diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/mpc55xxevb/include/bspopts.h.in')
-rw-r--r-- | c/src/lib/libbsp/powerpc/mpc55xxevb/include/bspopts.h.in | 114 |
1 files changed, 114 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/powerpc/mpc55xxevb/include/bspopts.h.in b/c/src/lib/libbsp/powerpc/mpc55xxevb/include/bspopts.h.in new file mode 100644 index 0000000000..5049d2ea3f --- /dev/null +++ b/c/src/lib/libbsp/powerpc/mpc55xxevb/include/bspopts.h.in @@ -0,0 +1,114 @@ +/* include/bspopts.h.in. Generated from configure.ac by autoheader. */ + +/* enables the data cache, if defined to a value other than zero */ +#undef BSP_DATA_CACHE_ENABLED + +/* If defined, then the BSP Framework will put a non-zero pattern into the + RTEMS Workspace and C program heap. This should assist in finding code that + assumes memory starts set to zero. */ +#undef BSP_DIRTY_MEMORY + +/* enables the instruction cache, if defined to a value other than zero */ +#undef BSP_INSTRUCTION_CACHE_ENABLED + +/* defines the maximum number of interrupt handlers */ +#undef BSP_INTERRUPT_HANDLER_TABLE_SIZE + +/* If defined, print a message and wait until pressed before resetting board + when application exits. */ +#undef BSP_PRESS_KEY_FOR_RESET + +/* If defined, reset the board when the application exits. */ +#undef BSP_RESET_BOARD_AT_EXIT + +/* If defined the board has the SMC91111 networking chip. */ +#undef HAS_SMC91111 + +/* if defined, use custom settings for GWLCFM board */ +#undef MPC55XX_BOARD_GWLCFM + +/* if defined, use custom settings for MPC5566EVB board */ +#undef MPC55XX_BOARD_MPC5566EVB + +/* if defined, use custom settings for MPC5674FEVB board */ +#undef MPC55XX_BOARD_MPC5674FEVB + +/* if defined, use custom settings for phyCORE MPC5554 board */ +#undef MPC55XX_BOARD_PHYCORE_MPC5554 + +/* if defined, use custom settings for XKT564LEVB board */ +#undef MPC55XX_BOARD_XKT564LEVB + +/* if defined, builds in bootflags above the RCHW for setup in a debugger to + avoid startup MMU setup */ +#undef MPC55XX_BOOTFLAGS + +/* specifies the chip type in use (e.g. 5554 for MPC5554) */ +#undef MPC55XX_CHIP_TYPE + +/* selects the eMIOS channel for the RTEMS system tick (the default is the + last channel) */ +#undef MPC55XX_CLOCK_EMIOS_CHANNEL + +/* selects the PIT channel for the RTEMS system tick (the default is the last + channel) */ +#undef MPC55XX_CLOCK_PIT_CHANNEL + +/* size of the early initialization stack in bytes */ +#undef MPC55XX_EARLY_STACK_SIZE + +/* Must be defined to set the EMIOS prescaler */ +#undef MPC55XX_EMIOS_PRESCALER + +/* determines which eSCI device will be registered as /dev/console */ +#undef MPC55XX_ESCI_CONSOLE_MINOR + +/* define to zero or one to disable or enable interrupts for the eSCI devices + */ +#undef MPC55XX_ESCI_USE_INTERRUPTS + +/* Must be defined to be the PLL output clock (in Hz) for clock generation */ +#undef MPC55XX_FMPLL_CLK_OUT + +/* Must be defined to be the PLL multiplication factor for clock generation */ +#undef MPC55XX_FMPLL_MFD + +/* Must be defined to be the PLL predivider factor for clock generation */ +#undef MPC55XX_FMPLL_PREDIV + +/* Must be defined to be the external reference clock (in Hz) for clock + generation */ +#undef MPC55XX_FMPLL_REF_CLOCK + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* EEPROM name for LibI2C */ +#undef RTEMS_BSP_I2C_EEPROM_DEVICE_NAME + +/* EEPROM device file path */ +#undef RTEMS_BSP_I2C_EEPROM_DEVICE_PATH + +/* If defined the SMC91111 chip has the ethernet address loaded at reset. */ +#undef SMC91111_ENADDR_IS_SETUP + +/* receive eDMA channel for SMSC9218I network interface */ +#undef SMSC9218I_EDMA_RX_CHANNEL + +/* transmit eDMA channel for SMSC9218I network interface */ +#undef SMSC9218I_EDMA_TX_CHANNEL |