1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
|
/*
* S3C2400 clock specific using the System Timer
*/
/*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#include <rtems.h>
#include <bsp/irq.h>
#include <bsp.h>
#include <s3c24xx.h>
void Clock_isr(rtems_irq_hdl_param arg);
static void clock_isr_on(const rtems_irq_connect_data *unused);
static void clock_isr_off(const rtems_irq_connect_data *unused);
static int clock_isr_is_on(const rtems_irq_connect_data *irq);
rtems_irq_connect_data clock_isr_data = {
.name = BSP_INT_TIMER4,
.hdl = Clock_isr,
.handle = NULL,
.on = clock_isr_on,
.off = clock_isr_off,
.isOn = clock_isr_is_on,
};
/**
* When we get the clock interrupt
* - clear the interrupt bit?
* - restart the timer?
*/
#define Clock_driver_support_at_tick() \
do { \
ClearPending(BIT_TIMER4); \
} while(0)
/**
* Installs the clock ISR. You shouldn't need to change this.
*/
#define Clock_driver_support_install_isr( _new ) \
BSP_install_rtems_irq_handler(&clock_isr_data)
/**
* Initialize the hardware for the clock
* - Set the frequency
* - enable it
* - clear any pending interrupts
*
* Since you may want the clock always running, you can
* enable interrupts here. If you do so, the clock_isr_on(),
* clock_isr_off(), and clock_isr_is_on() functions can be
* NOPs.
*/
#define Clock_driver_support_initialize_hardware() \
do { \
uint32_t cr; \
uint32_t freq; \
/* set MUX for Timer4 to 1/16 */ \
cr=rTCFG1 & 0xFFF0FFFF; \
rTCFG1=(cr | (3<<16)); \
freq = get_PCLK(); \
/* set TIMER4 counter, input freq=PLCK/16/16Mhz*/ \
freq = (freq /16)/16; \
rTCNTB4 = ((freq / 1000) * rtems_configuration_get_microseconds_per_tick()) / 1000; \
/*unmask TIMER4 irq*/ \
rINTMSK&=~BIT_TIMER4; \
/* start TIMER4 with autoreload */ \
cr=rTCON & 0xFF8FFFFF; \
rTCON=(cr|(0x6<<20)); \
rTCON=(cr|(0x5<<20)); \
} while (0)
/**
* Enables clock interrupt.
*
* If the interrupt is always on, this can be a NOP.
*/
static void clock_isr_on(const rtems_irq_connect_data *unused)
{
}
/**
* Disables clock interrupts
*
* If the interrupt is always on, this can be a NOP.
*/
static void clock_isr_off(const rtems_irq_connect_data *unused)
{
return;
}
/**
* Tests to see if clock interrupt is enabled, and returns 1 if so.
* If interrupt is not enabled, returns 0.
*
* If the interrupt is always on, this always returns 1.
*/
static int clock_isr_is_on(const rtems_irq_connect_data *irq)
{
return 1;
}
#define CLOCK_DRIVER_USE_DUMMY_TIMECOUNTER
/* Make sure to include this, and only at the end of the file */
#include "../../../shared/dev/clock/clockimpl.h"
|
