summaryrefslogtreecommitdiffstats
path: root/bsps/arm/lpc24xx/start/start-config-emc-static.c
blob: 5f39da3a7283aac2108d57a3f587265c3af94d56 (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
/**
 * @file
 *
 * @ingroup RTEMSBSPsARMLPC24XX
 *
 * @brief BSP start EMC static memory configuration.
 */

/*
 * Copyright (c) 2011 embedded brains GmbH.  All rights reserved.
 *
 * The license and distribution terms for this file may be
 * found in the file LICENSE in this distribution or at
 * http://www.rtems.org/license/LICENSE.
 */

#include <bsp/start-config.h>
#include <bsp/lpc24xx.h>

BSP_START_DATA_SECTION const lpc24xx_emc_static_chip_config
   lpc24xx_start_config_emc_static_chip [] = {
#if defined(LPC24XX_EMC_M29W160E)
  /*
   * Static Memory 1: Numonyx M29W160EB
   *
   * 1 clock cycle = 1/72MHz = 13.9ns
   */
  {
    .chip_select = (volatile lpc_emc_static *) EMC_STA_BASE_1,
    .config = {
      /*
       * 16 bit, page mode disabled, active LOW chip select, extended wait
       * disabled, writes not protected, byte lane state LOW/LOW (!).
       */
      .config = 0x81,

      /* 1 clock cycles delay from the chip select 1 to the write enable */
      .waitwen = 0,

      /*
       * 0 clock cycles delay from the chip select 1 or address change
       * (whichever is later) to the output enable
       */
      .waitoen = 0,

      /* 7 clock cycles delay from the chip select 1 to the read access */
      .waitrd = 0x6,

      /*
       * 32 clock cycles delay for asynchronous page mode sequential accesses
       */
      .waitpage = 0x1f,

      /* 5 clock cycles delay from the chip select 1 to the write access */
      .waitwr = 0x3,

      /* 16 bus turnaround cycles */
      .waitrun = 0xf
    }
  }
#elif defined(LPC24XX_EMC_M29W320E70)
  /* Static Memory 0: M29W320E70 */
  {
    .chip_select = (volatile lpc_emc_static *) EMC_STA_BASE_0,
    .config = {
      /*
       * 16 bit, page mode disabled, active LOW chip select, extended wait
       * disabled, writes not protected, byte lane state LOW/LOW.
       */
      .config = 0x81,

      /* 30ns (tWHWL) */
      .waitwen = LPC24XX_PS_TO_EMCCLK(30000, 1),

      /* 0ns */
      .waitoen = LPC24XX_PS_TO_EMCCLK(0, 1),

      /* 70ns (tAVQV, tELQV) */
      .waitrd = LPC24XX_PS_TO_EMCCLK(70000, 1),

      /* 70ns (tAVQV, tELQV) */
      .waitpage = LPC24XX_PS_TO_EMCCLK(70000, 1),

      /* max(30ns (tWHWL) + 45ns (tWLWH), 70ns (tAVAV)) */
      .waitwr = LPC24XX_PS_TO_EMCCLK(75000, 2),

      /* 25ns (tEHQZ) */
      .waitrun = LPC24XX_PS_TO_EMCCLK(25000, 1)
    }
  }
#elif defined(LPC24XX_EMC_SST39VF3201)
  /* Static Memory 0: SST39VF3201 */
  {
    .chip_select = (volatile lpc_emc_static *) EMC_STA_BASE_0,
    .config = {
      /*
       * 16 bit, page mode disabled, active LOW chip select, extended wait
       * disabled, writes not protected, byte lane state LOW/LOW.
       */
      .config = 0x81,

      /* 0ns (tCS, tAS) */
      .waitwen = LPC24XX_PS_TO_EMCCLK(0, 1),

      /* 0ns (tOES) */
      .waitoen = LPC24XX_PS_TO_EMCCLK(0, 1),

      /* 70ns (tRC) */
      .waitrd = LPC24XX_PS_TO_EMCCLK(70000, 1),

      /* 70ns (tRC) */
      .waitpage = LPC24XX_PS_TO_EMCCLK(70000, 1),

      /* 20ns (tCHZ, TOHZ) */
      .waitwr = LPC24XX_PS_TO_EMCCLK(20000, 2),

      /* 20ns (tCHZ, TOHZ) */
      .waitrun = LPC24XX_PS_TO_EMCCLK(20000, 1)
    }
  }
#endif
};

BSP_START_DATA_SECTION const size_t
  lpc24xx_start_config_emc_static_chip_count =
    sizeof(lpc24xx_start_config_emc_static_chip)
      / sizeof(lpc24xx_start_config_emc_static_chip [0]);