diff options
Diffstat (limited to 'c/src/lib/libbsp/powerpc/gen5200/include/bspopts.h.in')
| -rw-r--r-- | c/src/lib/libbsp/powerpc/gen5200/include/bspopts.h.in | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/powerpc/gen5200/include/bspopts.h.in b/c/src/lib/libbsp/powerpc/gen5200/include/bspopts.h.in new file mode 100644 index 0000000000..fae44b7a23 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/gen5200/include/bspopts.h.in @@ -0,0 +1,85 @@ +/* include/bspopts.h.in. Generated from configure.ac by autoheader. */ + +/* If set to !0, allow nested IRQ processing. */ +#undef ALLOW_IRQ_NESTING + +/* If set to !0, enable code to benchmark IRQ processing. */ +#undef BENCHMARK_IRQ_PROCESSING + +/* enable settings for BRS5L */ +#undef BRS5L + +/* enables the data cache, if defined to a value other than zero */ +#undef BSP_DATA_CACHE_ENABLED + +/* If defined, then the BSP Framework will put a non-zero pattern into the + RTEMS Workspace and C program heap. This should assist in finding code that + assumes memory starts set to zero. */ +#undef BSP_DIRTY_MEMORY + +/* defines the bits modified in the MPC5200 GPIOPCR register during init. Must + match the hardware requirements */ +#undef BSP_GPIOPCR_INITMASK + +/* defines the bit values written in the MPC5200 GPIOPCR register during init. + Must match the hardware requirements */ +#undef BSP_GPIOPCR_INITVAL + +/* enables the instruction cache, if defined to a value other than zero */ +#undef BSP_INSTRUCTION_CACHE_ENABLED + +/* If defined, print a message and wait until pressed before resetting board + when application exits. */ +#undef BSP_PRESS_KEY_FOR_RESET + +/* If defined, reset the board when the application exits. */ +#undef BSP_RESET_BOARD_AT_EXIT + +/* enable settings for DP2 */ +#undef BSP_TYPE_DP2 + +/* bit mask to specify the UARTS (PSCs), which should be enabled on this + board. Must match the hardware requirements. PSC1 corresponds to the LSB */ +#undef BSP_UART_AVAIL_MASK + +/* enable U-Boot startup */ +#undef HAS_UBOOT + +/* PSC index for GPS module, if defined results in '/dev/gps' */ +#undef MPC5200_PSC_INDEX_FOR_GPS_MODULE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* enable settings for PM520 CR825 */ +#undef PM520_CR825 + +/* enable settings for PM520 ZE30 */ +#undef PM520_ZE30 + +/* console minor number used by printk() */ +#undef PRINTK_MINOR + +/* enable single character mode for the PSC console driver */ +#undef SINGLE_CHAR_MODE + +/* enable interrupt support for the PSC console driver */ +#undef UARTS_USE_TERMIOS_INT + +/* enable settings for IceCube */ +#undef icecube |