/*
 *  Mips CPU Dependent Source
 *
 *  Conversion to MIPS port by Alan Cudmore <alanc@linuxstart.com> and
 *           Joel Sherrill <joel@OARcorp.com>. 
 *
 *    These changes made the code conditional on standard cpp predefines,
 *    merged the mips1 and mips3 code sequences as much as possible,
 *    and moved some of the assembly code to C.  Alan did much of the
 *    initial analysis and rework.  Joel took over from there and
 *    wrote the JMR3904 BSP so this could be tested.  Joel also
 *    added the new interrupt vectoring support in libcpu and
 *    tried to better support the various interrupt controllers.
 *
 *  Original MIP64ORION port by Craig Lebakken <craigl@transition.com>
 *           COPYRIGHT (c) 1996 by Transition Networks Inc.
 *
 *         To anyone who acknowledges that this file is provided "AS IS"
 *         without any express or implied warranty:
 *             permission to use, copy, modify, and distribute this file
 *             for any purpose is hereby granted without fee, provided that
 *             the above copyright notice and this notice appears in all
 *             copies, and that the name of Transition Networks not be used in
 *             advertising or publicity pertaining to distribution of the
 *             software without specific, written prior permission.
 *             Transition Networks makes no representations about the 
 *             suitability of this software for any purpose.
 *
 *  COPYRIGHT (c) 1989-2001.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  $Id$
 */

#include <rtems/system.h>
#include <rtems/score/isr.h>
#include <rtems/score/wkspace.h>


/*  _CPU_Initialize
 *
 *  This routine performs processor dependent initialization.
 *
 *  INPUT PARAMETERS:
 *    cpu_table       - CPU table to initialize
 *    thread_dispatch - address of disptaching routine
 */


void _CPU_Initialize(
  rtems_cpu_table  *cpu_table,
  void      (*thread_dispatch)      /* ignored on this CPU */
)
{
  /*
   *  If there is not an easy way to initialize the FP context
   *  during Context_Initialize, then it is usually easier to
   *  save an "uninitialized" FP context here and copy it to
   *  the task's during Context_Initialize.
   */

  /* FP context initialization support goes here */

  _CPU_Table = *cpu_table;
}

/*PAGE
 *
 *  _CPU_ISR_Get_level
 *
 *  This routine returns the current interrupt level.
 */
   
unsigned32 _CPU_ISR_Get_level( void )
{
  unsigned int sr;

  mips_get_sr(sr);

#if __mips == 3
  return ((sr & SR_EXL) >> 1);

#elif __mips == 1
  return ((sr & SR_IEC) ? 0 : 1);

#else
#error "CPU ISR level: unknown MIPS level for SR handling"
#endif
}

void _CPU_ISR_Set_level( unsigned32 new_level )
{
  unsigned int sr;

  mips_get_sr(sr);

#if __mips == 3
  if ( (new_level & SR_EXL) == (sr & SR_EXL) )
    return;

  if ( (new_level & SR_EXL) == 0 ) {
    sr &= ~SR_EXL;                    /* clear the EXL bit */
    mips_set_sr(sr);
  } else {
    sr &= ~SR_IE;
    mips_set_sr(sr);                 /* first disable ie bit (recommended) */

    sr |= SR_EXL|SR_IE;              /* enable exception level */
    mips_set_sr(sr);                 /* first disable ie bit (recommended) */
  }
 
#elif __mips == 1
  if ( (new_level & SR_IEC) == (sr & SR_IEC) )
    return;

  sr &= ~SR_IEC;                    /* clear the IEC bit */
  if ( !new_level )
    sr |= SR_IEC;                   /* enable interrupts */

  mips_set_sr(sr);

#else
#error "CPU ISR level: unknown MIPS level for SR handling"
#endif

}

/*PAGE
 *
 *  _CPU_ISR_install_raw_handler
 *
 *  Input parameters:
 *    vector      - interrupt vector number
 *    old_handler - former ISR for this vector number
 *    new_handler - replacement ISR for this vector number
 *
 *  Output parameters:  NONE
 *
 */
 
void _CPU_ISR_install_raw_handler(
  unsigned32  vector,
  proc_ptr    new_handler,
  proc_ptr   *old_handler
)
{
  /*
   *  This is where we install the interrupt handler into the "raw" interrupt
   *  table used by the CPU to dispatch interrupt handlers.
   *
   *  Because all interrupts are vectored through the same exception handler
   *  this is not necessary on this port.
   */
}

/*PAGE
 *
 *  _CPU_ISR_install_vector
 *
 *  This kernel routine installs the RTEMS handler for the
 *  specified vector.
 *
 *  Input parameters:
 *    vector      - interrupt vector number
 *    old_handler - former ISR for this vector number
 *    new_handler - replacement ISR for this vector number
 *
 *  Output parameters:  NONE
 *
 */

void _CPU_ISR_install_vector(
  unsigned32  vector,
  proc_ptr    new_handler,
  proc_ptr   *old_handler
)
{
   *old_handler = _ISR_Vector_table[ vector ];

   /*
    *  If the interrupt vector table is a table of pointer to isr entry
    *  points, then we need to install the appropriate RTEMS interrupt
    *  handler for this vector number.
    */

   _CPU_ISR_install_raw_handler( vector, _ISR_Handler, old_handler );

   /*
    *  We put the actual user ISR address in '_ISR_vector_table'.  This will
    *  be used by the _ISR_Handler so the user gets control.
    */

    _ISR_Vector_table[ vector ] = new_handler;
}

/*PAGE
 *
 *  _CPU_Install_interrupt_stack
 */

void _CPU_Install_interrupt_stack( void )
{
/* we don't support this yet */
}

/*PAGE
 *
 *  _CPU_Internal_threads_Idle_thread_body
 *
 *  NOTES:
 *
 *  1. This is the same as the regular CPU independent algorithm.
 *
 *  2. If you implement this using a "halt", "idle", or "shutdown"
 *     instruction, then don't forget to put it in an infinite loop.
 *
 *  3. Be warned. Some processors with onboard DMA have been known
 *     to stop the DMA if the CPU were put in IDLE mode.  This might
 *     also be a problem with other on-chip peripherals.  So use this
 *     hook with caution.
 */

void _CPU_Thread_Idle_body( void )
{
#if __mips == 3
   for( ; ; )
     asm volatile("wait"); /* use wait to enter low power mode */
#elif __mips == 1
   for( ; ; )
     ;
#else
#error "IDLE: __mips not set to 1 or 3"
#endif
}