1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
|
## Process this file with autoconf to produce a configure script.
##
## $Id$
AC_PREREQ(2.60)
AC_INIT([rtems-c-src-lib-libbsp-powerpc-gen5200],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla])
AC_CONFIG_SRCDIR([bsp_specs])
RTEMS_TOP(../../../../../..)
RTEMS_CANONICAL_TARGET_CPU
AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10])
RTEMS_BSP_CONFIGURE
RTEMS_PROG_CC_FOR_TARGET
RTEMS_CANONICALIZE_TOOLS
RTEMS_PROG_CCAS
RTEMS_BSPOPTS_SET([DATA_CACHE_ENABLE],[*],[1])
RTEMS_BSPOPTS_HELP([DATA_CACHE_ENABLE],
[If defined, the data cache will be enabled after address translation
is turned on.])
RTEMS_BSPOPTS_SET([INSTRUCTION_CACHE_ENABLE],[*],[1])
RTEMS_BSPOPTS_HELP([INSTRUCTION_CACHE_ENABLE],
[If defined, the instruction cache will be enabled after address translation
is turned on.])
RTEMS_BSPOPTS_SET([BENCHMARK_IRQ_PROCESSING],[*],[0])
RTEMS_BSPOPTS_HELP([BENCHMARK_IRQ_PROCESSING],
[If set to !0, enable code to benchmark IRQ processing.])
RTEMS_BSPOPTS_SET([ALLOW_IRQ_NESTING],[icecube],[0])
RTEMS_BSPOPTS_SET([ALLOW_IRQ_NESTING],[*],[1])
RTEMS_BSPOPTS_HELP([ALLOW_IRQ_NESTING],
[If set to !0, allow nested IRQ processing.])
RTEMS_BSPOPTS_SET([BSP_PRESS_KEY_FOR_RESET],[icecube],[1])
RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[pm520_cr825],[1])
RTEMS_BSPOPTS_SET([BSP_PRESS_KEY_FOR_RESET],[*],[0])
RTEMS_BSPOPTS_HELP([BSP_PRESS_KEY_FOR_RESET],
[If set to !0, print a message and wait until pressed before resetting
board when application exits.])
RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[icecube],[1])
RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[pm520_*],[1])
RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[brs5l],[1])
RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[*],[0])
RTEMS_BSPOPTS_HELP([BSP_RESET_BOARD_AT_EXIT],
[If set to !0, reset the board when the application exits.])
RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITMASK],[pm520_ze30],[0x037F3F07])
RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITVAL],[pm520_ze30],[0x01552104])
RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITMASK],[brs5l],[0xb30F0F77])
RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITVAL],[brs5l],[0x91050444])
RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITMASK],[dp2],[0x337F3F77])
RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITVAL],[dp2],[0x03550040])
RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITMASK],[*],[0x330F0F77])
RTEMS_BSPOPTS_SET([BSP_GPIOPCR_INITVAL],[*],[0x01050444])
RTEMS_BSPOPTS_HELP([BSP_GPIOPCR_INITMASK],
[defines the bits modified in the MPC5200 GPIOPCR register during init.
Must match the hardware requirements])
RTEMS_BSPOPTS_HELP([BSP_GPIOPCR_INITVAL],
[defines the bit values written in the MPC5200 GPIOPCR register during init.
Must match the hardware requirements])
## on ze30, we have PSC1/4/5/6 ...
RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[pm520_ze30],[0x39])
## on cr825, we have PSC1/2/3
RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[pm520_cr825],[0x07])
## on brs5l, we have PSC1/2/3
RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[brs5l],[0x07])
## on icecube, we only have PSC1
RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[icecube],[0x01])
## dp2: PSC2 (via USB connector), PSC6 (GPS module)
RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[dp2],[0x22])
## default
RTEMS_BSPOPTS_SET([BSP_UART_AVAIL_MASK],[*],[0x01])
RTEMS_BSPOPTS_HELP([BSP_UART_AVAIL_MASK],
[bit mask to specify the UARTS (PSCs), which should be enabled on this board.
Must match the hardware requirements. PSC1 corresponds to the LSB])
RTEMS_BSPOPTS_SET([MPC5200_PSC_INDEX_FOR_GPS_MODULE],[dp2],[5])
RTEMS_BSPOPTS_HELP([MPC5200_PSC_INDEX_FOR_GPS_MODULE],[PSC index for GPS module, if defined results in '/dev/gps'])
RTEMS_BSPOPTS_SET([SINGLE_CHAR_MODE],[dp2],[])
RTEMS_BSPOPTS_SET([SINGLE_CHAR_MODE],[*],[1])
RTEMS_BSPOPTS_HELP([SINGLE_CHAR_MODE],[enable single character mode for the PSC console driver])
RTEMS_BSPOPTS_SET([UARTS_USE_TERMIOS_INT],[dp2],[1])
RTEMS_BSPOPTS_HELP([UARTS_USE_TERMIOS_INT],[enable interrupt support for the PSC console driver])
RTEMS_BSPOPTS_SET([PRINTK_MINOR],[dp2],[1])
RTEMS_BSPOPTS_SET([PRINTK_MINOR],[*],[0])
RTEMS_BSPOPTS_HELP([PRINTK_MINOR],[console minor number used by printk()])
RTEMS_BSPOPTS_SET([PM520_ZE30],[pm520_ze30],[1])
RTEMS_BSPOPTS_HELP([PM520_ZE30],
[enable settings for PM520 ZE30])
RTEMS_BSPOPTS_SET([PM520_CR825],[pm520_cr825],[1])
RTEMS_BSPOPTS_HELP([PM520_CR825],
[enable settings for PM520 CR825])
RTEMS_BSPOPTS_SET([icecube],[icecube],[1])
RTEMS_BSPOPTS_HELP([icecube],
[enable settings for IceCube])
RTEMS_BSPOPTS_SET([BRS5L],[brs5l],[1])
RTEMS_BSPOPTS_HELP([BRS5L],
[enable settings for BRS5L])
RTEMS_BSPOPTS_SET([BSP_TYPE_DP2],[dp2],[1])
RTEMS_BSPOPTS_HELP([BSP_TYPE_DP2],
[enable settings for DP2])
RTEMS_BSPOPTS_SET([HAS_UBOOT],[pm520*],[1])
RTEMS_BSPOPTS_SET([HAS_UBOOT],[icecube],[1])
RTEMS_BSPOPTS_SET([HAS_UBOOT],[dp2],[1])
RTEMS_BSPOPTS_HELP([HAS_UBOOT],[enable U-Boot startup])
RTEMS_CHECK_NETWORKING
AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
# Explicitly list all Makefiles here
AC_CONFIG_FILES([Makefile])
RTEMS_BSP_CLEANUP_OPTIONS(0, 0)
RTEMS_BSP_LINKCMDS
RTEMS_PPC_EXCEPTIONS
AC_OUTPUT
|
