diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/lm3s69xx/configure.ac')
| -rw-r--r-- | c/src/lib/libbsp/arm/lm3s69xx/configure.ac | 36 |
1 files changed, 33 insertions, 3 deletions
diff --git a/c/src/lib/libbsp/arm/lm3s69xx/configure.ac b/c/src/lib/libbsp/arm/lm3s69xx/configure.ac index 82f9a7a9b2..833c56d3f9 100644 --- a/c/src/lib/libbsp/arm/lm3s69xx/configure.ac +++ b/c/src/lib/libbsp/arm/lm3s69xx/configure.ac @@ -21,13 +21,21 @@ RTEMS_PROG_CCAS RTEMS_CHECK_NETWORKING AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes") -RTEMS_BSPOPTS_SET([BSP_SMALL_MEMORY],[*],[]) +RTEMS_BSPOPTS_SET([BSP_SMALL_MEMORY],[*_qemu],[]) +RTEMS_BSPOPTS_SET([BSP_SMALL_MEMORY],[*],[1]) RTEMS_BSPOPTS_HELP([BSP_SMALL_MEMORY],[disable testsuite samples with high memory demands]) -RTEMS_BSPOPTS_SET([LM3S69XX_SYSTEM_CLOCK],[*],[50000000]) +RTEMS_BSPOPTS_SET([LM3S69XX_SYSTEM_CLOCK],[*],[50000000U]) RTEMS_BSPOPTS_HELP([LM3S69XX_SYSTEM_CLOCK],[system clock in Hz]) -RTEMS_BSPOPTS_SET([LM3S69XX_UART_BAUD],[*],[115200]) +RTEMS_BSPOPTS_SET([LM3S69XX_XTAL_CONFIG],[lm3s6965*],[0xE]) dnl 8MHz XTAL +RTEMS_BSPOPTS_SET([LM3S69XX_XTAL_CONFIG],[lm3s3749*],[0x10]) dnl 10MHz XTAL +RTEMS_BSPOPTS_HELP([LM3S69XX_XTAL_CONFIG],[crystal configuration for RCC register]) + +RTEMS_BSPOPTS_SET([LM3S69XX_SSI_CLOCK],[*],[1000000U]) +RTEMS_BSPOPTS_HELP([LM3S69XX_SSI_CLOCK],[SSI clock in Hz]) + +RTEMS_BSPOPTS_SET([LM3S69XX_UART_BAUD],[*],[115200U]) RTEMS_BSPOPTS_HELP([LM3S69XX_UART_BAUD],[baud for UARTs]) RTEMS_BSPOPTS_SET([LM3S69XX_ENABLE_UART_0],[*],[1]) @@ -39,6 +47,28 @@ RTEMS_BSPOPTS_HELP([LM3S69XX_ENABLE_UART_1],[enable UART 1]) RTEMS_BSPOPTS_SET([LM3S69XX_ENABLE_UART_2],[*],[]) RTEMS_BSPOPTS_HELP([LM3S69XX_ENABLE_UART_2],[enable UART 2]) +RTEMS_BSPOPTS_SET([LM3S69XX_NUM_GPIO_BLOCKS],[lm3s3749*],[8]) +RTEMS_BSPOPTS_SET([LM3S69XX_NUM_GPIO_BLOCKS],[lm3s6965*],[7]) +RTEMS_BSPOPTS_HELP([LM3S69XX_NUM_GPIO_BLOCKS],[number of GPIO blocks supported by MCU]) + +RTEMS_BSPOPTS_SET([LM3S69XX_NUM_SSI_BLOCKS],[lm3s3749*],[2]) +RTEMS_BSPOPTS_SET([LM3S69XX_NUM_SSI_BLOCKS],[lm3s6965*],[1]) +RTEMS_BSPOPTS_HELP([LM3S69XX_NUM_SSI_BLOCKS],[number of SSI blocks supported by MCU]) + +RTEMS_BSPOPTS_SET([LM3S69XX_HAS_UDMA],[lm3s3749*],[1]) +RTEMS_BSPOPTS_SET([LM3S69XX_HAS_UDMA],[*],[0]) +RTEMS_BSPOPTS_HELP([LM3S69XX_HAS_UDMA],[defined if MCU supports UDMA]) + +RTEMS_BSPOPTS_SET([LM3S69XX_USE_AHB_FOR_GPIO],[lm3s3749*],[1]) +RTEMS_BSPOPTS_SET([LM3S69XX_USE_AHB_FOR_GPIO],[*],[0]) +RTEMS_BSPOPTS_HELP([LM3S69XX_USE_AHB_FOR_GPIO],[use AHB apperture to access GPIO registers]) + +RTEMS_BSPOPTS_SET([LM3S69XX_MCU_LM3S3749],[lm3s3749*],[1]) +RTEMS_BSPOPTS_HELP([LM3S69XX_MCU_LM3S3749],[board has LM3S3749 MCU]) + +RTEMS_BSPOPTS_SET([LM3S69XX_MCU_LM3S6965],[lm3s6965*],[1]) +RTEMS_BSPOPTS_HELP([LM3S69XX_MCU_LM3S6965],[board has LM3S6965 MCU]) + RTEMS_BSP_CLEANUP_OPTIONS(0, 0) RTEMS_BSP_LINKCMDS |