#
#  Config file for a Radstone Technology Plc. PowerPC 60x based VME board
#
#  $Id: ppcn_60x.cfg
#

include $(RTEMS_ROOT)/make/custom/default.cfg

RTEMS_CPU=powerpc
RTEMS_CPU_MODEL=ppc603e

# This is the actual bsp directory used during the build process.

RTEMS_BSP_FAMILY=ppcn_60x

#  This contains the compiler options necessary to select the CPU model
#  This section makes the target dependent options file.

#  PPCN_60X_USE_DINK           (ppcn_60x_bsp)
#  PPCN_60X_USE_NONE          (ppcn_60x_bsp)
#     The Score603e board can be configured with 3 ROM monitors.  Only two
#     are appropriate for use with RTEMS.  Set exactly one of these to "1"
#     to indicate which ROM monitor is on the board you are using.
#
#  PPC_VECTOR_FILE_BASE (ppc)
#     This defines the base address of the exception table.
#     NOTE: Vectors are actually at 0xFFF00000 but file starts at offset 0x0100
#
#  PPC_USE_SPRG (RTEMS PowerPC port)
#     If defined, then the PowerPC specific code in RTEMS will use some
#     of the special purpose registers to slightly optimize interrupt
#     response time.  The use of these registers can conflict with 
#     other tools like debuggers.
#
#  PPC_USE_DATA_CACHE (RTEMS PowerPC port)
#     If defined, then the PowerPC specific code in RTEMS will use 
#     data cache instructions to optimize the context switch code.
#     This code can conflict with debuggers or emulators.
#

define make-target-options
	@echo "#define PPCN_60X_USE_DINK 1"                   >>$@
	@echo "#define PPCN_60X_USE_NONE 0"                   >>$@
	@echo "#define PPC_USE_DATA_CACHE 1"                   >>$@
	@echo "#define PPC_VECTOR_FILE_BASE 0x0100"            >>$@
	@echo "#define PPC_USE_SPRG  0"                        >>$@
endef

#  This contains the compiler options necessary to select the CPU model
#  and (hopefully) optimize for it. 
#
CPU_CFLAGS = -mcpu=603

# optimize flag: typically -0, could use -O4 or -fast
# -O4 is ok for RTEMS
# NOTE: some level of -O may be actually required by inline assembler
CFLAGS_OPTIMIZE_V=-O0 -fno-keep-inline-functions -fvolatile-global -fvolatile
#CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions -fvolatile-global -fvolatile

# The following is a linkcmds file which will work without using the
# -specs system in gcc 2.8.
#       $(LD) $(XLDFLAGS) -T $(LINKCMDS) \
#         -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)
#       $(LD) $(XLDFLAGS) -Ttext 0x20000 \
#         -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)

#       $(CC) -mmvme -mrtems -nostartfiles -mcpu=603 \
#           -o $(basename $@).exe -L $(PROJECT_RELEASE)/lib \
#            $(START_FILE) $(LINK_OBJS) \
#            $(LD_LIBS) \
#           -Wl,-\( -Wl,-lc -Wl,-lrtemsall -Wl,-lgcc -Wl,-\)
define make-exe
	$(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) \
	    -o $(basename $@).exe $(LINK_OBJS) $(LINK_LIBS)
	$(NM) -g -n $(basename $@).exe > $(basename $@).num
	$(SIZE) $(basename $@).exe
endef

# Miscellaneous additions go here

DRIVER_ARCHITECTURE=vmebus