#
#  Config file for the European Space Agency ERC32
#  a V7 SPARC processor derived from the Cypress 601/602 set.
#
#  $Id$
#

include $(RTEMS_ROOT)/make/custom/default.cfg

RTEMS_CPU=sparc
RTEMS_CPU_MODEL=erc32

# This is the actual bsp directory used during the build process.
RTEMS_BSP_FAMILY=erc32

#   The -mflat avoids the use of save/restore instructions.  It has
#   a negative impact on the performance of RTEMS and should not be used.

ifeq ($(RTEMS_USE_GCC272),yes)
#     -mno-v8 says not to use v8 level instructions.  i.e. use v7 only
CPU_CFLAGS = -mno-v8 -mcypress
else
#     -mcpu=cypress says to optimize for a Cypress 60x chipset
CPU_CFLAGS = -mcpu=cypress
endif

# optimize flag: typically -0, could use -O4 or -fast
# -O4 is ok for RTEMS
CFLAGS_OPTIMIZE_V=-O4

# This target does NOT support the KA9Q TCP/IP stack so ignore requests
# to enable it.
HAS_KA9Q=no

# Override default start file
START_BASE=startsis

#  This makes the target dependent options file

#  NDEBUG (C library)
#     if defined asserts do not generate code.  This is commonly used 
#     as a command line option.
#
#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
#     do not pause between screens of output in the rtems tests
#
#  NO_TABLE_MOVE (SPARC PORT)
#     do not have a second trap table -- use the BSP's
#
#  RTEMS_DEBUG (RTEMS)
#     If defined, debug checks in RTEMS and support library code are enabled.
#
#  CONSOLE_USE_POLLED     (erc32_bsp)
#  CONSOLE_USE_INTERRUPTS (erc32_bsp)
#     The erc32 console driver can operate in either polled or interrupt mode.
#     Under the simulator (especially when FAST_UART is defined), polled seems
#     to operate better.  It is common for a task to print a line (like the
#     end of test message) and then exit.  In this case, the program returns
#     control to the simulator command line before the program has even queued
#     the output to the uart.  Thus sis has no chance of getting the data out.
#
#  SIMSPARC_FAST_IDLE (erc32_bsp)
#     If defined, speed up the clock ticks while the idle task is running so
#     time spent in the idle task is minimized.  This significantly reduces
#     the wall time required to execute the RTEMS test suites.
#

define make-target-options
	@echo "/* #define NDEBUG 1 */ "                            >>$@
	@echo "#define RTEMS_TEST_NO_PAUSE 1"                      >>$@
	@echo "/* #define RTEMS_DEBUG  1 */"                       >>$@
	@echo "#define NO_TABLE_MOVE 1"                            >>$@
	@echo "#define CONSOLE_USE_INTERRUPTS 0"                   >>$@
	@echo "#define CONSOLE_USE_POLLED ~CONSOLE_USE_INTERRUPTS" >>$@
        @echo "/* #define SIMSPARC_FAST_IDLE 1 */"                 >>$@
endef



# The following are definitions of make-exe which will work using ld as
# is currently required.  It is expected that as of gcc 2.8, the end user
# will be able to override parts of the compilers specs and link using gcc.

ifeq ($(RTEMS_USE_GCC272),yes)
define make-exe
	$(LD) -u _sbrk $(LDFLAGS) -N -T $(LINKCMDS) -o $(basename $@).exe \
	    $(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group
	$(NM) -g -n $(basename $@).exe > $(basename $@).num
	$(SIZE) $(basename $@).exe
endef
else
define make-exe
	$(CC) $(CFLAGS) $(CFLAGS_LD) -o $(basename $@).exe $(LINK_OBJS)
	$(NM) -g -n $(basename $@).exe > $(basename $@).num
	$(SIZE) $(basename $@).exe
endef
endif
# Miscellaneous additions go here