summaryrefslogtreecommitdiffstats
path: root/c/src/lib/libbsp/powerpc/mpc8260ads/startup/bspstart.c
blob: 9f35b9eaca5b56f9d1e6b4ba242c03355c94a5bc (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
/*  bsp_start()
 *
 *  This routine starts the application.  It includes application,
 *  board, and monitor specific initialization and configuration.
 *  The generic CPU dependent initialization has been performed
 *  before this routine is invoked.
 *
 *  The MPC860 specific stuff was written by Jay Monkman (jmonkman@frasca.com)
 *
 *  Modified for the MPC8260ADS board by Andy Dachs <a.dachs@sstl.co.uk>
 *  Surrey Satellite Technology Limited, 2001
 *  A 40MHz system clock is assumed.
 *  The PON. RST.CONF. Dip switches (DS1) are
 *  1 - Off
 *  2 - On
 *  3 - Off
 *  4 - On
 *  5 - Off
 *  6 - Off
 *  7 - Off
 *  8 - Off
 *  Dip switches on DS2 and DS3 are all set to ON
 *  The LEDs on the board are used to signal panic and fatal_error
 *  conditions.
 *  The mmu is unused at this time.
 *
 *
 *  COPYRIGHT (c) 1989-1999.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.rtems.com/license/LICENSE.
 *
 *  $Id$
 */

#include <bsp.h>

/*
#include <mmu.h>
*/

#include <mpc8260.h>
#include <rtems/libio.h>
#include <rtems/libcsupport.h>
#include <rtems/score/thread.h>
#include <rtems/bspIo.h>
#include <libcpu/cpuIdent.h>
#include <libcpu/spr.h>

#include <string.h>

#ifdef STACK_CHECKER_ON
#include <stackchk.h>
#endif


SPR_RW(SPRG0)
SPR_RW(SPRG1)

/*
 *  The original table from the application (in ROM) and our copy of it with
 *  some changes. Configuration is defined in <confdefs.h>. Make sure that
 *  our configuration tables are uninitialized so that they get allocated in
 *  the .bss section (RAM).
 */
extern rtems_configuration_table Configuration;
extern unsigned long intrStackPtr;
rtems_configuration_table  BSP_Configuration;

rtems_cpu_table Cpu_table;

char *rtems_progname;


/*
 *  Use the shared implementations of the following routines.
 *  Look in rtems/c/src/lib/libbsp/shared/bsppost.c and
 *  rtems/c/src/lib/libbsp/shared/bsplibc.c.
 */
void bsp_postdriver_hook(void);
void bsp_libc_init( void *, uint32_t, int );

void  _BSP_GPLED1_on(void);
void  _BSP_GPLED0_on(void);
void  cpu_init(void);
void  initialize_exceptions(void);

void BSP_panic(char *s)
{
  _BSP_GPLED1_on();
  printk("%s PANIC %s\n",_RTEMS_version, s);
  __asm__ __volatile ("sc");
}

void _BSP_Fatal_error(unsigned int v)
{
  _BSP_GPLED0_on();
  _BSP_GPLED1_on();
  printk("%s PANIC ERROR %x\n",_RTEMS_version, v);
  __asm__ __volatile ("sc");
}

void _BSP_GPLED0_on()
{
  BCSR *csr;
  csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
  csr->bcsr0 &=  ~GP0_LED;		/* Turn on GP0 LED */
}

void _BSP_GPLED0_off()
{
  BCSR *csr;
  csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
  csr->bcsr0 |=  GP0_LED;		/* Turn off GP0 LED */
}

void _BSP_GPLED1_on()
{
  BCSR *csr;
  csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
  csr->bcsr0 &=  ~GP1_LED;		/* Turn on GP1 LED */
}

void _BSP_GPLED1_off()
{
  BCSR *csr;
  csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
  csr->bcsr0 |=  GP1_LED;		/* Turn off GP1 LED */
}

void _BSP_Uart1_enable()
{
  BCSR *csr;
  csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
  csr->bcsr1 &= ~UART1_E;		/* Enable Uart1 */
}

void _BSP_Uart1_disable()
{
  BCSR *csr;
  csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
  csr->bcsr1 |=  UART1_E;		/* Disable Uart1 */
}

void _BSP_Uart2_enable()
{
  BCSR *csr;
  csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
  csr->bcsr1 &= ~UART2_E;		/* Enable Uart2 */
}

void _BSP_Uart2_disable()
{
  BCSR *csr;
  csr = (BCSR *)(m8260.memc[1].br & 0xFFFF8000);
  csr->bcsr1 |=  UART2_E;		/* Disable Uart2 */

}






extern void m8260_console_reserve_resources(rtems_configuration_table *);


/*
 *  Function:   bsp_pretasking_hook
 *  Created:    95/03/10
 *
 *  Description:
 *      BSP pretasking hook.  Called just before drivers are initialized.
 *      Used to setup libc and install any BSP extensions.
 *
 *  NOTES:
 *      Must not use libc (to do io) from here, since drivers are
 *      not yet initialized.
 *
 */
 
void
bsp_pretasking_hook(void)
{
  /* 
   *  These are assigned addresses in the linkcmds file for the BSP. This
   *  approach is better than having these defined as manifest constants and
   *  compiled into the kernel, but it is still not ideal when dealing with
   *  multiprocessor configuration in which each board as a different memory
   *  map. A better place for defining these symbols might be the makefiles.
   *  Consideration should also be given to developing an approach in which
   *  the kernel and the application can be linked and burned into ROM
   *  independently of each other.
   */
    extern unsigned char _HeapStart;
    extern unsigned char _HeapEnd;

    bsp_libc_init( &_HeapStart, &_HeapEnd - &_HeapStart, 0 );


  
#ifdef STACK_CHECKER_ON
  /*
   *  Initialize the stack bounds checker
   *  We can either turn it on here or from the app.
   */
  
  Stack_check_Initialize();
#endif
  
#ifdef RTEMS_DEBUG
  rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
#endif
}


void bsp_start(void)
{
  extern void *_WorkspaceBase;
  ppc_cpu_id_t myCpu;
  ppc_cpu_revision_t myCpuRevision;
  register unsigned char* intrStack;


  /* Set MPC8260ADS board LEDS and Uart enable lines */
  _BSP_GPLED0_off();
  _BSP_GPLED1_off();
  _BSP_Uart1_enable();
  _BSP_Uart2_enable();


  /*
   * Get CPU identification dynamically. Note that the get_ppc_cpu_type() function
   * store the result in global variables so that it can be used latter...
   */
  myCpu 	= get_ppc_cpu_type();
  myCpuRevision = get_ppc_cpu_revision();



  cpu_init();

/*
  mmu_init();
*/
  /*
   * Initialize some SPRG registers related to irq handling
   */

  intrStack = (((unsigned char*)&intrStackPtr) - CPU_MINIMUM_STACK_FRAME_SIZE);
  _write_SPRG1((unsigned int)intrStack);
  /* signal that we have fixed PR288 - eventually, this should go away */
  _write_SPRG0(PPC_BSP_HAS_FIXED_PR288);

/*
  printk( "About to call initialize_exceptions\n" );
*/
   /*
    * Install our own set of exception vectors
    */

   initialize_exceptions();

/*
  mmu_init();
*/
  
  /*
   * Enable instruction and data caches. Do not force writethrough mode.
   */
#if INSTRUCTION_CACHE_ENABLE
  rtems_cache_enable_instruction();
#endif
#if DATA_CACHE_ENABLE
  rtems_cache_enable_data();
#endif

  /*
   *  Allocate the memory for the RTEMS Work Space.  This can come from
   *  a variety of places: hard coded address, malloc'ed from outside
   *  RTEMS world (e.g. simulator or primitive memory manager), or (as
   *  typically done by stock BSPs) by subtracting the required amount
   *  of work space from the last physical address on the CPU board.
   */

  /*
   *  Need to "allocate" the memory for the RTEMS Workspace and
   *  tell the RTEMS configuration where it is.  This memory is
   *  not malloc'ed.  It is just "pulled from the air".
   */

  BSP_Configuration.work_space_start = (void *)&_WorkspaceBase;


/*
  BSP_Configuration.microseconds_per_tick  = 1000;
*/

  /*
   *  initialize the CPU table for this BSP
   */

  Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
  Cpu_table.postdriver_hook = bsp_postdriver_hook;
  if( Cpu_table.interrupt_stack_size < 4*1024 )
    Cpu_table.interrupt_stack_size   = 4 * 1024;

  Cpu_table.clicks_per_usec 	   = 10;  /* for 40MHz extclk */
  Cpu_table.serial_per_sec  	   = 40000000;
  Cpu_table.serial_external_clock  = 0;
  Cpu_table.serial_xon_xoff 	   = 0;
  Cpu_table.serial_cts_rts 	   = 0;
  Cpu_table.serial_rate 	   = 9600;
  Cpu_table.timer_average_overhead = 3;
  Cpu_table.timer_least_valid 	   = 3;
  Cpu_table.clock_speed 	   = 40000000;




#ifdef REV_0_2
  /* set up some board specific registers */
  m8260.siumcr &= 0xF3FFFFFF;		/* set TBEN ** BUG FIX ** */
  m8260.siumcr |= 0x08000000;
#endif

  /* use BRG1 to generate 32kHz timebase */
/*
  m8260.brgc1 = M8260_BRG_EN + (uint32_t)(((uint16_t)((40016384)/(32768)) - 1) << 1) + 0;
*/


  /*
   * Initalize RTEMS IRQ system
   */
  BSP_rtems_irq_mng_init(0);


  /*
   * Call this in case we use TERMIOS for console I/O
   */

  m8xx_uart_reserve_resources(&BSP_Configuration);

/*
  rtems_termios_initialize();
*/
#ifdef SHOW_MORE_INIT_SETTINGS
  printk("Exit from bspstart\n");
#endif

}

/*
 *
 *  _Thread_Idle_body
 *
 *  Replaces the one in c/src/exec/score/src/threadidlebody.c
 *  The MSR[POW] bit is set to put the CPU into the low power mode
 *  defined in HID0.  HID0 is set during starup in start.S.
 *
 */
Thread _Thread_Idle_body(
  uint32_t   ignored )
{

  for( ; ; )
  {
    asm volatile(
      "mfmsr 3; oris 3,3,4; sync; mtmsr 3; isync; ori 3,3,0; ori 3,3,0"
    );
  }

  return 0; /* to remove warning */
}