summaryrefslogtreecommitdiffstats
path: root/make/custom/mvme2307.cfg
blob: 1afb42527aa8e12db1c4158d0a09533a86b23a8a (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
#
#  Config file for the PowerPC 604 based mvme2307
#
#  $Id$
#

include $(RTEMS_ROOT)/make/custom/default.cfg

RTEMS_CPU=powerpc
RTEMS_CPU_MODEL=mpc604
RTEMS_PPC_EXCEPTION_PROCESSING_MODEL=new

# This is the actual bsp directory used during the build process.
RTEMS_BSP_FAMILY=motorola_powerpc

#  This section makes the target dependent options file.

#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
#     do not pause between screens of output in the rtems tests
#
#  CONSOLE_USE_POLLED     (mvme2307_bsp)
#  CONSOLE_USE_INTERRUPTS (mvme2307_bsp)
#     The mvme2307 console driver has the structure to operate in either
#     polled or interrupt mode.  However both modes only trap to the
#     monitor currently.
#
#  PPC_VECTOR_FILE_BASE (PowerPC)
#     This defines the base address of the exception table.
#     NOTE: Vectors are actually at 0xFFF00000 but file starts at offset 0x0100
#
#  PPC_USE_SPRG (RTEMS PowerPC port)
#     If defined, then the PowerPC specific code in RTEMS will use some
#     of the special purpose registers to slightly optimize interrupt
#     response time.  The use of these registers can conflict with 
#     other tools like debuggers.
#

define make-target-options
	@echo "#define RTEMS_TEST_NO_PAUSE 1"                  >>$@
	@echo "#define PPCN_60X_USE_DINK 0"                   >>$@
	@echo "#define PPCN_60X_USE_NONE 1"                   >>$@
	@echo "#define PPC_USE_DATA_CACHE 1"                   >>$@
	@echo "#define PPC_VECTOR_FILE_BASE 0x0100"            >>$@
	@echo "#define PPC_USE_SPRG  1"
endef

#  This contains the compiler options necessary to select the CPU model
#  and (hopefully) optimize for it. 
#
CPU_CFLAGS = -mcpu=604 -mmultiple -mstring -mstrict-align

# optimize flag: typically -0, could use -O4 or -fast
# -O4 is ok for RTEMS
# NOTE: some level of -O may be actually required by inline assembler
#CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions
CFLAGS_OPTIMIZE_V = -O4

# debug flags: typically none, but at least -O1 is required due to this
# BSP using inlined code
CFLAGS_DEBUG_V = -O1

# profile flags: typically none, but at least -O1 is required due to this
# BSP using inlined code
CFLAGS_PROFILE_V = -O1   

# The following is a linkcmds file which will work without using the
# -specs system in gcc 2.8.
#       $(LD) $(XLDFLAGS) -T $(LINKCMDS) \
#         -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)
#       $(LD) $(XLDFLAGS) -Ttext 0x20000 \
#         -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)

#       $(CC) -mmvme -mrtems -nostartfiles -mcpu=603 \
#           -o $(basename $@).exe -L $(PROJECT_RELEASE)/lib \
#            $(START_FILE) $(LINK_OBJS) \
#            $(LD_LIBS) \
#           -Wl,-\( -Wl,-lc -Wl,-lrtemsall -Wl,-lgcc -Wl,-\)
define make-exe
	$(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $@ $(LINK_OBJS) $(LINK_LIBS)
	$(NM) -g -n $@ > $(basename $@).num
	$(SIZE) $@
#    The following commands make a bootable image but will not work outside
#    the build tree.
#	test -d ${PROJECT_RELEASE}/bin || mkdir ${PROJECT_RELEASE}/bin
#	$(CP) $@ $(PROJECT_ROOT)/powerpc-rtems/c/mvme2307/lib/libbsp/powerpc/$(RTEMS_BSP_FAMILY)/bootloader/$(ARCH); \
#	( cd $(PROJECT_ROOT)/powerpc-rtems/c/mvme2307/lib/libbsp/powerpc/$(RTEMS_BSP_FAMILY)/bootloader; \
#	$(MAKE) bootloader BINARY_LOADED=$@; )
#	f=`basename $@ .exe`; \
#        cp $(PROJECT_ROOT)/powerpc-rtems/c/mvme2307/lib/libbsp/powerpc/$(RTEMS_BSP_FAMILY)/bootloader/bootloader \
#	    ${PROJECT_RELEASE}/bin/$${f}$(LIB_VARIANT).exe \
#	&& chmod 755 \
#	  ${PROJECT_RELEASE}/bin/$${f}$(LIB_VARIANT).exe
endef


# Miscellaneous additions go here

# No start file
START_BASE=