diff options
Diffstat (limited to 'cpukit/libnetworking/librtemsNfs.h')
-rw-r--r-- | cpukit/libnetworking/librtemsNfs.h | 231 |
1 files changed, 0 insertions, 231 deletions
diff --git a/cpukit/libnetworking/librtemsNfs.h b/cpukit/libnetworking/librtemsNfs.h deleted file mode 100644 index ce83d03db4..0000000000 --- a/cpukit/libnetworking/librtemsNfs.h +++ /dev/null @@ -1,231 +0,0 @@ -/** - * @file - * - * @ingroup RTEMSFileSystemNFS - * - * @brief This header file provides interfaces of the NFSv2 client. - */ - -/* - * Author: Till Straumann <strauman@slac.stanford.edu> 2002-2003 - * - * Authorship - * ---------- - * This software (NFS-2 client implementation for RTEMS) was created by - * Till Straumann <strauman@slac.stanford.edu>, 2002-2007, - * Stanford Linear Accelerator Center, Stanford University. - * - * Acknowledgement of sponsorship - * ------------------------------ - * The NFS-2 client implementation for RTEMS was produced by - * the Stanford Linear Accelerator Center, Stanford University, - * under Contract DE-AC03-76SFO0515 with the Department of Energy. - * - * Government disclaimer of liability - * ---------------------------------- - * Neither the United States nor the United States Department of Energy, - * nor any of their employees, makes any warranty, express or implied, or - * assumes any legal liability or responsibility for the accuracy, - * completeness, or usefulness of any data, apparatus, product, or process - * disclosed, or represents that its use would not infringe privately owned - * rights. - * - * Stanford disclaimer of liability - * -------------------------------- - * Stanford University makes no representations or warranties, express or - * implied, nor assumes any liability for the use of this software. - * - * Stanford disclaimer of copyright - * -------------------------------- - * Stanford University, owner of the copyright, hereby disclaims its - * copyright and all other rights in this software. Hence, anyone may - * freely use it for any purpose without restriction. - * - * Maintenance of notices - * ---------------------- - * In the interest of clarity regarding the origin and status of this - * SLAC software, this and all the preceding Stanford University notices - * are to remain affixed to any copy or derivative of this software made - * or distributed by the recipient and are to be affixed to any copy of - * software made or distributed by the recipient that contains a copy or - * derivative of this software. - * - * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03 - */ - -#ifndef LIB_RTEMS_NFS_CLIENT_H -#define LIB_RTEMS_NFS_CLIENT_H - -/** - * @defgroup RTEMSFileSystemNFS NFSv2 Client - * - * @ingroup FileSystemTypesAndMount - * - * @{ - */ - -#include <rtems.h> -#include <rtems/libio.h> -#include <rtems/libio_.h> -#include <rtems/seterr.h> -#include <string.h> -#include <stdio.h> -#include <stdlib.h> -#include <assert.h> -#include <sys/stat.h> -#include <dirent.h> -#include <netdb.h> -#include <ctype.h> -#include <netinet/in.h> -#include <arpa/inet.h> - -#ifdef __cplusplus -extern "C" { -#endif - -/** RPCIO driver interface. - * If you need RPCIO for other purposes than NFS - * you may want to include <rpcio.h> -#include "rpcio.h" - */ - -/** Priority of daemon; may be setup prior to calling rpcUdpInit(); - * otherwise the network task priority from the rtems_bsdnet_config - * is used... - */ -extern rtems_task_priority rpciodPriority; - -#ifdef RTEMS_SMP -/** CPU affinity of daemon; may be setup prior to calling rpcUdpInit(); - * otherwise the network task CPU affinity from the rtems_bsdnet_config - * is used... - */ -extern const cpu_set_t *rpciodCpuset; -extern size_t rpciodCpusetSize; -#endif - -/** - * @brief Sets the XIDs of the RPC transaction hash table. - * - * The active RPC transactions are stored in a hash table. Each table entry - * contains the XID of its corresponding transaction. The XID consists of two - * parts. The lower part is determined by the hash table index. The upper - * part is incremented in each send operation. - * - * This function sets the upper part of the XID in all hash table entries. - * This can be used to ensure that the XIDs are not reused in a short interval - * for example during a boot process or after resets. - * - * @param[in] xid The upper part is used to set the upper XID part of the hash - * table entries. - */ -void -rpcSetXIDs(uint32_t xid); - -/** Initialize the driver. - * - * Note, called in nfsfs initialise when mount is called. - * - * @retval 0 on success, -1 on failure - */ -int -rpcUdpInit(void); - -/** - * @brief RPC cleanup and stop. - * - * @retval 0 on success, nonzero if still in use - */ -int -rpcUdpCleanup(void); - -/** NFS driver interface */ - -/** - * @brief Initialize the NFS driver. - * - * The RPCIO driver must have been initialized prior to calling this. - * - * Note, called in nfsfs initialise when mount is called with defaults. - * - * ARGS: depth of the small and big - * transaction pools, i.e. how - * many transactions (buffers) - * should always be kept around. - * - * (If more transactions are needed, - * they are created and destroyed - * on the fly). - * - * Supply zero values to have the - * driver chose reasonable defaults. - * - * @retval 0 Successful operation. - * @retval -1 An error occurred. The errno is set to indicate the error. - */ -int -nfsInit(int smallPoolDepth, int bigPoolDepth); - -/** - * @brief Driver cleanup code. - * - * @retval 0 on success, nonzero if still in use - */ -int -nfsCleanup(void); - -/** - * @brief Dump a list of the currently mounted NFS to a file. - * - * Dump a list of the currently mounted NFS to a file - * (stdout is used in case f==NULL) - */ -int -nfsMountsShow(FILE *f); - -/** - * @brief Filesystem mount table mount handler. - * - * Filesystem mount table mount handler. Do not call, use the mount call. - */ -int -rtems_nfs_initialize(rtems_filesystem_mount_table_entry_t *mt_entry, - const void *data); - -/** - * @brief A utility routine to find the path leading to a - * rtems_filesystem_location_info_t node. - * - * This should really be present in libcsupport... - * - * @param[in] 'loc' and a buffer 'buf' (length 'len') to hold the path. - * - * @param[out] path copied into 'buf' - * - * @retval 0 on success, RTEMS error code on error. - */ -rtems_status_code -rtems_filesystem_resolve_location(char *buf, int len, rtems_filesystem_location_info_t *loc); - -/** - * @brief Set the timeout (initial default: 10s) for NFS and mount calls. - * - * Set the timeout (initial default: 10s) for NFS and mount calls. - * - * @retval 0 on success, nonzero if the requested timeout is less than - * a clock tick or if the system clock rate cannot be determined. - */ - -int -nfsSetTimeout(uint32_t timeout_ms); - -/** Read current timeout (in milliseconds) */ -uint32_t -nfsGetTimeout(void); - -#ifdef __cplusplus -} -#endif - -/** @} */ -#endif |