1 files changed, 0 insertions, 101 deletions
diff --git a/c/src/lib/libbsp/mips/genmongoosev/console/README.mguart b/c/src/lib/libbsp/mips/genmongoosev/console/README.mguart
deleted file mode 100644
index 8073ab7526..0000000000
--- a/c/src/lib/libbsp/mips/genmongoosev/console/README.mguart
+++ /dev/null
@@ -1,101 +0,0 @@
-Configuration Table Use
-=======================
-
-sDeviceName
-
-   The name of this device.
-
-deviceType
-
-   This field must be SERIAL_MG5UART.
-
-pDeviceFns
-
-   The device interface control table.  This may be:
-      + mg5uart_fns for interrupt driven IO
-      + mg5uart_fns_polled for polled IO
-
-deviceProbe
-
-   This is the address of the routine which probes to see if the device
-   is present.
-
-pDeviceFlow
-
-   This field is ignored as hardware flow control is not currently supported.
-
-ulMargin
-
-    This is currently unused.
-
-ulHysteresis
-
-    This is currently unused.
-
-pDeviceParams
-
-    This is set to the default settings.
-
-ulCtrlPort1
-
-   This field is the address of the command register shared by both ports.
-
-ulCtrlPort2
-
-   This field is the address of the port being used.
-
-ulDataPort
-
-   This field is set to MG5UART_PORTA or MG5UART_PORTB.
-
-getRegister
-setRegister
-
-   These do NOT follow standard conventions and are ignored.
-   The register address routines are hard-coded as this is 
-   an on-CPU part and assumed to provide a 32-bit wide interface.
-
-getData
-
-   This is address of the RX buffer register.
-
-setData
-
-   This is address of the TX buffer register.
-
-ulClock
-
-   baudRate Clock
-
-ulIntVector
-
-   This is the interrupt vector number associated with this chip.
-
-Example:
-
-#if (CONSOLE_USE_INTERRUPTS)
-#define MG5UART_FUNCTIONS &mg5uart_fns
-#else
-#define MG5UART_FUNCTIONS &mg5uart_fns_polled
-#endif
-
-{
-  "/dev/com0",                            /* sDeviceName */
-  SERIAL_MG5UART,                         /* deviceType */
-  MG5UART_FUNCTIONS,                      /* pDeviceFns */
-  NULL,                                   /* deviceProbe, assume it is there */
-  NULL,                                   /* pDeviceFlow */
-  16,                                     /* ulMargin */
-  8,                                      /* ulHysteresis */
-  (void *) NULL,               /* NULL */ /* pDeviceParams */
-  MONGOOSEV_PERIPHERAL_COMMAND_REGISTER,  /* ulCtrlPort1 */
-  MONGOOSEV_UART0_BASE,                   /* ulCtrlPort2 */
-  MG5UART_UART0,                          /* ulDataPort */
-  mg5uart_get_register,                   /* getRegister */
-  mg5uart_set_register,                   /* setRegister */
-  NULL, /* unused */                      /* getData */
-  NULL, /* unused */                      /* setData */
-  12000000,                               /* ulClock */
-  MONGOOSEV_IRQ_UART0_RX_FRAME_ERROR      /* ulIntVector -- base for port */
-}
-