diff options
Diffstat (limited to 'c/src/lib/libbsp/arm/beagle/configure.ac')
| -rw-r--r-- | c/src/lib/libbsp/arm/beagle/configure.ac | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/c/src/lib/libbsp/arm/beagle/configure.ac b/c/src/lib/libbsp/arm/beagle/configure.ac new file mode 100644 index 0000000000..df27768b6d --- /dev/null +++ b/c/src/lib/libbsp/arm/beagle/configure.ac @@ -0,0 +1,98 @@ +## +# +# @file +# +# @brief Configure script of LibBSP for the BeagleBoards. +# + +AC_PREREQ([2.68]) +AC_INIT([rtems-c-src-lib-libbsp-arm-beagle],[_RTEMS_VERSION],[rtems-bugs@rtems.com]) +AC_CONFIG_SRCDIR([bsp_specs]) +RTEMS_TOP(../../../../../..) + +RTEMS_CANONICAL_TARGET_CPU +AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.11.1]) +RTEMS_BSP_CONFIGURE + +RTEMS_PROG_CC_FOR_TARGET +RTEMS_CANONICALIZE_TOOLS +RTEMS_PROG_CCAS + +RTEMS_CHECK_NETWORKING +AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes") + +RTEMS_BSPOPTS_SET([BSP_SMALL_MEMORY],[beagle_mzx_stage_1],[1]) +RTEMS_BSPOPTS_SET([BSP_SMALL_MEMORY],[*],[]) +RTEMS_BSPOPTS_HELP([BSP_SMALL_MEMORY],[disable testsuite samples with high memory demands]) + +RTEMS_BSPOPTS_SET([BEAGLE_OSCILLATOR_MAIN],[*],[13000000U]) +RTEMS_BSPOPTS_HELP([BEAGLE_OSCILLATOR_MAIN],[main oscillator frequency in Hz]) + +RTEMS_BSPOPTS_SET([BEAGLE_OSCILLATOR_RTC],[*],[32768U]) +RTEMS_BSPOPTS_HELP([BEAGLE_OSCILLATOR_RTC],[RTC oscillator frequency in Hz]) + +RTEMS_BSPOPTS_SET([BEAGLE_PERIPH_CLK],[*],[13000000U]) +RTEMS_BSPOPTS_HELP([BEAGLE_PERIPH_CLK],[peripheral clock in Hz]) + +RTEMS_BSPOPTS_SET([BEAGLE_ETHERNET_RMII],[*],[1]) +RTEMS_BSPOPTS_HELP([BEAGLE_ETHERNET_RMII],[enable RMII for Ethernet]) + +RTEMS_BSPOPTS_SET([BEAGLE_UART_1_BAUD],[*],[]) +RTEMS_BSPOPTS_HELP([BEAGLE_UART_1_BAUD],[baud for UART 1]) + +RTEMS_BSPOPTS_SET([BEAGLE_UART_2_BAUD],[*],[]) +RTEMS_BSPOPTS_HELP([BEAGLE_UART_2_BAUD],[baud for UART 2]) + +RTEMS_BSPOPTS_SET([BEAGLE_UART_7_BAUD],[*],[]) +RTEMS_BSPOPTS_HELP([BEAGLE_UART_7_BAUD],[baud for UART 7]) + +RTEMS_BSPOPTS_SET([BEAGLE_CONFIG_U3CLK],[*],[]) +RTEMS_BSPOPTS_HELP([BEAGLE_CONFIG_U3CLK],[clock configuration for UART 3]) + +RTEMS_BSPOPTS_SET([BEAGLE_CONFIG_U4CLK],[*],[]) +RTEMS_BSPOPTS_HELP([BEAGLE_CONFIG_U4CLK],[clock configuration for UART 4]) + +RTEMS_BSPOPTS_SET([BEAGLE_CONFIG_U5CLK],[*],[0x00001386U]) +RTEMS_BSPOPTS_HELP([BEAGLE_CONFIG_U5CLK],[clock configuration for UART 5]) + +RTEMS_BSPOPTS_SET([BEAGLE_CONFIG_U6CLK],[*],[]) +RTEMS_BSPOPTS_HELP([BEAGLE_CONFIG_U6CLK],[clock configuration for UART 6]) + +RTEMS_BSPOPTS_SET([BEAGLE_CONFIG_UART_CLKMODE],[*],[0x00000200U]) +RTEMS_BSPOPTS_HELP([BEAGLE_CONFIG_UART_CLKMODE],[clock mode configuration for UARTs]) + +RTEMS_BSPOPTS_SET([BEAGLE_DISABLE_MMU],[*],[]) +RTEMS_BSPOPTS_HELP([BEAGLE_DISABLE_MMU],[disable MMU]) + +RTEMS_BSPOPTS_SET([BEAGLE_DISABLE_READ_WRITE_DATA_CACHE],[*],[]) +RTEMS_BSPOPTS_HELP([BEAGLE_DISABLE_READ_WRITE_DATA_CACHE],[disable cache for read-write data sections]) + +RTEMS_BSPOPTS_SET([BEAGLE_DISABLE_READ_ONLY_PROTECTION],[*],[]) +RTEMS_BSPOPTS_HELP([BEAGLE_DISABLE_READ_ONLY_PROTECTION],[disable MMU protection of read-only sections]) + +RTEMS_BSPOPTS_SET([BEAGLE_SCRATCH_AREA_SIZE],[beagle_mzx*],[4096]) +RTEMS_BSPOPTS_HELP([BEAGLE_SCRATCH_AREA_SIZE],[size of scratch area]) + +RTEMS_BSPOPTS_SET([BEAGLE_STOP_GPDMA],[*],[1]) +RTEMS_BSPOPTS_HELP([BEAGLE_STOP_GPDMA],[stop general purpose DMA at start-up to avoid DMA interference]) + +RTEMS_BSPOPTS_SET([BEAGLE_STOP_ETHERNET],[*],[1]) +RTEMS_BSPOPTS_HELP([BEAGLE_STOP_ETHERNET],[stop Ethernet controller at start-up to avoid DMA interference]) + +RTEMS_BSPOPTS_SET([BEAGLE_STOP_USB],[*],[1]) +RTEMS_BSPOPTS_HELP([BEAGLE_STOP_USB],[stop USB controller at start-up to avoid DMA interference]) + +RTEMS_BSPOPTS_SET([BEAGLE_ENABLE_WATCHDOG_RESET],[*],[1]) +RTEMS_BSPOPTS_HELP([BEAGLE_ENABLE_WATCHDOG_RESET],[bsp_reset() will use the watchdog to reset the chip]) + +RTEMS_BSPOPTS_SET([BSP_START_RESET_VECTOR],[*],[]) +RTEMS_BSPOPTS_HELP([BSP_START_RESET_VECTOR],[reset vector address for BSP start]) + +RTEMS_BSPOPTS_SET([TESTS_USE_PRINTK],[*],[1]) +RTEMS_BSPOPTS_HELP([TESTS_USE_PRINTK],[tests use printk() for output]) + +RTEMS_BSP_CLEANUP_OPTIONS(0, 0) +RTEMS_BSP_LINKCMDS + +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT |