1 files changed, 67 insertions, 0 deletions
diff --git a/bsps/include/dev/spi/xilinx-axi-spi.h b/bsps/include/dev/spi/xilinx-axi-spi.h
new file mode 100644
index 0000000000..1f5e2a9989
--- /dev/null
+++ b/bsps/include/dev/spi/xilinx-axi-spi.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: BSD-2-Clause */
+
+/*
+ * Copyright (C) 2021 Jan Sommer, German Aerospace Center (DLR)
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef LIBBSP_ARM_XILINX_AXI_SPI_H
+#define LIBBSP_ARM_XILINX_AXI_SPI_H
+
+#include <rtems.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/** 
+ * Register Xilinx AXI SPI device
+ *
+ * Note:
+ *   The Xilinx Quad SPI device is very versatile and
+ *   supports many options. This driver assumes the 
+ *   following setup:
+ *     - Standard SPI mode and AXI Lite interface
+ *     - FIFO available (driver might also work without FIFOs)
+ *
+ * @param bus_path path for the new device node (e.g. "/dev/spi0")
+ * @param register_base base address of the device
+ * @param fifo_size Configured fifo size. Either 0, 16 or 256
+ * @param num_cs Number of configured CS lines (0-32)
+ *
+ * @return 0 on success. Negative number otherwise.
+ *
+ */
+int spi_bus_register_xilinx_axi(
+  const char *bus_path,
+  uintptr_t register_base,
+  uint32_t fifo_size,
+  uint32_t num_cs,
+  rtems_vector_number irq
+);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* LIBBSP_ARM_XILINX_AXI_SPI_H */