diff options
Diffstat (limited to 'bsps/arm/stm32h7/hal/stm32h7xx_hal_dsi.c')
| -rw-r--r-- | bsps/arm/stm32h7/hal/stm32h7xx_hal_dsi.c | 2705 |
1 files changed, 2705 insertions, 0 deletions
diff --git a/bsps/arm/stm32h7/hal/stm32h7xx_hal_dsi.c b/bsps/arm/stm32h7/hal/stm32h7xx_hal_dsi.c new file mode 100644 index 0000000000..badc634835 --- /dev/null +++ b/bsps/arm/stm32h7/hal/stm32h7xx_hal_dsi.c @@ -0,0 +1,2705 @@ +/**
+ ******************************************************************************
+ * @file stm32h7xx_hal_dsi.c
+ * @author MCD Application Team
+ * @brief DSI HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the DSI peripheral:
+ * + Initialization and de-initialization functions
+ * + IO operation functions
+ * + Peripheral Control functions
+ * + Peripheral State and Errors functions
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ (#) Use @ref HAL_DSI_Init() function to initialize the DSI Host IP and program the required
+ PLL parameters, number of lanes and TX Escape clock divider.
+ (#) Use @ref HAL_DSI_ConfigAdaptedCommandMode() function to configure the DSI host in adapted
+ command mode.
+ (#) When operating in video mode , use @ref HAL_DSI_ConfigVideoMode() to configure the DSI host.
+ (#) Function @ref HAL_DSI_ConfigCommand() is used to configure the DSI commands behavior in low power mode.
+ (#) To configure the DSI PHY timings parameters, use function @ref HAL_DSI_ConfigPhyTimer().
+ (#) The DSI Host can be started/stopped using respectively functions @ref HAL_DSI_Start() and @ref HAL_DSI_Stop().
+ Functions @ref HAL_DSI_ShortWrite(), @ref HAL_DSI_LongWrite() and @ref HAL_DSI_Read() allows respectively
+ to write DSI short packets, long packets and to read DSI packets.
+
+ (#) The DSI Host Offers two Low power modes :
+ (+) Low Power Mode on data lanes only: Only DSI data lanes are shut down.
+ It is possible to enter/exit from this mode using respectively functions @ref HAL_DSI_EnterULPMData()
+ and @ref HAL_DSI_ExitULPMData()
+
+ (+) Low Power Mode on data and clock lanes : All DSI lanes are shut down including data and clock lanes.
+ It is possible to enter/exit from this mode using respectively functions @ref HAL_DSI_EnterULPM()
+ and @ref HAL_DSI_ExitULPM()
+
+ (#) User can select the DSI errors to be reported/monitored using function @ref HAL_DSI_ConfigErrorMonitor()
+ When an error occurs, the callback @ref HAL_DSI_ErrorCallback() is asserted and then user can retrieve
+ the error code by calling function @ref HAL_DSI_GetError()
+
+ (#) To control DSI state you can use the following function: HAL_DSI_GetState()
+
+ *** DSI HAL driver macros list ***
+ =============================================
+ [..]
+ Below the list of most used macros in DSI HAL driver.
+
+ (+) __HAL_DSI_ENABLE: Enable the DSI Host.
+ (+) __HAL_DSI_DISABLE: Disable the DSI Host.
+ (+) __HAL_DSI_WRAPPER_ENABLE: Enables the DSI wrapper.
+ (+) __HAL_DSI_WRAPPER_DISABLE: Disable the DSI wrapper.
+ (+) __HAL_DSI_PLL_ENABLE: Enables the DSI PLL.
+ (+) __HAL_DSI_PLL_DISABLE: Disables the DSI PLL.
+ (+) __HAL_DSI_REG_ENABLE: Enables the DSI regulator.
+ (+) __HAL_DSI_REG_DISABLE: Disables the DSI regulator.
+ (+) __HAL_DSI_GET_FLAG: Get the DSI pending flags.
+ (+) __HAL_DSI_CLEAR_FLAG: Clears the DSI pending flags.
+ (+) __HAL_DSI_ENABLE_IT: Enables the specified DSI interrupts.
+ (+) __HAL_DSI_DISABLE_IT: Disables the specified DSI interrupts.
+ (+) __HAL_DSI_GET_IT_SOURCE: Checks whether the specified DSI interrupt source is enabled or not.
+
+
+
+ *** Callback registration ***
+ =============================================
+
+ The compilation define USE_HAL_DSI_REGISTER_CALLBACKS when set to 1
+ allows the user to configure dynamically the driver callbacks.
+ Use Function @ref HAL_DSI_RegisterCallback() to register a callback.
+
+ Function @ref HAL_DSI_RegisterCallback() allows to register following callbacks:
+ (+) TearingEffectCallback : DSI Tearing Effect Callback.
+ (+) EndOfRefreshCallback : DSI End Of Refresh Callback.
+ (+) ErrorCallback : DSI Error Callback
+ (+) MspInitCallback : DSI MspInit.
+ (+) MspDeInitCallback : DSI MspDeInit.
+ This function takes as parameters the HAL peripheral handle, the Callback ID
+ and a pointer to the user callback function.
+
+ Use function @ref HAL_DSI_UnRegisterCallback() to reset a callback to the default
+ weak function.
+ @ref HAL_DSI_UnRegisterCallback takes as parameters the HAL peripheral handle,
+ and the Callback ID.
+ This function allows to reset following callbacks:
+ (+) TearingEffectCallback : DSI Tearing Effect Callback.
+ (+) EndOfRefreshCallback : DSI End Of Refresh Callback.
+ (+) ErrorCallback : DSI Error Callback
+ (+) MspInitCallback : DSI MspInit.
+ (+) MspDeInitCallback : DSI MspDeInit.
+
+ By default, after the HAL_DSI_Init and when the state is HAL_DSI_STATE_RESET
+ all callbacks are set to the corresponding weak functions:
+ examples @ref HAL_DSI_TearingEffectCallback(), @ref HAL_DSI_EndOfRefreshCallback().
+ Exception done for MspInit and MspDeInit functions that are
+ reset to the legacy weak function in the HAL_DSI_Init/ @ref HAL_DSI_DeInit only when
+ these callbacks are null (not registered beforehand).
+ if not, MspInit or MspDeInit are not null, the @ref HAL_DSI_Init/ @ref HAL_DSI_DeInit
+ keep and use the user MspInit/MspDeInit callbacks (registered beforehand)
+
+ Callbacks can be registered/unregistered in HAL_DSI_STATE_READY state only.
+ Exception done MspInit/MspDeInit that can be registered/unregistered
+ in HAL_DSI_STATE_READY or HAL_DSI_STATE_RESET state,
+ thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
+ In that case first register the MspInit/MspDeInit user callbacks
+ using @ref HAL_DSI_RegisterCallback() before calling @ref HAL_DSI_DeInit
+ or HAL_DSI_Init function.
+
+ When The compilation define USE_HAL_DSI_REGISTER_CALLBACKS is set to 0 or
+ not defined, the callback registration feature is not available and all callbacks
+ are set to the corresponding weak functions.
+
+ [..]
+ (@) You can refer to the DSI HAL driver header file for more useful macros
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+ * @{
+ */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+
+#if defined(DSI)
+
+/** @addtogroup DSI
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @addtogroup DSI_Private_Constants
+ * @{
+ */
+#define DSI_TIMEOUT_VALUE ((uint32_t)1000U) /* 1s */
+
+#define DSI_ERROR_ACK_MASK (DSI_ISR0_AE0 | DSI_ISR0_AE1 | DSI_ISR0_AE2 | DSI_ISR0_AE3 | \
+ DSI_ISR0_AE4 | DSI_ISR0_AE5 | DSI_ISR0_AE6 | DSI_ISR0_AE7 | \
+ DSI_ISR0_AE8 | DSI_ISR0_AE9 | DSI_ISR0_AE10 | DSI_ISR0_AE11 | \
+ DSI_ISR0_AE12 | DSI_ISR0_AE13 | DSI_ISR0_AE14 | DSI_ISR0_AE15)
+#define DSI_ERROR_PHY_MASK (DSI_ISR0_PE0 | DSI_ISR0_PE1 | DSI_ISR0_PE2 | DSI_ISR0_PE3 | DSI_ISR0_PE4)
+#define DSI_ERROR_TX_MASK DSI_ISR1_TOHSTX
+#define DSI_ERROR_RX_MASK DSI_ISR1_TOLPRX
+#define DSI_ERROR_ECC_MASK (DSI_ISR1_ECCSE | DSI_ISR1_ECCME)
+#define DSI_ERROR_CRC_MASK DSI_ISR1_CRCE
+#define DSI_ERROR_PSE_MASK DSI_ISR1_PSE
+#define DSI_ERROR_EOT_MASK DSI_ISR1_EOTPE
+#define DSI_ERROR_OVF_MASK DSI_ISR1_LPWRE
+#define DSI_ERROR_GEN_MASK (DSI_ISR1_GCWRE | DSI_ISR1_GPWRE | DSI_ISR1_GPTXE | DSI_ISR1_GPRDE | DSI_ISR1_GPRXE)
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void DSI_ConfigPacketHeader(DSI_TypeDef *DSIx, uint32_t ChannelID, uint32_t DataType, uint32_t Data0,
+ uint32_t Data1);
+
+static HAL_StatusTypeDef DSI_ShortWrite(DSI_HandleTypeDef *hdsi,
+ uint32_t ChannelID,
+ uint32_t Mode,
+ uint32_t Param1,
+ uint32_t Param2);
+
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @brief Generic DSI packet header configuration
+ * @param DSIx Pointer to DSI register base
+ * @param ChannelID Virtual channel ID of the header packet
+ * @param DataType Packet data type of the header packet
+ * This parameter can be any value of :
+ * @arg DSI_SHORT_WRITE_PKT_Data_Type
+ * @arg DSI_LONG_WRITE_PKT_Data_Type
+ * @arg DSI_SHORT_READ_PKT_Data_Type
+ * @arg DSI_MAX_RETURN_PKT_SIZE
+ * @param Data0 Word count LSB
+ * @param Data1 Word count MSB
+ * @retval None
+ */
+static void DSI_ConfigPacketHeader(DSI_TypeDef *DSIx,
+ uint32_t ChannelID,
+ uint32_t DataType,
+ uint32_t Data0,
+ uint32_t Data1)
+{
+ /* Update the DSI packet header with new information */
+ DSIx->GHCR = (DataType | (ChannelID << 6U) | (Data0 << 8U) | (Data1 << 16U));
+}
+
+/**
+ * @brief write short DCS or short Generic command
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param ChannelID Virtual channel ID.
+ * @param Mode DSI short packet data type.
+ * This parameter can be any value of @arg DSI_SHORT_WRITE_PKT_Data_Type.
+ * @param Param1 DSC command or first generic parameter.
+ * This parameter can be any value of @arg DSI_DCS_Command or a
+ * generic command code.
+ * @param Param2 DSC parameter or second generic parameter.
+ * @retval HAL status
+ */
+static HAL_StatusTypeDef DSI_ShortWrite(DSI_HandleTypeDef *hdsi,
+ uint32_t ChannelID,
+ uint32_t Mode,
+ uint32_t Param1,
+ uint32_t Param2)
+{
+ uint32_t tickstart;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for Command FIFO Empty */
+ while((hdsi->Instance->GPSR & DSI_GPSR_CMDFE) == 0U)
+ {
+ /* Check for the Timeout */
+ if((HAL_GetTick() - tickstart ) > DSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the packet to send a short DCS command with 0 or 1 parameter */
+ /* Update the DSI packet header with new information */
+ hdsi->Instance->GHCR = (Mode | (ChannelID << 6U) | (Param1 << 8U) | (Param2 << 16U));
+
+ return HAL_OK;
+}
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DSI_Exported_Functions
+ * @{
+ */
+
+/** @defgroup DSI_Group1 Initialization and Configuration functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Initialization and Configuration functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Initialize and configure the DSI
+ (+) De-initialize the DSI
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the DSI according to the specified
+ * parameters in the DSI_InitTypeDef and create the associated handle.
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param PLLInit pointer to a DSI_PLLInitTypeDef structure that contains
+ * the PLL Clock structure definition for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_Init(DSI_HandleTypeDef *hdsi, DSI_PLLInitTypeDef *PLLInit)
+{
+ uint32_t tickstart;
+ uint32_t unitIntervalx4;
+ uint32_t tempIDF;
+
+ /* Check the DSI handle allocation */
+ if (hdsi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Check function parameters */
+ assert_param(IS_DSI_PLL_NDIV(PLLInit->PLLNDIV));
+ assert_param(IS_DSI_PLL_IDF(PLLInit->PLLIDF));
+ assert_param(IS_DSI_PLL_ODF(PLLInit->PLLODF));
+ assert_param(IS_DSI_AUTO_CLKLANE_CONTROL(hdsi->Init.AutomaticClockLaneControl));
+ assert_param(IS_DSI_NUMBER_OF_LANES(hdsi->Init.NumberOfLanes));
+
+#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1)
+ if (hdsi->State == HAL_DSI_STATE_RESET)
+ {
+ /* Reset the DSI callback to the legacy weak callbacks */
+ hdsi->TearingEffectCallback = HAL_DSI_TearingEffectCallback; /* Legacy weak TearingEffectCallback */
+ hdsi->EndOfRefreshCallback = HAL_DSI_EndOfRefreshCallback; /* Legacy weak EndOfRefreshCallback */
+ hdsi->ErrorCallback = HAL_DSI_ErrorCallback; /* Legacy weak ErrorCallback */
+
+ if (hdsi->MspInitCallback == NULL)
+ {
+ hdsi->MspInitCallback = HAL_DSI_MspInit;
+ }
+ /* Initialize the low level hardware */
+ hdsi->MspInitCallback(hdsi);
+ }
+#else
+ if (hdsi->State == HAL_DSI_STATE_RESET)
+ {
+ /* Initialize the low level hardware */
+ HAL_DSI_MspInit(hdsi);
+ }
+#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */
+
+ /* Change DSI peripheral state */
+ hdsi->State = HAL_DSI_STATE_BUSY;
+
+ /**************** Turn on the regulator and enable the DSI PLL ****************/
+
+ /* Enable the regulator */
+ __HAL_DSI_REG_ENABLE(hdsi);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until the regulator is ready */
+ while (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_RRS) == 0U)
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the PLL division factors */
+ hdsi->Instance->WRPCR &= ~(DSI_WRPCR_PLL_NDIV | DSI_WRPCR_PLL_IDF | DSI_WRPCR_PLL_ODF);
+ hdsi->Instance->WRPCR |= (((PLLInit->PLLNDIV) << 2U) | ((PLLInit->PLLIDF) << 11U) | ((PLLInit->PLLODF) << 16U));
+
+ /* Enable the DSI PLL */
+ __HAL_DSI_PLL_ENABLE(hdsi);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for the lock of the PLL */
+ while (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == 0U)
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /*************************** Set the PHY parameters ***************************/
+
+ /* D-PHY clock and digital enable*/
+ hdsi->Instance->PCTLR |= (DSI_PCTLR_CKE | DSI_PCTLR_DEN);
+
+ /* Clock lane configuration */
+ hdsi->Instance->CLCR &= ~(DSI_CLCR_DPCC | DSI_CLCR_ACR);
+ hdsi->Instance->CLCR |= (DSI_CLCR_DPCC | hdsi->Init.AutomaticClockLaneControl);
+
+ /* Configure the number of active data lanes */
+ hdsi->Instance->PCONFR &= ~DSI_PCONFR_NL;
+ hdsi->Instance->PCONFR |= hdsi->Init.NumberOfLanes;
+
+ /************************ Set the DSI clock parameters ************************/
+
+ /* Set the TX escape clock division factor */
+ hdsi->Instance->CCR &= ~DSI_CCR_TXECKDIV;
+ hdsi->Instance->CCR |= hdsi->Init.TXEscapeCkdiv;
+
+ /* Calculate the bit period in high-speed mode in unit of 0.25 ns (UIX4) */
+ /* The equation is : UIX4 = IntegerPart( (1000/F_PHY_Mhz) * 4 ) */
+ /* Where : F_PHY_Mhz = (NDIV * HSE_Mhz) / (IDF * ODF) */
+ tempIDF = (PLLInit->PLLIDF > 0U) ? PLLInit->PLLIDF : 1U;
+ unitIntervalx4 = (4000000U * tempIDF * ((1UL << (0x3U & PLLInit->PLLODF)))) / ((HSE_VALUE / 1000U) * PLLInit->PLLNDIV);
+
+ /* Set the bit period in high-speed mode */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_UIX4;
+ hdsi->Instance->WPCR[0U] |= unitIntervalx4;
+
+ /****************************** Error management *****************************/
+
+ /* Disable all error interrupts and reset the Error Mask */
+ hdsi->Instance->IER[0U] = 0U;
+ hdsi->Instance->IER[1U] = 0U;
+ hdsi->ErrorMsk = 0U;
+
+ /* Initialise the error code */
+ hdsi->ErrorCode = HAL_DSI_ERROR_NONE;
+
+ /* Initialize the DSI state*/
+ hdsi->State = HAL_DSI_STATE_READY;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief De-initializes the DSI peripheral registers to their default reset
+ * values.
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_DeInit(DSI_HandleTypeDef *hdsi)
+{
+ /* Check the DSI handle allocation */
+ if (hdsi == NULL)
+ {
+ return HAL_ERROR;
+ }
+
+ /* Change DSI peripheral state */
+ hdsi->State = HAL_DSI_STATE_BUSY;
+
+ /* Disable the DSI wrapper */
+ __HAL_DSI_WRAPPER_DISABLE(hdsi);
+
+ /* Disable the DSI host */
+ __HAL_DSI_DISABLE(hdsi);
+
+ /* D-PHY clock and digital disable */
+ hdsi->Instance->PCTLR &= ~(DSI_PCTLR_CKE | DSI_PCTLR_DEN);
+
+ /* Turn off the DSI PLL */
+ __HAL_DSI_PLL_DISABLE(hdsi);
+
+ /* Disable the regulator */
+ __HAL_DSI_REG_DISABLE(hdsi);
+
+#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1)
+ if (hdsi->MspDeInitCallback == NULL)
+ {
+ hdsi->MspDeInitCallback = HAL_DSI_MspDeInit;
+ }
+ /* DeInit the low level hardware */
+ hdsi->MspDeInitCallback(hdsi);
+#else
+ /* DeInit the low level hardware */
+ HAL_DSI_MspDeInit(hdsi);
+#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */
+
+ /* Initialise the error code */
+ hdsi->ErrorCode = HAL_DSI_ERROR_NONE;
+
+ /* Initialize the DSI state*/
+ hdsi->State = HAL_DSI_STATE_RESET;
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable the error monitor flags
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param ActiveErrors indicates which error interrupts will be enabled.
+ * This parameter can be any combination of @arg DSI_Error_Data_Type.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigErrorMonitor(DSI_HandleTypeDef *hdsi, uint32_t ActiveErrors)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ hdsi->Instance->IER[0U] = 0U;
+ hdsi->Instance->IER[1U] = 0U;
+
+ /* Store active errors to the handle */
+ hdsi->ErrorMsk = ActiveErrors;
+
+ if ((ActiveErrors & HAL_DSI_ERROR_ACK) != 0U)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[0U] |= DSI_ERROR_ACK_MASK;
+ }
+
+ if ((ActiveErrors & HAL_DSI_ERROR_PHY) != 0U)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[0U] |= DSI_ERROR_PHY_MASK;
+ }
+
+ if ((ActiveErrors & HAL_DSI_ERROR_TX) != 0U)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_TX_MASK;
+ }
+
+ if ((ActiveErrors & HAL_DSI_ERROR_RX) != 0U)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_RX_MASK;
+ }
+
+ if ((ActiveErrors & HAL_DSI_ERROR_ECC) != 0U)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_ECC_MASK;
+ }
+
+ if ((ActiveErrors & HAL_DSI_ERROR_CRC) != 0U)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_CRC_MASK;
+ }
+
+ if ((ActiveErrors & HAL_DSI_ERROR_PSE) != 0U)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_PSE_MASK;
+ }
+
+ if ((ActiveErrors & HAL_DSI_ERROR_EOT) != 0U)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_EOT_MASK;
+ }
+
+ if ((ActiveErrors & HAL_DSI_ERROR_OVF) != 0U)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_OVF_MASK;
+ }
+
+ if ((ActiveErrors & HAL_DSI_ERROR_GEN) != 0U)
+ {
+ /* Enable the interrupt generation on selected errors */
+ hdsi->Instance->IER[1U] |= DSI_ERROR_GEN_MASK;
+ }
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the DSI MSP.
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval None
+ */
+__weak void HAL_DSI_MspInit(DSI_HandleTypeDef *hdsi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdsi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DSI_MspInit could be implemented in the user file
+ */
+}
+
+/**
+ * @brief De-initializes the DSI MSP.
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval None
+ */
+__weak void HAL_DSI_MspDeInit(DSI_HandleTypeDef *hdsi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdsi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DSI_MspDeInit could be implemented in the user file
+ */
+}
+
+#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1)
+/**
+ * @brief Register a User DSI Callback
+ * To be used instead of the weak predefined callback
+ * @param hdsi dsi handle
+ * @param CallbackID ID of the callback to be registered
+ * This parameter can be one of the following values:
+ * @arg HAL_DSI_TEARING_EFFECT_CB_ID Tearing Effect Callback ID
+ * @arg HAL_DSI_ENDOF_REFRESH_CB_ID End Of Refresh Callback ID
+ * @arg HAL_DSI_ERROR_CB_ID Error Callback ID
+ * @arg HAL_DSI_MSPINIT_CB_ID MspInit callback ID
+ * @arg HAL_DSI_MSPDEINIT_CB_ID MspDeInit callback ID
+ * @param pCallback pointer to the Callback function
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_DSI_RegisterCallback(DSI_HandleTypeDef *hdsi, HAL_DSI_CallbackIDTypeDef CallbackID,
+ pDSI_CallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if (pCallback == NULL)
+ {
+ /* Update the error code */
+ hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK;
+
+ return HAL_ERROR;
+ }
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ if (hdsi->State == HAL_DSI_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DSI_TEARING_EFFECT_CB_ID :
+ hdsi->TearingEffectCallback = pCallback;
+ break;
+
+ case HAL_DSI_ENDOF_REFRESH_CB_ID :
+ hdsi->EndOfRefreshCallback = pCallback;
+ break;
+
+ case HAL_DSI_ERROR_CB_ID :
+ hdsi->ErrorCallback = pCallback;
+ break;
+
+ case HAL_DSI_MSPINIT_CB_ID :
+ hdsi->MspInitCallback = pCallback;
+ break;
+
+ case HAL_DSI_MSPDEINIT_CB_ID :
+ hdsi->MspDeInitCallback = pCallback;
+ break;
+
+ default :
+ /* Update the error code */
+ hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (hdsi->State == HAL_DSI_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DSI_MSPINIT_CB_ID :
+ hdsi->MspInitCallback = pCallback;
+ break;
+
+ case HAL_DSI_MSPDEINIT_CB_ID :
+ hdsi->MspDeInitCallback = pCallback;
+ break;
+
+ default :
+ /* Update the error code */
+ hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdsi);
+
+ return status;
+}
+
+/**
+ * @brief Unregister a DSI Callback
+ * DSI callabck is redirected to the weak predefined callback
+ * @param hdsi dsi handle
+ * @param CallbackID ID of the callback to be unregistered
+ * This parameter can be one of the following values:
+ * @arg HAL_DSI_TEARING_EFFECT_CB_ID Tearing Effect Callback ID
+ * @arg HAL_DSI_ENDOF_REFRESH_CB_ID End Of Refresh Callback ID
+ * @arg HAL_DSI_ERROR_CB_ID Error Callback ID
+ * @arg HAL_DSI_MSPINIT_CB_ID MspInit callback ID
+ * @arg HAL_DSI_MSPDEINIT_CB_ID MspDeInit callback ID
+ * @retval status
+ */
+HAL_StatusTypeDef HAL_DSI_UnRegisterCallback(DSI_HandleTypeDef *hdsi, HAL_DSI_CallbackIDTypeDef CallbackID)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ if (hdsi->State == HAL_DSI_STATE_READY)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DSI_TEARING_EFFECT_CB_ID :
+ hdsi->TearingEffectCallback = HAL_DSI_TearingEffectCallback; /* Legacy weak TearingEffectCallback */
+ break;
+
+ case HAL_DSI_ENDOF_REFRESH_CB_ID :
+ hdsi->EndOfRefreshCallback = HAL_DSI_EndOfRefreshCallback; /* Legacy weak EndOfRefreshCallback */
+ break;
+
+ case HAL_DSI_ERROR_CB_ID :
+ hdsi->ErrorCallback = HAL_DSI_ErrorCallback; /* Legacy weak ErrorCallback */
+ break;
+
+ case HAL_DSI_MSPINIT_CB_ID :
+ hdsi->MspInitCallback = HAL_DSI_MspInit; /* Legcay weak MspInit Callback */
+ break;
+
+ case HAL_DSI_MSPDEINIT_CB_ID :
+ hdsi->MspDeInitCallback = HAL_DSI_MspDeInit; /* Legcay weak MspDeInit Callback */
+ break;
+
+ default :
+ /* Update the error code */
+ hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else if (hdsi->State == HAL_DSI_STATE_RESET)
+ {
+ switch (CallbackID)
+ {
+ case HAL_DSI_MSPINIT_CB_ID :
+ hdsi->MspInitCallback = HAL_DSI_MspInit; /* Legcay weak MspInit Callback */
+ break;
+
+ case HAL_DSI_MSPDEINIT_CB_ID :
+ hdsi->MspDeInitCallback = HAL_DSI_MspDeInit; /* Legcay weak MspDeInit Callback */
+ break;
+
+ default :
+ /* Update the error code */
+ hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
+ }
+ }
+ else
+ {
+ /* Update the error code */
+ hdsi->ErrorCode |= HAL_DSI_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(hdsi);
+
+ return status;
+}
+#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Group2 IO operation functions
+ * @brief IO operation functions
+ *
+@verbatim
+ ===============================================================================
+ ##### IO operation functions #####
+ ===============================================================================
+ [..] This section provides function allowing to:
+ (+) Handle DSI interrupt request
+
+@endverbatim
+ * @{
+ */
+/**
+ * @brief Handles DSI interrupt request.
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+void HAL_DSI_IRQHandler(DSI_HandleTypeDef *hdsi)
+{
+ uint32_t ErrorStatus0, ErrorStatus1;
+
+ /* Tearing Effect Interrupt management ***************************************/
+ if (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_TE) != 0U)
+ {
+ if (__HAL_DSI_GET_IT_SOURCE(hdsi, DSI_IT_TE) != 0U)
+ {
+ /* Clear the Tearing Effect Interrupt Flag */
+ __HAL_DSI_CLEAR_FLAG(hdsi, DSI_FLAG_TE);
+
+ /* Tearing Effect Callback */
+#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1)
+ /*Call registered Tearing Effect callback */
+ hdsi->TearingEffectCallback(hdsi);
+#else
+ /*Call legacy Tearing Effect callback*/
+ HAL_DSI_TearingEffectCallback(hdsi);
+#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */
+ }
+ }
+
+ /* End of Refresh Interrupt management ***************************************/
+ if (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_ER) != 0U)
+ {
+ if (__HAL_DSI_GET_IT_SOURCE(hdsi, DSI_IT_ER) != 0U)
+ {
+ /* Clear the End of Refresh Interrupt Flag */
+ __HAL_DSI_CLEAR_FLAG(hdsi, DSI_FLAG_ER);
+
+ /* End of Refresh Callback */
+#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1)
+ /*Call registered End of refresh callback */
+ hdsi->EndOfRefreshCallback(hdsi);
+#else
+ /*Call Legacy End of refresh callback */
+ HAL_DSI_EndOfRefreshCallback(hdsi);
+#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */
+ }
+ }
+
+ /* Error Interrupts management ***********************************************/
+ if (hdsi->ErrorMsk != 0U)
+ {
+ ErrorStatus0 = hdsi->Instance->ISR[0U];
+ ErrorStatus0 &= hdsi->Instance->IER[0U];
+ ErrorStatus1 = hdsi->Instance->ISR[1U];
+ ErrorStatus1 &= hdsi->Instance->IER[1U];
+
+ if ((ErrorStatus0 & DSI_ERROR_ACK_MASK) != 0U)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_ACK;
+ }
+
+ if ((ErrorStatus0 & DSI_ERROR_PHY_MASK) != 0U)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_PHY;
+ }
+
+ if ((ErrorStatus1 & DSI_ERROR_TX_MASK) != 0U)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_TX;
+ }
+
+ if ((ErrorStatus1 & DSI_ERROR_RX_MASK) != 0U)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_RX;
+ }
+
+ if ((ErrorStatus1 & DSI_ERROR_ECC_MASK) != 0U)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_ECC;
+ }
+
+ if ((ErrorStatus1 & DSI_ERROR_CRC_MASK) != 0U)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_CRC;
+ }
+
+ if ((ErrorStatus1 & DSI_ERROR_PSE_MASK) != 0U)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_PSE;
+ }
+
+ if ((ErrorStatus1 & DSI_ERROR_EOT_MASK) != 0U)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_EOT;
+ }
+
+ if ((ErrorStatus1 & DSI_ERROR_OVF_MASK) != 0U)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_OVF;
+ }
+
+ if ((ErrorStatus1 & DSI_ERROR_GEN_MASK) != 0U)
+ {
+ hdsi->ErrorCode |= HAL_DSI_ERROR_GEN;
+ }
+
+ /* Check only selected errors */
+ if (hdsi->ErrorCode != HAL_DSI_ERROR_NONE)
+ {
+ /* DSI error interrupt callback */
+#if (USE_HAL_DSI_REGISTER_CALLBACKS == 1)
+ /*Call registered Error callback */
+ hdsi->ErrorCallback(hdsi);
+#else
+ /*Call Legacy Error callback */
+ HAL_DSI_ErrorCallback(hdsi);
+#endif /* USE_HAL_DSI_REGISTER_CALLBACKS */
+ }
+ }
+}
+
+/**
+ * @brief Tearing Effect DSI callback.
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval None
+ */
+__weak void HAL_DSI_TearingEffectCallback(DSI_HandleTypeDef *hdsi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdsi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DSI_TearingEffectCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief End of Refresh DSI callback.
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval None
+ */
+__weak void HAL_DSI_EndOfRefreshCallback(DSI_HandleTypeDef *hdsi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdsi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DSI_EndOfRefreshCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @brief Operation Error DSI callback.
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval None
+ */
+__weak void HAL_DSI_ErrorCallback(DSI_HandleTypeDef *hdsi)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(hdsi);
+ /* NOTE : This function Should not be modified, when the callback is needed,
+ the HAL_DSI_ErrorCallback could be implemented in the user file
+ */
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure the Generic interface read-back Virtual Channel ID
+ (+) Select video mode and configure the corresponding parameters
+ (+) Configure command transmission mode: High-speed or Low-power
+ (+) Configure the flow control
+ (+) Configure the DSI PHY timer
+ (+) Configure the DSI HOST timeout
+ (+) Configure the DSI HOST timeout
+ (+) Start/Stop the DSI module
+ (+) Refresh the display in command mode
+ (+) Controls the display color mode in Video mode
+ (+) Control the display shutdown in Video mode
+ (+) write short DCS or short Generic command
+ (+) write long DCS or long Generic command
+ (+) Read command (DCS or generic)
+ (+) Enter/Exit the Ultra Low Power Mode on data only (D-PHY PLL running)
+ (+) Enter/Exit the Ultra Low Power Mode on data only and clock (D-PHY PLL turned off)
+ (+) Start/Stop test pattern generation
+ (+) Slew-Rate And Delay Tuning
+ (+) Low-Power Reception Filter Tuning
+ (+) Activate an additional current path on all lanes to meet the SDDTx parameter
+ (+) Custom lane pins configuration
+ (+) Set custom timing for the PHY
+ (+) Force the Clock/Data Lane in TX Stop Mode
+ (+) Force LP Receiver in Low-Power Mode
+ (+) Force Data Lanes in RX Mode after a BTA
+ (+) Enable a pull-down on the lanes to prevent from floating states when unused
+ (+) Switch off the contention detection on data lanes
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configure the Generic interface read-back Virtual Channel ID.
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param VirtualChannelID Virtual channel ID
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetGenericVCID(DSI_HandleTypeDef *hdsi, uint32_t VirtualChannelID)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Update the GVCID register */
+ hdsi->Instance->GVCIDR &= ~DSI_GVCIDR_VCID;
+ hdsi->Instance->GVCIDR |= VirtualChannelID;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Select video mode and configure the corresponding parameters
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param VidCfg pointer to a DSI_VidCfgTypeDef structure that contains
+ * the DSI video mode configuration parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigVideoMode(DSI_HandleTypeDef *hdsi, DSI_VidCfgTypeDef *VidCfg)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_COLOR_CODING(VidCfg->ColorCoding));
+ assert_param(IS_DSI_VIDEO_MODE_TYPE(VidCfg->Mode));
+ assert_param(IS_DSI_LP_COMMAND(VidCfg->LPCommandEnable));
+ assert_param(IS_DSI_LP_HFP(VidCfg->LPHorizontalFrontPorchEnable));
+ assert_param(IS_DSI_LP_HBP(VidCfg->LPHorizontalBackPorchEnable));
+ assert_param(IS_DSI_LP_VACTIVE(VidCfg->LPVerticalActiveEnable));
+ assert_param(IS_DSI_LP_VFP(VidCfg->LPVerticalFrontPorchEnable));
+ assert_param(IS_DSI_LP_VBP(VidCfg->LPVerticalBackPorchEnable));
+ assert_param(IS_DSI_LP_VSYNC(VidCfg->LPVerticalSyncActiveEnable));
+ assert_param(IS_DSI_FBTAA(VidCfg->FrameBTAAcknowledgeEnable));
+ assert_param(IS_DSI_DE_POLARITY(VidCfg->DEPolarity));
+ assert_param(IS_DSI_VSYNC_POLARITY(VidCfg->VSPolarity));
+ assert_param(IS_DSI_HSYNC_POLARITY(VidCfg->HSPolarity));
+ /* Check the LooselyPacked variant only in 18-bit mode */
+ if (VidCfg->ColorCoding == DSI_RGB666)
+ {
+ assert_param(IS_DSI_LOOSELY_PACKED(VidCfg->LooselyPacked));
+ }
+
+ /* Select video mode by resetting CMDM and DSIM bits */
+ hdsi->Instance->MCR &= ~DSI_MCR_CMDM;
+ hdsi->Instance->WCFGR &= ~DSI_WCFGR_DSIM;
+
+ /* Configure the video mode transmission type */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_VMT;
+ hdsi->Instance->VMCR |= VidCfg->Mode;
+
+ /* Configure the video packet size */
+ hdsi->Instance->VPCR &= ~DSI_VPCR_VPSIZE;
+ hdsi->Instance->VPCR |= VidCfg->PacketSize;
+
+ /* Set the chunks number to be transmitted through the DSI link */
+ hdsi->Instance->VCCR &= ~DSI_VCCR_NUMC;
+ hdsi->Instance->VCCR |= VidCfg->NumberOfChunks;
+
+ /* Set the size of the null packet */
+ hdsi->Instance->VNPCR &= ~DSI_VNPCR_NPSIZE;
+ hdsi->Instance->VNPCR |= VidCfg->NullPacketSize;
+
+ /* Select the virtual channel for the LTDC interface traffic */
+ hdsi->Instance->LVCIDR &= ~DSI_LVCIDR_VCID;
+ hdsi->Instance->LVCIDR |= VidCfg->VirtualChannelID;
+
+ /* Configure the polarity of control signals */
+ hdsi->Instance->LPCR &= ~(DSI_LPCR_DEP | DSI_LPCR_VSP | DSI_LPCR_HSP);
+ hdsi->Instance->LPCR |= (VidCfg->DEPolarity | VidCfg->VSPolarity | VidCfg->HSPolarity);
+
+ /* Select the color coding for the host */
+ hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_COLC;
+ hdsi->Instance->LCOLCR |= VidCfg->ColorCoding;
+
+ /* Select the color coding for the wrapper */
+ hdsi->Instance->WCFGR &= ~DSI_WCFGR_COLMUX;
+ hdsi->Instance->WCFGR |= ((VidCfg->ColorCoding) << 1U);
+
+ /* Enable/disable the loosely packed variant to 18-bit configuration */
+ if (VidCfg->ColorCoding == DSI_RGB666)
+ {
+ hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_LPE;
+ hdsi->Instance->LCOLCR |= VidCfg->LooselyPacked;
+ }
+
+ /* Set the Horizontal Synchronization Active (HSA) in lane byte clock cycles */
+ hdsi->Instance->VHSACR &= ~DSI_VHSACR_HSA;
+ hdsi->Instance->VHSACR |= VidCfg->HorizontalSyncActive;
+
+ /* Set the Horizontal Back Porch (HBP) in lane byte clock cycles */
+ hdsi->Instance->VHBPCR &= ~DSI_VHBPCR_HBP;
+ hdsi->Instance->VHBPCR |= VidCfg->HorizontalBackPorch;
+
+ /* Set the total line time (HLINE=HSA+HBP+HACT+HFP) in lane byte clock cycles */
+ hdsi->Instance->VLCR &= ~DSI_VLCR_HLINE;
+ hdsi->Instance->VLCR |= VidCfg->HorizontalLine;
+
+ /* Set the Vertical Synchronization Active (VSA) */
+ hdsi->Instance->VVSACR &= ~DSI_VVSACR_VSA;
+ hdsi->Instance->VVSACR |= VidCfg->VerticalSyncActive;
+
+ /* Set the Vertical Back Porch (VBP)*/
+ hdsi->Instance->VVBPCR &= ~DSI_VVBPCR_VBP;
+ hdsi->Instance->VVBPCR |= VidCfg->VerticalBackPorch;
+
+ /* Set the Vertical Front Porch (VFP)*/
+ hdsi->Instance->VVFPCR &= ~DSI_VVFPCR_VFP;
+ hdsi->Instance->VVFPCR |= VidCfg->VerticalFrontPorch;
+
+ /* Set the Vertical Active period*/
+ hdsi->Instance->VVACR &= ~DSI_VVACR_VA;
+ hdsi->Instance->VVACR |= VidCfg->VerticalActive;
+
+ /* Configure the command transmission mode */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPCE;
+ hdsi->Instance->VMCR |= VidCfg->LPCommandEnable;
+
+ /* Low power largest packet size */
+ hdsi->Instance->LPMCR &= ~DSI_LPMCR_LPSIZE;
+ hdsi->Instance->LPMCR |= ((VidCfg->LPLargestPacketSize) << 16U);
+
+ /* Low power VACT largest packet size */
+ hdsi->Instance->LPMCR &= ~DSI_LPMCR_VLPSIZE;
+ hdsi->Instance->LPMCR |= VidCfg->LPVACTLargestPacketSize;
+
+ /* Enable LP transition in HFP period */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPHFPE;
+ hdsi->Instance->VMCR |= VidCfg->LPHorizontalFrontPorchEnable;
+
+ /* Enable LP transition in HBP period */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPHBPE;
+ hdsi->Instance->VMCR |= VidCfg->LPHorizontalBackPorchEnable;
+
+ /* Enable LP transition in VACT period */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPVAE;
+ hdsi->Instance->VMCR |= VidCfg->LPVerticalActiveEnable;
+
+ /* Enable LP transition in VFP period */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPVFPE;
+ hdsi->Instance->VMCR |= VidCfg->LPVerticalFrontPorchEnable;
+
+ /* Enable LP transition in VBP period */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPVBPE;
+ hdsi->Instance->VMCR |= VidCfg->LPVerticalBackPorchEnable;
+
+ /* Enable LP transition in vertical sync period */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_LPVSAE;
+ hdsi->Instance->VMCR |= VidCfg->LPVerticalSyncActiveEnable;
+
+ /* Enable the request for an acknowledge response at the end of a frame */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_FBTAAE;
+ hdsi->Instance->VMCR |= VidCfg->FrameBTAAcknowledgeEnable;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Select adapted command mode and configure the corresponding parameters
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param CmdCfg pointer to a DSI_CmdCfgTypeDef structure that contains
+ * the DSI command mode configuration parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigAdaptedCommandMode(DSI_HandleTypeDef *hdsi, DSI_CmdCfgTypeDef *CmdCfg)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_COLOR_CODING(CmdCfg->ColorCoding));
+ assert_param(IS_DSI_TE_SOURCE(CmdCfg->TearingEffectSource));
+ assert_param(IS_DSI_TE_POLARITY(CmdCfg->TearingEffectPolarity));
+ assert_param(IS_DSI_AUTOMATIC_REFRESH(CmdCfg->AutomaticRefresh));
+ assert_param(IS_DSI_VS_POLARITY(CmdCfg->VSyncPol));
+ assert_param(IS_DSI_TE_ACK_REQUEST(CmdCfg->TEAcknowledgeRequest));
+ assert_param(IS_DSI_DE_POLARITY(CmdCfg->DEPolarity));
+ assert_param(IS_DSI_VSYNC_POLARITY(CmdCfg->VSPolarity));
+ assert_param(IS_DSI_HSYNC_POLARITY(CmdCfg->HSPolarity));
+
+ /* Select command mode by setting CMDM and DSIM bits */
+ hdsi->Instance->MCR |= DSI_MCR_CMDM;
+ hdsi->Instance->WCFGR &= ~DSI_WCFGR_DSIM;
+ hdsi->Instance->WCFGR |= DSI_WCFGR_DSIM;
+
+ /* Select the virtual channel for the LTDC interface traffic */
+ hdsi->Instance->LVCIDR &= ~DSI_LVCIDR_VCID;
+ hdsi->Instance->LVCIDR |= CmdCfg->VirtualChannelID;
+
+ /* Configure the polarity of control signals */
+ hdsi->Instance->LPCR &= ~(DSI_LPCR_DEP | DSI_LPCR_VSP | DSI_LPCR_HSP);
+ hdsi->Instance->LPCR |= (CmdCfg->DEPolarity | CmdCfg->VSPolarity | CmdCfg->HSPolarity);
+
+ /* Select the color coding for the host */
+ hdsi->Instance->LCOLCR &= ~DSI_LCOLCR_COLC;
+ hdsi->Instance->LCOLCR |= CmdCfg->ColorCoding;
+
+ /* Select the color coding for the wrapper */
+ hdsi->Instance->WCFGR &= ~DSI_WCFGR_COLMUX;
+ hdsi->Instance->WCFGR |= ((CmdCfg->ColorCoding) << 1U);
+
+ /* Configure the maximum allowed size for write memory command */
+ hdsi->Instance->LCCR &= ~DSI_LCCR_CMDSIZE;
+ hdsi->Instance->LCCR |= CmdCfg->CommandSize;
+
+ /* Configure the tearing effect source and polarity and select the refresh mode */
+ hdsi->Instance->WCFGR &= ~(DSI_WCFGR_TESRC | DSI_WCFGR_TEPOL | DSI_WCFGR_AR | DSI_WCFGR_VSPOL);
+ hdsi->Instance->WCFGR |= (CmdCfg->TearingEffectSource | CmdCfg->TearingEffectPolarity | CmdCfg->AutomaticRefresh |
+ CmdCfg->VSyncPol);
+
+ /* Configure the tearing effect acknowledge request */
+ hdsi->Instance->CMCR &= ~DSI_CMCR_TEARE;
+ hdsi->Instance->CMCR |= CmdCfg->TEAcknowledgeRequest;
+
+ /* Enable the Tearing Effect interrupt */
+ __HAL_DSI_ENABLE_IT(hdsi, DSI_IT_TE);
+
+ /* Enable the End of Refresh interrupt */
+ __HAL_DSI_ENABLE_IT(hdsi, DSI_IT_ER);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure command transmission mode: High-speed or Low-power
+ * and enable/disable acknowledge request after packet transmission
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param LPCmd pointer to a DSI_LPCmdTypeDef structure that contains
+ * the DSI command transmission mode configuration parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigCommand(DSI_HandleTypeDef *hdsi, DSI_LPCmdTypeDef *LPCmd)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ assert_param(IS_DSI_LP_GSW0P(LPCmd->LPGenShortWriteNoP));
+ assert_param(IS_DSI_LP_GSW1P(LPCmd->LPGenShortWriteOneP));
+ assert_param(IS_DSI_LP_GSW2P(LPCmd->LPGenShortWriteTwoP));
+ assert_param(IS_DSI_LP_GSR0P(LPCmd->LPGenShortReadNoP));
+ assert_param(IS_DSI_LP_GSR1P(LPCmd->LPGenShortReadOneP));
+ assert_param(IS_DSI_LP_GSR2P(LPCmd->LPGenShortReadTwoP));
+ assert_param(IS_DSI_LP_GLW(LPCmd->LPGenLongWrite));
+ assert_param(IS_DSI_LP_DSW0P(LPCmd->LPDcsShortWriteNoP));
+ assert_param(IS_DSI_LP_DSW1P(LPCmd->LPDcsShortWriteOneP));
+ assert_param(IS_DSI_LP_DSR0P(LPCmd->LPDcsShortReadNoP));
+ assert_param(IS_DSI_LP_DLW(LPCmd->LPDcsLongWrite));
+ assert_param(IS_DSI_LP_MRDP(LPCmd->LPMaxReadPacket));
+ assert_param(IS_DSI_ACK_REQUEST(LPCmd->AcknowledgeRequest));
+
+ /* Select High-speed or Low-power for command transmission */
+ hdsi->Instance->CMCR &= ~(DSI_CMCR_GSW0TX | \
+ DSI_CMCR_GSW1TX | \
+ DSI_CMCR_GSW2TX | \
+ DSI_CMCR_GSR0TX | \
+ DSI_CMCR_GSR1TX | \
+ DSI_CMCR_GSR2TX | \
+ DSI_CMCR_GLWTX | \
+ DSI_CMCR_DSW0TX | \
+ DSI_CMCR_DSW1TX | \
+ DSI_CMCR_DSR0TX | \
+ DSI_CMCR_DLWTX | \
+ DSI_CMCR_MRDPS);
+ hdsi->Instance->CMCR |= (LPCmd->LPGenShortWriteNoP | \
+ LPCmd->LPGenShortWriteOneP | \
+ LPCmd->LPGenShortWriteTwoP | \
+ LPCmd->LPGenShortReadNoP | \
+ LPCmd->LPGenShortReadOneP | \
+ LPCmd->LPGenShortReadTwoP | \
+ LPCmd->LPGenLongWrite | \
+ LPCmd->LPDcsShortWriteNoP | \
+ LPCmd->LPDcsShortWriteOneP | \
+ LPCmd->LPDcsShortReadNoP | \
+ LPCmd->LPDcsLongWrite | \
+ LPCmd->LPMaxReadPacket);
+
+ /* Configure the acknowledge request after each packet transmission */
+ hdsi->Instance->CMCR &= ~DSI_CMCR_ARE;
+ hdsi->Instance->CMCR |= LPCmd->AcknowledgeRequest;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the flow control parameters
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param FlowControl flow control feature(s) to be enabled.
+ * This parameter can be any combination of @arg DSI_FlowControl.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigFlowControl(DSI_HandleTypeDef *hdsi, uint32_t FlowControl)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_FLOW_CONTROL(FlowControl));
+
+ /* Set the DSI Host Protocol Configuration Register */
+ hdsi->Instance->PCR &= ~DSI_FLOW_CONTROL_ALL;
+ hdsi->Instance->PCR |= FlowControl;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the DSI PHY timer parameters
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param PhyTimers DSI_PHY_TimerTypeDef structure that contains
+ * the DSI PHY timing parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigPhyTimer(DSI_HandleTypeDef *hdsi, DSI_PHY_TimerTypeDef *PhyTimers)
+{
+ uint32_t maxTime;
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ maxTime = (PhyTimers->ClockLaneLP2HSTime > PhyTimers->ClockLaneHS2LPTime) ? PhyTimers->ClockLaneLP2HSTime :
+ PhyTimers->ClockLaneHS2LPTime;
+
+ /* Clock lane timer configuration */
+
+ /* In Automatic Clock Lane control mode, the DSI Host can turn off the clock lane between two
+ High-Speed transmission.
+ To do so, the DSI Host calculates the time required for the clock lane to change from HighSpeed
+ to Low-Power and from Low-Power to High-Speed.
+ This timings are configured by the HS2LP_TIME and LP2HS_TIME in the DSI Host Clock Lane Timer Configuration Register (DSI_CLTCR).
+ But the DSI Host is not calculating LP2HS_TIME + HS2LP_TIME but 2 x HS2LP_TIME.
+
+ Workaround : Configure HS2LP_TIME and LP2HS_TIME with the same value being the max of HS2LP_TIME or LP2HS_TIME.
+ */
+ hdsi->Instance->CLTCR &= ~(DSI_CLTCR_LP2HS_TIME | DSI_CLTCR_HS2LP_TIME);
+ hdsi->Instance->CLTCR |= (maxTime | ((maxTime) << 16U));
+
+ /* Data lane timer configuration */
+ hdsi->Instance->DLTCR &= ~(DSI_DLTCR_MRD_TIME | DSI_DLTCR_LP2HS_TIME | DSI_DLTCR_HS2LP_TIME);
+ hdsi->Instance->DLTCR |= (PhyTimers->DataLaneMaxReadTime | ((PhyTimers->DataLaneLP2HSTime) << 16U) | ((
+ PhyTimers->DataLaneHS2LPTime) << 24U));
+
+ /* Configure the wait period to request HS transmission after a stop state */
+ hdsi->Instance->PCONFR &= ~DSI_PCONFR_SW_TIME;
+ hdsi->Instance->PCONFR |= ((PhyTimers->StopWaitTime) << 8U);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Configure the DSI HOST timeout parameters
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param HostTimeouts DSI_HOST_TimeoutTypeDef structure that contains
+ * the DSI host timeout parameters
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ConfigHostTimeouts(DSI_HandleTypeDef *hdsi, DSI_HOST_TimeoutTypeDef *HostTimeouts)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Set the timeout clock division factor */
+ hdsi->Instance->CCR &= ~DSI_CCR_TOCKDIV;
+ hdsi->Instance->CCR |= ((HostTimeouts->TimeoutCkdiv) << 8U);
+
+ /* High-speed transmission timeout */
+ hdsi->Instance->TCCR[0U] &= ~DSI_TCCR0_HSTX_TOCNT;
+ hdsi->Instance->TCCR[0U] |= ((HostTimeouts->HighSpeedTransmissionTimeout) << 16U);
+
+ /* Low-power reception timeout */
+ hdsi->Instance->TCCR[0U] &= ~DSI_TCCR0_LPRX_TOCNT;
+ hdsi->Instance->TCCR[0U] |= HostTimeouts->LowPowerReceptionTimeout;
+
+ /* High-speed read timeout */
+ hdsi->Instance->TCCR[1U] &= ~DSI_TCCR1_HSRD_TOCNT;
+ hdsi->Instance->TCCR[1U] |= HostTimeouts->HighSpeedReadTimeout;
+
+ /* Low-power read timeout */
+ hdsi->Instance->TCCR[2U] &= ~DSI_TCCR2_LPRD_TOCNT;
+ hdsi->Instance->TCCR[2U] |= HostTimeouts->LowPowerReadTimeout;
+
+ /* High-speed write timeout */
+ hdsi->Instance->TCCR[3U] &= ~DSI_TCCR3_HSWR_TOCNT;
+ hdsi->Instance->TCCR[3U] |= HostTimeouts->HighSpeedWriteTimeout;
+
+ /* High-speed write presp mode */
+ hdsi->Instance->TCCR[3U] &= ~DSI_TCCR3_PM;
+ hdsi->Instance->TCCR[3U] |= HostTimeouts->HighSpeedWritePrespMode;
+
+ /* Low-speed write timeout */
+ hdsi->Instance->TCCR[4U] &= ~DSI_TCCR4_LPWR_TOCNT;
+ hdsi->Instance->TCCR[4U] |= HostTimeouts->LowPowerWriteTimeout;
+
+ /* BTA timeout */
+ hdsi->Instance->TCCR[5U] &= ~DSI_TCCR5_BTA_TOCNT;
+ hdsi->Instance->TCCR[5U] |= HostTimeouts->BTATimeout;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start the DSI module
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_Start(DSI_HandleTypeDef *hdsi)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Enable the DSI host */
+ __HAL_DSI_ENABLE(hdsi);
+
+ /* Enable the DSI wrapper */
+ __HAL_DSI_WRAPPER_ENABLE(hdsi);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop the DSI module
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_Stop(DSI_HandleTypeDef *hdsi)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Disable the DSI host */
+ __HAL_DSI_DISABLE(hdsi);
+
+ /* Disable the DSI wrapper */
+ __HAL_DSI_WRAPPER_DISABLE(hdsi);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Refresh the display in command mode
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_Refresh(DSI_HandleTypeDef *hdsi)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Update the display */
+ hdsi->Instance->WCR |= DSI_WCR_LTDCEN;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Controls the display color mode in Video mode
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param ColorMode Color mode (full or 8-colors).
+ * This parameter can be any value of @arg DSI_Color_Mode
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ColorMode(DSI_HandleTypeDef *hdsi, uint32_t ColorMode)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_COLOR_MODE(ColorMode));
+
+ /* Update the display color mode */
+ hdsi->Instance->WCR &= ~DSI_WCR_COLM;
+ hdsi->Instance->WCR |= ColorMode;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Control the display shutdown in Video mode
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param Shutdown Shut-down (Display-ON or Display-OFF).
+ * This parameter can be any value of @arg DSI_ShutDown
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_Shutdown(DSI_HandleTypeDef *hdsi, uint32_t Shutdown)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_SHUT_DOWN(Shutdown));
+
+ /* Update the display Shutdown */
+ hdsi->Instance->WCR &= ~DSI_WCR_SHTDN;
+ hdsi->Instance->WCR |= Shutdown;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief write short DCS or short Generic command
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param ChannelID Virtual channel ID.
+ * @param Mode DSI short packet data type.
+ * This parameter can be any value of @arg DSI_SHORT_WRITE_PKT_Data_Type.
+ * @param Param1 DSC command or first generic parameter.
+ * This parameter can be any value of @arg DSI_DCS_Command or a
+ * generic command code.
+ * @param Param2 DSC parameter or second generic parameter.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ShortWrite(DSI_HandleTypeDef *hdsi,
+ uint32_t ChannelID,
+ uint32_t Mode,
+ uint32_t Param1,
+ uint32_t Param2)
+{
+ HAL_StatusTypeDef status;
+ /* Check the parameters */
+ assert_param(IS_DSI_SHORT_WRITE_PACKET_TYPE(Mode));
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ status = DSI_ShortWrite(hdsi, ChannelID, Mode, Param1, Param2);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return status;
+}
+
+/**
+ * @brief write long DCS or long Generic command
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param ChannelID Virtual channel ID.
+ * @param Mode DSI long packet data type.
+ * This parameter can be any value of @arg DSI_LONG_WRITE_PKT_Data_Type.
+ * @param NbParams Number of parameters.
+ * @param Param1 DSC command or first generic parameter.
+ * This parameter can be any value of @arg DSI_DCS_Command or a
+ * generic command code
+ * @param ParametersTable Pointer to parameter values table.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_LongWrite(DSI_HandleTypeDef *hdsi,
+ uint32_t ChannelID,
+ uint32_t Mode,
+ uint32_t NbParams,
+ uint32_t Param1,
+ uint8_t *ParametersTable)
+{
+ uint32_t uicounter, nbBytes, count;
+ uint32_t tickstart;
+ uint32_t fifoword;
+ uint8_t *pparams = ParametersTable;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_LONG_WRITE_PACKET_TYPE(Mode));
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for Command FIFO Empty */
+ while ((hdsi->Instance->GPSR & DSI_GPSR_CMDFE) == 0U)
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the DCS code on payload byte 1, and the other parameters on the write FIFO command*/
+ fifoword = Param1;
+ nbBytes = (NbParams < 3U) ? NbParams : 3U;
+
+ for (count = 0U; count < nbBytes; count++)
+ {
+ fifoword |= (((uint32_t)(*(pparams + count))) << (8U + (8U * count)));
+ }
+ hdsi->Instance->GPDR = fifoword;
+
+ uicounter = NbParams - nbBytes;
+ pparams += nbBytes;
+ /* Set the Next parameters on the write FIFO command*/
+ while (uicounter != 0U)
+ {
+ nbBytes = (uicounter < 4U) ? uicounter : 4U;
+ fifoword = 0U;
+ for (count = 0U; count < nbBytes; count++)
+ {
+ fifoword |= (((uint32_t)(*(pparams + count))) << (8U * count));
+ }
+ hdsi->Instance->GPDR = fifoword;
+
+ uicounter -= nbBytes;
+ pparams += nbBytes;
+ }
+
+ /* Configure the packet to send a long DCS command */
+ DSI_ConfigPacketHeader(hdsi->Instance,
+ ChannelID,
+ Mode,
+ ((NbParams + 1U) & 0x00FFU),
+ (((NbParams + 1U) & 0xFF00U) >> 8U));
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Read command (DCS or generic)
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param ChannelNbr Virtual channel ID
+ * @param Array pointer to a buffer to store the payload of a read back operation.
+ * @param Size Data size to be read (in byte).
+ * @param Mode DSI read packet data type.
+ * This parameter can be any value of @arg DSI_SHORT_READ_PKT_Data_Type.
+ * @param DCSCmd DCS get/read command.
+ * @param ParametersTable Pointer to parameter values table.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_Read(DSI_HandleTypeDef *hdsi,
+ uint32_t ChannelNbr,
+ uint8_t *Array,
+ uint32_t Size,
+ uint32_t Mode,
+ uint32_t DCSCmd,
+ uint8_t *ParametersTable)
+{
+ uint32_t tickstart;
+ uint8_t *pdata = Array;
+ uint32_t datasize = Size;
+ uint32_t fifoword;
+ uint32_t nbbytes;
+ uint32_t count;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check the parameters */
+ assert_param(IS_DSI_READ_PACKET_TYPE(Mode));
+
+ if (datasize > 2U)
+ {
+ /* set max return packet size */
+ if (DSI_ShortWrite(hdsi, ChannelNbr, DSI_MAX_RETURN_PKT_SIZE, ((datasize) & 0xFFU),
+ (((datasize) >> 8U) & 0xFFU)) != HAL_OK)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_ERROR;
+ }
+ }
+
+ /* Configure the packet to read command */
+ if (Mode == DSI_DCS_SHORT_PKT_READ)
+ {
+ DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, DCSCmd, 0U);
+ }
+ else if (Mode == DSI_GEN_SHORT_PKT_READ_P0)
+ {
+ DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, 0U, 0U);
+ }
+ else if (Mode == DSI_GEN_SHORT_PKT_READ_P1)
+ {
+ DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, ParametersTable[0U], 0U);
+ }
+ else if (Mode == DSI_GEN_SHORT_PKT_READ_P2)
+ {
+ DSI_ConfigPacketHeader(hdsi->Instance, ChannelNbr, Mode, ParametersTable[0U], ParametersTable[1U]);
+ }
+ else
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_ERROR;
+ }
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* If DSI fifo is not empty, read requested bytes */
+ while (((int32_t)(datasize)) > 0)
+ {
+ if ((hdsi->Instance->GPSR & DSI_GPSR_PRDFE) == 0U)
+ {
+ fifoword = hdsi->Instance->GPDR;
+ nbbytes = (datasize < 4U) ? datasize : 4U;
+
+ for (count = 0U; count < nbbytes; count++)
+ {
+ *pdata = (uint8_t)(fifoword >> (8U * count));
+ pdata++;
+ datasize--;
+ }
+ }
+
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enter the ULPM (Ultra Low Power Mode) with the D-PHY PLL running
+ * (only data lanes are in ULPM)
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_EnterULPMData(DSI_HandleTypeDef *hdsi)
+{
+ uint32_t tickstart;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* ULPS Request on Data Lanes */
+ hdsi->Instance->PUCR |= DSI_PUCR_URDL;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until the D-PHY active lanes enter into ULPM */
+ if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE)
+ {
+ while ((hdsi->Instance->PSR & DSI_PSR_UAN0) != 0U)
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES)
+ {
+ while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1)) != 0U)
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_ERROR;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Exit the ULPM (Ultra Low Power Mode) with the D-PHY PLL running
+ * (only data lanes are in ULPM)
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ExitULPMData(DSI_HandleTypeDef *hdsi)
+{
+ uint32_t tickstart;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Exit ULPS on Data Lanes */
+ hdsi->Instance->PUCR |= DSI_PUCR_UEDL;
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until all active lanes exit ULPM */
+ if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE)
+ {
+ while ((hdsi->Instance->PSR & DSI_PSR_UAN0) != DSI_PSR_UAN0)
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES)
+ {
+ while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1)) != (DSI_PSR_UAN0 | DSI_PSR_UAN1))
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_ERROR;
+ }
+
+ /* wait for 1 ms*/
+ HAL_Delay(1U);
+
+ /* De-assert the ULPM requests and the ULPM exit bits */
+ hdsi->Instance->PUCR = 0U;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enter the ULPM (Ultra Low Power Mode) with the D-PHY PLL turned off
+ * (both data and clock lanes are in ULPM)
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_EnterULPM(DSI_HandleTypeDef *hdsi)
+{
+ uint32_t tickstart;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Clock lane configuration: no more HS request */
+ hdsi->Instance->CLCR &= ~DSI_CLCR_DPCC;
+
+ /* Use system PLL as byte lane clock source before stopping DSIPHY clock source */
+ __HAL_RCC_DSI_CONFIG(RCC_DSICLKSOURCE_PLL2);
+
+ /* ULPS Request on Clock and Data Lanes */
+ hdsi->Instance->PUCR |= (DSI_PUCR_URCL | DSI_PUCR_URDL);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until all active lanes exit ULPM */
+ if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE)
+ {
+ while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UANC)) != 0U)
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES)
+ {
+ while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1 | DSI_PSR_UANC)) != 0U)
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_ERROR;
+ }
+
+ /* Turn off the DSI PLL */
+ __HAL_DSI_PLL_DISABLE(hdsi);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Exit the ULPM (Ultra Low Power Mode) with the D-PHY PLL turned off
+ * (both data and clock lanes are in ULPM)
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ExitULPM(DSI_HandleTypeDef *hdsi)
+{
+ uint32_t tickstart;
+
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Turn on the DSI PLL */
+ __HAL_DSI_PLL_ENABLE(hdsi);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait for the lock of the PLL */
+ while (__HAL_DSI_GET_FLAG(hdsi, DSI_FLAG_PLLLS) == 0U)
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Exit ULPS on Clock and Data Lanes */
+ hdsi->Instance->PUCR |= (DSI_PUCR_UECL | DSI_PUCR_UEDL);
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until all active lanes exit ULPM */
+ if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_ONE_DATA_LANE)
+ {
+ while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UANC)) != (DSI_PSR_UAN0 | DSI_PSR_UANC))
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if ((hdsi->Instance->PCONFR & DSI_PCONFR_NL) == DSI_TWO_DATA_LANES)
+ {
+ while ((hdsi->Instance->PSR & (DSI_PSR_UAN0 | DSI_PSR_UAN1 | DSI_PSR_UANC)) != (DSI_PSR_UAN0 | DSI_PSR_UAN1 |
+ DSI_PSR_UANC))
+ {
+ /* Check for the Timeout */
+ if ((HAL_GetTick() - tickstart) > DSI_TIMEOUT_VALUE)
+ {
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_ERROR;
+ }
+
+ /* wait for 1 ms */
+ HAL_Delay(1U);
+
+ /* De-assert the ULPM requests and the ULPM exit bits */
+ hdsi->Instance->PUCR = 0U;
+
+ /* Switch the lanbyteclock source in the RCC from system PLL to D-PHY */
+ __HAL_RCC_DSI_CONFIG(RCC_DSICLKSOURCE_PHY);
+
+ /* Restore clock lane configuration to HS */
+ hdsi->Instance->CLCR |= DSI_CLCR_DPCC;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start test pattern generation
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param Mode Pattern generator mode
+ * This parameter can be one of the following values:
+ * 0 : Color bars (horizontal or vertical)
+ * 1 : BER pattern (vertical only)
+ * @param Orientation Pattern generator orientation
+ * This parameter can be one of the following values:
+ * 0 : Vertical color bars
+ * 1 : Horizontal color bars
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_PatternGeneratorStart(DSI_HandleTypeDef *hdsi, uint32_t Mode, uint32_t Orientation)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Configure pattern generator mode and orientation */
+ hdsi->Instance->VMCR &= ~(DSI_VMCR_PGM | DSI_VMCR_PGO);
+ hdsi->Instance->VMCR |= ((Mode << 20U) | (Orientation << 24U));
+
+ /* Enable pattern generator by setting PGE bit */
+ hdsi->Instance->VMCR |= DSI_VMCR_PGE;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Stop test pattern generation
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_PatternGeneratorStop(DSI_HandleTypeDef *hdsi)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Disable pattern generator by clearing PGE bit */
+ hdsi->Instance->VMCR &= ~DSI_VMCR_PGE;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set Slew-Rate And Delay Tuning
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param CommDelay Communication delay to be adjusted.
+ * This parameter can be any value of @arg DSI_Communication_Delay
+ * @param Lane select between clock or data lanes.
+ * This parameter can be any value of @arg DSI_Lane_Group
+ * @param Value Custom value of the slew-rate or delay
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetSlewRateAndDelayTuning(DSI_HandleTypeDef *hdsi, uint32_t CommDelay, uint32_t Lane,
+ uint32_t Value)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_DSI_COMMUNICATION_DELAY(CommDelay));
+ assert_param(IS_DSI_LANE_GROUP(Lane));
+
+ switch (CommDelay)
+ {
+ case DSI_SLEW_RATE_HSTX:
+ if (Lane == DSI_CLOCK_LANE)
+ {
+ /* High-Speed Transmission Slew Rate Control on Clock Lane */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXSRCCL;
+ hdsi->Instance->WPCR[1U] |= Value << 16U;
+ }
+ else if (Lane == DSI_DATA_LANES)
+ {
+ /* High-Speed Transmission Slew Rate Control on Data Lanes */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXSRCDL;
+ hdsi->Instance->WPCR[1U] |= Value << 18U;
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_ERROR;
+ }
+ break;
+ case DSI_SLEW_RATE_LPTX:
+ if (Lane == DSI_CLOCK_LANE)
+ {
+ /* Low-Power transmission Slew Rate Compensation on Clock Lane */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPSRCCL;
+ hdsi->Instance->WPCR[1U] |= Value << 6U;
+ }
+ else if (Lane == DSI_DATA_LANES)
+ {
+ /* Low-Power transmission Slew Rate Compensation on Data Lanes */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPSRCDL;
+ hdsi->Instance->WPCR[1U] |= Value << 8U;
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_ERROR;
+ }
+ break;
+ case DSI_HS_DELAY:
+ if (Lane == DSI_CLOCK_LANE)
+ {
+ /* High-Speed Transmission Delay on Clock Lane */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXDCL;
+ hdsi->Instance->WPCR[1U] |= Value;
+ }
+ else if (Lane == DSI_DATA_LANES)
+ {
+ /* High-Speed Transmission Delay on Data Lanes */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_HSTXDDL;
+ hdsi->Instance->WPCR[1U] |= Value << 2U;
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_ERROR;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Low-Power Reception Filter Tuning
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param Frequency cutoff frequency of low-pass filter at the input of LPRX
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetLowPowerRXFilter(DSI_HandleTypeDef *hdsi, uint32_t Frequency)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Low-Power RX low-pass Filtering Tuning */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_LPRXFT;
+ hdsi->Instance->WPCR[1U] |= Frequency << 25U;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Activate an additional current path on all lanes to meet the SDDTx parameter
+ * defined in the MIPI D-PHY specification
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param State ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetSDD(DSI_HandleTypeDef *hdsi, FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ /* Activate/Disactivate additional current path on all lanes */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_SDDC;
+ hdsi->Instance->WPCR[1U] |= ((uint32_t)State << 12U);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Custom lane pins configuration
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param CustomLane Function to be applyed on selected lane.
+ * This parameter can be any value of @arg DSI_CustomLane
+ * @param Lane select between clock or data lane 0 or data lane 1.
+ * This parameter can be any value of @arg DSI_Lane_Select
+ * @param State ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetLanePinsConfiguration(DSI_HandleTypeDef *hdsi, uint32_t CustomLane, uint32_t Lane,
+ FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_DSI_CUSTOM_LANE(CustomLane));
+ assert_param(IS_DSI_LANE(Lane));
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ switch (CustomLane)
+ {
+ case DSI_SWAP_LANE_PINS:
+ if (Lane == DSI_CLK_LANE)
+ {
+ /* Swap pins on clock lane */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWCL;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 6U);
+ }
+ else if (Lane == DSI_DATA_LANE0)
+ {
+ /* Swap pins on data lane 0 */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWDL0;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 7U);
+ }
+ else if (Lane == DSI_DATA_LANE1)
+ {
+ /* Swap pins on data lane 1 */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_SWDL1;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 8U);
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_ERROR;
+ }
+ break;
+ case DSI_INVERT_HS_SIGNAL:
+ if (Lane == DSI_CLK_LANE)
+ {
+ /* Invert HS signal on clock lane */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSICL;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 9U);
+ }
+ else if (Lane == DSI_DATA_LANE0)
+ {
+ /* Invert HS signal on data lane 0 */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSIDL0;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 10U);
+ }
+ else if (Lane == DSI_DATA_LANE1)
+ {
+ /* Invert HS signal on data lane 1 */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_HSIDL1;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 11U);
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_ERROR;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Set custom timing for the PHY
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param Timing PHY timing to be adjusted.
+ * This parameter can be any value of @arg DSI_PHY_Timing
+ * @param State ENABLE or DISABLE
+ * @param Value Custom value of the timing
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetPHYTimings(DSI_HandleTypeDef *hdsi, uint32_t Timing, FunctionalState State, uint32_t Value)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_DSI_PHY_TIMING(Timing));
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ switch (Timing)
+ {
+ case DSI_TCLK_POST:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKPOSTEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 27U);
+
+ if (State != DISABLE)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[4U] &= ~DSI_WPCR4_TCLKPOST;
+ hdsi->Instance->WPCR[4U] |= Value & DSI_WPCR4_TCLKPOST;
+ }
+
+ break;
+ case DSI_TLPX_CLK:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TLPXCEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 26U);
+
+ if (State != DISABLE)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_TLPXC;
+ hdsi->Instance->WPCR[3U] |= (Value << 24U) & DSI_WPCR3_TLPXC;
+ }
+
+ break;
+ case DSI_THS_EXIT:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSEXITEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 25U);
+
+ if (State != DISABLE)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_THSEXIT;
+ hdsi->Instance->WPCR[3U] |= (Value << 16U) & DSI_WPCR3_THSEXIT;
+ }
+
+ break;
+ case DSI_TLPX_DATA:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TLPXDEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 24U);
+
+ if (State != DISABLE)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_TLPXD;
+ hdsi->Instance->WPCR[3U] |= (Value << 8U) & DSI_WPCR3_TLPXD;
+ }
+
+ break;
+ case DSI_THS_ZERO:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSZEROEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 23U);
+
+ if (State != DISABLE)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[3U] &= ~DSI_WPCR3_THSZERO;
+ hdsi->Instance->WPCR[3U] |= Value & DSI_WPCR3_THSZERO;
+ }
+
+ break;
+ case DSI_THS_TRAIL:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSTRAILEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 22U);
+
+ if (State != DISABLE)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_THSTRAIL;
+ hdsi->Instance->WPCR[2U] |= (Value << 24U) & DSI_WPCR2_THSTRAIL;
+ }
+
+ break;
+ case DSI_THS_PREPARE:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_THSPREPEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 21U);
+
+ if (State != DISABLE)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_THSPREP;
+ hdsi->Instance->WPCR[2U] |= (Value << 16U) & DSI_WPCR2_THSPREP;
+ }
+
+ break;
+ case DSI_TCLK_ZERO:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKZEROEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 20U);
+
+ if (State != DISABLE)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_TCLKZERO;
+ hdsi->Instance->WPCR[2U] |= (Value << 8U) & DSI_WPCR2_TCLKZERO;
+ }
+
+ break;
+ case DSI_TCLK_PREPARE:
+ /* Enable/Disable custom timing setting */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TCLKPREPEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 19U);
+
+ if (State != DISABLE)
+ {
+ /* Set custom value */
+ hdsi->Instance->WPCR[2U] &= ~DSI_WPCR2_TCLKPREP;
+ hdsi->Instance->WPCR[2U] |= Value & DSI_WPCR2_TCLKPREP;
+ }
+
+ break;
+ default:
+ break;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Force the Clock/Data Lane in TX Stop Mode
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param Lane select between clock or data lanes.
+ * This parameter can be any value of @arg DSI_Lane_Group
+ * @param State ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ForceTXStopMode(DSI_HandleTypeDef *hdsi, uint32_t Lane, FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_DSI_LANE_GROUP(Lane));
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ if (Lane == DSI_CLOCK_LANE)
+ {
+ /* Force/Unforce the Clock Lane in TX Stop Mode */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_FTXSMCL;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 12U);
+ }
+ else if (Lane == DSI_DATA_LANES)
+ {
+ /* Force/Unforce the Data Lanes in TX Stop Mode */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_FTXSMDL;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 13U);
+ }
+ else
+ {
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_ERROR;
+ }
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Force LP Receiver in Low-Power Mode
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param State ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ForceRXLowPower(DSI_HandleTypeDef *hdsi, FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ /* Force/Unforce LP Receiver in Low-Power Mode */
+ hdsi->Instance->WPCR[1U] &= ~DSI_WPCR1_FLPRXLPM;
+ hdsi->Instance->WPCR[1U] |= ((uint32_t)State << 22U);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Force Data Lanes in RX Mode after a BTA
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param State ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_ForceDataLanesInRX(DSI_HandleTypeDef *hdsi, FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ /* Force Data Lanes in RX Mode */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_TDDL;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 16U);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Enable a pull-down on the lanes to prevent from floating states when unused
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param State ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetPullDown(DSI_HandleTypeDef *hdsi, FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ /* Enable/Disable pull-down on lanes */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_PDEN;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 18U);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Switch off the contention detection on data lanes
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @param State ENABLE or DISABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DSI_SetContentionDetectionOff(DSI_HandleTypeDef *hdsi, FunctionalState State)
+{
+ /* Process locked */
+ __HAL_LOCK(hdsi);
+
+ /* Check function parameters */
+ assert_param(IS_FUNCTIONAL_STATE(State));
+
+ /* Contention Detection on Data Lanes OFF */
+ hdsi->Instance->WPCR[0U] &= ~DSI_WPCR0_CDOFFDL;
+ hdsi->Instance->WPCR[0U] |= ((uint32_t)State << 14U);
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdsi);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup DSI_Group4 Peripheral State and Errors functions
+ * @brief Peripheral State and Errors functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Peripheral State and Errors functions #####
+ ===============================================================================
+ [..]
+ This subsection provides functions allowing to
+ (+) Check the DSI state.
+ (+) Get error code.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Return the DSI state
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval HAL state
+ */
+HAL_DSI_StateTypeDef HAL_DSI_GetState(DSI_HandleTypeDef *hdsi)
+{
+ return hdsi->State;
+}
+
+/**
+ * @brief Return the DSI error code
+ * @param hdsi pointer to a DSI_HandleTypeDef structure that contains
+ * the configuration information for the DSI.
+ * @retval DSI Error Code
+ */
+uint32_t HAL_DSI_GetError(DSI_HandleTypeDef *hdsi)
+{
+ /* Get the error code */
+ return hdsi->ErrorCode;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* DSI */
+
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|