/*
 * Philps LPC22XX Interrupt handler
 *
 * Copyright (c)  2006 by Ray<rayx.cn@gmail.com>  to support LPC ARM
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *
 *  http://www.rtems.com/license/LICENSE.
 *
 *  $Id$
 */
#include <bsp.h>
#include <irq.h>
#include <rtems/score/thread.h>
#include <rtems/score/apiext.h>
#include <lpc22xx.h>

/*
 * This function check that the value given for the irq line
 * is valid.
 */
static int isValidInterrupt(int irq)
{
  if ( (irq < 0) || (irq >= BSP_MAX_INT))
    return 0;
  return 1;
}

/*
 * Installs the interrupt handler.
 *
 * You should only have to add the code to unmask the interrupt.
 *
 */
int BSP_install_rtems_irq_handler  (const rtems_irq_connect_data* irq)
{
    rtems_interrupt_level level;
    rtems_irq_hdl        *bsp_tbl;
    int                  *vic_cntl;

    bsp_tbl = (rtems_irq_hdl *)VICVectAddrBase;

    vic_cntl=(int *)VICVectCntlBase;

    if (!isValidInterrupt(irq->name)) {
      return 0;
    }

    /*
     * Check if default handler is actually connected. If not issue an error.
     */

    if (bsp_tbl[irq->name] != default_int_handler) {
      return 0;
    }

    rtems_interrupt_disable(level);

    /*
     * store the new handler
     */
    bsp_tbl[irq->name] = irq->hdl;
    /* *(volatile unsigned long*)(VICVectAddr0+(irq->name * 4)&0x7c )= (uint32_t) irq->hdl;*/
    /*
     * Enable interrupt on device
     */
    vic_cntl[irq->name] = 0x20 | irq->name;

    VICIntEnable |= 1 << irq->name;

    if(irq->on)
    {
    	irq->on(irq);
    }


    rtems_interrupt_enable(level);

    return 1;
}

/*
 * Remove and interrupt handler
 *
 * You should only have to add the code to mask the interrupt.
 *
 */
int BSP_remove_rtems_irq_handler  (const rtems_irq_connect_data* irq)
{
    rtems_interrupt_level level;
    rtems_irq_hdl        *bsp_tbl;

    bsp_tbl = (rtems_irq_hdl *)&VICVectAddr0;

    if (!isValidInterrupt(irq->name)) {
      return 0;
    }
    /*
     * Check if the handler is actually connected. If not issue an error.
     */
    if (bsp_tbl[irq->name] != irq->hdl) {
      return 0;
    }

    rtems_interrupt_disable(level);

    VICIntEnClr = 1 << irq->name;

    /*
     * Disable interrupt on device
     */
    if(irq->off) {
        irq->off(irq);
    }
    /*
     * restore the default irq value
     */
    bsp_tbl[irq->name] = default_int_handler;

    rtems_interrupt_enable(level);

    return 1;
}