diff options
Diffstat (limited to 'bsps/powerpc/beatnik/net/if_em/if_em.c')
| -rw-r--r-- | bsps/powerpc/beatnik/net/if_em/if_em.c | 3847 |
1 files changed, 3847 insertions, 0 deletions
diff --git a/bsps/powerpc/beatnik/net/if_em/if_em.c b/bsps/powerpc/beatnik/net/if_em/if_em.c new file mode 100644 index 0000000000..db3607a20d --- /dev/null +++ b/bsps/powerpc/beatnik/net/if_em/if_em.c @@ -0,0 +1,3847 @@ +/************************************************************************** + +Copyright (c) 2001-2005, Intel Corporation +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +***************************************************************************/ + +/*$FreeBSD: /repoman/r/ncvs/src/sys/dev/em/if_em.c,v 1.67 2005/08/03 00:18:29 rwatson Exp $*/ +#ifndef __rtems__ +#include <dev/em/if_em.h> +#else +#include <rtems.h> +#include "rtemscompat_defs.h" +#include "../porting/rtemscompat.h" +#include "if_em.h" +#include "../porting/rtemscompat1.h" +#include <inttypes.h> +#endif + +/********************************************************************* + * Set this to one to display debug statistics + *********************************************************************/ +int em_display_debug_stats = 0; + +/********************************************************************* + * Linked list of board private structures for all NICs found + *********************************************************************/ + +struct adapter *em_adapter_list = NULL; + + +/********************************************************************* + * Driver version + *********************************************************************/ + +char em_driver_version[] = "2.1.7"; + + +/********************************************************************* + * PCI Device ID Table + * + * Used by probe to select devices to load on + * Last field stores an index into em_strings + * Last entry must be all 0s + * + * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, String Index } + *********************************************************************/ + +static em_vendor_info_t em_vendor_info_array[] = +{ + /* Intel(R) PRO/1000 Network Connection */ + { 0x8086, E1000_DEV_ID_82540EM, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82540EM_LOM, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82540EP, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82540EP_LOM, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82540EP_LP, PCI_ANY_ID, PCI_ANY_ID, 0}, + + { 0x8086, E1000_DEV_ID_82541EI, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82541ER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82541ER_LOM, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82541EI_MOBILE, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82541GI, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82541GI_LF, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82541GI_MOBILE, PCI_ANY_ID, PCI_ANY_ID, 0}, + + { 0x8086, E1000_DEV_ID_82542, PCI_ANY_ID, PCI_ANY_ID, 0}, + + { 0x8086, E1000_DEV_ID_82543GC_FIBER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82543GC_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + + { 0x8086, E1000_DEV_ID_82544EI_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82544EI_FIBER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82544GC_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82544GC_LOM, PCI_ANY_ID, PCI_ANY_ID, 0}, + + { 0x8086, E1000_DEV_ID_82545EM_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82545EM_FIBER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82545GM_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82545GM_FIBER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82545GM_SERDES, PCI_ANY_ID, PCI_ANY_ID, 0}, + + { 0x8086, E1000_DEV_ID_82546EB_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82546EB_FIBER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82546EB_QUAD_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82546GB_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82546GB_FIBER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82546GB_SERDES, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82546GB_PCIE, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82546GB_QUAD_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + + { 0x8086, E1000_DEV_ID_82547EI, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82547EI_MOBILE, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82547GI, PCI_ANY_ID, PCI_ANY_ID, 0}, + + { 0x8086, E1000_DEV_ID_82573E, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82573E_IAMT, PCI_ANY_ID, PCI_ANY_ID, 0}, + + /* required last entry */ + { 0, 0, 0, 0, 0} +}; + +/********************************************************************* + * Table of branding strings for all supported NICs. + *********************************************************************/ + +static char *em_strings[] = { + "Intel(R) PRO/1000 Network Connection" +}; + +/********************************************************************* + * Function prototypes + *********************************************************************/ +static int em_probe(device_t); +static int em_attach(device_t); +#if !defined(__rtems__) || defined(DEBUG_MODULAR) +static int em_detach(device_t); +#endif +#ifndef __rtems__ +static int em_shutdown(device_t); +#endif +static void em_intr(void *); +static void em_start(struct ifnet *); +#ifndef __rtems__ +static int em_ioctl(struct ifnet *, u_long, caddr_t); +#else +static int em_ioctl(struct ifnet *, ioctl_command_t, caddr_t); +#endif +static void em_watchdog(struct ifnet *); +static void em_init(void *); +static void em_init_locked(struct adapter *); +static void em_stop(void *); +static void em_media_status(struct ifnet *, struct ifmediareq *); +#ifndef __rtems__ +static int em_media_change(struct ifnet *); +#else +static int em_media_change(struct ifnet *ifp, struct rtems_ifmedia *ifm); +#endif +static void em_identify_hardware(struct adapter *); +static int em_allocate_pci_resources(struct adapter *); +#ifndef __rtems__ +static void em_free_pci_resources(struct adapter *); +static void em_local_timer(void *); +#endif +static int em_hardware_init(struct adapter *); +static void em_setup_interface(device_t, struct adapter *); +static int em_setup_transmit_structures(struct adapter *); +static void em_initialize_transmit_unit(struct adapter *); +static int em_setup_receive_structures(struct adapter *); +static void em_initialize_receive_unit(struct adapter *); +static void em_enable_intr(struct adapter *); +static void em_disable_intr(struct adapter *); +static void em_free_transmit_structures(struct adapter *); +static void em_free_receive_structures(struct adapter *); +static void em_update_stats_counters(struct adapter *); +static void em_clean_transmit_interrupts(struct adapter *); +static int em_allocate_receive_structures(struct adapter *); +static int em_allocate_transmit_structures(struct adapter *); +static void em_process_receive_interrupts(struct adapter *, int); +#ifndef __rtems__ +static void em_receive_checksum(struct adapter *, + struct em_rx_desc *, + struct mbuf *); +static void em_transmit_checksum_setup(struct adapter *, + struct mbuf *, + u_int32_t *, + u_int32_t *); +#endif +static void em_set_promisc(struct adapter *); +static void em_disable_promisc(struct adapter *); +static void em_set_multi(struct adapter *); +static void em_print_hw_stats(struct adapter *); +static void em_print_link_status(struct adapter *); +static int em_get_buf(int i, struct adapter *, + struct mbuf *); +#ifndef __rtems__ +static void em_enable_vlans(struct adapter *); +static void em_disable_vlans(struct adapter *); +#endif +static int em_encap(struct adapter *, struct mbuf **); +#ifndef __rtems__ +static void em_smartspeed(struct adapter *); +#endif +static int em_82547_fifo_workaround(struct adapter *, int); +static void em_82547_update_fifo_head(struct adapter *, int); +static int em_82547_tx_fifo_reset(struct adapter *); +#ifndef __rtems__ +static void em_82547_move_tail(void *arg); +#endif +static void em_82547_move_tail_locked(struct adapter *); +static int em_dma_malloc(struct adapter *, bus_size_t, + struct em_dma_alloc *, int); +static void em_dma_free(struct adapter *, struct em_dma_alloc *); +#ifndef __rtems__ +static void em_print_debug_info(struct adapter *); +#endif +static int em_is_valid_ether_addr(u_int8_t *); +#ifndef __rtems__ +static int em_sysctl_stats(SYSCTL_HANDLER_ARGS); +static int em_sysctl_debug_info(SYSCTL_HANDLER_ARGS); +#endif +static u_int32_t em_fill_descriptors (u_int64_t address, + u_int32_t length, + PDESC_ARRAY desc_array); +#ifndef __rtems__ +static int em_sysctl_int_delay(SYSCTL_HANDLER_ARGS); +static void em_add_int_delay_sysctl(struct adapter *, const char *, + const char *, struct em_int_delay_info *, + int, int); +#endif + +/********************************************************************* + * FreeBSD Device Interface Entry Points + *********************************************************************/ + +#ifndef __rtems__ +static device_method_t em_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, em_probe), + DEVMETHOD(device_attach, em_attach), + DEVMETHOD(device_detach, em_detach), + DEVMETHOD(device_shutdown, em_shutdown), + {0, 0} +}; + +static driver_t em_driver = { + "em", em_methods, sizeof(struct adapter ), +}; + +static devclass_t em_devclass; +DRIVER_MODULE(em, pci, em_driver, em_devclass, 0, 0); +MODULE_DEPEND(em, pci, 1, 1, 1); +MODULE_DEPEND(em, ether, 1, 1, 1); +#else +net_drv_tbl_t METHODS = { + n_probe : em_probe, + n_attach : em_attach, +#ifdef DEBUG_MODULAR + n_detach : em_detach, +#else + n_detach: 0, +#endif + n_intr : em_intr, +}; +#endif + +/********************************************************************* + * Tunable default values. + *********************************************************************/ + +#define E1000_TICKS_TO_USECS(ticks) ((1024 * (ticks) + 500) / 1000) +#define E1000_USECS_TO_TICKS(usecs) ((1000 * (usecs) + 512) / 1024) + +#ifndef __rtems__ +static int em_tx_int_delay_dflt = E1000_TICKS_TO_USECS(EM_TIDV); +static int em_rx_int_delay_dflt = E1000_TICKS_TO_USECS(EM_RDTR); +static int em_tx_abs_int_delay_dflt = E1000_TICKS_TO_USECS(EM_TADV); +static int em_rx_abs_int_delay_dflt = E1000_TICKS_TO_USECS(EM_RADV); + +TUNABLE_INT("hw.em.tx_int_delay", &em_tx_int_delay_dflt); +TUNABLE_INT("hw.em.rx_int_delay", &em_rx_int_delay_dflt); +TUNABLE_INT("hw.em.tx_abs_int_delay", &em_tx_abs_int_delay_dflt); +TUNABLE_INT("hw.em.rx_abs_int_delay", &em_rx_abs_int_delay_dflt); +#endif + +/********************************************************************* + * Device identification routine + * + * em_probe determines if the driver should be loaded on + * adapter based on PCI vendor/device id of the adapter. + * + * return BUS_PROBE_DEFAULT on success, positive on failure + *********************************************************************/ + +static int +em_probe(device_t dev) +{ + em_vendor_info_t *ent; + + u_int16_t pci_vendor_id = 0; + u_int16_t pci_device_id = 0; + u_int16_t pci_subvendor_id = 0; + u_int16_t pci_subdevice_id = 0; + char adapter_name[60]; + + INIT_DEBUGOUT("em_probe: begin"); + + pci_vendor_id = pci_get_vendor(dev); + if (pci_vendor_id != EM_VENDOR_ID) + return(ENXIO); + + pci_device_id = pci_get_device(dev); + pci_subvendor_id = pci_get_subvendor(dev); + pci_subdevice_id = pci_get_subdevice(dev); + + ent = em_vendor_info_array; + while (ent->vendor_id != 0) { + if ((pci_vendor_id == ent->vendor_id) && + (pci_device_id == ent->device_id) && + + ((pci_subvendor_id == ent->subvendor_id) || + (ent->subvendor_id == PCI_ANY_ID)) && + + ((pci_subdevice_id == ent->subdevice_id) || + (ent->subdevice_id == PCI_ANY_ID))) { + sprintf(adapter_name, "%s, Version - %s", + em_strings[ent->index], + em_driver_version); + device_set_desc_copy(dev, adapter_name); + return(BUS_PROBE_DEFAULT); + } + ent++; + } + + return(ENXIO); +} + +/********************************************************************* + * Device initialization routine + * + * The attach entry point is called when the driver is being loaded. + * This routine identifies the type of hardware, allocates all resources + * and initializes the hardware. + * + * return 0 on success, positive on failure + *********************************************************************/ + +static int +em_attach(device_t dev) +{ + struct adapter * adapter; + int tsize, rsize; + int error = 0; + + INIT_DEBUGOUT("em_attach: begin"); + + /* Allocate, clear, and link in our adapter structure */ + if (!(adapter = device_get_softc(dev))) { + printf("em: adapter structure allocation failed\n"); + return(ENOMEM); + } +#ifndef __rtems__ + bzero(adapter, sizeof(struct adapter )); +#else + /* softc structure is maintained outside of this + * and the osdep already contains vital fields (memory address) + */ +#endif + adapter->dev = dev; + adapter->osdep.dev = dev; + adapter->unit = device_get_unit(dev); + EM_LOCK_INIT(adapter, device_get_nameunit(dev)); + + if (em_adapter_list != NULL) + em_adapter_list->prev = adapter; + adapter->next = em_adapter_list; + em_adapter_list = adapter; + +#ifndef __rtems__ + /* SYSCTL stuff */ + SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), + SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), + OID_AUTO, "debug_info", CTLTYPE_INT|CTLFLAG_RW, + (void *)adapter, 0, + em_sysctl_debug_info, "I", "Debug Information"); + + SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), + SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), + OID_AUTO, "stats", CTLTYPE_INT|CTLFLAG_RW, + (void *)adapter, 0, + em_sysctl_stats, "I", "Statistics"); +#endif + + callout_init(&adapter->timer, CALLOUT_MPSAFE); + callout_init(&adapter->tx_fifo_timer, CALLOUT_MPSAFE); + + /* Determine hardware revision */ + em_identify_hardware(adapter); + +#ifndef __rtems__ + /* Set up some sysctls for the tunable interrupt delays */ + em_add_int_delay_sysctl(adapter, "rx_int_delay", + "receive interrupt delay in usecs", &adapter->rx_int_delay, + E1000_REG_OFFSET(&adapter->hw, RDTR), em_rx_int_delay_dflt); + em_add_int_delay_sysctl(adapter, "tx_int_delay", + "transmit interrupt delay in usecs", &adapter->tx_int_delay, + E1000_REG_OFFSET(&adapter->hw, TIDV), em_tx_int_delay_dflt); + if (adapter->hw.mac_type >= em_82540) { + em_add_int_delay_sysctl(adapter, "rx_abs_int_delay", + "receive interrupt delay limit in usecs", + &adapter->rx_abs_int_delay, + E1000_REG_OFFSET(&adapter->hw, RADV), + em_rx_abs_int_delay_dflt); + em_add_int_delay_sysctl(adapter, "tx_abs_int_delay", + "transmit interrupt delay limit in usecs", + &adapter->tx_abs_int_delay, + E1000_REG_OFFSET(&adapter->hw, TADV), + em_tx_abs_int_delay_dflt); + } +#endif + + /* Parameters (to be read from user) */ + adapter->num_tx_desc = EM_MAX_TXD; + adapter->num_rx_desc = EM_MAX_RXD; +#ifdef __rtems__ + if ( dev->d_ifconfig->rbuf_count > 0 ) { + adapter->num_rx_desc = dev->d_ifconfig->rbuf_count; + } + if ( adapter->num_rx_desc < 80 ) + adapter->num_rx_desc = 80; + if ( adapter->num_rx_desc > 256 ) + adapter->num_rx_desc = 256; + if ( dev->d_ifconfig->xbuf_count > 0 ) { + adapter->num_tx_desc = dev->d_ifconfig->xbuf_count; + } + if ( adapter->num_tx_desc < 80 ) + adapter->num_tx_desc = 80; + if ( adapter->num_tx_desc > 256 ) + adapter->num_tx_desc = 256; + adapter->tx_cleanup_threshold = adapter->num_tx_desc/8; +#endif + adapter->hw.autoneg = DO_AUTO_NEG; + adapter->hw.wait_autoneg_complete = WAIT_FOR_AUTO_NEG_DEFAULT; + adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT; + adapter->hw.tbi_compatibility_en = TRUE; + adapter->rx_buffer_len = EM_RXBUFFER_2048; + + /* + * These parameters control the automatic generation(Tx) and + * response(Rx) to Ethernet PAUSE frames. + */ + adapter->hw.fc_high_water = FC_DEFAULT_HI_THRESH; + adapter->hw.fc_low_water = FC_DEFAULT_LO_THRESH; + adapter->hw.fc_pause_time = FC_DEFAULT_TX_TIMER; + adapter->hw.fc_send_xon = TRUE; + adapter->hw.fc = em_fc_full; + + adapter->hw.phy_init_script = 1; + adapter->hw.phy_reset_disable = FALSE; + +#ifndef EM_MASTER_SLAVE + adapter->hw.master_slave = em_ms_hw_default; +#else + adapter->hw.master_slave = EM_MASTER_SLAVE; +#endif + /* + * Set the max frame size assuming standard ethernet + * sized frames + */ + adapter->hw.max_frame_size = + ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN; + + adapter->hw.min_frame_size = + MINIMUM_ETHERNET_PACKET_SIZE + ETHER_CRC_LEN; + + /* + * This controls when hardware reports transmit completion + * status. + */ + adapter->hw.report_tx_early = 1; + + + if (em_allocate_pci_resources(adapter)) { + printf("em%d: Allocation of PCI resources failed\n", + adapter->unit); + error = ENXIO; + goto err_pci; + } + + + /* Initialize eeprom parameters */ + em_init_eeprom_params(&adapter->hw); + + tsize = EM_ROUNDUP(adapter->num_tx_desc * + sizeof(struct em_tx_desc), 4096); + + /* Allocate Transmit Descriptor ring */ + if (em_dma_malloc(adapter, tsize, &adapter->txdma, BUS_DMA_NOWAIT)) { + printf("em%d: Unable to allocate tx_desc memory\n", + adapter->unit); + error = ENOMEM; + goto err_tx_desc; + } + adapter->tx_desc_base = (struct em_tx_desc *) adapter->txdma.dma_vaddr; + + rsize = EM_ROUNDUP(adapter->num_rx_desc * + sizeof(struct em_rx_desc), 4096); + + /* Allocate Receive Descriptor ring */ + if (em_dma_malloc(adapter, rsize, &adapter->rxdma, BUS_DMA_NOWAIT)) { + printf("em%d: Unable to allocate rx_desc memory\n", + adapter->unit); + error = ENOMEM; + goto err_rx_desc; + } + adapter->rx_desc_base = (struct em_rx_desc *) adapter->rxdma.dma_vaddr; + + /* Initialize the hardware */ + if (em_hardware_init(adapter)) { + printf("em%d: Unable to initialize the hardware\n", + adapter->unit); + error = EIO; + goto err_hw_init; + } + + /* Copy the permanent MAC address out of the EEPROM */ + if (em_read_mac_addr(&adapter->hw) < 0) { + printf("em%d: EEPROM read error while reading mac address\n", + adapter->unit); + error = EIO; + goto err_mac_addr; + } + +#ifdef __rtems__ + /* if the configuration has not set a mac address, copy the permanent + * address from the device to the arpcom struct. + */ + { + int i; + for ( i=0; i<ETHER_ADDR_LEN; i++ ) { + if ( adapter->arpcom.ac_enaddr[i] ) + break; + } + if ( i >= ETHER_ADDR_LEN ) { + /* all nulls */ + bcopy(adapter->hw.mac_addr, adapter->arpcom.ac_enaddr, + ETHER_ADDR_LEN); + } + } +#endif + + if (!em_is_valid_ether_addr(adapter->hw.mac_addr)) { + printf("em%d: Invalid mac address\n", adapter->unit); + error = EIO; + goto err_mac_addr; + } + + /* Setup OS specific network interface */ + em_setup_interface(dev, adapter); + + /* Initialize statistics */ + em_clear_hw_cntrs(&adapter->hw); + em_update_stats_counters(adapter); + adapter->hw.get_link_status = 1; +#ifndef __rtems__ + em_check_for_link(&adapter->hw); +#else + /* first check during hw init usually fails - probably we need to wait longer; + * could take a while till the link is up, depends on the partner? + * in any case, rather than waiting here we just proceed... + */ + em_check_for_link(&adapter->hw); + /* em_check_for_link doesn't update 'link_active' + * -- they usually call em_print_link_status() right + * after check_for_link, so let's repeat this + * algorithm here. + */ + em_print_link_status(adapter); +#endif + + /* Print the link status */ + if (adapter->link_active == 1) { + em_get_speed_and_duplex(&adapter->hw, &adapter->link_speed, + &adapter->link_duplex); + printf("em%d: Speed:%d Mbps Duplex:%s\n", + adapter->unit, + adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half"); + } else + printf("em%d: Speed:N/A Duplex:N/A\n", adapter->unit); + + /* Identify 82544 on PCIX */ + em_get_bus_info(&adapter->hw); + if(adapter->hw.bus_type == em_bus_type_pcix && + adapter->hw.mac_type == em_82544) { + adapter->pcix_82544 = TRUE; + } + else { + adapter->pcix_82544 = FALSE; + } + INIT_DEBUGOUT("em_attach: end"); + return(0); + +err_mac_addr: +err_hw_init: + em_dma_free(adapter, &adapter->rxdma); +err_rx_desc: + em_dma_free(adapter, &adapter->txdma); +err_tx_desc: +err_pci: +#ifndef __rtems__ + em_free_pci_resources(adapter); +#endif + return(error); + +} + +/********************************************************************* + * Device removal routine + * + * The detach entry point is called when the driver is being removed. + * This routine stops the adapter and deallocates all the resources + * that were allocated for driver operation. + * + * return 0 on success, positive on failure + *********************************************************************/ + +#if !defined(__rtems__) || defined(DEBUG_MODULAR) + +static int +em_detach(device_t dev) +{ + struct adapter * adapter = device_get_softc(dev); + struct ifnet *ifp = &adapter->arpcom.ac_if; + + INIT_DEBUGOUT("em_detach: begin"); + + EM_LOCK(adapter); + adapter->in_detach = 1; + em_stop(adapter); + em_phy_hw_reset(&adapter->hw); + EM_UNLOCK(adapter); +#ifndef __rtems__ +#if __FreeBSD_version < 500000 + ether_ifdetach(adapter->ifp, ETHER_BPF_SUPPORTED); +#else + ether_ifdetach(adapter->ifp); + if_free(ifp); +#endif + em_free_pci_resources(adapter); + bus_generic_detach(dev); +#else + ether_ifdetach(ifp); +#endif + + /* Free Transmit Descriptor ring */ + if (adapter->tx_desc_base) { + em_dma_free(adapter, &adapter->txdma); + adapter->tx_desc_base = NULL; + } + + /* Free Receive Descriptor ring */ + if (adapter->rx_desc_base) { + em_dma_free(adapter, &adapter->rxdma); + adapter->rx_desc_base = NULL; + } + + /* Remove from the adapter list */ + if (em_adapter_list == adapter) + em_adapter_list = adapter->next; + if (adapter->next != NULL) + adapter->next->prev = adapter->prev; + if (adapter->prev != NULL) + adapter->prev->next = adapter->next; + + EM_LOCK_DESTROY(adapter); + + ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); + ifp->if_timer = 0; + + return(0); +} + +#endif + +#ifndef __rtems__ +/********************************************************************* + * + * Shutdown entry point + * + **********************************************************************/ + +static int +em_shutdown(device_t dev) +{ + struct adapter *adapter = device_get_softc(dev); + EM_LOCK(adapter); + em_stop(adapter); + EM_UNLOCK(adapter); + return(0); +} +#endif + +/********************************************************************* + * Transmit entry point + * + * em_start is called by the stack to initiate a transmit. + * The driver will remain in this routine as long as there are + * packets to transmit and transmit resources are available. + * In case resources are not available stack is notified and + * the packet is requeued. + **********************************************************************/ + +static void +em_start_locked(struct ifnet *ifp) +{ + struct mbuf *m_head; + struct adapter *adapter = ifp->if_softc; + + mtx_assert(&adapter->mtx, MA_OWNED); + + if (!adapter->link_active) + return; + + while (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) { + + IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); + + if (m_head == NULL) break; + + /* + * em_encap() can modify our pointer, and or make it NULL on + * failure. In that event, we can't requeue. + */ + if (em_encap(adapter, &m_head)) { + if (m_head == NULL) + break; + ifp->if_flags |= IFF_OACTIVE; + IFQ_DRV_PREPEND(&ifp->if_snd, m_head); + break; + } + + /* Send a copy of the frame to the BPF listener */ +#if __FreeBSD_version < 500000 && !defined(__rtems__) + if (ifp->if_bpf) + bpf_mtap(ifp, m_head); +#else + BPF_MTAP(ifp, m_head); +#endif + + /* Set timeout in case hardware has problems transmitting */ + ifp->if_timer = EM_TX_TIMEOUT; + + } + return; +} + +static void +em_start(struct ifnet *ifp) +{ + struct adapter *adapter RTEMS_UNUSED = ifp->if_softc; + + EM_LOCK(adapter); + em_start_locked(ifp); + EM_UNLOCK(adapter); + return; +} + +/********************************************************************* + * Ioctl entry point + * + * em_ioctl is called when the user wants to configure the + * interface. + * + * return 0 on success, positive on failure + **********************************************************************/ + +#ifndef __rtems__ +static int +em_ioctl(struct ifnet *ifp, u_long command, caddr_t data) +#else +static int +em_ioctl(struct ifnet *ifp, ioctl_command_t command, caddr_t data) +#endif +{ +#ifndef __rtems__ + int mask, reinit, error = 0; +#else + int error = 0; +#endif + struct ifreq *ifr = (struct ifreq *) data; + struct adapter * adapter = ifp->if_softc; + + if (adapter->in_detach) return(error); + + switch (command) { + case SIOCSIFADDR: + case SIOCGIFADDR: + IOCTL_DEBUGOUT("ioctl rcv'd: SIOCxIFADDR (Get/Set Interface Addr)"); + ether_ioctl(ifp, command, data); + break; + case SIOCSIFMTU: + IOCTL_DEBUGOUT("ioctl rcv'd: SIOCSIFMTU (Set Interface MTU)"); + if (ifr->ifr_mtu > MAX_JUMBO_FRAME_SIZE - ETHER_HDR_LEN || \ + /* 82573 does not support jumbo frames */ + (adapter->hw.mac_type == em_82573 && ifr->ifr_mtu > ETHERMTU) ) { + error = EINVAL; + } else { + EM_LOCK(adapter); + ifp->if_mtu = ifr->ifr_mtu; + adapter->hw.max_frame_size = + ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN; + em_init_locked(adapter); + EM_UNLOCK(adapter); + } + break; + case SIOCSIFFLAGS: + IOCTL_DEBUGOUT("ioctl rcv'd: SIOCSIFFLAGS (Set Interface Flags)"); + EM_LOCK(adapter); + if (ifp->if_flags & IFF_UP) { + if (!(ifp->if_flags & IFF_RUNNING)) { + em_init_locked(adapter); + } + + em_disable_promisc(adapter); + em_set_promisc(adapter); + } else { + if (ifp->if_flags & IFF_RUNNING) { + em_stop(adapter); + } + } + EM_UNLOCK(adapter); + break; + case SIOCADDMULTI: + case SIOCDELMULTI: +#ifdef __rtems__ + if ( (error = ( SIOCADDMULTI == command ? + ether_addmulti( ifr, (struct arpcom*)ifp ) : + ether_delmulti( ifr, (struct arpcom*)ifp ) ) ) ) { + if ( ENETRESET == error ) + error = 0; + else + break; + } +#endif + IOCTL_DEBUGOUT("ioctl rcv'd: SIOC(ADD|DEL)MULTI"); + if (ifp->if_flags & IFF_RUNNING) { + EM_LOCK(adapter); + em_disable_intr(adapter); + em_set_multi(adapter); + if (adapter->hw.mac_type == em_82542_rev2_0) { + em_initialize_receive_unit(adapter); + } +#ifdef DEVICE_POLLING + if (!(ifp->if_flags & IFF_POLLING)) +#endif + em_enable_intr(adapter); + EM_UNLOCK(adapter); + } + break; +#ifndef __rtems__ + case SIOCSIFMEDIA: + case SIOCGIFMEDIA: + IOCTL_DEBUGOUT("ioctl rcv'd: SIOCxIFMEDIA (Get/Set Interface Media)"); + error = ifmedia_ioctl(ifp, ifr, &adapter->media, command); + break; +#else + case SIOCSIFMEDIA: + { + struct rtems_ifmedia mhack; + mhack.ifm_media = ifr->ifr_media; + error = em_media_change(ifp, &mhack); + } + break; + case SIOCGIFMEDIA: + { + struct ifmediareq ifmr; + em_media_status(ifp, &ifmr); + ifr->ifr_media = ifmr.ifm_active; + /* add-in rtems flags */ + if ( adapter->link_active ) + ifr->ifr_media |= IFM_LINK_OK; + if ( !adapter->hw.autoneg ) + ifr->ifr_media |= IFM_ANEG_DIS; + error = 0; + } + break; +#endif +#ifndef __rtems__ + case SIOCSIFCAP: + IOCTL_DEBUGOUT("ioctl rcv'd: SIOCSIFCAP (Set Capabilities)"); + reinit = 0; + mask = ifr->ifr_reqcap ^ ifp->if_capenable; + if (mask & IFCAP_POLLING) + ifp->if_capenable ^= IFCAP_POLLING; + if (mask & IFCAP_HWCSUM) { + ifp->if_capenable ^= IFCAP_HWCSUM; + reinit = 1; + } + if (mask & IFCAP_VLAN_HWTAGGING) { + ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING; + reinit = 1; + } + if (reinit && (ifp->if_flags & IFF_RUNNING)) + em_init(adapter); + break; +#endif + +#ifdef __rtems__ + case SIO_RTEMS_SHOW_STATS: + em_print_hw_stats(adapter); + error = 0; + break; +#endif + + default: + IOCTL_DEBUGOUT1("ioctl received: UNKNOWN (0x%x)", (int)command); + error = EINVAL; + } + + return(error); +} + +/********************************************************************* + * Watchdog entry point + * + * This routine is called whenever hardware quits transmitting. + * + **********************************************************************/ + +static void +em_watchdog(struct ifnet *ifp) +{ + struct adapter * adapter; + adapter = ifp->if_softc; + + /* If we are in this routine because of pause frames, then + * don't reset the hardware. + */ + if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_TXOFF) { + ifp->if_timer = EM_TX_TIMEOUT; + return; + } + + if (em_check_for_link(&adapter->hw)) + printf("em%d: watchdog timeout -- resetting\n", adapter->unit); + + ifp->if_flags &= ~IFF_RUNNING; + + em_init(adapter); + + ifp->if_oerrors++; + return; +} + +/********************************************************************* + * Init entry point + * + * This routine is used in two ways. It is used by the stack as + * init entry point in network interface structure. It is also used + * by the driver as a hw/sw initialization routine to get to a + * consistent state. + * + * return 0 on success, positive on failure + **********************************************************************/ + +static void +em_init_locked(struct adapter * adapter) +{ + struct ifnet *ifp; + + uint32_t pba; + ifp = &adapter->arpcom.ac_if; + + INIT_DEBUGOUT("em_init: begin"); + + mtx_assert(&adapter->mtx, MA_OWNED); + + em_stop(adapter); + + /* Packet Buffer Allocation (PBA) + * Writing PBA sets the receive portion of the buffer + * the remainder is used for the transmit buffer. + * + * Devices before the 82547 had a Packet Buffer of 64K. + * Default allocation: PBA=48K for Rx, leaving 16K for Tx. + * After the 82547 the buffer was reduced to 40K. + * Default allocation: PBA=30K for Rx, leaving 10K for Tx. + * Note: default does not leave enough room for Jumbo Frame >10k. + */ + if(adapter->hw.mac_type < em_82547) { + /* Total FIFO is 64K */ + if(adapter->rx_buffer_len > EM_RXBUFFER_8192) + pba = E1000_PBA_40K; /* 40K for Rx, 24K for Tx */ + else + pba = E1000_PBA_48K; /* 48K for Rx, 16K for Tx */ + } else { + /* Total FIFO is 40K */ + if(adapter->hw.max_frame_size > EM_RXBUFFER_8192) { + pba = E1000_PBA_22K; /* 22K for Rx, 18K for Tx */ + } else { + pba = E1000_PBA_30K; /* 30K for Rx, 10K for Tx */ + } + adapter->tx_fifo_head = 0; + adapter->tx_head_addr = pba << EM_TX_HEAD_ADDR_SHIFT; + adapter->tx_fifo_size = (E1000_PBA_40K - pba) << EM_PBA_BYTES_SHIFT; + } + INIT_DEBUGOUT1("em_init: pba=%" PRId32 "K",pba); + E1000_WRITE_REG(&adapter->hw, PBA, pba); + + /* Get the latest mac address, User can use a LAA */ + bcopy(adapter->arpcom.ac_enaddr, adapter->hw.mac_addr, + ETHER_ADDR_LEN); + + /* Initialize the hardware */ + if (em_hardware_init(adapter)) { + printf("em%d: Unable to initialize the hardware\n", + adapter->unit); + return; + } + +#ifndef __rtems__ + if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) + em_enable_vlans(adapter); +#endif + + /* Prepare transmit descriptors and buffers */ + if (em_setup_transmit_structures(adapter)) { + printf("em%d: Could not setup transmit structures\n", + adapter->unit); + em_stop(adapter); + return; + } + em_initialize_transmit_unit(adapter); + + /* Setup Multicast table */ + em_set_multi(adapter); + + /* Prepare receive descriptors and buffers */ + if (em_setup_receive_structures(adapter)) { + printf("em%d: Could not setup receive structures\n", + adapter->unit); + em_stop(adapter); + return; + } + em_initialize_receive_unit(adapter); + + /* Don't loose promiscuous settings */ + em_set_promisc(adapter); + + ifp->if_flags |= IFF_RUNNING; + ifp->if_flags &= ~IFF_OACTIVE; + +#ifndef __rtems__ + if (adapter->hw.mac_type >= em_82543) { + if (ifp->if_capenable & IFCAP_TXCSUM) + ifp->if_hwassist = EM_CHECKSUM_FEATURES; + else + ifp->if_hwassist = 0; + } +#endif + + callout_reset(&adapter->timer, hz, em_local_timer, adapter); + em_clear_hw_cntrs(&adapter->hw); +#ifdef DEVICE_POLLING + /* + * Only enable interrupts if we are not polling, make sure + * they are off otherwise. + */ + if (ifp->if_flags & IFF_POLLING) + em_disable_intr(adapter); + else +#endif /* DEVICE_POLLING */ + em_enable_intr(adapter); + + /* Don't reset the phy next time init gets called */ + adapter->hw.phy_reset_disable = TRUE; + + return; +} + +static void +em_init(void *arg) +{ + struct adapter * adapter = arg; + + EM_LOCK(adapter); + em_init_locked(adapter); + EM_UNLOCK(adapter); + return; +} + + +#ifdef DEVICE_POLLING +static poll_handler_t em_poll; + +static void +em_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count) +{ + struct adapter *adapter = ifp->if_softc; + u_int32_t reg_icr; + + mtx_assert(&adapter->mtx, MA_OWNED); + + if (!(ifp->if_capenable & IFCAP_POLLING)) { + ether_poll_deregister(ifp); + cmd = POLL_DEREGISTER; + } + if (cmd == POLL_DEREGISTER) { /* final call, enable interrupts */ + em_enable_intr(adapter); + return; + } + if (cmd == POLL_AND_CHECK_STATUS) { + reg_icr = E1000_READ_REG(&adapter->hw, ICR); + if (reg_icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { + callout_stop(&adapter->timer); + adapter->hw.get_link_status = 1; + em_check_for_link(&adapter->hw); + em_print_link_status(adapter); + callout_reset(&adapter->timer, hz, em_local_timer, adapter); + } + } + if (ifp->if_flags & IFF_RUNNING) { + em_process_receive_interrupts(adapter, count); + em_clean_transmit_interrupts(adapter); + } + + if (ifp->if_flags & IFF_RUNNING && !IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + em_start_locked(ifp); +} + +static void +em_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) +{ + struct adapter *adapter = ifp->if_softc; + + EM_LOCK(adapter); + em_poll_locked(ifp, cmd, count); + EM_UNLOCK(adapter); +} +#endif /* DEVICE_POLLING */ + +/********************************************************************* + * + * Interrupt Service routine + * + **********************************************************************/ +static void +em_intr(void *arg) +{ + u_int32_t loop_cnt = EM_MAX_INTR; + u_int32_t reg_icr; + struct ifnet *ifp; + struct adapter *adapter = arg; + + EM_LOCK(adapter); + + ifp = &adapter->arpcom.ac_if; + +#ifdef DEVICE_POLLING + if (ifp->if_flags & IFF_POLLING) { + EM_UNLOCK(adapter); + return; + } + + if ((ifp->if_capenable & IFCAP_POLLING) && + ether_poll_register(em_poll, ifp)) { + em_disable_intr(adapter); + em_poll_locked(ifp, 0, 1); + EM_UNLOCK(adapter); + return; + } +#endif /* DEVICE_POLLING */ + + reg_icr = E1000_READ_REG(&adapter->hw, ICR); + if (!reg_icr) { + EM_UNLOCK(adapter); + return; + } + + /* Link status change */ + if (reg_icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { + callout_stop(&adapter->timer); + adapter->hw.get_link_status = 1; + em_check_for_link(&adapter->hw); + em_print_link_status(adapter); + callout_reset(&adapter->timer, hz, em_local_timer, adapter); + } + + while (loop_cnt > 0) { + if (ifp->if_flags & IFF_RUNNING) { + em_process_receive_interrupts(adapter, -1); + em_clean_transmit_interrupts(adapter); + } + loop_cnt--; + } + + if (ifp->if_flags & IFF_RUNNING && !IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + em_start_locked(ifp); + + EM_UNLOCK(adapter); + return; +} + + + +/********************************************************************* + * + * Media Ioctl callback + * + * This routine is called whenever the user queries the status of + * the interface using ifconfig. + * + **********************************************************************/ +static void +em_media_status(struct ifnet *ifp, struct ifmediareq *ifmr) +{ + struct adapter * adapter = ifp->if_softc; + + INIT_DEBUGOUT("em_media_status: begin"); + + em_check_for_link(&adapter->hw); + if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU) { + if (adapter->link_active == 0) { + em_get_speed_and_duplex(&adapter->hw, + &adapter->link_speed, + &adapter->link_duplex); + adapter->link_active = 1; + } + } else { + if (adapter->link_active == 1) { + adapter->link_speed = 0; + adapter->link_duplex = 0; + adapter->link_active = 0; + } + } + + ifmr->ifm_status = IFM_AVALID; + ifmr->ifm_active = IFM_ETHER; + + if (!adapter->link_active) + return; + + ifmr->ifm_status |= IFM_ACTIVE; + + if (adapter->hw.media_type == em_media_type_fiber) { + ifmr->ifm_active |= IFM_1000_SX | IFM_FDX; + } else { + switch (adapter->link_speed) { + case 10: + ifmr->ifm_active |= IFM_10_T; + break; + case 100: + ifmr->ifm_active |= IFM_100_TX; + break; + case 1000: +#if __FreeBSD_version < 500000 && !defined(__rtems__) + ifmr->ifm_active |= IFM_1000_TX; +#else + ifmr->ifm_active |= IFM_1000_T; +#endif + break; + } + if (adapter->link_duplex == FULL_DUPLEX) + ifmr->ifm_active |= IFM_FDX; + else + ifmr->ifm_active |= IFM_HDX; + } + return; +} + +/********************************************************************* + * + * Media Ioctl callback + * + * This routine is called when the user changes speed/duplex using + * media/mediopt option with ifconfig. + * + **********************************************************************/ +static int +#ifndef __rtems__ +em_media_change(struct ifnet *ifp) +#else +em_media_change(struct ifnet *ifp, struct rtems_ifmedia *ifm) +#endif +{ + struct adapter * adapter = ifp->if_softc; +#ifndef __rtems__ + struct ifmedia *ifm = &adapter->media; +#endif + + INIT_DEBUGOUT("em_media_change: begin"); + + if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) + return(EINVAL); + + switch (IFM_SUBTYPE(ifm->ifm_media)) { + case IFM_AUTO: + adapter->hw.autoneg = DO_AUTO_NEG; + adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT; + break; + case IFM_1000_SX: +#if __FreeBSD_version < 500000 && !defined(__rtems__) + case IFM_1000_TX: +#else + case IFM_1000_T: +#endif + adapter->hw.autoneg = DO_AUTO_NEG; + adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL; + break; + case IFM_100_TX: + adapter->hw.autoneg = FALSE; + adapter->hw.autoneg_advertised = 0; + if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) + adapter->hw.forced_speed_duplex = em_100_full; + else + adapter->hw.forced_speed_duplex = em_100_half; + break; + case IFM_10_T: + adapter->hw.autoneg = FALSE; + adapter->hw.autoneg_advertised = 0; + if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) + adapter->hw.forced_speed_duplex = em_10_full; + else + adapter->hw.forced_speed_duplex = em_10_half; + break; + default: + printf("em%d: Unsupported media type\n", adapter->unit); + } + + /* As the speed/duplex settings my have changed we need to + * reset the PHY. + */ + adapter->hw.phy_reset_disable = FALSE; + + em_init(adapter); + + return(0); +} + +/********************************************************************* + * + * This routine maps the mbufs to tx descriptors. + * + * return 0 on success, positive on failure + **********************************************************************/ +static int +em_encap(struct adapter *adapter, struct mbuf **m_headp) +{ + u_int32_t txd_upper; + u_int32_t txd_lower, txd_used = 0, txd_saved = 0; + int i, j, error; + u_int64_t address; + + struct mbuf *m_head; + + /* For 82544 Workaround */ + DESC_ARRAY desc_array; + u_int32_t array_elements; + u_int32_t counter; + +#ifndef __rtems__ +#if __FreeBSD_version < 500000 + struct ifvlan *ifv = NULL; +#else + struct m_tag *mtag; +#endif +#endif + bus_dma_segment_t segs[EM_MAX_SCATTER]; +#ifndef __rtems__ + bus_dmamap_t map; +#endif + int nsegs; + struct em_buffer *tx_buffer = NULL; + struct em_tx_desc *current_tx_desc = NULL; +#ifndef __rtems__ + struct ifnet *ifp = &adapter->arpcom.ac_if; +#endif + + m_head = *m_headp; + + /* + * Force a cleanup if number of TX descriptors + * available hits the threshold + */ + if (adapter->num_tx_desc_avail <= EM_TX_CLEANUP_THRESHOLD) { + em_clean_transmit_interrupts(adapter); + if (adapter->num_tx_desc_avail <= EM_TX_CLEANUP_THRESHOLD) { + adapter->no_tx_desc_avail1++; + return(ENOBUFS); + } + } + +#ifndef __rtems__ + /* + * Map the packet for DMA. + */ + if (bus_dmamap_create(adapter->txtag, BUS_DMA_NOWAIT, &map)) { + adapter->no_tx_map_avail++; + return (ENOMEM); + } + error = bus_dmamap_load_mbuf_sg(adapter->txtag, map, m_head, segs, + &nsegs, BUS_DMA_NOWAIT); + if (error != 0) { + adapter->no_tx_dma_setup++; + bus_dmamap_destroy(adapter->txtag, map); + return (error); + } +#else + (void)error; + { + struct mbuf *m; + for ( m=m_head, nsegs=0; m; m=m->m_next, nsegs++ ) { + if ( nsegs >= sizeof(segs)/sizeof(segs[0]) ) { + break; + } + segs[nsegs].ds_addr = mtod(m, unsigned); + segs[nsegs].ds_len = m->m_len; + } + } +#endif + KASSERT(nsegs != 0, ("em_encap: empty packet")); + + if (nsegs > adapter->num_tx_desc_avail) { + adapter->no_tx_desc_avail2++; + bus_dmamap_destroy(adapter->txtag, map); + return (ENOBUFS); + } + + +#ifndef __rtems__ + if (ifp->if_hwassist > 0) { + em_transmit_checksum_setup(adapter, m_head, + &txd_upper, &txd_lower); + } else +#endif + txd_upper = txd_lower = 0; + + +#ifndef __rtems__ + /* Find out if we are in vlan mode */ +#if __FreeBSD_version < 500000 + if ((m_head->m_flags & (M_PROTO1|M_PKTHDR)) == (M_PROTO1|M_PKTHDR) && + m_head->m_pkthdr.rcvif != NULL && + m_head->m_pkthdr.rcvif->if_type == IFT_L2VLAN) + ifv = m_head->m_pkthdr.rcvif->if_softc; +#else + mtag = VLAN_OUTPUT_TAG(ifp, m_head); +#endif + + /* + * When operating in promiscuous mode, hardware encapsulation for + * packets is disabled. This means we have to add the vlan + * encapsulation in the driver, since it will have come down from the + * VLAN layer with a tag instead of a VLAN header. + */ + if (mtag != NULL && adapter->em_insert_vlan_header) { + struct ether_vlan_header *evl; + struct ether_header eh; + + m_head = m_pullup(m_head, sizeof(eh)); + if (m_head == NULL) { + *m_headp = NULL; + bus_dmamap_destroy(adapter->txtag, map); + return (ENOBUFS); + } + eh = *mtod(m_head, struct ether_header *); + M_PREPEND(m_head, sizeof(*evl), M_DONTWAIT); + if (m_head == NULL) { + *m_headp = NULL; + bus_dmamap_destroy(adapter->txtag, map); + return (ENOBUFS); + } + m_head = m_pullup(m_head, sizeof(*evl)); + if (m_head == NULL) { + *m_headp = NULL; + bus_dmamap_destroy(adapter->txtag, map); + return (ENOBUFS); + } + evl = mtod(m_head, struct ether_vlan_header *); + bcopy(&eh, evl, sizeof(*evl)); + evl->evl_proto = evl->evl_encap_proto; + evl->evl_encap_proto = htons(ETHERTYPE_VLAN); + evl->evl_tag = htons(VLAN_TAG_VALUE(mtag)); + m_tag_delete(m_head, mtag); + mtag = NULL; + *m_headp = m_head; + } +#endif + + i = adapter->next_avail_tx_desc; + if (adapter->pcix_82544) { + txd_saved = i; + txd_used = 0; + } + for (j = 0; j < nsegs; j++) { + /* If adapter is 82544 and on PCIX bus */ + if(adapter->pcix_82544) { + array_elements = 0; + address = htole64(segs[j].ds_addr); + /* + * Check the Address and Length combination and + * split the data accordingly + */ + array_elements = em_fill_descriptors(address, + htole32(segs[j].ds_len), + &desc_array); + for (counter = 0; counter < array_elements; counter++) { + if (txd_used == adapter->num_tx_desc_avail) { + adapter->next_avail_tx_desc = txd_saved; + adapter->no_tx_desc_avail2++; + bus_dmamap_destroy(adapter->txtag, map); + return (ENOBUFS); + } + tx_buffer = &adapter->tx_buffer_area[i]; + current_tx_desc = &adapter->tx_desc_base[i]; + current_tx_desc->buffer_addr = htole64( + desc_array.descriptor[counter].address); + current_tx_desc->lower.data = htole32( + (adapter->txd_cmd | txd_lower | + (u_int16_t)desc_array.descriptor[counter].length)); + current_tx_desc->upper.data = htole32((txd_upper)); + if (++i == adapter->num_tx_desc) + i = 0; + + tx_buffer->m_head = NULL; + txd_used++; + } + } else { + tx_buffer = &adapter->tx_buffer_area[i]; + current_tx_desc = &adapter->tx_desc_base[i]; + + current_tx_desc->buffer_addr = htole64(segs[j].ds_addr); + current_tx_desc->lower.data = htole32( + adapter->txd_cmd | txd_lower | segs[j].ds_len); + current_tx_desc->upper.data = htole32(txd_upper); + + if (++i == adapter->num_tx_desc) + i = 0; + + tx_buffer->m_head = NULL; + } + } + + adapter->next_avail_tx_desc = i; + if (adapter->pcix_82544) { + adapter->num_tx_desc_avail -= txd_used; + } + else { + adapter->num_tx_desc_avail -= nsegs; + } + +#ifndef __rtems__ +#if __FreeBSD_version < 500000 + if (ifv != NULL) { + /* Set the vlan id */ + current_tx_desc->upper.fields.special = htole16(ifv->ifv_tag); +#else + if (mtag != NULL) { + /* Set the vlan id */ + current_tx_desc->upper.fields.special = htole16(VLAN_TAG_VALUE(mtag)); +#endif + + /* Tell hardware to add tag */ + current_tx_desc->lower.data |= htole32(E1000_TXD_CMD_VLE); + } +#endif + + tx_buffer->m_head = m_head; +#ifndef __rtems__ + tx_buffer->map = map; +#endif + bus_dmamap_sync(adapter->txtag, map, BUS_DMASYNC_PREWRITE); + + /* + * Last Descriptor of Packet needs End Of Packet (EOP) + */ + current_tx_desc->lower.data |= htole32(E1000_TXD_CMD_EOP); + + /* + * Advance the Transmit Descriptor Tail (Tdt), this tells the E1000 + * that this frame is available to transmit. + */ + bus_dmamap_sync(adapter->txdma.dma_tag, adapter->txdma.dma_map, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + if (adapter->hw.mac_type == em_82547 && + adapter->link_duplex == HALF_DUPLEX) { + em_82547_move_tail_locked(adapter); + } else { + E1000_WRITE_REG(&adapter->hw, TDT, i); + if (adapter->hw.mac_type == em_82547) { + em_82547_update_fifo_head(adapter, m_head->m_pkthdr.len); + } + } + + return(0); +} + +/********************************************************************* + * + * 82547 workaround to avoid controller hang in half-duplex environment. + * The workaround is to avoid queuing a large packet that would span + * the internal Tx FIFO ring boundary. We need to reset the FIFO pointers + * in this case. We do that only when FIFO is quiescent. + * + **********************************************************************/ +static void +em_82547_move_tail_locked(struct adapter *adapter) +{ + uint16_t hw_tdt; + uint16_t sw_tdt; + struct em_tx_desc *tx_desc; + uint16_t length = 0; + boolean_t eop = 0; + + EM_LOCK_ASSERT(adapter); + + hw_tdt = E1000_READ_REG(&adapter->hw, TDT); + sw_tdt = adapter->next_avail_tx_desc; + + while (hw_tdt != sw_tdt) { + tx_desc = &adapter->tx_desc_base[hw_tdt]; + length += tx_desc->lower.flags.length; + eop = tx_desc->lower.data & E1000_TXD_CMD_EOP; + if(++hw_tdt == adapter->num_tx_desc) + hw_tdt = 0; + + if(eop) { + if (em_82547_fifo_workaround(adapter, length)) { + adapter->tx_fifo_wrk_cnt++; + callout_reset(&adapter->tx_fifo_timer, 1, + em_82547_move_tail, adapter); + break; + } + E1000_WRITE_REG(&adapter->hw, TDT, hw_tdt); + em_82547_update_fifo_head(adapter, length); + length = 0; + } + } + return; +} + +#ifndef __rtems__ +static void +em_82547_move_tail(void *arg) +{ + struct adapter *adapter = arg; + + EM_LOCK(adapter); + em_82547_move_tail_locked(adapter); + EM_UNLOCK(adapter); +} +#endif + +static int +em_82547_fifo_workaround(struct adapter *adapter, int len) +{ + int fifo_space, fifo_pkt_len; + + fifo_pkt_len = EM_ROUNDUP(len + EM_FIFO_HDR, EM_FIFO_HDR); + + if (adapter->link_duplex == HALF_DUPLEX) { + fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head; + + if (fifo_pkt_len >= (EM_82547_PKT_THRESH + fifo_space)) { + if (em_82547_tx_fifo_reset(adapter)) { + return(0); + } + else { + return(1); + } + } + } + + return(0); +} + +static void +em_82547_update_fifo_head(struct adapter *adapter, int len) +{ + int fifo_pkt_len = EM_ROUNDUP(len + EM_FIFO_HDR, EM_FIFO_HDR); + + /* tx_fifo_head is always 16 byte aligned */ + adapter->tx_fifo_head += fifo_pkt_len; + if (adapter->tx_fifo_head >= adapter->tx_fifo_size) { + adapter->tx_fifo_head -= adapter->tx_fifo_size; + } + + return; +} + + +static int +em_82547_tx_fifo_reset(struct adapter *adapter) +{ + uint32_t tctl; + + if ( (E1000_READ_REG(&adapter->hw, TDT) == + E1000_READ_REG(&adapter->hw, TDH)) && + (E1000_READ_REG(&adapter->hw, TDFT) == + E1000_READ_REG(&adapter->hw, TDFH)) && + (E1000_READ_REG(&adapter->hw, TDFTS) == + E1000_READ_REG(&adapter->hw, TDFHS)) && + (E1000_READ_REG(&adapter->hw, TDFPC) == 0)) { + + /* Disable TX unit */ + tctl = E1000_READ_REG(&adapter->hw, TCTL); + E1000_WRITE_REG(&adapter->hw, TCTL, tctl & ~E1000_TCTL_EN); + + /* Reset FIFO pointers */ + E1000_WRITE_REG(&adapter->hw, TDFT, adapter->tx_head_addr); + E1000_WRITE_REG(&adapter->hw, TDFH, adapter->tx_head_addr); + E1000_WRITE_REG(&adapter->hw, TDFTS, adapter->tx_head_addr); + E1000_WRITE_REG(&adapter->hw, TDFHS, adapter->tx_head_addr); + + /* Re-enable TX unit */ + E1000_WRITE_REG(&adapter->hw, TCTL, tctl); + E1000_WRITE_FLUSH(&adapter->hw); + + adapter->tx_fifo_head = 0; + adapter->tx_fifo_reset_cnt++; + + return(TRUE); + } + else { + return(FALSE); + } +} + +static void +em_set_promisc(struct adapter * adapter) +{ + + u_int32_t reg_rctl; + struct ifnet *ifp = &adapter->arpcom.ac_if; + + reg_rctl = E1000_READ_REG(&adapter->hw, RCTL); + + if (ifp->if_flags & IFF_PROMISC) { + reg_rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); + E1000_WRITE_REG(&adapter->hw, RCTL, reg_rctl); +#ifndef __rtems__ + /* Disable VLAN stripping in promiscous mode + * This enables bridging of vlan tagged frames to occur + * and also allows vlan tags to be seen in tcpdump + */ + if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) + em_disable_vlans(adapter); + adapter->em_insert_vlan_header = 1; +#endif + } else if (ifp->if_flags & IFF_ALLMULTI) { + reg_rctl |= E1000_RCTL_MPE; + reg_rctl &= ~E1000_RCTL_UPE; + E1000_WRITE_REG(&adapter->hw, RCTL, reg_rctl); +#ifndef __rtems__ + adapter->em_insert_vlan_header = 0; + } else + adapter->em_insert_vlan_header = 0; +#else + } +#endif + + return; +} + +static void +em_disable_promisc(struct adapter * adapter) +{ + u_int32_t reg_rctl; +#ifndef __rtems__ + struct ifnet *ifp = adapter->ifp; +#endif + + reg_rctl = E1000_READ_REG(&adapter->hw, RCTL); + + reg_rctl &= (~E1000_RCTL_UPE); + reg_rctl &= (~E1000_RCTL_MPE); + E1000_WRITE_REG(&adapter->hw, RCTL, reg_rctl); + +#ifndef __rtems__ + if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) + em_enable_vlans(adapter); + adapter->em_insert_vlan_header = 0; +#endif + + return; +} + + +/********************************************************************* + * Multicast Update + * + * This routine is called whenever multicast address list is updated. + * + **********************************************************************/ + +static void +em_set_multi(struct adapter * adapter) +{ + u_int32_t reg_rctl = 0; + u_int8_t mta[MAX_NUM_MULTICAST_ADDRESSES * ETH_LENGTH_OF_ADDRESS]; +#ifndef __rtems__ + struct ifmultiaddr *ifma; +#endif + int mcnt = 0; + struct ifnet *ifp = &adapter->arpcom.ac_if; + + IOCTL_DEBUGOUT("em_set_multi: begin"); + + if (adapter->hw.mac_type == em_82542_rev2_0) { + reg_rctl = E1000_READ_REG(&adapter->hw, RCTL); + if (adapter->hw.pci_cmd_word & CMD_MEM_WRT_INVALIDATE) { + em_pci_clear_mwi(&adapter->hw); + } + reg_rctl |= E1000_RCTL_RST; + E1000_WRITE_REG(&adapter->hw, RCTL, reg_rctl); + msec_delay(5); + } + +#ifndef __rtems__ + IF_ADDR_LOCK(ifp); +#if __FreeBSD_version < 500000 + LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { +#else + TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { +#endif + if (ifma->ifma_addr->sa_family != AF_LINK) + continue; + + if (mcnt == MAX_NUM_MULTICAST_ADDRESSES) break; + + bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr), + &mta[mcnt*ETH_LENGTH_OF_ADDRESS], ETH_LENGTH_OF_ADDRESS); + mcnt++; + } + IF_ADDR_UNLOCK(ifp); +#else + { + /* Don't know how to handle address ranges - we warn and ignore + * for now... + */ + struct ether_multi *enm; + struct ether_multistep step; + + ETHER_FIRST_MULTI(step, (struct arpcom*)ifp, enm); + while ( enm != NULL ) { + if ( mcnt == MAX_NUM_MULTICAST_ADDRESSES ) + break; + if ( memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN) ) { + printk("if_em: Unable to handle multicast wildcard (not ported yet); skipping/ignoring\n"); + goto skiptonext; + } else { + bcopy(enm->enm_addrlo, &mta[mcnt * ETHER_ADDR_LEN], ETHER_ADDR_LEN); + } + mcnt++; +skiptonext: + ETHER_NEXT_MULTI( step, enm ); + } + } +#endif + + if (mcnt >= MAX_NUM_MULTICAST_ADDRESSES) { + reg_rctl = E1000_READ_REG(&adapter->hw, RCTL); + reg_rctl |= E1000_RCTL_MPE; + E1000_WRITE_REG(&adapter->hw, RCTL, reg_rctl); + } else + em_mc_addr_list_update(&adapter->hw, mta, mcnt, 0, 1); + + if (adapter->hw.mac_type == em_82542_rev2_0) { + reg_rctl = E1000_READ_REG(&adapter->hw, RCTL); + reg_rctl &= ~E1000_RCTL_RST; + E1000_WRITE_REG(&adapter->hw, RCTL, reg_rctl); + msec_delay(5); + if (adapter->hw.pci_cmd_word & CMD_MEM_WRT_INVALIDATE) { + em_pci_set_mwi(&adapter->hw); + } + } + + return; +} + +#ifndef __rtems__ +/********************************************************************* + * Timer routine + * + * This routine checks for link status and updates statistics. + * + **********************************************************************/ + +static void +em_local_timer(void *arg) +{ + struct ifnet *ifp; + struct adapter * adapter = arg; + ifp = &adapter->arpcom.ac_if; + + EM_LOCK(adapter); + + em_check_for_link(&adapter->hw); + em_print_link_status(adapter); + em_update_stats_counters(adapter); + if (em_display_debug_stats && ifp->if_flags & IFF_RUNNING) { + em_print_hw_stats(adapter); + } + em_smartspeed(adapter); + + callout_reset(&adapter->timer, hz, em_local_timer, adapter); + + EM_UNLOCK(adapter); + return; +} +#endif + +static void +em_print_link_status(struct adapter * adapter) +{ +#ifndef __rtems__ + struct ifnet *ifp = &adapter->arpcom.ac_if; +#endif + + if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU) { + if (adapter->link_active == 0) { + em_get_speed_and_duplex(&adapter->hw, + &adapter->link_speed, + &adapter->link_duplex); + if (bootverbose) + printf("em%d: Link is up %d Mbps %s\n", + adapter->unit, + adapter->link_speed, + ((adapter->link_duplex == FULL_DUPLEX) ? + "Full Duplex" : "Half Duplex")); + adapter->link_active = 1; + adapter->smartspeed = 0; +#ifndef __rtems__ + if_link_state_change(ifp, LINK_STATE_UP); +#endif + } + } else { + if (adapter->link_active == 1) { + adapter->link_speed = 0; + adapter->link_duplex = 0; + if (bootverbose) + printf("em%d: Link is Down\n", adapter->unit); + adapter->link_active = 0; +#ifndef __rtems__ + if_link_state_change(ifp, LINK_STATE_UP); + if_link_state_change(ifp, LINK_STATE_DOWN); +#endif + } + } + + return; +} + +/********************************************************************* + * + * This routine disables all traffic on the adapter by issuing a + * global reset on the MAC and deallocates TX/RX buffers. + * + **********************************************************************/ + +static void +em_stop(void *arg) +{ + struct ifnet *ifp; + struct adapter * adapter = arg; + ifp = &adapter->arpcom.ac_if; + + mtx_assert(&adapter->mtx, MA_OWNED); + + INIT_DEBUGOUT("em_stop: begin"); +#ifdef DEVICE_POLLING + ether_poll_deregister(ifp); +#endif + em_disable_intr(adapter); + em_reset_hw(&adapter->hw); + callout_stop(&adapter->timer); + callout_stop(&adapter->tx_fifo_timer); + em_free_transmit_structures(adapter); + em_free_receive_structures(adapter); + + + /* Tell the stack that the interface is no longer active */ + ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); + + return; +} + + +/********************************************************************* + * + * Determine hardware revision. + * + **********************************************************************/ +static void +em_identify_hardware(struct adapter * adapter) +{ + device_t dev = adapter->dev; + + /* Make sure our PCI config space has the necessary stuff set */ + adapter->hw.pci_cmd_word = pci_read_config(dev, PCIR_COMMAND, 2); + if (!((adapter->hw.pci_cmd_word & PCIM_CMD_BUSMASTEREN) && + (adapter->hw.pci_cmd_word & PCIM_CMD_MEMEN))) { + printf("em%d: Memory Access and/or Bus Master bits were not set!\n", + adapter->unit); + adapter->hw.pci_cmd_word |= + (PCIM_CMD_BUSMASTEREN | PCIM_CMD_MEMEN); + pci_write_config(dev, PCIR_COMMAND, adapter->hw.pci_cmd_word, 2); + } + + /* Save off the information about this board */ + adapter->hw.vendor_id = pci_get_vendor(dev); + adapter->hw.device_id = pci_get_device(dev); + adapter->hw.revision_id = pci_read_config(dev, PCIR_REVID, 1); + adapter->hw.subsystem_vendor_id = pci_read_config(dev, PCIR_SUBVEND_0, 2); + adapter->hw.subsystem_id = pci_read_config(dev, PCIR_SUBDEV_0, 2); + + /* Identify the MAC */ + if (em_set_mac_type(&adapter->hw)) + printf("em%d: Unknown MAC Type\n", adapter->unit); + + if(adapter->hw.mac_type == em_82541 || + adapter->hw.mac_type == em_82541_rev_2 || + adapter->hw.mac_type == em_82547 || + adapter->hw.mac_type == em_82547_rev_2) + adapter->hw.phy_init_script = TRUE; + + return; +} + +static int +em_allocate_pci_resources(struct adapter * adapter) +{ + int i, val, rid; + device_t dev = adapter->dev; + + rid = EM_MMBA; + +#ifndef __rtems__ + adapter->res_memory = bus_alloc_resource_any(dev, SYS_RES_MEMORY, + &rid, RF_ACTIVE); + if (!(adapter->res_memory)) { + printf("em%d: Unable to allocate bus resource: memory\n", + adapter->unit); + return(ENXIO); + } + adapter->osdep.mem_bus_space_tag = + rman_get_bustag(adapter->res_memory); + adapter->osdep.mem_bus_space_handle = + rman_get_bushandle(adapter->res_memory); +#endif + + adapter->hw.hw_addr = (uint8_t *)&adapter->osdep.mem_bus_space_handle; + + + if (adapter->hw.mac_type > em_82543) { + /* Figure our where our IO BAR is ? */ + rid = EM_MMBA; + for (i = 0; i < 5; i++) { + val = pci_read_config(dev, rid, 4); + if (val & 0x00000001) { +#ifndef __rtems__ + adapter->io_rid = rid; +#endif + break; + } + rid += 4; + } + +#ifndef __rtems__ + adapter->res_ioport = bus_alloc_resource_any(dev, + SYS_RES_IOPORT, + &adapter->io_rid, + RF_ACTIVE); + if (!(adapter->res_ioport)) { + printf("em%d: Unable to allocate bus resource: ioport\n", + adapter->unit); + return(ENXIO); + } + + adapter->hw.io_base = + rman_get_start(adapter->res_ioport); +#else + adapter->hw.io_base = val & PCI_BASE_ADDRESS_IO_MASK; +#endif + } + +#ifndef __rtems__ + rid = 0x0; + adapter->res_interrupt = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, + RF_SHAREABLE | + RF_ACTIVE); + if (!(adapter->res_interrupt)) { + printf("em%d: Unable to allocate bus resource: interrupt\n", + adapter->unit); + return(ENXIO); + } + if (bus_setup_intr(dev, adapter->res_interrupt, + INTR_TYPE_NET | INTR_MPSAFE, + (void (*)(void *)) em_intr, adapter, + &adapter->int_handler_tag)) { + printf("em%d: Error registering interrupt handler!\n", + adapter->unit); + return(ENXIO); + } +#endif + + adapter->hw.back = &adapter->osdep; + + return(0); +} + +#ifndef __rtems__ +static void +em_free_pci_resources(struct adapter * adapter) +{ + device_t dev = adapter->dev; + + if (adapter->res_interrupt != NULL) { + bus_teardown_intr(dev, adapter->res_interrupt, + adapter->int_handler_tag); + bus_release_resource(dev, SYS_RES_IRQ, 0, + adapter->res_interrupt); + } + if (adapter->res_memory != NULL) { + bus_release_resource(dev, SYS_RES_MEMORY, EM_MMBA, + adapter->res_memory); + } + + if (adapter->res_ioport != NULL) { + bus_release_resource(dev, SYS_RES_IOPORT, adapter->io_rid, + adapter->res_ioport); + } + return; +} +#endif + +/********************************************************************* + * + * Initialize the hardware to a configuration as specified by the + * adapter structure. The controller is reset, the EEPROM is + * verified, the MAC address is set, then the shared initialization + * routines are called. + * + **********************************************************************/ +static int +em_hardware_init(struct adapter * adapter) +{ + INIT_DEBUGOUT("em_hardware_init: begin"); + /* Issue a global reset */ + em_reset_hw(&adapter->hw); + + /* When hardware is reset, fifo_head is also reset */ + adapter->tx_fifo_head = 0; + + /* Make sure we have a good EEPROM before we read from it */ + if (em_validate_eeprom_checksum(&adapter->hw) < 0) { + printf("em%d: The EEPROM Checksum Is Not Valid\n", + adapter->unit); + return(EIO); + } + + if (em_read_part_num(&adapter->hw, &(adapter->part_num)) < 0) { + printf("em%d: EEPROM read error while reading part number\n", + adapter->unit); + return(EIO); + } + + if (em_init_hw(&adapter->hw) < 0) { + printf("em%d: Hardware Initialization Failed", + adapter->unit); + return(EIO); + } + + em_check_for_link(&adapter->hw); + if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU) + adapter->link_active = 1; + else + adapter->link_active = 0; + + if (adapter->link_active) { + em_get_speed_and_duplex(&adapter->hw, + &adapter->link_speed, + &adapter->link_duplex); + } else { + adapter->link_speed = 0; + adapter->link_duplex = 0; + } + + return(0); +} + +/********************************************************************* + * + * Setup networking device structure and register an interface. + * + **********************************************************************/ +static void +em_setup_interface(device_t dev, struct adapter * adapter) +{ + struct ifnet *ifp = &device_get_softc(dev)->arpcom.ac_if; + INIT_DEBUGOUT("em_setup_interface: begin"); + + if_initname(ifp, device_get_name(dev), device_get_unit(dev)); + ifp->if_mtu = ETHERMTU; + ifp->if_baudrate = 1000000000; + ifp->if_init = em_init; + ifp->if_softc = adapter; + ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; +#ifdef __rtems__ + ifp->if_output = ether_output; +#endif + ifp->if_ioctl = em_ioctl; + ifp->if_start = em_start; + ifp->if_watchdog = em_watchdog; +#ifndef __rtems__ + IFQ_SET_MAXLEN(&ifp->if_snd, adapter->num_tx_desc - 1); + ifp->if_snd.ifq_drv_maxlen = adapter->num_tx_desc - 1; + IFQ_SET_READY(&ifp->if_snd); +#else + ifp->if_snd.ifq_maxlen = adapter->num_tx_desc - 1; +#endif + +#ifndef __rtems__ +#if __FreeBSD_version < 500000 + ether_ifattach(ifp, ETHER_BPF_SUPPORTED); +#else + ether_ifattach(ifp, adapter->hw.mac_addr); +#endif +#else + if ( !ifp->if_addrlist ) /* reattach hack */ + { + if_attach(ifp); + ether_ifattach(ifp); + } +#endif + +#ifndef __rtems__ + ifp->if_capabilities = ifp->if_capenable = 0; + + if (adapter->hw.mac_type >= em_82543) { + ifp->if_capabilities |= IFCAP_HWCSUM; + ifp->if_capenable |= IFCAP_HWCSUM; + } + + /* + * Tell the upper layer(s) we support long frames. + */ + ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header); +#if __FreeBSD_version >= 500000 + ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_MTU; + ifp->if_capenable |= IFCAP_VLAN_MTU; +#endif + +#ifdef DEVICE_POLLING + ifp->if_capabilities |= IFCAP_POLLING; + ifp->if_capenable |= IFCAP_POLLING; +#endif + + /* + * Specify the media types supported by this adapter and register + * callbacks to update media and link information + */ + ifmedia_init(&adapter->media, IFM_IMASK, em_media_change, + em_media_status); + if (adapter->hw.media_type == em_media_type_fiber) { + ifmedia_add(&adapter->media, IFM_ETHER | IFM_1000_SX | IFM_FDX, + 0, NULL); + ifmedia_add(&adapter->media, IFM_ETHER | IFM_1000_SX, + 0, NULL); + } else { + ifmedia_add(&adapter->media, IFM_ETHER | IFM_10_T, 0, NULL); + ifmedia_add(&adapter->media, IFM_ETHER | IFM_10_T | IFM_FDX, + 0, NULL); + ifmedia_add(&adapter->media, IFM_ETHER | IFM_100_TX, + 0, NULL); + ifmedia_add(&adapter->media, IFM_ETHER | IFM_100_TX | IFM_FDX, + 0, NULL); +#if __FreeBSD_version < 500000 + ifmedia_add(&adapter->media, IFM_ETHER | IFM_1000_TX | IFM_FDX, + 0, NULL); + ifmedia_add(&adapter->media, IFM_ETHER | IFM_1000_TX, 0, NULL); +#else + ifmedia_add(&adapter->media, IFM_ETHER | IFM_1000_T | IFM_FDX, + 0, NULL); + ifmedia_add(&adapter->media, IFM_ETHER | IFM_1000_T, 0, NULL); +#endif + } + ifmedia_add(&adapter->media, IFM_ETHER | IFM_AUTO, 0, NULL); + ifmedia_set(&adapter->media, IFM_ETHER | IFM_AUTO); +#endif + + return; +} + +#ifndef __rtems__ +/********************************************************************* + * + * Workaround for SmartSpeed on 82541 and 82547 controllers + * + **********************************************************************/ +static void +em_smartspeed(struct adapter *adapter) +{ + uint16_t phy_tmp; + + if(adapter->link_active || (adapter->hw.phy_type != em_phy_igp) || + !adapter->hw.autoneg || !(adapter->hw.autoneg_advertised & ADVERTISE_1000_FULL)) + return; + + if(adapter->smartspeed == 0) { + /* If Master/Slave config fault is asserted twice, + * we assume back-to-back */ + em_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_tmp); + if(!(phy_tmp & SR_1000T_MS_CONFIG_FAULT)) return; + em_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_tmp); + if(phy_tmp & SR_1000T_MS_CONFIG_FAULT) { + em_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, + &phy_tmp); + if(phy_tmp & CR_1000T_MS_ENABLE) { + phy_tmp &= ~CR_1000T_MS_ENABLE; + em_write_phy_reg(&adapter->hw, + PHY_1000T_CTRL, phy_tmp); + adapter->smartspeed++; + if(adapter->hw.autoneg && + !em_phy_setup_autoneg(&adapter->hw) && + !em_read_phy_reg(&adapter->hw, PHY_CTRL, + &phy_tmp)) { + phy_tmp |= (MII_CR_AUTO_NEG_EN | + MII_CR_RESTART_AUTO_NEG); + em_write_phy_reg(&adapter->hw, + PHY_CTRL, phy_tmp); + } + } + } + return; + } else if(adapter->smartspeed == EM_SMARTSPEED_DOWNSHIFT) { + /* If still no link, perhaps using 2/3 pair cable */ + em_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_tmp); + phy_tmp |= CR_1000T_MS_ENABLE; + em_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_tmp); + if(adapter->hw.autoneg && + !em_phy_setup_autoneg(&adapter->hw) && + !em_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_tmp)) { + phy_tmp |= (MII_CR_AUTO_NEG_EN | + MII_CR_RESTART_AUTO_NEG); + em_write_phy_reg(&adapter->hw, PHY_CTRL, phy_tmp); + } + } + /* Restart process after EM_SMARTSPEED_MAX iterations */ + if(adapter->smartspeed++ == EM_SMARTSPEED_MAX) + adapter->smartspeed = 0; + + return; +} + + +/* + * Manage DMA'able memory. + */ +static void +em_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) +{ + if (error) + return; + *(bus_addr_t*) arg = segs->ds_addr; + return; +} +#endif + +static int +em_dma_malloc(struct adapter *adapter, bus_size_t size, + struct em_dma_alloc *dma, int mapflags) +{ + int r; + +#ifndef __rtems__ + r = bus_dma_tag_create(NULL, /* parent */ + PAGE_SIZE, 0, /* alignment, bounds */ + BUS_SPACE_MAXADDR, /* lowaddr */ + BUS_SPACE_MAXADDR, /* highaddr */ + NULL, NULL, /* filter, filterarg */ + size, /* maxsize */ + 1, /* nsegments */ + size, /* maxsegsize */ + BUS_DMA_ALLOCNOW, /* flags */ + NULL, /* lockfunc */ + NULL, /* lockarg */ + &dma->dma_tag); + if (r != 0) { + printf("em%d: em_dma_malloc: bus_dma_tag_create failed; " + "error %u\n", adapter->unit, r); + goto fail_0; + } + + r = bus_dmamem_alloc(dma->dma_tag, (void**) &dma->dma_vaddr, + BUS_DMA_NOWAIT, &dma->dma_map); +#else + if ( (dma->malloc_base = malloc( size + PAGE_SIZE, M_DEVBUF, M_NOWAIT )) ) { + r = 0; + dma->dma_vaddr = (caddr_t)_DO_ALIGN(dma->malloc_base, PAGE_SIZE); + } else { + r = -1; + } +#endif + if (r != 0) { +#ifndef __rtems__ + printf("em%d: em_dma_malloc: bus_dmammem_alloc failed; " + "size %ju, error %d\n", adapter->unit, + (uintmax_t)size, r); +#else + printf("em%d: em_dma_malloc: bus_dmammem_alloc failed; " + "size %u, error %d\n", adapter->unit, + size, r); +#endif + goto fail_2; + } + +#ifndef __rtems__ + r = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, + size, + em_dmamap_cb, + &dma->dma_paddr, + mapflags | BUS_DMA_NOWAIT); +#else + dma->dma_paddr = kvtop(dma->dma_vaddr); +#endif + if (r != 0) { + printf("em%d: em_dma_malloc: bus_dmamap_load failed; " + "error %u\n", adapter->unit, r); + goto fail_3; + } + +#ifndef __rtems__ + dma->dma_size = size; +#endif + return (0); + +fail_3: + bus_dmamap_unload(dma->dma_tag, dma->dma_map); +fail_2: +#ifndef __rtems__ + bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); +#else + free(dma->malloc_base, M_DEVBUF); + dma->dma_vaddr = dma->malloc_base = 0; + dma->dma_paddr = 0; +#endif + bus_dma_tag_destroy(dma->dma_tag); +#ifndef __rtems__ +fail_0: + dma->dma_map = NULL; + dma->dma_tag = NULL; +#endif + return (r); +} + +static void +em_dma_free(struct adapter *adapter, struct em_dma_alloc *dma) +{ + bus_dmamap_unload(dma->dma_tag, dma->dma_map); +#ifndef __rtems__ + bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); +#else + free(dma->malloc_base, M_DEVBUF); + dma->dma_vaddr = dma->malloc_base = 0; + dma->dma_paddr = 0; +#endif + bus_dma_tag_destroy(dma->dma_tag); +} + + +/********************************************************************* + * + * Allocate memory for tx_buffer structures. The tx_buffer stores all + * the information needed to transmit a packet on the wire. + * + **********************************************************************/ +static int +em_allocate_transmit_structures(struct adapter * adapter) +{ + if (!(adapter->tx_buffer_area = + (struct em_buffer *) malloc(sizeof(struct em_buffer) * + adapter->num_tx_desc, M_DEVBUF, + M_NOWAIT))) { + printf("em%d: Unable to allocate tx_buffer memory\n", + adapter->unit); + return ENOMEM; + } + + bzero(adapter->tx_buffer_area, + sizeof(struct em_buffer) * adapter->num_tx_desc); + + return 0; +} + +/********************************************************************* + * + * Allocate and initialize transmit structures. + * + **********************************************************************/ +static int +em_setup_transmit_structures(struct adapter * adapter) +{ +#ifndef __rtems__ + /* + * Setup DMA descriptor areas. + */ + if (bus_dma_tag_create(NULL, /* parent */ + 1, 0, /* alignment, bounds */ + BUS_SPACE_MAXADDR, /* lowaddr */ + BUS_SPACE_MAXADDR, /* highaddr */ + NULL, NULL, /* filter, filterarg */ + MCLBYTES * 8, /* maxsize */ + EM_MAX_SCATTER, /* nsegments */ + MCLBYTES * 8, /* maxsegsize */ + BUS_DMA_ALLOCNOW, /* flags */ + NULL, /* lockfunc */ + NULL, /* lockarg */ + &adapter->txtag)) { + printf("em%d: Unable to allocate TX DMA tag\n", adapter->unit); + return (ENOMEM); + } +#endif + + if (em_allocate_transmit_structures(adapter)) + return (ENOMEM); + + bzero((void *) adapter->tx_desc_base, + (sizeof(struct em_tx_desc)) * adapter->num_tx_desc); + + adapter->next_avail_tx_desc = 0; + adapter->oldest_used_tx_desc = 0; + + /* Set number of descriptors available */ + adapter->num_tx_desc_avail = adapter->num_tx_desc; + + /* Set checksum context */ + adapter->active_checksum_context = OFFLOAD_NONE; + + return (0); +} + +/********************************************************************* + * + * Enable transmit unit. + * + **********************************************************************/ +static void +em_initialize_transmit_unit(struct adapter * adapter) +{ + u_int32_t reg_tctl; + u_int32_t reg_tipg = 0; + u_int64_t bus_addr; + + INIT_DEBUGOUT("em_initialize_transmit_unit: begin"); + /* Setup the Base and Length of the Tx Descriptor Ring */ + bus_addr = adapter->txdma.dma_paddr; + E1000_WRITE_REG(&adapter->hw, TDBAL, (u_int32_t)bus_addr); + E1000_WRITE_REG(&adapter->hw, TDBAH, (u_int32_t)(bus_addr >> 32)); + E1000_WRITE_REG(&adapter->hw, TDLEN, + adapter->num_tx_desc * + sizeof(struct em_tx_desc)); + + /* Setup the HW Tx Head and Tail descriptor pointers */ + E1000_WRITE_REG(&adapter->hw, TDH, 0); + E1000_WRITE_REG(&adapter->hw, TDT, 0); + + + HW_DEBUGOUT2("Base = %" PRIx32 ", Length = %" PRIx32 "\n", + E1000_READ_REG(&adapter->hw, TDBAL), + E1000_READ_REG(&adapter->hw, TDLEN)); + + /* Set the default values for the Tx Inter Packet Gap timer */ + switch (adapter->hw.mac_type) { + case em_82542_rev2_0: + case em_82542_rev2_1: + reg_tipg = DEFAULT_82542_TIPG_IPGT; + reg_tipg |= DEFAULT_82542_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT; + reg_tipg |= DEFAULT_82542_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT; + break; + default: + if (adapter->hw.media_type == em_media_type_fiber) + reg_tipg = DEFAULT_82543_TIPG_IPGT_FIBER; + else + reg_tipg = DEFAULT_82543_TIPG_IPGT_COPPER; + reg_tipg |= DEFAULT_82543_TIPG_IPGR1 << E1000_TIPG_IPGR1_SHIFT; + reg_tipg |= DEFAULT_82543_TIPG_IPGR2 << E1000_TIPG_IPGR2_SHIFT; + } + + E1000_WRITE_REG(&adapter->hw, TIPG, reg_tipg); + E1000_WRITE_REG(&adapter->hw, TIDV, adapter->tx_int_delay.value); + if(adapter->hw.mac_type >= em_82540) + E1000_WRITE_REG(&adapter->hw, TADV, + adapter->tx_abs_int_delay.value); + + /* Program the Transmit Control Register */ + reg_tctl = E1000_TCTL_PSP | E1000_TCTL_EN | + (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); + if (adapter->hw.mac_type >= em_82573) + reg_tctl |= E1000_TCTL_MULR; + if (adapter->link_duplex == 1) { + reg_tctl |= E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT; + } else { + reg_tctl |= E1000_HDX_COLLISION_DISTANCE << E1000_COLD_SHIFT; + } + E1000_WRITE_REG(&adapter->hw, TCTL, reg_tctl); + + /* Setup Transmit Descriptor Settings for this adapter */ + adapter->txd_cmd = E1000_TXD_CMD_IFCS | E1000_TXD_CMD_RS; + + if (adapter->tx_int_delay.value > 0) + adapter->txd_cmd |= E1000_TXD_CMD_IDE; + + return; +} + +/********************************************************************* + * + * Free all transmit related data structures. + * + **********************************************************************/ +static void +em_free_transmit_structures(struct adapter * adapter) +{ + struct em_buffer *tx_buffer; + int i; + + INIT_DEBUGOUT("free_transmit_structures: begin"); + + if (adapter->tx_buffer_area != NULL) { + tx_buffer = adapter->tx_buffer_area; + for (i = 0; i < adapter->num_tx_desc; i++, tx_buffer++) { + if (tx_buffer->m_head != NULL) { + bus_dmamap_unload(adapter->txtag, tx_buffer->map); + bus_dmamap_destroy(adapter->txtag, tx_buffer->map); + m_freem(tx_buffer->m_head); + } + tx_buffer->m_head = NULL; + } + } + if (adapter->tx_buffer_area != NULL) { + free(adapter->tx_buffer_area, M_DEVBUF); + adapter->tx_buffer_area = NULL; + } +#ifndef __rtems__ + if (adapter->txtag != NULL) { + bus_dma_tag_destroy(adapter->txtag); + adapter->txtag = NULL; + } +#endif + return; +} + +#ifndef __rtems__ +/********************************************************************* + * + * The offload context needs to be set when we transfer the first + * packet of a particular protocol (TCP/UDP). We change the + * context only if the protocol type changes. + * + **********************************************************************/ +static void +em_transmit_checksum_setup(struct adapter * adapter, + struct mbuf *mp, + u_int32_t *txd_upper, + u_int32_t *txd_lower) +{ + struct em_context_desc *TXD; + struct em_buffer *tx_buffer; + int curr_txd; + + if (mp->m_pkthdr.csum_flags) { + + if (mp->m_pkthdr.csum_flags & CSUM_TCP) { + *txd_upper = E1000_TXD_POPTS_TXSM << 8; + *txd_lower = E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D; + if (adapter->active_checksum_context == OFFLOAD_TCP_IP) + return; + else + adapter->active_checksum_context = OFFLOAD_TCP_IP; + + } else if (mp->m_pkthdr.csum_flags & CSUM_UDP) { + *txd_upper = E1000_TXD_POPTS_TXSM << 8; + *txd_lower = E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D; + if (adapter->active_checksum_context == OFFLOAD_UDP_IP) + return; + else + adapter->active_checksum_context = OFFLOAD_UDP_IP; + } else { + *txd_upper = 0; + *txd_lower = 0; + return; + } + } else { + *txd_upper = 0; + *txd_lower = 0; + return; + } + + /* If we reach this point, the checksum offload context + * needs to be reset. + */ + curr_txd = adapter->next_avail_tx_desc; + tx_buffer = &adapter->tx_buffer_area[curr_txd]; + TXD = (struct em_context_desc *) &adapter->tx_desc_base[curr_txd]; + + TXD->lower_setup.ip_fields.ipcss = ETHER_HDR_LEN; + TXD->lower_setup.ip_fields.ipcso = + ETHER_HDR_LEN + offsetof(struct ip, ip_sum); + TXD->lower_setup.ip_fields.ipcse = + htole16(ETHER_HDR_LEN + sizeof(struct ip) - 1); + + TXD->upper_setup.tcp_fields.tucss = + ETHER_HDR_LEN + sizeof(struct ip); + TXD->upper_setup.tcp_fields.tucse = htole16(0); + + if (adapter->active_checksum_context == OFFLOAD_TCP_IP) { + TXD->upper_setup.tcp_fields.tucso = + ETHER_HDR_LEN + sizeof(struct ip) + + offsetof(struct tcphdr, th_sum); + } else if (adapter->active_checksum_context == OFFLOAD_UDP_IP) { + TXD->upper_setup.tcp_fields.tucso = + ETHER_HDR_LEN + sizeof(struct ip) + + offsetof(struct udphdr, uh_sum); + } + + TXD->tcp_seg_setup.data = htole32(0); + TXD->cmd_and_length = htole32(adapter->txd_cmd | E1000_TXD_CMD_DEXT); + + tx_buffer->m_head = NULL; + + if (++curr_txd == adapter->num_tx_desc) + curr_txd = 0; + + adapter->num_tx_desc_avail--; + adapter->next_avail_tx_desc = curr_txd; + + return; +} +#endif + +/********************************************************************** + * + * Examine each tx_buffer in the used queue. If the hardware is done + * processing the packet then free associated resources. The + * tx_buffer is put back on the free queue. + * + **********************************************************************/ +static void +em_clean_transmit_interrupts(struct adapter * adapter) +{ + int i, num_avail; + struct em_buffer *tx_buffer; + struct em_tx_desc *tx_desc; + struct ifnet *ifp = &adapter->arpcom.ac_if; + + mtx_assert(&adapter->mtx, MA_OWNED); + + if (adapter->num_tx_desc_avail == adapter->num_tx_desc) + return; + + num_avail = adapter->num_tx_desc_avail; + i = adapter->oldest_used_tx_desc; + + tx_buffer = &adapter->tx_buffer_area[i]; + tx_desc = &adapter->tx_desc_base[i]; + + bus_dmamap_sync(adapter->txdma.dma_tag, adapter->txdma.dma_map, + BUS_DMASYNC_POSTREAD); + while (tx_desc->upper.fields.status & E1000_TXD_STAT_DD) { + + tx_desc->upper.data = 0; + num_avail++; + + if (tx_buffer->m_head) { + ifp->if_opackets++; + bus_dmamap_unload(adapter->txtag, tx_buffer->map); + bus_dmamap_destroy(adapter->txtag, tx_buffer->map); + + m_freem(tx_buffer->m_head); + tx_buffer->m_head = NULL; + } + + if (++i == adapter->num_tx_desc) + i = 0; + + tx_buffer = &adapter->tx_buffer_area[i]; + tx_desc = &adapter->tx_desc_base[i]; + } + bus_dmamap_sync(adapter->txdma.dma_tag, adapter->txdma.dma_map, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + + adapter->oldest_used_tx_desc = i; + + /* + * If we have enough room, clear IFF_OACTIVE to tell the stack + * that it is OK to send packets. + * If there are no pending descriptors, clear the timeout. Otherwise, + * if some descriptors have been freed, restart the timeout. + */ + if (num_avail > EM_TX_CLEANUP_THRESHOLD) { + ifp->if_flags &= ~IFF_OACTIVE; + if (num_avail == adapter->num_tx_desc) + ifp->if_timer = 0; + else if (num_avail == adapter->num_tx_desc_avail) + ifp->if_timer = EM_TX_TIMEOUT; + } + adapter->num_tx_desc_avail = num_avail; + return; +} + +/********************************************************************* + * + * Get a buffer from system mbuf buffer pool. + * + **********************************************************************/ +static int +em_get_buf(int i, struct adapter *adapter, + struct mbuf *nmp) +{ + register struct mbuf *mp = nmp; + struct em_buffer *rx_buffer; + struct ifnet *ifp; + bus_addr_t paddr; +#ifndef __rtems__ + int error; +#endif + + ifp = &adapter->arpcom.ac_if; + + if (mp == NULL) { +#ifndef __rtems__ + mp = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); +#else + MGETHDR(mp, M_DONTWAIT, MT_DATA); + if ( mp ) { + MCLGET( mp, M_DONTWAIT ); + if ( !(mp->m_flags & M_EXT) ) { + m_freem(mp); + mp = 0; + } + } +#endif + if (mp == NULL) { + adapter->mbuf_cluster_failed++; + return(ENOBUFS); + } + mp->m_len = mp->m_pkthdr.len = MCLBYTES; + } else { + mp->m_len = mp->m_pkthdr.len = MCLBYTES; + mp->m_data = mp->m_ext.ext_buf; + mp->m_next = NULL; + } + + if (ifp->if_mtu <= ETHERMTU) { + m_adj(mp, ETHER_ALIGN); + } + + rx_buffer = &adapter->rx_buffer_area[i]; + +#ifndef __rtems__ + /* + * Using memory from the mbuf cluster pool, invoke the + * bus_dma machinery to arrange the memory mapping. + */ + error = bus_dmamap_load(adapter->rxtag, rx_buffer->map, + mtod(mp, void *), mp->m_len, + em_dmamap_cb, &paddr, 0); + if (error) { + m_free(mp); + return(error); + } +#else + paddr = kvtop(mtod(mp, void*)); +#endif + + rx_buffer->m_head = mp; + adapter->rx_desc_base[i].buffer_addr = htole64(paddr); + bus_dmamap_sync(adapter->rxtag, rx_buffer->map, BUS_DMASYNC_PREREAD); + + return(0); +} + +/********************************************************************* + * + * Allocate memory for rx_buffer structures. Since we use one + * rx_buffer per received packet, the maximum number of rx_buffer's + * that we'll need is equal to the number of receive descriptors + * that we've allocated. + * + **********************************************************************/ +static int +em_allocate_receive_structures(struct adapter * adapter) +{ + int i, error; +#ifndef __rtems__ + struct em_buffer *rx_buffer; +#endif + + if (!(adapter->rx_buffer_area = + (struct em_buffer *) malloc(sizeof(struct em_buffer) * + adapter->num_rx_desc, M_DEVBUF, + M_NOWAIT))) { + printf("em%d: Unable to allocate rx_buffer memory\n", + adapter->unit); + return(ENOMEM); + } + + bzero(adapter->rx_buffer_area, + sizeof(struct em_buffer) * adapter->num_rx_desc); + +#ifndef __rtems__ + error = bus_dma_tag_create(NULL, /* parent */ + 1, 0, /* alignment, bounds */ + BUS_SPACE_MAXADDR, /* lowaddr */ + BUS_SPACE_MAXADDR, /* highaddr */ + NULL, NULL, /* filter, filterarg */ + MCLBYTES, /* maxsize */ + 1, /* nsegments */ + MCLBYTES, /* maxsegsize */ + BUS_DMA_ALLOCNOW, /* flags */ + NULL, /* lockfunc */ + NULL, /* lockarg */ + &adapter->rxtag); + if (error != 0) { + printf("em%d: em_allocate_receive_structures: " + "bus_dma_tag_create failed; error %u\n", + adapter->unit, error); + goto fail_0; + } + rx_buffer = adapter->rx_buffer_area; + for (i = 0; i < adapter->num_rx_desc; i++, rx_buffer++) { + error = bus_dmamap_create(adapter->rxtag, BUS_DMA_NOWAIT, + &rx_buffer->map); + if (error != 0) { + printf("em%d: em_allocate_receive_structures: " + "bus_dmamap_create failed; error %u\n", + adapter->unit, error); + goto fail_1; + } + } + +#else + error = 0; +#endif + + for (i = 0; i < adapter->num_rx_desc; i++) { + error = em_get_buf(i, adapter, NULL); + if (error != 0) { + adapter->rx_buffer_area[i].m_head = NULL; + adapter->rx_desc_base[i].buffer_addr = 0; + return(error); + } + } + bus_dmamap_sync(adapter->rxdma.dma_tag, adapter->rxdma.dma_map, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + + return(0); + +#ifndef __rtems__ +fail_1: + bus_dma_tag_destroy(adapter->rxtag); +fail_0: + adapter->rxtag = NULL; +#endif + free(adapter->rx_buffer_area, M_DEVBUF); + adapter->rx_buffer_area = NULL; + return (error); +} + +/********************************************************************* + * + * Allocate and initialize receive structures. + * + **********************************************************************/ +static int +em_setup_receive_structures(struct adapter * adapter) +{ + bzero((void *) adapter->rx_desc_base, + (sizeof(struct em_rx_desc)) * adapter->num_rx_desc); + + if (em_allocate_receive_structures(adapter)) + return ENOMEM; + + /* Setup our descriptor pointers */ + adapter->next_rx_desc_to_check = 0; + return(0); +} + +/********************************************************************* + * + * Enable receive unit. + * + **********************************************************************/ +static void +em_initialize_receive_unit(struct adapter * adapter) +{ + u_int32_t reg_rctl; +#ifndef __rtems__ + u_int32_t reg_rxcsum; +#endif + struct ifnet *ifp; + u_int64_t bus_addr; + + INIT_DEBUGOUT("em_initialize_receive_unit: begin"); + ifp = &adapter->arpcom.ac_if; + + /* Make sure receives are disabled while setting up the descriptor ring */ + E1000_WRITE_REG(&adapter->hw, RCTL, 0); + + /* Set the Receive Delay Timer Register */ + E1000_WRITE_REG(&adapter->hw, RDTR, + adapter->rx_int_delay.value | E1000_RDT_FPDB); + + if(adapter->hw.mac_type >= em_82540) { + E1000_WRITE_REG(&adapter->hw, RADV, + adapter->rx_abs_int_delay.value); + + /* Set the interrupt throttling rate. Value is calculated + * as DEFAULT_ITR = 1/(MAX_INTS_PER_SEC * 256ns) */ +#define MAX_INTS_PER_SEC 8000 +#define DEFAULT_ITR 1000000000/(MAX_INTS_PER_SEC * 256) + E1000_WRITE_REG(&adapter->hw, ITR, DEFAULT_ITR); + } + + /* Setup the Base and Length of the Rx Descriptor Ring */ + bus_addr = adapter->rxdma.dma_paddr; + E1000_WRITE_REG(&adapter->hw, RDBAL, (u_int32_t)bus_addr); + E1000_WRITE_REG(&adapter->hw, RDBAH, (u_int32_t)(bus_addr >> 32)); + E1000_WRITE_REG(&adapter->hw, RDLEN, adapter->num_rx_desc * + sizeof(struct em_rx_desc)); + + /* Setup the HW Rx Head and Tail Descriptor Pointers */ + E1000_WRITE_REG(&adapter->hw, RDH, 0); + E1000_WRITE_REG(&adapter->hw, RDT, adapter->num_rx_desc - 1); + + /* Setup the Receive Control Register */ + reg_rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_LBM_NO | + E1000_RCTL_RDMTS_HALF | + (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT); + + if (adapter->hw.tbi_compatibility_on == TRUE) + reg_rctl |= E1000_RCTL_SBP; + + + switch (adapter->rx_buffer_len) { + default: + case EM_RXBUFFER_2048: + reg_rctl |= E1000_RCTL_SZ_2048; + break; + case EM_RXBUFFER_4096: + reg_rctl |= E1000_RCTL_SZ_4096 | E1000_RCTL_BSEX | E1000_RCTL_LPE; + break; + case EM_RXBUFFER_8192: + reg_rctl |= E1000_RCTL_SZ_8192 | E1000_RCTL_BSEX | E1000_RCTL_LPE; + break; + case EM_RXBUFFER_16384: + reg_rctl |= E1000_RCTL_SZ_16384 | E1000_RCTL_BSEX | E1000_RCTL_LPE; + break; + } + + if (ifp->if_mtu > ETHERMTU) + reg_rctl |= E1000_RCTL_LPE; + +#ifndef __rtems__ + /* Enable 82543 Receive Checksum Offload for TCP and UDP */ + if ((adapter->hw.mac_type >= em_82543) && + (ifp->if_capenable & IFCAP_RXCSUM)) { + reg_rxcsum = E1000_READ_REG(&adapter->hw, RXCSUM); + reg_rxcsum |= (E1000_RXCSUM_IPOFL | E1000_RXCSUM_TUOFL); + E1000_WRITE_REG(&adapter->hw, RXCSUM, reg_rxcsum); + } +#endif + + /* Enable Receives */ + E1000_WRITE_REG(&adapter->hw, RCTL, reg_rctl); + + return; +} + +/********************************************************************* + * + * Free receive related data structures. + * + **********************************************************************/ +static void +em_free_receive_structures(struct adapter *adapter) +{ + struct em_buffer *rx_buffer; + int i; + + INIT_DEBUGOUT("free_receive_structures: begin"); + + if (adapter->rx_buffer_area != NULL) { + rx_buffer = adapter->rx_buffer_area; + for (i = 0; i < adapter->num_rx_desc; i++, rx_buffer++) { +#ifndef __rtems__ + if (rx_buffer->map != NULL) { + bus_dmamap_unload(adapter->rxtag, rx_buffer->map); + bus_dmamap_destroy(adapter->rxtag, rx_buffer->map); + } +#endif + if (rx_buffer->m_head != NULL) + m_freem(rx_buffer->m_head); + rx_buffer->m_head = NULL; + } + } + if (adapter->rx_buffer_area != NULL) { + free(adapter->rx_buffer_area, M_DEVBUF); + adapter->rx_buffer_area = NULL; + } +#ifndef __rtems__ + if (adapter->rxtag != NULL) { + bus_dma_tag_destroy(adapter->rxtag); + adapter->rxtag = NULL; + } +#endif + return; +} + +/********************************************************************* + * + * This routine executes in interrupt context. It replenishes + * the mbufs in the descriptor and sends data which has been + * dma'ed into host memory to upper layer. + * + * We loop at most count times if count is > 0, or until done if + * count < 0. + * + *********************************************************************/ +static void +em_process_receive_interrupts(struct adapter * adapter, int count) +{ + struct ifnet *ifp; + struct mbuf *mp; +#if __FreeBSD_version < 500000 + struct ether_header *eh; +#endif + u_int8_t accept_frame = 0; + u_int8_t eop = 0; + u_int16_t len, desc_len, prev_len_adj; + int i; + + /* Pointer to the receive descriptor being examined. */ + struct em_rx_desc *current_desc; + + mtx_assert(&adapter->mtx, MA_OWNED); + + ifp = &adapter->arpcom.ac_if; + i = adapter->next_rx_desc_to_check; + current_desc = &adapter->rx_desc_base[i]; + bus_dmamap_sync(adapter->rxdma.dma_tag, adapter->rxdma.dma_map, + BUS_DMASYNC_POSTREAD); + + if (!((current_desc->status) & E1000_RXD_STAT_DD)) { + return; + } + + while ((current_desc->status & E1000_RXD_STAT_DD) && (count != 0)) { + + mp = adapter->rx_buffer_area[i].m_head; + bus_dmamap_sync(adapter->rxtag, adapter->rx_buffer_area[i].map, + BUS_DMASYNC_POSTREAD); + + accept_frame = 1; + prev_len_adj = 0; + desc_len = le16toh(current_desc->length); + if (current_desc->status & E1000_RXD_STAT_EOP) { + count--; + eop = 1; + if (desc_len < ETHER_CRC_LEN) { + len = 0; + prev_len_adj = ETHER_CRC_LEN - desc_len; + } + else { + len = desc_len - ETHER_CRC_LEN; + } + } else { + eop = 0; + len = desc_len; + } + + if (current_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK) { + u_int8_t last_byte; + u_int32_t pkt_len = desc_len; + + if (adapter->fmp != NULL) + pkt_len += adapter->fmp->m_pkthdr.len; + + last_byte = *(mtod(mp, caddr_t) + desc_len - 1); + + if (TBI_ACCEPT(&adapter->hw, current_desc->status, + current_desc->errors, + pkt_len, last_byte)) { + em_tbi_adjust_stats(&adapter->hw, + &adapter->stats, + pkt_len, + adapter->hw.mac_addr); + if (len > 0) len--; + } + else { + accept_frame = 0; + } + } + + if (accept_frame) { + + if (em_get_buf(i, adapter, NULL) == ENOBUFS) { + adapter->dropped_pkts++; + em_get_buf(i, adapter, mp); + if (adapter->fmp != NULL) + m_freem(adapter->fmp); + adapter->fmp = NULL; + adapter->lmp = NULL; + break; + } + + /* Assign correct length to the current fragment */ + mp->m_len = len; + + if (adapter->fmp == NULL) { + mp->m_pkthdr.len = len; + adapter->fmp = mp; /* Store the first mbuf */ + adapter->lmp = mp; + } else { + /* Chain mbuf's together */ + mp->m_flags &= ~M_PKTHDR; + /* + * Adjust length of previous mbuf in chain if we + * received less than 4 bytes in the last descriptor. + */ + if (prev_len_adj > 0) { + adapter->lmp->m_len -= prev_len_adj; + adapter->fmp->m_pkthdr.len -= prev_len_adj; + } + adapter->lmp->m_next = mp; + adapter->lmp = adapter->lmp->m_next; + adapter->fmp->m_pkthdr.len += len; + } + + if (eop) { + adapter->fmp->m_pkthdr.rcvif = ifp; + ifp->if_ipackets++; + +#if __FreeBSD_version < 500000 + eh = mtod(adapter->fmp, struct ether_header *); + /* Remove ethernet header from mbuf */ + m_adj(adapter->fmp, sizeof(struct ether_header)); +#ifndef __rtems__ + em_receive_checksum(adapter, current_desc, + adapter->fmp); + if (current_desc->status & E1000_RXD_STAT_VP) + VLAN_INPUT_TAG(eh, adapter->fmp, + (current_desc->special & + E1000_RXD_SPC_VLAN_MASK)); + else +#endif + ether_input(ifp, eh, adapter->fmp); +#else + + em_receive_checksum(adapter, current_desc, + adapter->fmp); + if (current_desc->status & E1000_RXD_STAT_VP) + VLAN_INPUT_TAG(ifp, adapter->fmp, + (current_desc->special & + E1000_RXD_SPC_VLAN_MASK), + adapter->fmp = NULL); + + if (adapter->fmp != NULL) { + EM_UNLOCK(adapter); + (*ifp->if_input)(ifp, adapter->fmp); + EM_LOCK(adapter); + } +#endif + adapter->fmp = NULL; + adapter->lmp = NULL; + } + } else { + adapter->dropped_pkts++; + em_get_buf(i, adapter, mp); + if (adapter->fmp != NULL) + m_freem(adapter->fmp); + adapter->fmp = NULL; + adapter->lmp = NULL; + } + + /* Zero out the receive descriptors status */ + current_desc->status = 0; + + /* Advance the E1000's Receive Queue #0 "Tail Pointer". */ + E1000_WRITE_REG(&adapter->hw, RDT, i); + + /* Advance our pointers to the next descriptor */ + if (++i == adapter->num_rx_desc) { + i = 0; + current_desc = adapter->rx_desc_base; + } else + current_desc++; + } + bus_dmamap_sync(adapter->rxdma.dma_tag, adapter->rxdma.dma_map, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + adapter->next_rx_desc_to_check = i; + return; +} + +#ifndef __rtems__ +/********************************************************************* + * + * Verify that the hardware indicated that the checksum is valid. + * Inform the stack about the status of checksum so that stack + * doesn't spend time verifying the checksum. + * + *********************************************************************/ +static void +em_receive_checksum(struct adapter *adapter, + struct em_rx_desc *rx_desc, + struct mbuf *mp) +{ + /* 82543 or newer only */ + if ((adapter->hw.mac_type < em_82543) || + /* Ignore Checksum bit is set */ + (rx_desc->status & E1000_RXD_STAT_IXSM)) { + mp->m_pkthdr.csum_flags = 0; + return; + } + + if (rx_desc->status & E1000_RXD_STAT_IPCS) { + /* Did it pass? */ + if (!(rx_desc->errors & E1000_RXD_ERR_IPE)) { + /* IP Checksum Good */ + mp->m_pkthdr.csum_flags = CSUM_IP_CHECKED; + mp->m_pkthdr.csum_flags |= CSUM_IP_VALID; + + } else { + mp->m_pkthdr.csum_flags = 0; + } + } + + if (rx_desc->status & E1000_RXD_STAT_TCPCS) { + /* Did it pass? */ + if (!(rx_desc->errors & E1000_RXD_ERR_TCPE)) { + mp->m_pkthdr.csum_flags |= + (CSUM_DATA_VALID | CSUM_PSEUDO_HDR); + mp->m_pkthdr.csum_data = htons(0xffff); + } + } + + return; +} + + +static void +em_enable_vlans(struct adapter *adapter) +{ + uint32_t ctrl; + + E1000_WRITE_REG(&adapter->hw, VET, ETHERTYPE_VLAN); + + ctrl = E1000_READ_REG(&adapter->hw, CTRL); + ctrl |= E1000_CTRL_VME; + E1000_WRITE_REG(&adapter->hw, CTRL, ctrl); + + return; +} + +static void +em_disable_vlans(struct adapter *adapter) +{ + uint32_t ctrl; + + ctrl = E1000_READ_REG(&adapter->hw, CTRL); + ctrl &= ~E1000_CTRL_VME; + E1000_WRITE_REG(&adapter->hw, CTRL, ctrl); + + return; +} +#endif + +static void +em_enable_intr(struct adapter * adapter) +{ + E1000_WRITE_REG(&adapter->hw, IMS, (IMS_ENABLE_MASK)); + return; +} + +static void +em_disable_intr(struct adapter *adapter) +{ + /* + * The first version of 82542 had an errata where when link was forced it + * would stay up even up even if the cable was disconnected. Sequence errors + * were used to detect the disconnect and then the driver would unforce the link. + * This code in the in the ISR. For this to work correctly the Sequence error + * interrupt had to be enabled all the time. + */ + + if (adapter->hw.mac_type == em_82542_rev2_0) + E1000_WRITE_REG(&adapter->hw, IMC, + (0xffffffff & ~E1000_IMC_RXSEQ)); + else + E1000_WRITE_REG(&adapter->hw, IMC, + 0xffffffff); + return; +} + +static int +em_is_valid_ether_addr(u_int8_t *addr) +{ + char zero_addr[6] = { 0, 0, 0, 0, 0, 0 }; + + if ((addr[0] & 1) || (!bcmp(addr, zero_addr, ETHER_ADDR_LEN))) { + return (FALSE); + } + + return(TRUE); +} + +void +em_write_pci_cfg(struct em_hw *hw, + uint32_t reg, + uint16_t *value) +{ + pci_write_config(((struct em_osdep *)hw->back)->dev, reg, + *value, 2); +} + +void +em_read_pci_cfg(struct em_hw *hw, uint32_t reg, + uint16_t *value) +{ + *value = pci_read_config(((struct em_osdep *)hw->back)->dev, + reg, 2); + return; +} + +void +em_pci_set_mwi(struct em_hw *hw) +{ + pci_write_config(((struct em_osdep *)hw->back)->dev, + PCIR_COMMAND, + (hw->pci_cmd_word | CMD_MEM_WRT_INVALIDATE), 2); + return; +} + +void +em_pci_clear_mwi(struct em_hw *hw) +{ + pci_write_config(((struct em_osdep *)hw->back)->dev, + PCIR_COMMAND, + (hw->pci_cmd_word & ~CMD_MEM_WRT_INVALIDATE), 2); + return; +} + +uint32_t +em_io_read(struct em_hw *hw, unsigned long port) +{ + return(inl(port)); +} + +void +em_io_write(struct em_hw *hw, unsigned long port, uint32_t value) +{ +#ifndef __rtems__ + outl(port, value); +#else + /* everybody else has this the other way round! */ + outl(value, port); +#endif + return; +} + +/********************************************************************* +* 82544 Coexistence issue workaround. +* There are 2 issues. +* 1. Transmit Hang issue. +* To detect this issue, following equation can be used... +* SIZE[3:0] + ADDR[2:0] = SUM[3:0]. +* If SUM[3:0] is in between 1 to 4, we will have this issue. +* +* 2. DAC issue. +* To detect this issue, following equation can be used... +* SIZE[3:0] + ADDR[2:0] = SUM[3:0]. +* If SUM[3:0] is in between 9 to c, we will have this issue. +* +* +* WORKAROUND: +* Make sure we do not have ending address as 1,2,3,4(Hang) or 9,a,b,c (DAC) +* +*** *********************************************************************/ +static u_int32_t +em_fill_descriptors (u_int64_t address, + u_int32_t length, + PDESC_ARRAY desc_array) +{ + /* Since issue is sensitive to length and address.*/ + /* Let us first check the address...*/ + u_int32_t safe_terminator; + if (length <= 4) { + desc_array->descriptor[0].address = address; + desc_array->descriptor[0].length = length; + desc_array->elements = 1; + return desc_array->elements; + } + safe_terminator = (u_int32_t)((((u_int32_t)address & 0x7) + (length & 0xF)) & 0xF); + /* if it does not fall between 0x1 to 0x4 and 0x9 to 0xC then return */ + if (safe_terminator == 0 || + (safe_terminator > 4 && + safe_terminator < 9) || + (safe_terminator > 0xC && + safe_terminator <= 0xF)) { + desc_array->descriptor[0].address = address; + desc_array->descriptor[0].length = length; + desc_array->elements = 1; + return desc_array->elements; + } + + desc_array->descriptor[0].address = address; + desc_array->descriptor[0].length = length - 4; + desc_array->descriptor[1].address = address + (length - 4); + desc_array->descriptor[1].length = 4; + desc_array->elements = 2; + return desc_array->elements; +} + +/********************************************************************** + * + * Update the board statistics counters. + * + **********************************************************************/ +static void +em_update_stats_counters(struct adapter *adapter) +{ + struct ifnet *ifp; + + if(adapter->hw.media_type == em_media_type_copper || + (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) { + adapter->stats.symerrs += E1000_READ_REG(&adapter->hw, SYMERRS); + adapter->stats.sec += E1000_READ_REG(&adapter->hw, SEC); + } + adapter->stats.crcerrs += E1000_READ_REG(&adapter->hw, CRCERRS); + adapter->stats.mpc += E1000_READ_REG(&adapter->hw, MPC); + adapter->stats.scc += E1000_READ_REG(&adapter->hw, SCC); + adapter->stats.ecol += E1000_READ_REG(&adapter->hw, ECOL); + + adapter->stats.mcc += E1000_READ_REG(&adapter->hw, MCC); + adapter->stats.latecol += E1000_READ_REG(&adapter->hw, LATECOL); + adapter->stats.colc += E1000_READ_REG(&adapter->hw, COLC); + adapter->stats.dc += E1000_READ_REG(&adapter->hw, DC); + adapter->stats.rlec += E1000_READ_REG(&adapter->hw, RLEC); + adapter->stats.xonrxc += E1000_READ_REG(&adapter->hw, XONRXC); + adapter->stats.xontxc += E1000_READ_REG(&adapter->hw, XONTXC); + adapter->stats.xoffrxc += E1000_READ_REG(&adapter->hw, XOFFRXC); + adapter->stats.xofftxc += E1000_READ_REG(&adapter->hw, XOFFTXC); + adapter->stats.fcruc += E1000_READ_REG(&adapter->hw, FCRUC); + adapter->stats.prc64 += E1000_READ_REG(&adapter->hw, PRC64); + adapter->stats.prc127 += E1000_READ_REG(&adapter->hw, PRC127); + adapter->stats.prc255 += E1000_READ_REG(&adapter->hw, PRC255); + adapter->stats.prc511 += E1000_READ_REG(&adapter->hw, PRC511); + adapter->stats.prc1023 += E1000_READ_REG(&adapter->hw, PRC1023); + adapter->stats.prc1522 += E1000_READ_REG(&adapter->hw, PRC1522); + adapter->stats.gprc += E1000_READ_REG(&adapter->hw, GPRC); + adapter->stats.bprc += E1000_READ_REG(&adapter->hw, BPRC); + adapter->stats.mprc += E1000_READ_REG(&adapter->hw, MPRC); + adapter->stats.gptc += E1000_READ_REG(&adapter->hw, GPTC); + + /* For the 64-bit byte counters the low dword must be read first. */ + /* Both registers clear on the read of the high dword */ + + adapter->stats.gorcl += E1000_READ_REG(&adapter->hw, GORCL); + adapter->stats.gorch += E1000_READ_REG(&adapter->hw, GORCH); + adapter->stats.gotcl += E1000_READ_REG(&adapter->hw, GOTCL); + adapter->stats.gotch += E1000_READ_REG(&adapter->hw, GOTCH); + + adapter->stats.rnbc += E1000_READ_REG(&adapter->hw, RNBC); + adapter->stats.ruc += E1000_READ_REG(&adapter->hw, RUC); + adapter->stats.rfc += E1000_READ_REG(&adapter->hw, RFC); + adapter->stats.roc += E1000_READ_REG(&adapter->hw, ROC); + adapter->stats.rjc += E1000_READ_REG(&adapter->hw, RJC); + + adapter->stats.torl += E1000_READ_REG(&adapter->hw, TORL); + adapter->stats.torh += E1000_READ_REG(&adapter->hw, TORH); + adapter->stats.totl += E1000_READ_REG(&adapter->hw, TOTL); + adapter->stats.toth += E1000_READ_REG(&adapter->hw, TOTH); + + adapter->stats.tpr += E1000_READ_REG(&adapter->hw, TPR); + adapter->stats.tpt += E1000_READ_REG(&adapter->hw, TPT); + adapter->stats.ptc64 += E1000_READ_REG(&adapter->hw, PTC64); + adapter->stats.ptc127 += E1000_READ_REG(&adapter->hw, PTC127); + adapter->stats.ptc255 += E1000_READ_REG(&adapter->hw, PTC255); + adapter->stats.ptc511 += E1000_READ_REG(&adapter->hw, PTC511); + adapter->stats.ptc1023 += E1000_READ_REG(&adapter->hw, PTC1023); + adapter->stats.ptc1522 += E1000_READ_REG(&adapter->hw, PTC1522); + adapter->stats.mptc += E1000_READ_REG(&adapter->hw, MPTC); + adapter->stats.bptc += E1000_READ_REG(&adapter->hw, BPTC); + + if (adapter->hw.mac_type >= em_82543) { + adapter->stats.algnerrc += + E1000_READ_REG(&adapter->hw, ALGNERRC); + adapter->stats.rxerrc += + E1000_READ_REG(&adapter->hw, RXERRC); + adapter->stats.tncrs += + E1000_READ_REG(&adapter->hw, TNCRS); + adapter->stats.cexterr += + E1000_READ_REG(&adapter->hw, CEXTERR); + adapter->stats.tsctc += + E1000_READ_REG(&adapter->hw, TSCTC); + adapter->stats.tsctfc += + E1000_READ_REG(&adapter->hw, TSCTFC); + } + ifp = &adapter->arpcom.ac_if; + + /* Fill out the OS statistics structure */ + ifp->if_ibytes = adapter->stats.gorcl; + ifp->if_obytes = adapter->stats.gotcl; + ifp->if_imcasts = adapter->stats.mprc; + ifp->if_collisions = adapter->stats.colc; + + /* Rx Errors */ + ifp->if_ierrors = + adapter->dropped_pkts + + adapter->stats.rxerrc + + adapter->stats.crcerrs + + adapter->stats.algnerrc + + adapter->stats.rlec + + adapter->stats.mpc + adapter->stats.cexterr; + + /* Tx Errors */ + ifp->if_oerrors = adapter->stats.ecol + adapter->stats.latecol; + +} + +#ifndef __rtems__ +/********************************************************************** + * + * This routine is called only when em_display_debug_stats is enabled. + * This routine provides a way to take a look at important statistics + * maintained by the driver and hardware. + * + **********************************************************************/ +static void +em_print_debug_info(struct adapter *adapter) +{ + int unit = adapter->unit; + uint8_t *hw_addr = adapter->hw.hw_addr; + + printf("em%d: Adapter hardware address = %p \n", unit, hw_addr); + printf("em%d:CTRL = 0x%x\n", unit, + E1000_READ_REG(&adapter->hw, CTRL)); + printf("em%d:RCTL = 0x%x PS=(0x8402)\n", unit, + E1000_READ_REG(&adapter->hw, RCTL)); + printf("em%d:tx_int_delay = %d, tx_abs_int_delay = %d\n", unit, + E1000_READ_REG(&adapter->hw, TIDV), + E1000_READ_REG(&adapter->hw, TADV)); + printf("em%d:rx_int_delay = %d, rx_abs_int_delay = %d\n", unit, + E1000_READ_REG(&adapter->hw, RDTR), + E1000_READ_REG(&adapter->hw, RADV)); + printf("em%d: fifo workaround = %lld, fifo_reset = %lld\n", unit, + (long long)adapter->tx_fifo_wrk_cnt, + (long long)adapter->tx_fifo_reset_cnt); + printf("em%d: hw tdh = %d, hw tdt = %d\n", unit, + E1000_READ_REG(&adapter->hw, TDH), + E1000_READ_REG(&adapter->hw, TDT)); + printf("em%d: Num Tx descriptors avail = %d\n", unit, + adapter->num_tx_desc_avail); + printf("em%d: Tx Descriptors not avail1 = %ld\n", unit, + adapter->no_tx_desc_avail1); + printf("em%d: Tx Descriptors not avail2 = %ld\n", unit, + adapter->no_tx_desc_avail2); + printf("em%d: Std mbuf failed = %ld\n", unit, + adapter->mbuf_alloc_failed); + printf("em%d: Std mbuf cluster failed = %ld\n", unit, + adapter->mbuf_cluster_failed); + printf("em%d: Driver dropped packets = %ld\n", unit, + adapter->dropped_pkts); + + return; +} +#endif + +static void +em_print_hw_stats(struct adapter *adapter) +{ + int unit = adapter->unit; + + printf("em%d: Excessive collisions = %lld\n", unit, + (long long)adapter->stats.ecol); + printf("em%d: Symbol errors = %lld\n", unit, + (long long)adapter->stats.symerrs); + printf("em%d: Sequence errors = %lld\n", unit, + (long long)adapter->stats.sec); + printf("em%d: Defer count = %lld\n", unit, + (long long)adapter->stats.dc); + + printf("em%d: Missed Packets = %lld\n", unit, + (long long)adapter->stats.mpc); + printf("em%d: Receive No Buffers = %lld\n", unit, + (long long)adapter->stats.rnbc); + printf("em%d: Receive length errors = %lld\n", unit, + (long long)adapter->stats.rlec); + printf("em%d: Receive errors = %lld\n", unit, + (long long)adapter->stats.rxerrc); + printf("em%d: Crc errors = %lld\n", unit, + (long long)adapter->stats.crcerrs); + printf("em%d: Alignment errors = %lld\n", unit, + (long long)adapter->stats.algnerrc); + printf("em%d: Carrier extension errors = %lld\n", unit, + (long long)adapter->stats.cexterr); + + printf("em%d: XON Rcvd = %lld\n", unit, + (long long)adapter->stats.xonrxc); + printf("em%d: XON Xmtd = %lld\n", unit, + (long long)adapter->stats.xontxc); + printf("em%d: XOFF Rcvd = %lld\n", unit, + (long long)adapter->stats.xoffrxc); + printf("em%d: XOFF Xmtd = %lld\n", unit, + (long long)adapter->stats.xofftxc); + + printf("em%d: Good Packets Rcvd = %lld\n", unit, + (long long)adapter->stats.gprc); + printf("em%d: Good Packets Xmtd = %lld\n", unit, + (long long)adapter->stats.gptc); + + return; +} + +#ifndef __rtems__ +static int +em_sysctl_debug_info(SYSCTL_HANDLER_ARGS) +{ + int error; + int result; + struct adapter *adapter; + + result = -1; + error = sysctl_handle_int(oidp, &result, 0, req); + + if (error || !req->newptr) + return (error); + + if (result == 1) { + adapter = (struct adapter *)arg1; + em_print_debug_info(adapter); + } + + return error; +} + +static int +em_sysctl_stats(SYSCTL_HANDLER_ARGS) +{ + int error; + int result; + struct adapter *adapter; + + result = -1; + error = sysctl_handle_int(oidp, &result, 0, req); + + if (error || !req->newptr) + return (error); + + if (result == 1) { + adapter = (struct adapter *)arg1; + em_print_hw_stats(adapter); + } + + return error; +} + +static int +em_sysctl_int_delay(SYSCTL_HANDLER_ARGS) +{ + struct em_int_delay_info *info; + struct adapter *adapter; + u_int32_t regval; + int error; + int usecs; + int ticks; + int s; + + info = (struct em_int_delay_info *)arg1; + adapter = info->adapter; + usecs = info->value; + error = sysctl_handle_int(oidp, &usecs, 0, req); + if (error != 0 || req->newptr == NULL) + return error; + if (usecs < 0 || usecs > E1000_TICKS_TO_USECS(65535)) + return EINVAL; + info->value = usecs; + ticks = E1000_USECS_TO_TICKS(usecs); + + s = splimp(); + regval = E1000_READ_OFFSET(&adapter->hw, info->offset); + regval = (regval & ~0xffff) | (ticks & 0xffff); + /* Handle a few special cases. */ + switch (info->offset) { + case E1000_RDTR: + case E1000_82542_RDTR: + regval |= E1000_RDT_FPDB; + break; + case E1000_TIDV: + case E1000_82542_TIDV: + if (ticks == 0) { + adapter->txd_cmd &= ~E1000_TXD_CMD_IDE; + /* Don't write 0 into the TIDV register. */ + regval++; + } else + adapter->txd_cmd |= E1000_TXD_CMD_IDE; + break; + } + E1000_WRITE_OFFSET(&adapter->hw, info->offset, regval); + splx(s); + return 0; +} + +static void +em_add_int_delay_sysctl(struct adapter *adapter, const char *name, + const char *description, struct em_int_delay_info *info, + int offset, int value) +{ + info->adapter = adapter; + info->offset = offset; + info->value = value; + SYSCTL_ADD_PROC(device_get_sysctl_ctx(adapter->dev), + SYSCTL_CHILDREN(device_get_sysctl_tree(adapter->dev)), + OID_AUTO, name, CTLTYPE_INT|CTLFLAG_RW, + info, 0, em_sysctl_int_delay, "I", description); +} +#endif + +#ifdef __rtems__ +/* Initialize bare minimals so we can check the phy link status */ +int +em_hw_early_init(device_t dev) +{ +struct adapter *adapter = device_get_softc(dev); + adapter->dev = dev; + adapter->osdep.dev = dev; + em_identify_hardware(adapter); + return em_allocate_pci_resources(adapter); +} +#endif |