1 files changed, 0 insertions, 145 deletions
diff --git a/c/src/lib/libbsp/mips/genmongoosev/startup/gdb-support.c b/c/src/lib/libbsp/mips/genmongoosev/startup/gdb-support.c
deleted file mode 100644
index 6d064de4d2..0000000000
--- a/c/src/lib/libbsp/mips/genmongoosev/startup/gdb-support.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- *  GDB Support Routines for the Mongoose-V
- */
-
-/*
- *  COPYRIGHT (c) 1989-2014.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp.h>
-#include <rtems/bspIo.h>
-#include <bsp/mongoose-v.h>
-#include "gdb_if.h"
-
-#include <rtems/libio.h>
-
-#include <stdio.h>
-#include <string.h>
-
-/*
-
-We're going to call right down into the uart driver because we're
-operating within an exception.  if things are broken because something
-bad happened, this may be our last chance to debug before RTEMS goes
-mad, so we won't rely on the I/O subsystem to be operating.  This is a
-little messy, but at least we're not talking right to the hardware.
-
-*/
-
-extern int mg5uart_set_attributes(int minor,const struct termios *t);
-extern int mg5uart_open(int major,int minor, void *arg);
-extern int mg5uart_close(int major,int minor, void *arg);
-extern void mg5uart_write_polled(int minor, char c );
-extern int mg5uart_inbyte_nonblocking_polled(int minor);
-
-/*
- *  Prototypes for methods assumed to exist by the gdb stub
- */
-char getDebugChar (void);
-void putDebugChar (char c);
-
-static int debugUartEnabled = 0;
-
-int mg5rdbgOpenGDBuart(int breakoninit)
-{
-   struct termios t;
-   memset(&t,0,sizeof(struct termios));
-
-   if( mg5uart_open(0,1,NULL) != RTEMS_SUCCESSFUL )
-   {
-      printf("gdbstub: Failed to open UART port 2\n");
-      return -1;
-   }
-
-   t.c_cflag |= B19200;
-   t.c_cflag |= CS8;
-   if( mg5uart_set_attributes(1,&t) != 0 )
-   {
-      printf("gdbstub: Failed to configure UART 2 for 19200N82\n");
-      return -1;
-   }
-   printf("gdbstub: UART 2 configured for 19200N82\n");
-
-   debugUartEnabled  = -1;
-
-   /* set up vectoring for gdb */
-   mips_gdb_stub_install(-1);
-
-   /*
-      this is a rough approximation of our memory map.  Yours is
-      probably different.  It only needs to be sufficient for the stub
-      to know what it can and can't do and where.
-   */
-   gdbstub_add_memsegment(0         , 0x8001ffff, MEMOPT_READABLE );
-   gdbstub_add_memsegment(0x80020000, 0x80afffff, MEMOPT_READABLE | MEMOPT_WRITEABLE );
-   gdbstub_add_memsegment(0x80b00000, 0x814fffff, MEMOPT_READABLE );
-   gdbstub_add_memsegment(0x81500000, 0x81ffffff, MEMOPT_READABLE | MEMOPT_WRITEABLE );
-
-   if( breakoninit )
-   {
-      printf("gdbstub: GDB stub entered, connect host debugger now\n");
-      /*
-         break to gdb.  We'll wait there for the operator to get their gdb
-         going, then they can 'continue' or do whatever.
-      */
-      mips_break(0);
-      printf("gdbstub: User code running\n");
-   }
-   else
-      printf("gdbstub: GDB stub ready for exceptions\n");
-
-   return RTEMS_SUCCESSFUL;
-}
-
-void mg5rdbgCloseGDBuart(void)
-{
-   mg5uart_close(0,1,NULL);
-   debugUartEnabled  = 0;
-}
-
-char getDebugChar (void)
-{
-   if( debugUartEnabled )
-   {
-      int rv;
-
-      while( (rv = mg5uart_inbyte_nonblocking_polled(1)) < 0 );
-      return (char)rv;
-   }
-
-   return 0;
-}
-
-void putDebugChar (char c)
-{
-   if( debugUartEnabled )
-      return mg5uart_write_polled(1,c);
-}
-
-/*
-   {
-      * initialize hardware pc and data breakpoints to quiet state*
-      uint32_t   dcic, reg, mask;
-
-      reg = 0xffffffff;
-      mask = 0xffffffff;
-
-      mips_set_bpcrm( reg, mask );
-      mips_set_bdarm( reg, mask );
-
-      mips_get_dcic( dcic );
-      * configure dcic for trapping, user & kernel mode, PC traps and enable it *
-      dcic = DCIC_TR | DCIC_UD | DCIC_KD | DCIC_PCE | DCIC_DE;
-      * dcic = DCIC_UD | DCIC_KD | DCIC_PCE | DCIC_DE; *
-      mips_set_dcic( dcic );
-
-      mips_get_bpcrm( reg, mask );
-      mips_get_dcic( dcic );
-      * printf("bpc is %08X, bpc_mask is %08X, dcic is now %08X\n", reg, mask, dcic ); *
-   }
-*/