diff options
Diffstat (limited to 'bsps/arm/stm32h7/include/stm32h7xx_hal_mmc.h')
| -rw-r--r-- | bsps/arm/stm32h7/include/stm32h7xx_hal_mmc.h | 756 |
1 files changed, 756 insertions, 0 deletions
diff --git a/bsps/arm/stm32h7/include/stm32h7xx_hal_mmc.h b/bsps/arm/stm32h7/include/stm32h7xx_hal_mmc.h new file mode 100644 index 0000000000..c8679bba32 --- /dev/null +++ b/bsps/arm/stm32h7/include/stm32h7xx_hal_mmc.h @@ -0,0 +1,756 @@ +/**
+ ******************************************************************************
+ * @file stm32h7xx_hal_mmc.h
+ * @author MCD Application Team
+ * @brief Header file of MMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_MMC_H
+#define STM32H7xx_HAL_MMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_ll_sdmmc.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup MMC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup MMC_Exported_Types MMC Exported Types
+ * @{
+ */
+
+/** @defgroup MMC_Exported_Types_Group1 MMC State enumeration structure
+ * @{
+ */
+typedef enum
+{
+ HAL_MMC_STATE_RESET = ((uint32_t)0x00000000U), /*!< MMC not yet initialized or disabled */
+ HAL_MMC_STATE_READY = ((uint32_t)0x00000001U), /*!< MMC initialized and ready for use */
+ HAL_MMC_STATE_TIMEOUT = ((uint32_t)0x00000002U), /*!< MMC Timeout state */
+ HAL_MMC_STATE_BUSY = ((uint32_t)0x00000003U), /*!< MMC process ongoing */
+ HAL_MMC_STATE_PROGRAMMING = ((uint32_t)0x00000004U), /*!< MMC Programming State */
+ HAL_MMC_STATE_RECEIVING = ((uint32_t)0x00000005U), /*!< MMC Receinving State */
+ HAL_MMC_STATE_TRANSFER = ((uint32_t)0x00000006U), /*!< MMC Transfert State */
+ HAL_MMC_STATE_ERROR = ((uint32_t)0x0000000FU) /*!< MMC is in error state */
+}HAL_MMC_StateTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup MMC_Exported_Types_Group2 MMC Card State enumeration structure
+ * @{
+ */
+typedef uint32_t HAL_MMC_CardStateTypeDef;
+
+#define HAL_MMC_CARD_READY 0x00000001U /*!< Card state is ready */
+#define HAL_MMC_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state */
+#define HAL_MMC_CARD_STANDBY 0x00000003U /*!< Card is in standby state */
+#define HAL_MMC_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */
+#define HAL_MMC_CARD_SENDING 0x00000005U /*!< Card is sending an operation */
+#define HAL_MMC_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */
+#define HAL_MMC_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */
+#define HAL_MMC_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */
+#define HAL_MMC_CARD_ERROR 0x000000FFU /*!< Card response Error */
+/**
+ * @}
+ */
+
+/** @defgroup MMC_Exported_Types_Group3 MMC Handle Structure definition
+ * @{
+ */
+#define MMC_InitTypeDef SDMMC_InitTypeDef
+#define MMC_TypeDef SDMMC_TypeDef
+
+/**
+ * @brief MMC Card Information Structure definition
+ */
+typedef struct
+{
+ uint32_t CardType; /*!< Specifies the card Type */
+
+ uint32_t Class; /*!< Specifies the class of the card class */
+
+ uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */
+
+ uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */
+
+ uint32_t BlockSize; /*!< Specifies one block size in bytes */
+
+ uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */
+
+ uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */
+
+}HAL_MMC_CardInfoTypeDef;
+
+/**
+ * @brief MMC handle Structure definition
+ */
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+typedef struct __MMC_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */
+{
+ MMC_TypeDef *Instance; /*!< MMC registers base address */
+
+ MMC_InitTypeDef Init; /*!< MMC required parameters */
+
+ HAL_LockTypeDef Lock; /*!< MMC locking object */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to MMC Tx transfer Buffer */
+
+ uint32_t TxXferSize; /*!< MMC Tx Transfer size */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to MMC Rx transfer Buffer */
+
+ uint32_t RxXferSize; /*!< MMC Rx Transfer size */
+
+ __IO uint32_t Context; /*!< MMC transfer context */
+
+ __IO HAL_MMC_StateTypeDef State; /*!< MMC card State */
+
+ __IO uint32_t ErrorCode; /*!< MMC Card Error codes */
+
+ HAL_MMC_CardInfoTypeDef MmcCard; /*!< MMC Card information */
+
+ uint32_t CSD[4U]; /*!< MMC card specific data table */
+
+ uint32_t CID[4U]; /*!< MMC card identification number table */
+
+ uint32_t Ext_CSD[128];
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+ void (* TxCpltCallback) (struct __MMC_HandleTypeDef *hmmc);
+ void (* RxCpltCallback) (struct __MMC_HandleTypeDef *hmmc);
+ void (* ErrorCallback) (struct __MMC_HandleTypeDef *hmmc);
+ void (* AbortCpltCallback) (struct __MMC_HandleTypeDef *hmmc);
+ void (* Read_DMADblBuf0CpltCallback) (struct __MMC_HandleTypeDef *hmmc);
+ void (* Read_DMADblBuf1CpltCallback) (struct __MMC_HandleTypeDef *hmmc);
+ void (* Write_DMADblBuf0CpltCallback) (struct __MMC_HandleTypeDef *hmmc);
+ void (* Write_DMADblBuf1CpltCallback) (struct __MMC_HandleTypeDef *hmmc);
+
+ void (* MspInitCallback) (struct __MMC_HandleTypeDef *hmmc);
+ void (* MspDeInitCallback) (struct __MMC_HandleTypeDef *hmmc);
+#endif
+}MMC_HandleTypeDef;
+
+
+/**
+ * @}
+ */
+
+/** @defgroup MMC_Exported_Types_Group4 Card Specific Data: CSD Register
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t CSDStruct; /*!< CSD structure */
+ __IO uint8_t SysSpecVersion; /*!< System specification version */
+ __IO uint8_t Reserved1; /*!< Reserved */
+ __IO uint8_t TAAC; /*!< Data read access time 1 */
+ __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
+ __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
+ __IO uint16_t CardComdClasses; /*!< Card command classes */
+ __IO uint8_t RdBlockLen; /*!< Max. read data block length */
+ __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
+ __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
+ __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
+ __IO uint8_t DSRImpl; /*!< DSR implemented */
+ __IO uint8_t Reserved2; /*!< Reserved */
+ __IO uint32_t DeviceSize; /*!< Device Size */
+ __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
+ __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
+ __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
+ __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
+ __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
+ __IO uint8_t EraseGrSize; /*!< Erase group size */
+ __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
+ __IO uint8_t WrProtectGrSize; /*!< Write protect group size */
+ __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
+ __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
+ __IO uint8_t WrSpeedFact; /*!< Write speed factor */
+ __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
+ __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
+ __IO uint8_t Reserved3; /*!< Reserved */
+ __IO uint8_t ContentProtectAppli; /*!< Content protection application */
+ __IO uint8_t FileFormatGroup; /*!< File format group */
+ __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
+ __IO uint8_t PermWrProtect; /*!< Permanent write protection */
+ __IO uint8_t TempWrProtect; /*!< Temporary write protection */
+ __IO uint8_t FileFormat; /*!< File format */
+ __IO uint8_t ECC; /*!< ECC code */
+ __IO uint8_t CSD_CRC; /*!< CSD CRC */
+ __IO uint8_t Reserved4; /*!< Always 1 */
+
+}HAL_MMC_CardCSDTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup MMC_Exported_Types_Group5 Card Identification Data: CID Register
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t ManufacturerID; /*!< Manufacturer ID */
+ __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
+ __IO uint32_t ProdName1; /*!< Product Name part1 */
+ __IO uint8_t ProdName2; /*!< Product Name part2 */
+ __IO uint8_t ProdRev; /*!< Product Revision */
+ __IO uint32_t ProdSN; /*!< Product Serial Number */
+ __IO uint8_t Reserved1; /*!< Reserved1 */
+ __IO uint16_t ManufactDate; /*!< Manufacturing Date */
+ __IO uint8_t CID_CRC; /*!< CID CRC */
+ __IO uint8_t Reserved2; /*!< Always 1 */
+
+}HAL_MMC_CardCIDTypeDef;
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+/** @defgroup MMC_Exported_Types_Group6 MMC Callback ID enumeration definition
+ * @{
+ */
+typedef enum
+{
+ HAL_MMC_TX_CPLT_CB_ID = 0x00U, /*!< MMC Tx Complete Callback ID */
+ HAL_MMC_RX_CPLT_CB_ID = 0x01U, /*!< MMC Rx Complete Callback ID */
+ HAL_MMC_ERROR_CB_ID = 0x02U, /*!< MMC Error Callback ID */
+ HAL_MMC_ABORT_CB_ID = 0x03U, /*!< MMC Abort Callback ID */
+ HAL_MMC_READ_DMA_DBL_BUF0_CPLT_CB_ID = 0x04U, /*!< MMC Rx DMA Double Buffer 0 Complete Callback ID */
+ HAL_MMC_READ_DMA_DBL_BUF1_CPLT_CB_ID = 0x05U, /*!< MMC Rx DMA Double Buffer 1 Complete Callback ID */
+ HAL_MMC_WRITE_DMA_DBL_BUF0_CPLT_CB_ID = 0x06U, /*!< MMC Tx DMA Double Buffer 0 Complete Callback ID */
+ HAL_MMC_WRITE_DMA_DBL_BUF1_CPLT_CB_ID = 0x07U, /*!< MMC Tx DMA Double Buffer 1 Complete Callback ID */
+
+ HAL_MMC_MSP_INIT_CB_ID = 0x10U, /*!< MMC MspInit Callback ID */
+ HAL_MMC_MSP_DEINIT_CB_ID = 0x11U /*!< MMC MspDeInit Callback ID */
+}HAL_MMC_CallbackIDTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup MMC_Exported_Types_Group7 MMC Callback pointer definition
+ * @{
+ */
+typedef void (*pMMC_CallbackTypeDef) (MMC_HandleTypeDef *hmmc);
+/**
+ * @}
+ */
+#endif
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup MMC_Exported_Constants Exported Constants
+ * @{
+ */
+
+#define MMC_BLOCKSIZE ((uint32_t)512U) /*!< Block size is 512 bytes */
+
+/** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition
+ * @{
+ */
+#define HAL_MMC_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */
+#define HAL_MMC_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */
+#define HAL_MMC_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */
+#define HAL_MMC_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */
+#define HAL_MMC_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */
+#define HAL_MMC_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */
+#define HAL_MMC_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */
+#define HAL_MMC_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */
+#define HAL_MMC_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the
+ number of transferred bytes does not match the block length */
+#define HAL_MMC_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */
+#define HAL_MMC_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */
+#define HAL_MMC_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */
+#define HAL_MMC_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock
+ command or if there was an attempt to access a locked card */
+#define HAL_MMC_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */
+#define HAL_MMC_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */
+#define HAL_MMC_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */
+#define HAL_MMC_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */
+#define HAL_MMC_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */
+#define HAL_MMC_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */
+#define HAL_MMC_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */
+#define HAL_MMC_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */
+#define HAL_MMC_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */
+#define HAL_MMC_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */
+#define HAL_MMC_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out
+ of erase sequence command was received */
+#define HAL_MMC_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */
+#define HAL_MMC_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */
+#define HAL_MMC_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */
+#define HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */
+#define HAL_MMC_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */
+#define HAL_MMC_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */
+#define HAL_MMC_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */
+#define HAL_MMC_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */
+#define HAL_MMC_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+#define HAL_MMC_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration
+ * @{
+ */
+#define MMC_CONTEXT_NONE ((uint32_t)0x00000000U) /*!< None */
+#define MMC_CONTEXT_READ_SINGLE_BLOCK ((uint32_t)0x00000001U) /*!< Read single block operation */
+#define MMC_CONTEXT_READ_MULTIPLE_BLOCK ((uint32_t)0x00000002U) /*!< Read multiple blocks operation */
+#define MMC_CONTEXT_WRITE_SINGLE_BLOCK ((uint32_t)0x00000010U) /*!< Write single block operation */
+#define MMC_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U) /*!< Write multiple blocks operation */
+#define MMC_CONTEXT_IT ((uint32_t)0x00000008U) /*!< Process in Interrupt mode */
+#define MMC_CONTEXT_DMA ((uint32_t)0x00000080U) /*!< Process in DMA mode */
+
+/**
+ * @}
+ */
+
+/** @defgroup MMC_Exported_Constansts_Group3 MMC Voltage mode
+ * @{
+ */
+/**
+ * @brief
+ */
+#define MMC_HIGH_VOLTAGE_RANGE 0x80FF8000U /*!< VALUE OF ARGUMENT */
+#define MMC_DUAL_VOLTAGE_RANGE 0x80FF8080U /*!< VALUE OF ARGUMENT */
+#define eMMC_HIGH_VOLTAGE_RANGE 0xC0FF8000U /*!< for eMMC > 2Gb sector mode */
+#define eMMC_DUAL_VOLTAGE_RANGE 0xC0FF8080U /*!< for eMMC > 2Gb sector mode */
+#define MMC_INVALID_VOLTAGE_RANGE 0x0001FF01U
+/**
+ * @}
+ */
+
+/** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards
+ * @{
+ */
+#define MMC_LOW_CAPACITY_CARD ((uint32_t)0x00000000U) /*!< MMC Card Capacity <=2Gbytes */
+#define MMC_HIGH_CAPACITY_CARD ((uint32_t)0x00000001U) /*!< MMC Card Capacity >2Gbytes and <2Tbytes */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup MMC_Exported_macros MMC Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+/** @brief Reset MMC handle state.
+ * @param __HANDLE__ MMC Handle.
+ * @retval None
+ */
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+#define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__) do { \
+ (__HANDLE__)->State = HAL_MMC_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_MMC_STATE_RESET)
+#endif
+
+/**
+ * @brief Enable the MMC device interrupt.
+ * @param __HANDLE__ MMC Handle.
+ * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
+ * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt
+ * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt
+ * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt
+ * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt
+ * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
+ * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt
+ * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt
+ * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt
+ * @retval None
+ */
+#define __HAL_MMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Disable the MMC device interrupt.
+ * @param __HANDLE__ MMC Handle.
+ * @param __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
+ * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt
+ * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt
+ * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt
+ * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt
+ * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
+ * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt
+ * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt
+ * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt
+ * @retval None
+ */
+#define __HAL_MMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified MMC flag is set or not.
+ * @param __HANDLE__ MMC Handle.
+ * @param __FLAG__ specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDMMC_FLAG_DTIMEOUT: Data timeout
+ * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
+ * @arg SDMMC_FLAG_DHOLD: Data transfer Hold
+ * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12
+ * @arg SDMMC_FLAG_DPSMACT: Data path state machine active
+ * @arg SDMMC_FLAG_CPSMACT: Command path state machine active
+ * @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDMMC_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDMMC_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDMMC_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDMMC_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDMMC_FLAG_BUSYD0: Inverted value of SDMMC_D0 line (Busy)
+ * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected
+ * @arg SDMMC_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received
+ * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout
+ * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion
+ * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure
+ * @arg SDMMC_FLAG_IDMATE: IDMA transfer error
+ * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete
+ * @retval The new state of MMC FLAG (SET or RESET).
+ */
+#define __HAL_MMC_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Clear the MMC's pending flags.
+ * @param __HANDLE__ MMC Handle.
+ * @param __FLAG__ specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDMMC_FLAG_DTIMEOUT: Data timeout
+ * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
+ * @arg SDMMC_FLAG_DHOLD: Data transfer Hold
+ * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12
+ * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected
+ * @arg SDMMC_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received
+ * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout
+ * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion
+ * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure
+ * @arg SDMMC_FLAG_IDMATE: IDMA transfer error
+ * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete
+ * @retval None
+ */
+#define __HAL_MMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Check whether the specified MMC interrupt has occurred or not.
+ * @param __HANDLE__ MMC Handle.
+ * @param __INTERRUPT__ specifies the SDMMC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
+ * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt
+ * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt
+ * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt
+ * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt
+ * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
+ * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt
+ * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt
+ * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt
+ * @retval The new state of MMC IT (SET or RESET).
+ */
+#define __HAL_MMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Clear the MMC's interrupt pending bits.
+ * @param __HANDLE__ MMC Handle.
+ * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
+ * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt
+ * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt
+ * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt
+ * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt
+ * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
+ * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt
+ * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt
+ * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt
+ * @retval None
+ */
+#define __HAL_MMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDMMC_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Include MMC HAL Extension module */
+#include "stm32h7xx_hal_mmc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup MMC_Exported_Functions MMC Exported Functions
+ * @{
+ */
+
+/** @defgroup MMC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc);
+HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc);
+HAL_StatusTypeDef HAL_MMC_DeInit (MMC_HandleTypeDef *hmmc);
+void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc);
+void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc);
+
+/**
+ * @}
+ */
+
+/** @defgroup MMC_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
+HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
+HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
+/* Non-Blocking mode: IT */
+HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+
+void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc);
+
+/* Callback in non blocking modes (DMA) */
+void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc);
+void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc);
+void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc);
+void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc);
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+/* MMC callback registering/unregistering */
+HAL_StatusTypeDef HAL_MMC_RegisterCallback (MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId, pMMC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_MMC_UnRegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId);
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup MMC_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode);
+HAL_StatusTypeDef HAL_MMC_ConfigSpeedBusOperation(MMC_HandleTypeDef *hmmc, uint32_t SpeedMode);
+/**
+ * @}
+ */
+
+/** @defgroup MMC_Exported_Functions_Group4 MMC card related functions
+ * @{
+ */
+HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc);
+HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID);
+HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD);
+HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo);
+/**
+ * @}
+ */
+
+/** @defgroup MMC_Exported_Functions_Group5 Peripheral State and Errors functions
+ * @{
+ */
+HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc);
+uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc);
+/**
+ * @}
+ */
+
+/** @defgroup MMC_Exported_Functions_Group6 Perioheral Abort management
+ * @{
+ */
+HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc);
+HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc);
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup MMC_Private_Types MMC Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup MMC_Private_Defines MMC Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup MMC_Private_Variables MMC Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup MMC_Private_Constants MMC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup MMC_Private_Macros MMC Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup MMC_Private_Functions_Prototypes MMC Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup MMC_Private_Functions MMC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32H7xx_HAL_MMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|