diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/mpc8260ads/include/bspopts.h.in')
-rw-r--r-- | c/src/lib/libbsp/powerpc/mpc8260ads/include/bspopts.h.in | 68 |
1 files changed, 68 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/powerpc/mpc8260ads/include/bspopts.h.in b/c/src/lib/libbsp/powerpc/mpc8260ads/include/bspopts.h.in new file mode 100644 index 0000000000..0f8230e492 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/mpc8260ads/include/bspopts.h.in @@ -0,0 +1,68 @@ +/* include/bspopts.h.in. Generated from configure.ac by autoheader. */ + +/* enables the data cache, if defined to a value other than zero */ +#undef BSP_DATA_CACHE_ENABLED + +/* If defined, then the BSP Framework will put a non-zero pattern into the + RTEMS Workspace and C program heap. This should assist in finding code that + assumes memory starts set to zero. */ +#undef BSP_DIRTY_MEMORY + +/* enables the instruction cache, if defined to a value other than zero */ +#undef BSP_INSTRUCTION_CACHE_ENABLED + +/* If defined, print a message and wait until pressed before resetting board + when application exits. */ +#undef BSP_PRESS_KEY_FOR_RESET + +/* If defined, reset the board when the application exits. */ +#undef BSP_RESET_BOARD_AT_EXIT + +/* (BSP--console driver) Must be defined to be one of SMC1_MINOR, SMC2_MINOR, + SCC2_MINOR, SCC3_MINOR, or SCC4_MINOR. Determines which device will be + registered as /dev/console. */ +#undef CONSOLE_MINOR + +/* used by irq/irq.c */ +#undef DISPATCH_HANDLER_STAT + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* (BSP--console driver) Must be defined to be one of SMC1_MINOR, SMC2_MINOR, + SCC2_MINOR, SCC3_MINOR, or SCC4_MINOR. Determines which device is used for + output by printk(). If the port that printk() uses is also used for other + I/O (e.g. if PRINTK_MINOR == \$CONSOLE_MINOR), then both ports should use + the same type of I/O, otherwise the drivers will likely conflict with each + other. */ +#undef PRINTK_MINOR + +/* (BSP--console driver) Define to 0 or 1 if you want polled I/O performed by + RTEMS. Define to 1 if you want interrupt-driven performed by RTEMS. Define + to 2 if you want polled I/O performed by EPPCBug. There is no provision to + have a mix of interrupt-driven and polled I/O ports, except that the printk + port may use a different mode from the other ports. If this is done, do not + open the printk port from an RTEMS application. With EPPCBug 1.1, if mode 2 + is selected, CONSOLE_MINOR must be set to SMC1_MINOR. This is a deficiency + of the firmware: it does not perform serial I/O on any port other than its + default debug port, which must be SMC1. */ +#undef UARTS_IO_MODE + +/* Define to 1 if you want termios support for every port. Termios support is + independent of the choice of UART I/O mode. */ +#undef UARTS_USE_TERMIOS |