diff options
Diffstat (limited to 'bsps/sh/gensh4/start/linkcmds')
| -rw-r--r-- | bsps/sh/gensh4/start/linkcmds | 193 |
1 files changed, 193 insertions, 0 deletions
diff --git a/bsps/sh/gensh4/start/linkcmds b/bsps/sh/gensh4/start/linkcmds new file mode 100644 index 0000000000..de6bb05693 --- /dev/null +++ b/bsps/sh/gensh4/start/linkcmds @@ -0,0 +1,193 @@ +/* + * This file contains GNU linker directives for an general SH4 + * board. + * + * Variations in memory size and allocation can be made by + * overriding some values with linker command-line arguments. + * + * Copyright (C) 2000 OKTET Ltd., St.-Petersburg, Russia + * Author: Victor V. Vengerov <vvv@oktet.ru> + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * + * http://www.rtems.org/license/LICENSE. + */ + + +OUTPUT_ARCH(sh) +ENTRY(_start) +STARTUP(start.o) + +/* Do we need any of these for elf? + __DYNAMIC = 0; */ + +_RamBase = DEFINED(_RamBase) ? _RamBase : 0x80000000; +_RamSize = DEFINED(_RamSize) ? _RamSize : 4M; +_HeapSize = DEFINED(_HeapSize) ? _HeapSize : 0x0; + +/* + * Area assignments: + * Area 0: Flash memory, SRAM interface + * Area 1: GDC + * Area 2: SDRAM + * Area 3-6: unused + */ +MEMORY +{ + ram : o = 0x88100000, l = 7M + rom : o = 0x80000000, l = 4M +} + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + .text : + { + _start = .; + *(.text*) + + /* + * Special FreeBSD sysctl sections. + */ + . = ALIGN (16); + ___start_set_sysctl_set = .; + *(set_sysc*); /* set_sysctl_* but name is truncated by SH-coff */ + ___stop_set_sysctl_set = ABSOLUTE(.); + *(set_doma*); /* set_domain_* but name is truncated by SH-coff */ + *(set_pseu*); /* set_pseudo_* but name is truncated by SH-coff */ + + /* .gnu.warning sections are handled specially by elf32.em. */ + *(.gnu.warning) + *(.gnu.linkonce.t*) + } > ram + .rela.dyn : + { + *(.rela.init) + *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) + *(.rela.fini) + *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) + *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) + *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) + *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) + *(.rela.ctors) + *(.rela.dtors) + *(.rela.got) + *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) + *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) + *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) + *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) + *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) + } >ram + _etext = .; + PROVIDE (etext = .); + .init . : { KEEP(*(.init)) } > ram =0 + .fini . : { KEEP(*(.fini)) } > ram =0 + .ctors . : { KEEP(*(.ctors)) } > ram =0 + .dtors . : { KEEP(*(.dtors)) } > ram =0 + .rodata : + { + *(.rodata) + *(.rodata.*) + KEEP (*(SORT(.rtemsroset.*))) + *(.gnu.linkonce.r*) + } > ram + .tdata : { + __TLS_Data_begin = .; + *(.tdata .tdata.* .gnu.linkonce.td.*) + __TLS_Data_end = .; + } > ram + .tbss : { + __TLS_BSS_begin = .; + *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) + __TLS_BSS_end = .; + } > ram + __TLS_Data_size = __TLS_Data_end - __TLS_Data_begin; + __TLS_Data_begin = __TLS_Data_size != 0 ? __TLS_Data_begin : __TLS_BSS_begin; + __TLS_Data_end = __TLS_Data_size != 0 ? __TLS_Data_end : __TLS_BSS_begin; + __TLS_BSS_size = __TLS_BSS_end - __TLS_BSS_begin; + __TLS_Size = __TLS_BSS_end - __TLS_Data_begin; + __TLS_Alignment = MAX (ALIGNOF (.tdata), ALIGNOF (.tbss)); + + /* Adjust the address for the data segment. We want to adjust up to + the same address within the page on the next page up. */ + . = ALIGN(128) + (. & (128 - 1)); + .data : + { + copy_start = .; + *(.data*) + KEEP (*(SORT(.rtemsrwset.*))) + *(.gcc_exc*) + ___EH_FRAME_BEGIN__ = .; + *(.eh_fram*) + ___EH_FRAME_END__ = .; + LONG(0); + *(.gcc_except_table*) + *(.gnu.linkonce.d*) + SORT(CONSTRUCTORS) + copy_end = .; + } > ram + .eh_frame : { *(.eh_frame) } > ram + /* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .bss : + { + __bss_start = .; + *(.dynbss) + *(.bss .bss* .gnu.linkonce.b*) + *(COMMON) + /* Align here to ensure that the .bss section occupies space up to + _end. Align after .bss to ensure correct alignment even if the + .bss section disappears because there are no input sections. */ + . = ALIGN(32 / 8); + __bss_end = .; + } > ram + + .stack . : { + . = . + 4096; + } + + . = ALIGN(16); + _WorkAreaBase = . ; + + . = ALIGN(16); + _CPU_Interrupt_stack_low = . ; + _CPU_Interrupt_stack_high = _CPU_Interrupt_stack_low + 4096 ; + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + .stack : { _stack = .; *(.stack) } + /* These must appear regardless of . */ +} |