diff options
Diffstat (limited to 'freebsd/dev/e1000/if_lem.h')
| -rw-r--r-- | freebsd/dev/e1000/if_lem.h | 492 |
1 files changed, 492 insertions, 0 deletions
diff --git a/freebsd/dev/e1000/if_lem.h b/freebsd/dev/e1000/if_lem.h new file mode 100644 index 00000000..21287b61 --- /dev/null +++ b/freebsd/dev/e1000/if_lem.h @@ -0,0 +1,492 @@ +/****************************************************************************** + + Copyright (c) 2001-2010, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + + +#ifndef _LEM_HH_DEFINED_ +#define _LEM_HH_DEFINED_ + + +/* Tunables */ + +/* + * EM_TXD: Maximum number of Transmit Descriptors + * Valid Range: 80-256 for 82542 and 82543-based adapters + * 80-4096 for others + * Default Value: 256 + * This value is the number of transmit descriptors allocated by the driver. + * Increasing this value allows the driver to queue more transmits. Each + * descriptor is 16 bytes. + * Since TDLEN should be multiple of 128bytes, the number of transmit + * desscriptors should meet the following condition. + * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 + */ +#define EM_MIN_TXD 80 +#define EM_MAX_TXD_82543 256 +#define EM_MAX_TXD 4096 +#define EM_DEFAULT_TXD EM_MAX_TXD_82543 + +/* + * EM_RXD - Maximum number of receive Descriptors + * Valid Range: 80-256 for 82542 and 82543-based adapters + * 80-4096 for others + * Default Value: 256 + * This value is the number of receive descriptors allocated by the driver. + * Increasing this value allows the driver to buffer more incoming packets. + * Each descriptor is 16 bytes. A receive buffer is also allocated for each + * descriptor. The maximum MTU size is 16110. + * Since TDLEN should be multiple of 128bytes, the number of transmit + * desscriptors should meet the following condition. + * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 + */ +#define EM_MIN_RXD 80 +#define EM_MAX_RXD_82543 256 +#define EM_MAX_RXD 4096 +#define EM_DEFAULT_RXD EM_MAX_RXD_82543 + +/* + * EM_TIDV - Transmit Interrupt Delay Value + * Valid Range: 0-65535 (0=off) + * Default Value: 64 + * This value delays the generation of transmit interrupts in units of + * 1.024 microseconds. Transmit interrupt reduction can improve CPU + * efficiency if properly tuned for specific network traffic. If the + * system is reporting dropped transmits, this value may be set too high + * causing the driver to run out of available transmit descriptors. + */ +#define EM_TIDV 64 + +/* + * EM_TADV - Transmit Absolute Interrupt Delay Value + * (Not valid for 82542/82543/82544) + * Valid Range: 0-65535 (0=off) + * Default Value: 64 + * This value, in units of 1.024 microseconds, limits the delay in which a + * transmit interrupt is generated. Useful only if EM_TIDV is non-zero, + * this value ensures that an interrupt is generated after the initial + * packet is sent on the wire within the set amount of time. Proper tuning, + * along with EM_TIDV, may improve traffic throughput in specific + * network conditions. + */ +#define EM_TADV 64 + +/* + * EM_RDTR - Receive Interrupt Delay Timer (Packet Timer) + * Valid Range: 0-65535 (0=off) + * Default Value: 0 + * This value delays the generation of receive interrupts in units of 1.024 + * microseconds. Receive interrupt reduction can improve CPU efficiency if + * properly tuned for specific network traffic. Increasing this value adds + * extra latency to frame reception and can end up decreasing the throughput + * of TCP traffic. If the system is reporting dropped receives, this value + * may be set too high, causing the driver to run out of available receive + * descriptors. + * + * CAUTION: When setting EM_RDTR to a value other than 0, adapters + * may hang (stop transmitting) under certain network conditions. + * If this occurs a WATCHDOG message is logged in the system + * event log. In addition, the controller is automatically reset, + * restoring the network connection. To eliminate the potential + * for the hang ensure that EM_RDTR is set to 0. + */ +#define EM_RDTR 0 + +/* + * Receive Interrupt Absolute Delay Timer (Not valid for 82542/82543/82544) + * Valid Range: 0-65535 (0=off) + * Default Value: 64 + * This value, in units of 1.024 microseconds, limits the delay in which a + * receive interrupt is generated. Useful only if EM_RDTR is non-zero, + * this value ensures that an interrupt is generated after the initial + * packet is received within the set amount of time. Proper tuning, + * along with EM_RDTR, may improve traffic throughput in specific network + * conditions. + */ +#define EM_RADV 64 + +/* + * This parameter controls the max duration of transmit watchdog. + */ +#define EM_WATCHDOG (10 * hz) + +/* + * This parameter controls when the driver calls the routine to reclaim + * transmit descriptors. + */ +#define EM_TX_CLEANUP_THRESHOLD (adapter->num_tx_desc / 8) +#define EM_TX_OP_THRESHOLD (adapter->num_tx_desc / 32) + +/* + * This parameter controls whether or not autonegotation is enabled. + * 0 - Disable autonegotiation + * 1 - Enable autonegotiation + */ +#define DO_AUTO_NEG 1 + +/* + * This parameter control whether or not the driver will wait for + * autonegotiation to complete. + * 1 - Wait for autonegotiation to complete + * 0 - Don't wait for autonegotiation to complete + */ +#define WAIT_FOR_AUTO_NEG_DEFAULT 0 + +/* Tunables -- End */ + +#define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ + ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ + ADVERTISE_1000_FULL) + +#define AUTO_ALL_MODES 0 + +/* PHY master/slave setting */ +#define EM_MASTER_SLAVE e1000_ms_hw_default + +/* + * Micellaneous constants + */ +#define EM_VENDOR_ID 0x8086 +#define EM_FLASH 0x0014 + +#define EM_JUMBO_PBA 0x00000028 +#define EM_DEFAULT_PBA 0x00000030 +#define EM_SMARTSPEED_DOWNSHIFT 3 +#define EM_SMARTSPEED_MAX 15 +#define EM_MAX_LOOP 10 + +#define MAX_NUM_MULTICAST_ADDRESSES 128 +#define PCI_ANY_ID (~0U) +#define ETHER_ALIGN 2 +#define EM_FC_PAUSE_TIME 0x0680 +#define EM_EEPROM_APME 0x400; +#define EM_82544_APME 0x0004; + +/* Code compatilbility between 6 and 7 */ +#ifndef ETHER_BPF_MTAP +#define ETHER_BPF_MTAP BPF_MTAP +#endif + +/* + * TDBA/RDBA should be aligned on 16 byte boundary. But TDLEN/RDLEN should be + * multiple of 128 bytes. So we align TDBA/RDBA on 128 byte boundary. This will + * also optimize cache line size effect. H/W supports up to cache line size 128. + */ +#define EM_DBA_ALIGN 128 + +#define SPEED_MODE_BIT (1<<21) /* On PCI-E MACs only */ + +/* PCI Config defines */ +#define EM_BAR_TYPE(v) ((v) & EM_BAR_TYPE_MASK) +#define EM_BAR_TYPE_MASK 0x00000001 +#define EM_BAR_TYPE_MMEM 0x00000000 +#define EM_BAR_TYPE_IO 0x00000001 +#define EM_BAR_TYPE_FLASH 0x0014 +#define EM_BAR_MEM_TYPE(v) ((v) & EM_BAR_MEM_TYPE_MASK) +#define EM_BAR_MEM_TYPE_MASK 0x00000006 +#define EM_BAR_MEM_TYPE_32BIT 0x00000000 +#define EM_BAR_MEM_TYPE_64BIT 0x00000004 +#define EM_MSIX_BAR 3 /* On 82575 */ + +/* Defines for printing debug information */ +#define DEBUG_INIT 0 +#define DEBUG_IOCTL 0 +#define DEBUG_HW 0 + +#define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n") +#define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A) +#define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B) +#define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n") +#define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A) +#define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B) +#define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n") +#define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A) +#define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B) + +#define EM_MAX_SCATTER 64 +#define EM_VFTA_SIZE 128 +#define EM_TSO_SIZE (65535 + sizeof(struct ether_vlan_header)) +#define EM_TSO_SEG_SIZE 4096 /* Max dma segment size */ +#define EM_MSIX_MASK 0x01F00000 /* For 82574 use */ +#define ETH_ZLEN 60 +#define ETH_ADDR_LEN 6 +#define CSUM_OFFLOAD 7 /* Offload bits in mbuf flag */ + +/* + * 82574 has a nonstandard address for EIAC + * and since its only used in MSIX, and in + * the em driver only 82574 uses MSIX we can + * solve it just using this define. + */ +#define EM_EIAC 0x000DC + +/* Used in for 82547 10Mb Half workaround */ +#define EM_PBA_BYTES_SHIFT 0xA +#define EM_TX_HEAD_ADDR_SHIFT 7 +#define EM_PBA_TX_MASK 0xFFFF0000 +#define EM_FIFO_HDR 0x10 +#define EM_82547_PKT_THRESH 0x3e0 + +/* Precision Time Sync (IEEE 1588) defines */ +#define ETHERTYPE_IEEE1588 0x88F7 +#define PICOSECS_PER_TICK 20833 +#define TSYNC_PORT 319 /* UDP port for the protocol */ + +/* + * Bus dma allocation structure used by + * e1000_dma_malloc and e1000_dma_free. + */ +struct em_dma_alloc { + bus_addr_t dma_paddr; + caddr_t dma_vaddr; + bus_dma_tag_t dma_tag; + bus_dmamap_t dma_map; + bus_dma_segment_t dma_seg; + int dma_nseg; +}; + +struct adapter; + +struct em_int_delay_info { + struct adapter *adapter; /* Back-pointer to the adapter struct */ + int offset; /* Register offset to read/write */ + int value; /* Current value in usecs */ +}; + +/* Our adapter structure */ +struct adapter { + struct ifnet *ifp; +#if __FreeBSD_version >= 800000 + struct buf_ring *br; +#endif + struct e1000_hw hw; + + /* FreeBSD operating-system-specific structures. */ + struct e1000_osdep osdep; + struct device *dev; + struct cdev *led_dev; + + struct resource *memory; + struct resource *flash; + struct resource *msix; + + struct resource *ioport; + int io_rid; + + /* 82574 may use 3 int vectors */ + struct resource *res[3]; + void *tag[3]; + int rid[3]; + + struct ifmedia media; + struct callout timer; + struct callout tx_fifo_timer; + bool watchdog_check; + int watchdog_time; + int msi; + int if_flags; + int max_frame_size; + int min_frame_size; + struct mtx core_mtx; + struct mtx tx_mtx; + struct mtx rx_mtx; + int em_insert_vlan_header; + + /* Task for FAST handling */ + struct task link_task; + struct task rxtx_task; + struct task rx_task; + struct task tx_task; + struct taskqueue *tq; /* private task queue */ + + eventhandler_tag vlan_attach; + eventhandler_tag vlan_detach; + u32 num_vlans; + + /* Management and WOL features */ + u32 wol; + bool has_manage; + bool has_amt; + + /* Multicast array memory */ + u8 *mta; + + /* + ** Shadow VFTA table, this is needed because + ** the real vlan filter table gets cleared during + ** a soft reset and the driver needs to be able + ** to repopulate it. + */ + u32 shadow_vfta[EM_VFTA_SIZE]; + + /* Info about the interface */ + uint8_t link_active; + uint16_t link_speed; + uint16_t link_duplex; + uint32_t smartspeed; + uint32_t fc_setting; + + struct em_int_delay_info tx_int_delay; + struct em_int_delay_info tx_abs_int_delay; + struct em_int_delay_info rx_int_delay; + struct em_int_delay_info rx_abs_int_delay; + + /* + * Transmit definitions + * + * We have an array of num_tx_desc descriptors (handled + * by the controller) paired with an array of tx_buffers + * (at tx_buffer_area). + * The index of the next available descriptor is next_avail_tx_desc. + * The number of remaining tx_desc is num_tx_desc_avail. + */ + struct em_dma_alloc txdma; /* bus_dma glue for tx desc */ + struct e1000_tx_desc *tx_desc_base; + uint32_t next_avail_tx_desc; + uint32_t next_tx_to_clean; + volatile uint16_t num_tx_desc_avail; + uint16_t num_tx_desc; + uint16_t last_hw_offload; + uint32_t txd_cmd; + struct em_buffer *tx_buffer_area; + bus_dma_tag_t txtag; /* dma tag for tx */ + uint32_t tx_tso; /* last tx was tso */ + + /* + * Receive definitions + * + * we have an array of num_rx_desc rx_desc (handled by the + * controller), and paired with an array of rx_buffers + * (at rx_buffer_area). + * The next pair to check on receive is at offset next_rx_desc_to_check + */ + struct em_dma_alloc rxdma; /* bus_dma glue for rx desc */ + struct e1000_rx_desc *rx_desc_base; + uint32_t next_rx_desc_to_check; + uint32_t rx_buffer_len; + uint16_t num_rx_desc; + int rx_process_limit; + struct em_buffer *rx_buffer_area; + bus_dma_tag_t rxtag; + bus_dmamap_t rx_sparemap; + + /* + * First/last mbuf pointers, for + * collecting multisegment RX packets. + */ + struct mbuf *fmp; + struct mbuf *lmp; + + /* Misc stats maintained by the driver */ + unsigned long dropped_pkts; + unsigned long mbuf_alloc_failed; + unsigned long mbuf_cluster_failed; + unsigned long no_tx_desc_avail1; + unsigned long no_tx_desc_avail2; + unsigned long no_tx_map_avail; + unsigned long no_tx_dma_setup; + unsigned long watchdog_events; + unsigned long rx_overruns; + unsigned long rx_irq; + unsigned long tx_irq; + unsigned long link_irq; + + /* 82547 workaround */ + uint32_t tx_fifo_size; + uint32_t tx_fifo_head; + uint32_t tx_fifo_head_addr; + uint64_t tx_fifo_reset_cnt; + uint64_t tx_fifo_wrk_cnt; + uint32_t tx_head_addr; + + /* For 82544 PCIX Workaround */ + boolean_t pcix_82544; + boolean_t in_detach; + + + struct e1000_hw_stats stats; +}; + +/* ****************************************************************************** + * vendor_info_array + * + * This array contains the list of Subvendor/Subdevice IDs on which the driver + * should load. + * + * ******************************************************************************/ +typedef struct _em_vendor_info_t { + unsigned int vendor_id; + unsigned int device_id; + unsigned int subvendor_id; + unsigned int subdevice_id; + unsigned int index; +} em_vendor_info_t; + +struct em_buffer { + int next_eop; /* Index of the desc to watch */ + struct mbuf *m_head; + bus_dmamap_t map; /* bus_dma map for packet */ +}; + +/* For 82544 PCIX Workaround */ +typedef struct _ADDRESS_LENGTH_PAIR +{ + uint64_t address; + uint32_t length; +} ADDRESS_LENGTH_PAIR, *PADDRESS_LENGTH_PAIR; + +typedef struct _DESCRIPTOR_PAIR +{ + ADDRESS_LENGTH_PAIR descriptor[4]; + uint32_t elements; +} DESC_ARRAY, *PDESC_ARRAY; + +#define EM_CORE_LOCK_INIT(_sc, _name) \ + mtx_init(&(_sc)->core_mtx, _name, "EM Core Lock", MTX_DEF) +#define EM_TX_LOCK_INIT(_sc, _name) \ + mtx_init(&(_sc)->tx_mtx, _name, "EM TX Lock", MTX_DEF) +#define EM_RX_LOCK_INIT(_sc, _name) \ + mtx_init(&(_sc)->rx_mtx, _name, "EM RX Lock", MTX_DEF) +#define EM_CORE_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->core_mtx) +#define EM_TX_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->tx_mtx) +#define EM_RX_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->rx_mtx) +#define EM_CORE_LOCK(_sc) mtx_lock(&(_sc)->core_mtx) +#define EM_TX_LOCK(_sc) mtx_lock(&(_sc)->tx_mtx) +#define EM_TX_TRYLOCK(_sc) mtx_trylock(&(_sc)->tx_mtx) +#define EM_RX_LOCK(_sc) mtx_lock(&(_sc)->rx_mtx) +#define EM_CORE_UNLOCK(_sc) mtx_unlock(&(_sc)->core_mtx) +#define EM_TX_UNLOCK(_sc) mtx_unlock(&(_sc)->tx_mtx) +#define EM_RX_UNLOCK(_sc) mtx_unlock(&(_sc)->rx_mtx) +#define EM_CORE_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->core_mtx, MA_OWNED) +#define EM_TX_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->tx_mtx, MA_OWNED) + +#endif /* _LEM_HH_DEFINED_ */ |