path: root/c/src/lib/libbsp/powerpc/gen5200/ChangeLog

2008-09-23	Joel Sherrill <joel.sherrill@oarcorp.com>

	* configure.ac: Make letting boot_card() handle work area allocation
	mandatory. Rename RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to
	BSP_BOOTCARD_OPTIONS.

2008-09-22	Joel Sherrill <joel.sherrill@oarcorp.com>

	* Makefile.am, configure.ac, console/console.c, include/bsp.h,
	startup/bspstart.c: Use standardized bsp_cleanup() which can
	optionally print a message, poll for user to press key, and call
	bsp_reset(). Using this eliminates the various bsp_cleanup()
	implementations which had their own implementation and variety of
	string constants.
	* startup/bspreset.c: New file.
	* startup/bspclean.c: Removed.

2008-09-22	Sebastian Huber <sebastian.huber@embedded-brains.de>

	* startup/linkcmds.base: Fixed wrong section size symbols.

2008-09-20	Joel Sherrill <joel.sherrill@oarcorp.com>

	* Makefile.am, include/bsp.h, network_5200/network.c, start/start.S,
	startup/bspstart.c, startup/cpuinit.c: Use top level shared
	bsp_get_work_area() implementation. Augment it to know about U-Boot.
	* startup/bspgetworkarea.c: Removed.

2008-09-18	Joel Sherrill <joel.sherrill@oarcorp.com>

	* include/bsp.h: Remove unnecessary boilerplate comments.

2008-09-18	Joel Sherrill <joel.sherrill@oarcorp.com>

	* include/bsp.h: Eliminate definitions of BSP_LIBIO_MAX_FDS since this
	is NOT used anywhere.

2008-09-16	Joel Sherrill <joel.sherrill@oarcorp.com>

	* startup/bspgetworkarea.c, startup/linkcmds.base: Do some prep work in
	anticipation of gen5200 and gen83xx being able to shared
	bsp_get_work_area() implementation.

2008-09-16	Joel Sherrill <joel.sherrill@oarcorp.com>

	* clock/clock.c, startup/bspstart.c: Remove unnecessary includes of
	rtems/libcsupport.h and rtems/libio.h.

2008-09-15	Joel Sherrill <joel.sherrill@oarcorp.com>

	* Makefile.am, startup/bspstart.c: Use shared bsp_get_work_area() in
	its own file and rely on BSP Framework to perform more
	initialization.
	* startup/bspgetworkarea.c: New file.

2008-09-12	Joel Sherrill <joel.sherrill@OARcorp.com>

	* network_5200/network.c: Remove use of boolean.

2008-09-10	Joel Sherrill <joel.sherrill@oarcorp.com>

	* include/bsp.h, startup/bspclean.c: Review of all bsp_cleanup()
	implementations. In this phase, all prototypes were removed from
	bsp.h and empty implementations were removed and made to use the
	shared stub.

2008-09-08	Ralf Corsépius <ralf.corsepius@rtems.org>

	* i2c/i2c.c: Remove rtems_boolean having crept in again.

2008-09-08	Sebastian Huber <sebastian.huber@embedded-brains.de>

	* include/mscan-base.h: Added bit timing macros.

2008-09-08      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>

	* i2c/i2c.c, i2c/i2cdrv.c, i2c/mpc5200mbus.c, i2c/mpc5200mbus.h,
	include/i2c.h:
	converted done_arg to a void pointer 
	
2008-09-06	Ralf Corsépius <ralf.corsepius@rtems.org>

	* bestcomm/bestcomm_glue.c, ide/pcmcia_ide.c, tod/todcfg.c:
	Convert to "bool".

2008-09-05	Ralf Corsépius <ralf.corsepius@rtems.org>

	* i2c/i2c.c, i2c/i2cdrv.c: Convert to "bool".

2008-09-04	Sebastian Huber <sebastian.huber@embedded-brains.de>

	* include/mscan-base.h, mscan/mscan-base.c, mscan/mscan.c,
	mscan/mscan_int.h: Improved parameter checks for bit rate function.

2008-09-03	Joel Sherrill <joel.sherrill@oarcorp.com>

	* Makefile.am, bestcomm/load_task.c,
	bestcomm/task_api/tasksetup_general.h: Eliminate requirement to build
	bestcomm as a relocatable lump. This should reduce the minimum
	footprint considerably.

2008-09-03	Sebastian Huber <sebastian.huber@embedded-brains.de>

	* irq/irq.h, irq/irq_asm.h, irq/irq_init.c, vectors/vectors.S,
	vectors/vectors.h, vectors/vectors_init.c: Removed files.

	* include/irq-config.h, include/irq.h, include/mscan-base.h,
	mscan/mscan-base.c, startup/linkcmds.base: New files.

	* mscan/mscan.c, mscan/mscan_int.h: Moved general MSCAN functions into
	separate header and source files (include/mscan-base.h and
	mscan/mscan-base.c).  Formatted code.

	* bestcomm/bestcomm_glue.c, bestcomm/load_task.c, clock/clock.c,
	console/console.c, i2c/mpc5200mbus.c, ide/idecfg.c, ide/pcmcia_ide.c,
	include/bsp.h, irq/irq.c, network_5200/network.c,
	slicetimer/slicetimer.c, start/start.S, startup/bspclean.c,
	startup/bspstart.c, startup/cpuinit.c: Converted to use shared
	exception and interrupt code.

	* startup/linkcmds, startup/linkcmds.brs5l, startup/linkcmds.icecube,
	startup/linkcmds.pm520: Changed to include new file
	startup/linkcmds.base.  Supports small data area now.

	* configure.ac, Makefile.am, bsp_specs, preinstall.am: Update.

2008-08-25	Sebastian Huber <sebastian.huber@embedded-brains.de>

	* startup/cpuinit.h: Uses now powerpc-utility.h.  Changed invalid usage
	of a boolean type to a proper integer type in calc_dbat_regvals().

2008-08-20	Ralf Corsépius <ralf.corsepius@rtems.org>

	* clock/clock.c, irq/irq_init.c, vectors/vectors.h,
	vectors/vectors_init.c: Add missing prototypes.

2008-08-01	Sebastian Huber <sebastian.huber@embedded-brains.de>

	* start/start.S: Clear environment pointer for bootcard.

2008-07-29	Chris Johns <chrisj@rtems.org>

	* ide/pcmcia_ide.c: Updated to the libblock changes.

2008-07-01	Joel Sherrill <joel.sherrill@oarcorp.com>

	* Makefile.am, include/bsp.h: Add bsp_uboot_getenv() to obtain U-Boot
	environment variables.
	* startup/uboot_support.c: New file.

2008-06-10	Joel Sherrill <joel.sherrill@oarcorp.com>

	* irq/irq.c: Add units.

2008-06-06	Joel Sherrill <joel.sherrill@oarcorp.com>

	* include/bsp.h, irq/irq.c, irq/irq_init.c, startup/bspclean.c,
	startup/bspstart.c: Slightly better names for IRQ benchmarking. Make
	sure the routines are present all the time.

2008-05-22	Joel Sherrill <joel.sherrill@oarcorp.com>

	* console/console.c: Remove explicit switch and call
	termios_baud_to_number().

2008-05-22	Joel Sherrill <joel.sherrill@oarcorp.com>

	* console/console.c: Properly inform termios of our initial baud rate.
	If it is not the default, this causes problems when an application
	changes any termios attributes since termios thinks our baud rate is
	one thing when in fact, it is another.

2008-05-15	Joel Sherrill <joel.sherrill@OARcorp.com>

	* startup/bspstart.c: Add capability for bootcard.c BSP Initialization
	Framework to ask the BSP where it has memory for the RTEMS Workspace
	and C Program Heap. These collectively are referred to as work area.
	If the BSP supports this, then it does not have to include code to
	split the available memory between the two areas. This reduces the
	amount of code in the BSP specific bspstart.c file. Additionally, the
	shared framework can initialize the C Library, call
	rtems_debug_enable(), and dirty the work area memory. Until most/all
	BSPs support this new capability, if the BSP supports this, it should
	call RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION from its configure.ac.
	When the transition is complete, this autoconf macro can be removed.

2008-05-14	Joel Sherrill <joel.sherrill@OARcorp.com>

	* Makefile.am: Rework to avoid .rel files.

2008-05-12	Joel Sherrill <joel.sherrill@OARcorp.com>

	* startup/bspstart.c: Refactored and renamed initialization routines to
	rtems_initialize_data_structures, rtems_initialize_before_drivers,
	rtems_initialize_device_drivers, and
	rtems_initialize_start_multitasking. This opened the sequence up so
	that bootcard() could provide a more robust and flexible framework
	which is easier to explain and understand. This also lays the
	groundwork for sharing the division of available memory between the
	RTEMS workspace and heap and the C library initialization across all
	BSPs.

2008-03-03	Joel Sherrill <joel.sherrill@OARcorp.com>

	* startup/linkcmds, startup/linkcmds.brs5l, startup/linkcmds.icecube,
	startup/linkcmds.pm520: Add wildcard to gcc_except_table section so
	programs compiled with gcc 4.3.x can link.

2008-01-11	Joel Sherrill <joel.sherrill@oarcorp.com>

	* configure.ac, irq/irq.c, startup/bspclean.c, startup/bspstart.c: Add
	ALLOW_IRQ_NESTING option. The MPC5200 has a settle time after
	acknowledging the IRQs and currently the BSP does not account for
	that. After acknowledging an interrupt, it currently gets a second
	spurious IRQ a significant percentage of the time. Rename to
	BENCHMARK_IRQ_PROCESSING and get it working again. Under one test
	load, not nesting interrupts resulted in a 50% reduction in the
	number of IRQs and an ~30% reduction in time spent in IRQs.

2007-12-18	Joel Sherrill <joel.sherrill@OARcorp.com>

	* startup/linkcmds: Spacing.
	* startup/linkcmds.brs5l: Add wildcard to .bss section.

2007-12-14	Joel Sherrill <joel.sherrill@oarcorp.com>

	* irq/irq.c, startup/bspclean.c, startup/bspstart.c: I give. The code
	is now in conditionally so I can avoid putting it in accidently
	again.

	* startup/bspclean.c: Revert patch with test code.

2007-12-11	Joel Sherrill <joel.sherrill@OARcorp.com>

	* irq/irq.c: Revert accidentally committed test code.

2007-12-11	Joel Sherrill <joel.sherrill@OARcorp.com>

	* bsp_specs, clock/clock.c, include/bsp.h, irq/irq.c,
	startup/bspclean.c, startup/bspstart.c: Eliminate copies of the
	Configuration Table. Use the RTEMS provided accessor macros to obtain
	configuration fields.

2007-12-06	Joel Sherrill <joel.sherrill@oarcorp.com>

	* include/mpc5200.h: Expand tabs.

2007-12-05	Joel Sherrill <joel.sherrill@oarcorp.com>

	* include/bsp.h: Correct BSP specific Idle thread support.

2007-12-05	Till Straumann <strauman@slac.stanford.edu>

	* irq/irq_init.c, irq_asm.S:
	Converted exception vector names to new ones
	(qualified by <cpu_type> if non-std ppc exceptions).

2007-12-04	Joel Sherrill <joel.sherrill@OARcorp.com>

	* startup/bspstart.c: Move interrupt_stack_size field from CPU Table to
	Configuration Table. Eliminate CPU Table from all ports. Delete
	references to CPU Table in all forms.

2007-12-04	Joel Sherrill <joel.sherrill@oarcorp.com>

	* clock/clock.c: Fix typo.

2007-12-03	Joel Sherrill <joel.sherrill@oarcorp.com>

	* irq/irq.c: Spacing.

2007-12-03	Joel Sherrill <joel.sherrill@OARcorp.com>

	* startup/bspstart.c: Moved most of the remaining CPU Table fields to
	the Configuration Table. This included pretasking_hook,
	predriver_hook, postdriver_hook, idle_task, do_zero_of_workspace,
	extra_mpci_receive_server_stack, stack_allocate_hook, and
	stack_free_hook. As a side-effect of this effort some multiprocessing
	code was made conditional and some style clean up occurred.

2007-11-30	Till Straumann <strauman@slac.stanford.edu>

	* startup/bspstart: removed _Cpu_table.exceptions_in_RAM.

2007-11-30	Till Straumann <strauman@slac.stanford.edu>

	* irq/irq.h, irq/irq_init.c: Removed the definition
	of ASM_IRQ_VECTOR_BASE; this symbol was only use to
	initialize the irqBase member of the rtems_irq_global_settings
	struct. However, irqBase is an rtems_irq_symbolic_name,
	so using BSP_LOWEST_OFFSET is more appropriate.

2007-11-28	Joel Sherrill <joel.sherrill@OARcorp.com>

	* clock/clock.c, startup/bspstart.c: Eliminate PowerPC specific
	elements from the CPU Table. They have been replaced with variables
	named bsp_XXX as needed.

2007-10-31	Joel Sherrill <joel.sherrill@oarcorp.com>

	* include/mpc5200.h: Fix typo.

2007-10-30	Joel Sherrill <joel.sherrill@oarcorp.com>

	* include/mpc5200.h: Fix constants off by one nibble.

2007-10-30	Joel Sherrill <joel.sherrill@oarcorp.com>

	* include/mpc5200.h: Added some simple interrupt GPIO constants.

2007-10-26	Joel Sherrill <joel.sherrill@oarcorp.com>

	* irq/irq.h: Fixed typos.

2007-09-21	Joel Sherrill <joel.sherrill@OARcorp.com>

	* network_5200/network.c: Add multicast support.

2007-09-12	Joel Sherrill <joel.sherrill@OARcorp.com>

	PR 1257/bsps
	* irq/irq.c: Code outside of cpukit should use the public API for
	rtems_interrupt_disable/rtems_interrupt_enable. By bypassing the
	public API and directly accessing _CPU_ISR_Disable and
	_CPU_ISR_Enable, they were bypassing the compiler memory barrier
	directive which could lead to problems. This patch also changes the
	type of the variable passed into these routines and addresses minor
	style issues.

2007-09-05	Joel Sherrill <joel.sherrill@oarcorp.com>

	* irq/irq.h: Reformat -- make things line up.

2007-08-28	Joel Sherrill <joel.sherrill@oarcorp.com>

	* console/console.c: Add missing semi-colon.

2007-08-06	Joel Sherrill <joel.sherrill@OARcorp.com>

	* Makefile.am, README.IceCube, preinstall.am, include/bsp.h,
	vectors/vectors.S: Rename EP5200 to IceCube since that is the
	nickname for the Freescale evaluation board it is based upon. BSP was
	tested on a Freescale MPC5200LITE.

2007-08-02	Joel Sherrill <joel.sherrill@oarcorp.com>

	* ide/pcmcia_ide.c: Added prototype of mpc5200_pcmciaide_dma_blockop to
	eliminate warning.

2007-08-02	Joel Sherrill <joel.sherrill@oarcorp.com>

	* Makefile.am: Add shared ShowBATS().
	* startup/cpuinit.c: Split out BAT initialization into subroutine
	that is defined based upon conditionals set.  More critically
	added code to detect and correct for a buggy U-Boot found on
	some Freescale LITE5200B boards which report Flash memory to
	be for 32MB at 0xFF000000 instead of 0xFE000000.  If we use
	the reported information, the system gives an exception just
	after the BAT is programmed.
	* vectors/vectors_init.c: Turn off message unless verbose is on.

2007-07-18	Joel Sherrill <joel.sherrill@oarcorp.com>

	* Makefile.am, vectors/vectors_init.c: Print stack trace on exception.

2007-07-12	Joel Sherrill <joel.sherrill@OARcorp.com>

	* startup/linkcmds.brs5l: Add .jcr section.

2007-07-11	Joel Sherrill <joel.sherrill@oarcorp.com>

	* README.IceCube: New file.

2007-07-11	Joel Sherrill <joel.sherrill@oarcorp.com>

	* console/console.c: Fix typo accidentally introduced.
	* network_5200/network.c: Fix warning.

2007-07-11	Joel Sherrill <joel.sherrill@oarcorp.com>

	* startup/linkcmds.ep5200: Add .jcr section.

2007-07-10	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>

	* bsp_specs, startup/linkcmds, startup/linkcmds.pm520: 
	add c++ support again
	* preinstall.am: some fixes

2007-07-06	Joel Sherrill <joel.sherrill@oarcorp.com>

	* Makefile.am: Add startup/bspclean.c
	* console/console.c: Remove warning.
	* include/bsp.h: Add conditionals for prompt for reset and resetting
	board.
	* start/start.S: Remove if 1 around section.
	* vectors/vectors_init.c: Do not print unless noisy init enabled.
	* startup/bspclean.c: New file. Will prompt for reset and reset.

2007-07-06	Joel Sherrill <joel.sherrill@oarcorp.com>

	* clock/clock.c, console/console.c: Add clock HW initialization missed
	in earlier conversion.

2007-07-06	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>

	* irq_init.c, Makefile.am: adapted to shared exception code

2007-06-22	Joel Sherrill <joel.sherrill@oarcorp.com>

	* clock/clock.c, network_5200/network.c: Convert to using clock driver
	template.

2007-06-22	Joel Sherrill <joel.sherrill@OARcorp.com>

	* startup/linkcmds.brs5l: Add missing wild card on .sdata section so
	all class examples build.

2007-06-21	Joel Sherrill <joel.sherrill@oarcorp.com>

	* clock/clock.c: Add nanoseconds since last tick support.

2007-06-20	Joel Sherrill <joel.sherrill@oarcorp.com>

	Add Embedded Planets EP5200 which is the same as the Freescale
	5200Lite (a.k.a. IceCube) evaluation board.
	* Makefile.am: Add linkcmds.ep5200.
	Add -DMPC5200_BAPI_LIBC_HEADERS to remove some warnings in bestcomm.
	* preinstall.am: Add linkcmds.ep5200.
	* clock/clock.c: Correct math for prescaler/counter when bus speed
	is high enough to require multiple passes of loop.
	* console/console.c: Use same math for initial baud rate as when it
	is changed via ioctl.  When HAS_UBOOT is defined, initialize console
	to the same baud as it was with U-Boot.
	* include/bsp.h: Add EP5200 and console boot baud support.
	* include/mpc5200.h: Spacing.
	* startup/bspstart.c: If HAS_UBOOT and SHOW_MORE_INIT_SETTINGS are
	both defined, dump the U-Boot BD info structure.
	* vectors/vectors.S: ep5200 cannot use vectors segment.  When loading
	it, U-Boot freezes.  Besides, U-Boot can automatically start the BSP
	so we do not have to run from board reset.
	* startup/linkcmds.ep5200: New file.

2007-04-17	Ralf Corsépius <ralf.corsepius@rtems.org>

	* mscan/mscan.c: Use size_t for message sizes. Remove absurd type
	  cast.

2007-04-12	Ralf Corsépius <ralf.corsepius@rtems.org>

	* bsp_specs: Remove qrtems_debug.

2007-04-06	Ralf Corsépius	<ralf.corsepius@rtems.org>

	* bsp_specs: Remove lib (Now expected to exist in GCC).

2007-03-12	Joel Sherrill <joel@OARcorp.com>

	* clock/clock.c, console/console.c, ide/pcmcia_ide.c, irq/irq.c,
	irq/irq.h, irq/irq_asm.S, irq/irq_init.c, nvram/nvram.c,
	nvram/nvram.h, slicetimer/slicetimer.c, startup/bspstart.c,
	vectors/vectors.h, vectors/vectors_init.c: Correct license URL and/or
	fix mistake in copyright notice. Both of these mistakes appear to be
	from code submitted after these changes were made previously.

2007-03-11	Joel Sherrill <joel@OARcorp.com>

	* startup/bspstart.c: Remove assignments of
	Cpu_table.do_zero_of_workspace to TRUE since TRUE is the default
	value in boot_card.c

2007-03-10	Joel Sherrill <joel@OARcorp.com>

	PR 1227/bsps
	* include/bsp.h: Remove MAX_LONG_TEST_DURATION and
	MAX_SHORT_TEST_DURATION. They are obsolete and unused.

2007-01-23      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>

	* console/console.c: corrected typo in UART error handler (usage
	* of ISR_PE instead of ISR_OE)
	
2006-12-15	Ralf Corsépius <ralf.corsepius@rtems.org>

	* bestcomm/load_task.c: Remove bogus casts.
	* network_5200/network.c: Use ioctl_command_t as arg to ioctl functions.

2006-12-02	Ralf Corsépius <ralf.corsepius@rtems.org>

	* configure.ac: New BUG-REPORT address.

2006-11-15	Joel Sherrill <joel@OARcorp.com>

	* Makefile.am: Merge c_rtems_main() into boot_card(). This eliminated a
	file and simplified initialization.

2006-10-17	Ralf Corsépius <ralf.corsepius@rtems.org>

	* Makefile.am: Remove superfluous -DASM.

2006-10-17	Ralf Corsépius <ralf.corsepius@rtems.org>

	* configure.ac: Require autoconf-2.60. Require automake-1.10.

2006-10-17	Ralf Corsépius <ralf.corsepius@rtems.org>

	* clock/clock.c, console/console.c, ide/pcmcia_ide.c,
	ide/pcmcia_ide.h, irq/irq.c, irq/irq.h, irq/irq_asm.S,
	irq/irq_init.c, nvram/m93cxx.h, nvram/nvram.c, nvram/nvram.h,
	slicetimer/slicetimer.c, start/start.S, startup/bspstart.c,
	startup/cpuinit.c, vectors/vectors.S, vectors/vectors_init.c:
	Convert to utf-8.

2006-09-11	Joel Sherrill <joel@OARcorp.com>

	* include/mpc5200.h, network_5200/network.c: Convert C++ style comments
	to C style.

2006-08-15	Joel Sherrill <joel@OARcorp.com>

	* Makefile.am, preinstall.am, startup/linkcmds, startup/linkcmds.brs5l,
	startup/linkcmds.pm520: Add support for missing .rela sections.
	Install linkcmds.

2006-08-08      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>

	* linkcmds.brs5l:
	(PR1117) Add  startup/linkcmds.brs5l

2006-06-28      Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>

	* Makefile.am, preinstall.am: 
	(PR1117) Add  startup/linkcmds.brs5l, slicetimer.h, nvram.h 
	to distributed files, add start/start.S to startup sources

	* bestcomm/bestcomm_glue.c: 
	(PR1117) make SDMA interrupt operations interrupt save
	
	* bsp_specs: (PR1117) move ecrti to proper location

	* console/console.c: (PR1117) round baudrate divider to nearest match

	* include/bsp.h: (PR1117) activate interrupt for ATA, 
	modify calculation of ROM size, add BSP_Convert_decrementer

	* include/mpc5200.h: (PR1117) add some register definitions

	* include/tm27.h: 
	(PR1117) adapt to make tm27 compile again with this BSP

	* mscan/mscan.[ch]:
	(PR1117) many improvements and fixes, 
	transmit queue added, 
	baud rate settings adapted

	* network/network.c: 
	(PR1117) add handler code to detect and restart FEC on DMA overflow

	* start/start.S:
	(PR1117) fixed some typos and minor bugs
	enable FPU in start sequence

	* startup/linkcmds:
	(PR1117) removed, no longer used
	
	* startup/linkcmds.brs5l:
	(PR1117) added

	* tod/pcf8563.c: 
	(PR1117) fixed bug which read wrong hour from RTC

2006-03-08	Joel Sherrill <joel@OARcorp.com>

	* startup/linkcmds, startup/linkcmds.pm520: Add .gnu.linkonce.b.*
	section.

2006-02-08	Joel Sherrill <joel@OARcorp.com>

	* startup/linkcmds, startup/linkcmds.pm520: Add sections required by
	newer gcc versions.

2006-01-11	Ralf Corsepius <ralf.corsepius@rtems.org>

	* configure.ac: Remove explicit ampolish3 support (now in
	RTEMS_BSP_CONFIGURE).

2006-01-10	Ralf Corsepius <ralf.corsepius@rtems.org>

	* configure.ac: Add ampolish3 support.
	* Makefile.am: Add preinstall.am.

2006-01-09	Ralf Corsepius <ralf.corsepius@rtems.org>

	* Makefile.am: Don't include subdirs.am.

2006-01-02	Ralf Corsepius <ralf.corsepius@rtems.org>

	* vectors/asm_utils.S: Remove (Bogus, now in libcpu).

2006-01-01	Ralf Corsepius <ralf.corsepius@rtems.org>

	* bestcomm/bestcomm_glue.c, bestcomm/bestcomm_glue.h, clock/clock.c,
	console/console.c, i2c/i2cdrv.c, i2c/mpc5200mbus.c,
	i2c/mpc5200mbus.h, ide/idecfg.c, ide/pcmcia_ide.c, ide/pcmcia_ide.h,
	include/bsp.h, include/mpc5200.h, irq/irq.c, irq/irq.h,
	irq/irq_asm.S, irq/irq_init.c, mscan/mscan.c, mscan/mscan.h,
	network_5200/network.c,	nvram/m93cxx.h, nvram/nvram.c,
	nvram/nvram.h, slicetimer/slicetimer.c, slicetimer/slicetimer.h,
	start/start.S, startup/bspstart.c, startup/cpuinit.c, tod/pcf8563.c,
	tod/pcf8563.h, tod/todcfg.c, vectors/vectors.S,
	vectors/vectors_init.c: Cleanup CVS data.

2005-12-31	Ralf Corsepius <ralf.corsepius@rtems.org>

	* irq/irq.c, irq/irq_init.c, vectors/vectors_init.c:
	include <libcpu/raw_exceptions.h>.
	* include/raw_exception.h, vectors/raw_exception.c: Remove.
	Use implementation from libcpu instead.

2005-12-31	Ralf Corsepius <ralf.corsepius@rtems.org>

	* bestcomm/bestcomm_glue.c, clock/clock.c, console/console.c,
	i2c/i2c.c, i2c/i2cdrv.c, ide/idecfg.c, ide/pcmcia_ide.c,
	ide/pcmcia_ide.h, include/i2c.h, irq/irq.c, irq/irq_init.c,
	mscan/mscan.c, network_5200/network.c, nvram/nvram.c, nvram/nvram.h,
	slicetimer/slicetimer.c, startup/bspstart.c, startup/cpuinit.c,
	tod/todcfg.c, vectors/vectors_init.c: Misc include file fixes.

2005-12-31	Ralf Corsepius <ralf.corsepius@rtems.org>

	* Makefile.am, README, bsp_specs, configure.ac,
	bestcomm/bestcomm_api.c, bestcomm/bestcomm_api.h,
	bestcomm/bestcomm_glue.c, bestcomm/bestcomm_glue.h,
	bestcomm/bestcomm_priv.h, bestcomm/dma_image.c,
	bestcomm/dma_image.capi.h, bestcomm/dma_image.h,
	bestcomm/dma_image.reloc.c, bestcomm/load_task.c,
	bestcomm/tasksetup_ata.c, bestcomm/tasksetup_bdtable.c,
	bestcomm/tasksetup_crc16_dp_0.c, bestcomm/tasksetup_crc16_dp_1.c,
	bestcomm/tasksetup_fec_rx_bd.c, bestcomm/tasksetup_fec_tx_bd.c,
	bestcomm/tasksetup_gen_dp_0.c, bestcomm/tasksetup_gen_dp_1.c,
	bestcomm/tasksetup_gen_dp_2.c, bestcomm/tasksetup_gen_dp_3.c,
	bestcomm/tasksetup_gen_dp_bd_0.c, bestcomm/tasksetup_gen_dp_bd_1.c,
	bestcomm/tasksetup_gen_rx_bd.c, bestcomm/tasksetup_gen_tx_bd.c,
	bestcomm/tasksetup_lpc.c, bestcomm/tasksetup_pci_rx.c,
	bestcomm/tasksetup_pci_tx.c, bestcomm/include/mgt5200/mgt5200.h,
	bestcomm/include/mgt5200/sdma.h,
	bestcomm/task_api/bestcomm_api_mem.h,
	bestcomm/task_api/bestcomm_cntrl.h,
	bestcomm/task_api/tasksetup_bdtable.h,
	bestcomm/task_api/tasksetup_general.h, clock/clock.c,
	console/console.c, i2c/i2c.c, i2c/i2cdrv.c, i2c/mpc5200mbus.c,
	i2c/mpc5200mbus.h, ide/idecfg.c, ide/pcmcia_ide.c, ide/pcmcia_ide.h,
	include/bsp.h, include/coverhd.h, include/i2c.h, include/i2cdrv.h,
	include/mpc5200.h, include/raw_exception.h, include/tm27.h,
	include/u-boot.h, irq/irq.c, irq/irq.h, irq/irq_asm.S,
	irq/irq_init.c, mscan/mscan.c, mscan/mscan.h,
	network_5200/network.c, nvram/m93cxx.h, nvram/nvram.c,
	nvram/nvram.h, slicetimer/slicetimer.c, slicetimer/slicetimer.h,
	start/start.S, startup/bspstart.c, startup/cpuinit.c,
	startup/linkcmds, startup/linkcmds.pm520, tod/pcf8563.c,
	tod/pcf8563.h, tod/todcfg.c, vectors/asm_utils.S,
	vectors/raw_exception.c, vectors/vectors.S, vectors/vectors.h,
	vectors/vectors_init.c: New (CVS import submission by 
	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>)

2005-12-09	Thomas Doerfler <Thomas.Doerfler@embedded-brains.de>

	* Integrated gen5200 BSP to source tree