diff options
Diffstat (limited to 'bsps/arm/stm32h7/hal/stm32h7xx_hal_cryp_ex.c')
| -rw-r--r-- | bsps/arm/stm32h7/hal/stm32h7xx_hal_cryp_ex.c | 446 |
1 files changed, 446 insertions, 0 deletions
diff --git a/bsps/arm/stm32h7/hal/stm32h7xx_hal_cryp_ex.c b/bsps/arm/stm32h7/hal/stm32h7xx_hal_cryp_ex.c new file mode 100644 index 0000000000..cda921b88a --- /dev/null +++ b/bsps/arm/stm32h7/hal/stm32h7xx_hal_cryp_ex.c @@ -0,0 +1,446 @@ +/**
+ ******************************************************************************
+ * @file stm32h7xx_hal_cryp_ex.c
+ * @author MCD Application Team
+ * @brief Extended CRYP HAL module driver
+ * This file provides firmware functions to manage the following
+ * functionalities of CRYP extension peripheral:
+ * + Extended AES processing functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use this driver #####
+ ==============================================================================
+ [..]
+ The CRYP extension HAL driver can be used after AES-GCM or AES-CCM
+ Encryption/Decryption to get the authentication messages.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+ * @{
+ */
+#if defined (CRYP)
+/** @defgroup CRYPEx CRYPEx
+ * @brief CRYP Extension HAL module driver.
+ * @{
+ */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup CRYPEx_Private_Defines
+ * @{
+ */
+
+#define CRYP_PHASE_INIT 0x00000000U
+#define CRYP_PHASE_HEADER CRYP_CR_GCM_CCMPH_0
+#define CRYP_PHASE_PAYLOAD CRYP_CR_GCM_CCMPH_1
+#define CRYP_PHASE_FINAL CRYP_CR_GCM_CCMPH
+
+#define CRYP_OPERATINGMODE_ENCRYPT 0x00000000U
+#define CRYP_OPERATINGMODE_DECRYPT CRYP_CR_ALGODIR
+
+#define CRYPEx_PHASE_PROCESS 0x02U /*!< CRYP peripheral is in processing phase */
+#define CRYPEx_PHASE_FINAL 0x03U /*!< CRYP peripheral is in final phase this is relevant only with CCM and GCM modes */
+
+/* CTR0 information to use in CCM algorithm */
+#define CRYP_CCM_CTR0_0 0x07FFFFFFU
+#define CRYP_CCM_CTR0_3 0xFFFFFF00U
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+
+
+
+/* Exported functions---------------------------------------------------------*/
+/** @addtogroup CRYPEx_Exported_Functions
+ * @{
+ */
+
+/** @defgroup CRYPEx_Exported_Functions_Group1 Extended AES processing functions
+ * @brief CRYPEx Extended processing functions.
+ *
+@verbatim
+ ==============================================================================
+ ##### Extended AES processing functions #####
+ ==============================================================================
+ [..] This section provides functions allowing to generate the authentication
+ TAG in Polling mode
+ (+)HAL_CRYPEx_AESGCM_GenerateAuthTAG
+ (+)HAL_CRYPEx_AESCCM_GenerateAuthTAG
+ they should be used after Encrypt/Decrypt operation.
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief generate the GCM authentication TAG.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param AuthTag: Pointer to the authentication buffer
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout)
+{
+ uint32_t tickstart;
+ uint64_t headerlength = (uint64_t)(hcryp->Init.HeaderSize) * 32U; /* Header length in bits */
+ uint64_t inputlength = (uint64_t)hcryp->SizesSum * 8U; /* input length in bits */
+ uint32_t tagaddr = (uint32_t)AuthTag;
+
+ if (hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if (hcryp->Phase == CRYPEx_PHASE_PROCESS)
+ {
+ /* Change the CRYP phase */
+ hcryp->Phase = CRYPEx_PHASE_FINAL;
+ }
+ else /* Initialization phase has not been performed*/
+ {
+ /* Disable the Peripheral */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Sequence error code field */
+ hcryp->ErrorCode |= HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE;
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcryp);
+ return HAL_ERROR;
+ }
+
+ /* Disable CRYP to start the final phase */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Select final phase */
+ MODIFY_REG(hcryp->Instance->CR, CRYP_CR_GCM_CCMPH, CRYP_PHASE_FINAL);
+
+ /*ALGODIR bit must be set to ‘0’.*/
+ hcryp->Instance->CR &= ~CRYP_CR_ALGODIR;
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write the number of bits in header (64 bits) followed by the number of bits
+ in the payload */
+#if !defined (CRYP_VER_2_2)
+ /* STM32H7 rev.B and above : data has to be inserted normally (no swapping)*/
+ if (hcryp->Version >= REV_ID_B)
+#endif /*End of not defined CRYP_VER_2_2*/
+ {
+ hcryp->Instance->DIN = 0U;
+ hcryp->Instance->DIN = (uint32_t)(headerlength);
+ hcryp->Instance->DIN = 0U;
+ hcryp->Instance->DIN = (uint32_t)(inputlength);
+ }
+#if !defined (CRYP_VER_2_2)
+ else/* data has to be swapped according to the DATATYPE */
+ {
+ if (hcryp->Init.DataType == CRYP_DATATYPE_1B)
+ {
+ hcryp->Instance->DIN = 0U;
+ hcryp->Instance->DIN = __RBIT((uint32_t)(headerlength));
+ hcryp->Instance->DIN = 0U;
+ hcryp->Instance->DIN = __RBIT((uint32_t)(inputlength));
+ }
+ else if (hcryp->Init.DataType == CRYP_DATATYPE_8B)
+ {
+ hcryp->Instance->DIN = 0U;
+ hcryp->Instance->DIN = __REV((uint32_t)(headerlength));
+ hcryp->Instance->DIN = 0U;
+ hcryp->Instance->DIN = __REV((uint32_t)(inputlength));
+ }
+ else if (hcryp->Init.DataType == CRYP_DATATYPE_16B)
+ {
+ hcryp->Instance->DIN = 0U;
+ hcryp->Instance->DIN = __ROR((uint32_t)headerlength, 16U);
+ hcryp->Instance->DIN = 0U;
+ hcryp->Instance->DIN = __ROR((uint32_t)inputlength, 16U);
+ }
+ else if (hcryp->Init.DataType == CRYP_DATATYPE_32B)
+ {
+ hcryp->Instance->DIN = 0U;
+ hcryp->Instance->DIN = (uint32_t)(headerlength);
+ hcryp->Instance->DIN = 0U;
+ hcryp->Instance->DIN = (uint32_t)(inputlength);
+ }
+ else
+ {
+ /* Nothing to do */
+ }
+ }
+#endif /*End of not defined CRYP_VER_2_2*/
+ /* Wait for OFNE flag to be raised */
+ tickstart = HAL_GetTick();
+ while (HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
+ {
+ /* Disable the CRYP Peripheral Clock */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Change state */
+ hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT;
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcryp);
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ /* Read the authentication TAG in the output FIFO */
+ *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT;
+ tagaddr += 4U;
+ *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT;
+ tagaddr += 4U;
+ *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT;
+ tagaddr += 4U;
+ *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT;
+
+ /* Disable the peripheral */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcryp);
+ }
+ else
+ {
+ /* Busy error code field */
+ hcryp->ErrorCode |= HAL_CRYP_ERROR_BUSY;
+ return HAL_ERROR;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief AES CCM Authentication TAG generation.
+ * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+ * the configuration information for CRYP module
+ * @param AuthTag: Pointer to the authentication buffer
+ * @param Timeout: Timeout duration
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout)
+{
+ uint32_t tagaddr = (uint32_t)AuthTag;
+ uint32_t ctr0 [4] = {0};
+ uint32_t ctr0addr = (uint32_t)ctr0;
+ uint32_t tickstart;
+
+ if (hcryp->State == HAL_CRYP_STATE_READY)
+ {
+ /* Process locked */
+ __HAL_LOCK(hcryp);
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_BUSY;
+
+ /* Check if initialization phase has already been performed */
+ if (hcryp->Phase == CRYPEx_PHASE_PROCESS)
+ {
+ /* Change the CRYP phase */
+ hcryp->Phase = CRYPEx_PHASE_FINAL;
+ }
+ else /* Initialization phase has not been performed*/
+ {
+ /* Disable the peripheral */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Sequence error code field */
+ hcryp->ErrorCode |= HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE;
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcryp);
+ return HAL_ERROR;
+ }
+
+ /* Disable CRYP to start the final phase */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Select final phase & ALGODIR bit must be set to ‘0’. */
+ MODIFY_REG(hcryp->Instance->CR, CRYP_CR_GCM_CCMPH | CRYP_CR_ALGODIR, CRYP_PHASE_FINAL | CRYP_OPERATINGMODE_ENCRYPT);
+
+ /* Enable the CRYP peripheral */
+ __HAL_CRYP_ENABLE(hcryp);
+
+ /* Write the counter block in the IN FIFO, CTR0 information from B0
+ data has to be swapped according to the DATATYPE*/
+ ctr0[0] = (hcryp->Init.B0[0]) & CRYP_CCM_CTR0_0;
+ ctr0[1] = hcryp->Init.B0[1];
+ ctr0[2] = hcryp->Init.B0[2];
+ ctr0[3] = hcryp->Init.B0[3] & CRYP_CCM_CTR0_3;
+
+#if !defined (CRYP_VER_2_2)
+ /*STM32H7 rev.B and above : data has to be inserted normally (no swapping)*/
+ if (hcryp->Version >= REV_ID_B)
+#endif /*End of not defined CRYP_VER_2_2*/
+ {
+ hcryp->Instance->DIN = *(uint32_t *)(ctr0addr);
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = *(uint32_t *)(ctr0addr);
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = *(uint32_t *)(ctr0addr);
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = *(uint32_t *)(ctr0addr);
+ }
+#if !defined (CRYP_VER_2_2)
+ else /* data has to be swapped according to the DATATYPE */
+ {
+ if (hcryp->Init.DataType == CRYP_DATATYPE_8B)
+ {
+ hcryp->Instance->DIN = __REV(*(uint32_t *)(ctr0addr));
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = __REV(*(uint32_t *)(ctr0addr));
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = __REV(*(uint32_t *)(ctr0addr));
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = __REV(*(uint32_t *)(ctr0addr));
+ }
+ else if (hcryp->Init.DataType == CRYP_DATATYPE_16B)
+ {
+ hcryp->Instance->DIN = __ROR(*(uint32_t *)(ctr0addr), 16U);
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = __ROR(*(uint32_t *)(ctr0addr), 16U);
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = __ROR(*(uint32_t *)(ctr0addr), 16U);
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = __ROR(*(uint32_t *)(ctr0addr), 16U);
+ }
+ else if (hcryp->Init.DataType == CRYP_DATATYPE_1B)
+ {
+ hcryp->Instance->DIN = __RBIT(*(uint32_t *)(ctr0addr));
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = __RBIT(*(uint32_t *)(ctr0addr));
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = __RBIT(*(uint32_t *)(ctr0addr));
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = __RBIT(*(uint32_t *)(ctr0addr));
+ }
+ else
+ {
+ hcryp->Instance->DIN = *(uint32_t *)(ctr0addr);
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = *(uint32_t *)(ctr0addr);
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = *(uint32_t *)(ctr0addr);
+ ctr0addr += 4U;
+ hcryp->Instance->DIN = *(uint32_t *)(ctr0addr);
+ }
+ }
+#endif /*End of not defined CRYP_VER_2_2*/
+ /* Wait for OFNE flag to be raised */
+ tickstart = HAL_GetTick();
+ while (HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
+ {
+ /* Disable the CRYP peripheral Clock */
+ __HAL_CRYP_DISABLE(hcryp);
+
+ /* Change state */
+ hcryp->ErrorCode |= HAL_CRYP_ERROR_TIMEOUT;
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcryp);
+ return HAL_ERROR;
+ }
+ }
+ }
+
+ /* Read the Auth TAG in the IN FIFO */
+ *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT;
+ tagaddr += 4U;
+ *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT;
+ tagaddr += 4U;
+ *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT;
+ tagaddr += 4U;
+ *(uint32_t *)(tagaddr) = hcryp->Instance->DOUT;
+
+ /* Change the CRYP peripheral state */
+ hcryp->State = HAL_CRYP_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hcryp);
+
+ /* Disable CRYP */
+ __HAL_CRYP_DISABLE(hcryp);
+ }
+ else
+ {
+ /* Busy error code field */
+ hcryp->ErrorCode = HAL_CRYP_ERROR_BUSY;
+ return HAL_ERROR;
+ }
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+/**
+ * @}
+ */
+#endif /* CRYP */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|