/*
* Copyright (c) 2004,2005 RTEMS/Mvme5500 port by S. Kate Feng <feng1@bnl.gov>
* under the Deaprtment of Energy contract DE-AC02-98CH10886
* Brookhaven National Laboratory, All rights reserved
*
* Acknowledgements:
* netBSD : Copyright (c) 2001, 2002, 2003, 2004 Wasabi Systems, Inc.
* Jason R. Thorpe for Wasabi Systems, Inc.
* Intel : NDA document
*
* Some notes from the author, S. Kate Feng :
*
* 1) The error reporting routine i82544EI_error() employs two pointers
* for the error report buffer. One for the ISR and another one for
* the error report.
* 2) Enable the hardware Auto-Negotiation state machine.
* 3) Set Big Endian mode in the WMREG_CTRL so that we do not need htole32
* because PPC is big endian mode.
* However, the data packet structure defined in if_wmreg.h
* should be redefined for the big endian mode.
* 4) To ensure the cache coherence, the MOTLoad had the PCI
* snoop control registers (0x1f00) set to "snoop to WB region" for
* the entire 512MB of memory.
* 5) MOTLoad default :
* little endian mode, cache line size is 32 bytes, no checksum control,
* hardware auto-neg. state machine disabled. PCI control "snoop
* to WB region", MII mode (PHY) instead of TBI mode.
* 6) We currently only use 32-bit (instead of 64-bit) DMA addressing.
* 7) Implementation for Jumbo Frame and TCP checksum is not completed yet.
*
*/
#define __INSIDE_RTEMS_BSD_TCPIP_STACK__
#define BYTE_ORDER BIG_ENDIAN
#include <rtems.h>
#include <rtems/bspIo.h> /* printk */
#include <rtems/error.h>
#include <rtems/rtems_bsdnet.h>
#include <rtems/rtems_bsdnet_internal.h>
#include <inttypes.h>
#include <stdio.h> /* printf for statistics */
#include <string.h>
#include <libcpu/io.h> /* inp & friends */
#include <libcpu/spr.h> /* registers.h is included here */
#include <bsp.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <errno.h>
/* #include <sys/queue.h> */
#include <sys/socket.h>
#include <sys/sockio.h> /* SIOCADDMULTI, SIOC... */
#include <net/if.h>
#include <net/if_dl.h>
#include <netinet/in.h>
#include <netinet/if_ether.h>
#include <net/ethernet.h>
#ifdef INET
#include <netinet/in_var.h>
#endif
#include <bsp/irq.h>
#include <bsp/pci.h>
#include <bsp/pcireg.h>
#include <bsp/if_wmreg.h>
extern int pci_mem_find(int b, int d, int f, int reg, unsigned *basep,unsigned *sizep);
#define WMREG_RADV 0x282c /* Receive Interrupt Absolute Delay Timer */
#define ETHERTYPE_FLOWCONTROL 0x8808 /* 802.3x flow control packet */
#define i82544EI_TASK_NAME "IGHz"
#define SOFTC_ALIGN 4095
#define IF_ERR_BUFSZE 16
/*#define WM_DEBUG*/
#ifdef WM_DEBUG
#define WM_DEBUG_LINK 0x01
#define WM_DEBUG_TX 0x02
#define WM_DEBUG_RX 0x04
#define WM_DEBUG_GMII 0x08
static int wm_debug = WM_DEBUG_TX|WM_DEBUG_RX|WM_DEBUG_LINK; /* May 7, 2009 */
#define DPRINTF(x, y) if (wm_debug & (x)) printk y
#else
#define DPRINTF(x, y) /* nothing */
#endif /* WM_DEBUG */
/* RTEMS event to kill the daemon */
#define KILL_EVENT RTEMS_EVENT_1
/* RTEMS event to (re)start the transmitter */
#define START_TRANSMIT_EVENT RTEMS_EVENT_2
/* RTEMS events used by the ISR */
#define RX_EVENT RTEMS_EVENT_3
#define TX_EVENT RTEMS_EVENT_4
#define ERR_EVENT RTEMS_EVENT_5
#define INIT_EVENT RTEMS_EVENT_6
#define ALL_EVENTS (KILL_EVENT|START_TRANSMIT_EVENT|RX_EVENT|TX_EVENT|ERR_EVENT|INIT_EVENT)
/* <skf> used 64 in 4.8.0, TOD; try 4096 */
#define NTXDESC 256
#define NTXDESC_MASK (NTXDESC - 1)
#define WM_NEXTTX(x) (((x) + 1) & NTXDESC_MASK)
#define NRXDESC 256
#define NRXDESC_MASK (NRXDESC - 1)
#define WM_NEXTRX(x) (((x) + 1) & NRXDESC_MASK)
#define WM_PREVRX(x) (((x) - 1) & NRXDESC_MASK)
#define WM_CDOFF(x) offsetof(struct wm_control_data, x)
#define WM_CDTXOFF(x) WM_CDOFF(sc_txdescs[(x)])
#define WM_CDRXOFF(x) WM_CDOFF(sc_rxdescs[(x)])
#define TXQ_HiLmt_OFF 32
static uint32_t TxDescCmd;
static unsigned BSP_1GHz_membase;
/*
* Software state per device.
*/
struct wm_softc {
wiseman_txdesc_t sc_txdescs[NTXDESC]; /* transmit descriptor memory */
wiseman_rxdesc_t sc_rxdescs[NRXDESC]; /* receive descriptor memory */
struct mbuf *txs_mbuf[NTXDESC]; /* transmit buffer memory */
struct mbuf *rxs_mbuf[NRXDESC]; /* receive buffer memory */
struct wm_softc *next_module;
volatile unsigned int if_errsts[IF_ERR_BUFSZE]; /* intr_status */
unsigned int if_err_ptr1; /* ptr used in i82544EI_error() */
unsigned int if_err_ptr2; /* ptr used in ISR */
int txs_firstdesc; /* first descriptor in packet */
int txs_lastdesc; /* last descriptor in packet */
int txs_ndesc; /* # of descriptors used */
unsigned sc_membase; /* Memory space base address */
unsigned sc_memsize; /* Memory space size */
char dv_xname[16]; /* external name (name + unit) */
void *sc_sdhook; /* shutdown hook */
struct arpcom arpcom; /* rtems if structure, contains ifnet */
int sc_flags; /* flags; see below */
int sc_bus_speed; /* PCI/PCIX bus speed */
int sc_flowflags; /* 802.3x flow control flags */
void *sc_ih; /* interrupt cookie */
int sc_ee_addrbits; /* EEPROM address bits */
rtems_id daemonTid;
rtems_id daemonSync; /* synchronization with the daemon */
int txq_next; /* next Tx descriptor ready for transmitting */
uint32_t txq_nactive; /* number of active TX descriptors */
uint32_t txq_fi; /* next free Tx descriptor */
uint32_t txq_free; /* number of free Tx jobs */
uint32_t sc_txctx_ipcs; /* cached Tx IP cksum ctx */
uint32_t sc_txctx_tucs; /* cached Tx TCP/UDP cksum ctx */
int sc_rxptr; /* next ready Rx descriptor/queue ent */
int sc_rxdiscard;
int sc_rxlen;
uint32_t sc_ctrl; /* prototype CTRL register */
uint32_t sc_ctrl_ext; /* prototype CTRL_EXT register */
uint32_t sc_icr; /* prototype interrupt bits */
uint32_t sc_tctl; /* prototype TCTL register */
uint32_t sc_rctl; /* prototype RCTL register */
uint32_t sc_tipg; /* prototype TIPG register */
uint32_t sc_fcrtl; /* prototype FCRTL register */
uint32_t sc_pba; /* prototype PBA register */
int sc_mchash_type; /* multicast filter offset */
/* statistics */
struct {
volatile unsigned long rxInterrupts;
volatile unsigned long txInterrupts;
unsigned long linkInterrupts;
unsigned long length_errors;
unsigned long frame_errors;
unsigned long crc_errors;
unsigned long rxOvrRunInterrupts; /* Rx overrun interrupt */
unsigned long rxSeqErr;
unsigned long rxC_ordered;
unsigned long ghostInterrupts;
unsigned long linkStatusChng;
} stats;
};
/* <skf> our memory address seen from the PCI bus should be 1:1 */
#define htole32(x) le32toh(x)
#define le32toh(x) CPU_swap_u32((unsigned int) x)
#define le16toh(x) CPU_swap_u16(x)
/* sc_flags */
#define WM_F_HAS_MII 0x01 /* has MII */
/* 82544 EI does not perform EEPROM handshake, EEPROM interface is not SPI */
#define WM_F_EEPROM_HANDSHAKE 0x02 /* requires EEPROM handshake */
#define WM_F_EEPROM_SPI 0x04 /* EEPROM is SPI */
#define WM_F_IOH_VALID 0x10 /* I/O handle is valid */
#define WM_F_BUS64 0x20 /* bus is 64-bit */
#define WM_F_PCIX 0x40 /* bus is PCI-X */
#define CSR_READ(sc,reg) in_le32((volatile uint32_t *)(sc->sc_membase+reg))
#define CSR_WRITE(sc,reg,val) out_le32((volatile uint32_t *)(sc->sc_membase+reg), val)
#define WM_CDTXADDR(sc) ( (uint32_t) &sc->sc_txdescs[0] )
#define WM_CDRXADDR(sc) ( (uint32_t) &sc->sc_rxdescs[0] )
static struct wm_softc *root_i82544EI_dev = NULL;
static void i82544EI_ifstart(struct ifnet *ifp);
static int wm_ioctl(struct ifnet *ifp, ioctl_command_t cmd,caddr_t data);
static void i82544EI_ifinit(void *arg);
static void wm_stop(struct ifnet *ifp, int disable);
static void wm_gmii_mediainit(struct wm_softc *sc);
static void wm_rxdrain(struct wm_softc *sc);
static int wm_add_rxbuf(struct wm_softc *sc, int idx);
static int wm_read_eeprom(struct wm_softc *sc,int word,int wordcnt, uint16_t *data);
static void i82544EI_daemon(void *arg);
static void wm_set_filter(struct wm_softc *sc);
static void i82544EI_rx(struct wm_softc *sc);
static void i82544EI_isr(rtems_irq_hdl_param handle);
static void i82544EI_sendpacket(struct wm_softc *sc, struct mbuf *m);
static void i82544EI_irq_on(const rtems_irq_connect_data *irq)
{
struct wm_softc *sc;
unsigned int irqMask= ICR_TXDW | ICR_LSC | ICR_RXSEQ | ICR_RXDMT0 | ICR_RXO | ICR_RXT0 | ICR_RXCFG;
for (sc= root_i82544EI_dev; sc; sc= sc-> next_module) {
CSR_WRITE(sc,WMREG_IMS,(CSR_READ(sc,WMREG_IMS)| irqMask) );
return;
}
}
static void i82544EI_irq_off(const rtems_irq_connect_data *irq)
{
struct wm_softc *sc;
unsigned int irqMask= ICR_TXDW | ICR_LSC | ICR_RXSEQ | ICR_RXDMT0 | ICR_RXO | ICR_RXT0 |ICR_RXCFG ;
for (sc= root_i82544EI_dev; sc; sc= sc-> next_module) {
CSR_WRITE(sc,WMREG_IMS, (CSR_READ(sc,WMREG_IMS) & ~irqMask) );
return;
}
}
static int i82544EI_irq_is_on(const rtems_irq_connect_data *irq)
{
return(CSR_READ(root_i82544EI_dev,WMREG_ICR) & root_i82544EI_dev->sc_icr);
}
static rtems_irq_connect_data i82544IrqData={
BSP_GPP_82544_IRQ,
(rtems_irq_hdl) i82544EI_isr,
(rtems_irq_hdl_param) NULL,
(rtems_irq_enable) i82544EI_irq_on,
(rtems_irq_disable) i82544EI_irq_off,
(rtems_irq_is_enabled) i82544EI_irq_is_on,
};
int rtems_i82544EI_driver_attach(struct rtems_bsdnet_ifconfig *config, int attach)
{
struct wm_softc *sc;
struct ifnet *ifp;
uint8_t enaddr[ETHER_ADDR_LEN];
uint16_t myea[ETHER_ADDR_LEN / 2], cfg1, cfg2, swdpin;
unsigned reg;
int b,d,f; /* PCI bus/device/function */
int unit;
void *softc_mem;
char *name;
unit = rtems_bsdnet_parse_driver_name(config, &name);
if (unit < 0) return 0;
if ( !strncmp((const char *)name,"autoz",5))
memcpy(name,"gtGHz",5);
printk("\nAttaching MVME5500 1GHz NIC%d\n", unit);
printk("RTEMS-mvme5500 BSP Copyright (c) 2004,2005,2008, Brookhaven National Lab., Shuchen Kate Feng \n");
/* Make sure certain elements e.g. descriptor lists are aligned.*/
softc_mem = rtems_bsdnet_malloc(sizeof(*sc) + SOFTC_ALIGN, M_FREE, M_NOWAIT);
/* Check for the very unlikely case of no memory. */
if (softc_mem == NULL)
rtems_panic("i82544EI: OUT OF MEMORY");
sc = (void *)(((long)softc_mem + SOFTC_ALIGN) & ~SOFTC_ALIGN);
memset(sc, 0, sizeof(*sc));
sprintf(sc->dv_xname, "%s%d", name, unit);
if (pci_find_device(PCI_VENDOR_ID_INTEL,PCI_DEVICE_ID_INTEL_82544EI_COPPER,
unit-1,&b, &d, &f))
rtems_panic("i82544EI device ID not found\n");
#ifdef WM_DEBUG
printk("82544EI:b%d, d%d, f%d\n", b, d,f);
#endif
/* Memory-mapped acccess is required for normal operation.*/
if ( pci_mem_find(b,d,f,PCI_MAPREG_START, &sc->sc_membase, &sc->sc_memsize))
rtems_panic("i82544EI: unable to map memory space\n");
#ifdef WM_DEBUG
printk("Memory base addr 0x%x\n", sc->sc_membase);
#endif
BSP_1GHz_membase= sc->sc_membase;
#ifdef WM_DEBUG
printk("Memory base addr 0x%x\n", sc->sc_membase);
printk("txdesc[0] addr:0x%x, rxdesc[0] addr:0x%x, sizeof sc %d\n",&sc->sc_txdescs[0], &sc->sc_rxdescs[0], sizeof(*sc));
#endif
sc->sc_ctrl=CSR_READ(sc,WMREG_CTRL);
/*
* Determine a few things about the bus we're connected to.
*/
reg = CSR_READ(sc,WMREG_STATUS);
if (reg & STATUS_BUS64) sc->sc_flags |= WM_F_BUS64;
sc->sc_bus_speed = (reg & STATUS_PCI66) ? 66 : 33;
#ifdef WM_DEBUG
printk("%s%d: %d-bit %dMHz PCI bus\n",name, unit,
(sc->sc_flags & WM_F_BUS64) ? 64 : 32, sc->sc_bus_speed);
#endif
/*
* Setup some information about the EEPROM.
*/
sc->sc_ee_addrbits = 6;
#ifdef WM_DEBUG
printk("%s%d: %u word (%d address bits) MicroWire EEPROM\n",
name, unit, 1U << sc->sc_ee_addrbits,
sc->sc_ee_addrbits);
#endif
/*
* Read the Ethernet address from the EEPROM.
*/
if (wm_read_eeprom(sc, EEPROM_OFF_MACADDR,
sizeof(myea) / sizeof(myea[0]), myea))
rtems_panic("i82544ei 1GHZ ethernet: unable to read Ethernet address");
enaddr[0] = myea[0] & 0xff;
enaddr[1] = myea[0] >> 8;
enaddr[2] = myea[1] & 0xff;
enaddr[3] = myea[1] >> 8;
enaddr[4] = myea[2] & 0xff;
enaddr[5] = myea[2] >> 8;
memcpy(sc->arpcom.ac_enaddr, enaddr, ETHER_ADDR_LEN);
#ifdef WM_DEBUG
printk("%s: Ethernet address %s\n", sc->dv_xname,
ether_sprintf(enaddr));
#endif
/*
* Read the config info from the EEPROM, and set up various
* bits in the control registers based on their contents.
*/
if (wm_read_eeprom(sc, EEPROM_OFF_CFG1, 1, &cfg1)) {
printk("%s: unable to read CFG1 from EEPROM\n",sc->dv_xname);
return(0);
}
if (wm_read_eeprom(sc, EEPROM_OFF_CFG2, 1, &cfg2)) {
printk("%s: unable to read CFG2 from EEPROM\n",sc->dv_xname);
return(0);
}
if (wm_read_eeprom(sc, EEPROM_OFF_SWDPIN, 1, &swdpin)) {
printk("%s: unable to read SWDPIN from EEPROM\n",sc->dv_xname);
return(0);
}
if (cfg1 & EEPROM_CFG1_ILOS) sc->sc_ctrl |= CTRL_ILOS;
sc->sc_ctrl|=((swdpin >> EEPROM_SWDPIN_SWDPIO_SHIFT) & 0xf) <<
CTRL_SWDPIO_SHIFT;
sc->sc_ctrl |= ((swdpin >> EEPROM_SWDPIN_SWDPIN_SHIFT) & 0xf) <<
CTRL_SWDPINS_SHIFT;
CSR_WRITE(sc,WMREG_CTRL, sc->sc_ctrl);
#if 0
CSR_WRITE(sc,WMREG_CTRL_EXT, sc->sc_ctrl_ext);
#endif
/*
* Determine if we're TBI or GMII mode, and initialize the
* media structures accordingly.
*/
if ((CSR_READ(sc, WMREG_STATUS) & STATUS_TBIMODE) != 0) {
/* 1000BASE-X : fiber (TBI mode)
wm_tbi_mediainit(sc); */
} else { /* 1000BASE-T : copper (internal PHY mode), for the mvme5500 */
wm_gmii_mediainit(sc);
}
ifp = &sc->arpcom.ac_if;
/* set this interface's name and unit */
ifp->if_unit = unit;
ifp->if_name = name;
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
#ifdef RTEMS_ETHERMTU_JUMBO
sc->arpcom.ec_capabilities |= ETHERCAP_JUMBO_MTU;
ifp->if_mtu = config->mtu ? config->mtu : ETHERMTU_JUMBO;
#else
ifp->if_mtu = config->mtu ? config->mtu : ETHERMTU;
#endif
#ifdef RTEMS_CKSUM_OFFLOAD
/* < skf> The following is really not related to jumbo frame
sc->arpcom.ec_capabilities |= ETHERCAP_VLAN_MTU;*/
ifp->if_capabilities |= IFCAP_CSUM_IPv4_Tx | IFCAP_CSUM_IPv4_Rx |
IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_TCPv4_Rx |
IFCAP_CSUM_UDPv4_Tx | IFCAP_CSUM_UDPv4_Rx |
IFCAP_CSUM_TCPv6_Tx | IFCAP_CSUM_UDPv6_Tx |
IFCAP_TSOv4; /* TCP segmentation offload. */
#endif
ifp->if_ioctl = wm_ioctl;
ifp->if_start = i82544EI_ifstart;
/* ifp->if_watchdog = wm_watchdog;*/
ifp->if_init = i82544EI_ifinit;
if (ifp->if_snd.ifq_maxlen == 0)
ifp->if_snd.ifq_maxlen = ifqmaxlen;
ifp->if_output = ether_output;
/* create the synchronization semaphore */
if (RTEMS_SUCCESSFUL != rtems_semaphore_create(
rtems_build_name('I','G','H','Z'),0,0,0,&sc->daemonSync))
rtems_panic("i82544EI: semaphore creation failed");
i82544IrqData.handle= (rtems_irq_hdl_param) sc;
/* sc->next_module = root_i82544EI_dev;*/
root_i82544EI_dev = sc;
/* Attach the interface. */
if_attach(ifp);
ether_ifattach(ifp);
#ifdef WM_DEBUG
printk("82544EI: Ethernet driver has been attached (handle 0x%08x,ifp 0x%08x)\n",sc, ifp);
#endif
return(1);
}
/*
* wm_reset:
*
* Reset the i82544 chip.
*/
static void wm_reset(struct wm_softc *sc)
{
int i;
/* Packet Buffer Allocation (PBA)
* Writing PBA sets the receive portion of the buffer.
* the remainder is used for the transmit buffer.
*
* 82544 has a Packet Buffer of 64K.
* Default allocation : PBA=40K for Rx, leaving 24K for Tx.
* Default for jumbo: PBA=48K for Rx, leaving 16K for Tx.
*/
sc->sc_pba = sc->arpcom.ac_if.if_mtu > 8192 ? PBA_40K : PBA_48K;
CSR_WRITE(sc, WMREG_PBA, sc->sc_pba);
/* device reset */
CSR_WRITE(sc, WMREG_CTRL, CTRL_RST);
rtems_bsp_delay(10000);
for (i = 0; i < 1000; i++) {
if ((CSR_READ(sc, WMREG_CTRL) & CTRL_RST) == 0)
break;
rtems_bsp_delay(20);
}
if (CSR_READ(sc, WMREG_CTRL) & CTRL_RST)
printk("Intel 82544 1GHz reset failed to complete\n");
sc->sc_ctrl_ext = CSR_READ(sc,WMREG_CTRL_EXT);
sc->sc_ctrl_ext |= CTRL_EXT_EE_RST;
CSR_WRITE(sc, WMREG_CTRL_EXT, sc->sc_ctrl_ext);
CSR_READ(sc, WMREG_STATUS);
/* Wait for EEPROM reload */
rtems_bsp_delay(2000);
sc->sc_ctrl= CSR_READ(sc, WMREG_CTRL);
}
/*
* i82544EI_ifstart: [ifnet interface function]
*
* Start packet transmission on the interface.
*/
static void
i82544EI_ifstart(struct ifnet *ifp)
{
struct wm_softc *sc = ifp->if_softc;
#ifdef WM_DEBUG
printk("i82544EI_ifstart(");
#endif
if ((ifp->if_flags & IFF_RUNNING) == 0) {
#ifdef WM_DEBUG
printk("IFF_RUNNING==0\n");
#endif
return;
}
ifp->if_flags |= IFF_OACTIVE;
rtems_bsdnet_event_send (sc->daemonTid, START_TRANSMIT_EVENT);
#ifdef WM_DEBUG
printk(")\n");
#endif
}
static void i82544EI_stats(struct wm_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
printf(" Ghost Interrupts:%-8lu\n", sc->stats.ghostInterrupts);
printf(" Rx Interrupts:%-8lu\n", sc->stats.rxInterrupts);
printf(" Receive Packets:%-8u\n", (unsigned)CSR_READ(sc,WMREG_GPRC));
printf(" Receive Overrun:%-8lu\n", sc->stats.rxOvrRunInterrupts);
printf(" Receive errors:%-8u\n", (unsigned)CSR_READ(sc,WMREG_RXERRC));
printf(" Rx sequence error:%-8lu\n", sc->stats.rxSeqErr);
printf(" Rx /C/ ordered:%-8lu\n", sc->stats.rxC_ordered);
printf(" Rx Length Errors:%-8u\n", (unsigned)CSR_READ(sc,WMREG_RLEC));
printf(" Tx Interrupts:%-8lu\n", sc->stats.txInterrupts);
printf(" Transmitt Packets:%-8u\n", (unsigned)CSR_READ(sc,WMREG_GPTC));
printf(" Transmitt errors:%-8lu\n", ifp->if_oerrors);
printf(" Active Txqs:%-8lu\n", sc->txq_nactive);
printf(" collisions:%-8u\n", (unsigned)CSR_READ(sc,WMREG_COLC));
printf(" Crc Errors:%-8u\n", (unsigned)CSR_READ(sc,WMREG_CRCERRS));
printf(" Link Status Change:%-8lu\n", sc->stats.linkStatusChng);
}
/*
* wm_ioctl: [ifnet interface function]
*
* Handle control requests from the operator.
*/
static int wm_ioctl(struct ifnet *ifp, ioctl_command_t cmd,caddr_t data)
{
struct wm_softc *sc = ifp->if_softc;
int error=0;
switch (cmd) {
default:
error = ether_ioctl(ifp, cmd, data);
if (error == ENETRESET) {
/*
* Multicast list has changed; set the hardware filter
* accordingly.
*/
wm_set_filter(sc);
error = 0;
}
break;
case SIO_RTEMS_SHOW_STATS:
i82544EI_stats(sc);
break;
}
/* Try to get more packets going.*/
i82544EI_ifstart(ifp);
return (error);
}
/*
* wm_isr:
*
* Interrupt service routine.
*/
static void i82544EI_isr(rtems_irq_hdl_param handle)
{
volatile struct wm_softc *sc = (struct wm_softc *) handle;
uint32_t icr;
rtems_event_set events=0;
/* Reading the WMREG_ICR clears the interrupt bits */
icr = CSR_READ(sc,WMREG_ICR);
if ( icr & (ICR_RXDMT0|ICR_RXT0)) {
sc->stats.rxInterrupts++;
events |= RX_EVENT;
}
if (icr & ICR_TXDW) {
sc->stats.txInterrupts++;
events |= TX_EVENT;
}
/* <SKF> Rx overrun : no available receive buffer
* or PCI receive bandwidth inadequate.
*/
if (icr & ICR_RXO) {
sc->stats.rxOvrRunInterrupts++;
events |= INIT_EVENT;
}
if (icr & ICR_RXSEQ) /* framing error */ {
sc->if_errsts[sc->if_err_ptr2++]=icr;
if ( sc->if_err_ptr2 ==IF_ERR_BUFSZE) sc->if_err_ptr2=0;
events |= ERR_EVENT;
sc->stats.rxSeqErr++;
}
if ( !icr) sc->stats.ghostInterrupts++;
if (icr & ICR_LSC) sc->stats.linkStatusChng++;
if (icr & ICR_RXCFG) sc->stats.rxC_ordered++;
rtems_bsdnet_event_send(sc->daemonTid, events);
}
/*
* i82544EI_sendpacket:
*
* Helper; handle transmit interrupts.
*/
static void i82544EI_sendpacket(struct wm_softc *sc, struct mbuf *m)
{
#ifdef WM_DEBUG_TX
printk("sendpacket(");
#endif
if ( !(m->m_next)) { /* single buffer packet */
sc->txs_mbuf[sc->txq_next]= m;
/* Note: we currently only use 32-bit DMA addresses. */
sc->sc_txdescs[sc->txq_next].wtx_addr.wa_low = htole32(mtod(m, void*));
sc->sc_txdescs[sc->txq_next].wtx_cmdlen =htole32(TxDescCmd | m->m_len);
sc->txs_lastdesc= sc->txq_next;
sc->txq_next = WM_NEXTTX(sc->txq_next);
sc->txq_nactive++;
sc->txq_free--;
}
else /* multiple mbufs in this packet */
{
struct mbuf *mtp, *mdest;
volatile unsigned char *pt;
int len, y, loop=0;
#ifdef WM_DEBUG_TX
printk("multi mbufs ");
#endif
mtp = m;
while ( mtp) {
MGETHDR(mdest, M_WAIT, MT_DATA);
MCLGET(mdest, M_WAIT);
pt = (volatile unsigned char *)mdest->m_data;
for ( len=0;mtp;mtp=mtp->m_next) {
loop++;
/* Each descriptor gets a 2k (MCLBYTES) buffer, although
* the length of each descriptor can be up to 16288 bytes.
* For packets which fill more than one buffer ( >2k), we
* chain them together.
* <Kate Feng> : This effective for packets > 2K
* The other way is effective for packets < 2K
*/
if ( ((y=(len+mtp->m_len)) > sizeof(union mcluster))) {
printk(" >%d, use next descriptor\n", sizeof(union mcluster));
break;
}
memcpy((void *)pt,(char *)mtp->m_data, mtp->m_len);
pt += mtp->m_len;
len += mtp->m_len;
} /* end for loop */
mdest->m_len=len;
sc->txs_mbuf[sc->txq_next] = mdest;
/* Note: we currently only use 32-bit DMA addresses. */
sc->sc_txdescs[sc->txq_next].wtx_addr.wa_low = htole32(mtod(mdest, void*));
sc->sc_txdescs[sc->txq_next].wtx_cmdlen = htole32(TxDescCmd|mdest->m_len);
sc->txs_lastdesc = sc->txq_next;
sc->txq_next = WM_NEXTTX(sc->txq_next);
sc->txq_nactive ++;
if (sc->txq_free)
sc->txq_free--;
else
rtems_panic("i8254EI : no more free descriptors");
} /* end for while */
/* free old mbuf chain */
m_freem(m);
m=0;
} /* end multiple mbufs */
DPRINTF(WM_DEBUG_TX,("%s: TX: desc %d: cmdlen 0x%08x\n", sc->dv_xname,
sc->txs_lastdesc, le32toh(sc->sc_txdescs[sc->txs_lastdesc].wtx_cmdlen)));
DPRINTF(WM_DEBUG_TX,("status 0x%08x\n",sc->sc_txdescs[sc->txq_fi].wtx_fields.wtxu_status));
memBar();
/* This is the location where software writes the first NEW descriptor */
CSR_WRITE(sc,WMREG_TDT, sc->txq_next);
DPRINTF(WM_DEBUG_TX,("%s: addr 0x%08x, TX: TDH %d, TDT %d\n",sc->dv_xname,
le32toh(sc->sc_txdescs[sc->txs_lastdesc].wtx_addr.wa_low), CSR_READ(sc,WMREG_TDH),
CSR_READ(sc,WMREG_TDT)));
DPRINTF(WM_DEBUG_TX,("%s: TX: finished transmitting packet, job %d\n",
sc->dv_xname, sc->txq_next));
}
static void i82544EI_txq_free(struct wm_softc *sc, uint8_t status)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
/* We might use the statistics registers instead of variables
* to keep tack of the network statistics
*/
/* statistics */
ifp->if_opackets++;
if (status & (WTX_ST_EC|WTX_ST_LC)) {
ifp->if_oerrors++;
if (status & WTX_ST_LC)
printf("%s: late collision\n", sc->dv_xname);
else if (status & WTX_ST_EC) {
ifp->if_collisions += 16;
printf("%s: excessive collisions\n", sc->dv_xname);
}
}
/* Free the original mbuf chain */
m_freem(sc->txs_mbuf[sc->txq_fi]);
sc->txs_mbuf[sc->txq_fi] = 0;
sc->sc_txdescs[sc->txq_fi].wtx_fields.wtxu_status=0;
sc->txq_free ++;
sc->txq_fi = WM_NEXTTX(sc->txq_fi);
--sc->txq_nactive;
}
static void i82544EI_txq_done(struct wm_softc *sc)
{
uint8_t status;
/*
* Go through the Tx list and free mbufs for those
* frames which have been transmitted.
*/
while ( sc->txq_nactive > 0) {
status = sc->sc_txdescs[sc->txq_fi].wtx_fields.wtxu_status;
if ((status & WTX_ST_DD) == 0) break;
i82544EI_txq_free(sc, status);
DPRINTF(WM_DEBUG_TX,("%s: TX: job %d done\n",
sc->dv_xname, sc->txq_fi));
}
}
static void wm_init_rxdesc(struct wm_softc *sc, int x)
{
wiseman_rxdesc_t *__rxd = &(sc)->sc_rxdescs[(x)];
struct mbuf *m;
m = sc->rxs_mbuf[x];
__rxd->wrx_addr.wa_low=htole32(mtod(m, void*));
__rxd->wrx_addr.wa_high = 0;
__rxd->wrx_len = 0;
__rxd->wrx_cksum = 0;
__rxd->wrx_status = 0;
__rxd->wrx_errors = 0;
__rxd->wrx_special = 0;
/* Receive Descriptor Tail: add Rx desc. to H/W free list */
CSR_WRITE(sc,WMREG_RDT, (x));
}
static void i82544EI_rx(struct wm_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mbuf *m;
int i, len;
uint8_t status, errors;
struct ether_header *eh;
#ifdef WM_DEBUG
printk("i82544EI_rx()\n");
#endif
for (i = sc->sc_rxptr;; i = WM_NEXTRX(i)) {
DPRINTF(WM_DEBUG_RX, ("%s: RX: checking descriptor %d\n",
sc->dv_xname, i));
status = sc->sc_rxdescs[i].wrx_status;
if ((status & WRX_ST_DD) == 0) break; /* descriptor not done */
errors = sc->sc_rxdescs[i].wrx_errors;
len = le16toh(sc->sc_rxdescs[i].wrx_len);
m = sc->rxs_mbuf[i];
if (sc->sc_rxdiscard) {
printk("RX: discarding contents of descriptor %d\n", i);
wm_init_rxdesc(sc, i);
if (status & WRX_ST_EOP) {
/* Reset our state. */
printk("RX: resetting rxdiscard -> 0\n");
sc->sc_rxdiscard = 0;
}
continue;
}
/*
* If an error occurred, update stats and drop the packet.
*/
if (errors &(WRX_ER_CE|WRX_ER_SE|WRX_ER_SEQ|WRX_ER_CXE|WRX_ER_RXE)) {
ifp->if_ierrors++;
if (errors & WRX_ER_SE)
printk("%s: symbol error\n",sc->dv_xname);
else if (errors & WRX_ER_SEQ)
printk("%s: receive sequence error\n",sc->dv_xname);
else if (errors & WRX_ER_CE)
printk("%s: CRC error\n",sc->dv_xname);
m_freem(m);
goto give_it_back;
}
/*
* No errors. Receive the packet.
*
* Note, we have configured the chip to include the
* CRC with every packet.
*/
m->m_len = m->m_pkthdr.len = len - sizeof(struct ether_header);
DPRINTF(WM_DEBUG_RX,("%s: RX: buffer at %p len %d\n",
sc->dv_xname, m->m_data, len));
eh = mtod (m, struct ether_header *);
m->m_data += sizeof(struct ether_header);
ether_input (ifp, eh, m);
/* Pass it on. */
ifp->if_ipackets++;
give_it_back:
/* Add a new receive buffer to the ring.*/
if (wm_add_rxbuf(sc, i) != 0) {
/*
* Failed, throw away what we've done so
* far, and discard the rest of the packet.
*/
printk("Failed in wm_add_rxbuf(), drop packet\n");
ifp->if_ierrors++;
wm_init_rxdesc(sc, i);
if ((status & WRX_ST_EOP) == 0)
sc->sc_rxdiscard = 1;
m_freem(m);
}
} /* end for */
/* Update the receive pointer. */
sc->sc_rxptr = i;
DPRINTF(WM_DEBUG_RX, ("%s: RX: rxptr -> %d\n", sc->dv_xname, i));
}
static int i82544EI_init_hw(struct wm_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
int i,error;
uint8_t cksumfields;
#if 0
/* KATETODO : sc_align_tweak */
/*
* *_HDR_ALIGNED_P is constant 1 if __NO_STRICT_ALIGMENT is set.
* There is a small but measurable benefit to avoiding the adjusment
* of the descriptor so that the headers are aligned, for normal mtu,
* on such platforms. One possibility is that the DMA itself is
* slightly more efficient if the front of the entire packet (instead
* of the front of the headers) is aligned.
*
* Note we must always set align_tweak to 0 if we are using
* jumbo frames.
*/
#ifdef __NO_STRICT_ALIGNMENT
sc->sc_align_tweak = 0;
#else
if ((ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN) > (MCLBYTES - 2))
sc->sc_align_tweak = 0;
else
sc->sc_align_tweak = 2;
#endif /* __NO_STRICT_ALIGNMENT */
#endif
/* Cancel any pending I/O. */
wm_stop(ifp, 0);
/* update statistics before reset */
ifp->if_collisions += CSR_READ(sc, WMREG_COLC);
ifp->if_ierrors += CSR_READ(sc, WMREG_RXERRC);
/* Reset the chip to a known state. */
wm_reset(sc);
/* Initialize the error buffer ring */
sc->if_err_ptr1=0;
sc->if_err_ptr2=0;
for (i=0; i< IF_ERR_BUFSZE; i++) sc->if_errsts[i]=0;
/* Initialize the transmit descriptor ring. */
memset( (void *) sc->sc_txdescs, 0, sizeof(sc->sc_txdescs));
sc->txq_free = NTXDESC;
sc->txq_next = 0;
sc->txs_lastdesc = 0;
sc->txq_next = 0;
sc->txq_free = NTXDESC;
sc->txq_nactive = 0;
sc->sc_txctx_ipcs = 0xffffffff;
sc->sc_txctx_tucs = 0xffffffff;
CSR_WRITE(sc,WMREG_TBDAH, 0);
CSR_WRITE(sc,WMREG_TBDAL, WM_CDTXADDR(sc));
#ifdef WM_DEBUG
printk("TBDAL 0x%x, TDLEN %d\n", WM_CDTXADDR(sc), sizeof(sc->sc_txdescs));
#endif
CSR_WRITE(sc,WMREG_TDLEN, sizeof(sc->sc_txdescs));
CSR_WRITE(sc,WMREG_TDH, 0);
CSR_WRITE(sc,WMREG_TDT, 0);
CSR_WRITE(sc,WMREG_TIDV, 0 );
/* CSR_WRITE(sc,WMREG_TADV, 128); not for 82544 */
CSR_WRITE(sc,WMREG_TXDCTL, TXDCTL_PTHRESH(0) |
TXDCTL_HTHRESH(0) | TXDCTL_WTHRESH(0));
CSR_WRITE(sc,WMREG_RXDCTL, RXDCTL_PTHRESH(0) |
RXDCTL_HTHRESH(0) | RXDCTL_WTHRESH(1) | RXDCTL_GRAN );
CSR_WRITE(sc,WMREG_TQSA_LO, 0);
CSR_WRITE(sc,WMREG_TQSA_HI, 0);
/*
* Set up checksum offload parameters for
* this packet.
*/
#ifdef RTEMS_CKSUM_OFFLOAD
if (m0->m_pkthdr.csum_flags & (M_CSUM_TSOv4|M_CSUM_TSOv6|
M_CSUM_IPv4|M_CSUM_TCPv4|M_CSUM_UDPv4|
M_CSUM_TCPv6|M_CSUM_UDPv6)) {
if (wm_tx_offload(sc, txs, &TxDescCmd,&cksumfields) != 0) {
/* Error message already displayed. */
continue;
}
} else {
#endif
TxDescCmd = 0;
cksumfields = 0;
#ifdef RTEMS_CKSUM_OFFLOAD
}
#endif
TxDescCmd |= WTX_CMD_EOP|WTX_CMD_IFCS|WTX_CMD_RS;
/* Initialize the transmit job descriptors. */
for (i = 0; i < NTXDESC; i++) {
sc->txs_mbuf[i] = 0;
sc->sc_txdescs[i].wtx_fields.wtxu_options=cksumfields;
sc->sc_txdescs[i].wtx_addr.wa_high = 0;
sc->sc_txdescs[i].wtx_addr.wa_low = 0;
sc->sc_txdescs[i].wtx_cmdlen = htole32(TxDescCmd);
}
/*
* Initialize the receive descriptor and receive job
* descriptor rings.
*/
memset( (void *) sc->sc_rxdescs, 0, sizeof(sc->sc_rxdescs));
CSR_WRITE(sc,WMREG_RDBAH, 0);
CSR_WRITE(sc,WMREG_RDBAL, WM_CDRXADDR(sc));
CSR_WRITE(sc,WMREG_RDLEN, sizeof(sc->sc_rxdescs));
CSR_WRITE(sc,WMREG_RDH, 0);
CSR_WRITE(sc,WMREG_RDT, 0);
CSR_WRITE(sc,WMREG_RDTR, 0 |RDTR_FPD);
/* CSR_WRITE(sc, WMREG_RADV, 256); not for 82544. */
for (i = 0; i < NRXDESC; i++) {
if (sc->rxs_mbuf[i] == NULL) {
if ((error = wm_add_rxbuf(sc, i)) != 0) {
printk("%s%d: unable to allocate or map rx buffer"
"%d, error = %d\n",ifp->if_name,ifp->if_unit, i, error);
/*
* XXX Should attempt to run with fewer receive
* XXX buffers instead of just failing.
*/
wm_rxdrain(sc);
return(error);
}
} else {
printk("sc->rxs_mbuf[%d] not NULL.\n", i);
wm_init_rxdesc(sc, i);
}
}
sc->sc_rxptr = 0;
sc->sc_rxdiscard = 0;
/*
* Clear out the VLAN table -- we don't use it (yet).
*/
CSR_WRITE(sc,WMREG_VET, 0);
for (i = 0; i < WM_VLAN_TABSIZE; i++)
CSR_WRITE(sc,WMREG_VFTA + (i << 2), 0);
#if 0
/* Use MOTLoad default
*
* Set up flow-control parameters.
*/
CSR_WRITE(sc,WMREG_FCAL, FCAL_CONST);/* same as MOTLOAD 0x00c28001 */
CSR_WRITE(sc,WMREG_FCAH, FCAH_CONST);/* same as MOTLOAD 0x00000100 */
CSR_WRITE(sc,WMREG_FCT, ETHERTYPE_FLOWCONTROL);/* same as MOTLoad 0x8808 */
/* safe,even though MOTLoad default all 0 */
sc->sc_fcrtl = FCRTL_DFLT;
CSR_WRITE(sc,WMREG_FCRTH, FCRTH_DFLT);
CSR_WRITE(sc,WMREG_FCRTL, sc->sc_fcrtl);
/*KATETO CSR_WRITE(sc,WMREG_FCTTV, FCTTV_DFLT);*/
CSR_WRITE(sc,WMREG_FCTTV, 0x100);
#endif
sc->sc_ctrl &= ~CTRL_VME;
/* TODO : not here.
Configures flow control settings after link is established
sc->sc_ctrl |= CTRL_TFCE | CTRL_RFCE; */
/* Write the control registers. */
CSR_WRITE(sc,WMREG_CTRL, sc->sc_ctrl);
#if 0
CSR_WRITE(sc,WMREG_CTRL_EXT, sc->sc_ctrl_ext);
#endif
/* MOTLoad : WMREG_RXCSUM (0x5000)= 0, no Rx checksum offloading */
#ifdef RTEMS_CKSUM_OFFLOAD
/*
* Set up checksum offload parameters.
*/
reg = CSR_READ(sc, WMREG_RXCSUM);
reg &= ~(RXCSUM_IPOFL | RXCSUM_IPV6OFL | RXCSUM_TUOFL);
if (ifp->if_capenable & IFCAP_CSUM_IPv4_Rx)
reg |= RXCSUM_IPOFL;
if (ifp->if_capenable & (IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Rx))
reg |= RXCSUM_IPOFL | RXCSUM_TUOFL;
if (ifp->if_capenable & (IFCAP_CSUM_TCPv6_Rx | IFCAP_CSUM_UDPv6_Rx))
reg |= RXCSUM_IPV6OFL | RXCSUM_TUOFL;
CSR_WRITE(sc, WMREG_RXCSUM, reg);
#endif
/*
* Set up the interrupt registers.
*/
CSR_WRITE(sc,WMREG_IMC, 0xffffffffU);
/* Reading the WMREG_ICR clears the interrupt bits */
CSR_READ(sc,WMREG_ICR);
/* printf("WMREG_IMS 0x%x\n", CSR_READ(sc,WMREG_IMS));*/
sc->sc_icr = ICR_TXDW | ICR_LSC | ICR_RXSEQ | ICR_RXCFG | ICR_RXDMT0 | ICR_RXO | ICR_RXT0;
CSR_WRITE(sc,WMREG_IMS, sc->sc_icr);
/* Set up the inter-packet gap. */
CSR_WRITE(sc,WMREG_TIPG, sc->sc_tipg);
#if 0 /* XXXJRT */
/* Set the VLAN ethernetype. */
CSR_WRITE(sc,WMREG_VET, ETHERTYPE_VLAN);
#endif
/*
* Set up the transmit control register; we start out with
* a collision distance suitable for FDX, but update it when
* we resolve the media type.
*/
sc->sc_tctl = TCTL_EN | TCTL_PSP | TCTL_CT(TX_COLLISION_THRESHOLD) |
TCTL_COLD(TX_COLLISION_DISTANCE_FDX) |
TCTL_RTLC /* retransmit on late collision */;
/*
* Set up the receive control register; we actually program
* the register when we set the receive filter. Use multicast
* address offset type 0.
*
* Only the i82544 has the ability to strip the incoming
* CRC (RCTL_SECRC).
*/
sc->sc_mchash_type = 0;
sc->sc_rctl = RCTL_EN | RCTL_LBM_NONE | RCTL_RDMTS_1_2 | RCTL_LPE |
RCTL_DPF | RCTL_MO(sc->sc_mchash_type)|RCTL_SECRC;
if (MCLBYTES == 2048) {
sc->sc_rctl |= RCTL_2k;
} else {
switch(MCLBYTES) {
case 4096:
sc->sc_rctl |= RCTL_BSEX | RCTL_BSEX_4k;
break;
case 8192:
sc->sc_rctl |= RCTL_BSEX | RCTL_BSEX_8k;
break;
case 16384:
sc->sc_rctl |= RCTL_BSEX | RCTL_BSEX_16k;
break;
default:
rtems_panic("wm_init: MCLBYTES %d unsupported",
MCLBYTES);
break;
}
}
#ifdef WM_DEBUG
printk("RDBAL 0x%x,RDLEN %d, RDT %d\n",CSR_READ(sc,WMREG_RDBAL),CSR_READ(sc,WMREG_RDLEN), CSR_READ(sc,WMREG_RDT));
#endif
/* Set the receive filter. */
wm_set_filter(sc);
CSR_WRITE(sc,WMREG_TCTL, sc->sc_tctl);
/* Map and establish our interrupt. */
if (!BSP_install_rtems_irq_handler(&i82544IrqData))
rtems_panic("1GHZ ethernet: unable to install ISR");
return(0);
}
void BSP_rdTIDV(void)
{
printf("Reg TIDV: 0x%" PRIx32 "\n", in_le32((volatile uint32_t *) (BSP_1GHz_membase+WMREG_TIDV)));
}
void BSP_rdRDTR(void)
{
printf("Reg RDTR: 0x%" PRIx32 "\n", in_le32((volatile uint32_t *) (BSP_1GHz_membase+WMREG_RDTR)));
}
void BSP_setTIDV(int val)
{
out_le32((volatile uint32_t *) (BSP_1GHz_membase+WMREG_TIDV), val);
}
void BSP_setRDTR(int val)
{
out_le32((volatile uint32_t *) (BSP_1GHz_membase+WMREG_RDTR), val);
}
/*
* i82544EI_ifinit: [ifnet interface function]
*
* Initialize the interface.
*/
static void i82544EI_ifinit(void *arg)
{
struct wm_softc *sc = (struct wm_softc*)arg;
#ifdef WM_DEBUG
printk("i82544EI_ifinit(): daemon ID: 0x%08x)\n", sc->daemonTid);
#endif
if (sc->daemonTid) {
#ifdef WM_DEBUG
printk("i82544EI: daemon already up, doing nothing\n");
#endif
return;
}
i82544EI_init_hw(sc);
sc->daemonTid = rtems_bsdnet_newproc(i82544EI_TASK_NAME,4096,i82544EI_daemon,arg);
/* ...all done! */
sc->arpcom.ac_if.if_flags |= IFF_RUNNING;
#ifdef WM_DEBUG
printk(")");
#endif
}
/*
* wm_txdrain:
*
* Drain the transmit queue.
*/
static void wm_txdrain(struct wm_softc *sc)
{
int i;
/* Release any queued transmit buffers. */
for (i = 0; i < NTXDESC; i++) {
if (sc->txs_mbuf[i] != NULL) {
m_freem(sc->txs_mbuf[i]);
sc->txs_mbuf[i] = NULL;
}
}
}
/*
* wm_rxdrain:
*
* Drain the receive queue.
*/
static void wm_rxdrain(struct wm_softc *sc)
{
int i;
for (i = 0; i < NRXDESC; i++) {
if (sc->rxs_mbuf[i] != NULL) {
m_freem(sc->rxs_mbuf[i]);
sc->rxs_mbuf[i] = NULL;
}
}
}
static void i82544EI_tx_stop(struct wm_softc *sc)
{
wm_txdrain(sc);
}
static void i82544EI_rx_stop(struct wm_softc *sc)
{
wm_rxdrain(sc);
}
static void i82544EI_stop_hw(struct wm_softc *sc)
{
#ifdef WM_DEBUG
printk("i82544EI_stop_hw(");
#endif
/* remove our interrupt handler which will also
* disable interrupts at the MPIC and the device
* itself
*/
if (!BSP_remove_rtems_irq_handler(&i82544IrqData))
rtems_panic("i82544EI: unable to remove IRQ handler!");
CSR_WRITE(sc,WMREG_IMS, 0);
sc->arpcom.ac_if.if_flags &= ~IFF_RUNNING;
i82544EI_tx_stop(sc);
i82544EI_rx_stop(sc);
#ifdef WM_DEBUG
printk(")");
#endif
}
/*
* wm_stop: [ifnet interface function]
*
* Stop transmission on the interface.
*/
static void wm_stop(struct ifnet *ifp, int disable)
{
struct wm_softc *sc = ifp->if_softc;
#ifdef WM_DEBUG
printk("wm_stop(");
#endif
/* Stop the transmit and receive processes. */
CSR_WRITE(sc,WMREG_TCTL, 0);
CSR_WRITE(sc,WMREG_RCTL, 0);
wm_txdrain(sc);
wm_rxdrain(sc);
/* Mark the interface as down */
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
#ifdef WM_DEBUG
printk(")\n");
#endif
}
/*
* wm_eeprom_sendbits:
*
* Send a series of bits to the EEPROM.
*/
static void wm_eeprom_sendbits(struct wm_softc *sc, uint32_t bits, int nbits)
{
uint32_t reg;
int x;
reg = CSR_READ(sc,WMREG_EECD);
for (x = nbits; x > 0; x--) {
if (bits & (1U << (x - 1)))
reg |= EECD_DI;
else
reg &= ~EECD_DI;
CSR_WRITE(sc,WMREG_EECD, reg);
rtems_bsp_delay(2);
CSR_WRITE(sc,WMREG_EECD, reg | EECD_SK);
rtems_bsp_delay(2);
CSR_WRITE(sc,WMREG_EECD, reg);
rtems_bsp_delay(2);
}
}
/*
* wm_eeprom_recvbits:
*
* Receive a series of bits from the EEPROM.
*/
static void wm_eeprom_recvbits(struct wm_softc *sc, uint32_t *valp, int nbits)
{
uint32_t reg, val;
int x;
reg = CSR_READ(sc,WMREG_EECD) & ~EECD_DI;
val = 0;
for (x = nbits; x > 0; x--) {
CSR_WRITE(sc,WMREG_EECD, reg | EECD_SK);
rtems_bsp_delay(2);
if (CSR_READ(sc,WMREG_EECD) & EECD_DO)
val |= (1U << (x - 1));
CSR_WRITE(sc,WMREG_EECD, reg);
rtems_bsp_delay(2);
}
*valp = val;
}
/*
* wm_read_eeprom_uwire:
*
* Read a word from the EEPROM using the MicroWire protocol.
*
* (The 82544EI Gigabit Ethernet Controller is compatible with
* most MicroWire interface, serial EEPROM devices.)
*/
static int wm_read_eeprom_uwire(struct wm_softc *sc, int word, int wordcnt, uint16_t *data)
{
uint32_t reg, val;
int i;
for (i = 0; i < wordcnt; i++) {
/* Clear SK and DI. */
reg = CSR_READ(sc,WMREG_EECD) & ~(EECD_SK | EECD_DI);
CSR_WRITE(sc,WMREG_EECD, reg);
/* Set CHIP SELECT. */
reg |= EECD_CS;
CSR_WRITE(sc,WMREG_EECD, reg);
rtems_bsp_delay(2);
/* Shift in the READ command. */
wm_eeprom_sendbits(sc, UWIRE_OPC_READ, 3);
/* Shift in address. */
wm_eeprom_sendbits(sc, word + i, sc->sc_ee_addrbits);
/* Shift out the data. */
wm_eeprom_recvbits(sc, &val, 16);
data[i] = val & 0xffff;
/* Clear CHIP SELECT. */
reg = CSR_READ(sc,WMREG_EECD) & ~EECD_CS;
CSR_WRITE(sc,WMREG_EECD, reg);
rtems_bsp_delay(2);
}
return (0);
}
#if 0
/*
* wm_acquire_eeprom:
*
* Perform the EEPROM handshake required on some chips.
*/
static int wm_acquire_eeprom(struct wm_softc *sc)
{
uint32_t reg;
int x;
reg = CSR_READ(sc,WMREG_EECD);
/* Request EEPROM access. */
reg |= EECD_EE_REQ;
CSR_WRITE(sc,WMREG_EECD, reg);
/* ..and wait for it to be granted. */
for (x = 0; x < 100; x++) {
reg = CSR_READ(sc,WMREG_EECD);
if (reg & EECD_EE_GNT) break;
rtems_bsp_delay(500);
}
if ((reg & EECD_EE_GNT) == 0) {
printk("Could not acquire EEPROM GNT x= %d\n", x);
reg &= ~EECD_EE_REQ;
CSR_WRITE(sc,WMREG_EECD, reg);
return (1);
}
return (0);
}
#endif
/*
* wm_read_eeprom:
*
* Read data from the serial EEPROM.
* 82544EI does not Perform the EEPROM handshake
*/
static int wm_read_eeprom(struct wm_softc *sc, int word, int wordcnt, uint16_t *data)
{
#if 0
/* base on the datasheet, this does not seem to be applicable */
if (wm_acquire_eeprom(sc))
return(1);
#endif
return(wm_read_eeprom_uwire(sc, word, wordcnt, data));
}
/*
* wm_add_rxbuf:
*
* Add a receive buffer to the indiciated descriptor.
*/
static int wm_add_rxbuf(struct wm_softc *sc, int idx)
{
struct mbuf *m;
MGETHDR(m, M_WAIT, MT_DATA);
if (m == NULL) return (ENOBUFS);
MCLGET(m, M_WAIT);
if ((m->m_flags & M_EXT) == 0) {
m_freem(m);
return (ENOBUFS);
}
m->m_pkthdr.rcvif = &sc->arpcom.ac_if;
sc->rxs_mbuf[idx] = m;
/* m->m_len = m->m_pkthdr.len = m->m_ext.ext_size;*/
wm_init_rxdesc(sc, idx);
#if 0
printk("sc->rxs_mbuf[%d]= 0x%x, mbuf @ 0x%x\n",
idx, sc->rxs_mbuf[idx], le32toh(sc->sc_rxdescs[idx].wrx_addr.wa_low));
#endif
return(0);
}
/*
* wm_set_ral:
*
* Set an entery in the receive address list.
*/
static void
wm_set_ral(struct wm_softc *sc, const uint8_t *enaddr, int idx)
{
uint32_t ral_lo, ral_hi;
if (enaddr != NULL) {
ral_lo = enaddr[0]|(enaddr[1] << 8)|(enaddr[2] << 16)|(enaddr[3] << 24);
ral_hi = enaddr[4] | (enaddr[5] << 8);
ral_hi |= RAL_AV;
} else {
ral_lo = 0;
ral_hi = 0;
}
CSR_WRITE(sc,WMREG_RAL_LO(WMREG_CORDOVA_RAL_BASE, idx),ral_lo);
CSR_WRITE(sc,WMREG_RAL_HI(WMREG_CORDOVA_RAL_BASE, idx),ral_hi);
}
/*
* wm_mchash:
*
* Compute the hash of the multicast address for the 4096-bit
* multicast filter.
*/
static uint32_t
wm_mchash(struct wm_softc *sc, const uint8_t *enaddr)
{
static const int lo_shift[4] = { 4, 3, 2, 0 };
static const int hi_shift[4] = { 4, 5, 6, 8 };
uint32_t hash;
hash = (enaddr[4] >> lo_shift[sc->sc_mchash_type]) |
(((uint16_t) enaddr[5]) << hi_shift[sc->sc_mchash_type]);
return (hash & 0xfff);
}
/*
* wm_set_filter: Set up the receive filter.
*/
static void wm_set_filter(struct wm_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct ether_multi *enm;
struct ether_multistep step;
uint32_t mta_reg;
uint32_t hash, reg, bit;
int i;
#ifdef WM_DEBUG
printk("wm_set_filter(");
#endif
mta_reg = WMREG_CORDOVA_MTA;
sc->sc_rctl &= ~(RCTL_BAM | RCTL_UPE | RCTL_MPE);
if (ifp->if_flags & IFF_BROADCAST)
sc->sc_rctl |= RCTL_BAM;
if (ifp->if_flags & IFF_PROMISC) {
sc->sc_rctl |= RCTL_UPE;
goto allmulti;
}
/*
* Set the station address in the first RAL slot, and
* clear the remaining slots.
*/
wm_set_ral(sc, sc->arpcom.ac_enaddr, 0);
for (i = 1; i < WM_RAL_TABSIZE; i++)
wm_set_ral(sc, NULL, i);
/* Clear out the multicast table. */
for (i = 0; i < WM_MC_TABSIZE; i++)
CSR_WRITE(sc,mta_reg + (i << 2), 0);
ETHER_FIRST_MULTI(step, &sc->arpcom, enm);
while (enm != NULL) {
if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) {
/*
* We must listen to a range of multicast addresses.
* For now, just accept all multicasts, rather than
* trying to set only those filter bits needed to match
* the range. (At this time, the only use of address
* ranges is for IP multicast routing, for which the
* range is big enough to require all bits set.)
*/
goto allmulti;
}
hash = wm_mchash(sc, enm->enm_addrlo);
reg = (hash >> 5) & 0x7f;
bit = hash & 0x1f;
hash = CSR_READ(sc,mta_reg + (reg << 2));
hash |= 1U << bit;
/* XXX Hardware bug?? */
if ((reg & 0xe) == 1) {
bit = CSR_READ(sc,mta_reg + ((reg - 1) << 2));
CSR_WRITE(sc,mta_reg + (reg << 2), hash);
CSR_WRITE(sc,mta_reg + ((reg - 1) << 2), bit);
} else
CSR_WRITE(sc,mta_reg + (reg << 2), hash);
ETHER_NEXT_MULTI(step, enm);
}
ifp->if_flags &= ~IFF_ALLMULTI;
goto setit;
allmulti:
ifp->if_flags |= IFF_ALLMULTI;
sc->sc_rctl |= RCTL_MPE;
setit:
CSR_WRITE(sc,WMREG_RCTL, sc->sc_rctl);
#ifdef WM_DEBUG
printk("RCTL 0x%x)\n", CSR_READ(sc,WMREG_RCTL));
#endif
}
static void i82544EI_error(struct wm_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
unsigned long intr_status= sc->if_errsts[sc->if_err_ptr1];
/* read and reset the status; because this is written
* by the ISR, we must disable interrupts here
*/
if (intr_status) {
printk("Error %s%d:", ifp->if_name, ifp->if_unit);
if (intr_status & ICR_RXSEQ) {
printk("Rxq framing error (ICR= %x), if_ierrors %d\n",
intr_status, ifp->if_ierrors);
}
}
else
printk("%s%d: Ghost interrupt ?\n",ifp->if_name,ifp->if_unit);
sc->if_errsts[sc->if_err_ptr1]=0;
if ((++sc->if_err_ptr1)==IF_ERR_BUFSZE) sc->if_err_ptr1=0; /* Till Straumann */
}
void i82544EI_printStats(void)
{
i82544EI_stats(root_i82544EI_dev);
}
/* The daemon does all of the work; RX, TX and cleaning up buffers/descriptors */
static void i82544EI_daemon(void *arg)
{
struct wm_softc *sc = (struct wm_softc*)arg;
rtems_event_set events;
struct mbuf *m=0;
struct ifnet *ifp=&sc->arpcom.ac_if;
#ifdef WM_DEBUG
printk("i82544EI_daemon()\n");
#endif
/* NOTE: our creator possibly holds the bsdnet_semaphore.
* since that has PRIORITY_INVERSION enabled, our
* subsequent call to bsdnet_event_receive() will
* _not_ release it. It's still in posession of our
* owner.
* This is different from how killing this task
* is handled.
*/
for (;;) {
/* sleep until there's work to be done */
/* Note: bsdnet_event_receive() acquires
* the global bsdnet semaphore for
* mutual exclusion.
*/
rtems_bsdnet_event_receive(ALL_EVENTS,
RTEMS_WAIT | RTEMS_EVENT_ANY,
RTEMS_NO_TIMEOUT,
&events);
if (KILL_EVENT & events) break;
if (events & RX_EVENT) i82544EI_rx(sc); /* in ISR instead */
/* clean up and try sending packets */
do {
i82544EI_txq_done(sc);
while (sc->txq_free>0) {
if (sc->txq_free>TXQ_HiLmt_OFF) {
m=0;
IF_DEQUEUE(&ifp->if_snd,m);
if (m==0) break;
i82544EI_sendpacket(sc, m);
}
else {
i82544EI_txq_done(sc);
break;
}
}
/* we leave this loop
* - either because there's no free buffer
* (m=0 initializer && !sc->txq_free)
* - or there's nothing to send (IF_DEQUEUE
* returned 0
*/
} while (m);
ifp->if_flags &= ~IFF_OACTIVE;
/* Log errors and other uncommon events. */
if (events & ERR_EVENT) i82544EI_error(sc);
/* Rx overrun */
if ( events & INIT_EVENT) {
printk("Warnning, Rx overrun. Make sure the old mbuf was free\n");
i82544EI_ifinit(arg);
}
} /* end for(;;) { rtems_bsdnet_event_receive() .....*/
printf("out of daemon\n");
ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE);
/* shut down the hardware */
i82544EI_stop_hw(sc);
/* flush the output queue */
for (;;) {
IF_DEQUEUE(&ifp->if_snd,m);
if (!m) break;
m_freem(m);
}
/* as of 'rtems_bsdnet_event_receive()' we own the
* networking semaphore
*/
rtems_bsdnet_semaphore_release();
rtems_semaphore_release(sc->daemonSync);
/* Note that I dont use sc->daemonTid here -
* theoretically, that variable could already
* hold a newly created TID
*/
rtems_task_delete(RTEMS_SELF);
}
/*
* wm_gmii_reset:
*
* Reset the PHY.
*/
static void wm_gmii_reset(struct wm_softc *sc)
{
CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl | CTRL_PHY_RESET);
rtems_bsp_delay(20000);
CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl);
rtems_bsp_delay(20000);
}
/*
* wm_gmii_mediainit:
*
* Initialize media for use on 1000BASE-T devices.
*/
static void wm_gmii_mediainit(struct wm_softc *sc)
{
/* struct ifnet *ifp = &sc->arpcom.ac_if;*/
/* We have MII. */
sc->sc_flags |= WM_F_HAS_MII;
#if 0
/* <skf> May 2009 : The value that should be programmed into IPGT is 10 */
sc->sc_tipg = TIPG_IPGT(10)+TIPG_IPGR1(8)+TIPG_IPGR2(6);
#else
sc->sc_tipg = TIPG_1000T_DFLT; /* 0x602008 */
#endif
/*
* Let the chip set speed/duplex on its own based on
* signals from the PHY.
* XXXbouyer - I'm not sure this is right for the 80003,
* the em driver only sets CTRL_SLU here - but it seems to work.
*/
sc->sc_ctrl |= CTRL_SLU;
CSR_WRITE(sc, WMREG_CTRL, sc->sc_ctrl);
wm_gmii_reset(sc);
#if 0
/* Initialize our media structures and probe the GMII. */
sc->sc_mii.mii_ifp = ifp;
sc->sc_mii.mii_readreg = wm_gmii_i82544_readreg;
sc->sc_mii.mii_writereg = wm_gmii_i82544_writereg;
sc->sc_mii.mii_statchg = wm_gmii_statchg;
ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, wm_gmii_mediachange,
wm_gmii_mediastatus);
mii_attach(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY,
MII_OFFSET_ANY, MIIF_DOPAUSE);
if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
} else
ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
#endif
}