/*
* Network configuration for IceCube in RTEMS Lab
*
************************************************************
* EDIT THIS FILE TO REFLECT YOUR NETWORK CONFIGURATION *
* BEFORE RUNNING ANY RTEMS PROGRAMS WHICH USE THE NETWORK! *
************************************************************
*/
#ifndef _RTEMS_NETWORKCONFIG_H_
#define _RTEMS_NETWORKCONFIG_H_
/*
* The following will normally be set by the BSP if it supports
* a single network device driver. In the event, it supports
* multiple network device drivers, then the user's default
* network device driver will have to be selected by a BSP
* specific mechanism.
*/
#ifndef RTEMS_BSP_NETWORK_DRIVER_NAME
#warning "RTEMS_BSP_NETWORK_DRIVER_NAME is not defined"
#define RTEMS_BSP_NETWORK_DRIVER_NAME "no_network1"
#endif
#ifndef RTEMS_BSP_NETWORK_DRIVER_ATTACH
#warning "RTEMS_BSP_NETWORK_DRIVER_ATTACH is not defined"
#define RTEMS_BSP_NETWORK_DRIVER_ATTACH 0
#endif
/* #define RTEMS_USE_BOOTP */
#include <bsp.h>
/*
* Define RTEMS_SET_ETHERNET_ADDRESS if you want to specify the
* Ethernet address here. If RTEMS_SET_ETHERNET_ADDRESS is not
* defined the driver will choose an address.
*/
#define RTEMS_SET_ETHERNET_ADDRESS
#if (defined (RTEMS_SET_ETHERNET_ADDRESS))
static char ethernet_address[6] = { 0x00, 0x04, 0x9F, 0x00, 0x5B, 0x21 };
#endif
/*
* Default network interface
*/
static struct rtems_bsdnet_ifconfig netdriver_config = {
RTEMS_BSP_NETWORK_DRIVER_NAME, /* name */
RTEMS_BSP_NETWORK_DRIVER_ATTACH, /* attach function */
NULL, /* No more interfaces */
#if (defined (RTEMS_USE_BOOTP))
NULL, /* BOOTP supplies IP address */
NULL, /* BOOTP supplies IP net mask */
#else
"192.168.1.244", /* IP address */
"255.255.255.0", /* IP net mask */
#endif /* !RTEMS_USE_BOOTP */
#if (defined (RTEMS_SET_ETHERNET_ADDRESS))
ethernet_address, /* Ethernet hardware address */
#else
NULL, /* Driver supplies hardware address */
#endif
0, /* Use default driver parameters */
0, /* mtu */
0, /* rbuf_count */
0, /* xbuf_count */
0, /* port */
0 /* irq */
};
/*
* Network configuration
*/
struct rtems_bsdnet_config rtems_bsdnet_config = {
&netdriver_config,
#if (defined (RTEMS_USE_BOOTP))
rtems_bsdnet_do_bootp,
#else
NULL,
#endif
0, /* Default network task priority */
256 * 1024, /* Default mbuf capacity */
256 * 1024, /* Default mbuf cluster capacity */
#if (!defined (RTEMS_USE_BOOTP))
"rtems", /* Host name */
"nodomain.com", /* Domain name */
"192.168.1.14", /* Gateway */
"192.168.1.1", /* Log host */
{"192.168.1.1" }, /* Name server(s) */
{"192.168.1.1" }, /* NTP server(s) */
#else
NULL, /* Host name */
NULL, /* Domain name */
NULL, /* Gateway */
NULL, /* Log host */
{ NULL }, /* Name server(s) */
{ NULL }, /* NTP server(s) */
#endif /* !RTEMS_USE_BOOTP */
0, /* efficiency */
0, /* udp TX buffer */
0, /* udp RX buffer */
0, /* tcp TX buffer */
0, /* tcp RX buffer */
};
/*
* For TFTP test application
*/
#if (defined (RTEMS_USE_BOOTP))
#define RTEMS_TFTP_TEST_HOST_NAME "BOOTP_HOST"
#define RTEMS_TFTP_TEST_FILE_NAME "BOOTP_FILE"
#else
#define RTEMS_TFTP_TEST_HOST_NAME "XXX.YYY.ZZZ.XYZ"
#define RTEMS_TFTP_TEST_FILE_NAME "tftptest"
#endif
/*
* For NFS test application
*
* NFS server/path to mount and a directory to ls once mounted
*/
#define RTEMS_NFS_SERVER "192.168.1.210"
#define RTEMS_NFS_SERVER_PATH "/home"
#define RTEMS_NFS_LS_PATH "/mnt/nfstest"
#endif /* _RTEMS_NETWORKCONFIG_H_ */