/**
 * @file rtems/asm.h
 *
 *  This include file attempts to address the problems
 *  caused by incompatible flavors of assemblers and
 *  toolsets.  It primarily addresses variations in the
 *  use of leading underscores on symbols and the requirement
 *  that register names be preceded by a %.
 *
 *
 *  NOTE: The spacing in the use of these macros
 *        is critical to them working as advertised.
 */

/*
 *  COPYRIGHT:
 *
 *  This file is based on similar code found in newlib available
 *  from ftp.cygnus.com.  The file which was used had no copyright
 *  notice.  This file is freely distributable as long as the source
 *  of the file is noted.  This file is:
 *
 *  COPYRIGHT (c) 2000 Canon Research Centre France SA.
 *  Emmanuel Raguet, mailto:raguet@crf.canon.fr
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.rtems.com/license/LICENSE.
 *
 */

#ifndef _RTEMS_ASM_H
#define _RTEMS_ASM_H

/*
 *  Indicate we are in an assembly file and get the basic CPU definitions.
 */

#ifndef ASM
#define ASM
#endif
#include <rtems/score/cpuopts.h>
#include <rtems/score/arm.h>

/*
 *  Recent versions of GNU cpp define variables which indicate the
 *  need for underscores and percents.  If not using GNU cpp or
 *  the version does not support this, then you will obviously
 *  have to define these as appropriate.
 */

#ifndef __USER_LABEL_PREFIX__
#define __USER_LABEL_PREFIX__ _
#endif

#ifndef __REGISTER_PREFIX__
#define __REGISTER_PREFIX__
#endif

#include <rtems/concat.h>

/* Use the right prefix for global labels.  */

#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)

/* Use the right prefix for registers.  */

#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x)

/*
 *  define macros for all of the registers on this CPU
 *
 *  EXAMPLE:     #define d0 REG (d0)
 */

#define r0  REG(r0)
#define r1  REG(r1)
#define r2  REG(r2)
#define r3  REG(r3)
#define r4  REG(r4)
#define r5  REG(r5)
#define r6  REG(r6)
#define r7  REG(r7)
#define r8  REG(r8)
#define r9  REG(r9)
#define r10 REG(r10)
#define r11 REG(r11)
#define r12 REG(r12)
#define r13 REG(r13)
#define r14 REG(r14)
#define r15 REG(r15)

#define CPSR REG(CPSR)

#define SPSR REG(SPSR)

#define NUM_IRQ_VECTOR          6       // IRQ number
#define NUM_FIQ_VECTOR          7       // IRQ number
										// 										//
#define CPSR_IRQ_DISABLE        0x80    // FIQ disabled when =1
#define CPSR_FIQ_DISABLE        0x40    // FIQ disabled when =1
#define CPSR_THUMB_ENABLE       0x20    // Thumb mode when =1
#define CPSR_FIQ_MODE           0x11
#define CPSR_IRQ_MODE           0x12
#define CPSR_SUPERVISOR_MODE    0x13
#define CPSR_UNDEF_MODE         0x1B

#define CPSR_MODE_BITS          0x1F

/*
 *  Define macros to handle section beginning and ends.
 */


#define BEGIN_CODE_DCL .text
#define END_CODE_DCL
#define BEGIN_DATA_DCL .data
#define END_DATA_DCL
#define BEGIN_CODE .text
#define END_CODE
#define BEGIN_DATA
#define END_DATA
#define BEGIN_BSS
#define END_BSS
#define END

/*
 *  Following must be tailor for a particular flavor of the C compiler.
 *  They may need to put underscores in front of the symbols.
 */

#define PUBLIC(sym) .globl SYM (sym)
#define EXTERN(sym) .globl SYM (sym)

#ifdef __thumb__
  #define DEFINE_FUNCTION_ARM(name) \
    .thumb_func ; .globl name ; name: ; bx pc ; \
    .arm ; .globl name ## _arm ; name ## _arm:
#else
  #define DEFINE_FUNCTION_ARM(name) \
    .globl name ; name: ; .globl name ## _arm ; name ## _arm:
#endif

#endif /* _RTEMS_ASM_H */