1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
|
/* Clock_init()
*
* This routine initializes the Z80386 1 on the MVME136 board.
* The tick frequency is 1 millisecond.
*
* Input parameters: NONE
*
* Output parameters: NONE
*
* COPYRIGHT (c) 1989-1997.
* On-Line Applications Research Corporation (OAR).
* Copyright assigned to U.S. Government, 1994.
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.OARcorp.com/rtems/license.html.
*
* $Id$
*/
#include <stdlib.h>
#include <bsp.h>
#include <rtems/libio.h>
#include <zilog/z8036.h>
#define MICRVAL 0xe2 /* disable lower chain, no vec */
/* set right justified addr */
/* and master int enable */
#define MCCRVAL 0xc4 /* enable T1 and port B */
/* timers independent */
#define MS_COUNT 0x07d0 /* T1's countdown constant (1 ms) */
#define T1MSRVAL 0x80 /* T1 cont. cycle/pulse output */
#define T1CSRVAL 0xc6 /* enable interrupt, allow and */
/* and trigger countdown */
#define TIMER 0xfffb0000
#define RELOAD 0x24 /* clr IP & IUS,allow countdown */
#define CLOCK_VECTOR 66
rtems_unsigned32 Clock_isrs; /* ISRs until next tick */
volatile rtems_unsigned32 Clock_driver_ticks; /* ticks since initialization */
rtems_isr_entry Old_ticker;
void Clock_exit( void );
/*
* These are set by clock driver during its init
*/
rtems_device_major_number rtems_clock_major = ~0;
rtems_device_minor_number rtems_clock_minor;
/*
* ISR Handler
*/
rtems_isr Clock_isr(
rtems_vector_number vector
)
{
Clock_driver_ticks += 1;
((volatile struct z8036_map *) TIMER)->CT1_CMD_STATUS = RELOAD;
if ( Clock_isrs == 1 ) {
rtems_clock_tick();
Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000;
}
else
Clock_isrs -= 1;
}
void Install_clock(
rtems_isr_entry clock_isr
)
{
volatile struct z8036_map *timer;
Clock_driver_ticks = 0;
Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000;
if ( BSP_Configuration.ticks_per_timeslice ) {
Old_ticker = (rtems_isr_entry) set_vector( clock_isr, CLOCK_VECTOR, 1 );
timer = (struct z8036_map *) 0xfffb0000;
timer->MASTER_INTR = MICRVAL;
timer->CT1_MODE_SPEC = T1MSRVAL;
*((rtems_unsigned16 *)0xfffb0016) = MS_COUNT; /* write countdown value */
/*
* timer->CT1_TIME_CONST_MSB = (MS_COUNT >> 8);
* timer->CT1_TIME_CONST_LSB = (MS_COUNT & 0xff);
*/
timer->MASTER_CFG = MCCRVAL;
timer->CT1_CMD_STATUS = T1CSRVAL;
/*
* Enable interrupt via VME interrupt mask register
*/
(*(rtems_unsigned8 *)0xfffb0038) &= 0xfd;
atexit( Clock_exit );
}
}
void Clock_exit( void )
{
volatile struct z8036_map *timer;
if ( BSP_Configuration.ticks_per_timeslice ) {
timer = (struct z8036_map *) 0xfffb0000;
timer->MASTER_INTR = 0x62;
timer->CT1_MODE_SPEC = 0x00;
timer->MASTER_CFG = 0xf4;
timer->CT1_CMD_STATUS = 0x00;
/* do not restore old vector */
}
}
rtems_device_driver Clock_initialize(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *pargp
)
{
Install_clock( Clock_isr );
/*
* make major/minor avail to others such as shared memory driver
*/
rtems_clock_major = major;
rtems_clock_minor = minor;
return RTEMS_SUCCESSFUL;
}
rtems_device_driver Clock_control(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *pargp
)
{
rtems_unsigned32 isrlevel;
rtems_libio_ioctl_args_t *args = pargp;
if (args == 0)
goto done;
/*
* This is hokey, but until we get a defined interface
* to do this, it will just be this simple...
*/
if (args->command == rtems_build_name('I', 'S', 'R', ' '))
{
Clock_isr(CLOCK_VECTOR);
}
else if (args->command == rtems_build_name('N', 'E', 'W', ' '))
{
rtems_interrupt_disable( isrlevel );
(void) set_vector( args->buffer, CLOCK_VECTOR, 1 );
rtems_interrupt_enable( isrlevel );
}
done:
return RTEMS_SUCCESSFUL;
}
|
