/**
* @file
*
* @brief Configuration Table Template that will be Instantiated
* by an Application
*
* This include file contains the configuration table template that will
* be instantiated by an application based on the setting of a number
* of macros. The macros are documented in the Configuring a System
* chapter of the Classic API User's Guide
*/
/*
* COPYRIGHT (c) 1989-2015.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#ifndef __CONFIGURATION_TEMPLATE_h
#define __CONFIGURATION_TEMPLATE_h
/*
* Include the executive's configuration
*/
#include <rtems.h>
#include <rtems/ioimpl.h>
#include <rtems/sysinit.h>
#include <rtems/score/apimutex.h>
#include <rtems/score/percpu.h>
#include <rtems/score/userextimpl.h>
#include <rtems/score/wkspace.h>
#include <rtems/posix/key.h>
#include <rtems/posix/mqueue.h>
#include <rtems/posix/pthread.h>
#include <rtems/posix/semaphore.h>
#include <rtems/posix/shm.h>
#include <limits.h>
#ifdef CONFIGURE_DISABLE_BSP_SETTINGS
#undef BSP_DEFAULT_UNIFIED_WORK_AREAS
#undef BSP_IDLE_TASK_BODY
#undef BSP_IDLE_TASK_STACK_SIZE
#undef BSP_INITIAL_EXTENSION
#undef BSP_INTERRUPT_STACK_SIZE
#undef BSP_MAXIMUM_DEVICES
#undef BSP_ZERO_WORKSPACE_AUTOMATICALLY
#undef CONFIGURE_BSP_PREREQUISITE_DRIVERS
#undef CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK
#else
#include <bsp.h>
#endif
#ifdef RTEMS_NEWLIB
#include <sys/reent.h>
#endif
#ifdef __cplusplus
extern "C" {
#endif
/*
* Internal defines must be prefixed with _CONFIGURE to distinguish them from
* user-provided options which use a CONFIGURE prefix.
*/
/**
* @defgroup Configuration RTEMS Configuration
*
* This module contains all RTEMS Configuration parameters.
*
* The model is to estimate the memory required for each configured item
* and sum those estimates. The estimate can be too high or too low for
* a variety of reasons:
*
* Reasons estimate is too high:
* + FP contexts (not all tasks are FP)
*
* Reasons estimate is too low:
* + stacks greater than minimum size
* + messages
* + application must account for device driver resources
* + application must account for add-on library resource requirements
*
* NOTE: Eventually this may be able to take into account some of
* the above. This procedure has evolved from just enough to
* support the RTEMS Test Suites into something that can be
* used remarkably reliably by most applications.
*/
/**
* This is the Classic API initialization tasks table.
*/
extern rtems_initialization_tasks_table Initialization_tasks[];
#if defined(RTEMS_MULTIPROCESSING)
/**
* This it the distributed multiprocessing configuration table.
*/
extern rtems_multiprocessing_table Multiprocessing_configuration;
#endif
/**
* This macro determines whether the RTEMS reentrancy support for
* the Newlib C Library is enabled.
*/
#ifdef RTEMS_SCHEDSIM
#undef RTEMS_NEWLIB
#endif
#if (defined(RTEMS_NEWLIB) && !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY))
#define _CONFIGURE_NEWLIB_EXTENSION 1
#else
#define _CONFIGURE_NEWLIB_EXTENSION 0
#endif
#ifndef RTEMS_SCHEDSIM
#include <rtems/libio_.h>
#ifdef CONFIGURE_INIT
#ifndef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM
RTEMS_SYSINIT_ITEM(
rtems_filesystem_initialize,
RTEMS_SYSINIT_ROOT_FILESYSTEM,
RTEMS_SYSINIT_ORDER_MIDDLE
);
#endif
#endif
#endif
/**
* This macro defines the number of POSIX file descriptors allocated
* and managed by libio. These are the "integer" file descriptors that
* are used by calls like open(2) and read(2).
*/
#ifndef CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS
#define CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS 3
#endif
/*
* POSIX key count used by the IO library.
*/
#define _CONFIGURE_LIBIO_POSIX_KEYS 1
#ifdef CONFIGURE_INIT
rtems_libio_t rtems_libio_iops[CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS];
/**
* When instantiating the configuration tables, this variable is
* initialized to specify the maximum number of file descriptors.
*/
const uint32_t rtems_libio_number_iops = RTEMS_ARRAY_SIZE(rtems_libio_iops);
#endif
#ifdef CONFIGURE_SMP_MAXIMUM_PROCESSORS
#warning "CONFIGURE_SMP_MAXIMUM_PROCESSORS has been renamed to CONFIGURE_MAXIMUM_PROCESSORS since RTEMS 5.1"
#define CONFIGURE_MAXIMUM_PROCESSORS CONFIGURE_SMP_MAXIMUM_PROCESSORS
#endif
/* Ensure that _CONFIGURE_MAXIMUM_PROCESSORS > 1 only in SMP configurations */
#if defined(CONFIGURE_MAXIMUM_PROCESSORS) && defined(RTEMS_SMP)
#define _CONFIGURE_MAXIMUM_PROCESSORS CONFIGURE_MAXIMUM_PROCESSORS
#else
#define _CONFIGURE_MAXIMUM_PROCESSORS 1
#endif
/*
* An internal define to indicate that this is an SMP application
* configuration.
*/
#ifdef RTEMS_SMP
#if !defined(CONFIGURE_DISABLE_SMP_CONFIGURATION)
#define _CONFIGURE_SMP_APPLICATION
#elif _CONFIGURE_MAXIMUM_PROCESSORS > 1
#error "CONFIGURE_DISABLE_SMP_CONFIGURATION and CONFIGURE_MAXIMUM_PROCESSORS > 1 makes no sense"
#endif
#endif
#ifdef CONFIGURE_SMP_APPLICATION
#warning "CONFIGURE_SMP_APPLICATION is obsolete since RTEMS 5.1"
#endif
/*
* This sets up the resources for the FIFOs/pipes.
*/
/**
* This is specified to configure the maximum number of POSIX FIFOs.
*/
#if !defined(CONFIGURE_MAXIMUM_FIFOS)
#define CONFIGURE_MAXIMUM_FIFOS 0
#endif
/**
* This is specified to configure the maximum number of POSIX named pipes.
*/
#if !defined(CONFIGURE_MAXIMUM_PIPES)
#define CONFIGURE_MAXIMUM_PIPES 0
#endif
/*
* This specifies the number of barriers required for the configured
* number of FIFOs and named pipes.
*/
#if CONFIGURE_MAXIMUM_FIFOS > 0 || CONFIGURE_MAXIMUM_PIPES > 0
#define _CONFIGURE_BARRIERS_FOR_FIFOS \
(2 * (CONFIGURE_MAXIMUM_FIFOS + CONFIGURE_MAXIMUM_PIPES))
#else
#define _CONFIGURE_BARRIERS_FOR_FIFOS 0
#endif
/**
* @defgroup ConfigFilesystems Filesystems and Mount Table Configuration
*
* @ingroup Configuration
*
* Defines to control the file system:
*
* - CONFIGURE_APPLICATION_DISABLE_FILESYSTEM:
* Disable the RTEMS filesystems. You get an empty DEVFS.
*
* - CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM:
* Use the DEVFS as the root file system. Limited functions are
* provided when this is used.
*
* - CONFIGURE_FILESYSTEM_ALL:
* Add file filesystems to the default filesystem table.
*
* List of available file systems. You can define as many as you like:
* - CONFIGURE_FILESYSTEM_IMFS - In Memory File System (IMFS)
* - CONFIGURE_FILESYSTEM_DEVFS - Device File System (DSVFS)
* - CONFIGURE_FILESYSTEM_TFTPFS - TFTP File System, networking enabled
* - CONFIGURE_FILESYSTEM_FTPFS - FTP File System, networking enabled
* - CONFIGURE_FILESYSTEM_NFS - Network File System, networking enabled
* - CONFIGURE_FILESYSTEM_DOSFS - DOS File System, uses libblock
* - CONFIGURE_FILESYSTEM_RFS - RTEMS File System (RFS), uses libblock
* - CONFIGURE_FILESYSTEM_JFFS2 - Journalling Flash File System, Version 2
*
* Combinations:
*
* - If nothing is defined the base file system is the IMFS.
*
* - If CONFIGURE_APPLICATION_DISABLE_FILESYSTEM is defined all filesystems
* are disabled by force.
*
* - If CONFIGURE_USE_DEV_AS_BASE_FILESYSTEM is defined all filesystems
* are disabled by force and DEVFS is defined.
*/
/**@{*/
#ifdef CONFIGURE_INIT
/*
* Include all file systems. Do this before checking if the filesystem has
* been disabled.
*/
#ifdef CONFIGURE_FILESYSTEM_ALL
#define CONFIGURE_FILESYSTEM_IMFS
#define CONFIGURE_FILESYSTEM_DEVFS
#define CONFIGURE_FILESYSTEM_TFTPFS
#define CONFIGURE_FILESYSTEM_FTPFS
#define CONFIGURE_FILESYSTEM_NFS
#define CONFIGURE_FILESYSTEM_DOSFS
#define CONFIGURE_FILESYSTEM_RFS
#define CONFIGURE_FILESYSTEM_JFFS2
#endif
/*
* If disabling the file system, give a compile error if the user has
* configured other filesystem parameters.
*/
#if defined(CONFIGURE_APPLICATION_DISABLE_FILESYSTEM)
#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
#error "Filesystem disabled and a base filesystem configured."
#endif
#if defined(CONFIGURE_FILESYSTEM_IMFS) || \
defined(CONFIGURE_FILESYSTEM_DEVFS) || \
defined(CONFIGURE_FILESYSTEM_TFTPFS) || \
defined(CONFIGURE_FILESYSTEM_FTPFS) || \
defined(CONFIGURE_FILESYSTEM_NFS) || \
defined(CONFIGURE_FILESYSTEM_DOSFS) || \
defined(CONFIGURE_FILESYSTEM_RFS) || \
defined(CONFIGURE_FILESYSTEM_JFFS2)
#error "Filesystem disabled and a filesystem configured."
#endif
#endif
/*
* If the base filesystem is DEVFS define it else define IMFS.
* We will have either DEVFS or IMFS defined after this.
*/
#if !defined(CONFIGURE_APPLICATION_DISABLE_FILESYSTEM)
#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
#define CONFIGURE_FILESYSTEM_DEVFS
#endif
#endif
#endif
#ifndef RTEMS_SCHEDSIM
/**
* IMFS
*/
#include <rtems/imfs.h>
/**
* This specifies the number of bytes per block for files within the IMFS.
* There are a maximum number of blocks per file so this dictates the maximum
* size of a file. This has to be balanced with the unused portion of each
* block that might be wasted.
*/
#ifndef CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK
#define CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK \
IMFS_MEMFILE_DEFAULT_BYTES_PER_BLOCK
#endif
/**
* This defines the IMFS file system table entry.
*/
#if !defined(CONFIGURE_FILESYSTEM_ENTRY_IMFS) && \
defined(CONFIGURE_FILESYSTEM_IMFS)
#define CONFIGURE_FILESYSTEM_ENTRY_IMFS \
{ RTEMS_FILESYSTEM_TYPE_IMFS, IMFS_initialize }
#endif
#endif
#ifdef CONFIGURE_USE_MINIIMFS_AS_BASE_FILESYSTEM
#define CONFIGURE_IMFS_DISABLE_CHMOD
#define CONFIGURE_IMFS_DISABLE_CHOWN
#define CONFIGURE_IMFS_DISABLE_UTIME
#define CONFIGURE_IMFS_DISABLE_LINK
#define CONFIGURE_IMFS_DISABLE_SYMLINK
#define CONFIGURE_IMFS_DISABLE_READLINK
#define CONFIGURE_IMFS_DISABLE_RENAME
#define CONFIGURE_IMFS_DISABLE_UNMOUNT
#endif
/**
* DEVFS
*/
#if !defined(CONFIGURE_FILESYSTEM_ENTRY_DEVFS) && \
defined(CONFIGURE_FILESYSTEM_DEVFS)
#include <rtems/devfs.h>
#define CONFIGURE_FILESYSTEM_ENTRY_DEVFS \
{ RTEMS_FILESYSTEM_TYPE_DEVFS, devFS_initialize }
#endif
/**
* FTPFS
*/
#if !defined(CONFIGURE_FILESYSTEM_ENTRY_FTPFS) && \
defined(CONFIGURE_FILESYSTEM_FTPFS)
#include <rtems/ftpfs.h>
#define CONFIGURE_FILESYSTEM_ENTRY_FTPFS \
{ RTEMS_FILESYSTEM_TYPE_FTPFS, rtems_ftpfs_initialize }
#endif
/**
* TFTPFS
*/
#if !defined(CONFIGURE_FILESYSTEM_ENTRY_TFTPFS) && \
defined(CONFIGURE_FILESYSTEM_TFTPFS)
#include <rtems/tftp.h>
#define CONFIGURE_FILESYSTEM_ENTRY_TFTPFS \
{ RTEMS_FILESYSTEM_TYPE_TFTPFS, rtems_tftpfs_initialize }
#endif
/**
* NFS
*/
#if !defined(CONFIGURE_FILESYSTEM_ENTRY_NFS) && \
defined(CONFIGURE_FILESYSTEM_NFS)
#include <librtemsNfs.h>
#define CONFIGURE_FILESYSTEM_ENTRY_NFS \
{ RTEMS_FILESYSTEM_TYPE_NFS, rtems_nfs_initialize }
#endif
/**
* DOSFS
*/
#if !defined(CONFIGURE_FILESYSTEM_ENTRY_DOSFS) && \
defined(CONFIGURE_FILESYSTEM_DOSFS)
#include <rtems/dosfs.h>
#define CONFIGURE_FILESYSTEM_ENTRY_DOSFS \
{ RTEMS_FILESYSTEM_TYPE_DOSFS, rtems_dosfs_initialize }
#endif
/**
* RFS
*/
#if !defined(CONFIGURE_FILESYSTEM_ENTRY_RFS) && \
defined(CONFIGURE_FILESYSTEM_RFS)
#include <rtems/rtems-rfs.h>
#define CONFIGURE_FILESYSTEM_ENTRY_RFS \
{ RTEMS_FILESYSTEM_TYPE_RFS, rtems_rfs_rtems_initialise }
#endif
/**
* JFFS2
*/
#if !defined(CONFIGURE_FILESYSTEM_ENTRY_JFFS2) && \
defined(CONFIGURE_FILESYSTEM_JFFS2)
#include <rtems/jffs2.h>
#define CONFIGURE_FILESYSTEM_ENTRY_JFFS2 \
{ RTEMS_FILESYSTEM_TYPE_JFFS2, rtems_jffs2_initialize }
#endif
#ifdef CONFIGURE_INIT
/**
* DEVFS variables.
*
* The number of individual devices that may be registered
* in the system or the CONFIGURE_MAXIMUM_DEVICES variable
* is defaulted to 4 when a filesystem is enabled, unless
* the bsp overwrides this. In which case the value is set
* to BSP_MAXIMUM_DEVICES.
*/
#ifdef CONFIGURE_FILESYSTEM_DEVFS
#ifndef CONFIGURE_MAXIMUM_DEVICES
#if defined(BSP_MAXIMUM_DEVICES)
#define CONFIGURE_MAXIMUM_DEVICES BSP_MAXIMUM_DEVICES
#else
#define CONFIGURE_MAXIMUM_DEVICES 4
#endif
#endif
#include <rtems/devfs.h>
#endif
/**
* Table termination record.
*/
#define CONFIGURE_FILESYSTEM_NULL { NULL, NULL }
#ifndef RTEMS_SCHEDSIM
#if !defined(CONFIGURE_APPLICATION_DISABLE_FILESYSTEM) && \
!defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
int imfs_rq_memfile_bytes_per_block =
CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK;
#endif
/**
* The default file system table. Must be terminated with the NULL entry if
* you provide your own.
*/
#ifndef CONFIGURE_APPLICATION_DISABLE_FILESYSTEM
const rtems_filesystem_table_t rtems_filesystem_table[] = {
#if !defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
{ "/", IMFS_initialize_support },
#endif
#if defined(CONFIGURE_FILESYSTEM_IMFS) && \
defined(CONFIGURE_FILESYSTEM_ENTRY_IMFS)
CONFIGURE_FILESYSTEM_ENTRY_IMFS,
#endif
#if defined(CONFIGURE_FILESYSTEM_DEVFS) && \
defined(CONFIGURE_FILESYSTEM_ENTRY_DEVFS)
CONFIGURE_FILESYSTEM_ENTRY_DEVFS,
#endif
#if defined(CONFIGURE_FILESYSTEM_TFTPFS) && \
defined(CONFIGURE_FILESYSTEM_ENTRY_TFTPFS)
CONFIGURE_FILESYSTEM_ENTRY_TFTPFS,
#endif
#if defined(CONFIGURE_FILESYSTEM_FTPFS) && \
defined(CONFIGURE_FILESYSTEM_ENTRY_FTPFS)
CONFIGURE_FILESYSTEM_ENTRY_FTPFS,
#endif
#if defined(CONFIGURE_FILESYSTEM_NFS) && \
defined(CONFIGURE_FILESYSTEM_ENTRY_NFS)
CONFIGURE_FILESYSTEM_ENTRY_NFS,
#endif
#if defined(CONFIGURE_FILESYSTEM_DOSFS) && \
defined(CONFIGURE_FILESYSTEM_ENTRY_DOSFS)
CONFIGURE_FILESYSTEM_ENTRY_DOSFS,
#endif
#if defined(CONFIGURE_FILESYSTEM_RFS) && \
defined(CONFIGURE_FILESYSTEM_ENTRY_RFS)
CONFIGURE_FILESYSTEM_ENTRY_RFS,
#endif
#if defined(CONFIGURE_FILESYSTEM_JFFS2) && \
defined(CONFIGURE_FILESYSTEM_ENTRY_JFFS2)
CONFIGURE_FILESYSTEM_ENTRY_JFFS2,
#endif
CONFIGURE_FILESYSTEM_NULL
};
#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
static devFS_node devFS_root_filesystem_nodes [CONFIGURE_MAXIMUM_DEVICES];
static const devFS_data devFS_root_filesystem_data = {
devFS_root_filesystem_nodes,
CONFIGURE_MAXIMUM_DEVICES
};
#else
static IMFS_fs_info_t _Configure_IMFS_fs_info;
static const rtems_filesystem_operations_table _Configure_IMFS_ops = {
rtems_filesystem_default_lock,
rtems_filesystem_default_unlock,
IMFS_eval_path,
#ifdef CONFIGURE_IMFS_DISABLE_LINK
rtems_filesystem_default_link,
#else
IMFS_link,
#endif
rtems_filesystem_default_are_nodes_equal,
#ifdef CONFIGURE_IMFS_DISABLE_MKNOD
rtems_filesystem_default_mknod,
#else
IMFS_mknod,
#endif
#ifdef CONFIGURE_IMFS_DISABLE_RMNOD
rtems_filesystem_default_rmnod,
#else
IMFS_rmnod,
#endif
#ifdef CONFIGURE_IMFS_DISABLE_CHMOD
rtems_filesystem_default_fchmod,
#else
IMFS_fchmod,
#endif
#ifdef CONFIGURE_IMFS_DISABLE_CHOWN
rtems_filesystem_default_chown,
#else
IMFS_chown,
#endif
IMFS_node_clone,
IMFS_node_free,
#ifdef CONFIGURE_IMFS_DISABLE_MOUNT
rtems_filesystem_default_mount,
#else
IMFS_mount,
#endif
#ifdef CONFIGURE_IMFS_DISABLE_UNMOUNT
rtems_filesystem_default_unmount,
#else
IMFS_unmount,
#endif
rtems_filesystem_default_fsunmount,
#ifdef CONFIGURE_IMFS_DISABLE_UTIME
rtems_filesystem_default_utime,
#else
IMFS_utime,
#endif
#ifdef CONFIGURE_IMFS_DISABLE_SYMLINK
rtems_filesystem_default_symlink,
#else
IMFS_symlink,
#endif
#ifdef CONFIGURE_IMFS_DISABLE_READLINK
rtems_filesystem_default_readlink,
#else
IMFS_readlink,
#endif
#ifdef CONFIGURE_IMFS_DISABLE_RENAME
rtems_filesystem_default_rename,
#else
IMFS_rename,
#endif
rtems_filesystem_default_statvfs
};
static const IMFS_mknod_controls _Configure_IMFS_mknod_controls = {
#ifdef CONFIGURE_IMFS_DISABLE_READDIR
&IMFS_mknod_control_dir_minimal,
#else
&IMFS_mknod_control_dir_default,
#endif
&IMFS_mknod_control_device,
#ifdef CONFIGURE_IMFS_DISABLE_MKNOD_FILE
&IMFS_mknod_control_enosys,
#else
&IMFS_mknod_control_memfile,
#endif
#if CONFIGURE_MAXIMUM_FIFOS > 0 || CONFIGURE_MAXIMUM_PIPES > 0
&IMFS_mknod_control_fifo
#else
&IMFS_mknod_control_enosys
#endif
};
static const IMFS_mount_data _Configure_IMFS_mount_data = {
&_Configure_IMFS_fs_info,
&_Configure_IMFS_ops,
&_Configure_IMFS_mknod_controls
};
#endif
const rtems_filesystem_mount_configuration
rtems_filesystem_root_configuration = {
NULL,
NULL,
#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
RTEMS_FILESYSTEM_TYPE_DEVFS,
#else
"/",
#endif
RTEMS_FILESYSTEM_READ_WRITE,
#if defined(CONFIGURE_USE_DEVFS_AS_BASE_FILESYSTEM)
&devFS_root_filesystem_data
#else
&_Configure_IMFS_mount_data
#endif
};
#endif
#endif
#endif
/**@}*/ /* end of file system group */
/*
* STACK_CHECKER_ON was still available in 4.9 so give a warning for now.
*/
#if defined(STACK_CHECKER_ON)
#define CONFIGURE_STACK_CHECKER_ENABLED
#warning "STACK_CHECKER_ON deprecated -- use CONFIGURE_STACK_CHECKER_ENABLED"
#endif
/**
* This configures the stack checker user extension.
*/
#ifdef CONFIGURE_STACK_CHECKER_ENABLED
#define _CONFIGURE_STACK_CHECKER_EXTENSION 1
#else
#define _CONFIGURE_STACK_CHECKER_EXTENSION 0
#endif
/**
* @brief Maximum priority configuration.
*
* This configures the maximum priority value that
* a task may have.
*
* The following applies to the data space requirements
* of the Priority Scheduler.
*
* By reducing the number of priorities in a system,
* the amount of RAM required by RTEMS can be significantly
* reduced. RTEMS allocates a Chain_Control structure per
* priority and this structure contains 3 pointers. So
* the default is (256 * 12) = 3K on 32-bit architectures.
*
* This must be one less than a power of 2 between
* 4 and 256. Valid values along with the application
* priority levels and memory saved when pointers are
* 32-bits in size are:
*
* + 3, 2 application priorities, 3024 bytes saved
* + 7, 5 application priorities, 2976 bytes saved
* + 15, 13 application priorities, 2880 bytes saved
* + 31, 29 application priorities, 2688 bytes saved
* + 63, 61 application priorities, 2304 bytes saved
* + 127, 125 application priorities, 1536 bytes saved
* + 255, 253 application priorities, 0 bytes saved
*
* It is specified in terms of Classic API priority values.
*/
#ifndef CONFIGURE_MAXIMUM_PRIORITY
#define CONFIGURE_MAXIMUM_PRIORITY PRIORITY_DEFAULT_MAXIMUM
#endif
/**
* @defgroup ConfigScheduler Scheduler configuration
*
* @ingroup Configuration
*
* The scheduler configuration allows an application to select the
* scheduling policy to use. The supported configurations are:
*
* - CONFIGURE_SCHEDULER_PRIORITY - Deterministic Priority Scheduler
* - CONFIGURE_SCHEDULER_PRIORITY_SMP - Deterministic Priority SMP Scheduler
* - CONFIGURE_SCHEDULER_PRIORITY_AFFINITY_SMP - Deterministic
* Priority SMP Affinity Scheduler
* - CONFIGURE_SCHEDULER_STRONG_APA - Strong APA Scheduler
* - CONFIGURE_SCHEDULER_SIMPLE - Light-weight Priority Scheduler
* - CONFIGURE_SCHEDULER_SIMPLE_SMP - Simple SMP Priority Scheduler
* - CONFIGURE_SCHEDULER_EDF - EDF Scheduler
* - CONFIGURE_SCHEDULER_EDF_SMP - EDF SMP Scheduler
* - CONFIGURE_SCHEDULER_CBS - CBS Scheduler
* - CONFIGURE_SCHEDULER_USER - user provided scheduler
*
* If no configuration is specified by the application in a uniprocessor
* configuration, then CONFIGURE_SCHEDULER_PRIORITY is the default.
*
* If no configuration is specified by the application in SMP
* configuration, then CONFIGURE_SCHEDULER_PRIORITY_SMP is the default.
*
* An application can define its own scheduling policy by defining
* CONFIGURE_SCHEDULER_USER and the following:
*
* - CONFIGURE_SCHEDULER
* - CONFIGURE_SCHEDULER_TABLE_ENTRIES
* - CONFIGURE_SCHEDULER_USER_PER_THREAD
*/
#ifdef CONFIGURE_SCHEDULER_CONTEXT
#warning "CONFIGURE_SCHEDULER_CONTEXT has been renamed to CONFIGURE_SCHEDULER since RTEMS 5.1"
#define CONFIGURE_SCHEDULER CONFIGURE_SCHEDULER_CONTEXT
#endif
#ifdef CONFIGURE_SCHEDULER_CONTROLS
#warning "CONFIGURE_SCHEDULER_CONTROLS has been renamed to CONFIGURE_SCHEDULER_TABLE_ENTRIES since RTEMS 5.1"
#define CONFIGURE_SCHEDULER_TABLE_ENTRIES CONFIGURE_SCHEDULER_CONTROLS
#endif
#ifdef CONFIGURE_SMP_SCHEDULER_ASSIGNMENTS
#warning "CONFIGURE_SMP_SCHEDULER_ASSIGNMENTS has been renamed to CONFIGURE_SCHEDULER_ASSIGNMENTS since RTEMS 5.1"
#define CONFIGURE_SCHEDULER_ASSIGNMENTS CONFIGURE_SMP_SCHEDULER_ASSIGNMENTS
#endif
#if !defined(CONFIGURE_SCHEDULER_USER) && \
!defined(CONFIGURE_SCHEDULER_PRIORITY) && \
!defined(CONFIGURE_SCHEDULER_PRIORITY_SMP) && \
!defined(CONFIGURE_SCHEDULER_PRIORITY_AFFINITY_SMP) && \
!defined(CONFIGURE_SCHEDULER_STRONG_APA) && \
!defined(CONFIGURE_SCHEDULER_SIMPLE) && \
!defined(CONFIGURE_SCHEDULER_SIMPLE_SMP) && \
!defined(CONFIGURE_SCHEDULER_EDF) && \
!defined(CONFIGURE_SCHEDULER_EDF_SMP) && \
!defined(CONFIGURE_SCHEDULER_CBS)
#if defined(RTEMS_SMP) && _CONFIGURE_MAXIMUM_PROCESSORS > 1
/**
* If no scheduler is specified in an SMP configuration, the
* EDF scheduler is default.
*/
#define CONFIGURE_SCHEDULER_EDF_SMP
#else
/**
* If no scheduler is specified in a uniprocessor configuration, the
* priority scheduler is default.
*/
#define CONFIGURE_SCHEDULER_PRIORITY
#endif
#endif
#include <rtems/scheduler.h>
/*
* If the Priority Scheduler is selected, then configure for it.
*/
#if defined(CONFIGURE_SCHEDULER_PRIORITY)
#if !defined(CONFIGURE_SCHEDULER_NAME)
/** Configure the name of the scheduler instance */
#define CONFIGURE_SCHEDULER_NAME rtems_build_name('U', 'P', 'D', ' ')
#endif
#if !defined(CONFIGURE_SCHEDULER_TABLE_ENTRIES)
/** Configure the context needed by the scheduler instance */
#define CONFIGURE_SCHEDULER \
RTEMS_SCHEDULER_PRIORITY( \
dflt, \
CONFIGURE_MAXIMUM_PRIORITY + 1 \
)
/** Configure the controls for this scheduler instance */
#define CONFIGURE_SCHEDULER_TABLE_ENTRIES \
RTEMS_SCHEDULER_TABLE_PRIORITY(dflt, CONFIGURE_SCHEDULER_NAME)
#endif
#endif
/*
* If the Deterministic Priority SMP Scheduler is selected, then configure for
* it.
*/
#if defined(CONFIGURE_SCHEDULER_PRIORITY_SMP)
#if !defined(CONFIGURE_SCHEDULER_NAME)
/** Configure the name of the scheduler instance */
#define CONFIGURE_SCHEDULER_NAME rtems_build_name('M', 'P', 'D', ' ')
#endif
#if !defined(CONFIGURE_SCHEDULER_TABLE_ENTRIES)
/** Configure the context needed by the scheduler instance */
#define CONFIGURE_SCHEDULER \
RTEMS_SCHEDULER_PRIORITY_SMP( \
dflt, \
CONFIGURE_MAXIMUM_PRIORITY + 1 \
)
/** Configure the controls for this scheduler instance */
#define CONFIGURE_SCHEDULER_TABLE_ENTRIES \
RTEMS_SCHEDULER_TABLE_PRIORITY_SMP(dflt, CONFIGURE_SCHEDULER_NAME)
#endif
#endif
/*
* If the Deterministic Priority Affinity SMP Scheduler is selected, then configure for
* it.
*/
#if defined(CONFIGURE_SCHEDULER_PRIORITY_AFFINITY_SMP)
#if !defined(CONFIGURE_SCHEDULER_NAME)
/** Configure the name of the scheduler instance */
#define CONFIGURE_SCHEDULER_NAME rtems_build_name('M', 'P', 'A', ' ')
#endif
#if !defined(CONFIGURE_SCHEDULER_TABLE_ENTRIES)
/** Configure the context needed by the scheduler instance */
#define CONFIGURE_SCHEDULER \
RTEMS_SCHEDULER_PRIORITY_AFFINITY_SMP( \
dflt, \
CONFIGURE_MAXIMUM_PRIORITY + 1 \
)
/** Configure the controls for this scheduler instance */
#define CONFIGURE_SCHEDULER_TABLE_ENTRIES \
RTEMS_SCHEDULER_TABLE_PRIORITY_AFFINITY_SMP( \
dflt, \
CONFIGURE_SCHEDULER_NAME \
)
#endif
#endif
/*
* If the Strong APA Scheduler is selected, then configure for
* it.
*/
#if defined(CONFIGURE_SCHEDULER_STRONG_APA)
#if !defined(CONFIGURE_SCHEDULER_NAME)
/** Configure the name of the scheduler instance */
#define CONFIGURE_SCHEDULER_NAME rtems_build_name('M', 'A', 'P', 'A')
#endif
#if !defined(CONFIGURE_SCHEDULER_TABLE_ENTRIES)
/** Configure the context needed by the scheduler instance */
#define CONFIGURE_SCHEDULER \
RTEMS_SCHEDULER_STRONG_APA( \
dflt, \
CONFIGURE_MAXIMUM_PRIORITY + 1 \
)
/** Configure the controls for this scheduler instance */
#define CONFIGURE_SCHEDULER_TABLE_ENTRIES \
RTEMS_SCHEDULER_TABLE_STRONG_APA(dflt, CONFIGURE_SCHEDULER_NAME)
#endif
#endif
/*
* If the Simple Priority Scheduler is selected, then configure for it.
*/
#if defined(CONFIGURE_SCHEDULER_SIMPLE)
#if !defined(CONFIGURE_SCHEDULER_NAME)
/** Configure the name of the scheduler instance */
#define CONFIGURE_SCHEDULER_NAME rtems_build_name('U', 'P', 'S', ' ')
#endif
#if !defined(CONFIGURE_SCHEDULER_TABLE_ENTRIES)
/** Configure the context needed by the scheduler instance */
#define CONFIGURE_SCHEDULER RTEMS_SCHEDULER_SIMPLE(dflt)
/** Configure the controls for this scheduler instance */
#define CONFIGURE_SCHEDULER_TABLE_ENTRIES \
RTEMS_SCHEDULER_TABLE_SIMPLE(dflt, CONFIGURE_SCHEDULER_NAME)
#endif
#endif
/*
* If the Simple SMP Priority Scheduler is selected, then configure for it.
*/
#if defined(CONFIGURE_SCHEDULER_SIMPLE_SMP)
#if !defined(CONFIGURE_SCHEDULER_NAME)
/** Configure the name of the scheduler instance */
#define CONFIGURE_SCHEDULER_NAME rtems_build_name('M', 'P', 'S', ' ')
#endif
#if !defined(CONFIGURE_SCHEDULER_TABLE_ENTRIES)
/** Configure the context needed by the scheduler instance */
#define CONFIGURE_SCHEDULER \
RTEMS_SCHEDULER_SIMPLE_SMP(dflt)
/** Configure the controls for this scheduler instance */
#define CONFIGURE_SCHEDULER_TABLE_ENTRIES \
RTEMS_SCHEDULER_TABLE_SIMPLE_SMP(dflt, CONFIGURE_SCHEDULER_NAME)
#endif
#endif
/*
* If the EDF Scheduler is selected, then configure for it.
*/
#if defined(CONFIGURE_SCHEDULER_EDF)
#if !defined(CONFIGURE_SCHEDULER_NAME)
/** Configure the name of the scheduler instance */
#define CONFIGURE_SCHEDULER_NAME rtems_build_name('U', 'E', 'D', 'F')
#endif
#if !defined(CONFIGURE_SCHEDULER_TABLE_ENTRIES)
/** Configure the context needed by the scheduler instance */
#define CONFIGURE_SCHEDULER RTEMS_SCHEDULER_EDF(dflt)
/** Configure the controls for this scheduler instance */
#define CONFIGURE_SCHEDULER_TABLE_ENTRIES \
RTEMS_SCHEDULER_TABLE_EDF(dflt, CONFIGURE_SCHEDULER_NAME)
#endif
#endif
/*
* If the EDF SMP Scheduler is selected, then configure for it.
*/
#if defined(CONFIGURE_SCHEDULER_EDF_SMP)
#if !defined(CONFIGURE_SCHEDULER_NAME)
/** Configure the name of the scheduler instance */
#define CONFIGURE_SCHEDULER_NAME rtems_build_name('M', 'E', 'D', 'F')
#endif
#if !defined(CONFIGURE_SCHEDULER_TABLE_ENTRIES)
/** Configure the context needed by the scheduler instance */
#define CONFIGURE_SCHEDULER \
RTEMS_SCHEDULER_EDF_SMP(dflt, _CONFIGURE_MAXIMUM_PROCESSORS)
/** Configure the controls for this scheduler instance */
#define CONFIGURE_SCHEDULER_TABLE_ENTRIES \
RTEMS_SCHEDULER_TABLE_EDF_SMP(dflt, CONFIGURE_SCHEDULER_NAME)
#endif
#endif
/*
* If the CBS Scheduler is selected, then configure for it.
*/
#if defined(CONFIGURE_SCHEDULER_CBS)
#if !defined(CONFIGURE_SCHEDULER_NAME)
/** Configure the name of the scheduler instance */
#define CONFIGURE_SCHEDULER_NAME rtems_build_name('U', 'C', 'B', 'S')
#endif
#if !defined(CONFIGURE_SCHEDULER_TABLE_ENTRIES)
/** Configure the context needed by the scheduler instance */
#define CONFIGURE_SCHEDULER RTEMS_SCHEDULER_CBS(dflt)
/** Configure the controls for this scheduler instance */
#define CONFIGURE_SCHEDULER_TABLE_ENTRIES \
RTEMS_SCHEDULER_TABLE_CBS(dflt, CONFIGURE_SCHEDULER_NAME)
#endif
#ifndef CONFIGURE_CBS_MAXIMUM_SERVERS
#define CONFIGURE_CBS_MAXIMUM_SERVERS CONFIGURE_MAXIMUM_TASKS
#endif
#ifdef CONFIGURE_INIT
const uint32_t _Scheduler_CBS_Maximum_servers =
CONFIGURE_CBS_MAXIMUM_SERVERS;
Scheduler_CBS_Server
_Scheduler_CBS_Server_list[ CONFIGURE_CBS_MAXIMUM_SERVERS ];
#endif
#endif
/*
* Set up the scheduler entry points table. The scheduling code uses
* this code to know which scheduler is configured by the user.
*/
#ifdef CONFIGURE_INIT
#if defined(CONFIGURE_SCHEDULER)
CONFIGURE_SCHEDULER;
#endif
const Scheduler_Control _Scheduler_Table[] = {
CONFIGURE_SCHEDULER_TABLE_ENTRIES
};
#define _CONFIGURE_SCHEDULER_COUNT RTEMS_ARRAY_SIZE( _Scheduler_Table )
#if defined(RTEMS_SMP)
const size_t _Scheduler_Count = _CONFIGURE_SCHEDULER_COUNT;
const Scheduler_Assignment _Scheduler_Initial_assignments[] = {
#if defined(CONFIGURE_SCHEDULER_ASSIGNMENTS)
CONFIGURE_SCHEDULER_ASSIGNMENTS
#else
#define _CONFIGURE_SCHEDULER_ASSIGN \
RTEMS_SCHEDULER_ASSIGN( \
0, \
RTEMS_SCHEDULER_ASSIGN_PROCESSOR_OPTIONAL \
)
_CONFIGURE_SCHEDULER_ASSIGN
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 2
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 3
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 4
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 5
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 6
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 7
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 8
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 9
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 10
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 11
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 12
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 13
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 14
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 15
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 16
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 17
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 18
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 19
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 20
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 21
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 22
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 23
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 24
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 25
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 26
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 27
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 28
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 29
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 30
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 31
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#if _CONFIGURE_MAXIMUM_PROCESSORS >= 32
, _CONFIGURE_SCHEDULER_ASSIGN
#endif
#undef _CONFIGURE_SCHEDULER_ASSIGN
#endif
};
RTEMS_STATIC_ASSERT(
_CONFIGURE_MAXIMUM_PROCESSORS
== RTEMS_ARRAY_SIZE( _Scheduler_Initial_assignments ),
_Scheduler_Initial_assignments
);
#endif
#endif
/**@}*/ /* end of Scheduler Configuration */
/**
* @defgroup ConfigurationIdle IDLE Thread Configuration
*
* @addtogroup Configuration
*
* This module contains configuration parameters related to the
* set of IDLE threads. On a uniprocessor system, there is one
* IDLE thread. On an SMP system, there is one for each core.
*/
/*
* If you said the IDLE task was going to do application initialization
* and didn't override the IDLE body, then something is amiss.
*/
#if (defined(CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION) && \
!defined(CONFIGURE_IDLE_TASK_BODY))
#error "CONFIGURE_ERROR: You did not override the IDLE task body."
#endif
/**
* @brief Idle task body configuration.
*
* There is a default IDLE thread body provided by RTEMS which
* has the possibility of being CPU specific. There may be a
* BSP specific override of the RTEMS default body and in turn,
* the application may override and provide its own.
*/
#ifndef CONFIGURE_IDLE_TASK_BODY
#if defined(BSP_IDLE_TASK_BODY)
#define CONFIGURE_IDLE_TASK_BODY BSP_IDLE_TASK_BODY
#else
#define CONFIGURE_IDLE_TASK_BODY _CPU_Thread_Idle_body
#endif
#endif
/**@}*/ /* end of IDLE thread configuration */
/**
* @defgroup ConfigurationStackSize Configuration Thread Stack Size
*
* @addtogroup Configuration
*
* This module contains parameters related to thread aand interrupt stacks.
*/
/**
* By default, use the minimum stack size requested by this port.
*/
#ifndef CONFIGURE_MINIMUM_TASK_STACK_SIZE
#define CONFIGURE_MINIMUM_TASK_STACK_SIZE CPU_STACK_MINIMUM_SIZE
#endif
/**
* This specifies the default POSIX thread stack size. By default, it is
* twice that recommended for the port.
*/
#ifndef CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE
#define CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE \
(2 * CONFIGURE_MINIMUM_TASK_STACK_SIZE)
#endif
/**
* @brief Idle task stack size configuration.
*
* By default, the IDLE task will have a stack of minimum size.
* The BSP or application may override this value.
*/
#ifndef CONFIGURE_IDLE_TASK_STACK_SIZE
#ifdef BSP_IDLE_TASK_STACK_SIZE
#define CONFIGURE_IDLE_TASK_STACK_SIZE BSP_IDLE_TASK_STACK_SIZE
#else
#define CONFIGURE_IDLE_TASK_STACK_SIZE CONFIGURE_MINIMUM_TASK_STACK_SIZE
#endif
#endif
#if CONFIGURE_IDLE_TASK_STACK_SIZE < CONFIGURE_MINIMUM_TASK_STACK_SIZE
#error "CONFIGURE_IDLE_TASK_STACK_SIZE less than CONFIGURE_MINIMUM_TASK_STACK_SIZE"
#endif
/*
* Interrupt stack configuration.
*
* By default, the interrupt stack will be of minimum size.
* The BSP or application may override this value.
*/
#ifndef CONFIGURE_INTERRUPT_STACK_SIZE
#ifdef BSP_INTERRUPT_STACK_SIZE
#define CONFIGURE_INTERRUPT_STACK_SIZE BSP_INTERRUPT_STACK_SIZE
#else
#define CONFIGURE_INTERRUPT_STACK_SIZE CPU_STACK_MINIMUM_SIZE
#endif
#endif
#if CONFIGURE_INTERRUPT_STACK_SIZE % CPU_INTERRUPT_STACK_ALIGNMENT != 0
#error "CONFIGURE_INTERRUPT_STACK_SIZE fails to meet the CPU port interrupt stack alignment"
#endif
#ifdef CONFIGURE_INIT
RTEMS_DEFINE_GLOBAL_SYMBOL(
_Configuration_Interrupt_stack_size,
CONFIGURE_INTERRUPT_STACK_SIZE
);
char _Configuration_Interrupt_stack_area_begin[
_CONFIGURE_MAXIMUM_PROCESSORS * CONFIGURE_INTERRUPT_STACK_SIZE
] RTEMS_ALIGNED( CPU_INTERRUPT_STACK_ALIGNMENT )
RTEMS_SECTION( ".rtemsstack.interrupt.begin" );
const char _Configuration_Interrupt_stack_area_end[ 0 ]
RTEMS_SECTION( ".rtemsstack.interrupt.end" ) = { };
#endif
/**
* Configure the very much optional task stack allocator initialization
*/
#ifndef CONFIGURE_TASK_STACK_ALLOCATOR_INIT
#define CONFIGURE_TASK_STACK_ALLOCATOR_INIT NULL
#endif
/*
* Configure the very much optional task stack allocator and deallocator.
*/
#if !defined(CONFIGURE_TASK_STACK_ALLOCATOR) \
&& !defined(CONFIGURE_TASK_STACK_DEALLOCATOR)
/**
* This specifies the task stack allocator method.
*/
#define CONFIGURE_TASK_STACK_ALLOCATOR _Workspace_Allocate
/**
* This specifies the task stack deallocator method.
*/
#define CONFIGURE_TASK_STACK_DEALLOCATOR _Workspace_Free
#elif (defined(CONFIGURE_TASK_STACK_ALLOCATOR) \
&& !defined(CONFIGURE_TASK_STACK_DEALLOCATOR)) \
|| (!defined(CONFIGURE_TASK_STACK_ALLOCATOR) \
&& defined(CONFIGURE_TASK_STACK_DEALLOCATOR))
#error "CONFIGURE_TASK_STACK_ALLOCATOR and CONFIGURE_TASK_STACK_DEALLOCATOR must be both defined or both undefined"
#endif
/**@}*/ /* end of thread/interrupt stack configuration */
/**
* @addtogroup Configuration
*/
/**@{*/
/**
* Should the RTEMS Workspace and C Program Heap be cleared automatically
* at system start up?
*/
#ifndef CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY
#ifdef BSP_ZERO_WORKSPACE_AUTOMATICALLY
#define CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY \
BSP_ZERO_WORKSPACE_AUTOMATICALLY
#else
#define CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY FALSE
#endif
#endif
/**@}*/ /* end of add to group Configuration */
/**
* @defgroup ConfigurationMalloc RTEMS Malloc configuration
*
* This module contains parameters related to configuration of the RTEMS
* Malloc implementation.
*/
/**@{*/
#include <rtems/malloc.h>
#ifdef CONFIGURE_INIT
/**
* By default, RTEMS uses separate heaps for the RTEMS Workspace and
* the C Program Heap. The application can choose optionally to combine
* these to provide one larger memory pool. This is particularly
* useful in combination with the unlimited objects configuration.
*/
#ifdef CONFIGURE_UNIFIED_WORK_AREAS
Heap_Control *RTEMS_Malloc_Heap = &_Workspace_Area;
#else
Heap_Control RTEMS_Malloc_Area;
Heap_Control *RTEMS_Malloc_Heap = &RTEMS_Malloc_Area;
#endif
#endif
#ifdef CONFIGURE_INIT
/**
* This configures the sbrk() support for the malloc family.
* By default it is assumed that the BSP provides all available
* RAM to the malloc family implementation so sbrk()'ing to get
* more memory would always fail anyway.
*/
const rtems_heap_extend_handler rtems_malloc_extend_handler =
#ifdef CONFIGURE_MALLOC_BSP_SUPPORTS_SBRK
rtems_heap_extend_via_sbrk;
#else
rtems_heap_null_extend;
#endif
#endif
#ifdef CONFIGURE_INIT
/**
* This configures the malloc family plugin which dirties memory
* allocated. This is helpful for finding unitialized data structure
* problems.
*/
rtems_malloc_dirtier_t rtems_malloc_dirty_helper =
#if defined(CONFIGURE_MALLOC_DIRTY)
rtems_malloc_dirty_memory;
#else
NULL;
#endif
#endif
/**@}*/ /* end of Malloc Configuration */
/**
* @defgroup ConfigurationHelpers Configuration Helpers
*
* @ingroup Configuration
*
* This module contains items which are used internally to ease
* the configuration calculations.
*/
/**@{*/
/**
* Zero of one returns 0 if the parameter is 0 else 1 is returned.
*/
#define _Configure_Zero_or_One(_number) ((_number) != 0 ? 1 : 0)
/**
* General helper to align up a value.
*/
#define _Configure_Align_up(_val, _align) \
(((_val) + (_align) - 1) - ((_val) + (_align) - 1) % (_align))
#define _CONFIGURE_HEAP_MIN_BLOCK_SIZE \
_Configure_Align_up(sizeof(Heap_Block), CPU_HEAP_ALIGNMENT)
/**
* This is a helper macro used in calculations in this file. It is used
* to noted when an element is allocated from the RTEMS Workspace and adds
* a factor to account for heap overhead plus an alignment factor that
* may be applied.
*/
#define _Configure_From_workspace(_size) \
(ssize_t) (_Configure_Zero_or_One(_size) * \
_Configure_Align_up(_size + HEAP_BLOCK_HEADER_SIZE, \
_CONFIGURE_HEAP_MIN_BLOCK_SIZE))
/**
* This is a helper macro used in stack space calculations in this file. It
* may be provided by the application in case a special task stack allocator
* is used. The default is allocation from the RTEMS Workspace.
*/
#ifdef CONFIGURE_TASK_STACK_FROM_ALLOCATOR
#define _Configure_From_stackspace(_stack_size) \
CONFIGURE_TASK_STACK_FROM_ALLOCATOR(_stack_size)
#else
#define _Configure_From_stackspace(_stack_size) \
_Configure_From_workspace(_stack_size)
#endif
/**
* Do not use the unlimited bit as part of the multiplication
* for memory usage.
*/
#define _Configure_Max_Objects(_max) \
(_Configure_Zero_or_One(_max) * rtems_resource_maximum_per_allocation(_max))
/**
* This macro accounts for how memory for a set of configured objects is
* allocated from the Executive Workspace.
*
* NOTE: It does NOT attempt to address the more complex case of unlimited
* objects.
*/
#define _Configure_Object_RAM(_number, _size) ( \
_Configure_From_workspace(_Configure_Max_Objects(_number) * (_size)) + \
_Configure_From_workspace( \
_Configure_Zero_or_One(_number) * ( \
(_Configure_Max_Objects(_number) + 1) * sizeof(Objects_Control *) + \
_Configure_Align_up(sizeof(void *), CPU_ALIGNMENT) + \
_Configure_Align_up(sizeof(uint32_t), CPU_ALIGNMENT) \
) \
) \
)
/**@}*/
/**
* @defgroup ConfigurationInitTasksTable Initialization Tasks Configuration
*
* @addtogroup Configuration
*
* This group contains the elements needed to define the Classic API
* Initialization Tasks Table.
*
* Default User Initialization Task Table. This table guarantees that
* one user initialization table is defined.
*
* WHEN CONFIGURE_HAS_OWN_INIT_TASK_TABLE is defined, the user is
* responsible for defining their own table information and setting the
* appropriate variables.
*/
#if defined(CONFIGURE_RTEMS_INIT_TASKS_TABLE) && \
!defined(CONFIGURE_HAS_OWN_INIT_TASK_TABLE)
/**
* When using the default Classic API Initialization Tasks Table, this is
* used to specify the name of the single Classic API task.
*/
#ifndef CONFIGURE_INIT_TASK_NAME
#define CONFIGURE_INIT_TASK_NAME rtems_build_name('U', 'I', '1', ' ')
#endif
/**
* When using the default Classic API Initialization Tasks Table, this is
* used to specify the stack size of the single Classic API task.
*/
#ifndef CONFIGURE_INIT_TASK_STACK_SIZE
#define CONFIGURE_INIT_TASK_STACK_SIZE CONFIGURE_MINIMUM_TASK_STACK_SIZE
#endif
/**
* When using the default Classic API Initialization Tasks Table, this is
* used to specify the priority of the single Classic API task.
*/
#ifndef CONFIGURE_INIT_TASK_PRIORITY
#define CONFIGURE_INIT_TASK_PRIORITY 1
#endif
/**
* When using the default Classic API Initialization Tasks Table, this is
* used to specify the attributes size of the single Classic API task.
*/
#ifndef CONFIGURE_INIT_TASK_ATTRIBUTES
#define CONFIGURE_INIT_TASK_ATTRIBUTES RTEMS_DEFAULT_ATTRIBUTES
#endif
/**
* When using the default Classic API Initialization Tasks Table, this is
* used to specify the entry point of the single Classic API task.
*/
#ifndef CONFIGURE_INIT_TASK_ENTRY_POINT
#ifdef __cplusplus
extern "C" {
#endif
rtems_task Init (rtems_task_argument );
#ifdef __cplusplus
}
#endif
#define CONFIGURE_INIT_TASK_ENTRY_POINT Init
extern const char* bsp_boot_cmdline;
#define CONFIGURE_INIT_TASK_ARGUMENTS ((rtems_task_argument) &bsp_boot_cmdline)
#endif
/**
* When using the default Classic API Initialization Tasks Table, this is
* used to specify the initial execution mode of the single Classic API task.
*/
#ifndef CONFIGURE_INIT_TASK_INITIAL_MODES
#ifdef _CONFIGURE_SMP_APPLICATION
#define CONFIGURE_INIT_TASK_INITIAL_MODES RTEMS_DEFAULT_MODES
#else
#define CONFIGURE_INIT_TASK_INITIAL_MODES RTEMS_NO_PREEMPT
#endif
#endif
/**
* When using the default Classic API Initialization Tasks Table, this is
* used to specify the initial argument to the single Classic API task.
*/
#ifndef CONFIGURE_INIT_TASK_ARGUMENTS
#define CONFIGURE_INIT_TASK_ARGUMENTS 0
#endif
#ifdef CONFIGURE_INIT
rtems_initialization_tasks_table Initialization_tasks[] = {
{ CONFIGURE_INIT_TASK_NAME,
CONFIGURE_INIT_TASK_STACK_SIZE,
CONFIGURE_INIT_TASK_PRIORITY,
CONFIGURE_INIT_TASK_ATTRIBUTES,
CONFIGURE_INIT_TASK_ENTRY_POINT,
CONFIGURE_INIT_TASK_INITIAL_MODES,
CONFIGURE_INIT_TASK_ARGUMENTS
}
};
#endif
/**
* This is the name of the Initialization Tasks Table generated.
*/
#define CONFIGURE_INIT_TASK_TABLE Initialization_tasks
/*
* This is the size of the Initialization Tasks Table generated.
*/
#define CONFIGURE_INIT_TASK_TABLE_SIZE \
RTEMS_ARRAY_SIZE(CONFIGURE_INIT_TASK_TABLE)
#else /* CONFIGURE_RTEMS_INIT_TASKS_TABLE */
#ifdef CONFIGURE_HAS_OWN_INIT_TASK_TABLE
/*
* The user application is responsible for defining everything
* when CONFIGURE_HAS_OWN_INIT_TABLE is defined.
*/
#else /* not using standard or providing own Init Task Table */
/*
* This is the name of the Initialization Task when none is configured.
*/
#define CONFIGURE_INIT_TASK_TABLE NULL
/*
* This is the size of the Initialization Task when none is configured.
*/
#define CONFIGURE_INIT_TASK_TABLE_SIZE 0
/*
* This is the stack size of the Initialization Task when none is configured.
*/
#define CONFIGURE_INIT_TASK_STACK_SIZE 0
#endif /* CONFIGURE_HAS_OWN_INIT_TASK_TABLE */
#endif
/**@}*/ /* end of Classic API Initialization Tasks Table */
/**
* @defgroup ConfigurationDriverTable Device Driver Table Configuration
*
* @addtogroup Configuration
*
* This group contains parameters related to generating a Device Driver
* Table.
*
* Default Device Driver Table. Each driver needed by the test is explicitly
* choosen by the application. There is always a null driver entry.
*/
/**@{*/
/**
* This is an empty device driver slot.
*/
#define NULL_DRIVER_TABLE_ENTRY \
{ NULL, NULL, NULL, NULL, NULL, NULL }
#if (defined(CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER) && \
defined(CONFIGURE_APPLICATION_NEEDS_SIMPLE_CONSOLE_DRIVER)) || \
(defined(CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER) && \
defined(CONFIGURE_APPLICATION_NEEDS_SIMPLE_TASK_CONSOLE_DRIVER)) || \
(defined(CONFIGURE_APPLICATION_NEEDS_SIMPLE_CONSOLE_DRIVER) && \
defined(CONFIGURE_APPLICATION_NEEDS_SIMPLE_TASK_CONSOLE_DRIVER))
#error "CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER, CONFIGURE_APPLICATION_NEEDS_SIMPLE_CONSOLE_DRIVER, and CONFIGURE_APPLICATION_NEEDS_SIMPLE_TASK_CONSOLE_DRIVER are mutually exclusive"
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
#include <rtems/console.h>
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_SIMPLE_CONSOLE_DRIVER
#include <rtems/console.h>
#ifdef CONFIGURE_INIT
RTEMS_SYSINIT_ITEM(
_Console_simple_Initialize,
RTEMS_SYSINIT_DEVICE_DRIVERS,
RTEMS_SYSINIT_ORDER_SECOND
);
#endif
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_SIMPLE_TASK_CONSOLE_DRIVER
#include <rtems/console.h>
#ifdef CONFIGURE_INIT
RTEMS_SYSINIT_ITEM(
_Console_simple_task_Initialize,
RTEMS_SYSINIT_DEVICE_DRIVERS,
RTEMS_SYSINIT_ORDER_SECOND
);
#endif
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
#include <rtems/clockdrv.h>
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_TIMER_DRIVER
#include <rtems/btimer.h>
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER
#include <rtems/rtc.h>
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_WATCHDOG_DRIVER
#include <rtems/watchdogdrv.h>
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_FRAME_BUFFER_DRIVER
#include <rtems/framebuffer.h>
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_STUB_DRIVER
#include <rtems/devnull.h>
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_ZERO_DRIVER
#include <rtems/devzero.h>
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_IDE_DRIVER
/* the ide driver needs the ATA driver */
#ifndef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
#define CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
#endif
#include <libchip/ide_ctrl.h>
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
#include <libchip/ata.h>
#endif
#ifndef CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE
/**
* This specifies the maximum number of device drivers that
* can be installed in the system at one time. It must account
* for both the statically and dynamically installed drivers.
*/
#ifndef CONFIGURE_MAXIMUM_DRIVERS
#define CONFIGURE_MAXIMUM_DRIVERS
#endif
#ifdef CONFIGURE_INIT
rtems_driver_address_table
_IO_Driver_address_table[ CONFIGURE_MAXIMUM_DRIVERS ] = {
#ifdef CONFIGURE_BSP_PREREQUISITE_DRIVERS
CONFIGURE_BSP_PREREQUISITE_DRIVERS,
#endif
#ifdef CONFIGURE_APPLICATION_PREREQUISITE_DRIVERS
CONFIGURE_APPLICATION_PREREQUISITE_DRIVERS,
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER
CONSOLE_DRIVER_TABLE_ENTRY,
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
CLOCK_DRIVER_TABLE_ENTRY,
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER
RTC_DRIVER_TABLE_ENTRY,
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_WATCHDOG_DRIVER
WATCHDOG_DRIVER_TABLE_ENTRY,
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_STUB_DRIVER
DEVNULL_DRIVER_TABLE_ENTRY,
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_ZERO_DRIVER
DEVZERO_DRIVER_TABLE_ENTRY,
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_IDE_DRIVER
IDE_CONTROLLER_DRIVER_TABLE_ENTRY,
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
ATA_DRIVER_TABLE_ENTRY,
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_FRAME_BUFFER_DRIVER
FRAME_BUFFER_DRIVER_TABLE_ENTRY,
#endif
#ifdef CONFIGURE_APPLICATION_EXTRA_DRIVERS
CONFIGURE_APPLICATION_EXTRA_DRIVERS,
#endif
#ifdef CONFIGURE_APPLICATION_NEEDS_NULL_DRIVER
NULL_DRIVER_TABLE_ENTRY
#elif !defined(CONFIGURE_APPLICATION_NEEDS_CONSOLE_DRIVER) && \
!defined(CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER) && \
!defined(CONFIGURE_APPLICATION_NEEDS_RTC_DRIVER) && \
!defined(CONFIGURE_APPLICATION_NEEDS_STUB_DRIVER) && \
!defined(CONFIGURE_APPLICATION_NEEDS_ZERO_DRIVER) && \
!defined(CONFIGURE_APPLICATION_NEEDS_IDE_DRIVER) && \
!defined(CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER) && \
!defined(CONFIGURE_APPLICATION_NEEDS_FRAME_BUFFER_DRIVER) && \
!defined(CONFIGURE_APPLICATION_EXTRA_DRIVERS)
NULL_DRIVER_TABLE_ENTRY
#endif
};
const size_t _IO_Number_of_drivers =
RTEMS_ARRAY_SIZE( _IO_Driver_address_table );
#endif
#endif /* CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE */
#ifdef CONFIGURE_APPLICATION_NEEDS_ATA_DRIVER
/*
* configure the priority of the ATA driver task
*/
#ifndef CONFIGURE_ATA_DRIVER_TASK_PRIORITY
#define CONFIGURE_ATA_DRIVER_TASK_PRIORITY ATA_DRIVER_TASK_DEFAULT_PRIORITY
#endif
#ifdef CONFIGURE_INIT
rtems_task_priority rtems_ata_driver_task_priority
= CONFIGURE_ATA_DRIVER_TASK_PRIORITY;
#endif /* CONFIGURE_INIT */
#endif
/**@}*/ /* end of Device Driver Table Configuration */
/**
* @defgroup ConfigurationLibBlock Configuration of LIBBLOCK
*
* @addtogroup Configuration
*
* This module contains parameters related to the LIBBLOCK buffering
* and caching subsystem. It requires tasks to swap out data to be
* written to non-volatile storage.
*/
/**@{*/
#ifdef CONFIGURE_APPLICATION_NEEDS_LIBBLOCK
#include <rtems/bdbuf.h>
/*
* configure the bdbuf cache parameters
*/
#ifndef CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS
#define CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS \
RTEMS_BDBUF_MAX_READ_AHEAD_BLOCKS_DEFAULT
#endif
#ifndef CONFIGURE_BDBUF_MAX_WRITE_BLOCKS
#define CONFIGURE_BDBUF_MAX_WRITE_BLOCKS \
RTEMS_BDBUF_MAX_WRITE_BLOCKS_DEFAULT
#endif
#ifndef CONFIGURE_SWAPOUT_TASK_PRIORITY
#define CONFIGURE_SWAPOUT_TASK_PRIORITY \
RTEMS_BDBUF_SWAPOUT_TASK_PRIORITY_DEFAULT
#endif
#ifndef CONFIGURE_SWAPOUT_SWAP_PERIOD
#define CONFIGURE_SWAPOUT_SWAP_PERIOD \
RTEMS_BDBUF_SWAPOUT_TASK_SWAP_PERIOD_DEFAULT
#endif
#ifndef CONFIGURE_SWAPOUT_BLOCK_HOLD
#define CONFIGURE_SWAPOUT_BLOCK_HOLD \
RTEMS_BDBUF_SWAPOUT_TASK_BLOCK_HOLD_DEFAULT
#endif
#ifndef CONFIGURE_SWAPOUT_WORKER_TASKS
#define CONFIGURE_SWAPOUT_WORKER_TASKS \
RTEMS_BDBUF_SWAPOUT_WORKER_TASKS_DEFAULT
#endif
#ifndef CONFIGURE_SWAPOUT_WORKER_TASK_PRIORITY
#define CONFIGURE_SWAPOUT_WORKER_TASK_PRIORITY \
RTEMS_BDBUF_SWAPOUT_WORKER_TASK_PRIORITY_DEFAULT
#endif
#ifndef CONFIGURE_BDBUF_TASK_STACK_SIZE
#define CONFIGURE_BDBUF_TASK_STACK_SIZE \
RTEMS_BDBUF_TASK_STACK_SIZE_DEFAULT
#endif
#ifndef CONFIGURE_BDBUF_CACHE_MEMORY_SIZE
#define CONFIGURE_BDBUF_CACHE_MEMORY_SIZE \
RTEMS_BDBUF_CACHE_MEMORY_SIZE_DEFAULT
#endif
#ifndef CONFIGURE_BDBUF_BUFFER_MIN_SIZE
#define CONFIGURE_BDBUF_BUFFER_MIN_SIZE \
RTEMS_BDBUF_BUFFER_MIN_SIZE_DEFAULT
#endif
#ifndef CONFIGURE_BDBUF_BUFFER_MAX_SIZE
#define CONFIGURE_BDBUF_BUFFER_MAX_SIZE \
RTEMS_BDBUF_BUFFER_MAX_SIZE_DEFAULT
#endif
#ifndef CONFIGURE_BDBUF_READ_AHEAD_TASK_PRIORITY
#define CONFIGURE_BDBUF_READ_AHEAD_TASK_PRIORITY \
RTEMS_BDBUF_READ_AHEAD_TASK_PRIORITY_DEFAULT
#endif
#ifdef CONFIGURE_INIT
const rtems_bdbuf_config rtems_bdbuf_configuration = {
CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS,
CONFIGURE_BDBUF_MAX_WRITE_BLOCKS,
CONFIGURE_SWAPOUT_TASK_PRIORITY,
CONFIGURE_SWAPOUT_SWAP_PERIOD,
CONFIGURE_SWAPOUT_BLOCK_HOLD,
CONFIGURE_SWAPOUT_WORKER_TASKS,
CONFIGURE_SWAPOUT_WORKER_TASK_PRIORITY,
CONFIGURE_BDBUF_TASK_STACK_SIZE,
CONFIGURE_BDBUF_CACHE_MEMORY_SIZE,
CONFIGURE_BDBUF_BUFFER_MIN_SIZE,
CONFIGURE_BDBUF_BUFFER_MAX_SIZE,
CONFIGURE_BDBUF_READ_AHEAD_TASK_PRIORITY
};
#endif
#define _CONFIGURE_LIBBLOCK_TASKS \
(1 + CONFIGURE_SWAPOUT_WORKER_TASKS + \
(CONFIGURE_BDBUF_MAX_READ_AHEAD_BLOCKS != 0))
#define _CONFIGURE_LIBBLOCK_TASK_EXTRA_STACKS \
(_CONFIGURE_LIBBLOCK_TASKS * \
(CONFIGURE_BDBUF_TASK_STACK_SIZE <= CONFIGURE_MINIMUM_TASK_STACK_SIZE ? \
0 : CONFIGURE_BDBUF_TASK_STACK_SIZE - CONFIGURE_MINIMUM_TASK_STACK_SIZE))
#if defined(CONFIGURE_HAS_OWN_BDBUF_TABLE) || \
defined(CONFIGURE_BDBUF_BUFFER_SIZE) || \
defined(CONFIGURE_BDBUF_BUFFER_COUNT)
#error BDBUF Cache does not use a buffer configuration table. Please remove.
#endif
#else
/** This specifies the number of libblock tasks. */
#define _CONFIGURE_LIBBLOCK_TASKS 0
/** This specifies the extra stack space configured for libblock tasks. */
#define _CONFIGURE_LIBBLOCK_TASK_EXTRA_STACKS 0
/** This specifies the number of Classic API semaphores needed by libblock. */
#endif /* CONFIGURE_APPLICATION_NEEDS_LIBBLOCK */
/**@}*/
/**
* @defgroup ConfigurationMultiprocessing Multiprocessing Configuration
*
* @addtogroup Configuration
*
* This module contains the parameters related to the Multiprocessing
* configuration of RTEMS.
*
* In a single processor or SMP configuration, only two parameters are
* needed and they are defaulted. The user should not have to specify
* any parameters.
*/
/**@{*/
/**
* This defines the extra stack space required for the MPCI server thread.
*/
#ifndef CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK
#define CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK 0
#endif
#if defined(RTEMS_MULTIPROCESSING)
/*
* Default Multiprocessing Configuration Table. The defaults are
* appropriate for most of the RTEMS Multiprocessor Test Suite. Each
* value may be overridden within each test to customize the environment.
*/
#ifdef CONFIGURE_MP_APPLICATION
#define _CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER 1
#ifndef CONFIGURE_HAS_OWN_MULTIPROCESSING_TABLE
#ifndef CONFIGURE_MP_NODE_NUMBER
#define CONFIGURE_MP_NODE_NUMBER NODE_NUMBER
#endif
#ifndef CONFIGURE_MP_MAXIMUM_NODES
#define CONFIGURE_MP_MAXIMUM_NODES 2
#endif
#ifndef CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS
#define CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS 32
#endif
#define _CONFIGURE_MEMORY_FOR_GLOBAL_OBJECTS(_global_objects) \
_Configure_From_workspace( \
(_global_objects) * sizeof(Objects_MP_Control) \
)
#ifndef CONFIGURE_MP_MAXIMUM_PROXIES
#define CONFIGURE_MP_MAXIMUM_PROXIES 32
#endif
#define _CONFIGURE_MEMORY_FOR_PROXIES(_proxies) \
_Configure_From_workspace((_proxies) \
* (sizeof(Thread_Proxy_control) \
+ THREAD_QUEUE_HEADS_SIZE(_CONFIGURE_SCHEDULER_COUNT)))
#ifndef CONFIGURE_MP_MPCI_TABLE_POINTER
#include <mpci.h>
#define CONFIGURE_MP_MPCI_TABLE_POINTER &MPCI_table
#endif
#ifdef CONFIGURE_INIT
rtems_multiprocessing_table Multiprocessing_configuration = {
CONFIGURE_MP_NODE_NUMBER, /* local node number */
CONFIGURE_MP_MAXIMUM_NODES, /* maximum # nodes */
CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS, /* maximum # global objects */
CONFIGURE_MP_MAXIMUM_PROXIES, /* maximum # proxies */
CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK, /* MPCI stack > minimum */
CONFIGURE_MP_MPCI_TABLE_POINTER /* ptr to MPCI config table */
};
#endif
#define CONFIGURE_MULTIPROCESSING_TABLE &Multiprocessing_configuration
#define _CONFIGURE_MPCI_RECEIVE_SERVER_COUNT 1
#endif /* CONFIGURE_HAS_OWN_MULTIPROCESSING_TABLE */
#else
#define CONFIGURE_MULTIPROCESSING_TABLE NULL
#define _CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER 0
#define _CONFIGURE_MPCI_RECEIVE_SERVER_COUNT 0
#endif /* CONFIGURE_MP_APPLICATION */
#else
#define _CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER 0
#define _CONFIGURE_MPCI_RECEIVE_SERVER_COUNT 0
#endif /* RTEMS_MULTIPROCESSING */
/**@}*/ /* end of Multiprocessing Configuration */
/**
* This macro specifies that the user wants to use unlimited objects for any
* classic or posix objects that have not already been given resource limits.
*/
#if defined(CONFIGURE_UNLIMITED_OBJECTS)
#if !defined(CONFIGURE_UNIFIED_WORK_AREAS) && \
!defined(CONFIGURE_EXECUTIVE_RAM_SIZE) && \
!defined(CONFIGURE_MEMORY_OVERHEAD)
#error "CONFIGURE_UNLIMITED_OBJECTS requires a unified work area, an executive RAM size, or a defined workspace memory overhead"
#endif
#if !defined(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
/**
* This macro specifies a default allocation size for when auto-extending
* unlimited objects if none was given by the user.
*/
#define CONFIGURE_UNLIMITED_ALLOCATION_SIZE 8
#endif
#if !defined(CONFIGURE_MAXIMUM_TASKS)
#define CONFIGURE_MAXIMUM_TASKS \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_TIMERS)
#define CONFIGURE_MAXIMUM_TIMERS \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_SEMAPHORES)
#define CONFIGURE_MAXIMUM_SEMAPHORES \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_MESSAGE_QUEUES)
#define CONFIGURE_MAXIMUM_MESSAGE_QUEUES \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_PARTITIONS)
#define CONFIGURE_MAXIMUM_PARTITIONS \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_REGIONS)
#define CONFIGURE_MAXIMUM_REGIONS \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_PORTS)
#define CONFIGURE_MAXIMUM_PORTS \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_PERIODS)
#define CONFIGURE_MAXIMUM_PERIODS \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_BARRIERS)
#define CONFIGURE_MAXIMUM_BARRIERS \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_POSIX_KEYS)
#define CONFIGURE_MAXIMUM_POSIX_KEYS \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS)
#define CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES)
#define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_POSIX_SEMAPHORES)
#define CONFIGURE_MAXIMUM_POSIX_SEMAPHORES \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_POSIX_SHMS)
#define CONFIGURE_MAXIMUM_POSIX_SHMS \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#if !defined(CONFIGURE_MAXIMUM_POSIX_THREADS)
#define CONFIGURE_MAXIMUM_POSIX_THREADS \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
#ifdef RTEMS_POSIX_API
#if !defined(CONFIGURE_MAXIMUM_POSIX_TIMERS)
#define CONFIGURE_MAXIMUM_POSIX_TIMERS \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
/*
#if !defined(CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS)
#define CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS \
rtems_resource_unlimited(CONFIGURE_UNLIMITED_ALLOCATION_SIZE)
#endif
*/
#endif /* RTEMS_POSIX_API */
#endif /* CONFIGURE_UNLIMITED_OBJECTS */
/**
* @defgroup ConfigurationClassicAPI Classic API Configuration
*
* @ingroup Configuration
*
* This module contains the parameters related to configuration
* of the Classic API services.
*/
/**@{*/
/** This configures the maximum number of Classic API tasks. */
#ifndef CONFIGURE_MAXIMUM_TASKS
#define CONFIGURE_MAXIMUM_TASKS 0
#endif
/*
* This is calculated to account for the maximum number of Classic API
* tasks used by the application and configured RTEMS capabilities.
*/
#define _CONFIGURE_TASKS \
(CONFIGURE_MAXIMUM_TASKS + _CONFIGURE_LIBBLOCK_TASKS)
#ifndef CONFIGURE_MAXIMUM_TIMERS
/** This specifies the maximum number of Classic API timers. */
#define CONFIGURE_MAXIMUM_TIMERS 0
/*
* This macro is calculated to specify the memory required for
* Classic API timers.
*/
#define _CONFIGURE_MEMORY_FOR_TIMERS(_timers) 0
#else
#define _CONFIGURE_MEMORY_FOR_TIMERS(_timers) \
_Configure_Object_RAM(_timers, sizeof(Timer_Control) )
#endif
#ifndef CONFIGURE_MAXIMUM_SEMAPHORES
/** This specifies the maximum number of Classic API semaphores. */
#define CONFIGURE_MAXIMUM_SEMAPHORES 0
#endif
/*
* This macro is calculated to specify the memory required for
* Classic API Semaphores using MRSP. This is only available in
* SMP configurations.
*/
#if !defined(RTEMS_SMP) || \
!defined(CONFIGURE_MAXIMUM_MRSP_SEMAPHORES)
#define _CONFIGURE_MEMORY_FOR_MRSP_SEMAPHORES 0
#else
#define _CONFIGURE_MEMORY_FOR_MRSP_SEMAPHORES \
CONFIGURE_MAXIMUM_MRSP_SEMAPHORES * \
_Configure_From_workspace( \
RTEMS_ARRAY_SIZE(_Scheduler_Table) * sizeof(Priority_Control) \
)
#endif
/*
* This macro is calculated to specify the memory required for
* Classic API Semaphores.
*
* If there are no user or support semaphores defined, then we can assume
* that no memory need be allocated at all for semaphores.
*/
#if CONFIGURE_MAXIMUM_SEMAPHORES == 0
#define _CONFIGURE_MEMORY_FOR_SEMAPHORES(_semaphores) 0
#else
#define _CONFIGURE_MEMORY_FOR_SEMAPHORES(_semaphores) \
_Configure_Object_RAM(_semaphores, sizeof(Semaphore_Control) ) + \
_CONFIGURE_MEMORY_FOR_MRSP_SEMAPHORES
#endif
#ifndef CONFIGURE_MAXIMUM_MESSAGE_QUEUES
/**
* This configuration parameter specifies the maximum number of
* Classic API Message Queues.
*/
#define CONFIGURE_MAXIMUM_MESSAGE_QUEUES 0
/*
* This macro is calculated to specify the RTEMS Workspace required for
* the Classic API Message Queues.
*/
#define _CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(_queues) 0
#else
#define _CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(_queues) \
_Configure_Object_RAM(_queues, sizeof(Message_queue_Control) )
#endif
#ifndef CONFIGURE_MAXIMUM_PARTITIONS
/**
* This configuration parameter specifies the maximum number of
* Classic API Partitions.
*/
#define CONFIGURE_MAXIMUM_PARTITIONS 0
/*
* This macro is calculated to specify the memory required for
* Classic API
*/
#define _CONFIGURE_MEMORY_FOR_PARTITIONS(_partitions) 0
#else
#define _CONFIGURE_MEMORY_FOR_PARTITIONS(_partitions) \
_Configure_Object_RAM(_partitions, sizeof(Partition_Control) )
#endif
#ifndef CONFIGURE_MAXIMUM_REGIONS
/**
* This configuration parameter specifies the maximum number of
* Classic API Regions.
*/
#define CONFIGURE_MAXIMUM_REGIONS 0
/*
* This macro is calculated to specify the memory required for
* Classic API Regions.
*/
#define _CONFIGURE_MEMORY_FOR_REGIONS(_regions) 0
#else
#define _CONFIGURE_MEMORY_FOR_REGIONS(_regions) \
_Configure_Object_RAM(_regions, sizeof(Region_Control) )
#endif
#ifndef CONFIGURE_MAXIMUM_PORTS
/**
* This configuration parameter specifies the maximum number of
* Classic API Dual-Ported Memory Ports.
*/
#define CONFIGURE_MAXIMUM_PORTS 0
/**
* This macro is calculated to specify the memory required for
* Classic API Dual-Ported Memory Ports.
*/
#define _CONFIGURE_MEMORY_FOR_PORTS(_ports) 0
#else
#define _CONFIGURE_MEMORY_FOR_PORTS(_ports) \
_Configure_Object_RAM(_ports, sizeof(Dual_ported_memory_Control) )
#endif
#ifndef CONFIGURE_MAXIMUM_PERIODS
/**
* This configuration parameter specifies the maximum number of
* Classic API Rate Monotonic Periods.
*/
#define CONFIGURE_MAXIMUM_PERIODS 0
/*
* This macro is calculated to specify the memory required for
* Classic API Rate Monotonic Periods.
*/
#define _CONFIGURE_MEMORY_FOR_PERIODS(_periods) 0
#else
#define _CONFIGURE_MEMORY_FOR_PERIODS(_periods) \
_Configure_Object_RAM(_periods, sizeof(Rate_monotonic_Control) )
#endif
/**
* This configuration parameter specifies the maximum number of
* Classic API Barriers.
*/
#ifndef CONFIGURE_MAXIMUM_BARRIERS
#define CONFIGURE_MAXIMUM_BARRIERS 0
#endif
/*
* This macro is calculated to specify the number of Classic API
* Barriers required by the application and configured capabilities.
*/
#define _CONFIGURE_BARRIERS \
(CONFIGURE_MAXIMUM_BARRIERS + _CONFIGURE_BARRIERS_FOR_FIFOS)
/*
* This macro is calculated to specify the memory required for
* Classic API Barriers.
*/
#if _CONFIGURE_BARRIERS == 0
#define _CONFIGURE_MEMORY_FOR_BARRIERS(_barriers) 0
#else
#define _CONFIGURE_MEMORY_FOR_BARRIERS(_barriers) \
_Configure_Object_RAM(_barriers, sizeof(Barrier_Control) )
#endif
#ifndef CONFIGURE_MAXIMUM_USER_EXTENSIONS
/**
* This configuration parameter specifies the maximum number of
* Classic API User Extensions.
*/
#define CONFIGURE_MAXIMUM_USER_EXTENSIONS 0
/*
* This macro is calculated to specify the memory required for
* Classic API User Extensions.
*/
#define _CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(_extensions) 0
#else
#define _CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(_extensions) \
_Configure_Object_RAM(_extensions, sizeof(Extension_Control) )
#endif
/**@}*/ /* end of Classic API Configuration */
/**
* @defgroup ConfigurationGeneral General System Configuration
*
* @ingroup Configuration
*
* This module contains configuration parameters that are independent
* of any API but impact general system configuration.
*/
/**@{*/
/** The configures the number of microseconds per clock tick. */
#ifndef CONFIGURE_MICROSECONDS_PER_TICK
#define CONFIGURE_MICROSECONDS_PER_TICK \
RTEMS_MILLISECONDS_TO_MICROSECONDS(10)
#endif
#if 1000000 % CONFIGURE_MICROSECONDS_PER_TICK != 0
#warning "The clock ticks per second is not an integer"
#endif
#if CONFIGURE_MICROSECONDS_PER_TICK <= 0
#error "The CONFIGURE_MICROSECONDS_PER_TICK must be positive"
#endif
#define _CONFIGURE_TICKS_PER_SECOND (1000000 / CONFIGURE_MICROSECONDS_PER_TICK)
/** The configures the number of clock ticks per timeslice. */
#ifndef CONFIGURE_TICKS_PER_TIMESLICE
#define CONFIGURE_TICKS_PER_TIMESLICE 50
#endif
/**@}*/ /* end of General Configuration */
/*
* Initial Extension Set
*/
#ifdef CONFIGURE_INIT
#ifdef CONFIGURE_STACK_CHECKER_ENABLED
#include <rtems/stackchk.h>
#endif
#include <rtems/libcsupport.h>
#if defined(BSP_INITIAL_EXTENSION) || \
defined(CONFIGURE_INITIAL_EXTENSIONS) || \
defined(CONFIGURE_STACK_CHECKER_ENABLED) || \
(defined(RTEMS_NEWLIB) && !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY))
static const rtems_extensions_table Configuration_Initial_Extensions[] = {
#if !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY)
RTEMS_NEWLIB_EXTENSION,
#endif
#if defined(CONFIGURE_STACK_CHECKER_ENABLED)
RTEMS_STACK_CHECKER_EXTENSION,
#endif
#if defined(CONFIGURE_INITIAL_EXTENSIONS)
CONFIGURE_INITIAL_EXTENSIONS,
#endif
#if defined(BSP_INITIAL_EXTENSION)
BSP_INITIAL_EXTENSION
#endif
};
#define _CONFIGURE_INITIAL_EXTENSION_TABLE Configuration_Initial_Extensions
#define _CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS \
RTEMS_ARRAY_SIZE(Configuration_Initial_Extensions)
RTEMS_SYSINIT_ITEM(
_User_extensions_Handler_initialization,
RTEMS_SYSINIT_INITIAL_EXTENSIONS,
RTEMS_SYSINIT_ORDER_MIDDLE
);
#else
#define _CONFIGURE_INITIAL_EXTENSION_TABLE NULL
#define _CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS 0
#endif
#if defined(RTEMS_NEWLIB) && !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY)
struct _reent *__getreent(void)
{
return _Thread_Get_executing()->libc_reent;
}
#endif
#endif
/**
* @defgroup ConfigurationPOSIXAPI POSIX API Configuration Parameters
*
* This module contains the parameters related to configuration
* of the POSIX API services.
*/
/**@{*/
/**
* This configuration parameter specifies the maximum number of
* POSIX API keys.
*
* POSIX Keys are available whether or not the POSIX API is enabled.
*/
#ifndef CONFIGURE_MAXIMUM_POSIX_KEYS
#define CONFIGURE_MAXIMUM_POSIX_KEYS 0
#endif
/*
* This macro is calculated to specify the memory required for
* POSIX API key/value pairs.
*/
#ifndef CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS
#define CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS \
(CONFIGURE_MAXIMUM_POSIX_KEYS * \
(CONFIGURE_MAXIMUM_POSIX_THREADS + CONFIGURE_MAXIMUM_TASKS))
#endif
/*
* This macro is calculated to specify the total number of
* POSIX API keys required by the application and configured
* system capabilities.
*/
#define _CONFIGURE_POSIX_KEYS \
(CONFIGURE_MAXIMUM_POSIX_KEYS + _CONFIGURE_LIBIO_POSIX_KEYS)
/*
* This macro is calculated to specify the memory required for
* POSIX API keys.
*/
#define _CONFIGURE_MEMORY_FOR_POSIX_KEYS(_keys, _key_value_pairs) \
(_Configure_Object_RAM(_keys, sizeof(POSIX_Keys_Control) ) \
+ _Configure_From_workspace( \
_Configure_Max_Objects(_key_value_pairs) \
* sizeof(POSIX_Keys_Key_value_pair)))
/**
* This configuration parameter specifies the maximum number of
* POSIX API threads.
*/
#ifndef CONFIGURE_MAXIMUM_POSIX_THREADS
#define CONFIGURE_MAXIMUM_POSIX_THREADS 0
#endif
/*
* Account for the object control structures plus the name
* of the object to be duplicated.
*/
#define _Configure_POSIX_Named_Object_RAM(_number, _size) \
(_Configure_Object_RAM(_number, _size) \
+ _Configure_Max_Objects(_number) \
* _Configure_From_workspace(_POSIX_PATH_MAX + 1))
/**
* This configuration parameter specifies the maximum number of
* POSIX API message queues.
*/
#ifndef CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES
#define CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES 0
#endif
/*
* This macro is calculated to specify the memory required for
* POSIX API message queues.
*/
#define _CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUES(_message_queues) \
_Configure_POSIX_Named_Object_RAM( \
_message_queues, sizeof(POSIX_Message_queue_Control) )
/**
* This configuration parameter specifies the maximum number of
* POSIX API semaphores.
*/
#ifndef CONFIGURE_MAXIMUM_POSIX_SEMAPHORES
#define CONFIGURE_MAXIMUM_POSIX_SEMAPHORES 0
#endif
/*
* This macro is calculated to specify the memory required for
* POSIX API semaphores.
*/
#define _CONFIGURE_MEMORY_FOR_POSIX_SEMAPHORES(_semaphores) \
_Configure_POSIX_Named_Object_RAM( \
_semaphores, sizeof(POSIX_Semaphore_Control) )
/**
* Configure the maximum number of POSIX shared memory objects.
*/
#ifndef CONFIGURE_MAXIMUM_POSIX_SHMS
#define CONFIGURE_MAXIMUM_POSIX_SHMS 0
#endif
/*
* This macro is calculated to specify the memory required for
* POSIX API shared memory.
*/
#define _CONFIGURE_MEMORY_FOR_POSIX_SHMS(_shms) \
_Configure_POSIX_Named_Object_RAM(_shms, sizeof(POSIX_Shm_Control) )
/*
* The rest of the POSIX threads API features are only available when
* POSIX is enabled.
*/
#ifdef RTEMS_POSIX_API
#include <sys/types.h>
#include <signal.h>
#include <rtems/posix/psignal.h>
#include <rtems/posix/threadsup.h>
#include <rtems/posix/timer.h>
/**
* This configuration parameter specifies the maximum number of
* POSIX API timers.
*/
#ifndef CONFIGURE_MAXIMUM_POSIX_TIMERS
#define CONFIGURE_MAXIMUM_POSIX_TIMERS 0
#endif
/*
* This macro is calculated to specify the memory required for
* POSIX API timers.
*/
#define _CONFIGURE_MEMORY_FOR_POSIX_TIMERS(_timers) \
_Configure_Object_RAM(_timers, sizeof(POSIX_Timer_Control) )
/**
* This configuration parameter specifies the maximum number of
* POSIX API queued signals.
*/
#ifndef CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS
#define CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS 0
#endif
/*
* This macro is calculated to specify the memory required for
* POSIX API queued signals.
*/
#define _CONFIGURE_MEMORY_FOR_POSIX_QUEUED_SIGNALS(_queued_signals) \
_Configure_From_workspace( \
(_queued_signals) * (sizeof(POSIX_signals_Siginfo_node)) )
#endif /* RTEMS_POSIX_API */
#ifdef CONFIGURE_POSIX_INIT_THREAD_TABLE
#ifndef CONFIGURE_POSIX_HAS_OWN_INIT_THREAD_TABLE
#ifndef CONFIGURE_POSIX_INIT_THREAD_ENTRY_POINT
#define CONFIGURE_POSIX_INIT_THREAD_ENTRY_POINT POSIX_Init
#endif
#ifndef CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE
#define CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE \
CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE
#endif
#ifdef CONFIGURE_INIT
posix_initialization_threads_table POSIX_Initialization_threads[] = {
{ CONFIGURE_POSIX_INIT_THREAD_ENTRY_POINT,
CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE }
};
#endif
#define CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME \
POSIX_Initialization_threads
#define CONFIGURE_POSIX_INIT_THREAD_TABLE_SIZE \
RTEMS_ARRAY_SIZE(CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME)
#endif /* !CONFIGURE_POSIX_HAS_OWN_INIT_TASK_TABLE */
#else /* !CONFIGURE_POSIX_INIT_THREAD_TABLE */
#define CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME NULL
#define CONFIGURE_POSIX_INIT_THREAD_TABLE_SIZE 0
#endif /* CONFIGURE_POSIX_INIT_THREAD_TABLE */
/**
* This configuration parameter specifies the stack size of the
* POSIX API Initialization thread (if used).
*/
#ifndef CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE
#define CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE 0
#endif
/**@}*/ /* end of POSIX API Configuration */
/**
* @defgroup ConfigurationGNAT GNAT/RTEMS Configuration
*
* @addtogroup Configuration
*
* This modules includes configuration parameters for applications which
* use GNAT/RTEMS. GNAT implements each Ada task as a POSIX thread.
*/
/**@{*/
#ifdef CONFIGURE_GNAT_RTEMS
/**
* This is the maximum number of Ada tasks which can be concurrently
* in existence. Twenty (20) are required to run all tests in the
* ACATS (formerly ACVC).
*/
#ifndef CONFIGURE_MAXIMUM_ADA_TASKS
#define CONFIGURE_MAXIMUM_ADA_TASKS 20
#endif
/**
* This is the number of non-Ada tasks which invoked Ada code.
*/
#ifndef CONFIGURE_MAXIMUM_FAKE_ADA_TASKS
#define CONFIGURE_MAXIMUM_FAKE_ADA_TASKS 0
#endif
#else
/** This defines he number of POSIX mutexes GNAT needs. */
/** This defines he number of Ada tasks needed by the application. */
#define CONFIGURE_MAXIMUM_ADA_TASKS 0
/**
* This defines he number of non-Ada tasks/threads that will invoke
* Ada subprograms or functions.
*/
#define CONFIGURE_MAXIMUM_FAKE_ADA_TASKS 0
#endif
/**@}*/ /* end of GNAT Configuration */
/**
* @defgroup ConfigurationGo GCC Go Configuration
*
* @addtogroup Configuration
*
* This modules includes configuration parameters for applications which
* use GCC Go.
*/
/**@{*/
#ifdef CONFIGURE_ENABLE_GO
#ifndef CONFIGURE_MAXIMUM_POSIX_THREADS
#define CONFIGURE_MAXIMUM_POSIX_THREADS 1
#endif
#ifndef CONFIGURE_MAXIMUM_GOROUTINES
#define CONFIGURE_MAXIMUM_GOROUTINES 400
#endif
#ifndef CONFIGURE_MAXIMUM_GO_CHANNELS
#define CONFIGURE_MAXIMUM_GO_CHANNELS 500
#endif
#else
/** This specifies the maximum number of Go co-routines. */
#define CONFIGURE_MAXIMUM_GOROUTINES 0
/** This specifies the maximum number of Go channels required. */
#define CONFIGURE_MAXIMUM_GO_CHANNELS 0
#endif
/**@}*/ /* end of Go Configuration */
/**
* This is so we can account for tasks with stacks greater than minimum
* size. This is in bytes.
*/
#ifndef CONFIGURE_EXTRA_TASK_STACKS
#define CONFIGURE_EXTRA_TASK_STACKS 0
#endif
/**
* This macro provides a summation of the various POSIX thread requirements.
*/
#define _CONFIGURE_POSIX_THREADS \
(CONFIGURE_MAXIMUM_POSIX_THREADS + \
CONFIGURE_MAXIMUM_ADA_TASKS + \
CONFIGURE_MAXIMUM_GOROUTINES)
#ifdef RTEMS_POSIX_API
/*
* This macro is calculated to specify the memory required for
* the POSIX API in its entirety.
*/
#define _CONFIGURE_MEMORY_FOR_POSIX \
(_CONFIGURE_MEMORY_FOR_POSIX_QUEUED_SIGNALS( \
CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS) + \
_CONFIGURE_MEMORY_FOR_POSIX_TIMERS(CONFIGURE_MAXIMUM_POSIX_TIMERS))
#else
/*
* This macro is calculated to specify the memory required for
* the POSIX API in its entirety.
*/
#define _CONFIGURE_MEMORY_FOR_POSIX 0
#endif
/*
* We must be able to split the free block used for the second last allocation
* into two parts so that we have a free block for the last allocation. See
* _Heap_Block_split().
*/
#define _CONFIGURE_HEAP_HANDLER_OVERHEAD \
_Configure_Align_up( HEAP_BLOCK_HEADER_SIZE, CPU_HEAP_ALIGNMENT )
/*
* Calculate the RAM size based on the maximum number of objects configured.
*/
#ifndef CONFIGURE_EXECUTIVE_RAM_SIZE
/*
* Account for allocating the following per object
* + array of object control structures
* + local pointer table -- pointer per object plus a zero'th
* entry in the local pointer table.
*/
#define _CONFIGURE_MEMORY_FOR_TASKS(_tasks, _number_FP_tasks) \
( \
_Configure_Object_RAM(_tasks, sizeof(Configuration_Thread_control)) \
+ _Configure_From_workspace(_Configure_Max_Objects(_tasks) \
* THREAD_QUEUE_HEADS_SIZE(_CONFIGURE_SCHEDULER_COUNT)) \
+ _Configure_Max_Objects(_number_FP_tasks) \
* _Configure_From_workspace(CONTEXT_FP_SIZE) \
)
/*
* This defines the amount of memory configured for the multiprocessing
* support required by this application.
*/
#ifdef CONFIGURE_MP_APPLICATION
#define _CONFIGURE_MEMORY_FOR_MP \
(_CONFIGURE_MEMORY_FOR_PROXIES(CONFIGURE_MP_MAXIMUM_PROXIES) + \
_CONFIGURE_MEMORY_FOR_GLOBAL_OBJECTS(CONFIGURE_MP_MAXIMUM_GLOBAL_OBJECTS))
#else
#define _CONFIGURE_MEMORY_FOR_MP 0
#endif
/**
* The following macro is used to calculate the memory allocated by RTEMS
* for the message buffers associated with a particular message queue.
* There is a fixed amount of overhead per message.
*/
#define CONFIGURE_MESSAGE_BUFFERS_FOR_QUEUE(_messages, _size) \
_Configure_From_workspace( \
(_messages) * (_Configure_Align_up(_size, sizeof(uintptr_t)) \
+ sizeof(CORE_message_queue_Buffer_control)))
/*
* This macro is set to the amount of memory required for pending message
* buffers in bytes. It should be constructed by adding together a
* set of values determined by CONFIGURE_MESSAGE_BUFFERS_FOR_QUEUE.
*/
#ifndef CONFIGURE_MESSAGE_BUFFER_MEMORY
#define CONFIGURE_MESSAGE_BUFFER_MEMORY 0
#endif
/**
* This macro is available just in case the confdefs.h file underallocates
* memory for a particular application. This lets the user add some extra
* memory in case something broken and underestimates.
*
* It is also possible for cases where confdefs.h overallocates memory,
* you could substract memory from the allocated. The estimate is just
* that, an estimate, and assumes worst case alignment and padding on
* each allocated element. So in some cases it could be too conservative.
*
* NOTE: Historically this was used for message buffers.
*/
#ifndef CONFIGURE_MEMORY_OVERHEAD
#define CONFIGURE_MEMORY_OVERHEAD 0
#endif
/**
* This calculates the amount of memory reserved for the IDLE tasks.
* In an SMP system, each CPU core has its own idle task.
*/
#define _CONFIGURE_IDLE_TASKS_COUNT _CONFIGURE_MAXIMUM_PROCESSORS
/**
* This defines the formula used to compute the amount of memory
* reserved for internal task control structures.
*/
#if CPU_IDLE_TASK_IS_FP == TRUE
#define _CONFIGURE_MEMORY_FOR_INTERNAL_TASKS \
_CONFIGURE_MEMORY_FOR_TASKS( \
_CONFIGURE_IDLE_TASKS_COUNT + _CONFIGURE_MPCI_RECEIVE_SERVER_COUNT, \
_CONFIGURE_IDLE_TASKS_COUNT + _CONFIGURE_MPCI_RECEIVE_SERVER_COUNT \
)
#else
#define _CONFIGURE_MEMORY_FOR_INTERNAL_TASKS \
_CONFIGURE_MEMORY_FOR_TASKS( \
_CONFIGURE_IDLE_TASKS_COUNT + _CONFIGURE_MPCI_RECEIVE_SERVER_COUNT, \
_CONFIGURE_MPCI_RECEIVE_SERVER_COUNT \
)
#endif
/**
* This macro accounts for general RTEMS system overhead.
*/
#define _CONFIGURE_MEMORY_FOR_SYSTEM_OVERHEAD \
_CONFIGURE_MEMORY_FOR_INTERNAL_TASKS
/**
* This macro reserves the memory required by the statically configured
* user extensions.
*/
#define _CONFIGURE_MEMORY_FOR_STATIC_EXTENSIONS \
(_CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS == 0 ? 0 : \
_Configure_From_workspace( \
_CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS \
* sizeof(User_extensions_Switch_control) \
))
/**
* This macro provides a summation of the memory required by the
* Classic API as configured.
*/
#define _CONFIGURE_MEMORY_FOR_CLASSIC \
(_CONFIGURE_MEMORY_FOR_TIMERS(CONFIGURE_MAXIMUM_TIMERS + \
_CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER ) + \
_CONFIGURE_MEMORY_FOR_SEMAPHORES(CONFIGURE_MAXIMUM_SEMAPHORES) + \
_CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(CONFIGURE_MAXIMUM_MESSAGE_QUEUES) + \
_CONFIGURE_MEMORY_FOR_PARTITIONS(CONFIGURE_MAXIMUM_PARTITIONS) + \
_CONFIGURE_MEMORY_FOR_REGIONS( CONFIGURE_MAXIMUM_REGIONS ) + \
_CONFIGURE_MEMORY_FOR_PORTS(CONFIGURE_MAXIMUM_PORTS) + \
_CONFIGURE_MEMORY_FOR_PERIODS(CONFIGURE_MAXIMUM_PERIODS) + \
_CONFIGURE_MEMORY_FOR_BARRIERS(_CONFIGURE_BARRIERS) + \
_CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(CONFIGURE_MAXIMUM_USER_EXTENSIONS) \
)
/**
* This calculates the memory required for the executive workspace.
*
* This is an internal parameter.
*/
#define CONFIGURE_EXECUTIVE_RAM_SIZE \
( \
_CONFIGURE_MEMORY_FOR_SYSTEM_OVERHEAD + \
_CONFIGURE_MEMORY_FOR_TASKS( \
_CONFIGURE_TASKS, _CONFIGURE_TASKS) + \
_CONFIGURE_MEMORY_FOR_TASKS( \
_CONFIGURE_POSIX_THREADS, _CONFIGURE_POSIX_THREADS) + \
_CONFIGURE_MEMORY_FOR_CLASSIC + \
_CONFIGURE_MEMORY_FOR_POSIX_KEYS( \
_CONFIGURE_POSIX_KEYS, \
CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS ) + \
_CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUES( \
CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES) + \
_CONFIGURE_MEMORY_FOR_POSIX_SEMAPHORES( \
CONFIGURE_MAXIMUM_POSIX_SEMAPHORES) + \
_CONFIGURE_MEMORY_FOR_POSIX_SHMS( \
CONFIGURE_MAXIMUM_POSIX_SHMS) + \
_CONFIGURE_MEMORY_FOR_POSIX + \
_CONFIGURE_MEMORY_FOR_STATIC_EXTENSIONS + \
_CONFIGURE_MEMORY_FOR_MP + \
CONFIGURE_MESSAGE_BUFFER_MEMORY + \
(CONFIGURE_MEMORY_OVERHEAD * 1024) + \
_CONFIGURE_HEAP_HANDLER_OVERHEAD \
)
/*
* Now account for any extra memory that initialization tasks or threads
* may have requested.
*/
/*
* This accounts for any extra memory required by the Classic API
* Initialization Task.
*/
#if (CONFIGURE_INIT_TASK_STACK_SIZE > CONFIGURE_MINIMUM_TASK_STACK_SIZE)
#define _CONFIGURE_INITIALIZATION_THREADS_STACKS_CLASSIC_PART \
(CONFIGURE_INIT_TASK_STACK_SIZE - CONFIGURE_MINIMUM_TASK_STACK_SIZE)
#else
#define _CONFIGURE_INITIALIZATION_THREADS_STACKS_CLASSIC_PART 0
#endif
/*
* This accounts for any extra memory required by the POSIX API
* Initialization Thread.
*/
#if (CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE > \
CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE)
#define _CONFIGURE_INITIALIZATION_THREADS_STACKS_POSIX_PART \
(CONFIGURE_POSIX_INIT_THREAD_STACK_SIZE - \
CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE)
#else
#define _CONFIGURE_INITIALIZATION_THREADS_STACKS_POSIX_PART 0
#endif
/*
* This macro provides a summation of the various initialization task
* and thread stack requirements.
*/
#define _CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS \
(_CONFIGURE_INITIALIZATION_THREADS_STACKS_CLASSIC_PART + \
_CONFIGURE_INITIALIZATION_THREADS_STACKS_POSIX_PART)
/*
* This macro is calculated to specify the memory required for
* the Idle tasks(s) stack.
*/
#define _CONFIGURE_IDLE_TASKS_STACK \
(_CONFIGURE_IDLE_TASKS_COUNT * \
_Configure_From_stackspace( CONFIGURE_IDLE_TASK_STACK_SIZE ) )
/*
* This macro is calculated to specify the stack memory required for the MPCI
* task.
*/
#define _CONFIGURE_MPCI_RECEIVE_SERVER_STACK \
(_CONFIGURE_MPCI_RECEIVE_SERVER_COUNT * \
_Configure_From_stackspace(CONFIGURE_MINIMUM_TASK_STACK_SIZE))
/*
* This macro is calculated to specify the memory required for
* the stacks of all tasks.
*/
#define _CONFIGURE_TASKS_STACK \
(_Configure_Max_Objects( _CONFIGURE_TASKS ) * \
_Configure_From_stackspace( CONFIGURE_MINIMUM_TASK_STACK_SIZE ) )
/*
* This macro is calculated to specify the memory required for
* the stacks of all POSIX threads.
*/
#define _CONFIGURE_POSIX_THREADS_STACK \
(_Configure_Max_Objects( CONFIGURE_MAXIMUM_POSIX_THREADS ) * \
_Configure_From_stackspace( CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE ) )
/*
* This macro is calculated to specify the memory required for
* the stacks of all Ada tasks.
*/
#define _CONFIGURE_ADA_TASKS_STACK \
(_Configure_Max_Objects( CONFIGURE_MAXIMUM_ADA_TASKS ) * \
_Configure_From_stackspace( CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE ) )
/*
* This macro is calculated to specify the memory required for
* the stacks of all Go routines.
*/
#define _CONFIGURE_GOROUTINES_STACK \
(_Configure_Max_Objects( CONFIGURE_MAXIMUM_GOROUTINES ) * \
_Configure_From_stackspace( CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE ) )
#else /* CONFIGURE_EXECUTIVE_RAM_SIZE */
#define _CONFIGURE_IDLE_TASKS_STACK 0
#define _CONFIGURE_MPCI_RECEIVE_SERVER_STACK 0
#define _CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS 0
#define _CONFIGURE_TASKS_STACK 0
#define _CONFIGURE_POSIX_THREADS_STACK 0
#define _CONFIGURE_GOROUTINES_STACK 0
#define _CONFIGURE_ADA_TASKS_STACK 0
#if CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK != 0
#error "CONFIGURE_EXECUTIVE_RAM_SIZE defined with request for CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK"
#endif
#if CONFIGURE_EXTRA_TASK_STACKS != 0
#error "CONFIGURE_EXECUTIVE_RAM_SIZE defined with request for CONFIGURE_EXTRA_TASK_STACKS"
#endif
#endif /* CONFIGURE_EXECUTIVE_RAM_SIZE */
/*
* This macro is calculated to specify the memory required for
* all tasks and threads of all varieties.
*/
#define _CONFIGURE_STACK_SPACE_SIZE \
( \
_CONFIGURE_IDLE_TASKS_STACK + \
_CONFIGURE_MPCI_RECEIVE_SERVER_STACK + \
_CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS + \
_CONFIGURE_TASKS_STACK + \
_CONFIGURE_POSIX_THREADS_STACK + \
_CONFIGURE_GOROUTINES_STACK + \
_CONFIGURE_ADA_TASKS_STACK + \
CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK + \
_CONFIGURE_LIBBLOCK_TASK_EXTRA_STACKS + \
CONFIGURE_EXTRA_TASK_STACKS + \
_CONFIGURE_HEAP_HANDLER_OVERHEAD \
)
#ifndef CONFIGURE_MAXIMUM_THREAD_NAME_SIZE
#define CONFIGURE_MAXIMUM_THREAD_NAME_SIZE 16
#endif
#ifdef CONFIGURE_INIT
typedef union {
Scheduler_Node Base;
#ifdef CONFIGURE_SCHEDULER_CBS
Scheduler_CBS_Node CBS;
#endif
#ifdef CONFIGURE_SCHEDULER_EDF
Scheduler_EDF_Node EDF;
#endif
#ifdef CONFIGURE_SCHEDULER_EDF_SMP
Scheduler_EDF_SMP_Node EDF_SMP;
#endif
#ifdef CONFIGURE_SCHEDULER_PRIORITY
Scheduler_priority_Node Priority;
#endif
#ifdef CONFIGURE_SCHEDULER_SIMPLE_SMP
Scheduler_SMP_Node Simple_SMP;
#endif
#ifdef CONFIGURE_SCHEDULER_PRIORITY_SMP
Scheduler_priority_SMP_Node Priority_SMP;
#endif
#ifdef CONFIGURE_SCHEDULER_PRIORITY_AFFINITY_SMP
Scheduler_priority_affinity_SMP_Node Priority_affinity_SMP;
#endif
#ifdef CONFIGURE_SCHEDULER_STRONG_APA
Scheduler_strong_APA_Node Strong_APA;
#endif
#ifdef CONFIGURE_SCHEDULER_USER_PER_THREAD
CONFIGURE_SCHEDULER_USER_PER_THREAD User;
#endif
} Configuration_Scheduler_node;
#ifdef RTEMS_SMP
const size_t _Scheduler_Node_size = sizeof( Configuration_Scheduler_node );
#endif
const size_t _Thread_Maximum_name_size = CONFIGURE_MAXIMUM_THREAD_NAME_SIZE;
typedef struct {
Thread_Control Control;
#if CONFIGURE_MAXIMUM_USER_EXTENSIONS > 0
void *extensions[ CONFIGURE_MAXIMUM_USER_EXTENSIONS + 1 ];
#endif
Configuration_Scheduler_node Scheduler_nodes[ _CONFIGURE_SCHEDULER_COUNT ];
RTEMS_API_Control API_RTEMS;
#ifdef RTEMS_POSIX_API
POSIX_API_Control API_POSIX;
#endif
#if CONFIGURE_MAXIMUM_THREAD_NAME_SIZE > 1
char name[ CONFIGURE_MAXIMUM_THREAD_NAME_SIZE ];
#endif
#if !defined(RTEMS_SCHEDSIM) \
&& defined(RTEMS_NEWLIB) \
&& !defined(CONFIGURE_DISABLE_NEWLIB_REENTRANCY)
struct _reent Newlib;
#else
struct { /* Empty */ } Newlib;
#endif
} Configuration_Thread_control;
const size_t _Thread_Control_size = sizeof( Configuration_Thread_control );
const Thread_Control_add_on _Thread_Control_add_ons[] = {
{
offsetof( Configuration_Thread_control, Control.Scheduler.nodes ),
offsetof( Configuration_Thread_control, Scheduler_nodes )
}, {
offsetof(
Configuration_Thread_control,
Control.API_Extensions[ THREAD_API_RTEMS ]
),
offsetof( Configuration_Thread_control, API_RTEMS )
}, {
offsetof(
Configuration_Thread_control,
Control.libc_reent
),
offsetof( Configuration_Thread_control, Newlib )
}
#if CONFIGURE_MAXIMUM_THREAD_NAME_SIZE > 1
, {
offsetof(
Configuration_Thread_control,
Control.Join_queue.Queue.name
),
offsetof( Configuration_Thread_control, name )
}
#endif
#ifdef RTEMS_POSIX_API
, {
offsetof(
Configuration_Thread_control,
Control.API_Extensions[ THREAD_API_POSIX ]
),
offsetof( Configuration_Thread_control, API_POSIX )
}
#endif
};
const size_t _Thread_Control_add_on_count =
RTEMS_ARRAY_SIZE( _Thread_Control_add_ons );
const uint32_t _Watchdog_Nanoseconds_per_tick =
1000 * CONFIGURE_MICROSECONDS_PER_TICK;
const uint32_t _Watchdog_Ticks_per_second = _CONFIGURE_TICKS_PER_SECOND;
/**
* This is the Classic API Configuration Table.
*/
rtems_api_configuration_table Configuration_RTEMS_API = {
_CONFIGURE_TASKS,
CONFIGURE_MAXIMUM_TIMERS + _CONFIGURE_TIMER_FOR_SHARED_MEMORY_DRIVER,
CONFIGURE_MAXIMUM_SEMAPHORES,
CONFIGURE_MAXIMUM_MESSAGE_QUEUES,
CONFIGURE_MAXIMUM_PARTITIONS,
CONFIGURE_MAXIMUM_REGIONS,
CONFIGURE_MAXIMUM_PORTS,
CONFIGURE_MAXIMUM_PERIODS,
_CONFIGURE_BARRIERS,
CONFIGURE_INIT_TASK_TABLE_SIZE,
CONFIGURE_INIT_TASK_TABLE
};
#if CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES > 0
const uint32_t _Configuration_POSIX_Maximum_message_queues =
CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES;
#endif
#if CONFIGURE_MAXIMUM_POSIX_SEMAPHORES > 0
const uint32_t _Configuration_POSIX_Maximum_named_semaphores =
CONFIGURE_MAXIMUM_POSIX_SEMAPHORES;
#endif
#if CONFIGURE_MAXIMUM_POSIX_SHMS > 0
const uint32_t _Configuration_POSIX_Maximum_shms =
CONFIGURE_MAXIMUM_POSIX_SHMS;
#endif
#if _CONFIGURE_POSIX_THREADS > 0
const uint32_t _Configuration_POSIX_Maximum_threads =
_CONFIGURE_POSIX_THREADS;
#endif
#ifdef RTEMS_POSIX_API
#if CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS > 0
const uint32_t _Configuration_POSIX_Maximum_queued_signals =
CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS;
#endif
#if CONFIGURE_MAXIMUM_POSIX_TIMERS > 0
const uint32_t _Configuration_POSIX_Maximum_timers =
CONFIGURE_MAXIMUM_POSIX_TIMERS;
#endif
#endif
const size_t _Configuration_POSIX_Minimum_stack_size =
CONFIGURE_MINIMUM_POSIX_THREAD_STACK_SIZE;
/**
* This variable specifies the minimum stack size for tasks in an RTEMS
* application.
*
* NOTE: This is left as a simple uint32_t so it can be externed as
* needed without requring being high enough logical to
* include the full configuration table.
*/
uint32_t rtems_minimum_stack_size =
CONFIGURE_MINIMUM_TASK_STACK_SIZE;
/**
* This is the primary Configuration Table for this application.
*/
const rtems_configuration_table Configuration = {
CONFIGURE_EXECUTIVE_RAM_SIZE, /* required RTEMS workspace */
_CONFIGURE_STACK_SPACE_SIZE, /* required stack space */
CONFIGURE_MAXIMUM_USER_EXTENSIONS, /* maximum dynamic extensions */
_CONFIGURE_POSIX_KEYS, /* POSIX keys are always */
CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS, /* enabled */
CONFIGURE_MICROSECONDS_PER_TICK, /* microseconds per clock tick */
CONFIGURE_TICKS_PER_TIMESLICE, /* ticks per timeslice quantum */
CONFIGURE_IDLE_TASK_BODY, /* user's IDLE task */
CONFIGURE_IDLE_TASK_STACK_SIZE, /* IDLE task stack size */
CONFIGURE_TASK_STACK_ALLOCATOR_INIT, /* stack allocator init */
CONFIGURE_TASK_STACK_ALLOCATOR, /* stack allocator */
CONFIGURE_TASK_STACK_DEALLOCATOR, /* stack deallocator */
CONFIGURE_ZERO_WORKSPACE_AUTOMATICALLY, /* true to clear memory */
#ifdef CONFIGURE_UNIFIED_WORK_AREAS /* true for unified work areas */
true,
#else
false,
#endif
#ifdef CONFIGURE_TASK_STACK_ALLOCATOR_AVOIDS_WORK_SPACE /* true to avoid
work space for thread stack
allocation */
true,
#else
false,
#endif
#ifdef RTEMS_SMP
#ifdef _CONFIGURE_SMP_APPLICATION
true,
#else
false,
#endif
#endif
_CONFIGURE_NUMBER_OF_INITIAL_EXTENSIONS, /* number of static extensions */
_CONFIGURE_INITIAL_EXTENSION_TABLE, /* pointer to static extensions */
#if defined(RTEMS_MULTIPROCESSING)
CONFIGURE_MULTIPROCESSING_TABLE, /* pointer to MP config table */
#endif
#ifdef RTEMS_SMP
_CONFIGURE_MAXIMUM_PROCESSORS,
#endif
};
#endif
#if defined(RTEMS_SMP)
/*
* Instantiate the Per CPU information based upon the user configuration.
*/
#if defined(CONFIGURE_INIT)
Per_CPU_Control_envelope _Per_CPU_Information[_CONFIGURE_MAXIMUM_PROCESSORS];
#endif
#endif
/*
* If the user has configured a set of Classic API Initialization Tasks,
* then we need to install the code that runs that loop.
*/
#ifdef CONFIGURE_INIT
#if defined(CONFIGURE_RTEMS_INIT_TASKS_TABLE) || \
defined(CONFIGURE_HAS_OWN_INIT_TASK_TABLE)
RTEMS_SYSINIT_ITEM(
_RTEMS_tasks_Initialize_user_tasks_body,
RTEMS_SYSINIT_CLASSIC_USER_TASKS,
RTEMS_SYSINIT_ORDER_MIDDLE
);
#endif
#endif
/*
* If the user has configured a set of POSIX Initialization Threads,
* then we need to install the code that runs that loop.
*/
#ifdef CONFIGURE_INIT
#if defined(CONFIGURE_POSIX_INIT_THREAD_TABLE) || \
defined(CONFIGURE_POSIX_HAS_OWN_INIT_THREAD_TABLE)
posix_initialization_threads_table * const
_Configuration_POSIX_Initialization_threads =
CONFIGURE_POSIX_INIT_THREAD_TABLE_NAME;
const size_t _Configuration_POSIX_Initialization_thread_count =
CONFIGURE_POSIX_INIT_THREAD_TABLE_SIZE;
RTEMS_SYSINIT_ITEM(
_POSIX_Threads_Initialize_user_threads_body,
RTEMS_SYSINIT_POSIX_USER_THREADS,
RTEMS_SYSINIT_ORDER_MIDDLE
);
#endif
#endif
/*
* Select PCI Configuration Library
*/
#ifdef RTEMS_PCI_CONFIG_LIB
#ifdef CONFIGURE_INIT
#define PCI_LIB_NONE 0
#define PCI_LIB_AUTO 1
#define PCI_LIB_STATIC 2
#define PCI_LIB_READ 3
#define PCI_LIB_PERIPHERAL 4
#if CONFIGURE_PCI_LIB == PCI_LIB_AUTO
#define PCI_CFG_AUTO_LIB
#include <pci/cfg.h>
struct pci_bus pci_hb;
#define PCI_LIB_INIT pci_config_auto
#define PCI_LIB_CONFIG pci_config_auto_register
#elif CONFIGURE_PCI_LIB == PCI_LIB_STATIC
#define PCI_CFG_STATIC_LIB
#include <pci/cfg.h>
#define PCI_LIB_INIT pci_config_static
#define PCI_LIB_CONFIG NULL
/* Let user define PCI configuration (struct pci_bus pci_hb) */
#elif CONFIGURE_PCI_LIB == PCI_LIB_READ
#define PCI_CFG_READ_LIB
#include <pci/cfg.h>
#define PCI_LIB_INIT pci_config_read
#define PCI_LIB_CONFIG NULL
struct pci_bus pci_hb;
#elif CONFIGURE_PCI_LIB == PCI_LIB_PERIPHERAL
#define PCI_LIB_INIT pci_config_peripheral
#define PCI_LIB_CONFIG NULL
/* Let user define PCI configuration (struct pci_bus pci_hb) */
#elif CONFIGURE_PCI_LIB == PCI_LIB_NONE
#define PCI_LIB_INIT NULL
#define PCI_LIB_CONFIG NULL
/* No PCI Configuration at all, user can use/debug access routines */
#else
#error NO PCI LIBRARY DEFINED
#endif
const int pci_config_lib_type = CONFIGURE_PCI_LIB;
int (*pci_config_lib_init)(void) = PCI_LIB_INIT;
void (*pci_config_lib_register)(void *config) = PCI_LIB_CONFIG;
#endif
#endif
#ifdef __cplusplus
}
#endif
/******************************************************************
******************************************************************
******************************************************************
* CONFIGURATION WARNINGS AND ERROR CHECKING *
******************************************************************
******************************************************************
******************************************************************
*/
#if defined(CONFIGURE_CONFDEFS_DEBUG) && defined(CONFIGURE_INIT)
/**
* This is a debug mechanism, so if you need to, the executable will
* have a structure with various partial values. Add to this as you
* need to. Viewing this structure in gdb combined with dumping
* the Configuration structures generated should help a lot in tracing
* down errors and analyzing where over and under allocations are.
*/
typedef struct {
uint32_t SYSTEM_OVERHEAD;
uint32_t STATIC_EXTENSIONS;
uint32_t INITIALIZATION_THREADS_STACKS;
uint32_t PER_INTEGER_TASK;
uint32_t FP_OVERHEAD;
uint32_t CLASSIC;
uint32_t POSIX;
/* System overhead pieces */
uint32_t MEMORY_FOR_IDLE_TASK;
/* Classic API Pieces */
uint32_t CLASSIC_TASKS;
uint32_t TIMERS;
uint32_t SEMAPHORES;
uint32_t MESSAGE_QUEUES;
uint32_t PARTITIONS;
uint32_t REGIONS;
uint32_t PORTS;
uint32_t PERIODS;
uint32_t BARRIERS;
uint32_t USER_EXTENSIONS;
/* POSIX API managers that are always enabled */
uint32_t POSIX_KEYS;
/* POSIX API Pieces */
#ifdef RTEMS_POSIX_API
uint32_t POSIX_TIMERS;
uint32_t POSIX_QUEUED_SIGNALS;
#endif
uint32_t POSIX_MESSAGE_QUEUES;
uint32_t POSIX_SEMAPHORES;
uint32_t POSIX_SHMS;
/* Stack space sizes */
uint32_t IDLE_TASKS_STACK;
uint32_t INITIALIZATION_THREADS_EXTRA_STACKS;
uint32_t TASKS_STACK;
uint32_t POSIX_THREADS_STACK;
uint32_t GOROUTINES_STACK;
uint32_t ADA_TASKS_STACK;
uint32_t EXTRA_MPCI_RECEIVE_SERVER_STACK;
uint32_t EXTRA_TASK_STACKS;
} Configuration_Debug_t;
Configuration_Debug_t Configuration_Memory_Debug = {
/* General Information */
_CONFIGURE_MEMORY_FOR_SYSTEM_OVERHEAD,
_CONFIGURE_MEMORY_FOR_STATIC_EXTENSIONS,
_CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS,
_CONFIGURE_MEMORY_FOR_TASKS(1, 0),
_CONFIGURE_MEMORY_FOR_TASKS(0, 1),
_CONFIGURE_MEMORY_FOR_CLASSIC,
_CONFIGURE_MEMORY_FOR_POSIX,
/* System overhead pieces */
_CONFIGURE_MEMORY_FOR_INTERNAL_TASKS,
/* Classic API Pieces */
_CONFIGURE_MEMORY_FOR_TASKS(CONFIGURE_MAXIMUM_TASKS, 0),
_CONFIGURE_MEMORY_FOR_TIMERS(CONFIGURE_MAXIMUM_TIMERS),
_CONFIGURE_MEMORY_FOR_SEMAPHORES(CONFIGURE_MAXIMUM_SEMAPHORES),
_CONFIGURE_MEMORY_FOR_MESSAGE_QUEUES(CONFIGURE_MAXIMUM_MESSAGE_QUEUES),
_CONFIGURE_MEMORY_FOR_PARTITIONS(CONFIGURE_MAXIMUM_PARTITIONS),
_CONFIGURE_MEMORY_FOR_REGIONS( CONFIGURE_MAXIMUM_REGIONS ),
_CONFIGURE_MEMORY_FOR_PORTS(CONFIGURE_MAXIMUM_PORTS),
_CONFIGURE_MEMORY_FOR_PERIODS(CONFIGURE_MAXIMUM_PERIODS),
_CONFIGURE_MEMORY_FOR_BARRIERS(_CONFIGURE_BARRIERS),
_CONFIGURE_MEMORY_FOR_USER_EXTENSIONS(CONFIGURE_MAXIMUM_USER_EXTENSIONS),
_CONFIGURE_MEMORY_FOR_POSIX_KEYS( _CONFIGURE_POSIX_KEYS, \
CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS ),
/* POSIX API Pieces */
#ifdef RTEMS_POSIX_API
_CONFIGURE_MEMORY_FOR_POSIX_TIMERS( CONFIGURE_MAXIMUM_POSIX_TIMERS ),
_CONFIGURE_MEMORY_FOR_POSIX_QUEUED_SIGNALS(
CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS ),
#endif
_CONFIGURE_MEMORY_FOR_POSIX_MESSAGE_QUEUES(
CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUES ),
_CONFIGURE_MEMORY_FOR_POSIX_SEMAPHORES( CONFIGURE_MAXIMUM_POSIX_SEMAPHORES ),
_CONFIGURE_MEMORY_FOR_POSIX_SHMS( CONFIGURE_MAXIMUM_POSIX_SHMS ),
/* Stack space sizes */
_CONFIGURE_IDLE_TASKS_STACK,
_CONFIGURE_INITIALIZATION_THREADS_EXTRA_STACKS,
_CONFIGURE_TASKS_STACK,
_CONFIGURE_POSIX_THREADS_STACK,
_CONFIGURE_GOROUTINES_STACK,
_CONFIGURE_ADA_TASKS_STACK,
CONFIGURE_EXTRA_MPCI_RECEIVE_SERVER_STACK,
CONFIGURE_EXTRA_TASK_STACKS
};
#endif
/*
* Make sure a task/thread of some sort is configured.
*
* When analyzing RTEMS to find the smallest possible of memory
* that must be allocated, you probably do want to configure 0
* tasks/threads so there is a smaller set of calls to _Workspace_Allocate
* to analyze.
*/
#if !defined(CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION)
#if (CONFIGURE_MAXIMUM_TASKS == 0) && \
(CONFIGURE_MAXIMUM_POSIX_THREADS == 0) && \
(CONFIGURE_MAXIMUM_ADA_TASKS == 0) && \
(CONFIGURE_MAXIMUM_GOROUTINES == 0)
#error "CONFIGURATION ERROR: No tasks or threads configured!!"
#endif
#endif
#ifndef RTEMS_SCHEDSIM
/*
* Make sure at least one of the initialization task/thread
* tables was defined.
*/
#if !defined(CONFIGURE_RTEMS_INIT_TASKS_TABLE) && \
!defined(CONFIGURE_POSIX_INIT_THREAD_TABLE) && \
!defined(CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION)
#error "CONFIGURATION ERROR: No initialization tasks or threads configured!!"
#endif
#endif
/*
* If the user is trying to configure a multiprocessing application and
* RTEMS was not configured and built multiprocessing, then error out.
*/
#if defined(CONFIGURE_MP_APPLICATION) && \
!defined(RTEMS_MULTIPROCESSING)
#error "CONFIGURATION ERROR: RTEMS not configured for multiprocessing!!"
#endif
/*
* If an attempt was made to configure POSIX objects and
* the POSIX API was not configured into RTEMS, error out.
*
* @note POSIX Keys are always available so the parameters
* CONFIGURE_MAXIMUM_POSIX_KEYS and
* CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS are not in this list.
*/
#if !defined(RTEMS_POSIX_API)
#if ((CONFIGURE_MAXIMUM_POSIX_TIMERS != 0) || \
(CONFIGURE_MAXIMUM_POSIX_QUEUED_SIGNALS != 0))
#error "CONFIGURATION ERROR: POSIX API support not configured!!"
#endif
#endif
#if !defined(RTEMS_SCHEDSIM)
#if !defined(CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE)
/*
* You must either explicity include or exclude the clock driver.
* It is such a common newbie error to leave it out. Maybe this
* will put an end to it.
*
* NOTE: If you are using the timer driver, it is considered
* mutually exclusive with the clock driver because the
* drivers are assumed to use the same "timer" hardware
* on many boards.
*/
#if !defined(CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER) && \
!defined(CONFIGURE_APPLICATION_DOES_NOT_NEED_CLOCK_DRIVER) && \
!defined(CONFIGURE_APPLICATION_NEEDS_TIMER_DRIVER)
#error "CONFIGURATION ERROR: Do you want the clock driver or not?!?"
#endif
/*
* Only one of the following three configuration parameters should be
* defined at a time.
*/
#if ((defined(CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER) + \
defined(CONFIGURE_APPLICATION_NEEDS_TIMER_DRIVER) + \
defined(CONFIGURE_APPLICATION_DOES_NOT_NEED_CLOCK_DRIVER)) > 1)
#error "CONFIGURATION ERROR: More than one clock/timer driver configuration parameter specified?!?"
#endif
#endif /* !defined(CONFIGURE_HAS_OWN_DEVICE_DRIVER_TABLE) */
#endif /* !defined(RTEMS_SCHEDSIM) */
/*
* These names have been obsoleted so make the user application stop compiling
*/
#if defined(CONFIGURE_TEST_NEEDS_TIMER_DRIVER) || \
defined(CONFIGURE_TEST_NEEDS_CONSOLE_DRIVER) || \
defined(CONFIGURE_TEST_NEEDS_CLOCK_DRIVER) || \
defined(CONFIGURE_TEST_NEEDS_RTC_DRIVER) || \
defined(CONFIGURE_TEST_NEEDS_STUB_DRIVER)
#error "CONFIGURATION ERROR: CONFIGURE_TEST_XXX constants are obsolete"
#endif
/*
* Validate the configured maximum priority
*/
#if ((CONFIGURE_MAXIMUM_PRIORITY != 3) && \
(CONFIGURE_MAXIMUM_PRIORITY != 7) && \
(CONFIGURE_MAXIMUM_PRIORITY != 15) && \
(CONFIGURE_MAXIMUM_PRIORITY != 31) && \
(CONFIGURE_MAXIMUM_PRIORITY != 63) && \
(CONFIGURE_MAXIMUM_PRIORITY != 127) && \
(CONFIGURE_MAXIMUM_PRIORITY != 255))
#error "Maximum priority is not 1 less than a power of 2 between 4 and 256"
#endif
#if (CONFIGURE_MAXIMUM_PRIORITY > PRIORITY_DEFAULT_MAXIMUM)
#error "Maximum priority configured higher than supported by target."
#endif
#ifdef CONFIGURE_HAS_OWN_CONFIGURATION_TABLE
#warning "The CONFIGURE_HAS_OWN_CONFIGURATION_TABLE configuration option is obsolete since RTEMS 5.1"
#endif
#ifdef CONFIGURE_HAS_OWN_FILESYSTEM_TABLE
#warning "The CONFIGURE_HAS_OWN_FILESYSTEM_TABLE configuration option is obsolete since RTEMS 5.1"
#endif
#ifdef CONFIGURE_HAS_OWN_MOUNT_TABLE
#warning "The CONFIGURE_HAS_OWN_MOUNT_TABLE configuration option is obsolete since RTEMS 5.1"
#endif
#ifdef CONFIGURE_NUMBER_OF_TERMIOS_PORTS
#warning "The CONFIGURE_NUMBER_OF_TERMIOS_PORTS configuration option is obsolete since RTEMS 5.1"
#endif
#ifdef CONFIGURE_MAXIMUM_POSIX_BARRIERS
#warning "The CONFIGURE_MAXIMUM_POSIX_BARRIERS configuration option is obsolete since RTEMS 5.1"
#endif
#ifdef CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES
#warning "The CONFIGURE_MAXIMUM_POSIX_CONDITION_VARIABLES configuration option is obsolete since RTEMS 5.1"
#endif
#ifdef CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS
#warning "The CONFIGURE_MAXIMUM_POSIX_MESSAGE_QUEUE_DESCRIPTORS configuration option is obsolete since RTEMS 5.1"
#endif
#ifdef CONFIGURE_MAXIMUM_POSIX_MUTEXES
#warning "The CONFIGURE_MAXIMUM_POSIX_MUTEXES configuration option is obsolete since RTEMS 5.1"
#endif
#ifdef CONFIGURE_MAXIMUM_POSIX_RWLOCKS
#warning "The CONFIGURE_MAXIMUM_POSIX_RWLOCKS configuration option is obsolete since RTEMS 5.1"
#endif
#ifdef CONFIGURE_MAXIMUM_POSIX_SPINLOCKS
#warning "The CONFIGURE_MAXIMUM_POSIX_SPINLOCKS configuration option is obsolete since RTEMS 5.1"
#endif
#ifdef CONFIGURE_MAXIMUM_PTYS
#warning "The CONFIGURE_MAXIMUM_PTYS configuration option is obsolete since RTEMS 5.1"
#endif
#ifdef CONFIGURE_TERMIOS_DISABLED
#warning "The CONFIGURE_TERMIOS_DISABLED configuration option is obsolete since RTEMS 5.1"
#endif
/*
* POSIX Key pair shouldn't be less than POSIX Key, which is highly
* likely to be error.
*/
#if (CONFIGURE_MAXIMUM_POSIX_KEYS != 0) && \
(CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS != 0)
#if (CONFIGURE_MAXIMUM_POSIX_KEY_VALUE_PAIRS < CONFIGURE_MAXIMUM_POSIX_KEYS)
#error "Fewer POSIX Key pairs than POSIX Key!"
#endif
#endif
/*
* IMFS block size for in memory files (memfiles) must be a power of
* two between 16 and 512 inclusive.
*/
#if ((CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK != 16) && \
(CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK != 32) && \
(CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK != 64) && \
(CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK != 128) && \
(CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK != 256) && \
(CONFIGURE_IMFS_MEMFILE_BYTES_PER_BLOCK != 512))
#error "IMFS Memfile block size must be a power of 2 between 16 and 512"
#endif
#endif
/* end of include file */