1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
|
## Process this file with autoconf to produce a configure script.
##
## $Id$
AC_PREREQ(2.59)
AC_INIT([rtems-c-src-lib-libbsp-powerpc-mbx5xx],[_RTEMS_VERSION],[rtems-bugs@rtems.com])
AC_CONFIG_SRCDIR([bsp_specs])
RTEMS_TOP(../../../../../..)
RTEMS_CANONICAL_TARGET_CPU
AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.9])
RTEMS_BSP_CONFIGURE
RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
RTEMS_CANONICALIZE_TOOLS
RTEMS_PROG_CCAS
RTEMS_CHECK_NETWORKING
AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
RTEMS_BSPOPTS_SET([WATCHDOG_TIMEOUT],[*],[0xFFFF])
RTEMS_BSPOPTS_HELP([WATCHDOG_TIMEOUT],
[Define to the desired timeout (in steps of 1/20 msec) to enable the
watchdog. Default is to disable the watchdog entirely.])
RTEMS_BSPOPTS_SET([UARTS_USE_TERMIOS],[*],[0])
RTEMS_BSPOPTS_HELP([UARTS_USE_TERMIOS],
[Define to 1 if you want termios support for every port.
Termios support is independent of the choice of UART I/O mode.])
RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[*],[SCI2_MINOR])
RTEMS_BSPOPTS_HELP([CONSOLE_MINOR],
[Must be defined to be one of SCI1_MINOR or SCI2_MINOR. Determines which
device will be registered as /dev/console.])
RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[*],[0])
RTEMS_BSPOPTS_HELP([UARTS_IO_MODE],
[Define to 1 if you want interrupt-driven I/O for the SCI ports.])
RTEMS_BSPOPTS_SET([PRINTK_MINOR],[*],[SCI2_MINOR])
RTEMS_BSPOPTS_HELP([PRINTK_MINOR],
[Must be defined to be one of SCI1_MINOR or SCI2_MINOR. Determines which
device is used for output by printk(). The printk port always uses polled
I/O. Don't open the printk port from RTEMS unless also using polled I/O
for the SCI ports.])
# Explicitly list a Makefile here
AC_CONFIG_FILES([Makefile])
RTEMS_PPC_EXCEPTIONS
AC_OUTPUT
|
