1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
|
##
#
# @file
#
# @ingroup mpc55xx_config
#
# @brief Configure script of LibBSP for the MPC55xx evaluation boards.
#
AC_PREREQ(2.60)
AC_INIT([rtems-c-src-lib-libbsp-powerpc-mpc55xxevb],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
AC_CONFIG_SRCDIR([bsp_specs])
RTEMS_TOP(../../../../../..)
RTEMS_CANONICAL_TARGET_CPU
AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
RTEMS_BSP_CONFIGURE
RTEMS_PROG_CC_FOR_TARGET
RTEMS_CANONICALIZE_TOOLS
RTEMS_PROG_CCAS
RTEMS_CHECK_NETWORKING
AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
RTEMS_BSPOPTS_SET([DATA_CACHE_ENABLE],[gwlcfm],[])
RTEMS_BSPOPTS_SET([DATA_CACHE_ENABLE],[mpc5566evb],[1])
RTEMS_BSPOPTS_SET([DATA_CACHE_ENABLE],[*],[1])
RTEMS_BSPOPTS_HELP([DATA_CACHE_ENABLE],
[If defined, the data cache will be enabled after address translation
is turned on.])
RTEMS_BSPOPTS_SET([INSTRUCTION_CACHE_ENABLE],[gwlcfm],[])
RTEMS_BSPOPTS_SET([INSTRUCTION_CACHE_ENABLE],[mpc5566evb],[1])
RTEMS_BSPOPTS_SET([INSTRUCTION_CACHE_ENABLE],[*],[1])
RTEMS_BSPOPTS_HELP([INSTRUCTION_CACHE_ENABLE],
[If defined, the instruction cache will be enabled after address translation
is turned on.])
RTEMS_BSPOPTS_SET([UARTS_USE_TERMIOS],[*],[])
RTEMS_BSPOPTS_HELP([UARTS_USE_TERMIOS],
[Define to 1 if you want termios support for every port.
Termios support is independent of the choice of UART I/O mode.])
RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[gwlcfm],[MPC55XX_ESCI_A_MINOR])
RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[*] ,[MPC55XX_ESCI_A_MINOR])
RTEMS_BSPOPTS_HELP([CONSOLE_MINOR],
[Must be defined to be one of MPC55XX_ESCI_A_MINOR or MPC55XX_ESCI_B_MINOR. Determines which
device will be registered as /dev/console.])
RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[gwlcfm],[1])
RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[*] ,[])
RTEMS_BSPOPTS_HELP([UARTS_IO_MODE],
[Define to 1 if you want interrupt-driven I/O for the SCI ports.])
RTEMS_BSPOPTS_SET([PRINTK_MINOR],[gwlcfm],[MPC55XX_ESCI_A_MINOR])
RTEMS_BSPOPTS_SET([PRINTK_MINOR],[*] ,[MPC55XX_ESCI_B_MINOR])
RTEMS_BSPOPTS_HELP([PRINTK_MINOR],
[Must be defined to be one of MPC55XX_ESCI_A_MINOR or MPC55XX_ESCI_B_MINOR. Determines which
device is used for output by printk(). The printk port always uses polled
I/O. Don't open the printk port from RTEMS unless also using polled I/O
for the SCI ports.])
RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_REF_CLOCK],[gwlcfm],[40000000])
RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_REF_CLOCK],[*] ,[8000000])
RTEMS_BSPOPTS_HELP([MPC55XX_FMPLL_REF_CLOCK],
[Must be defined to be the external reference clock (in Hz)
for clock generation])
RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_CLK_OUT],[gwlcfm],[66000000])
RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_CLK_OUT],[*] ,[128000000])
RTEMS_BSPOPTS_HELP([MPC55XX_FMPLL_CLK_OUT],
[Must be defined to be the PLL output clock (in Hz) for clock generation])
RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_PREDIV],[gwlcfm],[10])
RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_PREDIV],[*] ,[1])
RTEMS_BSPOPTS_HELP([MPC55XX_FMPLL_PREDIV],
[Must be defined to be the PLL predivider factor for clock generation])
RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_MFD],[gwlcfm],[99])
RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_MFD],[*] ,[12])
RTEMS_BSPOPTS_HELP([MPC55XX_FMPLL_MFD],
[Must be defined to be the PLL multiplication factor for clock generation])
RTEMS_BSPOPTS_SET([MPC55XX_EMIOS_PRESCALER],[gwlcfm],[66])
RTEMS_BSPOPTS_SET([MPC55XX_EMIOS_PRESCALER],[*] ,[1])
RTEMS_BSPOPTS_HELP([MPC55XX_EMIOS_PRESCALER],
[Must be defined to set the EMIOS prescaler])
RTEMS_BSPOPTS_SET([MPC55XX_CHIP_TYPE],[mpc5566evb],[5566])
RTEMS_BSPOPTS_SET([MPC55XX_CHIP_TYPE],[gwlcfm] ,[5516])
RTEMS_BSPOPTS_SET([MPC55XX_CHIP_TYPE],[*] ,[5554])
RTEMS_BSPOPTS_HELP([MPC55XX_CHIP_TYPE],
[specifies the chip type in use (e.g. 5554 for MPC5554)])
RTEMS_BSPOPTS_SET([BOARD_GWLCFM],[gwlcfm],[1])
RTEMS_BSPOPTS_HELP([BOARD_GWLCFM],
[If defined, use custom settings of for the GW_LCFM board])
RTEMS_BSPOPTS_SET([RTEMS_BSP_I2C_EEPROM_DEVICE_NAME],[gwlcfm],['"eeprom"'])
RTEMS_BSPOPTS_HELP([RTEMS_BSP_I2C_EEPROM_DEVICE_NAME],[EEPROM name for LibI2C])
RTEMS_BSPOPTS_SET([RTEMS_BSP_I2C_EEPROM_DEVICE_PATH],[gwlcfm],['"/dev/i2c1.eeprom"'])
RTEMS_BSPOPTS_HELP([RTEMS_BSP_I2C_EEPROM_DEVICE_PATH],[EEPROM device file path])
AC_CONFIG_FILES([Makefile
include/bspopts.h])
RTEMS_BSP_CLEANUP_OPTIONS(0, 0)
RTEMS_BSP_LINKCMDS
RTEMS_PPC_EXCEPTIONS
AC_OUTPUT
|
