#
#  Config file for the algorithmics p4000 evaluation board
#
#  $Id$
#

# Override default start file
START_BASE=idt_csu

CPU_DEFINES+=-DP4000 -DCPU_R4000 -DP3_DIAG -D_R4000 -D__mips=3

# This is the actual bsp directory used during the build process.
RTEMS_BSP_FAMILY=p4000

# This target does NOT support the KA9Q TCP/IP stack so ignore requests
# to enable it.
HAS_KA9Q=no

#  This section makes the target dependent options file.

#  NDEBUG (C library)
#     if defined asserts do not generate code.  This is commonly used
#     as a command line option.
#
#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
#     do not pause between screens of output in the rtems tests
#
#  STACK_CHECKER_ON (RTEMS support code)
#     If defined, stack bounds checking is enabled.
#
#  RTEMS_DEBUG (RTEMS)
#     If defined, debug checks in RTEMS and support library code are enabled.
#
#  WORKSPACE_MB (p4000)
#     Defines the size in Megabytes of the RTEMS Workspace.
#
#  HEAPSPACE_MB (p4000)
#     Defines the size in Megabytes of the C Program Heap.

define make-target-options
	@echo "/* #define NDEBUG 1 */ "                     >>$@
	@echo "#define RTEMS_TEST_NO_PAUSE 1"               >>$@
	@echo "/* #define STACK_CHECKER_ON  1 */"           >>$@
	@echo "/* #define RTEMS_DEBUG  1 */"                >>$@
	@echo "#define WORKSPACE_MB 2"                      >>$@
	@echo "#define HEAPSPACE_MB 1"                      >>$@
endef


# optimize flag: typically -0, could use -O4 or -fast
# -O4 is ok for RTEMS
CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer

# The following are definitions of make-exe which will work using ld as
# is currently required.  It is expected that as of gcc 2.8, the end user
# will be able to override parts of the compilers specs and link using gcc.

ifeq ($(RTEMS_USE_GCC272),yes)
define make-exe
	$(CC) $(LDFLAGS) -nostdlib -o $(basename $@).exe \
	    -T$(PROJECT_RELEASE)/lib/linkcmds $(LINK_FILES) $(LD_PATHS:%=-L %)
	$(OBJCOPY) -O srec $(basename $@).exe $(basename $@).srec1
        $(PACKHEX) < $(basename $@).srec1 > $(basename $@).srec
	$(RM) $(basename $@).srec1
	$(NM) -n $(basename $@).exe > $(basename $@).num
	$(SIZE) $(basename $@).exe
endef
else
define make-exe
	$(CC) $(CFLAGS) $(CFLAGS_LD) -o $(basename $@).exe $(LINK_OBJS)
	$(OBJCOPY) -O srec $(basename $@).exe $(basename $@).srec1
        $(PACKHEX) < $(basename $@).srec1 > $(basename $@).srec
	$(RM) $(basename $@).srec1
	$(NM) -n $(basename $@).exe > $(basename $@).num
	$(SIZE) $(basename $@).exe
endef
endif

# Miscellaneous additions go here