path: root/c/src/lib/libcpu/m68k/m68040/fpsp/fpsp.defs

|
|	fpsp.h 3.3 3.3
|

|		Copyright (C) Motorola, Inc. 1990
|			All Rights Reserved
|
|	THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA 
|	The copyright notice above does not evidence any  
|	actual or intended publication of such source code.

|	fpsp.h --- stack frame offsets during FPSP exception handling
|
|	These equates are used to access the exception frame, the fsave
|	frame and any local variables needed by the FPSP package.
|	
|	All FPSP handlers begin by executing:
|
|		link	a6,#-LOCAL_SIZE
|		fsave	-(a7)
|		movem.l	d0-d1/a0-a1,USER_DA(a6)
|		fmovem.x fp0-fp3,USER_FP0(a6)
|		fmove.l	fpsr/fpcr/fpiar,USER_FPSR(a6)
|
|	After initialization, the stack looks like this:
|
|	A7 --->	+-------------------------------+
|		|				|
|		|	FPU fsave area		|
|		|				|
|		+-------------------------------+
|		|				|
|		|	FPSP Local Variables	|
|		|	     including		|
|		|	  saved registers	|
|		|				|
|		+-------------------------------+
|	A6 --->	|	Saved A6		|
|		+-------------------------------+
|		|				|
|		|	Exception Frame		|
|		|				|
|		|				|
|
|	Positive offsets from A6 refer to the exception frame.  Negative
|	offsets refer to the Local Variable area and the fsave area.
|	The fsave frame is also accessible 'from the top' via A7.
|
|	On exit, the handlers execute:
|
|		movem.l	USER_DA(a6),d0-d1/a0-a1
|		fmovem.x USER_FP0(a6),fp0-fp3
|		fmove.l	USER_FPSR(a6),fpsr/fpcr/fpiar
|		frestore (a7)+
|		unlk	a6
|
|	and then either 'bra fpsp_done' if the exception was completely
|	handled	by the package, or 'bra real_xxxx' which is an external
|	label to a routine that will process a real exception of the
|	type that was generated.  Some handlers may omit the 'frestore'
|	if the FPU state after the exception is idle.
|
|	Sometimes the exception handler will transform the fsave area
|	because it needs to report an exception back to the user.  This
|	can happen if the package is entered for an unimplemented float
|	instruction that generates (say) an underflow.  Alternatively,
|	a second fsave frame can be pushed onto the stack and the
|	handler	exit code will reload the new frame and discard the old.
|
|	The registers d0, d1, a0, a1 and fp0-fp3 are always saved and
|	restored from the 'local variable' area and can be used as
|	temporaries.  If a routine needs to change any
|	of these registers, it should modify the saved copy and let
|	the handler exit code restore the value.
|
|----------------------------------------------------------------------
|
|	Local Variables on the stack
|
	.set		LOCAL_SIZE,192	| bytes needed for local variables
	.set		LV,-LOCAL_SIZE	| convenient base value
|
	.set		USER_DA,LV+0	| save space for D0-D1,A0-A1
	.set		USER_D0,LV+0	| saved user D0
	.set		USER_D1,LV+4	| saved user D1
	.set		USER_A0,LV+8	| saved user A0
	.set		USER_A1,LV+12	| saved user A1
	.set		USER_FP0,LV+16	| saved user FP0
	.set		USER_FP1,LV+28	| saved user FP1
	.set		USER_FP2,LV+40	| saved user FP2
	.set		USER_FP3,LV+52	| saved user FP3
	.set		USER_FPCR,LV+64	| saved user FPCR
	.set		FPCR_ENABLE,USER_FPCR+2	| FPCR exception enable 
	.set		FPCR_MODE,USER_FPCR+3	| FPCR rounding mode control
	.set		USER_FPSR,LV+68	| saved user FPSR
	.set		FPSR_CC,USER_FPSR+0	| FPSR condition code
	.set		FPSR_QBYTE,USER_FPSR+1	| FPSR quotient
	.set		FPSR_EXCEPT,USER_FPSR+2	| FPSR exception
	.set		FPSR_AEXCEPT,USER_FPSR+3	| FPSR accrued exception
	.set		USER_FPIAR,LV+72	| saved user FPIAR
	.set		FP_SCR1,LV+76	| room for a temporary float value
	.set		FP_SCR2,LV+92	| room for a temporary float value
	.set		L_SCR1,LV+108	| room for a temporary long value
	.set		L_SCR2,LV+112	| room for a temporary long value
	.set		STORE_FLG,LV+116
	.set		BINDEC_FLG,LV+117	| used in bindec
	.set		DNRM_FLG,LV+118	| used in res_func
	.set		RES_FLG,LV+119	| used in res_func
	.set		DY_MO_FLG,LV+120	| dyadic/monadic flag
	.set		UFLG_TMP,LV+121	| temporary for uflag errata
	.set		CU_ONLY,LV+122	| cu-only flag
	.set		VER_TMP,LV+123	| temp holding for version number
	.set		L_SCR3,LV+124	| room for a temporary long value
	.set		FP_SCR3,LV+128	| room for a temporary float value
	.set		FP_SCR4,LV+144	| room for a temporary float value
	.set		FP_SCR5,LV+160	| room for a temporary float value
	.set		FP_SCR6,LV+176
|
|NEXT		equ	LV+192		;need to increase LOCAL_SIZE
|
|--------------------------------------------------------------------------
|
|	fsave offsets and bit definitions
|
|	Offsets are defined from the end of an fsave because the last 10
|	words of a busy frame are the same as the unimplemented frame.
|
	.set		CU_SAVEPC,LV-92	| micro-pc for CU (1 byte)
	.set		FPR_DIRTY_BITS,LV-91	| fpr dirty bits
|
	.set		WBTEMP,LV-76	| write back temp (12 bytes)
	.set		WBTEMP_EX,WBTEMP	| wbtemp sign and exponent (2 bytes)
	.set		WBTEMP_HI,WBTEMP+4	| wbtemp mantissa [63:32] (4 bytes)
	.set		WBTEMP_LO,WBTEMP+8	| wbtemp mantissa [31:00] (4 bytes)
|
	.set		WBTEMP_SGN,WBTEMP+2	| used to store sign
|
	.set		FPSR_SHADOW,LV-64	| fpsr shadow reg
|
	.set		FPIARCU,LV-60	| Instr. addr. reg. for CU (4 bytes)
|
	.set		CMDREG2B,LV-52	| cmd reg for machine 2
	.set		CMDREG3B,LV-48	| cmd reg for E3 exceptions (2 bytes)
|
	.set		NMNEXC,LV-44	| NMNEXC (unsup,snan bits only)
	.set		nmn_unsup_bit,1
	.set		nmn_snan_bit,0
|
	.set		NMCEXC,LV-43	| NMNEXC & NMCEXC
	.set		nmn_operr_bit,7
	.set		nmn_ovfl_bit,6
	.set		nmn_unfl_bit,5
	.set		nmc_unsup_bit,4
	.set		nmc_snan_bit,3
	.set		nmc_operr_bit,2
	.set		nmc_ovfl_bit,1
	.set		nmc_unfl_bit,0
|
	.set		STAG,LV-40	| source tag (1 byte)
	.set		WBTEMP_GRS,LV-40	| alias wbtemp guard, round, sticky
	.set		guard_bit,1	| guard bit is bit number 1
	.set		round_bit,0	| round bit is bit number 0
	.set		stag_mask,0xE0	| upper 3 bits are source tag type
	.set		denorm_bit,7	| bit determins if denorm or unnorm
	.set		etemp15_bit,4	| etemp exponent bit #15
	.set		wbtemp66_bit,2	| wbtemp mantissa bit #66
	.set		wbtemp1_bit,1	| wbtemp mantissa bit #1
	.set		wbtemp0_bit,0	| wbtemp mantissa bit #0
|
	.set		STICKY,LV-39	| holds sticky bit
	.set		sticky_bit,7
|
	.set		CMDREG1B,LV-36	| cmd reg for E1 exceptions (2 bytes)
	.set		kfact_bit,12	| distinguishes static/dynamic k-factor
|					;on packed move outs.  NOTE: this
|					;equate only works when CMDREG1B is in
|					;a register.
|
	.set		CMDWORD,LV-35	| command word in cmd1b
	.set		direction_bit,5	| bit 0 in opclass
	.set		size_bit2,12	| bit 2 in size field
|
	.set		DTAG,LV-32	| dest tag (1 byte)
	.set		dtag_mask,0xE0	| upper 3 bits are dest type tag
	.set		fptemp15_bit,4	| fptemp exponent bit #15
|
	.set		WB_BYTE,LV-31	| holds WBTE15 bit (1 byte)
	.set		wbtemp15_bit,4	| wbtemp exponent bit #15
|
	.set		E_BYTE,LV-28	| holds E1 and E3 bits (1 byte)
	.set		E1,2		| which bit is E1 flag
	.set		E3,1		| which bit is E3 flag
	.set		SFLAG,0		| which bit is S flag
|
	.set		T_BYTE,LV-27	| holds T and U bits (1 byte)
	.set		XFLAG,7		| which bit is X flag
	.set		UFLAG,5		| which bit is U flag
	.set		TFLAG,4		| which bit is T flag
|
	.set		FPTEMP,LV-24	| fptemp (12 bytes)
	.set		FPTEMP_EX,FPTEMP	| fptemp sign and exponent (2 bytes)
	.set		FPTEMP_HI,FPTEMP+4	| fptemp mantissa [63:32] (4 bytes)
	.set		FPTEMP_LO,FPTEMP+8	| fptemp mantissa [31:00] (4 bytes)
|
	.set		FPTEMP_SGN,FPTEMP+2	| used to store sign
|
	.set		ETEMP,LV-12	| etemp (12 bytes)
	.set		ETEMP_EX,ETEMP	| etemp sign and exponent (2 bytes)
	.set		ETEMP_HI,ETEMP+4	| etemp mantissa [63:32] (4 bytes)
	.set		ETEMP_LO,ETEMP+8	| etemp mantissa [31:00] (4 bytes)
|
	.set		ETEMP_SGN,ETEMP+2	| used to store sign
|
	.set		EXC_SR,4	| exception frame status register
	.set		EXC_PC,6	| exception frame program counter
	.set		EXC_VEC,10	| exception frame vector (format+vector#)
	.set		EXC_EA,12	| exception frame effective address
|
|--------------------------------------------------------------------------
|
|	FPSR/FPCR bits
|
	.set		neg_bit,3	| negative result
	.set		z_bit,2		| zero result
	.set		inf_bit,1	| infinity result
	.set		nan_bit,0	| not-a-number result
|
	.set		q_sn_bit,7	| sign bit of quotient byte
|
	.set		bsun_bit,7	| branch on unordered
	.set		snan_bit,6	| signalling nan
	.set		operr_bit,5	| operand error
	.set		ovfl_bit,4	| overflow
	.set		unfl_bit,3	| underflow
	.set		dz_bit,2	| divide by zero
	.set		inex2_bit,1	| inexact result 2
	.set		inex1_bit,0	| inexact result 1
|
	.set		aiop_bit,7	| accrued illegal operation
	.set		aovfl_bit,6	| accrued overflow
	.set		aunfl_bit,5	| accrued underflow
	.set		adz_bit,4	| accrued divide by zero
	.set		ainex_bit,3	| accrued inexact
|
|	FPSR individual bit masks
|
	.set		neg_mask,0x08000000
	.set		z_mask,0x04000000
	.set		inf_mask,0x02000000
	.set		nan_mask,0x01000000
|
	.set		bsun_mask,0x00008000
	.set		snan_mask,0x00004000
	.set		operr_mask,0x00002000
	.set		ovfl_mask,0x00001000
	.set		unfl_mask,0x00000800
	.set		dz_mask,0x00000400
	.set		inex2_mask,0x00000200
	.set		inex1_mask,0x00000100
|
	.set		aiop_mask,0x00000080	| accrued illegal operation
	.set		aovfl_mask,0x00000040	| accrued overflow
	.set		aunfl_mask,0x00000020	| accrued underflow
	.set		adz_mask,0x00000010	| accrued divide by zero
	.set		ainex_mask,0x00000008	| accrued inexact
|
|	FPSR combinations used in the FPSP
|
	.set		dzinf_mask,inf_mask+dz_mask+adz_mask
	.set		opnan_mask,nan_mask+operr_mask+aiop_mask
	.set		nzi_mask,0x01ffffff	| clears N, Z, and I
	.set		unfinx_mask,unfl_mask+inex2_mask+aunfl_mask+ainex_mask
	.set		unf2inx_mask,unfl_mask+inex2_mask+ainex_mask
	.set		ovfinx_mask,ovfl_mask+inex2_mask+aovfl_mask+ainex_mask
	.set		inx1a_mask,inex1_mask+ainex_mask
	.set		inx2a_mask,inex2_mask+ainex_mask
	.set		snaniop_mask,nan_mask+snan_mask+aiop_mask
	.set		naniop_mask,nan_mask+aiop_mask
	.set		neginf_mask,neg_mask+inf_mask
	.set		infaiop_mask,inf_mask+aiop_mask
	.set		negz_mask,neg_mask+z_mask
	.set		opaop_mask,operr_mask+aiop_mask
	.set		unfl_inx_mask,unfl_mask+aunfl_mask+ainex_mask
	.set		ovfl_inx_mask,ovfl_mask+aovfl_mask+ainex_mask
|
|--------------------------------------------------------------------------
|
|	FPCR rounding modes
|
	.set		x_mode,0x00	| round to extended
	.set		s_mode,0x40	| round to single
	.set		d_mode,0x80	| round to double
|
	.set		rn_mode,0x00	| round nearest
	.set		rz_mode,0x10	| round to zero
	.set		rm_mode,0x20	| round to minus infinity
	.set		rp_mode,0x30	| round to plus infinity
|
|--------------------------------------------------------------------------
|
|	Miscellaneous equates
|
	.set		signan_bit,6	| signalling nan bit in mantissa
	.set		sign_bit,7
|
	.set		rnd_stky_bit,29	| round/sticky bit of mantissa
|				this can only be used if in a data register
	.set		sx_mask,0x01800000	| set s and x bits in word $48
|
	.set		LOCAL_EX,0
	.set		LOCAL_SGN,2
	.set		LOCAL_HI,4
	.set		LOCAL_LO,8
	.set		LOCAL_GRS,12	| valid ONLY for FP_SCR1, FP_SCR2
|
|
	.set		norm_tag,0x00	| tag bits in {7:5} position
	.set		zero_tag,0x20
	.set		inf_tag,0x40
	.set		nan_tag,0x60
	.set		dnrm_tag,0x80
|
|	fsave sizes and formats
|
	.set		VER_4,0x40	| fpsp compatible version numbers
|					are in the $40s {$40-$4f}
	.set		VER_40,0x40	| original version number
	.set		VER_41,0x41	| revision version number
|
	.set		BUSY_SIZE,100	| size of busy frame
	.set		BUSY_FRAME,LV-BUSY_SIZE	| start of busy frame
|
	.set		UNIMP_40_SIZE,44	| size of orig unimp frame
	.set		UNIMP_41_SIZE,52	| size of rev unimp frame
|
	.set		IDLE_SIZE,4	| size of idle frame
	.set		IDLE_FRAME,LV-IDLE_SIZE	| start of idle frame
|
|	exception vectors
|
	.set		TRACE_VEC,0x2024	| trace trap
	.set		FLINE_VEC,0x002C	| 'real' F-line
	.set		UNIMP_VEC,0x202C	| unimplemented
	.set		INEX_VEC,0x00C4
|
	.set		dbl_thresh,0x3C01
	.set		sgl_thresh,0x3F81
|