/** ****************************************************************************** * @file stm32h7xx_hal_dfsdm.c * @author MCD Application Team * @brief This file provides firmware functions to manage the following * functionalities of the Digital Filter for Sigma-Delta Modulators * (DFSDM) peripherals: * + Initialization and configuration of channels and filters * + Regular channels configuration * + Injected channels configuration * + Regular/Injected Channels DMA Configuration * + Interrupts and flags management * + Analog watchdog feature * + Short-circuit detector feature * + Extremes detector feature * + Clock absence detector feature * + Break generation on analog watchdog or short-circuit event * @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] *** Channel initialization *** ============================== [..] (#) User has first to initialize channels (before filters initialization). (#) As prerequisite, fill in the HAL_DFSDM_ChannelMspInit() : (++) Enable DFSDMz clock interface with __HAL_RCC_DFSDMz_CLK_ENABLE(). (++) Enable the clocks for the DFSDMz GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE(). (++) Configure these DFSDMz pins in alternate mode using HAL_GPIO_Init(). (++) If interrupt mode is used, enable and configure DFSDMz_FLT0 global interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). (#) Configure the output clock, input, serial interface, analog watchdog, offset and data right bit shift parameters for this channel using the HAL_DFSDM_ChannelInit() function. *** Channel clock absence detector *** ====================================== [..] (#) Start clock absence detector using HAL_DFSDM_ChannelCkabStart() or HAL_DFSDM_ChannelCkabStart_IT(). (#) In polling mode, use HAL_DFSDM_ChannelPollForCkab() to detect the clock absence. (#) In interrupt mode, HAL_DFSDM_ChannelCkabCallback() will be called if clock absence is detected. (#) Stop clock absence detector using HAL_DFSDM_ChannelCkabStop() or HAL_DFSDM_ChannelCkabStop_IT(). (#) Please note that the same mode (polling or interrupt) has to be used for all channels because the channels are sharing the same interrupt. (#) Please note also that in interrupt mode, if clock absence detector is stopped for one channel, interrupt will be disabled for all channels. *** Channel short circuit detector *** ====================================== [..] (#) Start short circuit detector using HAL_DFSDM_ChannelScdStart() or or HAL_DFSDM_ChannelScdStart_IT(). (#) In polling mode, use HAL_DFSDM_ChannelPollForScd() to detect short circuit. (#) In interrupt mode, HAL_DFSDM_ChannelScdCallback() will be called if short circuit is detected. (#) Stop short circuit detector using HAL_DFSDM_ChannelScdStop() or or HAL_DFSDM_ChannelScdStop_IT(). (#) Please note that the same mode (polling or interrupt) has to be used for all channels because the channels are sharing the same interrupt. (#) Please note also that in interrupt mode, if short circuit detector is stopped for one channel, interrupt will be disabled for all channels. *** Channel analog watchdog value *** ===================================== [..] (#) Get analog watchdog filter value of a channel using HAL_DFSDM_ChannelGetAwdValue(). *** Channel offset value *** ===================================== [..] (#) Modify offset value of a channel using HAL_DFSDM_ChannelModifyOffset(). *** Filter initialization *** ============================= [..] (#) After channel initialization, user has to init filters. (#) As prerequisite, fill in the HAL_DFSDM_FilterMspInit() : (++) If interrupt mode is used , enable and configure DFSDMz_FLTx global interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ(). Please note that DFSDMz_FLT0 global interrupt could be already enabled if interrupt is used for channel. (++) If DMA mode is used, configure DMA with HAL_DMA_Init() and link it with DFSDMz filter handle using __HAL_LINKDMA(). (#) Configure the regular conversion, injected conversion and filter parameters for this filter using the HAL_DFSDM_FilterInit() function. *** Filter regular channel conversion *** ========================================= [..] (#) Select regular channel and enable/disable continuous mode using HAL_DFSDM_FilterConfigRegChannel(). (#) Start regular conversion using HAL_DFSDM_FilterRegularStart(), HAL_DFSDM_FilterRegularStart_IT(), HAL_DFSDM_FilterRegularStart_DMA() or HAL_DFSDM_FilterRegularMsbStart_DMA(). (#) In polling mode, use HAL_DFSDM_FilterPollForRegConversion() to detect the end of regular conversion. (#) In interrupt mode, HAL_DFSDM_FilterRegConvCpltCallback() will be called at the end of regular conversion. (#) Get value of regular conversion and corresponding channel using HAL_DFSDM_FilterGetRegularValue(). (#) In DMA mode, HAL_DFSDM_FilterRegConvHalfCpltCallback() and HAL_DFSDM_FilterRegConvCpltCallback() will be called respectively at the half transfer and at the transfer complete. Please note that HAL_DFSDM_FilterRegConvHalfCpltCallback() will be called only in DMA circular mode. (#) Stop regular conversion using HAL_DFSDM_FilterRegularStop(), HAL_DFSDM_FilterRegularStop_IT() or HAL_DFSDM_FilterRegularStop_DMA(). *** Filter injected channels conversion *** =========================================== [..] (#) Select injected channels using HAL_DFSDM_FilterConfigInjChannel(). (#) Start injected conversion using HAL_DFSDM_FilterInjectedStart(), HAL_DFSDM_FilterInjectedStart_IT(), HAL_DFSDM_FilterInjectedStart_DMA() or HAL_DFSDM_FilterInjectedMsbStart_DMA(). (#) In polling mode, use HAL_DFSDM_FilterPollForInjConversion() to detect the end of injected conversion. (#) In interrupt mode, HAL_DFSDM_FilterInjConvCpltCallback() will be called at the end of injected conversion. (#) Get value of injected conversion and corresponding channel using HAL_DFSDM_FilterGetInjectedValue(). (#) In DMA mode, HAL_DFSDM_FilterInjConvHalfCpltCallback() and HAL_DFSDM_FilterInjConvCpltCallback() will be called respectively at the half transfer and at the transfer complete. Please note that HAL_DFSDM_FilterInjConvCpltCallback() will be called only in DMA circular mode. (#) Stop injected conversion using HAL_DFSDM_FilterInjectedStop(), HAL_DFSDM_FilterInjectedStop_IT() or HAL_DFSDM_FilterInjectedStop_DMA(). *** Filter analog watchdog *** ============================== [..] (#) Start filter analog watchdog using HAL_DFSDM_FilterAwdStart_IT(). (#) HAL_DFSDM_FilterAwdCallback() will be called if analog watchdog occurs. (#) Stop filter analog watchdog using HAL_DFSDM_FilterAwdStop_IT(). *** Filter extreme detector *** =============================== [..] (#) Start filter extreme detector using HAL_DFSDM_FilterExdStart(). (#) Get extreme detector maximum value using HAL_DFSDM_FilterGetExdMaxValue(). (#) Get extreme detector minimum value using HAL_DFSDM_FilterGetExdMinValue(). (#) Start filter extreme detector using HAL_DFSDM_FilterExdStop(). *** Filter conversion time *** ============================== [..] (#) Get conversion time value using HAL_DFSDM_FilterGetConvTimeValue(). *** Callback registration *** ============================= [..] The compilation define USE_HAL_DFSDM_REGISTER_CALLBACKS when set to 1 allows the user to configure dynamically the driver callbacks. Use functions HAL_DFSDM_Channel_RegisterCallback(), HAL_DFSDM_Filter_RegisterCallback() or HAL_DFSDM_Filter_RegisterAwdCallback() to register a user callback. [..] Function HAL_DFSDM_Channel_RegisterCallback() allows to register following callbacks: (+) CkabCallback : DFSDM channel clock absence detection callback. (+) ScdCallback : DFSDM channel short circuit detection callback. (+) MspInitCallback : DFSDM channel MSP init callback. (+) MspDeInitCallback : DFSDM channel MSP de-init callback. [..] This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. [..] Function HAL_DFSDM_Filter_RegisterCallback() allows to register following callbacks: (+) RegConvCpltCallback : DFSDM filter regular conversion complete callback. (+) RegConvHalfCpltCallback : DFSDM filter half regular conversion complete callback. (+) InjConvCpltCallback : DFSDM filter injected conversion complete callback. (+) InjConvHalfCpltCallback : DFSDM filter half injected conversion complete callback. (+) ErrorCallback : DFSDM filter error callback. (+) MspInitCallback : DFSDM filter MSP init callback. (+) MspDeInitCallback : DFSDM filter MSP de-init callback. [..] This function takes as parameters the HAL peripheral handle, the Callback ID and a pointer to the user callback function. [..] For specific DFSDM filter analog watchdog callback use dedicated register callback: HAL_DFSDM_Filter_RegisterAwdCallback(). [..] Use functions HAL_DFSDM_Channel_UnRegisterCallback() or HAL_DFSDM_Filter_UnRegisterCallback() to reset a callback to the default weak function. [..] HAL_DFSDM_Channel_UnRegisterCallback() takes as parameters the HAL peripheral handle, and the Callback ID. [..] This function allows to reset following callbacks: (+) CkabCallback : DFSDM channel clock absence detection callback. (+) ScdCallback : DFSDM channel short circuit detection callback. (+) MspInitCallback : DFSDM channel MSP init callback. (+) MspDeInitCallback : DFSDM channel MSP de-init callback. [..] HAL_DFSDM_Filter_UnRegisterCallback() takes as parameters the HAL peripheral handle, and the Callback ID. [..] This function allows to reset following callbacks: (+) RegConvCpltCallback : DFSDM filter regular conversion complete callback. (+) RegConvHalfCpltCallback : DFSDM filter half regular conversion complete callback. (+) InjConvCpltCallback : DFSDM filter injected conversion complete callback. (+) InjConvHalfCpltCallback : DFSDM filter half injected conversion complete callback. (+) ErrorCallback : DFSDM filter error callback. (+) MspInitCallback : DFSDM filter MSP init callback. (+) MspDeInitCallback : DFSDM filter MSP de-init callback. [..] For specific DFSDM filter analog watchdog callback use dedicated unregister callback: HAL_DFSDM_Filter_UnRegisterAwdCallback(). [..] By default, after the call of init function and if the state is RESET all callbacks are reset to the corresponding legacy weak functions: examples HAL_DFSDM_ChannelScdCallback(), HAL_DFSDM_FilterErrorCallback(). Exception done for MspInit and MspDeInit callbacks that are respectively reset to the legacy weak functions in the init and de-init only when these callbacks are null (not registered beforehand). If not, MspInit or MspDeInit are not null, the init and de-init keep and use the user MspInit/MspDeInit callbacks (registered beforehand) [..] Callbacks can be registered/unregistered in READY state only. Exception done for MspInit/MspDeInit callbacks that can be registered/unregistered in READY or RESET state, thus registered (user) MspInit/DeInit callbacks can be used during the init/de-init. In that case first register the MspInit/MspDeInit user callbacks using HAL_DFSDM_Channel_RegisterCallback() or HAL_DFSDM_Filter_RegisterCallback() before calling init or de-init function. [..] When The compilation define USE_HAL_DFSDM_REGISTER_CALLBACKS is set to 0 or not defined, the callback registering feature is not available and weak callbacks are used. @endverbatim ****************************************************************************** * @attention * *

© Copyright (c) 2017 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32h7xx_hal.h" /** @addtogroup STM32H7xx_HAL_Driver * @{ */ #ifdef HAL_DFSDM_MODULE_ENABLED /** @defgroup DFSDM DFSDM * @brief DFSDM HAL driver module * @{ */ /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /** @defgroup DFSDM_Private_Define DFSDM Private Define * @{ */ #define DFSDM_FLTCR1_MSB_RCH_OFFSET 8 #define DFSDM_MSB_MASK 0xFFFF0000U #define DFSDM_LSB_MASK 0x0000FFFFU #define DFSDM_CKAB_TIMEOUT 5000U #define DFSDM1_CHANNEL_NUMBER 8U #if defined(DFSDM2_Channel0) #define DFSDM2_CHANNEL_NUMBER 2U #endif /* DFSDM2_Channel0 */ /** * @} */ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /** @defgroup DFSDM_Private_Variables DFSDM Private Variables * @{ */ static __IO uint32_t v_dfsdm1ChannelCounter = 0; static DFSDM_Channel_HandleTypeDef *a_dfsdm1ChannelHandle[DFSDM1_CHANNEL_NUMBER] = {NULL}; #if defined(DFSDM2_Channel0) static __IO uint32_t v_dfsdm2ChannelCounter = 0; static DFSDM_Channel_HandleTypeDef *a_dfsdm2ChannelHandle[DFSDM2_CHANNEL_NUMBER] = {NULL}; #endif /* DFSDM2_Channel0 */ /** * @} */ /* Private function prototypes -----------------------------------------------*/ /** @defgroup DFSDM_Private_Functions DFSDM Private Functions * @{ */ static uint32_t DFSDM_GetInjChannelsNbr(uint32_t Channels); static uint32_t DFSDM_GetChannelFromInstance(const DFSDM_Channel_TypeDef *Instance); static void DFSDM_RegConvStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); static void DFSDM_RegConvStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); static void DFSDM_InjConvStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); static void DFSDM_InjConvStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter); static void DFSDM_DMARegularHalfConvCplt(DMA_HandleTypeDef *hdma); static void DFSDM_DMARegularConvCplt(DMA_HandleTypeDef *hdma); static void DFSDM_DMAInjectedHalfConvCplt(DMA_HandleTypeDef *hdma); static void DFSDM_DMAInjectedConvCplt(DMA_HandleTypeDef *hdma); static void DFSDM_DMAError(DMA_HandleTypeDef *hdma); /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup DFSDM_Exported_Functions DFSDM Exported Functions * @{ */ /** @defgroup DFSDM_Exported_Functions_Group1_Channel Channel initialization and de-initialization functions * @brief Channel initialization and de-initialization functions * @verbatim ============================================================================== ##### Channel initialization and de-initialization functions ##### ============================================================================== [..] This section provides functions allowing to: (+) Initialize the DFSDM channel. (+) De-initialize the DFSDM channel. @endverbatim * @{ */ /** * @brief Initialize the DFSDM channel according to the specified parameters * in the DFSDM_ChannelInitTypeDef structure and initialize the associated handle. * @param hdfsdm_channel DFSDM channel handle. * @retval HAL status. */ HAL_StatusTypeDef HAL_DFSDM_ChannelInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { __IO uint32_t *channelCounterPtr; DFSDM_Channel_HandleTypeDef **channelHandleTable; DFSDM_Channel_TypeDef *channel0Instance; /* Check DFSDM Channel handle */ if(hdfsdm_channel == NULL) { return HAL_ERROR; } /* Check parameters */ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); assert_param(IS_FUNCTIONAL_STATE(hdfsdm_channel->Init.OutputClock.Activation)); assert_param(IS_DFSDM_CHANNEL_INPUT(hdfsdm_channel->Init.Input.Multiplexer)); assert_param(IS_DFSDM_CHANNEL_DATA_PACKING(hdfsdm_channel->Init.Input.DataPacking)); assert_param(IS_DFSDM_CHANNEL_INPUT_PINS(hdfsdm_channel->Init.Input.Pins)); assert_param(IS_DFSDM_CHANNEL_SERIAL_INTERFACE_TYPE(hdfsdm_channel->Init.SerialInterface.Type)); assert_param(IS_DFSDM_CHANNEL_SPI_CLOCK(hdfsdm_channel->Init.SerialInterface.SpiClock)); assert_param(IS_DFSDM_CHANNEL_FILTER_ORDER(hdfsdm_channel->Init.Awd.FilterOrder)); assert_param(IS_DFSDM_CHANNEL_FILTER_OVS_RATIO(hdfsdm_channel->Init.Awd.Oversampling)); assert_param(IS_DFSDM_CHANNEL_OFFSET(hdfsdm_channel->Init.Offset)); assert_param(IS_DFSDM_CHANNEL_RIGHT_BIT_SHIFT(hdfsdm_channel->Init.RightBitShift)); #if defined(DFSDM2_Channel0) if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) { channelCounterPtr = &v_dfsdm1ChannelCounter; channelHandleTable = a_dfsdm1ChannelHandle; channel0Instance = DFSDM1_Channel0; } else { channelCounterPtr = &v_dfsdm2ChannelCounter; channelHandleTable = a_dfsdm2ChannelHandle; channel0Instance = DFSDM2_Channel0; } #else /* DFSDM2_Channel0 */ channelCounterPtr = &v_dfsdm1ChannelCounter; channelHandleTable = a_dfsdm1ChannelHandle; channel0Instance = DFSDM1_Channel0; #endif /* DFSDM2_Channel0 */ /* Check that channel has not been already initialized */ if (channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] != NULL) { return HAL_ERROR; } #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) /* Reset callback pointers to the weak predefined callbacks */ hdfsdm_channel->CkabCallback = HAL_DFSDM_ChannelCkabCallback; hdfsdm_channel->ScdCallback = HAL_DFSDM_ChannelScdCallback; /* Call MSP init function */ if(hdfsdm_channel->MspInitCallback == NULL) { hdfsdm_channel->MspInitCallback = HAL_DFSDM_ChannelMspInit; } hdfsdm_channel->MspInitCallback(hdfsdm_channel); #else /* Call MSP init function */ HAL_DFSDM_ChannelMspInit(hdfsdm_channel); #endif /* Update the channel counter */ (*channelCounterPtr)++; /* Configure output serial clock and enable global DFSDM interface only for first channel */ if(*channelCounterPtr == 1U) { assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK(hdfsdm_channel->Init.OutputClock.Selection)); /* Set the output serial clock source */ channel0Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTSRC); channel0Instance->CHCFGR1 |= hdfsdm_channel->Init.OutputClock.Selection; /* Reset clock divider */ channel0Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKOUTDIV); if(hdfsdm_channel->Init.OutputClock.Activation == ENABLE) { assert_param(IS_DFSDM_CHANNEL_OUTPUT_CLOCK_DIVIDER(hdfsdm_channel->Init.OutputClock.Divider)); /* Set the output clock divider */ channel0Instance->CHCFGR1 |= (uint32_t)((hdfsdm_channel->Init.OutputClock.Divider - 1U) << DFSDM_CHCFGR1_CKOUTDIV_Pos); } /* enable the DFSDM global interface */ channel0Instance->CHCFGR1 |= DFSDM_CHCFGR1_DFSDMEN; } /* Set channel input parameters */ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_DATPACK | DFSDM_CHCFGR1_DATMPX | DFSDM_CHCFGR1_CHINSEL); hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.Input.Multiplexer | hdfsdm_channel->Init.Input.DataPacking | hdfsdm_channel->Init.Input.Pins); /* Set serial interface parameters */ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SITP | DFSDM_CHCFGR1_SPICKSEL); hdfsdm_channel->Instance->CHCFGR1 |= (hdfsdm_channel->Init.SerialInterface.Type | hdfsdm_channel->Init.SerialInterface.SpiClock); /* Set analog watchdog parameters */ hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_AWFORD | DFSDM_CHAWSCDR_AWFOSR); hdfsdm_channel->Instance->CHAWSCDR |= (hdfsdm_channel->Init.Awd.FilterOrder | ((hdfsdm_channel->Init.Awd.Oversampling - 1U) << DFSDM_CHAWSCDR_AWFOSR_Pos)); /* Set channel offset and right bit shift */ hdfsdm_channel->Instance->CHCFGR2 &= ~(DFSDM_CHCFGR2_OFFSET | DFSDM_CHCFGR2_DTRBS); hdfsdm_channel->Instance->CHCFGR2 |= (((uint32_t) hdfsdm_channel->Init.Offset << DFSDM_CHCFGR2_OFFSET_Pos) | (hdfsdm_channel->Init.RightBitShift << DFSDM_CHCFGR2_DTRBS_Pos)); /* Enable DFSDM channel */ hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CHEN; /* Set DFSDM Channel to ready state */ hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_READY; /* Store channel handle in DFSDM channel handle table */ channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] = hdfsdm_channel; return HAL_OK; } /** * @brief De-initialize the DFSDM channel. * @param hdfsdm_channel DFSDM channel handle. * @retval HAL status. */ HAL_StatusTypeDef HAL_DFSDM_ChannelDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { __IO uint32_t *channelCounterPtr; DFSDM_Channel_HandleTypeDef **channelHandleTable; DFSDM_Channel_TypeDef *channel0Instance; /* Check DFSDM Channel handle */ if(hdfsdm_channel == NULL) { return HAL_ERROR; } /* Check parameters */ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); #if defined(DFSDM2_Channel0) if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) { channelCounterPtr = &v_dfsdm1ChannelCounter; channelHandleTable = a_dfsdm1ChannelHandle; channel0Instance = DFSDM1_Channel0; } else { channelCounterPtr = &v_dfsdm2ChannelCounter; channelHandleTable = a_dfsdm2ChannelHandle; channel0Instance = DFSDM2_Channel0; } #else /* DFSDM2_Channel0 */ channelCounterPtr = &v_dfsdm1ChannelCounter; channelHandleTable = a_dfsdm1ChannelHandle; channel0Instance = DFSDM1_Channel0; #endif /* DFSDM2_Channel0 */ /* Check that channel has not been already deinitialized */ if (channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] == NULL) { return HAL_ERROR; } /* Disable the DFSDM channel */ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CHEN); /* Update the channel counter */ (*channelCounterPtr)--; /* Disable global DFSDM at deinit of last channel */ if (*channelCounterPtr == 0U) { channel0Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_DFSDMEN); } /* Call MSP deinit function */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) if(hdfsdm_channel->MspDeInitCallback == NULL) { hdfsdm_channel->MspDeInitCallback = HAL_DFSDM_ChannelMspDeInit; } hdfsdm_channel->MspDeInitCallback(hdfsdm_channel); #else HAL_DFSDM_ChannelMspDeInit(hdfsdm_channel); #endif /* Set DFSDM Channel in reset state */ hdfsdm_channel->State = HAL_DFSDM_CHANNEL_STATE_RESET; /* Reset channel handle in DFSDM channel handle table */ channelHandleTable[DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance)] = (DFSDM_Channel_HandleTypeDef *) NULL; return HAL_OK; } /** * @brief Initialize the DFSDM channel MSP. * @param hdfsdm_channel DFSDM channel handle. * @retval None */ __weak void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdfsdm_channel); /* NOTE : This function should not be modified, when the function is needed, the HAL_DFSDM_ChannelMspInit could be implemented in the user file. */ } /** * @brief De-initialize the DFSDM channel MSP. * @param hdfsdm_channel DFSDM channel handle. * @retval None */ __weak void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdfsdm_channel); /* NOTE : This function should not be modified, when the function is needed, the HAL_DFSDM_ChannelMspDeInit could be implemented in the user file. */ } #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) /** * @brief Register a user DFSDM channel callback * to be used instead of the weak predefined callback. * @param hdfsdm_channel DFSDM channel handle. * @param CallbackID ID of the callback to be registered. * This parameter can be one of the following values: * @arg @ref HAL_DFSDM_CHANNEL_CKAB_CB_ID clock absence detection callback ID. * @arg @ref HAL_DFSDM_CHANNEL_SCD_CB_ID short circuit detection callback ID. * @arg @ref HAL_DFSDM_CHANNEL_MSPINIT_CB_ID MSP init callback ID. * @arg @ref HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID MSP de-init callback ID. * @param pCallback pointer to the callback function. * @retval HAL status. */ HAL_StatusTypeDef HAL_DFSDM_Channel_RegisterCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, HAL_DFSDM_Channel_CallbackIDTypeDef CallbackID, pDFSDM_Channel_CallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; if(pCallback == NULL) { /* update return status */ status = HAL_ERROR; } else { if(HAL_DFSDM_CHANNEL_STATE_READY == hdfsdm_channel->State) { switch (CallbackID) { case HAL_DFSDM_CHANNEL_CKAB_CB_ID : hdfsdm_channel->CkabCallback = pCallback; break; case HAL_DFSDM_CHANNEL_SCD_CB_ID : hdfsdm_channel->ScdCallback = pCallback; break; case HAL_DFSDM_CHANNEL_MSPINIT_CB_ID : hdfsdm_channel->MspInitCallback = pCallback; break; case HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID : hdfsdm_channel->MspDeInitCallback = pCallback; break; default : /* update return status */ status = HAL_ERROR; break; } } else if(HAL_DFSDM_CHANNEL_STATE_RESET == hdfsdm_channel->State) { switch (CallbackID) { case HAL_DFSDM_CHANNEL_MSPINIT_CB_ID : hdfsdm_channel->MspInitCallback = pCallback; break; case HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID : hdfsdm_channel->MspDeInitCallback = pCallback; break; default : /* update return status */ status = HAL_ERROR; break; } } else { /* update return status */ status = HAL_ERROR; } } return status; } /** * @brief Unregister a user DFSDM channel callback. * DFSDM channel callback is redirected to the weak predefined callback. * @param hdfsdm_channel DFSDM channel handle. * @param CallbackID ID of the callback to be unregistered. * This parameter can be one of the following values: * @arg @ref HAL_DFSDM_CHANNEL_CKAB_CB_ID clock absence detection callback ID. * @arg @ref HAL_DFSDM_CHANNEL_SCD_CB_ID short circuit detection callback ID. * @arg @ref HAL_DFSDM_CHANNEL_MSPINIT_CB_ID MSP init callback ID. * @arg @ref HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID MSP de-init callback ID. * @retval HAL status. */ HAL_StatusTypeDef HAL_DFSDM_Channel_UnRegisterCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, HAL_DFSDM_Channel_CallbackIDTypeDef CallbackID) { HAL_StatusTypeDef status = HAL_OK; if(HAL_DFSDM_CHANNEL_STATE_READY == hdfsdm_channel->State) { switch (CallbackID) { case HAL_DFSDM_CHANNEL_CKAB_CB_ID : hdfsdm_channel->CkabCallback = HAL_DFSDM_ChannelCkabCallback; break; case HAL_DFSDM_CHANNEL_SCD_CB_ID : hdfsdm_channel->ScdCallback = HAL_DFSDM_ChannelScdCallback; break; case HAL_DFSDM_CHANNEL_MSPINIT_CB_ID : hdfsdm_channel->MspInitCallback = HAL_DFSDM_ChannelMspInit; break; case HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID : hdfsdm_channel->MspDeInitCallback = HAL_DFSDM_ChannelMspDeInit; break; default : /* update return status */ status = HAL_ERROR; break; } } else if(HAL_DFSDM_CHANNEL_STATE_RESET == hdfsdm_channel->State) { switch (CallbackID) { case HAL_DFSDM_CHANNEL_MSPINIT_CB_ID : hdfsdm_channel->MspInitCallback = HAL_DFSDM_ChannelMspInit; break; case HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID : hdfsdm_channel->MspDeInitCallback = HAL_DFSDM_ChannelMspDeInit; break; default : /* update return status */ status = HAL_ERROR; break; } } else { /* update return status */ status = HAL_ERROR; } return status; } #endif /* USE_HAL_DFSDM_REGISTER_CALLBACKS */ /** * @} */ /** @defgroup DFSDM_Exported_Functions_Group2_Channel Channel operation functions * @brief Channel operation functions * @verbatim ============================================================================== ##### Channel operation functions ##### ============================================================================== [..] This section provides functions allowing to: (+) Manage clock absence detector feature. (+) Manage short circuit detector feature. (+) Get analog watchdog value. (+) Modify offset value. @endverbatim * @{ */ /** * @brief This function allows to start clock absence detection in polling mode. * @note Same mode has to be used for all channels. * @note If clock is not available on this channel during 5 seconds, * clock absence detection will not be activated and function * will return HAL_TIMEOUT error. * @param hdfsdm_channel DFSDM channel handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { HAL_StatusTypeDef status = HAL_OK; uint32_t channel; uint32_t tickstart; DFSDM_Filter_TypeDef *filter0Instance; /* Check parameters */ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); #if defined(DFSDM2_Channel0) if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) { filter0Instance = DFSDM1_Filter0; } else { filter0Instance = DFSDM2_Filter0; } #else /* DFSDM2_Channel0 */ filter0Instance = DFSDM1_Filter0; #endif /* DFSDM2_Channel0 */ /* Check DFSDM channel state */ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) { /* Return error status */ status = HAL_ERROR; } else { /* Get channel number from channel instance */ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); /* Get timeout */ tickstart = HAL_GetTick(); /* Clear clock absence flag */ while ((((filter0Instance->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) != 0U) { filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); /* Check the Timeout */ if((HAL_GetTick()-tickstart) > DFSDM_CKAB_TIMEOUT) { /* Set timeout status */ status = HAL_TIMEOUT; break; } } if(status == HAL_OK) { /* Start clock absence detection */ hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CKABEN; } } /* Return function status */ return status; } /** * @brief This function allows to poll for the clock absence detection. * @param hdfsdm_channel DFSDM channel handle. * @param Timeout Timeout value in milliseconds. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_ChannelPollForCkab(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Timeout) { uint32_t tickstart; uint32_t channel; DFSDM_Filter_TypeDef *filter0Instance; /* Check parameters */ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); #if defined(DFSDM2_Channel0) if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) { filter0Instance = DFSDM1_Filter0; } else { filter0Instance = DFSDM2_Filter0; } #else /* DFSDM2_Channel0 */ filter0Instance = DFSDM1_Filter0; #endif /* DFSDM2_Channel0 */ /* Check DFSDM channel state */ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) { /* Return error status */ return HAL_ERROR; } else { /* Get channel number from channel instance */ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); /* Get timeout */ tickstart = HAL_GetTick(); /* Wait clock absence detection */ while ((((filter0Instance->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) == 0U) { /* Check the Timeout */ if(Timeout != HAL_MAX_DELAY) { if(((HAL_GetTick()-tickstart) > Timeout) || (Timeout == 0U)) { /* Return timeout status */ return HAL_TIMEOUT; } } } /* Clear clock absence detection flag */ filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); /* Return function status */ return HAL_OK; } } /** * @brief This function allows to stop clock absence detection in polling mode. * @param hdfsdm_channel DFSDM channel handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { HAL_StatusTypeDef status = HAL_OK; uint32_t channel; DFSDM_Filter_TypeDef *filter0Instance; /* Check parameters */ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); #if defined(DFSDM2_Channel0) if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) { filter0Instance = DFSDM1_Filter0; } else { filter0Instance = DFSDM2_Filter0; } #else /* DFSDM2_Channel0 */ filter0Instance = DFSDM1_Filter0; #endif /* DFSDM2_Channel0 */ /* Check DFSDM channel state */ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) { /* Return error status */ status = HAL_ERROR; } else { /* Stop clock absence detection */ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN); /* Clear clock absence flag */ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); } /* Return function status */ return status; } /** * @brief This function allows to start clock absence detection in interrupt mode. * @note Same mode has to be used for all channels. * @note If clock is not available on this channel during 5 seconds, * clock absence detection will not be activated and function * will return HAL_TIMEOUT error. * @param hdfsdm_channel DFSDM channel handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { HAL_StatusTypeDef status = HAL_OK; uint32_t channel; uint32_t tickstart; DFSDM_Filter_TypeDef *filter0Instance; /* Check parameters */ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); #if defined(DFSDM2_Channel0) if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) { filter0Instance = DFSDM1_Filter0; } else { filter0Instance = DFSDM2_Filter0; } #else /* DFSDM2_Channel0 */ filter0Instance = DFSDM1_Filter0; #endif /* DFSDM2_Channel0 */ /* Check DFSDM channel state */ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) { /* Return error status */ status = HAL_ERROR; } else { /* Get channel number from channel instance */ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); /* Get timeout */ tickstart = HAL_GetTick(); /* Clear clock absence flag */ while ((((filter0Instance->FLTISR & DFSDM_FLTISR_CKABF) >> (DFSDM_FLTISR_CKABF_Pos + channel)) & 1U) != 0U) { filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); /* Check the Timeout */ if((HAL_GetTick()-tickstart) > DFSDM_CKAB_TIMEOUT) { /* Set timeout status */ status = HAL_TIMEOUT; break; } } if(status == HAL_OK) { /* Activate clock absence detection interrupt */ filter0Instance->FLTCR2 |= DFSDM_FLTCR2_CKABIE; /* Start clock absence detection */ hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_CKABEN; } } /* Return function status */ return status; } /** * @brief Clock absence detection callback. * @param hdfsdm_channel DFSDM channel handle. * @retval None */ __weak void HAL_DFSDM_ChannelCkabCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdfsdm_channel); /* NOTE : This function should not be modified, when the callback is needed, the HAL_DFSDM_ChannelCkabCallback could be implemented in the user file */ } /** * @brief This function allows to stop clock absence detection in interrupt mode. * @note Interrupt will be disabled for all channels * @param hdfsdm_channel DFSDM channel handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { HAL_StatusTypeDef status = HAL_OK; uint32_t channel; DFSDM_Filter_TypeDef *filter0Instance; /* Check parameters */ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); #if defined(DFSDM2_Channel0) if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) { filter0Instance = DFSDM1_Filter0; } else { filter0Instance = DFSDM2_Filter0; } #else /* DFSDM2_Channel0 */ filter0Instance = DFSDM1_Filter0; #endif /* DFSDM2_Channel0 */ /* Check DFSDM channel state */ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) { /* Return error status */ status = HAL_ERROR; } else { /* Stop clock absence detection */ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_CKABEN); /* Clear clock absence flag */ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); /* Disable clock absence detection interrupt */ filter0Instance->FLTCR2 &= ~(DFSDM_FLTCR2_CKABIE); } /* Return function status */ return status; } /** * @brief This function allows to start short circuit detection in polling mode. * @note Same mode has to be used for all channels * @param hdfsdm_channel DFSDM channel handle. * @param Threshold Short circuit detector threshold. * This parameter must be a number between Min_Data = 0 and Max_Data = 255. * @param BreakSignal Break signals assigned to short circuit event. * This parameter can be a values combination of @ref DFSDM_BreakSignals. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Threshold, uint32_t BreakSignal) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); assert_param(IS_DFSDM_CHANNEL_SCD_THRESHOLD(Threshold)); assert_param(IS_DFSDM_BREAK_SIGNALS(BreakSignal)); /* Check DFSDM channel state */ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) { /* Return error status */ status = HAL_ERROR; } else { /* Configure threshold and break signals */ hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_BKSCD | DFSDM_CHAWSCDR_SCDT); hdfsdm_channel->Instance->CHAWSCDR |= ((BreakSignal << DFSDM_CHAWSCDR_BKSCD_Pos) | \ Threshold); /* Start short circuit detection */ hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_SCDEN; } /* Return function status */ return status; } /** * @brief This function allows to poll for the short circuit detection. * @param hdfsdm_channel DFSDM channel handle. * @param Timeout Timeout value in milliseconds. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_ChannelPollForScd(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Timeout) { uint32_t tickstart; uint32_t channel; DFSDM_Filter_TypeDef *filter0Instance; /* Check parameters */ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); #if defined(DFSDM2_Channel0) if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) { filter0Instance = DFSDM1_Filter0; } else { filter0Instance = DFSDM2_Filter0; } #else /* DFSDM2_Channel0 */ filter0Instance = DFSDM1_Filter0; #endif /* DFSDM2_Channel0 */ /* Check DFSDM channel state */ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) { /* Return error status */ return HAL_ERROR; } else { /* Get channel number from channel instance */ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); /* Get timeout */ tickstart = HAL_GetTick(); /* Wait short circuit detection */ while (((filter0Instance->FLTISR & DFSDM_FLTISR_SCDF) >> (DFSDM_FLTISR_SCDF_Pos + channel)) == 0U) { /* Check the Timeout */ if(Timeout != HAL_MAX_DELAY) { if(((HAL_GetTick()-tickstart) > Timeout) || (Timeout == 0U)) { /* Return timeout status */ return HAL_TIMEOUT; } } } /* Clear short circuit detection flag */ filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); /* Return function status */ return HAL_OK; } } /** * @brief This function allows to stop short circuit detection in polling mode. * @param hdfsdm_channel DFSDM channel handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { HAL_StatusTypeDef status = HAL_OK; uint32_t channel; DFSDM_Filter_TypeDef *filter0Instance; /* Check parameters */ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); #if defined(DFSDM2_Channel0) if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) { filter0Instance = DFSDM1_Filter0; } else { filter0Instance = DFSDM2_Filter0; } #else /* DFSDM2_Channel0 */ filter0Instance = DFSDM1_Filter0; #endif /* DFSDM2_Channel0 */ /* Check DFSDM channel state */ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) { /* Return error status */ status = HAL_ERROR; } else { /* Stop short circuit detection */ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SCDEN); /* Clear short circuit detection flag */ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); } /* Return function status */ return status; } /** * @brief This function allows to start short circuit detection in interrupt mode. * @note Same mode has to be used for all channels * @param hdfsdm_channel DFSDM channel handle. * @param Threshold Short circuit detector threshold. * This parameter must be a number between Min_Data = 0 and Max_Data = 255. * @param BreakSignal Break signals assigned to short circuit event. * This parameter can be a values combination of @ref DFSDM_BreakSignals. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Threshold, uint32_t BreakSignal) { HAL_StatusTypeDef status = HAL_OK; DFSDM_Filter_TypeDef *filter0Instance; /* Check parameters */ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); assert_param(IS_DFSDM_CHANNEL_SCD_THRESHOLD(Threshold)); assert_param(IS_DFSDM_BREAK_SIGNALS(BreakSignal)); #if defined(DFSDM2_Channel0) if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) { filter0Instance = DFSDM1_Filter0; } else { filter0Instance = DFSDM2_Filter0; } #else /* DFSDM2_Channel0 */ filter0Instance = DFSDM1_Filter0; #endif /* DFSDM2_Channel0 */ /* Check DFSDM channel state */ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) { /* Return error status */ status = HAL_ERROR; } else { /* Activate short circuit detection interrupt */ filter0Instance->FLTCR2 |= DFSDM_FLTCR2_SCDIE; /* Configure threshold and break signals */ hdfsdm_channel->Instance->CHAWSCDR &= ~(DFSDM_CHAWSCDR_BKSCD | DFSDM_CHAWSCDR_SCDT); hdfsdm_channel->Instance->CHAWSCDR |= ((BreakSignal << DFSDM_CHAWSCDR_BKSCD_Pos) | \ Threshold); /* Start short circuit detection */ hdfsdm_channel->Instance->CHCFGR1 |= DFSDM_CHCFGR1_SCDEN; } /* Return function status */ return status; } /** * @brief Short circuit detection callback. * @param hdfsdm_channel DFSDM channel handle. * @retval None */ __weak void HAL_DFSDM_ChannelScdCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdfsdm_channel); /* NOTE : This function should not be modified, when the callback is needed, the HAL_DFSDM_ChannelScdCallback could be implemented in the user file */ } /** * @brief This function allows to stop short circuit detection in interrupt mode. * @note Interrupt will be disabled for all channels * @param hdfsdm_channel DFSDM channel handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { HAL_StatusTypeDef status = HAL_OK; uint32_t channel; DFSDM_Filter_TypeDef *filter0Instance; /* Check parameters */ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); #if defined(DFSDM2_Channel0) if (IS_DFSDM1_CHANNEL_INSTANCE(hdfsdm_channel->Instance)) { filter0Instance = DFSDM1_Filter0; } else { filter0Instance = DFSDM2_Filter0; } #else /* DFSDM2_Channel0 */ filter0Instance = DFSDM1_Filter0; #endif /* DFSDM2_Channel0 */ /* Check DFSDM channel state */ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) { /* Return error status */ status = HAL_ERROR; } else { /* Stop short circuit detection */ hdfsdm_channel->Instance->CHCFGR1 &= ~(DFSDM_CHCFGR1_SCDEN); /* Clear short circuit detection flag */ channel = DFSDM_GetChannelFromInstance(hdfsdm_channel->Instance); filter0Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); /* Disable short circuit detection interrupt */ filter0Instance->FLTCR2 &= ~(DFSDM_FLTCR2_SCDIE); } /* Return function status */ return status; } /** * @brief This function allows to get channel analog watchdog value. * @param hdfsdm_channel DFSDM channel handle. * @retval Channel analog watchdog value. */ int16_t HAL_DFSDM_ChannelGetAwdValue(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { return (int16_t) hdfsdm_channel->Instance->CHWDATAR; } /** * @brief This function allows to modify channel offset value. * @param hdfsdm_channel DFSDM channel handle. * @param Offset DFSDM channel offset. * This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607. * @retval HAL status. */ HAL_StatusTypeDef HAL_DFSDM_ChannelModifyOffset(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, int32_t Offset) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_CHANNEL_ALL_INSTANCE(hdfsdm_channel->Instance)); assert_param(IS_DFSDM_CHANNEL_OFFSET(Offset)); /* Check DFSDM channel state */ if(hdfsdm_channel->State != HAL_DFSDM_CHANNEL_STATE_READY) { /* Return error status */ status = HAL_ERROR; } else { /* Modify channel offset */ hdfsdm_channel->Instance->CHCFGR2 &= ~(DFSDM_CHCFGR2_OFFSET); hdfsdm_channel->Instance->CHCFGR2 |= ((uint32_t) Offset << DFSDM_CHCFGR2_OFFSET_Pos); } /* Return function status */ return status; } /** * @} */ /** @defgroup DFSDM_Exported_Functions_Group3_Channel Channel state function * @brief Channel state function * @verbatim ============================================================================== ##### Channel state function ##### ============================================================================== [..] This section provides function allowing to: (+) Get channel handle state. @endverbatim * @{ */ /** * @brief This function allows to get the current DFSDM channel handle state. * @param hdfsdm_channel DFSDM channel handle. * @retval DFSDM channel state. */ HAL_DFSDM_Channel_StateTypeDef HAL_DFSDM_ChannelGetState(DFSDM_Channel_HandleTypeDef *hdfsdm_channel) { /* Return DFSDM channel handle state */ return hdfsdm_channel->State; } /** * @} */ /** @defgroup DFSDM_Exported_Functions_Group1_Filter Filter initialization and de-initialization functions * @brief Filter initialization and de-initialization functions * @verbatim ============================================================================== ##### Filter initialization and de-initialization functions ##### ============================================================================== [..] This section provides functions allowing to: (+) Initialize the DFSDM filter. (+) De-initialize the DFSDM filter. @endverbatim * @{ */ /** * @brief Initialize the DFSDM filter according to the specified parameters * in the DFSDM_FilterInitTypeDef structure and initialize the associated handle. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status. */ HAL_StatusTypeDef HAL_DFSDM_FilterInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { const DFSDM_Filter_TypeDef *filter0Instance; /* Check DFSDM Channel handle */ if(hdfsdm_filter == NULL) { return HAL_ERROR; } /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); assert_param(IS_DFSDM_FILTER_REG_TRIGGER(hdfsdm_filter->Init.RegularParam.Trigger)); assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.RegularParam.FastMode)); assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.RegularParam.DmaMode)); assert_param(IS_DFSDM_FILTER_INJ_TRIGGER(hdfsdm_filter->Init.InjectedParam.Trigger)); assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.InjectedParam.ScanMode)); assert_param(IS_FUNCTIONAL_STATE(hdfsdm_filter->Init.InjectedParam.DmaMode)); assert_param(IS_DFSDM_FILTER_SINC_ORDER(hdfsdm_filter->Init.FilterParam.SincOrder)); assert_param(IS_DFSDM_FILTER_OVS_RATIO(hdfsdm_filter->Init.FilterParam.Oversampling)); assert_param(IS_DFSDM_FILTER_INTEGRATOR_OVS_RATIO(hdfsdm_filter->Init.FilterParam.IntOversampling)); #if defined(DFSDM2_Channel0) if (IS_DFSDM1_FILTER_INSTANCE(hdfsdm_filter->Instance)) { filter0Instance = DFSDM1_Filter0; } else { filter0Instance = DFSDM2_Filter0; } #else /* DFSDM2_Channel0 */ filter0Instance = DFSDM1_Filter0; #endif /* DFSDM2_Channel0 */ /* Check parameters compatibility */ if ((hdfsdm_filter->Instance == filter0Instance) && ((hdfsdm_filter->Init.RegularParam.Trigger == DFSDM_FILTER_SYNC_TRIGGER) || (hdfsdm_filter->Init.InjectedParam.Trigger == DFSDM_FILTER_SYNC_TRIGGER))) { return HAL_ERROR; } /* Initialize DFSDM filter variables with default values */ hdfsdm_filter->RegularContMode = DFSDM_CONTINUOUS_CONV_OFF; hdfsdm_filter->InjectedChannelsNbr = 1; hdfsdm_filter->InjConvRemaining = 1; hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_NONE; #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) /* Reset callback pointers to the weak predefined callbacks */ hdfsdm_filter->AwdCallback = HAL_DFSDM_FilterAwdCallback; hdfsdm_filter->RegConvCpltCallback = HAL_DFSDM_FilterRegConvCpltCallback; hdfsdm_filter->RegConvHalfCpltCallback = HAL_DFSDM_FilterRegConvHalfCpltCallback; hdfsdm_filter->InjConvCpltCallback = HAL_DFSDM_FilterInjConvCpltCallback; hdfsdm_filter->InjConvHalfCpltCallback = HAL_DFSDM_FilterInjConvHalfCpltCallback; hdfsdm_filter->ErrorCallback = HAL_DFSDM_FilterErrorCallback; /* Call MSP init function */ if(hdfsdm_filter->MspInitCallback == NULL) { hdfsdm_filter->MspInitCallback = HAL_DFSDM_FilterMspInit; } hdfsdm_filter->MspInitCallback(hdfsdm_filter); #else /* Call MSP init function */ HAL_DFSDM_FilterMspInit(hdfsdm_filter); #endif /* Set regular parameters */ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RSYNC); if(hdfsdm_filter->Init.RegularParam.FastMode == ENABLE) { hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_FAST; } else { hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_FAST); } if(hdfsdm_filter->Init.RegularParam.DmaMode == ENABLE) { hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RDMAEN; } else { hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RDMAEN); } /* Set injected parameters */ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSYNC | DFSDM_FLTCR1_JEXTEN | DFSDM_FLTCR1_JEXTSEL); if(hdfsdm_filter->Init.InjectedParam.Trigger == DFSDM_FILTER_EXT_TRIGGER) { assert_param(IS_DFSDM_FILTER_EXT_TRIG(hdfsdm_filter->Init.InjectedParam.ExtTrigger)); assert_param(IS_DFSDM_FILTER_EXT_TRIG_EDGE(hdfsdm_filter->Init.InjectedParam.ExtTriggerEdge)); hdfsdm_filter->Instance->FLTCR1 |= (hdfsdm_filter->Init.InjectedParam.ExtTrigger); } if(hdfsdm_filter->Init.InjectedParam.ScanMode == ENABLE) { hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSCAN; } else { hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSCAN); } if(hdfsdm_filter->Init.InjectedParam.DmaMode == ENABLE) { hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JDMAEN; } else { hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JDMAEN); } /* Set filter parameters */ hdfsdm_filter->Instance->FLTFCR &= ~(DFSDM_FLTFCR_FORD | DFSDM_FLTFCR_FOSR | DFSDM_FLTFCR_IOSR); hdfsdm_filter->Instance->FLTFCR |= (hdfsdm_filter->Init.FilterParam.SincOrder | ((hdfsdm_filter->Init.FilterParam.Oversampling - 1U) << DFSDM_FLTFCR_FOSR_Pos) | (hdfsdm_filter->Init.FilterParam.IntOversampling - 1U)); /* Store regular and injected triggers and injected scan mode*/ hdfsdm_filter->RegularTrigger = hdfsdm_filter->Init.RegularParam.Trigger; hdfsdm_filter->InjectedTrigger = hdfsdm_filter->Init.InjectedParam.Trigger; hdfsdm_filter->ExtTriggerEdge = hdfsdm_filter->Init.InjectedParam.ExtTriggerEdge; hdfsdm_filter->InjectedScanMode = hdfsdm_filter->Init.InjectedParam.ScanMode; /* Enable DFSDM filter */ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; /* Set DFSDM filter to ready state */ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_READY; return HAL_OK; } /** * @brief De-initializes the DFSDM filter. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status. */ HAL_StatusTypeDef HAL_DFSDM_FilterDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { /* Check DFSDM filter handle */ if(hdfsdm_filter == NULL) { return HAL_ERROR; } /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Disable the DFSDM filter */ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); /* Call MSP deinit function */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) if(hdfsdm_filter->MspDeInitCallback == NULL) { hdfsdm_filter->MspDeInitCallback = HAL_DFSDM_FilterMspDeInit; } hdfsdm_filter->MspDeInitCallback(hdfsdm_filter); #else HAL_DFSDM_FilterMspDeInit(hdfsdm_filter); #endif /* Set DFSDM filter in reset state */ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_RESET; return HAL_OK; } /** * @brief Initializes the DFSDM filter MSP. * @param hdfsdm_filter DFSDM filter handle. * @retval None */ __weak void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdfsdm_filter); /* NOTE : This function should not be modified, when the function is needed, the HAL_DFSDM_FilterMspInit could be implemented in the user file. */ } /** * @brief De-initializes the DFSDM filter MSP. * @param hdfsdm_filter DFSDM filter handle. * @retval None */ __weak void HAL_DFSDM_FilterMspDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdfsdm_filter); /* NOTE : This function should not be modified, when the function is needed, the HAL_DFSDM_FilterMspDeInit could be implemented in the user file. */ } #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) /** * @brief Register a user DFSDM filter callback * to be used instead of the weak predefined callback. * @param hdfsdm_filter DFSDM filter handle. * @param CallbackID ID of the callback to be registered. * This parameter can be one of the following values: * @arg @ref HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID regular conversion complete callback ID. * @arg @ref HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID half regular conversion complete callback ID. * @arg @ref HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID injected conversion complete callback ID. * @arg @ref HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID half injected conversion complete callback ID. * @arg @ref HAL_DFSDM_FILTER_ERROR_CB_ID error callback ID. * @arg @ref HAL_DFSDM_FILTER_MSPINIT_CB_ID MSP init callback ID. * @arg @ref HAL_DFSDM_FILTER_MSPDEINIT_CB_ID MSP de-init callback ID. * @param pCallback pointer to the callback function. * @retval HAL status. */ HAL_StatusTypeDef HAL_DFSDM_Filter_RegisterCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, HAL_DFSDM_Filter_CallbackIDTypeDef CallbackID, pDFSDM_Filter_CallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; if(pCallback == NULL) { /* update the error code */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; /* update return status */ status = HAL_ERROR; } else { if(HAL_DFSDM_FILTER_STATE_READY == hdfsdm_filter->State) { switch (CallbackID) { case HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID : hdfsdm_filter->RegConvCpltCallback = pCallback; break; case HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID : hdfsdm_filter->RegConvHalfCpltCallback = pCallback; break; case HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID : hdfsdm_filter->InjConvCpltCallback = pCallback; break; case HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID : hdfsdm_filter->InjConvHalfCpltCallback = pCallback; break; case HAL_DFSDM_FILTER_ERROR_CB_ID : hdfsdm_filter->ErrorCallback = pCallback; break; case HAL_DFSDM_FILTER_MSPINIT_CB_ID : hdfsdm_filter->MspInitCallback = pCallback; break; case HAL_DFSDM_FILTER_MSPDEINIT_CB_ID : hdfsdm_filter->MspDeInitCallback = pCallback; break; default : /* update the error code */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; /* update return status */ status = HAL_ERROR; break; } } else if(HAL_DFSDM_FILTER_STATE_RESET == hdfsdm_filter->State) { switch (CallbackID) { case HAL_DFSDM_FILTER_MSPINIT_CB_ID : hdfsdm_filter->MspInitCallback = pCallback; break; case HAL_DFSDM_FILTER_MSPDEINIT_CB_ID : hdfsdm_filter->MspDeInitCallback = pCallback; break; default : /* update the error code */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; /* update return status */ status = HAL_ERROR; break; } } else { /* update the error code */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; /* update return status */ status = HAL_ERROR; } } return status; } /** * @brief Unregister a user DFSDM filter callback. * DFSDM filter callback is redirected to the weak predefined callback. * @param hdfsdm_filter DFSDM filter handle. * @param CallbackID ID of the callback to be unregistered. * This parameter can be one of the following values: * @arg @ref HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID regular conversion complete callback ID. * @arg @ref HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID half regular conversion complete callback ID. * @arg @ref HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID injected conversion complete callback ID. * @arg @ref HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID half injected conversion complete callback ID. * @arg @ref HAL_DFSDM_FILTER_ERROR_CB_ID error callback ID. * @arg @ref HAL_DFSDM_FILTER_MSPINIT_CB_ID MSP init callback ID. * @arg @ref HAL_DFSDM_FILTER_MSPDEINIT_CB_ID MSP de-init callback ID. * @retval HAL status. */ HAL_StatusTypeDef HAL_DFSDM_Filter_UnRegisterCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, HAL_DFSDM_Filter_CallbackIDTypeDef CallbackID) { HAL_StatusTypeDef status = HAL_OK; if(HAL_DFSDM_FILTER_STATE_READY == hdfsdm_filter->State) { switch (CallbackID) { case HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID : hdfsdm_filter->RegConvCpltCallback = HAL_DFSDM_FilterRegConvCpltCallback; break; case HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID : hdfsdm_filter->RegConvHalfCpltCallback = HAL_DFSDM_FilterRegConvHalfCpltCallback; break; case HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID : hdfsdm_filter->InjConvCpltCallback = HAL_DFSDM_FilterInjConvCpltCallback; break; case HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID : hdfsdm_filter->InjConvHalfCpltCallback = HAL_DFSDM_FilterInjConvHalfCpltCallback; break; case HAL_DFSDM_FILTER_ERROR_CB_ID : hdfsdm_filter->ErrorCallback = HAL_DFSDM_FilterErrorCallback; break; case HAL_DFSDM_FILTER_MSPINIT_CB_ID : hdfsdm_filter->MspInitCallback = HAL_DFSDM_FilterMspInit; break; case HAL_DFSDM_FILTER_MSPDEINIT_CB_ID : hdfsdm_filter->MspDeInitCallback = HAL_DFSDM_FilterMspDeInit; break; default : /* update the error code */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; /* update return status */ status = HAL_ERROR; break; } } else if(HAL_DFSDM_FILTER_STATE_RESET == hdfsdm_filter->State) { switch (CallbackID) { case HAL_DFSDM_FILTER_MSPINIT_CB_ID : hdfsdm_filter->MspInitCallback = HAL_DFSDM_FilterMspInit; break; case HAL_DFSDM_FILTER_MSPDEINIT_CB_ID : hdfsdm_filter->MspDeInitCallback = HAL_DFSDM_FilterMspDeInit; break; default : /* update the error code */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; /* update return status */ status = HAL_ERROR; break; } } else { /* update the error code */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; /* update return status */ status = HAL_ERROR; } return status; } /** * @brief Register a user DFSDM filter analog watchdog callback * to be used instead of the weak predefined callback. * @param hdfsdm_filter DFSDM filter handle. * @param pCallback pointer to the DFSDM filter analog watchdog callback function. * @retval HAL status. */ HAL_StatusTypeDef HAL_DFSDM_Filter_RegisterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, pDFSDM_Filter_AwdCallbackTypeDef pCallback) { HAL_StatusTypeDef status = HAL_OK; if(pCallback == NULL) { /* update the error code */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; /* update return status */ status = HAL_ERROR; } else { if(HAL_DFSDM_FILTER_STATE_READY == hdfsdm_filter->State) { hdfsdm_filter->AwdCallback = pCallback; } else { /* update the error code */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; /* update return status */ status = HAL_ERROR; } } return status; } /** * @brief Unregister a user DFSDM filter analog watchdog callback. * DFSDM filter AWD callback is redirected to the weak predefined callback. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status. */ HAL_StatusTypeDef HAL_DFSDM_Filter_UnRegisterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { HAL_StatusTypeDef status = HAL_OK; if(HAL_DFSDM_FILTER_STATE_READY == hdfsdm_filter->State) { hdfsdm_filter->AwdCallback = HAL_DFSDM_FilterAwdCallback; } else { /* update the error code */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INVALID_CALLBACK; /* update return status */ status = HAL_ERROR; } return status; } #endif /* USE_HAL_DFSDM_REGISTER_CALLBACKS */ /** * @} */ /** @defgroup DFSDM_Exported_Functions_Group2_Filter Filter control functions * @brief Filter control functions * @verbatim ============================================================================== ##### Filter control functions ##### ============================================================================== [..] This section provides functions allowing to: (+) Select channel and enable/disable continuous mode for regular conversion. (+) Select channels for injected conversion. @endverbatim * @{ */ /** * @brief This function allows to select channel and to enable/disable * continuous mode for regular conversion. * @param hdfsdm_filter DFSDM filter handle. * @param Channel Channel for regular conversion. * This parameter can be a value of @ref DFSDM_Channel_Selection. * @param ContinuousMode Enable/disable continuous mode for regular conversion. * This parameter can be a value of @ref DFSDM_ContinuousMode. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterConfigRegChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel, uint32_t ContinuousMode) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); assert_param(IS_DFSDM_REGULAR_CHANNEL(Channel)); assert_param(IS_DFSDM_CONTINUOUS_MODE(ContinuousMode)); /* Check DFSDM filter state */ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_RESET) && (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_ERROR)) { /* Configure channel and continuous mode for regular conversion */ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RCH | DFSDM_FLTCR1_RCONT); if(ContinuousMode == DFSDM_CONTINUOUS_CONV_ON) { hdfsdm_filter->Instance->FLTCR1 |= (uint32_t) (((Channel & DFSDM_MSB_MASK) << DFSDM_FLTCR1_MSB_RCH_OFFSET) | DFSDM_FLTCR1_RCONT); } else { hdfsdm_filter->Instance->FLTCR1 |= (uint32_t) ((Channel & DFSDM_MSB_MASK) << DFSDM_FLTCR1_MSB_RCH_OFFSET); } /* Store continuous mode information */ hdfsdm_filter->RegularContMode = ContinuousMode; } else { status = HAL_ERROR; } /* Return function status */ return status; } /** * @brief This function allows to select channels for injected conversion. * @param hdfsdm_filter DFSDM filter handle. * @param Channel Channels for injected conversion. * This parameter can be a values combination of @ref DFSDM_Channel_Selection. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterConfigInjChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); assert_param(IS_DFSDM_INJECTED_CHANNEL(Channel)); /* Check DFSDM filter state */ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_RESET) && (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_ERROR)) { /* Configure channel for injected conversion */ hdfsdm_filter->Instance->FLTJCHGR = (uint32_t) (Channel & DFSDM_LSB_MASK); /* Store number of injected channels */ hdfsdm_filter->InjectedChannelsNbr = DFSDM_GetInjChannelsNbr(Channel); /* Update number of injected channels remaining */ hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ hdfsdm_filter->InjectedChannelsNbr : 1U; } else { status = HAL_ERROR; } /* Return function status */ return status; } /** * @} */ /** @defgroup DFSDM_Exported_Functions_Group3_Filter Filter operation functions * @brief Filter operation functions * @verbatim ============================================================================== ##### Filter operation functions ##### ============================================================================== [..] This section provides functions allowing to: (+) Start conversion of regular/injected channel. (+) Poll for the end of regular/injected conversion. (+) Stop conversion of regular/injected channel. (+) Start conversion of regular/injected channel and enable interrupt. (+) Call the callback functions at the end of regular/injected conversions. (+) Stop conversion of regular/injected channel and disable interrupt. (+) Start conversion of regular/injected channel and enable DMA transfer. (+) Stop conversion of regular/injected channel and disable DMA transfer. (+) Start analog watchdog and enable interrupt. (+) Call the callback function when analog watchdog occurs. (+) Stop analog watchdog and disable interrupt. (+) Start extreme detector. (+) Stop extreme detector. (+) Get result of regular channel conversion. (+) Get result of injected channel conversion. (+) Get extreme detector maximum and minimum values. (+) Get conversion time. (+) Handle DFSDM interrupt request. @endverbatim * @{ */ /** * @brief This function allows to start regular conversion in polling mode. * @note This function should be called only when DFSDM filter instance is * in idle state or if injected conversion is ongoing. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)) { /* Start regular conversion */ DFSDM_RegConvStart(hdfsdm_filter); } else { status = HAL_ERROR; } /* Return function status */ return status; } /** * @brief This function allows to poll for the end of regular conversion. * @note This function should be called only if regular conversion is ongoing. * @param hdfsdm_filter DFSDM filter handle. * @param Timeout Timeout value in milliseconds. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterPollForRegConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Timeout) { uint32_t tickstart; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) { /* Return error status */ return HAL_ERROR; } else { /* Get timeout */ tickstart = HAL_GetTick(); /* Wait end of regular conversion */ while((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_REOCF) != DFSDM_FLTISR_REOCF) { /* Check the Timeout */ if(Timeout != HAL_MAX_DELAY) { if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) { /* Return timeout status */ return HAL_TIMEOUT; } } } /* Check if overrun occurs */ if((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_ROVRF) == DFSDM_FLTISR_ROVRF) { /* Update error code and call error callback */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_REGULAR_OVERRUN; #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) hdfsdm_filter->ErrorCallback(hdfsdm_filter); #else HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); #endif /* Clear regular overrun flag */ hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRROVRF; } /* Update DFSDM filter state only if not continuous conversion and SW trigger */ if((hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)) { hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \ HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ; } /* Return function status */ return HAL_OK; } } /** * @brief This function allows to stop regular conversion in polling mode. * @note This function should be called only if regular conversion is ongoing. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) { /* Return error status */ status = HAL_ERROR; } else { /* Stop regular conversion */ DFSDM_RegConvStop(hdfsdm_filter); } /* Return function status */ return status; } /** * @brief This function allows to start regular conversion in interrupt mode. * @note This function should be called only when DFSDM filter instance is * in idle state or if injected conversion is ongoing. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)) { /* Enable interrupts for regular conversions */ hdfsdm_filter->Instance->FLTCR2 |= (DFSDM_FLTCR2_REOCIE | DFSDM_FLTCR2_ROVRIE); /* Start regular conversion */ DFSDM_RegConvStart(hdfsdm_filter); } else { status = HAL_ERROR; } /* Return function status */ return status; } /** * @brief This function allows to stop regular conversion in interrupt mode. * @note This function should be called only if regular conversion is ongoing. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) { /* Return error status */ status = HAL_ERROR; } else { /* Disable interrupts for regular conversions */ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_REOCIE | DFSDM_FLTCR2_ROVRIE); /* Stop regular conversion */ DFSDM_RegConvStop(hdfsdm_filter); } /* Return function status */ return status; } /** * @brief This function allows to start regular conversion in DMA mode. * @note This function should be called only when DFSDM filter instance is * in idle state or if injected conversion is ongoing. * Please note that data on buffer will contain signed regular conversion * value on 24 most significant bits and corresponding channel on 3 least * significant bits. * @param hdfsdm_filter DFSDM filter handle. * @param pData The destination buffer address. * @param Length The length of data to be transferred from DFSDM filter to memory. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int32_t *pData, uint32_t Length) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check destination address and length */ if((pData == NULL) || (Length == 0U)) { status = HAL_ERROR; } /* Check that DMA is enabled for regular conversion */ else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_RDMAEN) != DFSDM_FLTCR1_RDMAEN) { status = HAL_ERROR; } /* Check parameters compatibility */ else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \ (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ (hdfsdm_filter->hdmaReg->Init.Mode == DMA_NORMAL) && \ (Length != 1U)) { status = HAL_ERROR; } else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \ (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR)) { status = HAL_ERROR; } /* Check DFSDM filter state */ else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)) { /* Set callbacks on DMA handler */ hdfsdm_filter->hdmaReg->XferCpltCallback = DFSDM_DMARegularConvCplt; hdfsdm_filter->hdmaReg->XferErrorCallback = DFSDM_DMAError; hdfsdm_filter->hdmaReg->XferHalfCpltCallback = (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR) ?\ DFSDM_DMARegularHalfConvCplt : NULL; /* Start DMA in interrupt mode */ if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaReg, (uint32_t)&hdfsdm_filter->Instance->FLTRDATAR, \ (uint32_t) pData, Length) != HAL_OK) { /* Set DFSDM filter in error state */ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; status = HAL_ERROR; } else { /* Start regular conversion */ DFSDM_RegConvStart(hdfsdm_filter); } } else { status = HAL_ERROR; } /* Return function status */ return status; } /** * @brief This function allows to start regular conversion in DMA mode and to get * only the 16 most significant bits of conversion. * @note This function should be called only when DFSDM filter instance is * in idle state or if injected conversion is ongoing. * Please note that data on buffer will contain signed 16 most significant * bits of regular conversion. * @param hdfsdm_filter DFSDM filter handle. * @param pData The destination buffer address. * @param Length The length of data to be transferred from DFSDM filter to memory. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterRegularMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int16_t *pData, uint32_t Length) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check destination address and length */ if((pData == NULL) || (Length == 0U)) { status = HAL_ERROR; } /* Check that DMA is enabled for regular conversion */ else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_RDMAEN) != DFSDM_FLTCR1_RDMAEN) { status = HAL_ERROR; } /* Check parameters compatibility */ else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \ (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ (hdfsdm_filter->hdmaReg->Init.Mode == DMA_NORMAL) && \ (Length != 1U)) { status = HAL_ERROR; } else if((hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) && \ (hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR)) { status = HAL_ERROR; } /* Check DFSDM filter state */ else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ)) { /* Set callbacks on DMA handler */ hdfsdm_filter->hdmaReg->XferCpltCallback = DFSDM_DMARegularConvCplt; hdfsdm_filter->hdmaReg->XferErrorCallback = DFSDM_DMAError; hdfsdm_filter->hdmaReg->XferHalfCpltCallback = (hdfsdm_filter->hdmaReg->Init.Mode == DMA_CIRCULAR) ?\ DFSDM_DMARegularHalfConvCplt : NULL; /* Start DMA in interrupt mode */ if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaReg, (uint32_t)(&hdfsdm_filter->Instance->FLTRDATAR) + 2U, \ (uint32_t) pData, Length) != HAL_OK) { /* Set DFSDM filter in error state */ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; status = HAL_ERROR; } else { /* Start regular conversion */ DFSDM_RegConvStart(hdfsdm_filter); } } else { status = HAL_ERROR; } /* Return function status */ return status; } /** * @brief This function allows to stop regular conversion in DMA mode. * @note This function should be called only if regular conversion is ongoing. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG) && \ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) { /* Return error status */ status = HAL_ERROR; } else { /* Stop current DMA transfer */ if(HAL_DMA_Abort(hdfsdm_filter->hdmaReg) != HAL_OK) { /* Set DFSDM filter in error state */ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; status = HAL_ERROR; } else { /* Stop regular conversion */ DFSDM_RegConvStop(hdfsdm_filter); } } /* Return function status */ return status; } /** * @brief This function allows to get regular conversion value. * @param hdfsdm_filter DFSDM filter handle. * @param Channel Corresponding channel of regular conversion. * @retval Regular conversion value */ int32_t HAL_DFSDM_FilterGetRegularValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t *Channel) { uint32_t reg; int32_t value; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); assert_param(Channel != (void *)0); /* Get value of data register for regular channel */ reg = hdfsdm_filter->Instance->FLTRDATAR; /* Extract channel and regular conversion value */ *Channel = (reg & DFSDM_FLTRDATAR_RDATACH); /* Regular conversion value is a signed value located on 24 MSB of register */ /* So after applying a mask on these bits we have to perform a division by 256 (2 raised to the power of 8) */ reg &= DFSDM_FLTRDATAR_RDATA; value = ((int32_t)reg) / 256; /* return regular conversion value */ return value; } /** * @brief This function allows to start injected conversion in polling mode. * @note This function should be called only when DFSDM filter instance is * in idle state or if regular conversion is ongoing. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG)) { /* Start injected conversion */ DFSDM_InjConvStart(hdfsdm_filter); } else { status = HAL_ERROR; } /* Return function status */ return status; } /** * @brief This function allows to poll for the end of injected conversion. * @note This function should be called only if injected conversion is ongoing. * @param hdfsdm_filter DFSDM filter handle. * @param Timeout Timeout value in milliseconds. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterPollForInjConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Timeout) { uint32_t tickstart; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) { /* Return error status */ return HAL_ERROR; } else { /* Get timeout */ tickstart = HAL_GetTick(); /* Wait end of injected conversions */ while((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JEOCF) != DFSDM_FLTISR_JEOCF) { /* Check the Timeout */ if(Timeout != HAL_MAX_DELAY) { if(((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) { /* Return timeout status */ return HAL_TIMEOUT; } } } /* Check if overrun occurs */ if((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_JOVRF) == DFSDM_FLTISR_JOVRF) { /* Update error code and call error callback */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INJECTED_OVERRUN; #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) hdfsdm_filter->ErrorCallback(hdfsdm_filter); #else HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); #endif /* Clear injected overrun flag */ hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRJOVRF; } /* Update remaining injected conversions */ hdfsdm_filter->InjConvRemaining--; if(hdfsdm_filter->InjConvRemaining == 0U) { /* Update DFSDM filter state only if trigger is software */ if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) { hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \ HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG; } /* end of injected sequence, reset the value */ hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ hdfsdm_filter->InjectedChannelsNbr : 1U; } /* Return function status */ return HAL_OK; } } /** * @brief This function allows to stop injected conversion in polling mode. * @note This function should be called only if injected conversion is ongoing. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) { /* Return error status */ status = HAL_ERROR; } else { /* Stop injected conversion */ DFSDM_InjConvStop(hdfsdm_filter); } /* Return function status */ return status; } /** * @brief This function allows to start injected conversion in interrupt mode. * @note This function should be called only when DFSDM filter instance is * in idle state or if regular conversion is ongoing. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG)) { /* Enable interrupts for injected conversions */ hdfsdm_filter->Instance->FLTCR2 |= (DFSDM_FLTCR2_JEOCIE | DFSDM_FLTCR2_JOVRIE); /* Start injected conversion */ DFSDM_InjConvStart(hdfsdm_filter); } else { status = HAL_ERROR; } /* Return function status */ return status; } /** * @brief This function allows to stop injected conversion in interrupt mode. * @note This function should be called only if injected conversion is ongoing. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) { /* Return error status */ status = HAL_ERROR; } else { /* Disable interrupts for injected conversions */ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_JEOCIE | DFSDM_FLTCR2_JOVRIE); /* Stop injected conversion */ DFSDM_InjConvStop(hdfsdm_filter); } /* Return function status */ return status; } /** * @brief This function allows to start injected conversion in DMA mode. * @note This function should be called only when DFSDM filter instance is * in idle state or if regular conversion is ongoing. * Please note that data on buffer will contain signed injected conversion * value on 24 most significant bits and corresponding channel on 3 least * significant bits. * @param hdfsdm_filter DFSDM filter handle. * @param pData The destination buffer address. * @param Length The length of data to be transferred from DFSDM filter to memory. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int32_t *pData, uint32_t Length) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check destination address and length */ if((pData == NULL) || (Length == 0U)) { status = HAL_ERROR; } /* Check that DMA is enabled for injected conversion */ else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_JDMAEN) != DFSDM_FLTCR1_JDMAEN) { status = HAL_ERROR; } /* Check parameters compatibility */ else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \ (hdfsdm_filter->hdmaInj->Init.Mode == DMA_NORMAL) && \ (Length > hdfsdm_filter->InjConvRemaining)) { status = HAL_ERROR; } else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \ (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR)) { status = HAL_ERROR; } /* Check DFSDM filter state */ else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG)) { /* Set callbacks on DMA handler */ hdfsdm_filter->hdmaInj->XferCpltCallback = DFSDM_DMAInjectedConvCplt; hdfsdm_filter->hdmaInj->XferErrorCallback = DFSDM_DMAError; hdfsdm_filter->hdmaInj->XferHalfCpltCallback = (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR) ?\ DFSDM_DMAInjectedHalfConvCplt : NULL; /* Start DMA in interrupt mode */ if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaInj, (uint32_t)&hdfsdm_filter->Instance->FLTJDATAR, \ (uint32_t) pData, Length) != HAL_OK) { /* Set DFSDM filter in error state */ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; status = HAL_ERROR; } else { /* Start injected conversion */ DFSDM_InjConvStart(hdfsdm_filter); } } else { status = HAL_ERROR; } /* Return function status */ return status; } /** * @brief This function allows to start injected conversion in DMA mode and to get * only the 16 most significant bits of conversion. * @note This function should be called only when DFSDM filter instance is * in idle state or if regular conversion is ongoing. * Please note that data on buffer will contain signed 16 most significant * bits of injected conversion. * @param hdfsdm_filter DFSDM filter handle. * @param pData The destination buffer address. * @param Length The length of data to be transferred from DFSDM filter to memory. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterInjectedMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int16_t *pData, uint32_t Length) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check destination address and length */ if((pData == NULL) || (Length == 0U)) { status = HAL_ERROR; } /* Check that DMA is enabled for injected conversion */ else if((hdfsdm_filter->Instance->FLTCR1 & DFSDM_FLTCR1_JDMAEN) != DFSDM_FLTCR1_JDMAEN) { status = HAL_ERROR; } /* Check parameters compatibility */ else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \ (hdfsdm_filter->hdmaInj->Init.Mode == DMA_NORMAL) && \ (Length > hdfsdm_filter->InjConvRemaining)) { status = HAL_ERROR; } else if((hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) && \ (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR)) { status = HAL_ERROR; } /* Check DFSDM filter state */ else if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) || \ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG)) { /* Set callbacks on DMA handler */ hdfsdm_filter->hdmaInj->XferCpltCallback = DFSDM_DMAInjectedConvCplt; hdfsdm_filter->hdmaInj->XferErrorCallback = DFSDM_DMAError; hdfsdm_filter->hdmaInj->XferHalfCpltCallback = (hdfsdm_filter->hdmaInj->Init.Mode == DMA_CIRCULAR) ?\ DFSDM_DMAInjectedHalfConvCplt : NULL; /* Start DMA in interrupt mode */ if(HAL_DMA_Start_IT(hdfsdm_filter->hdmaInj, (uint32_t)(&hdfsdm_filter->Instance->FLTJDATAR) + 2U, \ (uint32_t) pData, Length) != HAL_OK) { /* Set DFSDM filter in error state */ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; status = HAL_ERROR; } else { /* Start injected conversion */ DFSDM_InjConvStart(hdfsdm_filter); } } else { status = HAL_ERROR; } /* Return function status */ return status; } /** * @brief This function allows to stop injected conversion in DMA mode. * @note This function should be called only if injected conversion is ongoing. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_INJ) && \ (hdfsdm_filter->State != HAL_DFSDM_FILTER_STATE_REG_INJ)) { /* Return error status */ status = HAL_ERROR; } else { /* Stop current DMA transfer */ if(HAL_DMA_Abort(hdfsdm_filter->hdmaInj) != HAL_OK) { /* Set DFSDM filter in error state */ hdfsdm_filter->State = HAL_DFSDM_FILTER_STATE_ERROR; status = HAL_ERROR; } else { /* Stop regular conversion */ DFSDM_InjConvStop(hdfsdm_filter); } } /* Return function status */ return status; } /** * @brief This function allows to get injected conversion value. * @param hdfsdm_filter DFSDM filter handle. * @param Channel Corresponding channel of injected conversion. * @retval Injected conversion value */ int32_t HAL_DFSDM_FilterGetInjectedValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t *Channel) { uint32_t reg; int32_t value; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); assert_param(Channel != (void *)0); /* Get value of data register for injected channel */ reg = hdfsdm_filter->Instance->FLTJDATAR; /* Extract channel and injected conversion value */ *Channel = (reg & DFSDM_FLTJDATAR_JDATACH); /* Injected conversion value is a signed value located on 24 MSB of register */ /* So after applying a mask on these bits we have to perform a division by 256 (2 raised to the power of 8) */ reg &= DFSDM_FLTJDATAR_JDATA; value = ((int32_t)reg) / 256; /* return regular conversion value */ return value; } /** * @brief This function allows to start filter analog watchdog in interrupt mode. * @param hdfsdm_filter DFSDM filter handle. * @param awdParam DFSDM filter analog watchdog parameters. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterAwdStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, DFSDM_Filter_AwdParamTypeDef *awdParam) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); assert_param(IS_DFSDM_FILTER_AWD_DATA_SOURCE(awdParam->DataSource)); assert_param(IS_DFSDM_INJECTED_CHANNEL(awdParam->Channel)); assert_param(IS_DFSDM_FILTER_AWD_THRESHOLD(awdParam->HighThreshold)); assert_param(IS_DFSDM_FILTER_AWD_THRESHOLD(awdParam->LowThreshold)); assert_param(IS_DFSDM_BREAK_SIGNALS(awdParam->HighBreakSignal)); assert_param(IS_DFSDM_BREAK_SIGNALS(awdParam->LowBreakSignal)); /* Check DFSDM filter state */ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR)) { /* Return error status */ status = HAL_ERROR; } else { /* Set analog watchdog data source */ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_AWFSEL); hdfsdm_filter->Instance->FLTCR1 |= awdParam->DataSource; /* Set thresholds and break signals */ hdfsdm_filter->Instance->FLTAWHTR &= ~(DFSDM_FLTAWHTR_AWHT | DFSDM_FLTAWHTR_BKAWH); hdfsdm_filter->Instance->FLTAWHTR |= (((uint32_t) awdParam->HighThreshold << DFSDM_FLTAWHTR_AWHT_Pos) | \ awdParam->HighBreakSignal); hdfsdm_filter->Instance->FLTAWLTR &= ~(DFSDM_FLTAWLTR_AWLT | DFSDM_FLTAWLTR_BKAWL); hdfsdm_filter->Instance->FLTAWLTR |= (((uint32_t) awdParam->LowThreshold << DFSDM_FLTAWLTR_AWLT_Pos) | \ awdParam->LowBreakSignal); /* Set channels and interrupt for analog watchdog */ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_AWDCH); hdfsdm_filter->Instance->FLTCR2 |= (((awdParam->Channel & DFSDM_LSB_MASK) << DFSDM_FLTCR2_AWDCH_Pos) | \ DFSDM_FLTCR2_AWDIE); } /* Return function status */ return status; } /** * @brief This function allows to stop filter analog watchdog in interrupt mode. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterAwdStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR)) { /* Return error status */ status = HAL_ERROR; } else { /* Reset channels for analog watchdog and deactivate interrupt */ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_AWDCH | DFSDM_FLTCR2_AWDIE); /* Clear all analog watchdog flags */ hdfsdm_filter->Instance->FLTAWCFR = (DFSDM_FLTAWCFR_CLRAWHTF | DFSDM_FLTAWCFR_CLRAWLTF); /* Reset thresholds and break signals */ hdfsdm_filter->Instance->FLTAWHTR &= ~(DFSDM_FLTAWHTR_AWHT | DFSDM_FLTAWHTR_BKAWH); hdfsdm_filter->Instance->FLTAWLTR &= ~(DFSDM_FLTAWLTR_AWLT | DFSDM_FLTAWLTR_BKAWL); /* Reset analog watchdog data source */ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_AWFSEL); } /* Return function status */ return status; } /** * @brief This function allows to start extreme detector feature. * @param hdfsdm_filter DFSDM filter handle. * @param Channel Channels where extreme detector is enabled. * This parameter can be a values combination of @ref DFSDM_Channel_Selection. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterExdStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel) { HAL_StatusTypeDef status = HAL_OK; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); assert_param(IS_DFSDM_INJECTED_CHANNEL(Channel)); /* Check DFSDM filter state */ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR)) { /* Return error status */ status = HAL_ERROR; } else { /* Set channels for extreme detector */ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_EXCH); hdfsdm_filter->Instance->FLTCR2 |= ((Channel & DFSDM_LSB_MASK) << DFSDM_FLTCR2_EXCH_Pos); } /* Return function status */ return status; } /** * @brief This function allows to stop extreme detector feature. * @param hdfsdm_filter DFSDM filter handle. * @retval HAL status */ HAL_StatusTypeDef HAL_DFSDM_FilterExdStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { HAL_StatusTypeDef status = HAL_OK; __IO uint32_t reg1; __IO uint32_t reg2; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Check DFSDM filter state */ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_RESET) || \ (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_ERROR)) { /* Return error status */ status = HAL_ERROR; } else { /* Reset channels for extreme detector */ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_EXCH); /* Clear extreme detector values */ reg1 = hdfsdm_filter->Instance->FLTEXMAX; reg2 = hdfsdm_filter->Instance->FLTEXMIN; UNUSED(reg1); /* To avoid GCC warning */ UNUSED(reg2); /* To avoid GCC warning */ } /* Return function status */ return status; } /** * @brief This function allows to get extreme detector maximum value. * @param hdfsdm_filter DFSDM filter handle. * @param Channel Corresponding channel. * @retval Extreme detector maximum value * This value is between Min_Data = -8388608 and Max_Data = 8388607. */ int32_t HAL_DFSDM_FilterGetExdMaxValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t *Channel) { uint32_t reg; int32_t value; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); assert_param(Channel != (void *)0); /* Get value of extreme detector maximum register */ reg = hdfsdm_filter->Instance->FLTEXMAX; /* Extract channel and extreme detector maximum value */ *Channel = (reg & DFSDM_FLTEXMAX_EXMAXCH); /* Extreme detector maximum value is a signed value located on 24 MSB of register */ /* So after applying a mask on these bits we have to perform a division by 256 (2 raised to the power of 8) */ reg &= DFSDM_FLTEXMAX_EXMAX; value = ((int32_t)reg) / 256; /* return extreme detector maximum value */ return value; } /** * @brief This function allows to get extreme detector minimum value. * @param hdfsdm_filter DFSDM filter handle. * @param Channel Corresponding channel. * @retval Extreme detector minimum value * This value is between Min_Data = -8388608 and Max_Data = 8388607. */ int32_t HAL_DFSDM_FilterGetExdMinValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t *Channel) { uint32_t reg; int32_t value; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); assert_param(Channel != (void *)0); /* Get value of extreme detector minimum register */ reg = hdfsdm_filter->Instance->FLTEXMIN; /* Extract channel and extreme detector minimum value */ *Channel = (reg & DFSDM_FLTEXMIN_EXMINCH); /* Extreme detector minimum value is a signed value located on 24 MSB of register */ /* So after applying a mask on these bits we have to perform a division by 256 (2 raised to the power of 8) */ reg &= DFSDM_FLTEXMIN_EXMIN; value = ((int32_t)reg) / 256; /* return extreme detector minimum value */ return value; } /** * @brief This function allows to get conversion time value. * @param hdfsdm_filter DFSDM filter handle. * @retval Conversion time value * @note To get time in second, this value has to be divided by DFSDM clock frequency. */ uint32_t HAL_DFSDM_FilterGetConvTimeValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { uint32_t reg; uint32_t value; /* Check parameters */ assert_param(IS_DFSDM_FILTER_ALL_INSTANCE(hdfsdm_filter->Instance)); /* Get value of conversion timer register */ reg = hdfsdm_filter->Instance->FLTCNVTIMR; /* Extract conversion time value */ value = ((reg & DFSDM_FLTCNVTIMR_CNVCNT) >> DFSDM_FLTCNVTIMR_CNVCNT_Pos); /* return extreme detector minimum value */ return value; } /** * @brief This function handles the DFSDM interrupts. * @param hdfsdm_filter DFSDM filter handle. * @retval None */ void HAL_DFSDM_IRQHandler(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { DFSDM_Channel_HandleTypeDef **channelHandleTable; const DFSDM_Filter_TypeDef *filter0Instance; uint32_t channelNumber; /* Get FTLISR and FLTCR2 register values */ const uint32_t temp_fltisr = hdfsdm_filter->Instance->FLTISR; const uint32_t temp_fltcr2 = hdfsdm_filter->Instance->FLTCR2; #if defined(DFSDM2_Channel0) if (IS_DFSDM1_FILTER_INSTANCE(hdfsdm_filter->Instance)) { channelHandleTable = a_dfsdm1ChannelHandle; filter0Instance = DFSDM1_Filter0; channelNumber = DFSDM1_CHANNEL_NUMBER; } else { channelHandleTable = a_dfsdm2ChannelHandle; filter0Instance = DFSDM2_Filter0; channelNumber = DFSDM2_CHANNEL_NUMBER; } #else /* DFSDM2_Channel0 */ channelHandleTable = a_dfsdm1ChannelHandle; filter0Instance = DFSDM1_Filter0; channelNumber = DFSDM1_CHANNEL_NUMBER; #endif /* DFSDM2_Channel0 */ /* Check if overrun occurs during regular conversion */ if(((temp_fltisr & DFSDM_FLTISR_ROVRF) != 0U) && \ ((temp_fltcr2 & DFSDM_FLTCR2_ROVRIE) != 0U)) { /* Clear regular overrun flag */ hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRROVRF; /* Update error code */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_REGULAR_OVERRUN; /* Call error callback */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) hdfsdm_filter->ErrorCallback(hdfsdm_filter); #else HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); #endif } /* Check if overrun occurs during injected conversion */ else if(((temp_fltisr & DFSDM_FLTISR_JOVRF) != 0U) && \ ((temp_fltcr2 & DFSDM_FLTCR2_JOVRIE) != 0U)) { /* Clear injected overrun flag */ hdfsdm_filter->Instance->FLTICR = DFSDM_FLTICR_CLRJOVRF; /* Update error code */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_INJECTED_OVERRUN; /* Call error callback */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) hdfsdm_filter->ErrorCallback(hdfsdm_filter); #else HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); #endif } /* Check if end of regular conversion */ else if(((temp_fltisr & DFSDM_FLTISR_REOCF) != 0U) && \ ((temp_fltcr2 & DFSDM_FLTCR2_REOCIE) != 0U)) { /* Call regular conversion complete callback */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) hdfsdm_filter->RegConvCpltCallback(hdfsdm_filter); #else HAL_DFSDM_FilterRegConvCpltCallback(hdfsdm_filter); #endif /* End of conversion if mode is not continuous and software trigger */ if((hdfsdm_filter->RegularContMode == DFSDM_CONTINUOUS_CONV_OFF) && \ (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)) { /* Disable interrupts for regular conversions */ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_REOCIE); /* Update DFSDM filter state */ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \ HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ; } } /* Check if end of injected conversion */ else if(((temp_fltisr & DFSDM_FLTISR_JEOCF) != 0U) && \ ((temp_fltcr2 & DFSDM_FLTCR2_JEOCIE) != 0U)) { /* Call injected conversion complete callback */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) hdfsdm_filter->InjConvCpltCallback(hdfsdm_filter); #else HAL_DFSDM_FilterInjConvCpltCallback(hdfsdm_filter); #endif /* Update remaining injected conversions */ hdfsdm_filter->InjConvRemaining--; if(hdfsdm_filter->InjConvRemaining == 0U) { /* End of conversion if trigger is software */ if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) { /* Disable interrupts for injected conversions */ hdfsdm_filter->Instance->FLTCR2 &= ~(DFSDM_FLTCR2_JEOCIE); /* Update DFSDM filter state */ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \ HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG; } /* end of injected sequence, reset the value */ hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ hdfsdm_filter->InjectedChannelsNbr : 1U; } } /* Check if analog watchdog occurs */ else if(((temp_fltisr & DFSDM_FLTISR_AWDF) != 0U) && \ ((temp_fltcr2 & DFSDM_FLTCR2_AWDIE) != 0U)) { uint32_t reg; uint32_t threshold; uint32_t channel = 0; /* Get channel and threshold */ reg = hdfsdm_filter->Instance->FLTAWSR; threshold = ((reg & DFSDM_FLTAWSR_AWLTF) != 0U) ? DFSDM_AWD_LOW_THRESHOLD : DFSDM_AWD_HIGH_THRESHOLD; if(threshold == DFSDM_AWD_HIGH_THRESHOLD) { reg = reg >> DFSDM_FLTAWSR_AWHTF_Pos; } while (((reg & 1U) == 0U) && (channel < (channelNumber - 1U))) { channel++; reg = reg >> 1; } /* Clear analog watchdog flag */ hdfsdm_filter->Instance->FLTAWCFR = (threshold == DFSDM_AWD_HIGH_THRESHOLD) ? \ (1UL << (DFSDM_FLTAWSR_AWHTF_Pos + channel)) : \ (1UL << channel); /* Call analog watchdog callback */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) hdfsdm_filter->AwdCallback(hdfsdm_filter, channel, threshold); #else HAL_DFSDM_FilterAwdCallback(hdfsdm_filter, channel, threshold); #endif } /* Check if clock absence occurs */ else if((hdfsdm_filter->Instance == filter0Instance) && \ ((temp_fltisr & DFSDM_FLTISR_CKABF) != 0U) && \ ((temp_fltcr2 & DFSDM_FLTCR2_CKABIE) != 0U)) { uint32_t reg; uint32_t channel = 0; reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_CKABF) >> DFSDM_FLTISR_CKABF_Pos); while (channel < channelNumber) { /* Check if flag is set and corresponding channel is enabled */ if (((reg & 1U) != 0U) && (channelHandleTable[channel] != NULL)) { /* Check clock absence has been enabled for this channel */ if ((channelHandleTable[channel]->Instance->CHCFGR1 & DFSDM_CHCFGR1_CKABEN) != 0U) { /* Clear clock absence flag */ hdfsdm_filter->Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRCKABF_Pos + channel)); /* Call clock absence callback */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) channelHandleTable[channel]->CkabCallback(channelHandleTable[channel]); #else HAL_DFSDM_ChannelCkabCallback(channelHandleTable[channel]); #endif } } channel++; reg = reg >> 1; } } /* Check if short circuit detection occurs */ else if((hdfsdm_filter->Instance == filter0Instance) && \ ((temp_fltisr & DFSDM_FLTISR_SCDF) != 0U) && \ ((temp_fltcr2 & DFSDM_FLTCR2_SCDIE) != 0U)) { uint32_t reg; uint32_t channel = 0; /* Get channel */ reg = ((hdfsdm_filter->Instance->FLTISR & DFSDM_FLTISR_SCDF) >> DFSDM_FLTISR_SCDF_Pos); while (((reg & 1U) == 0U) && (channel < (channelNumber - 1U))) { channel++; reg = reg >> 1; } /* Clear short circuit detection flag */ hdfsdm_filter->Instance->FLTICR = (1UL << (DFSDM_FLTICR_CLRSCDF_Pos + channel)); /* Call short circuit detection callback */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) channelHandleTable[channel]->ScdCallback(channelHandleTable[channel]); #else HAL_DFSDM_ChannelScdCallback(channelHandleTable[channel]); #endif } } /** * @brief Regular conversion complete callback. * @note In interrupt mode, user has to read conversion value in this function * using HAL_DFSDM_FilterGetRegularValue. * @param hdfsdm_filter DFSDM filter handle. * @retval None */ __weak void HAL_DFSDM_FilterRegConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdfsdm_filter); /* NOTE : This function should not be modified, when the callback is needed, the HAL_DFSDM_FilterRegConvCpltCallback could be implemented in the user file. */ } /** * @brief Half regular conversion complete callback. * @param hdfsdm_filter DFSDM filter handle. * @retval None */ __weak void HAL_DFSDM_FilterRegConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdfsdm_filter); /* NOTE : This function should not be modified, when the callback is needed, the HAL_DFSDM_FilterRegConvHalfCpltCallback could be implemented in the user file. */ } /** * @brief Injected conversion complete callback. * @note In interrupt mode, user has to read conversion value in this function * using HAL_DFSDM_FilterGetInjectedValue. * @param hdfsdm_filter DFSDM filter handle. * @retval None */ __weak void HAL_DFSDM_FilterInjConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdfsdm_filter); /* NOTE : This function should not be modified, when the callback is needed, the HAL_DFSDM_FilterInjConvCpltCallback could be implemented in the user file. */ } /** * @brief Half injected conversion complete callback. * @param hdfsdm_filter DFSDM filter handle. * @retval None */ __weak void HAL_DFSDM_FilterInjConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdfsdm_filter); /* NOTE : This function should not be modified, when the callback is needed, the HAL_DFSDM_FilterInjConvHalfCpltCallback could be implemented in the user file. */ } /** * @brief Filter analog watchdog callback. * @param hdfsdm_filter DFSDM filter handle. * @param Channel Corresponding channel. * @param Threshold Low or high threshold has been reached. * @retval None */ __weak void HAL_DFSDM_FilterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel, uint32_t Threshold) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdfsdm_filter); UNUSED(Channel); UNUSED(Threshold); /* NOTE : This function should not be modified, when the callback is needed, the HAL_DFSDM_FilterAwdCallback could be implemented in the user file. */ } /** * @brief Error callback. * @param hdfsdm_filter DFSDM filter handle. * @retval None */ __weak void HAL_DFSDM_FilterErrorCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { /* Prevent unused argument(s) compilation warning */ UNUSED(hdfsdm_filter); /* NOTE : This function should not be modified, when the callback is needed, the HAL_DFSDM_FilterErrorCallback could be implemented in the user file. */ } /** * @} */ /** @defgroup DFSDM_Exported_Functions_Group4_Filter Filter state functions * @brief Filter state functions * @verbatim ============================================================================== ##### Filter state functions ##### ============================================================================== [..] This section provides functions allowing to: (+) Get the DFSDM filter state. (+) Get the DFSDM filter error. @endverbatim * @{ */ /** * @brief This function allows to get the current DFSDM filter handle state. * @param hdfsdm_filter DFSDM filter handle. * @retval DFSDM filter state. */ HAL_DFSDM_Filter_StateTypeDef HAL_DFSDM_FilterGetState(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { /* Return DFSDM filter handle state */ return hdfsdm_filter->State; } /** * @brief This function allows to get the current DFSDM filter error. * @param hdfsdm_filter DFSDM filter handle. * @retval DFSDM filter error code. */ uint32_t HAL_DFSDM_FilterGetError(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { return hdfsdm_filter->ErrorCode; } /** * @} */ /** * @} */ /* End of exported functions -------------------------------------------------*/ /* Private functions ---------------------------------------------------------*/ /** @addtogroup DFSDM_Private_Functions DFSDM Private Functions * @{ */ /** * @brief DMA half transfer complete callback for regular conversion. * @param hdma DMA handle. * @retval None */ static void DFSDM_DMARegularHalfConvCplt(DMA_HandleTypeDef *hdma) { /* Get DFSDM filter handle */ DFSDM_Filter_HandleTypeDef *hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; /* Call regular half conversion complete callback */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) hdfsdm_filter->RegConvHalfCpltCallback(hdfsdm_filter); #else HAL_DFSDM_FilterRegConvHalfCpltCallback(hdfsdm_filter); #endif } /** * @brief DMA transfer complete callback for regular conversion. * @param hdma DMA handle. * @retval None */ static void DFSDM_DMARegularConvCplt(DMA_HandleTypeDef *hdma) { /* Get DFSDM filter handle */ DFSDM_Filter_HandleTypeDef *hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; /* Call regular conversion complete callback */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) hdfsdm_filter->RegConvCpltCallback(hdfsdm_filter); #else HAL_DFSDM_FilterRegConvCpltCallback(hdfsdm_filter); #endif } /** * @brief DMA half transfer complete callback for injected conversion. * @param hdma DMA handle. * @retval None */ static void DFSDM_DMAInjectedHalfConvCplt(DMA_HandleTypeDef *hdma) { /* Get DFSDM filter handle */ DFSDM_Filter_HandleTypeDef *hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; /* Call injected half conversion complete callback */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) hdfsdm_filter->InjConvHalfCpltCallback(hdfsdm_filter); #else HAL_DFSDM_FilterInjConvHalfCpltCallback(hdfsdm_filter); #endif } /** * @brief DMA transfer complete callback for injected conversion. * @param hdma DMA handle. * @retval None */ static void DFSDM_DMAInjectedConvCplt(DMA_HandleTypeDef *hdma) { /* Get DFSDM filter handle */ DFSDM_Filter_HandleTypeDef *hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; /* Call injected conversion complete callback */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) hdfsdm_filter->InjConvCpltCallback(hdfsdm_filter); #else HAL_DFSDM_FilterInjConvCpltCallback(hdfsdm_filter); #endif } /** * @brief DMA error callback. * @param hdma DMA handle. * @retval None */ static void DFSDM_DMAError(DMA_HandleTypeDef *hdma) { /* Get DFSDM filter handle */ DFSDM_Filter_HandleTypeDef *hdfsdm_filter = (DFSDM_Filter_HandleTypeDef*) ((DMA_HandleTypeDef*)hdma)->Parent; /* Update error code */ hdfsdm_filter->ErrorCode = DFSDM_FILTER_ERROR_DMA; /* Call error callback */ #if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1) hdfsdm_filter->ErrorCallback(hdfsdm_filter); #else HAL_DFSDM_FilterErrorCallback(hdfsdm_filter); #endif } /** * @brief This function allows to get the number of injected channels. * @param Channels bitfield of injected channels. * @retval Number of injected channels. */ static uint32_t DFSDM_GetInjChannelsNbr(uint32_t Channels) { uint32_t nbChannels = 0; uint32_t tmp; /* Get the number of channels from bitfield */ tmp = (uint32_t)(Channels & DFSDM_LSB_MASK); while(tmp != 0U) { if((tmp & 1U) != 0U) { nbChannels++; } tmp = (uint32_t)(tmp >> 1); } return nbChannels; } /** * @brief This function allows to get the channel number from channel instance. * @param Instance DFSDM channel instance. * @retval Channel number. */ static uint32_t DFSDM_GetChannelFromInstance(const DFSDM_Channel_TypeDef* Instance) { uint32_t channel; /* Get channel from instance */ if(Instance == DFSDM1_Channel0) { channel = 0; } #if defined(DFSDM2_Channel0) else if (Instance == DFSDM2_Channel0) { channel = 0; } else if (Instance == DFSDM2_Channel1) { channel = 1; } #endif /* DFSDM2_Channel0 */ else if(Instance == DFSDM1_Channel1) { channel = 1; } else if(Instance == DFSDM1_Channel2) { channel = 2; } else if(Instance == DFSDM1_Channel3) { channel = 3; } else if(Instance == DFSDM1_Channel4) { channel = 4; } else if(Instance == DFSDM1_Channel5) { channel = 5; } else if(Instance == DFSDM1_Channel6) { channel = 6; } else /* DFSDM1_Channel7 */ { channel = 7; } return channel; } /** * @brief This function allows to really start regular conversion. * @param hdfsdm_filter DFSDM filter handle. * @retval None */ static void DFSDM_RegConvStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { /* Check regular trigger */ if(hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER) { /* Software start of regular conversion */ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART; } else /* synchronous trigger */ { /* Disable DFSDM filter */ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); /* Set RSYNC bit in DFSDM_FLTCR1 register */ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSYNC; /* Enable DFSDM filter */ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; /* If injected conversion was in progress, restart it */ if(hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) { if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) { hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART; } /* Update remaining injected conversions */ hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ hdfsdm_filter->InjectedChannelsNbr : 1U; } } /* Update DFSDM filter state */ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) ? \ HAL_DFSDM_FILTER_STATE_REG : HAL_DFSDM_FILTER_STATE_REG_INJ; } /** * @brief This function allows to really stop regular conversion. * @param hdfsdm_filter DFSDM filter handle. * @retval None */ static void DFSDM_RegConvStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { /* Disable DFSDM filter */ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); /* If regular trigger was synchronous, reset RSYNC bit in DFSDM_FLTCR1 register */ if(hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SYNC_TRIGGER) { hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_RSYNC); } /* Enable DFSDM filter */ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; /* If injected conversion was in progress, restart it */ if(hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG_INJ) { if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) { hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART; } /* Update remaining injected conversions */ hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ hdfsdm_filter->InjectedChannelsNbr : 1U; } /* Update DFSDM filter state */ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) ? \ HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_INJ; } /** * @brief This function allows to really start injected conversion. * @param hdfsdm_filter DFSDM filter handle. * @retval None */ static void DFSDM_InjConvStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { /* Check injected trigger */ if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SW_TRIGGER) { /* Software start of injected conversion */ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSWSTART; } else /* external or synchronous trigger */ { /* Disable DFSDM filter */ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SYNC_TRIGGER) { /* Set JSYNC bit in DFSDM_FLTCR1 register */ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_JSYNC; } else /* external trigger */ { /* Set JEXTEN[1:0] bits in DFSDM_FLTCR1 register */ hdfsdm_filter->Instance->FLTCR1 |= hdfsdm_filter->ExtTriggerEdge; } /* Enable DFSDM filter */ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; /* If regular conversion was in progress, restart it */ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG) && \ (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)) { hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART; } } /* Update DFSDM filter state */ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_READY) ? \ HAL_DFSDM_FILTER_STATE_INJ : HAL_DFSDM_FILTER_STATE_REG_INJ; } /** * @brief This function allows to really stop injected conversion. * @param hdfsdm_filter DFSDM filter handle. * @retval None */ static void DFSDM_InjConvStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter) { /* Disable DFSDM filter */ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_DFEN); /* If injected trigger was synchronous, reset JSYNC bit in DFSDM_FLTCR1 register */ if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_SYNC_TRIGGER) { hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JSYNC); } else if(hdfsdm_filter->InjectedTrigger == DFSDM_FILTER_EXT_TRIGGER) { /* Reset JEXTEN[1:0] bits in DFSDM_FLTCR1 register */ hdfsdm_filter->Instance->FLTCR1 &= ~(DFSDM_FLTCR1_JEXTEN); } else { /* Nothing to do */ } /* Enable DFSDM filter */ hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_DFEN; /* If regular conversion was in progress, restart it */ if((hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_REG_INJ) && \ (hdfsdm_filter->RegularTrigger == DFSDM_FILTER_SW_TRIGGER)) { hdfsdm_filter->Instance->FLTCR1 |= DFSDM_FLTCR1_RSWSTART; } /* Update remaining injected conversions */ hdfsdm_filter->InjConvRemaining = (hdfsdm_filter->InjectedScanMode == ENABLE) ? \ hdfsdm_filter->InjectedChannelsNbr : 1U; /* Update DFSDM filter state */ hdfsdm_filter->State = (hdfsdm_filter->State == HAL_DFSDM_FILTER_STATE_INJ) ? \ HAL_DFSDM_FILTER_STATE_READY : HAL_DFSDM_FILTER_STATE_REG; } /** * @} */ /* End of private functions --------------------------------------------------*/ /** * @} */ #endif /* HAL_DFSDM_MODULE_ENABLED */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/