@c @c COPYRIGHT (c) 1988-1998. @c On-Line Applications Research Corporation (OAR). @c All rights reserved. @c @c $Id$ @c @chapter Partition Manager @section Introduction The partition manager provides facilities to dynamically allocate memory in fixed-size units. The directives provided by the partition manager are: @itemize @bullet @item @code{@value{DIRPREFIX}partition_create} - Create a partition @item @code{@value{DIRPREFIX}partition_ident} - Get ID of a partition @item @code{@value{DIRPREFIX}partition_delete} - Delete a partition @item @code{@value{DIRPREFIX}partition_get_buffer} - Get buffer from a partition @item @code{@value{DIRPREFIX}partition_return_buffer} - Return buffer to a partition @end itemize @section Background @subsection Partition Manager Definitions A partition is a physically contiguous memory area divided into fixed-size buffers that can be dynamically allocated and deallocated. Partitions are managed and maintained as a list of buffers. Buffers are obtained from the front of the partition's free buffer chain and returned to the rear of the same chain. When a buffer is on the free buffer chain, RTEMS uses eight bytes of each buffer as the free buffer chain. When a buffer is allocated, the entire buffer is available for application use. Therefore, modifying memory that is outside of an allocated buffer could destroy the free buffer chain or the contents of an adjacent allocated buffer. @subsection Building a Partition's Attribute Set In general, an attribute set is built by a bitwise OR of the desired attribute components. The set of valid partition attributes is provided in the following table: @itemize @bullet @item @code{@value{RPREFIX}LOCAL} - local task (default) @item @code{@value{RPREFIX}GLOBAL} - global task @end itemize Attribute values are specifically designed to be mutually exclusive, therefore bitwise OR and addition operations are equivalent as long as each attribute appears exactly once in the component list. An attribute listed as a default is not required to appear in the attribute list, although it is a good programming practice to specify default attributes. If all defaults are desired, the attribute @code{@value{RPREFIX}DEFAULT_ATTRIBUTES} should be specified on this call. The attribute_set parameter should be @code{@value{RPREFIX}GLOBAL} to indicate that the partition is to be known globally. @section Operations @subsection Creating a Partition The @code{@value{DIRPREFIX}partition_create} directive creates a partition with a user-specified name. The partition's name, starting address, length and buffer size are all specified to the @code{@value{DIRPREFIX}partition_create} directive. RTEMS allocates a Partition Control Block (PTCB) from the PTCB free list. This data structure is used by RTEMS to manage the newly created partition. The number of buffers in the partition is calculated based upon the specified partition length and buffer size, and returned to the calling task along with a unique partition ID. @subsection Obtaining Partition IDs When a partition is created, RTEMS generates a unique partition ID and assigned it to the created partition until it is deleted. The partition ID may be obtained by either of two methods. First, as the result of an invocation of the @code{@value{DIRPREFIX}partition_create} directive, the partition ID is stored in a user provided location. Second, the partition ID may be obtained later using the @code{@value{DIRPREFIX}partition_ident} directive. The partition ID is used by other partition manager directives to access this partition. @subsection Acquiring a Buffer A buffer can be obtained by calling the @code{@value{DIRPREFIX}partition_get_buffer} directive. If a buffer is available, then it is returned immediately with a successful return code. Otherwise, an unsuccessful return code is returned immediately to the caller. Tasks cannot block to wait for a buffer to become available. @subsection Releasing a Buffer Buffers are returned to a partition's free buffer chain with the @code{@value{DIRPREFIX}partition_return_buffer} directive. This directive returns an error status code if the returned buffer was not previously allocated from this partition. @subsection Deleting a Partition The @code{@value{DIRPREFIX}partition_delete} directive allows a partition to be removed and returned to RTEMS. When a partition is deleted, the PTCB for that partition is returned to the PTCB free list. A partition with buffers still allocated cannot be deleted. Any task attempting to do so will be returned an error status code. @section Directives This section details the partition manager's directives. A subsection is dedicated to each of this manager's directives and describes the calling sequence, related constants, usage, and status codes. @page @subsection PARTITION_CREATE - Create a partition @subheading CALLING SEQUENCE: @ifset is-C @c @findex rtems_partition_create @example rtems_status_code rtems_partition_create( rtems_name name, void *starting_address, rtems_unsigned32 length, rtems_unsigned32 buffer_size, rtems_attribute attribute_set, rtems_id *id ); @end example @end ifset @ifset is-Ada @example procedure Partition_Create ( Name : in RTEMS.Name; Starting_Address : in RTEMS.Address; Length : in RTEMS.Unsigned32; Buffer_Size : in RTEMS.Unsigned32; Attribute_Set : in RTEMS.Attribute; ID : out RTEMS.ID; Result : out RTEMS.Status_Codes ); @end example @end ifset @subheading DIRECTIVE STATUS CODES: @code{@value{RPREFIX}SUCCESSFUL} - partition created successfully@* @code{@value{RPREFIX}INVALID_NAME} - invalid task name@* @code{@value{RPREFIX}TOO_MANY} - too many partitions created@* @code{@value{RPREFIX}INVALID_ADDRESS} - address not on four byte boundary@* @code{@value{RPREFIX}INVALID_SIZE} - length or buffer size is 0@* @code{@value{RPREFIX}INVALID_SIZE} - length is less than the buffer size@* @code{@value{RPREFIX}INVALID_SIZE} - buffer size not a multiple of 4@* @code{@value{RPREFIX}MP_NOT_CONFIGURED} - multiprocessing not configured@* @code{@value{RPREFIX}TOO_MANY} - too many global objects @subheading DESCRIPTION: This directive creates a partition of fixed size buffers from a physically contiguous memory space which starts at starting_address and is length bytes in size. Each allocated buffer is to be of buffer_length in bytes. The assigned partition id is returned in id. This partition id is used to access the partition with other partition related directives. For control and maintenance of the partition, RTEMS allocates a PTCB from the local PTCB free pool and initializes it. @subheading NOTES: This directive will not cause the calling task to be preempted. The starting_address and buffer_size parameters must be multiples of four. Memory from the partition is not used by RTEMS to store the Partition Control Block. The following partition attribute constants are defined by RTEMS: @itemize @bullet @item @code{@value{RPREFIX}LOCAL} - local task (default) @item @code{@value{RPREFIX}GLOBAL} - global task @end itemize The PTCB for a global partition is allocated on the local node. The memory space used for the partition must reside in shared memory. Partitions should not be made global unless remote tasks must interact with the partition. This is to avoid the overhead incurred by the creation of a global partition. When a global partition is created, the partition's name and id must be transmitted to every node in the system for insertion in the local copy of the global object table. The total number of global objects, including partitions, is limited by the maximum_global_objects field in the Configuration Table. @page @subsection PARTITION_IDENT - Get ID of a partition @subheading CALLING SEQUENCE: @ifset is-C @c @findex rtems_partition_ident @example rtems_status_code rtems_partition_ident( rtems_name name, rtems_unsigned32 node, rtems_id *id ); @end example @end ifset @ifset is-Ada @example procedure Partition_Ident ( Name : in RTEMS.Name; Node : in RTEMS.Unsigned32; ID : out RTEMS.ID; Result : out RTEMS.Status_Codes ); @end example @end ifset @subheading DIRECTIVE STATUS CODES: @code{@value{RPREFIX}SUCCESSFUL} - partition identified successfully@* @code{@value{RPREFIX}INVALID_NAME} - partition name not found@* @code{@value{RPREFIX}INVALID_NODE} - invalid node id @subheading DESCRIPTION: This directive obtains the partition id associated with the partition name. If the partition name is not unique, then the partition id will match one of the partitions with that name. However, this partition id is not guaranteed to correspond to the desired partition. The partition id is used with other partition related directives to access the partition. @subheading NOTES: This directive will not cause the running task to be preempted. If node is @code{@value{RPREFIX}SEARCH_ALL_NODES}, all nodes are searched with the local node being searched first. All other nodes are searched with the lowest numbered node searched first. If node is a valid node number which does not represent the local node, then only the partitions exported by the designated node are searched. This directive does not generate activity on remote nodes. It accesses only the local copy of the global object table. @page @subsection PARTITION_DELETE - Delete a partition @subheading CALLING SEQUENCE: @ifset is-C @c @findex rtems_partition_delete @example rtems_status_code rtems_partition_delete( rtems_id id ); @end example @end ifset @ifset is-Ada @example procedure Partition_Delete ( ID : in RTEMS.ID; Result : out RTEMS.Status_Codes ); @end example @end ifset @subheading DIRECTIVE STATUS CODES: @code{@value{RPREFIX}SUCCESSFUL} - partition deleted successfully@* @code{@value{RPREFIX}INVALID_ID} - invalid partition id@* @code{@value{RPREFIX}RESOURCE_IN_USE} - buffers still in use@* @code{@value{RPREFIX}ILLEGAL_ON_REMOTE_OBJECT} - cannot delete remote partition @subheading DESCRIPTION: This directive deletes the partition specified by id. The partition cannot be deleted if any of its buffers are still allocated. The PTCB for the deleted partition is reclaimed by RTEMS. @subheading NOTES: This directive will not cause the calling task to be preempted. The calling task does not have to be the task that created the partition. Any local task that knows the partition id can delete the partition. When a global partition is deleted, the partition id must be transmitted to every node in the system for deletion from the local copy of the global object table. The partition must reside on the local node, even if the partition was created with the @code{@value{RPREFIX}GLOBAL} option. @page @subsection PARTITION_GET_BUFFER - Get buffer from a partition @subheading CALLING SEQUENCE: @ifset is-C @c @findex rtems_partition_get_buffer @example rtems_status_code rtems_partition_get_buffer( rtems_id id, void **buffer ); @end example @end ifset @ifset is-Ada @example procedure Partition_Get_Buffer ( ID : in RTEMS.ID; Buffer : out RTEMS.Address; Result : out RTEMS.Status_Codes ); @end example @end ifset @subheading DIRECTIVE STATUS CODES: @code{@value{RPREFIX}SUCCESSFUL} - buffer obtained successfully@* @code{@value{RPREFIX}INVALID_ID} - invalid partition id@* @code{@value{RPREFIX}UNSATISFIED} - all buffers are allocated @subheading DESCRIPTION: This directive allows a buffer to be obtained from the partition specified in id. The address of the allocated buffer is returned in buffer. @subheading NOTES: This directive will not cause the running task to be preempted. All buffers begin on a four byte boundary. A task cannot wait on a buffer to become available. Getting a buffer from a global partition which does not reside on the local node will generate a request telling the remote node to allocate a buffer from the specified partition. @page @subsection PARTITION_RETURN_BUFFER - Return buffer to a partition @subheading CALLING SEQUENCE: @ifset is-C @c @findex rtems_partition_return_buffer @example rtems_status_code rtems_partition_return_buffer( rtems_id id, void *buffer ); @end example @end ifset @ifset is-Ada @example procedure Partition_Return_Buffer ( ID : in RTEMS.ID; Buffer : in RTEMS.Address; Result : out RTEMS.Status_Codes ); @end example @end ifset @subheading DIRECTIVE STATUS CODES: @code{@value{RPREFIX}SUCCESSFUL} - buffer returned successfully@* @code{@value{RPREFIX}INVALID_ID} - invalid partition id@* @code{@value{RPREFIX}INVALID_ADDRESS} - buffer address not in partition @subheading DESCRIPTION: This directive returns the buffer specified by buffer to the partition specified by id. @subheading NOTES: This directive will not cause the running task to be preempted. Returning a buffer to a global partition which does not reside on the local node will generate a request telling the remote node to return the buffer to the specified partition.