1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
|
/* Clock_initialize
*
* This routine initializes the Timer/Counter on the Intel
* 386ex evaluation board.
*
* The tick frequency is 1 millisecond.
*
* Input parameters: NONE
*
* Output parameters: NONE
*
* COPYRIGHT (c) 1989-1998.
* On-Line Applications Research Corporation (OAR).
* Copyright assigned to U.S. Government, 1994.
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.OARcorp.com/rtems/license.html.
*
* $Id$
*/
#include <bsp.h>
#include <rtems/libio.h>
#include <stdlib.h>
#define CLOCK_VECTOR 0x20
rtems_unsigned32 Clock_isrs; /* ISRs until next tick */
volatile rtems_unsigned32 Clock_driver_ticks;
rtems_isr_entry Old_ticker;
void Clock_exit( void );
/*
* These are set by clock driver during its init
*/
rtems_device_major_number rtems_clock_major = ~0;
rtems_device_major_number rtems_clock_minor = 0;
/*
* This is the ISR handler.
*/
rtems_isr Clock_isr(
rtems_vector_number vector
)
{
/* enable_tracing(); */
Clock_driver_ticks += 1;
if ( Clock_isrs == 1 ) {
rtems_clock_tick();
Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000;
}
else
Clock_isrs -= 1;
}
void Install_clock(
rtems_isr_entry clock_isr
)
{
Clock_driver_ticks = 0;
Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000;
if ( BSP_Configuration.ticks_per_timeslice ) {
Old_ticker = ( rtems_isr_entry ) set_vector( clock_isr, CLOCK_VECTOR, 1 );
/* The following is already set up in interns.s ->
( This is test code only... production code will move the
TMRCFG stuff here )
*/
#define TMR0 0xF040
#define TMR1 0xF041
#define TMR2 0xF042
#define TMRCON 0xF043
#define TMRCFG 0xF834
outport_byte ( TMRCFG , 0x80 );
outport_byte ( TMRCON , 0x34 );
outport_byte ( TMR0 , 0xA8 );
outport_byte ( TMR0 , 0x04 );
outport_byte ( TMRCFG , 0x00 );
}
atexit( Clock_exit );
}
void Clock_exit( void )
{
if ( BSP_Configuration.ticks_per_timeslice ) {
/* should do something here */;
}
}
rtems_device_driver Clock_initialize(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *pargp
)
{
Install_clock( Clock_isr );
/*
* make major/minor avail to others such as shared memory driver
*/
rtems_clock_major = major;
rtems_clock_minor = minor;
return RTEMS_SUCCESSFUL;
}
rtems_device_driver Clock_control(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *pargp
)
{
rtems_unsigned32 isrlevel;
rtems_libio_ioctl_args_t *args = pargp;
if (args == 0)
goto done;
/*
* This is hokey, but until we get a defined interface
* to do this, it will just be this simple...
*/
if (args->command == rtems_build_name('I', 'S', 'R', ' '))
{
Clock_isr(CLOCK_VECTOR);
}
else if (args->command == rtems_build_name('N', 'E', 'W', ' '))
{
rtems_interrupt_disable( isrlevel );
(void) set_vector( args->buffer, CLOCK_VECTOR, 1 );
rtems_interrupt_enable( isrlevel );
}
done:
return RTEMS_SUCCESSFUL;
}
|
