1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
|
/*
* This routine initializes the MC68360 Periodic Interval Timer
*
* The PIT has rather poor resolution, but it is easy to set up
* and requires no housekeeping once it is going.
*
* Based on the `gen68302' board support package, and covered by the
* original distribution terms.
*
* W. Eric Norum
* Saskatchewan Accelerator Laboratory
* University of Saskatchewan
* Saskatoon, Saskatchewan, CANADA
* eric@skatter.usask.ca
*
* $Id$
*/
/*
* Input parameters: NONE
*
* Output parameters: NONE
*
* COPYRIGHT (c) 1989-1998.
* On-Line Applications Research Corporation (OAR).
* Copyright assigned to U.S. Government, 1994.
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.OARcorp.com/rtems/license.html.
*/
#include <stdlib.h> /* for atexit() */
#include <bsp.h>
#include <rtems/libio.h>
#include "m68360.h"
#define CLOCK_VECTOR 120
#define CLOCK_IRQ_LEVEL 6
/*
* Clock_driver_ticks is a monotonically increasing counter of the
* number of clock ticks since the driver was initialized.
*/
volatile rtems_unsigned32 Clock_driver_ticks;
/*
* These are set by clock driver during its init
*/
rtems_device_major_number rtems_clock_major = ~0;
rtems_device_minor_number rtems_clock_minor;
char M360DefaultWatchdogFeeder = 1;
/*
* Periodic interval timer interrupt handler
*/
rtems_isr
Clock_isr (rtems_vector_number vector)
{
/*
* Perform a dummy read of DPRAM.
* This works around a bug in Rev. B of the 68360
*/
m360.dpram0[0];
/*
* Feed the watchdog
* Application code can override this by
* setting M360DefaultWatchdogFeeder to zero.
*/
if (M360DefaultWatchdogFeeder) {
m360.swsr = 0x55;
m360.swsr = 0xAA;
}
/*
* Announce the clock tick
*/
Clock_driver_ticks++;
rtems_clock_tick();
}
void
Clock_exit (void)
{
if (BSP_Configuration.ticks_per_timeslice ) {
/*
* Turn off periodic interval timer
*/
m360.pitr &= ~0xFF;
}
}
static void
Install_clock (rtems_isr_entry clock_isr)
{
Clock_driver_ticks = 0;
if ( BSP_Configuration.ticks_per_timeslice ) {
int pitr;
/*
* Choose periodic interval timer register value
* For a 25 MHz external clock the basic clock rate is
* 40 nsec * 128 * 4 = 20.48 usec/tick
*/
pitr = ((BSP_Configuration.microseconds_per_tick * 100) + 1023) / 2048;
if (pitr >= 256) {
pitr = (pitr + 255) / 512;
if (pitr >= 256)
pitr = 255;
else if (pitr == 0)
pitr = 1;
pitr |= 0x100;
}
else if (pitr == 0) {
pitr = 1;
}
m360.pitr &= ~0x1FF;
m360.picr = (CLOCK_IRQ_LEVEL << 8) | CLOCK_VECTOR;
set_vector (clock_isr, CLOCK_VECTOR, 1);
m360.pitr |= pitr;
atexit (Clock_exit);
}
}
rtems_device_driver
Clock_initialize(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *pargp
)
{
Install_clock (Clock_isr);
/*
* make major/minor avail to others such as shared memory driver
*/
rtems_clock_major = major;
rtems_clock_minor = minor;
return RTEMS_SUCCESSFUL;
}
rtems_device_driver Clock_control(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *pargp
)
{
rtems_unsigned32 isrlevel;
rtems_libio_ioctl_args_t *args = pargp;
if (args) {
/*
* This is hokey, but until we get a defined interface
* to do this, it will just be this simple...
*/
if (args->command == rtems_build_name('I', 'S', 'R', ' ')) {
Clock_isr( CLOCK_VECTOR);
}
else if (args->command == rtems_build_name('N', 'E', 'W', ' ')) {
rtems_interrupt_disable( isrlevel );
(void) set_vector( args->buffer, CLOCK_VECTOR, 1 );
rtems_interrupt_enable( isrlevel );
}
}
return RTEMS_SUCCESSFUL;
}
|
