diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/lm3s69xx/configure.ac')
| -rw-r--r-- | c/src/lib/libbsp/arm/lm3s69xx/configure.ac | 11 |
1 files changed, 10 insertions, 1 deletions
diff --git a/c/src/lib/libbsp/arm/lm3s69xx/configure.ac b/c/src/lib/libbsp/arm/lm3s69xx/configure.ac index 833c56d3f9..c9d40cf907 100644 --- a/c/src/lib/libbsp/arm/lm3s69xx/configure.ac +++ b/c/src/lib/libbsp/arm/lm3s69xx/configure.ac @@ -25,11 +25,13 @@ RTEMS_BSPOPTS_SET([BSP_SMALL_MEMORY],[*_qemu],[]) RTEMS_BSPOPTS_SET([BSP_SMALL_MEMORY],[*],[1]) RTEMS_BSPOPTS_HELP([BSP_SMALL_MEMORY],[disable testsuite samples with high memory demands]) -RTEMS_BSPOPTS_SET([LM3S69XX_SYSTEM_CLOCK],[*],[50000000U]) +RTEMS_BSPOPTS_SET([LM3S69XX_SYSTEM_CLOCK],[lm3s*],[50000000U]) +RTEMS_BSPOPTS_SET([LM3S69XX_SYSTEM_CLOCK],[lm4f*],[80000000U]) RTEMS_BSPOPTS_HELP([LM3S69XX_SYSTEM_CLOCK],[system clock in Hz]) RTEMS_BSPOPTS_SET([LM3S69XX_XTAL_CONFIG],[lm3s6965*],[0xE]) dnl 8MHz XTAL RTEMS_BSPOPTS_SET([LM3S69XX_XTAL_CONFIG],[lm3s3749*],[0x10]) dnl 10MHz XTAL +RTEMS_BSPOPTS_SET([LM3S69XX_XTAL_CONFIG],[lm4f120*],[0x15]) dnl 16MHz XTAL RTEMS_BSPOPTS_HELP([LM3S69XX_XTAL_CONFIG],[crystal configuration for RCC register]) RTEMS_BSPOPTS_SET([LM3S69XX_SSI_CLOCK],[*],[1000000U]) @@ -49,17 +51,21 @@ RTEMS_BSPOPTS_HELP([LM3S69XX_ENABLE_UART_2],[enable UART 2]) RTEMS_BSPOPTS_SET([LM3S69XX_NUM_GPIO_BLOCKS],[lm3s3749*],[8]) RTEMS_BSPOPTS_SET([LM3S69XX_NUM_GPIO_BLOCKS],[lm3s6965*],[7]) +RTEMS_BSPOPTS_SET([LM3S69XX_NUM_GPIO_BLOCKS],[lm4f120*],[6]) RTEMS_BSPOPTS_HELP([LM3S69XX_NUM_GPIO_BLOCKS],[number of GPIO blocks supported by MCU]) RTEMS_BSPOPTS_SET([LM3S69XX_NUM_SSI_BLOCKS],[lm3s3749*],[2]) RTEMS_BSPOPTS_SET([LM3S69XX_NUM_SSI_BLOCKS],[lm3s6965*],[1]) +RTEMS_BSPOPTS_SET([LM3S69XX_NUM_SSI_BLOCKS],[lm4f120*],[4]) RTEMS_BSPOPTS_HELP([LM3S69XX_NUM_SSI_BLOCKS],[number of SSI blocks supported by MCU]) RTEMS_BSPOPTS_SET([LM3S69XX_HAS_UDMA],[lm3s3749*],[1]) +RTEMS_BSPOPTS_SET([LM3S69XX_HAS_UDMA],[lm4f*],[1]) RTEMS_BSPOPTS_SET([LM3S69XX_HAS_UDMA],[*],[0]) RTEMS_BSPOPTS_HELP([LM3S69XX_HAS_UDMA],[defined if MCU supports UDMA]) RTEMS_BSPOPTS_SET([LM3S69XX_USE_AHB_FOR_GPIO],[lm3s3749*],[1]) +RTEMS_BSPOPTS_SET([LM3S69XX_USE_AHB_FOR_GPIO],[lm4f*],[1]) RTEMS_BSPOPTS_SET([LM3S69XX_USE_AHB_FOR_GPIO],[*],[0]) RTEMS_BSPOPTS_HELP([LM3S69XX_USE_AHB_FOR_GPIO],[use AHB apperture to access GPIO registers]) @@ -69,6 +75,9 @@ RTEMS_BSPOPTS_HELP([LM3S69XX_MCU_LM3S3749],[board has LM3S3749 MCU]) RTEMS_BSPOPTS_SET([LM3S69XX_MCU_LM3S6965],[lm3s6965*],[1]) RTEMS_BSPOPTS_HELP([LM3S69XX_MCU_LM3S6965],[board has LM3S6965 MCU]) +RTEMS_BSPOPTS_SET([LM3S69XX_MCU_LM4F120],[lm4f120*],[1]) +RTEMS_BSPOPTS_HELP([LM3S69XX_MCU_LM4F120],[board has LM4F120xxx MCU]) + RTEMS_BSP_CLEANUP_OPTIONS(0, 0) RTEMS_BSP_LINKCMDS |