/* Copyright (c) 2002, Colin O'Flynn
   All rights reserved.

   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions are met:

   * Redistributions of source code must retain the above copyright
     notice, this list of conditions and the following disclaimer.

   * Redistributions in binary form must reproduce the above copyright
     notice, this list of conditions and the following disclaimer in
     the documentation and/or other materials provided with the
     distribution.

   * Neither the name of the copyright holders nor the names of
     contributors may be used to endorse or promote products derived
     from this software without specific prior written permission.

  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  POSSIBILITY OF SUCH DAMAGE. */

/* avr/io86r401.h - definitions for AT86RF401 */

#ifndef _AVR_IO86RF401_H_
#define _AVR_IO86RF401_H_ 1

/* This file should only be included from <avr/io.h>, never directly. */

#ifndef _AVR_IO_H_
#  error "Include <avr/io.h> instead of this file."
#endif

#ifndef _AVR_IOXXX_H_
#  define _AVR_IOXXX_H_ "io86r401.h"
#else
#  error "Attempt to include more than one <avr/ioXXX.h> file."
#endif

#include <avr/sfr_defs.h>

/* Status REGister */
#define SREG    _SFR_IO8(0x3F)

/* Stack Pointer */
#define SP      _SFR_IO16(0x3D)
#define SPH     _SFR_IO8(0x3E)
#define SPL     _SFR_IO8(0x3D)

/*Battery low configeration register */
#define BL_CONFIG       _SFR_IO8(0x35)

/*Button detect register*/
#define B_DET           _SFR_IO8(0x34)

/*AVR Configeration register*/
#define AVR_CONFIG      _SFR_IO8(0x33)

/* I/O registers */

/*Data in register */
#define IO_DATIN        _SFR_IO8(0x32)

/*Data out register */
#define IO_DATOUT       _SFR_IO8(0x31)

/*IO Enable register */
#define IO_ENAB         _SFR_IO8(0x30)

/* Watchdog Timer Control Register */
#define WDTCR           _SFR_IO8(0x22)

/* Bit Timer Control Register */
#define BTCR            _SFR_IO8(0x21)

#define BTCNT           _SFR_IO8(0x20)

/* 
NOTE: EEPROM name's changed to have D in front on them, per datasheet, but
you may want to remove the leading D.
*/
/* EEPROM Control Register */

/* EEPROM Address Register */
#define DEEAR           _SFR_IO8(0x1E)
#define DEEARL          _SFR_IO8(0x1E)

/* EEPROM Data Register */
#define DEEDR           _SFR_IO8(0x1D)
/* EEPROM Control Register */
#define DEECR           _SFR_IO8(0x1C)

/* Lock Detector Configuration Register 2 */
#define LOCKDET2        _SFR_IO8(0x17)

/* VCO Tuning Register*/
#define VCOTUNE         _SFR_IO8(0x16)

/* Power Attenuation Control Register */
#define PWR_ATTEN       _SFR_IO8(0x14)

/* Transmitter Control Register */
#define TX_CNTL         _SFR_IO8(0x12)

/* Lock Detector Configuration Register 1 */
#define LOCKDET1        _SFR_IO8(0x10)


/* Interrupt vectors */

/* Transmission Done, Bit Timer Flag 2 Interrupt */
#define TXDONE_vect			_VECTOR(1)
#define SIG_TXDONE			_VECTOR(1)

/* Transmit Buffer Empty, Bit Itmer Flag 0 Interrupt */
#define TXEMPTY_vect			_VECTOR(2)
#define SIG_TXBE			_VECTOR(2)

#define _VECTORS_SIZE 12

/*
 *  The Register Bit names are represented by their bit number (0-7).
 */

/* Lock Detector Configuration Register 1 - LOCKDET1 */
#define UPOK    4
#define ENKO    3
#define BOD     2
#define CS1     1
#define CS0     0

/* Transmit Control Register - TX_CNTL */
#define TXE     5
#define TXK     4
#define LOC     2

/* Power Attenuation Control Register - PWR_ATTEN */
#define PCC2        5
#define PCC1        4
#define PCC0        3
#define PCF2        2
#define PCF1        1
#define PCF0        0

/* VCO Tuning Register 6 - VCOTUNE --NOTE: [] removed from names*/
#define VCOVDET1        7
#define VCOVDET0        6
#define VCOTUNE4        4
#define VCOTUNE3        3
#define VCOTUNE2        2
#define VCOTUNE1        1
#define VCOTUNE0        0

/* Lock Detector Configuration Register 2 - LOCKDET2 --NOTE: [] removed from names*/
#define EUD         7
#define LAT         6
#define ULC2        5
#define ULC1        4
#define ULC0        3
#define LC2         2
#define LC1         1
#define LC0         0

/* Data EEPROM Control Register - DEECR */
#define BSY         3
#define EEU         2
#define EEL         1
#define EER         0

/* Data EEPROM Data Register - DEEDR */
#define ED7         7
#define ED6         6
#define ED5         5
#define ED4         4
#define ED3         3
#define ED2         2
#define ED1         1
#define ED0         0

/* Data EEPROM Address Register - DEEAR */
#define PA6     6
#define PA5     5
#define PA4     4
#define PA3     3
#define BA2     2  /* B is not a typo! */
#define BA1     1
#define BA0     0

/* Bit Timer Count Register - BTCNT */
#define C7      7
#define C6      6
#define C5      5
#define C4      4
#define C3      3
#define C2      2
#define C1      1
#define C0      0

/* Bit Timer Control Register - BTCR */
#define C9      7
#define C8      6
#define M1      5
#define M0      4
#define IE      3
#define F2      2
#define DATA    1
#define F0      0

/* Watchdog Timer Control Register - WDTCR */
#define WDTOE       4
#define WDE         3
#define WDP2        2
#define WDP1        1
#define WDP0        0

/* I/O Enable Register - IO_ENAB */
#define BOHYST      6
#define IOE5        5
#define IOE4        4
#define IOE3        3
#define IOE2        2
#define IOE1        1
#define IOE0        0

/* Note: No PORTB or whatever, this is the equivalent. */
/* I/O Data Out Register - IO_DATOUT */
#define IOO5     5
#define IOO4     4
#define IOO3     3
#define IOO2     2
#define IOO1     1
#define IOO0     0

/* Note: No PINB or whatever, this is the equivalent. */
/* I/O Data In Register - IO_DATIN */
#define IOI5     5
#define IOI4     4
#define IOI3     3
#define IOI2     2
#define IOI1     1
#define IOI0     0

/* AVR Configuration Register - AVR_CONFIG */
#define ACS1    6
#define ACS0    5
#define TM      4
#define BD      3
#define BLI     2
#define SLEEP   1
#define BBM     0

/* Button Detect Register - B_DET */
#define BD5     5
#define BD4     4
#define BD3     3
#define BD2     2
#define BD1     1
#define BD0     0

/* Battery Low Configuration Register - BL_CONFIG */
#define BL      7
#define BLV     6
#define BL5     5
#define BL4     4
#define BL3     3
#define BL2     2
#define BL1     1
#define BL0     0

/* Pointer definition   */
#define XL      r26
#define XH      r27
#define YL      r28
#define YH      r29
#define ZL      r30
#define ZH      r31

/* Constants */
#define RAMEND      0xDF
#define XRAMEND     RAMEND
#define E2END       0x7F
#define E2PAGESIZE  0
#define FLASHEND    0x07FF


/* Fuses */
#define FUSE_MEMORY_SIZE 0


/* Lock Bits */
#define __LOCK_BITS_EXIST


/* Signature */
#define SIGNATURE_0 0x1E
#define SIGNATURE_1 0x91
#define SIGNATURE_2 0x81


#endif  /* _AVR_IO86RF401_H_ */