@c @c COPYRIGHT (c) 1988-1999. @c On-Line Applications Research Corporation (OAR). @c All rights reserved. @c @c $Id$ @c @chapter Basic Information The questions in this category are basic questions about RTEMS. Where did it come from, why is it, what is it, when should you use it, etc.? @section What does RTEMS stand for? RTEMS is an anacronym for the Real-Time Executive for Multiprocessor Systems. Initially RTEMS stood for the Real-Time Executive for Missile Systems but as it became clear that the application domains that could use RTEMS extended far beyond missiles, the "M" changed to mean Military. At one point, there were both Ada and C implementations of RTEMS. The C version changed the "M" to mean Multiprocessor while the Ada version remained with the "M" meaning Military. @section What is RTEMS? RTEMS is a real-time executive which provides a high performance environment for embedded military applications including many features. The following is just a short list of the features avilable in RTEMS. If you are interested in something that is not on this list, please contact the RTEMS Team. Features are being added continuously. @itemize @bullet @item Standards Compliant @itemize @bullet @item POSIX 1003.1b API including threads @item RTEID/ORKID based Classic API @end itemize @item TCP/IP Stack @itemize @bullet @item high performance port of FreeBSD TCP/IP stack @item UDP, TCP @item ICMP, DHCP, RARP @item TFTP @item RPC @item FTPD @item HTTPD @item CORBA @end itemize @item Debugging @itemize @bullet @item GNU debugger (gdb) @item DDD GUI interface to GDB @item thread aware @item debug over Ethernet @item debug over Serial Port @end itemize @item Filesystem Support @itemize @bullet @item In-Memory Filesystem (IMFS) @item TFTP Client Filesystem @end itemize @item Basic Kernel Features @itemize @bullet @item multitasking capabilities @item homogeneous and heterogeneous multiprocessor systems @item event-driven, priority-based, preemptive scheduling @item optional rate monotonic scheduling @item intertask communication and synchronization @item priority inheritance @item responsive interrupt management @item dynamic memory allocation @item high level of user configurability @end itemize @end itemize @section What standards does RTEMS support? The original "Classic" RTEMS API is based on the Real-Time Executive Interface Definition (RTEID) and the Open Real-Time Kernel Interface Definition (ORKID). RTEMS also includes support for POSIX threads and real-time extensions. With the addition of file system infrastructure, RTEMS supports about 70% of the POSIX 1003.1b-1996 standard. This standard defines the programming interfaces of standard UNIX. This means that much source code that works on UNIX, also works on RTEMS. @section What processors is RTEMS available for? RTEMS is available for the following processor families: @itemize @bullet @item Motorola MC68xxx @item Motorola MC683xx @item Motorola ColdFire @item Hitachi SH @item Intel i386 @item Intel i960 @item MIPS @item PowerPC @item SPARC @item AMD A29K @item Hewlett-Packard PA-RISC @end itemize In addition, there is a port to UNIX which can be used as a prototyping and simulation environment. @section Executive vs. Kernel vs. Operating System (RTOS) The developers of RTEMS developers use the terms executive and kernel interchangeably. In the embedded system community, the terms executive or kernel are generally used to refer to small operating systems. So we consider it proper to refer to RTEMS as an executive, a kernel, or an operating system. @section Where/why was it developed? RTEMS was developed by On-Line Applications Research Corporation (OAR) for the U.S. Army Missile Command prior to that organizations merger with the Aviation Command that resulted in the new command, U. S. Army Aviation and Missile command (AMCOM). The original goal of RTEMS was to provide a portable, standards-based real-time executive for which source code was available and royalties were paid. In other words, RTEMS was open source before open source was cool. @section Are there no similar commercial products? Yes, but not all are based on standards and the open source philosophy. @section How can I get RTEMS? RTEMS is distributed by OAR Corporation via the Internet. Point your favorite browser at the following URL and following the link: @c this version should work @c @set OAR-URL http://www.OARcorp.com @c @uref{@value{OAR-URL},@value{OAR-URL}} @uref{http://www.OARcorp.com,http://www.OARcorp.com} @section What about support? OAR Corporation provides numerous services for RTEMS including support, training, and custom development. @section Are there any mailing lists? The primary RTEMS mailing list is @code{rtems-list@@oarcorp.com}. You can subscribe by sending a message with the word @b{subscribe rtems-list} as the body to @code{majordomo@@oarcorp.com}. @section Are there any license restrictions? RTEMS is licensed under a modified version of the GNU General Public License (GPL). The modification places no restrictions on the applications which use RTEMS but protects the interests of those who work on RTEMS. The TCP/IP network stack included with RTEMS is a port of the FreeBSD network stack and is licensed under different terms that also do not place restrictions on the application. @section Are there any export restrictions? No. @section RTEMS Mailing List Yes. @example rtems-users@@OARcorp.com @end example This mailing list is dedicated to the discussion of issues related to RTEMS, including GNAT/RTEMS. If you have questions about RTEMS, wish to make suggestions, or just want to pick up hints, this is a good list to subscribe to. Subscribe by sending an empty mail message to rtems-users-subscribe@@OARcorp.com. Messages sent to rtems-users@@OARcorp.com are posted to the list.