Initialize. - */ - -SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context; - -/* - * On some CPUs, RTEMS supports a software managed interrupt stack. - * This stack is allocated by the Interrupt Manager and the switch - * is performed in _ISR_Handler. These variables contain pointers - * to the lowest and highest addresses in the chunk of memory allocated - * for the interrupt stack. Since it is unknown whether the stack - * grows up or down (in general), this give the CPU dependent - * code the option of picking the version it wants to use. - * - * NOTE: These two variables are required if the macro - * CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE. - */ - -SCORE_EXTERN void *_CPU_Interrupt_stack_low; -SCORE_EXTERN void *_CPU_Interrupt_stack_high; - -/* - * With some compilation systems, it is difficult if not impossible to - * call a high-level language routine from assembly language. This - * is especially true of commercial Ada compilers and name mangling - * C++ ones. This variable can be optionally defined by the CPU porter - * and contains the address of the routine _Thread_Dispatch. This - * can make it easier to invoke that routine at the end of the interrupt - * sequence (if a dispatch is necessary). - */ - -SCORE_EXTERN void (*_CPU_Thread_dispatch_pointer)(); - -/* - * Nothing prevents the porter from declaring more CPU specific variables. - */ - -/* XXX: if needed, put more variables here */ - -/* - * The size of the floating point context area. On some CPUs this - * will not be a "sizeof" because the format of the floating point - * area is not defined -- only the size is. This is usually on - * CPUs with a "floating point save context" instruction. - */ - -#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) - -/* - * The size of a frame on the stack - */ - -#if defined(__hppa__) -#define CPU_FRAME_SIZE (32 * 4) -#elif defined(__sparc__) -#define CPU_FRAME_SIZE (112) /* based on disassembled test code */ -#elif defined(__i386__) -#define CPU_FRAME_SIZE (24) /* return address, sp, and bp pushed plus fudge */ -#else -#error "Unknown CPU!!!" -#endif - -/* - * Amount of extra stack (above minimum stack size) required by - * MPCI receive server thread. Remember that in a multiprocessor - * system this thread must exist and be able to process all directives. - */ - -#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0 - -/* - * This defines the number of entries in the ISR_Vector_table managed - * by RTEMS. - */ - -#define CPU_INTERRUPT_NUMBER_OF_VECTORS 64 -#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) - -/* - * Should be large enough to run all RTEMS tests. This insures - * that a "reasonable" small application should not have any problems. - */ - -#define CPU_STACK_MINIMUM_SIZE (16 * 1024) - -/* - * CPU's worst alignment requirement for data types on a byte boundary. This - * alignment does not take into account the requirements for the stack. - */ - -#define CPU_ALIGNMENT 8 - -/* - * This number corresponds to the byte alignment requirement for the - * heap handler. This alignment requirement may be stricter than that - * for the data types alignment specified by CPU_ALIGNMENT. It is - * common for the heap to follow the same alignment requirement as - * CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict enough for the heap, - * then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for memory - * buffers allocated by the partition manager. This alignment requirement - * may be stricter than that for the data types alignment specified by - * CPU_ALIGNMENT. It is common for the partition to follow the same - * alignment requirement as CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict - * enough for the partition, then this should be set to CPU_ALIGNMENT. - * - * NOTE: This does not have to be a power of 2. It does have to - * be greater or equal to than CPU_ALIGNMENT. - */ - -#define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT - -/* - * This number corresponds to the byte alignment requirement for the - * stack. This alignment requirement may be stricter than that for the - * data types alignment specified by CPU_ALIGNMENT. If the CPU_ALIGNMENT - * is strict enough for the stack, then this should be set to 0. - * - * NOTE: This must be a power of 2 either 0 or greater than CPU_ALIGNMENT. - */ - -#define CPU_STACK_ALIGNMENT 64 - -/* ISR handler macros */ - -/* - * Disable all interrupts for an RTEMS critical section. The previous - * level is returned in _level. - */ - -extern unsigned32 _CPU_ISR_Disable_support(void); - -#define _CPU_ISR_Disable( _level ) \ - do { \ - (_level) = _CPU_ISR_Disable_support(); \ - } while ( 0 ) - -/* - * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). - * This indicates the end of an RTEMS critical section. The parameter - * _level is not modified. - */ - -void _CPU_ISR_Enable(unsigned32 level); - -/* - * This temporarily restores the interrupt to _level before immediately - * disabling them again. This is used to divide long RTEMS critical - * sections into two or more parts. The parameter _level is not - * modified. - */ - -#define _CPU_ISR_Flash( _level ) \ - do { \ - register unsigned32 _ignored = 0; \ - _CPU_ISR_Enable( (_level) ); \ - _CPU_ISR_Disable( _ignored ); \ - } while ( 0 ) - -/* - * Map interrupt level in task mode onto the hardware that the CPU - * actually provides. Currently, interrupt levels which do not - * map onto the CPU in a generic fashion are undefined. Someday, - * it would be nice if these were "mapped" by the application - * via a callout. For example, m68k has 8 levels 0 - 7, levels - * 8 - 255 would be available for bsp/application specific meaning. - * This could be used to manage a programmable interrupt controller - * via the rtems_task_mode directive. - */ - -#define _CPU_ISR_Set_level( new_level ) \ - { \ - if ( new_level == 0 ) _CPU_ISR_Enable( 0 ); \ - else _CPU_ISR_Enable( 1 ); \ - } - -unsigned32 _CPU_ISR_Get_level( void ); - -/* end of ISR handler macros */ - -/* Context handler macros */ - -/* - * This routine is responsible for somehow restarting the currently - * executing task. If you are lucky, then all that is necessary - * is restoring the context. Otherwise, there will need to be - * a special assembly routine which does something special in this - * case. Context_Restore should work most of the time. It will - * not work if restarting self conflicts with the stack frame - * assumptions of restoring a context. - */ - -#define _CPU_Context_Restart_self( _the_context ) \ - _CPU_Context_restore( (_the_context) ); - -/* - * The purpose of this macro is to allow the initial pointer into - * a floating point context area (used to save the floating point - * context) to be at an arbitrary place in the floating point - * context area. - * - * This is necessary because some FP units are designed to have - * their context saved as a stack which grows into lower addresses. - * Other FP units can be saved by simply moving registers into offsets - * from the base of the context area. Finally some FP units provide - * a "dump context" instruction which could fill in from high to low - * or low to high based on the whim of the CPU designers. - */ - -#define _CPU_Context_Fp_start( _base, _offset ) \ - ( (void *) _Addresses_Add_offset( (_base), (_offset) ) ) - -/* - * This routine initializes the FP context area passed to it to. - * There are a few standard ways in which to initialize the - * floating point context. The code included for this macro assumes - * that this is a CPU in which a "initial" FP context was saved into - * _CPU_Null_fp_context and it simply copies it to the destination - * context passed to it. - * - * Other models include (1) not doing anything, and (2) putting - * a "null FP status word" in the correct place in the FP context. - */ - -#define _CPU_Context_Initialize_fp( _destination ) \ - { \ - *((Context_Control_fp *) *((void **) _destination)) = _CPU_Null_fp_context; \ - } - -#define _CPU_Context_save_fp( _fp_context ) \ - _CPU_Save_float_context( *(Context_Control_fp **)(_fp_context)) - -#define _CPU_Context_restore_fp( _fp_context ) \ - _CPU_Restore_float_context( *(Context_Control_fp **)(_fp_context)) - -extern void _CPU_Context_Initialize( - Context_Control *_the_context, - unsigned32 *_stack_base, - unsigned32 _size, - unsigned32 _new_level, - void *_entry_point, - boolean _is_fp -); - -/* end of Context handler macros */ - -/* Fatal Error manager macros */ - -/* - * This routine copies _error into a known place -- typically a stack - * location or a register, optionally disables interrupts, and - * halts/stops the CPU. - */ - -#define _CPU_Fatal_halt( _error ) \ - _CPU_Fatal_error( _error ) - -/* end of Fatal Error manager macros */ - -/* Bitfield handler macros */ - -/* - * This routine sets _output to the bit number of the first bit - * set in _value. _value is of CPU dependent type Priority_Bit_map_control. - * This type may be either 16 or 32 bits wide although only the 16 - * least significant bits will be used. - * - * There are a number of variables in using a "find first bit" type - * instruction. - * - * (1) What happens when run on a value of zero? - * (2) Bits may be numbered from MSB to LSB or vice-versa. - * (3) The numbering may be zero or one based. - * (4) The "find first bit" instruction may search from MSB or LSB. - * - * RTEMS guarantees that (1) will never happen so it is not a concern. - * (2),(3), (4) are handled by the macros _CPU_Priority_mask() and - * _CPU_Priority_bits_index(). These three form a set of routines - * which must logically operate together. Bits in the _value are - * set and cleared based on masks built by _CPU_Priority_mask(). - * The basic major and minor values calculated by _Priority_Major() - * and _Priority_Minor() are "massaged" by _CPU_Priority_bits_index() - * to properly range between the values returned by the "find first bit" - * instruction. This makes it possible for _Priority_Get_highest() to - * calculate the major and directly index into the minor table. - * This mapping is necessary to ensure that 0 (a high priority major/minor) - * is the first bit found. - * - * This entire "find first bit" and mapping process depends heavily - * on the manner in which a priority is broken into a major and minor - * components with the major being the 4 MSB of a priority and minor - * the 4 LSB. Thus (0 << 4) + 0 corresponds to priority 0 -- the highest - * priority. And (15 << 4) + 14 corresponds to priority 254 -- the next - * to the lowest priority. - * - * If your CPU does not have a "find first bit" instruction, then - * there are ways to make do without it. Here are a handful of ways - * to implement this in software: - * - * - a series of 16 bit test instructions - * - a "binary search using if's" - * - _number = 0 - * if _value > 0x00ff - * _value >>=8 - * _number = 8; - * - * if _value > 0x0000f - * _value >=8 - * _number += 4 - * - * _number += bit_set_table[ _value ] - * - * where bit_set_table[ 16 ] has values which indicate the first - * bit set - */ - -/* - * The UNIX port uses the generic C algorithm for bitfield scan to avoid - * dependencies on either a native bitscan instruction or an ffs() in the - * C library. - */ - -#define CPU_USE_GENERIC_BITFIELD_CODE TRUE -#define CPU_USE_GENERIC_BITFIELD_DATA TRUE - -/* end of Bitfield handler macros */ - -/* Priority handler handler macros */ - -/* - * The UNIX port uses the generic C algorithm for bitfield scan to avoid - * dependencies on either a native bitscan instruction or an ffs() in the - * C library. - */ - -/* end of Priority handler macros */ - -/* functions */ - -/* - * _CPU_Initialize - * - * This routine performs CPU dependent initialization. - */ - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch) -); - -/* - * _CPU_ISR_install_raw_handler - * - * This routine installs a "raw" interrupt handler directly into the - * processor's vector table. - */ - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_ISR_install_vector - * - * This routine installs an interrupt vector. - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -); - -/* - * _CPU_Install_interrupt_stack - * - * This routine installs the hardware interrupt stack pointer. - * - * NOTE: It need only be provided if CPU_HAS_HARDWARE_INTERRUPT_STACK - * is TRUE. - */ - -void _CPU_Install_interrupt_stack( void ); - -/* - * _CPU_Thread_Idle_body - * - * This routine is the CPU dependent IDLE thread body. - * - * NOTE: It need only be provided if CPU_PROVIDES_IDLE_THREAD_BODY - * is TRUE. - */ - -void _CPU_Thread_Idle_body( void ); - -/* - * _CPU_Context_switch - * - * This routine switches from the run context to the heir context. - */ - -void _CPU_Context_switch( - Context_Control *run, - Context_Control *heir -); - -/* - * _CPU_Context_restore - * - * This routine is generally used only to restart self in an - * efficient manner. It may simply be a label in _CPU_Context_switch. - * - * NOTE: May be unnecessary to reload some registers. - */ - -void _CPU_Context_restore( - Context_Control *new_context -); - -/* - * _CPU_Save_float_context - * - * This routine saves the floating point context passed to it. - */ - -void _CPU_Save_float_context( - Context_Control_fp *fp_context_ptr -); - -/* - * _CPU_Restore_float_context - * - * This routine restores the floating point context passed to it. - */ - -void _CPU_Restore_float_context( - Context_Control_fp *fp_context_ptr -); - - -void _CPU_ISR_Set_signal_level( - unsigned32 level -); - -void _CPU_Fatal_error( - unsigned32 _error -); - -/* The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. - * - * This version will work on any processor, but if there is a better - * way for your CPU PLEASE use it. The most common way to do this is to: - * - * swap least significant two bytes with 16-bit rotate - * swap upper and lower 16-bits - * swap most significant two bytes with 16-bit rotate - * - * Some CPUs have special instructions which swap a 32-bit quantity in - * a single instruction (e.g. i486). It is probably best to avoid - * an "endian swapping control bit" in the CPU. One good reason is - * that interrupts would probably have to be disabled to insure that - * an interrupt does not try to access the same "chunk" with the wrong - * endian. Another good reason is that on some CPUs, the endian bit - * endianness for ALL fetches -- both code and data -- so the code - * will be fetched incorrectly. - */ - -static inline unsigned int CPU_swap_u32( - unsigned int value -) -{ - unsigned32 byte1, byte2, byte3, byte4, swapped; - - byte4 = (value >> 24) & 0xff; - byte3 = (value >> 16) & 0xff; - byte2 = (value >> 8) & 0xff; - byte1 = value & 0xff; - - swapped = (byte1 << 24) | (byte2 << 16) | (byte3 << 8) | byte4; - return( swapped ); -} - -#define CPU_swap_u16( value ) \ - (((value&0xff) << 8) | ((value >> 8)&0xff)) - -/* - * Special Purpose Routines to hide the use of UNIX system calls. - */ - - -/* - * Pointer to a sync io Handler - */ - -typedef void ( *rtems_sync_io_handler )( - int fd, - boolean read, - boolean wrtie, - boolean except -); - -/* returns -1 if fd to large, 0 is successful */ -int _CPU_Set_sync_io_handler( - int fd, - boolean read, - boolean write, - boolean except, - rtems_sync_io_handler handler -); - -/* returns -1 if fd to large, o if successful */ -int _CPU_Clear_sync_io_handler( - int fd -); - -int _CPU_Get_clock_vector( void ); - -void _CPU_Start_clock( - int microseconds -); - -void _CPU_Stop_clock( void ); - -void _CPU_SHM_Init( - unsigned32 maximum_nodes, - boolean is_master_node, - void **shm_address, - unsigned32 *shm_length -); - -int _CPU_Get_pid( void ); - -int _CPU_SHM_Get_vector( void ); - -void _CPU_SHM_Send_interrupt( - int pid, - int vector -); - -void _CPU_SHM_Lock( - int semaphore -); - -void _CPU_SHM_Unlock( - int semaphore -); - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/c/src/exec/score/cpu/unix/unix.h b/c/src/exec/score/cpu/unix/unix.h deleted file mode 100644 index 52cfef79e4..0000000000 --- a/c/src/exec/score/cpu/unix/unix.h +++ /dev/null @@ -1,65 +0,0 @@ -/* unix.h - * - * This include file contains the definitions required by RTEMS - * which are typical for a modern UNIX computer using GCC. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __UNIX_h -#define __UNIX_h - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * This file contains the information required to build - * RTEMS for a particular member of the "unix" - * family when executing in protected mode. It does - * this by setting variables to indicate which implementation - * dependent features are present in a particular member - * of the family. - */ - -#if defined(hpux) - -#define CPU_MODEL_NAME "HP-UX" - -#elif defined(solaris2) - -#define CPU_MODEL_NAME "Solaris" - -#elif defined(__linux__) - -#define CPU_MODEL_NAME "Linux" - -#elif defined(linux) - -#define CPU_MODEL_NAME "Linux" - -#elif defined(__FreeBSD__) - -#define CPU_MODEL_NAME "FreeBSD" - -#else - -#error "Unsupported CPU Model" - -#endif - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ - diff --git a/c/src/exec/score/cpu/unix/unixtypes.h b/c/src/exec/score/cpu/unix/unixtypes.h deleted file mode 100644 index 1ecaa2307d..0000000000 --- a/c/src/exec/score/cpu/unix/unixtypes.h +++ /dev/null @@ -1,72 +0,0 @@ -/* unixtypes.h - * - * This include file contains type definitions which are appropriate - * for a typical modern UNIX box using GNU C for the RTEMS simulator. - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ - -#ifndef __UNIX_TYPES_h -#define __UNIX_TYPES_h - -#ifndef ASM - -#ifdef __cplusplus -extern "C" { -#endif - -/* - * some C++ compilers (eg: HP's) don't do 'signed' or 'volatile' - */ -#if defined(__cplusplus) && !defined(__GNUC__) -#define signed -#define volatile -#endif - -/* - * This section defines the basic types for this processor. - */ - -typedef unsigned char unsigned8; /* unsigned 8-bit integer */ -typedef unsigned short unsigned16; /* unsigned 16-bit integer */ -typedef unsigned int unsigned32; /* unsigned 32-bit integer */ - -typedef unsigned16 Priority_Bit_map_control; - -typedef signed char signed8; /* 8-bit signed integer */ -typedef signed short signed16; /* 16-bit signed integer */ -typedef signed int signed32; /* 32-bit signed integer */ - -/* - * some C++ compilers (eg: HP's) don't do 'long long' - */ -#if defined(__GNUC__) -typedef unsigned long long unsigned64; /* unsigned 64-bit integer */ -typedef signed long long signed64; /* 64 bit signed integer */ -#endif - -typedef unsigned32 boolean; /* Boolean value */ - -typedef float single_precision; /* single precision float */ -typedef double double_precision; /* double precision float */ - -typedef void unix_isr; - -typedef unix_isr ( *unix_isr_entry )( void ); - -#ifdef __cplusplus -} -#endif - -#endif /* !ASM */ - -#endif -/* end of include file */ |